syspath is not really needed in there, and catching devpath instead
allows us to easily match against DEVPATH_OLD in follow-up patches.
Furthermore, previous code was misleading retrieving syspath in
remove_device() and then passing it as devpath param of check_remove().
when moving a wwanX interface to a lxc container ofono gets "remove" event.
Ignoring the "remove" events allow this to work without ofono is removing
the whole modem
Trying to set the networking mode to "bridge" mode in the plugin is bogus
because the setting does not apply until after the device has been
reset. Instead, the current setting should be queried.
If a user wants to set the modem networking mode, the setting should be
made outside of ofono.
The gprs-context driver has already been adjusted to query the
networking mode and to set things up accordingly.
Depending on the transport used on the data connection we want either
the "atmodem" (PPP) driver or the "ubloxmodem". For the "ubloxmodem",
we want to pass the model data so this patch wrangles some parameters to
make sure that right driver and right variant data are passed.
ttyACM0 (USB interface 02) is reportedly unreliable (breaking DHCP setup)
so the recommended approach is to use ttyACM2 (USB interface 06)
exclusively.
Some aspects of a device are detectable at runtime, like the USB profile
detection that was added in a patch preceding this one. This patch
switches the driver over from creating a new "vendor id" for each
profile to just setting a flag. This is more easily extensible as we
detect other features of the modem.
The TOBY L2 series of modems presents a number of different
configurations with different throughtput characteristics. These
configurations are packaged up as USB profiles; moreover, changing the
profile actually changes the USB model ID so this is even more like
selecting a different "device" altogether. Nonetheless, all we need to
know is which profile is selected in order to set things up correctly
and this can be queried directly.
This patch adds a call to UUSBCONF for applicable modems in order to
query the USB configuration to find out which profile is active.
This patch adds a call to CGMM into the modem_enable path in order to
establish the specific device model. From this device model string, a
model-specific capabilities structure can be selected.
Many ublox modems can sit on either the USB bus or talk directly to a
UART. The udev plugin mostly takes care of figuring out what ports to
talk to and the protocol is common for all devices after that.
This patch simplifies the setup a bit:
i) There must always be an aux channel for communication with the modem
ii) The aux channel may be found behind the string Aux for USB modems
or Device for serial modems
iii) If the Modem string is set, use it; if not set, assume it's not
available.
when the voice call driver is probing, I noticed sometimes
a CME Error with the code = 4 (operation not supported)
related to AT commands "AT+CSSN=1,1" and "AT^SLCC=1".
In the current voice call implementation for Gemalto modems
the ofono_voicecall_create() is called on the gemalto_pre_sim().
The sim is not totaly readed by the module, it is not yet
online which is causing a sporadic problem at driver
intialization also when launching some outgoing/incoming calls.
This change moves the ofono_voicecall_create() to the
gemalto_post_online() to be sure that sim is well registred
and online. Several other call related atoms are also moved to
post_online state.
The plugin for Gemalto modems is enriched with all voice-related atoms,
as well as USSD.
All except the voicecall itself are from the atmodem, while the
voicecall is from gemaltomodem.
There are a large number of files in the tree that define _GNU_SOURCE
despite not actually using features hidden behind this flag. This patch
removes all these definitions in one fell swoop...
support of 'none' in mbpi:
the default method remains CHAP, but it is overridden by NONE after
parsing the entire key for the apn and detecting no username/password
The sim atom is now created with the GEMALTO vendor instead of
CINTERION. This is because GEMALTO has superceeded CINTERION and the
gemalto plugin will be updated to handle (legacy) modems from cinterion
as well as current gemalto devices.
In some case linux report 'driver' as valid yet vid and pid as NULL.
Adding NULL check to prevent seg fault.
Log:
ofonod[23829]: plugins/udevng.c:udev_start()
ofonod[23829]: plugins/udevng.c:enumerate_devices()
ofonod[23829]: plugins/udevng.c:check_usb_device() hub [1d6b:0002]
ofonod[23829]: plugins/udevng.c:check_usb_device() usb [1d6b:0002]
ofonod[23829]: plugins/udevng.c:check_usb_device() usbhid [03f0:034a]
ofonod[23829]: plugins/udevng.c:check_usb_device() usbhid [03f0:034a]
ofonod[23829]: plugins/udevng.c:check_usb_device() usb [1d6b:0002]
ofonod[23829]: plugins/udevng.c:check_usb_device() cdc_acm [(null):(null)]
ofonod[23829]: Aborting (signal 11) [./src/ofonod]
Since the merge of udev.c into udevng.c all cleanup function must handle
both usb devices and serial devices. Add this distinction to
check_remove(), so that is doesn't try to iterate the .serial member as
if it were a .devices list.
The return value from ofono_modem_register was not being checked. If this fails
the modem object is not setup and causes a crash. This was specifically seen
when using the mbim driver without having configured with mbim support.
Now the modem object gets destroyed properly if the modem registration fails.
Add support for the SIM7100E modem. We add a new "sim7100" plugin
because there's no other AT-based modem that has support for both GPRS
and voice calls.
Pau Espin
Alexander Couzens
Jonas Bonn
Antara Borwankar
Pičugins Arsenijs
Khaled Romdhani
Denis Kenzior
Nandini Rebello
Clement Viel
Giacinto Cifelli
Anirudh Gargi
Pavel Machek
Martin Hundebøll
Christophe Ronco
Varun Gargi
James Prestwood
Bob Ham
Mark van der Putten
Jonas Bonn