Apparently, an empty APN in an ofono context means that that the context
cannot be activated. connman definitely interprets it this way.
This patch sets a default name of "automatic" for the default bearer if
no other LTE APN is supplied (which is currently the case as the LTE
atom is not in place yet). Without this, connman happily ignores the
context, even though it has been activated by ofono.
When the modem attaches to an LTE network, a default bearer is
automatically negotiated using the "defalt profile" settings. The
QMI modem, however, does not given any explicit indication that
the bearer exists; instead, we must assume its existence based on
the network registration state.
This patch extends the GPRS atom to signal the presence of a
default bearer when it detects network connectivity on an LTE
network.
Apparently it's not legal to create a QMI service multiple times for
a device. I've been testing with a Quectel EC21 and here it works fine
to do so, but the general case would require "shared" services across
atoms.
This patch switches the users of the NAS and WDS services over to using
a "shared" service instead of each instatiating their own instance.
There are three principal ways for a context to become disconnected:
i) deactivate_primary() is called
ii) the network registration is lost and the context is cleaned up
via _detach_shutdown() (via release_all_contexts())
iii) the network decides to disconnect the context
We need to watch the packet status in order to detect case iii). For
case i) and ii), stop_net will be called, the pkt_handle will be
cleared, and subsequent packet status notifications be ignored.
This patch makes it so that the packet status "disconnected" event
is only propagated when the pkt_handle has not been cleared, indicating
an unrequested disconnection.
This should fix a race reported by Christophe Ronco whereby the packet
status disconnect notification is called between activate_primary
(start_net) and it's callback (start_net_cb).
SMS reception is not working for Gemalto modems because of +CMT parsing.
PDU length is the first argument of +CMT URCs in Gemalto modems.
Add a switch case on vendor info to handle Gemalto case.
Also handle acknowledgment, +CNMA takes only one parameter.
CMT parsing is moved from at_parse_cmt() to at_cmt_notify(). This
function is modified to match the style of at_cmgr_notify() and it
includes a switch case for CINTERION modems.
The detach_shutdown method is invoked to unconditionally release
an active context. For QMI, this is equivalent to a call to
deactivate_primary.
This patch makes the callback to deactivate_primary optional and
implements detach_shutdown to simply call it. When there is no
callback, the stop_net callback notifies ofono about the context
release via an asynchronous ofono_gprs_context_deactivated() call.
For LTE networks, a default bearer is automatically activated when
the modem registers to the network. QMI modems, however, do not
automatically enable the network interface just because the bearer
exists; a call to "start network" needs to be made in order to
get the packet handle before get_settings will return any data and
the network interface can be configured.
This patch makes read_settings call "start network" in order to
enable the interface for the default bearer. No new bearer will
be created with this call and the settings for the bearer will come
from the default profile, irregardless of what parameters are passed
to the "start network" method.
For LTE, a context is created automatically when the modem registers
to the network. The read_settings function is called for these
automatic contexts to get their configuration.
The GPRS context needs to be configured with connection parameters when
the bearer has been established. This was only partially implemented, so
this patch adds additional parameters to those passed to the context.
Calling the ps_state/cs_state alternatives *ATTACH_STATUS* was confusing
because there is also a status field in the *serving_system structure.
This patch does a minor rename and adds the appropriate definitions for
the status field.
qmi_device_shutdown allocated a new orphaned data structure and kicked
off a timeout to wait for the shutdown to complete. The logic was quite
racy, but the main issue was that the timeouts could not be canceled
when the underlying qmi_device object was destroyed. This resulted in
crashes.
This patch switches to first-past-the-gate mechanism. Since only the
modem driver should be issuing a qmi_device_shutdown call, this should
not be a limitation. The shutdown source is then tracked on the
qmi_device object itself and is canceled when the qmi_device object is
freed.
As an added bonus, the shutdown_destroy callback should now actually
function. Before it was simply never called.
struct discovery was allocated for every discovery procedure that was
kicked off, which itself allocated a structure. This patch uses a
class/subclass concept to only allocate a single structure per discovery
procedure.
This function was never removing discovery instances because it was looking
them up in the wrong list. This led to some strangeness with the discovery
callbacks being invoked after the "failure" timeout of 5 seconds and
consequent failures with everything getting out of sync.
With this patch we fix the lookup to use the correct queue. There's also
a double-free in the function that was never being hit before because the
lookups never succeeded; fix that as well.
With this, service discovery and creation work as expected when testing with
an EC21.
Telit AT modem firmware (tested with UE910-EUR) generates
+CGREG: 0\r\n\r\n+CGEV: NW DETACH
after a context is de-activated and ppp connection closed.
Then, after a random amount of time (observed from a few seconds
to a few hours), an unsolicited +CGREG: 1 arrives.
Attempt to fix the problem, by sending AT+CGATT=1 once.
This does not re-activate the context, but if a network connection
is still correct, will generate an immediate +CGREG: 1.
There are various device & service discovery tasks that are initiated
based on a qmi_device object. qmi_device object does not currently
keep track of these tasks. Unfortunately the qmi_device object can
go away at any time, and these tasks can become orphaned.
The result of this can lead to crashes. E.g. a discovery task timeout fires
after the qmi_device object has been destroyed. Since the object is no
longer valid, any accesses to it will likely result in a SEGFAULT.
This patch attempts to track all discovery tasks on the qmi_device
object itself, so that they can be cleaned up properly. This patch does
not handle the qmi_device_shutdown functionality.
Telit QMI modems can return non-utf-8 characters in plmn-desc.
Observed with LE910-SVG and Verizon. When that happens, libdbus
will abort ofono.
If non-utf-8 characters are detected, use mccmnc string.
LTE modems (observed with Telit LE910 V1) can power on
already registered to a network. In that case, the SS_INFO
change notification will never arrive, and the gprs driver
will never be marked as attached.
To avoid this situation, read SS_INFO at probe time, and if
registered, mark the gprs driver as attached.
This was introduced by the previous patch:
drivers/qmimodem/devinfo.c: In function ‘get_ids_cb’:
drivers/qmimodem/devinfo.c:129:14: error: implicit declaration of function ‘strcmp’ [-Werror=implicit-function-declaration]
if (!str || strcmp(str, "0") == 0) {
Command read_file_info on MC7304 always fails.
Using qmicli or AT command, I am able to read file info.
Qmicli command is:
qmicli -d /dev/cdc-wdm0 --uim-get-file-attributes=0x3f00,0x7fff,0x6fad
[(null)] Successfully got file '/dev/cdc-wdm0' attributes from the UIM:
Card result:
SW1: '0x90'
SW2: '0x00'
File attributes:
File size: 4
File ID: 28589
File type: transparent
Record size: 0
Record count: 0
Read security attributes: (always) (null)
Write security attributes: (single) adm
Increase security attributes: (always) (null)
Deactivate security attributes: (single) adm
Activate security attributes: (single) adm
Raw: 62:17:82:02:41:21:83:02:6F:AD:8A:01:05:8B:...
After a check of parameters sent by qmimodem driver and qmicli,
the only difference is on parameter "Session Information".
Session type sent by qmimodem driver is 'Card on slot 1'.
Session type sent by qmicli command is 'primary-gw-provisioning'.
Changing session type in qmimodem driver fixed problem (on this modem).
Comparing with what is done by qmili command
Some modems do not support AT+CGDATA="PPP",X to enter data state.
Use AT+CGDATA=? to detect these modems and for them use ATD*99***X#
to enter data state.
drivers/rilmodem/stk.c: In function ‘ril_stk_probe’:
drivers/rilmodem/stk.c:210:18: error: ‘data’ is used uninitialized in
this function [-Werror=uninitialized]
struct cb_data *cbd = cb_data_new(stk, NULL, data);
sending RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING after
stk atom is created so that modem will inititialize
sim toolkit by sending terminal profile to sim.
During gprs-context driver probe function, check kernel device driver
data format and modem low level data format.
If they are different, align kernel device driver data format on
modem low level data format.
If an error occurs during this process, continue probing without error.
This is inspired by what is done in qmicli and qmi-network (package
libqmi).
Add a way to get and set data format expected by kernel device driver.
This is inspired by what is done in qmicli (package libqmi).
It does not use QMI protocol but a sysfs exported by kernel driver.
To use this feature, kernel version must be equal or more than 4.5.
Network Control Model is a new Communication Device Class
protocol for exchanging Ethernet frames over USB.
NCM is intended to be used with high-speed network
attachments such as HSDPA and LTE data services.
Add a new location-reporting driver for Gemalto Cinterion modems based
on telit implementation + use it in gemalto plugin. It supports
activation of GNSS engine (Request) with command AT^SGPSC. This driver
is tested on PHS8. NMEA frames are accessible on /dev/ttyUSB1.
Retry command QMI_UIM_GET_CARD_STATUS during query_passwd_state if a
temporary error status has been detected.
This happens with a MC7430 modem when query_passwd_state is called just
after PIN is entered.
CGDCONT result parsing fails if first list contains several ranges. For
example with modem Cinterion PHS8:
AT+CGDCONT=?
+CGDCONT: (1-17,101-116),"IP",,,(0),(0-4)
Solution: read first range and jump to second list instead of trying to
close the brackets.
Password state and number of retries asked to modem using
QMI_UIM_GET_CARD_STATUS command rather than remembered after initial
QMI_UIM_GET_CARD_STATUS command.
Add read_imsi feature to qmimodem sim driver.
This is based on DMS service.
On MC7430, this is mandatory to be able to use this driver for GPRS
connection because reading IMSI via EF reads fails.
QMI notification messages handlers are never called on MC7430 without this fix.
- Do not test transaction id before calling notification handler. On MC7430,
notification messages contain a not null transaction id (starts with 1,
increased at each message for a particular client).
- On MC7304 transaction id in notification messages is always 0.
Get current signal strength (type: 0x01), not list of other signals strength
(0x10)
Without this fix:
- I can't get a signal strength on MC7430 because list does not exist
(only one signal strength).
- On MC7304, result is wrong
Jonas Bonn
Vincent Cesson
Denis Kenzior
Lukasz Nowak
Christophe Ronco
Antara Borwankar
Piotr Haber