Entries to the table of notification callbacks can be added by the
callbacks while being called. This caused a glib error as gril was
using an iterator to the hash table while the table was being modified.
Fixed by avoiding the unnecesary loop.
This plugin creates modems that use the rilmodem driver by looking at
environment variables: when OFONO_RIL_DEVICE exists it creates a ril
modem of the sub-type specified by the variable. OFONO_RIL_NUM_SIM_SLOTS
specifies the number of SIM slots for multi-SIM modems.
Plugin for Android modem, which uses the rilmodem driver.
Co-authored-by: Tony Espy <espy@canonical.com>
Co-authored-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
Co-authored-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
Co-authored-by: Islam Amer <islam.amer@jollamobile.com>
Co-authored-by: Jussi Kangas <jussi.kangas@tieto.com>
Co-authored-by: Juho Hämäläinen <juho.hamalainen@tieto.com>
Co-authored-by: Martti Piirainen <martti.piirainen@canonical.com>
Co-authored-by: Jarko Poutiainen <Jarko.Poutiainen@oss.tieto.com>
Co-authored-by: Tommi Kenakkala <tommi.kenakkala@oss.tieto.com>
Co-authored-by: Petri Takalokastari <petri.takalokastari@oss.tieto.com>
Co-authored-by: Miia Leinonen <miia.leinonen@oss.tieto.com>
Co-authored-by: Mikko Hurskainen <mikko.hurskainen@nomovok.com>
Co-authored-by: You-Sheng Yang <vicamo.yang@canonical.com>
Driver for modems that are accessed through the Android Radio Interface
Layer (RIL) for telephony, using the gril library. The driver is almost
feature complete with some exceptions, being CBS and SAT the most
prominent.
Co-authored-by: Tony Espy <espy@canonical.com>
Co-authored-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
Co-authored-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
Co-authored-by: Islam Amer <islam.amer@jollamobile.com>
Co-authored-by: Jussi Kangas <jussi.kangas@tieto.com>
Co-authored-by: Juho Hämäläinen <juho.hamalainen@tieto.com>
Co-authored-by: Petri Takalokastari <petri.takalokastari@oss.tieto.com>
Co-authored-by: Jarko Poutiainen <Jarko.Poutiainen@oss.tieto.com>
Co-authored-by: Tommi Kenakkala <tommi.kenakkala@oss.tieto.com>
Co-authored-by: Miia Leinonen <miia.leinonen@oss.tieto.com>
Co-authored-by: Martti Piirainen <martti.piirainen@canonical.com>
Co-authored-by: You-Sheng Yang <vicamo.yang@canonical.com>
gril is a library used to communicate with rild, the Android telephony
daemon. Communication happens using a named socket over which binder
parcels are transmitted.
Co-authored-by: Tony Espy <espy@canonical.com>
Co-authored-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
Co-authored-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
Co-authored-by: Mikko Hurskainen <mikko.hurskainen@nomovok.com>
Co-authored-by: You-Sheng Yang <vicamo.yang@canonical.com>
Co-authored-by: Ratchanan Srirattanamet <peathot@hotmail.com>
To let others (PulseAudio) be notified when a handsfree device is
connected with us and can be used for audio routing we need to
expose this by registering a audio card with the correct type.
When registering audio cards for the handsfree and gateway roles we
need a way for our users to differentiate between both to decide which
of them they start using for their purpose.
Accept push notifications regardless of the origin port, as some
operators do not insert there the WAP connectionless session service
port, and use random values instead.
When a call is waitng, CCWA event is sent and call object
in state WAITING is created. on ReleaseAndAnswer it is
promoted to INCOMING and later to ACTIVE.
iPhones send an extra CCWA event when active call is ended.
This extra event is creating a second call object in state
WAITING. It is not possible to have two WAITING calls, but
previously waiting call was already promoted to INCOMING.
For a brief time we have two calls from the same number,
one INCOMING and one WAITING. Later WAITING one is removed.
As we cannot have a waiting and incoming call at the same
time, ignore CCWA when there is already an INCOMING call.
< \r\n+CIEV: 3,3\r\n
< \r\n+CIEV: 2,1\r\n
< \r\n+CIEV: 3,0\r\n
< \r\n+CCWA: "01234567890",129,1,"Me"\r\n
< \r\n+CIEV: 3,1\r\n
> AT+CLCC\r
< \r\n+CLCC: 1,0,0,0,0,"09876543210",129,"Me"\r\n
< \r\n+CLCC: 2,1,5,0,0,"01234567890",129,"Me"\r\n
< \r\nOK\r\n
< \r\n+CIEV: 2,0\r\n
< \r\n+CCWA: "01234567890",129,1,"Me"\r\n
< \r\n+CIEV: 2,1\r\n
< \r\n+CIEV: 3,0\r\n
> AT+CLCC\r
< \r\n+CLCC: 2,1,0,0,0,"01234567890",129,"Me"\r\n
< \r\nOK\r\n
It is possible for the phone to accept Dial request
but not actually dial. This leaves a voicecall object
in state 'dialling' that cannot be removed.
Proposed workaround is to trigger AT+CLCC when an error
is returned for Hangup. As the call is not on the list,
this would remove this hanging object and signal CallRemoved.
Windows Phone trace with this fix:
ofonod[273]: > ATD1;\r
ofonod[273]: < \r\nOK\r\n
ofonod[273]: src/voicecall.c:dial_handle_result() Registering new call: 1
ofonod[273]: < \r\n+CIEV: 5,4\r\n
ofonod[273]: src/network.c:ofono_netreg_strength_notify() strength 80
ofonod[273]: > AT+CHUP\r
ofonod[273]: < \r\nERROR\r\n
ofonod[273]: src/voicecall.c:generic_callback() command failed with error: Unknown error type
ofonod[273]: > AT+CLCC\r
ofonod[273]: < \r\nOK\r\n
ofonod[273]: src/voicecall.c:ofono_voicecall_disconnected() Got disconnection event for id: 1, reason: 2
The kernel simply puts a null terminator at index 15 prior to ifr_name
processing. So we do the same.
Original report by:
Sabas Rosales, Blanca E <blanca.e.sabas.rosales@intel.com>
Buffer not null terminated (BUFFER_SIZE_WARNING) buffer_size_warning:
Calling strncpy with a maximum size argument of 16 bytes on destination
array ifr.ifr_ifrn.ifrn_name of size 16 bytes might leave the
destination string unterminated.
92 strncpy(ifr.ifr_name, interface, IFNAMSIZ);
The kernel simply puts a null terminator at index 15 prior to ifr_name
processing. So we do the same.
Original report by:
Sabas Rosales, Blanca E <blanca.e.sabas.rosales@intel.com>
Buffer not null terminated (BUFFER_SIZE_WARNING) buffer_size_warning:
Calling strncpy with a maximum size argument of 16 bytes on destination
array ifr.ifr_ifrn.ifrn_name of size 16 bytes might leave the
destination string unterminated.
67 strncpy(ifr.ifr_name, net->if_name, sizeof(ifr.ifr_name));
It may happen that a Device object is unpaired an paired again
without being removed from DBus. This in turn triggers second
modem object to be created, but not fully initialized.
If this modem object is used, oFono will crash.
CC plugins/u8500.o
plugins/u8500.c: In function ‘reachable_cb’:
plugins/u8500.c:235:28: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
if (!g_isi_msg_error(msg) < 0)
^
CC plugins/n900.o
plugins/n900.c: In function ‘mtc_reachable_cb’:
plugins/n900.c:241:28: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
if (!g_isi_msg_error(msg) < 0)
^
CC plugins/isiusb.o
plugins/isiusb.c: In function ‘reachable_cb’:
plugins/isiusb.c:207:28: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
if (!g_isi_msg_error(msg) < 0)
^
CC gatchat/gatchat.o
gatchat/gatchat.c: In function ‘have_line’:
gatchat/gatchat.c:586:28: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
if (!strncmp(str, "AT", 2) == TRUE)
^
Denis Kenzior
Alfonso Sanchez-Beato
Simon Fels
Tony Espy
Marcel Holtmann
Kuba Pawlak
Johannes 'josch' Schauer
Marko Sulejic