2020-03-27 15:34:35 +00:00
---
title: Now in the Github Issue
head_inline: "< style > . blue { color : blue ; } < / style > "
---
2020-08-22 16:44:11 +00:00
#### Test failed (e.g. `meson test -v`)
2020-03-27 15:34:35 +00:00
Sometimes you may get a message like the one below due to a problem with the freeDiameter library.
```
2020-08-22 16:44:11 +00:00
$ meson test -v
2020-03-27 15:34:35 +00:00
...
2020-08-22 16:44:11 +00:00
5/10 open5gs:5gc / registration OK 4.98 s
s1setup-test : SUCCESS
guti-test : SUCCESS
auth-test : SUCCESS
idle-test : SUCCESS
emm-status-test : SUCCESS
reset-test : SUCCESS
ue-context-test : SUCCESS
2020-03-27 15:34:35 +00:00
All tests passed.
2020-08-22 16:44:11 +00:00
6/10 open5gs:epc / attach OK 4.68 s
bearer-test : SUCCESS
session-test : SUCCESS
rx-test : SUCCESS
All tests passed.
7/10 open5gs:epc / volte OK 4.33 s
2020-03-27 15:34:35 +00:00
--- command ---
2020-08-22 16:44:11 +00:00
08:06:31 /home/parallels/open5gs/build/tests/csfb/csfb
2020-03-27 15:34:35 +00:00
--- stdout ---
2020-08-22 16:44:11 +00:00
csfb-test : ERROR: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:112 ROUTING ERROR 'No remaining suitable candidate to route the message to' for: (../lib/diameter/common/init.c:116)
2020-03-27 15:34:35 +00:00
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 'Credit-Control-Request' (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Version: 0x01 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Length: 20 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Flags: 0xC0 (RP--) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Command Code: 272 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 ApplicationId: 16777238 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Hop-by-Hop Identifier: 0x00000000 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 End-to-End Identifier: 0x2875502B (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 {internal data}: src:(nil)(0) rwb:(nil) rt:0 cb:0x564527642502,(nil)(0x7f71a86df418) qry:(nil) asso:0 sess:0x7f7158001140 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Session-Id'(263) l=8 f=-M val="pgw.localdomain;1585209991;1;app_gx" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Origin-Host'(264) l=8 f=-M val="pgw.localdomain" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Origin-Realm'(296) l=8 f=-M val="localdomain" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Destination-Realm'(283) l=8 f=-M val="localdomain" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Auth-Application-Id'(258) l=12 f=-M val=16777238 (0x1000016) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'CC-Request-Type'(416) l=12 f=-M val='INITIAL_REQUEST' (1 (0x1)) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'CC-Request-Number'(415) l=12 f=-M val=0 (0x0) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Subscription-Id'(443) l=8 f=-M val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Subscription-Id-Type'(450) l=12 f=-M val='END_USER_IMSI' (1 (0x1)) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Subscription-Id-Data'(444) l=8 f=-M val="310014987654004" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Supported-Features'(628) vend='3GPP'(10415) l=12 f=V- val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Feature-List-ID'(629) vend='3GPP'(10415) l=16 f=V- val=1 (0x1) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Feature-List'(630) vend='3GPP'(10415) l=16 f=V- val=11 (0xb) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Network-Request-Support'(1024) vend='3GPP'(10415) l=16 f=VM val=1 (0x1) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Framed-IP-Address'(8) l=8 f=-M val=< 0A 2D 00 02 > (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'IP-CAN-Type'(1027) vend='3GPP'(10415) l=16 f=VM val=5 (0x5) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'RAT-Type'(1032) vend='3GPP'(10415) l=16 f=V- val=1004 (0x3ec) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'QoS-Information'(1016) vend='3GPP'(10415) l=12 f=VM val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'APN-Aggregate-Max-Bitrate-UL'(1041) vend='3GPP'(10415) l=16 f=V- val=1024000000 (0x3d090000) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'APN-Aggregate-Max-Bitrate-DL'(1040) vend='3GPP'(10415) l=16 f=V- val=1024000000 (0x3d090000) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Default-EPS-Bearer-QoS'(1049) vend='3GPP'(10415) l=12 f=V- val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'QoS-Class-Identifier'(1028) vend='3GPP'(10415) l=16 f=VM val=9 (0x9) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Allocation-Retention-Priority'(1034) vend='3GPP'(10415) l=12 f=V- val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Priority-Level'(1046) vend='3GPP'(10415) l=16 f=V- val=15 (0xf) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Pre-emption-Capability'(1047) vend='3GPP'(10415) l=16 f=V- val=1 (0x1) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Pre-emption-Vulnerability'(1048) vend='3GPP'(10415) l=16 f=V- val=0 (0x0) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: '3GPP-User-Location-Info'(22) vend='3GPP'(10415) l=12 f=VM val=< 82 13 00 41 00 33 13 00 41 08 D0 1B 78 > (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: '3GPP-MS-TimeZone'(23) vend='3GPP'(10415) l=12 f=VM val=< 23 00 > (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Called-Station-Id'(30) l=8 f=-M val=< 73 74 61 72 65 6E 74 2E 63 6F 6D > (../lib/diameter/common/init.c:116)
: no_CC-Request-Number (../src/pgw/pgw-fd-path.c:505)
/home/parallels/open5gs/build/src/pgw/../../lib/core/libogscore.so.1(ogs_abort+0x2e)[0x7f71abdbdbf8]
/home/parallels/open5gs/build/src/pgw/open5gs-pgwd(+0x1cb8f)[0x564527642b8f]
/home/parallels/open5gs/build/src/pgw/../../subprojects/freeDiameter/libfdcore/libfdcore.so.7(+0x492d7)[0x7f71ab7702d7]
/home/parallels/open5gs/build/src/pgw/../../subprojects/freeDiameter/libfdcore/libfdcore.so.7(+0x4cb63)[0x7f71ab773b63]
/home/parallels/open5gs/build/src/pgw/../../subprojects/freeDiameter/libfdcore/libfdcore.so.7(+0x4ccef)[0x7f71ab773cef]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x76db)[0x7f71aae686db]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x3f)[0x7f71aab9188f]
03/26 16:06:43.674ERROR: GTP Timeout : IMSI[310014987654004] Message-Type[32] (../src/sgw/sgw-s11-handler.c:39)
FAILED 1 of 1
Failed Tests Total Fail Failed %
===================================================
2020-08-22 16:44:11 +00:00
csfb-test 1 1 100.00%
2020-03-27 15:34:35 +00:00
--- stderr ---
03/26 16:06:43.681: [ERROR: GTP Timeout : IMSI[310014987654004] Message-Type[32] (../src/mme/mme-gtp-path.c:110)
Line 202: Condition is false, but expected true
-------
2020-08-22 16:44:11 +00:00
8/10 open5gs:epc / csfb FAIL 10.57 s (killed by signal 6 SIGABRT)
2020-03-27 15:34:35 +00:00
...
```
I cannot solve the problem exactly at this point.
{: .blue}
Remove all subscriber information using MongoDB Client
```
$ mongo
> use open5gs
switched to db open5gs
> db.subscribers.find() ### Check the test subscriber
> db.subscribers.drop() ### Remove all subscriber
> db.subscribers.find() ### Check that all subscribers are empty
```
Kill all processes.
```bash
$ ps -ef | grep open5gs
2020-08-22 03:33:45 +00:00
$ sudo pkill -9 open5gs-mmed
$ sudo pkill -9 open5gs-sgwcd
$ sudo pkill -9 open5gs-smfd
$ sudo pkill -9 open5gs-amfd
$ sudo pkill -9 open5gs-sgwud
$ sudo pkill -9 open5gs-upfd
2020-03-27 15:34:35 +00:00
$ sudo pkill -9 open5gs-hssd
$ sudo pkill -9 open5gs-pcrfd
2020-08-22 03:33:45 +00:00
$ sudo pkill -9 open5gs-nrfd
$ sudo pkill -9 open5gs-ausfd
$ sudo pkill -9 open5gs-udmd
$ sudo pkill -9 open5gs-udrd
2020-03-27 15:34:35 +00:00
```
2020-08-22 16:44:11 +00:00
Run `meson test -v` again
2020-03-27 15:34:35 +00:00
```
2020-08-22 16:44:11 +00:00
$ meson test -v
ninja: Entering directory `/home/acetcom/Documents/git/open5gs/build'
2020-03-27 15:34:35 +00:00
ninja: no work to do.
2020-08-22 16:44:11 +00:00
list-test : SUCCESS
pool-test : SUCCESS
strings-test : SUCCESS
time-test : SUCCESS
conv-test : SUCCESS
log-test : SUCCESS
pkbuf-test : SUCCESS
memory-test : SUCCESS
rbtree-test : SUCCESS
timer-test : SUCCESS
thread-test : SUCCESS
socket-test : SUCCESS
queue-test : SUCCESS
poll-test : SUCCESS
tlv-test : SUCCESS
fsm-test : SUCCESS
hash-test : SUCCESS
uuid-test : SUCCESS
All tests passed.
1/10 open5gs:unit / core OK 6.89 s
aes-test : SUCCESS
sha-test : SUCCESS
base64-test : SUCCESS
All tests passed.
2/10 open5gs:unit / crypt OK 0.12 s
sctp-test : SUCCESS
All tests passed.
3/10 open5gs:app / sctp OK 0.02 s
s1ap-message-test : SUCCESS
nas-message-test : SUCCESS
gtp-message-test : SUCCESS
sbi-message-test : SUCCESS
security-test : SUCCESS
crash-test : SUCCESS
All tests passed.
4/10 open5gs:unit / unit OK 0.03 s
guti-test : SUCCESS
auth-test : SUCCESS
idle-test : SUCCESS
dereg-test : SUCCESS
identity-test : SUCCESS
gmm-status-test : SUCCESS
ue-context-test : SUCCESS
All tests passed.
5/10 open5gs:5gc / registration OK 4.98 s
s1setup-test : SUCCESS
guti-test : SUCCESS
auth-test : SUCCESS
idle-test : SUCCESS
emm-status-test : SUCCESS
reset-test : SUCCESS
ue-context-test : SUCCESS
All tests passed.
6/10 open5gs:epc / attach OK 4.68 s
bearer-test : SUCCESS
session-test : SUCCESS
rx-test : SUCCESS
All tests passed.
7/10 open5gs:epc / volte OK 4.33 s
mo-idle-test : SUCCESS
mt-idle-test : SUCCESS
mo-active-test : SUCCESS
mt-active-test : SUCCESS
mo-sms-test : SUCCESS
mt-sms-test : SUCCESS
crash-test : SUCCESS
All tests passed.
8/10 open5gs:epc / csfb OK 4.08 s
epc-test : SUCCESS
All tests passed.
9/10 open5gs:app / 310014 OK 2.37 s
epc-x2-test : SUCCESS
epc-s1-test : SUCCESS
All tests passed.
10/10 open5gs:app / handover OK 4.78 s
Ok: 10
2020-03-27 15:34:35 +00:00
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
```
**Note:** If your test result more than once is same as above, there should be no problem with code you modified.
{: .notice--danger}
#### Is it possible to setup IP/NAT table along with Docker?
Enable IP Forward.
```
$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
```
The following is the default docker IP/NAT table.
```
$ sudo iptables-save
# Generated by iptables-save v1.6.1 on Sat Jun 1 23:43:50 2019
*nat
:PREROUTING ACCEPT [74:4820]
:INPUT ACCEPT [4:208]
:OUTPUT ACCEPT [49:3659]
:POSTROUTING ACCEPT [49:3659]
:DOCKER - [0:0]
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
-A DOCKER -i docker0 -j RETURN
COMMIT
# Completed on Sat Jun 1 23:43:50 2019
# Generated by iptables-save v1.6.1 on Sat Jun 1 23:43:50 2019
*filter
:INPUT ACCEPT [651:514108]
:FORWARD DROP [70:4612]
:OUTPUT ACCEPT [590:63846]
:DOCKER - [0:0]
:DOCKER-ISOLATION-STAGE-1 - [0:0]
:DOCKER-ISOLATION-STAGE-2 - [0:0]
:DOCKER-USER - [0:0]
-A FORWARD -j DOCKER-USER
-A FORWARD -j DOCKER-ISOLATION-STAGE-1
-A FORWARD -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o docker0 -j DOCKER
-A FORWARD -i docker0 ! -o docker0 -j ACCEPT
-A FORWARD -i docker0 -o docker0 -j ACCEPT
-A DOCKER-ISOLATION-STAGE-1 -i docker0 ! -o docker0 -j DOCKER-ISOLATION-STAGE-2
-A DOCKER-ISOLATION-STAGE-1 -j RETURN
-A DOCKER-ISOLATION-STAGE-2 -o docker0 -j DROP
-A DOCKER-ISOLATION-STAGE-2 -j RETURN
-A DOCKER-USER -j RETURN
COMMIT
# Completed on Sat Jun 1 23:43:50 2019
```
Create **newtables** file as below.
```diff
$ diff -u oldtables newtables
--- oldtables 2019-06-01 23:43:50.354974226 +0900
+++ newtables 2019-06-01 23:44:16.110931684 +0900
@@ -8,6 +8,7 @@
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
+-A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
-A DOCKER -i docker0 -j RETURN
COMMIT
# Completed on Sat Jun 1 23:43:50 2019
@@ -26,6 +27,10 @@
-A FORWARD -o docker0 -j DOCKER
-A FORWARD -i docker0 ! -o docker0 -j ACCEPT
-A FORWARD -i docker0 -o docker0 -j ACCEPT
+-A FORWARD -o ogstun -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
+-A FORWARD -o ogstun -j DOCKER
+-A FORWARD -i ogstun ! -o ogstun -j ACCEPT
+-A FORWARD -i ogstun -o ogstun -j ACCEPT
-A DOCKER-ISOLATION-STAGE-1 -i docker0 ! -o docker0 -j DOCKER-ISOLATION-STAGE-2
-A DOCKER-ISOLATION-STAGE-1 -j RETURN
-A DOCKER-ISOLATION-STAGE-2 -o docker0 -j DROP
```
And then, apply **newtables** as below.
```
$ sudo iptables-restore < newtables
```
The above operation is the same as described in the following manuals.
```
### Check IP Tables
$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
### Check NAT Tables
$ sudo iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
### Enable IPv4 Forwarding
$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
### Add NAT Rule
$ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
```
2020-08-22 16:44:11 +00:00
#### How to use a different APN for each SMF
2020-03-27 15:34:35 +00:00
2020-08-22 16:44:11 +00:00
By default, MME selects the SMF as the first SMF node. To use a different APN for each SMF, specify gtpc.apn as the APN name. If the HSS uses WebUI to set the SMF IP for each UE, you can use a specific SMF node for each UE.
2020-03-27 15:34:35 +00:00
See the following example.
```
2020-08-22 16:44:11 +00:00
### For reference, see `smf.yaml`
2020-03-27 15:34:35 +00:00
#
2020-08-22 16:44:11 +00:00
# smf:
#
# <GTP-C Client>
#
# o By default, the SMF uses the first SMF node.
# - To use a different APN for each SMF, specify gtpc.apn as the APN name.
# - If the HSS uses WebUI to set the SMF IP for each UE,
# you can use a specific SMF node for each UE.
#
# o Two SMF are defined. 127.0.0.4:2123 is used.
# [fe80::3%@loopback_devname@]:2123 is ignored.
2020-03-27 15:34:35 +00:00
# gtpc:
2020-08-22 16:44:11 +00:00
# - addr: 127.0.0.4
# - addr: fe80::3%@loopback_devname@
2020-03-27 15:34:35 +00:00
#
2020-08-22 16:44:11 +00:00
# o One SMF is defined. if prefer_ipv4 is not true,
# [fe80::3%@loopback_devname@] is selected.
2020-03-27 15:34:35 +00:00
# gtpc:
# - addr:
2020-08-22 16:44:11 +00:00
# - 127.0.0.4
# - fe80::3%@loopback_devname@
2020-03-27 15:34:35 +00:00
#
2020-08-22 16:44:11 +00:00
# o Two SMF are defined with a different APN.
# - Note that if SMF IP for UE is configured in HSS,
2020-03-27 15:34:35 +00:00
# the following configurion for this UE is ignored.
# gtpc:
2020-08-22 16:44:11 +00:00
# - addr: 127.0.0.4
2020-03-27 15:34:35 +00:00
# apn: internet
# - addr: 127.0.0.5
# apn: volte
#
2020-08-22 16:44:11 +00:00
# o If APN is omitted, the default APN uses the first SMF node.
2020-03-27 15:34:35 +00:00
# gtpc:
2020-08-22 16:44:11 +00:00
# - addr: 127.0.0.4
2020-03-27 15:34:35 +00:00
# - addr: 127.0.0.5
# apn: volte
```
The IP address of the UE can also use a different UE pool depending on the APN.
```
2020-08-22 16:44:11 +00:00
### For reference, see `smf.yaml`
# <PDN Configuration with UE Pool>
2020-03-27 15:34:35 +00:00
#
# o IPv4 Pool
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
#
2020-08-22 16:44:11 +00:00
# pdn:
2020-03-27 15:34:35 +00:00
# addr: 10.45.0.1/16
#
# o IPv4/IPv6 Pool
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
# $ sudo ip addr add cafe:1::1/64 dev ogstun
#
2020-08-22 16:44:11 +00:00
# pdn:
2020-03-27 15:34:35 +00:00
# - addr: 10.45.0.1/16
# - addr: cafe:1::1/64
#
#
# o Specific APN(e.g 'volte') uses 10.46.0.1/16, cafe:2::1/64
# All other APNs use 10.45.0.1/16, cafe:1::1/64
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
# $ sudo ip addr add 10.46.0.1/16 dev ogstun
# $ sudo ip addr add cafe:1::1/64 dev ogstun
# $ sudo ip addr add cafe:2::1/64 dev ogstun
#
2020-08-22 16:44:11 +00:00
# pdn:
2020-03-27 15:34:35 +00:00
# - addr: 10.45.0.1/16
# - addr: cafe:1::1/64
# - addr: 10.46.0.1/16
# apn: volte
# - addr: cafe:2::1/64
# apn: volte
#
# o Multiple Devices (default: ogstun)
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
# $ sudo ip addr add cafe:1::1/64 dev ogstun2
# $ sudo ip addr add 10.46.0.1/16 dev ogstun3
# $ sudo ip addr add cafe:2::1/64 dev ogstun3
#
2020-08-22 16:44:11 +00:00
# pdn:
2020-03-27 15:34:35 +00:00
# - addr: 10.45.0.1/16
# - addr: cafe:1::1/64
# dev: ogstun2
# - addr: 10.46.0.1/16
# apn: volte
# dev: ogstun3
# - addr: cafe:2::1/64
# apn: volte
# dev: ogstun3
#
2020-08-22 16:44:11 +00:00
# o Pool Range Sample
# pdn:
# - addr: 10.45.0.1/24
# range: 10.45.0.100-10.45.0.200
#
# pdn:
# - addr: 10.45.0.1/24
# range:
# - 10.45.0.5-10.45.0.50
# - 10.45.0.100-
#
# pdn:
# - addr: 10.45.0.1/24
# range:
# - -10.45.0.200
# - 10.45.0.210-10.45.0.220
#
# pdn:
# - addr: 10.45.0.1/16
# range:
# - 10.45.0.100-10.45.0.200
# - 10.45.1.100-10.45.1.200
# - addr: cafe::1/64
# range:
# - cafe::a0-cafe:b0
# - cafe::c0-cafe:d0
#
2020-03-27 15:34:35 +00:00
```
#### Failing to run `./open5gs-mmed`
You might be getting the following error after running `./open5gs-mmed` .
```bash
$ ./build/src/mme/open5gs-mmed
10/27 16:45:41.912: [app] FATAL: cannot open file `/Users/acetcom/Documents/git/open5gs/install/etc/open5gs/mme.yaml` (../lib/app/ogs-config.c:67)
10/27 16:45:41.912: [app] FATAL: Open5GS initialization failed. Aborted (../src/main.c:211)
```
You should perform **the installation process** .
```bash
$ ninja -C build install
```
#### How to connect MongoDB server
If you do not start MongoDB, you will get the following error:
```bash
$ ./install/bin/open5gs-hssd
Open5GS daemon v1.0.0
10/27 16:45:00.371: [app] INFO: Configuration: '/Users/acetcom/Documents/git/open5gs/install/etc/open5gs/hss.yaml' (../src/main.c:54)
10/27 16:45:00.372: [app] INFO: File Logging: '/Users/acetcom/Documents/git/open5gs/install/var/log/open5gs/hss.log' (../src/main.c:57)
10/27 16:45:00.377: [dbi] ERROR: Failed to connect to server [mongodb://localhost/open5gs] (../lib/dbi/ogs-mongoc.c:91)
10/27 16:45:00.377: [app] ERROR: Failed to intialize HSS (../src/hss/app-init.c:28)
```
You can start MongoDB using systemctl.
```bash
$ sudo systemctl start mongodb
```
2020-08-22 03:33:45 +00:00
#### I have some error when running `./build/test/attach/attach`
2020-03-27 15:34:35 +00:00
2020-08-22 03:33:45 +00:00
Did you see the following error after executing `./build/test/attach/attach` ?
2020-03-27 15:34:35 +00:00
```bash
2020-07-10 21:27:45 +00:00
$ ./build/test/epc/simple
2020-03-27 15:34:35 +00:00
s1setup_test : SUCCESS
attach_test : -Line 134: Condition is false, but expected true
\04/09 15:49:09.285: [esm] FATAL: esm_handle_pdn_connectivity_request: Assertion `SECURITY_CONTEXT_IS_VALID(mme_ue)' failed. (esm_handler.c:29)
/home/acetcom/Documents/git/open5gs/open5gs/lib/ogslib/src/core/.libs/libogscore-1.0.so.0(ogs_abort+0x2b)[0x7f608518271b]
2020-05-25 16:15:22 +00:00
/home/acetcom/Documents/git/open5gs/open5gs/test/.libs/simple(+0x92121)[0x55dc9e274121]
/home/acetcom/Documents/git/open5gs/open5gs/test/.libs/simple(+0x4f5b9)[0x55dc9e2315b9]
2020-03-27 15:34:35 +00:00
```
Remove all subscriber information using MongoDB Client
```
$ mongo
> db.subscribers.find() ### Check the test subscriber
> db.subscribers.drop() ### Remove all subscriber
> db.subscribers.find() ### Check that all subscribers are empty
```
Kill all processes.
```bash
2020-08-22 16:44:11 +00:00
$ ps -ef | grep attach
2020-03-27 15:34:35 +00:00
$ ps -ef | grep open5gs
2020-08-22 16:44:11 +00:00
$ sudo pkill -9 attach
2020-03-27 15:34:35 +00:00
$ sudo pkill -9 open5gs-mmed ...
```
2020-08-22 16:44:11 +00:00
Execute `./build/test/attach/attach`
2020-03-27 15:34:35 +00:00
```bash
2020-08-22 16:44:11 +00:00
$ ./build/test/attach/attach
2020-03-27 15:34:35 +00:00
```
2020-08-22 03:33:45 +00:00
#### My gNB/eNB does not support IPv6.
2020-03-27 15:34:35 +00:00
Your eNodeB don't have to support IPv6.
2020-08-22 03:33:45 +00:00
If the sgwu.gtpu configuration does not have an IPv6 address, the gNB/eNB can use IPv4 to connect to the MME and SGW-U. If the sgwu.gtpu setting has an IPv6 address, you can disable the IPv6 address as shown below.
2020-03-27 15:34:35 +00:00
```yaml
parameter:
no_ipv6: true
```
2020-08-22 03:33:45 +00:00
**Note:** This parameter `no_ipv6` is only applied to NFs such as AMF, MME, SGW-C, and so on. The parameter `no_ipv6` does not affect to UE. So, IPv6-enabled UE can connect to Open5GS LTE network.
2020-03-27 15:34:35 +00:00
{: .notice--warning}
#### Unable to add new user by WebUI
It might be a CSRF token mismatch error.
Please, delete corresponding cookies, cache, session data etc.
#### Change Domain from localdomain to anything else
You should configure the domain name on your computer. Otherwise, freeDiameter raise an error.
#### How many of UEs can Open5GS support?
See the [lib/core/ogs-3gpp-types.h ](https://github.com/{{ site.github_username }}/open5gs/blob/master/lib/core/ogs-3gpp-types.h ).
```
#define MAX_NUM_OF_ENB 128
#define MAX_NUM_OF_UE 128
#define MAX_NUM_OF_SESS 4
#define MAX_NUM_OF_BEARER 4
#define MAX_NUM_OF_TUNNEL 3 /* Num of Tunnel per Bearer */
#define MAX_NUM_OF_PF 16 /* Num of Packet Filter per Bearer */
#define MAX_POOL_OF_UE (MAX_NUM_OF_ENB * MAX_NUM_OF_UE)
#define MAX_POOL_OF_SESS (MAX_POOL_OF_UE * MAX_NUM_OF_SESS)
#define MAX_POOL_OF_BEARER (MAX_POOL_OF_SESS * MAX_NUM_OF_BEARER)
#define MAX_POOL_OF_TUNNEL (MAX_POOL_OF_BEARER * MAX_NUM_OF_TUNNEL)
#define MAX_POOL_OF_PF (MAX_POOL_OF_BEARER * MAX_NUM_OF_PF)
#define MAX_POOL_OF_DIAMETER_SESS (MAX_POOL_OF_UE * MAX_NUM_OF_SESS)
```
Currently, the number of UE is limited to `128*128` .
#### What is the Default Configuration?
- Network
```
2020-08-22 03:33:45 +00:00
* MongoDB : 127.0.0.1
* MME : 127.0.0.2
* SGW-C : 127.0.0.3
* SMF : 127.0.0.4
* AMF : 127.0.0.5
* SGW-U : 127.0.0.6
* UPF : 127.0.0.7
* HSS : 127.0.0.8
* PCRF : 127.0.0.9
* NRF : 127.0.0.10
* AUSF : 127.0.0.11
* UDM : 127.0.0.12
* UDR : 127.0.0.13
```
2020-03-27 15:34:35 +00:00
2020-08-22 03:33:45 +00:00
- AMF_ID, TAC and S_NSSAI
2020-03-27 15:34:35 +00:00
2020-08-22 03:33:45 +00:00
```
* AMF_ID
PLMN ID - MNC: 901, MCC: 70
Region : 2
Set : 1
2020-03-27 15:34:35 +00:00
2020-08-22 03:33:45 +00:00
* TAI
PLMN ID - MNC: 901, MCC: 70
TAC : 1
2020-03-27 15:34:35 +00:00
2020-08-22 03:33:45 +00:00
* S_NSSASI
SST : 1
2020-03-27 15:34:35 +00:00
```
- GUMMEI, PLMN and TAC
```
* GUMMEI
2020-08-22 03:33:45 +00:00
PLMN ID - MNC: 901, MCC: 70
2020-03-27 15:34:35 +00:00
MME Group : 2
MME Code : 1
* TAI
2020-08-22 03:33:45 +00:00
PLMN ID - MNC: 901, MCC: 70
TAC : 1
2020-03-27 15:34:35 +00:00
```
- Security
```
2020-08-22 03:33:45 +00:00
* Integrity : NIA1/EIA1 - Snow 3G
* Ciphering : NEA0/EEA0 - Nothing
2020-03-27 15:34:35 +00:00
```
- UE Network
```
* IPv4 : 10.45.0.1/16
* IPv6 : cafe::1/64
```
- DNS
```
* IPv4
Primary : 8.8.8.8
Secondary : 8.8.4.4
* IPv6
Primary : 2001:4860:4860::8888
Secondary : 2001:4860:4860::8844
```
#### The parsing errors are caused by tab spaces in the configuration files.
YAML forbids tabs. You should use space instead of tab in Open5GS configuration file.
```markdown
YAML FAQ: Why does YAML forbid tabs?
Tabs have been outlawed since they are treated differently by different editors and tools. And since indentation is so critical to proper interpretation of YAML, this issue is just too tricky to even attempt. Indeed Guido van Rossum of Python has acknowledged that allowing TABs in Python source is a headache for many people and that were he to design Python again, he would forbid them.
```
#### Cross compilation setup
By default, Open5GS is designed to support the Embedding System. To do so, we introduced pool-based memory management. Unfortunately, we have not tested Open5GS in an embedded environment. I tried to compile on the ARM architecture using Docker and run it with QEMU for your reference.
- We'll use Debian Docker Environment.
```bash
2020-08-22 03:33:45 +00:00
$ git clone https://github.com/open5gs/open5gs
2020-03-27 15:34:35 +00:00
$ cd open5gs/docker
$ DIST=debian TAG=stretch docker-compose run dev
```
- In Docker Container
```bash
$ sudo dpkg --add-architecture armel
$ sudo apt update
$ sudo apt install libsctp-dev:armel libyaml-dev:armel libgnutls28-dev:armel libgcrypt-dev:armel libidn11-dev:armel libssl-dev:armel libmongoc-dev:armel libbson-dev:armel
$ sudo apt install crossbuild-essential-armel
$ sudo apt install qemu
$ git clone https://github.com/acetcom/open5gs
$ cd open5gs/
$ cat < < EOF > cross_file.txt
[host_machine]
system = 'linux'
cpu_family = 'x86_64'
cpu = 'x86_64'
endian = 'little'
[binaries]
c = '/usr/bin/arm-linux-gnueabi-gcc'
ar = '/usr/bin/arm-linux-gnueabi-ar'
strip = '/usr/bin/arm-linux-gnueabi-strip'
pkgconfig = '/usr/bin/arm-linux-gnueabi-pkg-config'
[properties]
needs_exe_wrapper = true
EOF
$ meson build --prefix=`pwd`/install --cross-file cross_file.txt
$ ninja -C build
$ qemu-arm ./install/bin/open5gs-sgwd
Open5GS daemon v1.0.0
10/28 06:47:36.649: [app] INFO: Configuration: '/home/acetcom/git/open5gs/install/etc/open5gs/sgw.yaml' (../src/main.c:54)
10/28 06:47:36.652: [app] INFO: File Logging: '/home/acetcom/git/open5gs/install/var/log/open5gs/sgw.log' (../src/main.c:57)
Unknown host QEMU_IFLA type: 50
Unknown host QEMU_IFLA type: 51
Unknown host QEMU_IFLA type: 40
Unknown host QEMU_IFLA type: 41
Unknown host QEMU_IFLA type: 47
Unknown host QEMU_IFLA type: 48
Unknown host QEMU_IFLA type: 43
Unknown host QEMU_IFLA type: 50
Unknown host QEMU_IFLA type: 51
Unknown host QEMU_IFLA type: 40
Unknown host QEMU_IFLA type: 41
Unknown host QEMU_IFLA type: 47
Unknown host QEMU_IFLA type: 48
Unknown host QEMU_IFLA type: 43
Unknown QEMU_IFLA_INFO_KIND tun
Unknown host QEMU_IFLA type: 50
Unknown host QEMU_IFLA type: 51
Unknown host QEMU_IFLA type: 40
Unknown host QEMU_IFLA type: 41
Unknown host QEMU_IFLA type: 47
Unknown host QEMU_IFLA type: 48
Unknown host QEMU_IFLA type: 43
10/28 06:47:36.683: [app] INFO: SGW initialize...done (../src/sgw/app-init.c:31)
10/28 06:47:36.696: [gtp] INFO: gtp_server() [127.0.0.2]:2123 (../lib/gtp/path.c:32)
10/28 06:47:36.697: [gtp] INFO: gtp_server() [172.18.0.2]:2152 (../lib/gtp/path.c:32)
^C10/28 06:47:37.324: [app] INFO: SIGINT received (../src/main.c:73)
10/28 06:47:37.325: [app] INFO: Open5GS daemon terminating... (../src/main.c:229)
10/28 06:47:37.337: [app] INFO: SGW terminate...done (../src/sgw/app-init.c:39)
$ qemu-arm ./install/bin/open5gs-hssd
Open5GS daemon v1.0.0
10/28 06:47:39.021: [app] INFO: Configuration: '/home/acetcom/git/open5gs/install/etc/open5gs/hss.yaml' (../src/main.c:54)
10/28 06:47:39.024: [app] INFO: File Logging: '/home/acetcom/git/open5gs/install/var/log/open5gs/hss.log' (../src/main.c:57)
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
10/28 06:47:39.044: [dbi] INFO: MongoDB URI: 'mongodb://mongodb/open5gs' (../lib/dbi/ogs-mongoc.c:99)
getsockopt level=132 optname=0 not yet supported
10/28 06:47:41.917: [diam] ERROR: ../subprojects/freediameter/libfdcore/sctp.c:86 ERROR: in '(getsockopt(sk, IPPROTO_SCTP, 0, & rtoinfo, & sz))' : Operation not supported (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/sctp.c:778 ERROR: in '((fd_setsockopt_prebind(*sock)))' : Operation not supported (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/cnxctx.c:181 ERROR: in '(fd_sctp_create_bind_server( & cnx->cc_socket, cnx->cc_family, ep_list, port ))' : Operation not supported (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/server.c:355 ERROR: in '(s->conn = fd_cnx_serv_sctp(fd_g_config->cnf_port, empty_conf_ep ? ((void *)0) : & fd_g_config->cnf_endpoints))' : Transport endpoint is not connected (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/core.c:300 ERROR: in '((fd_servers_start()))' : Transport endpoint is not connected (../lib/diameter/common/init.c:116)
10/28 06:47:41.920: [diam] ERROR: ../lib/diameter/common/init.c:62 ERROR: in '(fd_core_start())' : Transport endpoint is not connected (../lib/diameter/common/init.c:116)
10/28 06:47:41.920: [diam] INFO: [6]: ../subprojects/freediameter/libfdcore/core.c:329 Initiating freeDiameter shutdown sequence (2) (../lib/diameter/common/init.c:127)
10/28 06:47:42.057: [hss] FATAL: hss_fd_init: Assertion `ret == 0' failed. (../src/hss/hss-fd-path.c:681)
```
The SCTP module is not included in the QEMU kernel. I believe that if the Linux kernel installed on your target platform contains an SCTP module, it will work normally.
{: .notice--warning}
