forked from acouzens/open5gs
Update document [#495]
This commit is contained in:
parent
dd67b1e533
commit
d711b26dfa
|
@ -35,7 +35,7 @@ If you want to use GPS antenna, setup your devices in the following order:
|
|||
{: .notice--warning}
|
||||
|
||||
Then, setup the USRP B200/B210 as below:
|
||||
1. **4x Small Antennas** should be connected to USRP Rx/Tx ports (RF-A/RF-B)
|
||||
1. **Small Antennas** should be connected to USRP Rx/Tx ports (RF-A/RF-B)
|
||||
2. USRP powered via power supply or over **USB 3.0**
|
||||
3. USRP **USB 3.0** port connected to your PC
|
||||
|
||||
|
@ -388,50 +388,24 @@ Now, run the srsENB as follows:
|
|||
```bash
|
||||
$ cd srsenb/
|
||||
$ sudo ../build/srsenb/src/srsenb ./enb.conf
|
||||
linux; GNU C++ version 6.2.0 20161027; Boost_106200; UHD_003.009.005-0-unknow
|
||||
|
||||
Built in Release mode using commit d045213fb on branch HEAD.
|
||||
|
||||
--- Software Radio Systems LTE eNodeB ---
|
||||
|
||||
Reading configuration file ./enb.conf...
|
||||
-- Loading firmware image: /usr/share/uhd/images/usrp_b200_fw.hex...
|
||||
Opening USRP with args: "",master_clock_rate=30.72e6
|
||||
-- Detected Device: B200
|
||||
-- Loading FPGA image: /usr/share/uhd/images/usrp_b200_fpga.bin... done
|
||||
-- Operating over 'USB 2'.
|
||||
-- Detecting internal GPSDO.... 'No GPSDO found'
|
||||
-- Initialize CODEC control...
|
||||
-- Initialize Radio control...
|
||||
-- Performing register loopback test... pass
|
||||
-- Performing CODEC loopback test... pass
|
||||
-- Asking for clock rate 30.720000 MHz...
|
||||
-- Actually got clock rate 30.720000 MHz.
|
||||
-- Performing timer loopback test... pass
|
||||
Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
|
||||
Setting Sampling frequency 11.52 MHz
|
||||
|
||||
==== eNodeB started ===
|
||||
Type <t> to view trace
|
||||
```
|
||||
If you see the `No GPSDO found`, please exit the program with Ctrl-C.
|
||||
And also, if you see the `USB 2`, it will not be working properly.
|
||||
|
||||
The following console output is the correct result of srsENB.
|
||||
```bash
|
||||
linux; GNU C++ version 6.2.0 20161027; Boost_106200; UHD_003.009.005-0-unknow
|
||||
|
||||
--- Software Radio Systems LTE eNodeB ---
|
||||
|
||||
Reading configuration file ./enb.conf...
|
||||
Opening USRP with args: "",master_clock_rate=30.72e6
|
||||
-- Detected Device: B200
|
||||
-- Operating over USB 3.
|
||||
-- Initialize CODEC control...
|
||||
-- Initialize Radio control...
|
||||
-- Performing register loopback test... pass
|
||||
-- Performing CODEC loopback test... pass
|
||||
-- Asking for clock rate 30.720000 MHz...
|
||||
-- Actually got clock rate 30.720000 MHz.
|
||||
-- Performing timer loopback test... pass
|
||||
Opening 1 RF devices with 1 RF channels...
|
||||
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
|
||||
[INFO] [LOGGING] Fastpath logging disabled at runtime.
|
||||
Opening USRP with args: type=b200,master_clock_rate=23.04e6
|
||||
[INFO] [B200] Detected Device: B200
|
||||
[INFO] [B200] Operating over USB 3.
|
||||
[INFO] [B200] Initialize CODEC control...
|
||||
[INFO] [B200] Initialize Radio control...
|
||||
[INFO] [B200] Performing register loopback test...
|
||||
[INFO] [B200] Register loopback test passed
|
||||
[INFO] [B200] Asking for clock rate 23.040000 MHz...
|
||||
[INFO] [B200] Actually got clock rate 23.040000 MHz.
|
||||
Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
|
||||
Setting Sampling frequency 11.52 MHz
|
||||
|
||||
|
|
Loading…
Reference in New Issue