This information will be required by the Gn interface in MME when
answering an SGSN with an "SGSN Context Response" message during MS cell
reselection EUTRAN->GERAN.
* [AMF/MME] UEContextReleaseCommand in Integrity (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
* [AMF/MME] UEContextReleaseCommand after Interity Protected (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
Allow network operators to omit the time zone in the 4G EMM Information
and 5G Configuration Update. This is useful for better compatibility
with some UEs.
The parameter is optional according to:
* 4G: 3GPP TS 24.301 Table 8.2.13.1
* 5G: 3GPP TS 24.501 Table 8.2.19.1.1
amf_ue->mac_failed flag to be cleared during security mode procedure but it was not.
At this point, the only way to cleare the amf_ue->mac_failed flag is by UE Context Release.
But I'd like to connect UEs as fast as possible without UE Context Release.
Based on the standard document below, when the UE is in the IDLE state,
we checked the implicit timer and tried to send a message to the UE,
but it doesn't work properly.
So, first of all, I deleted the related code.
- TS 24.301 Ch 5.3.7
If ISR is not activated, the network behaviour upon expiry of
the mobile reachable timer is network dependent, but typically
the network stops sending paging messages to the UE on the
first expiry, and may take other appropriate actions
- TS 24.501 Ch 5.3.7
The network behaviour upon expiry of the mobile reachable timer is network dependent,
but typically the network stops sending paging messages to the UE on the first expiry,
and may take other appropriate actions.
Move the config to the sgsn node instead of having a specific route with
specific format "default: route", since anyway internally it's already
applied to the sgsn object.
The 'data' struct used to specify the diameter dispatch options for the
MME callbacks was not being initialized properly, which meant that the
App id could contain garbage. This was preventing the callbacks from
being invoked when receiving ISD/CLR requests.
ogs_pool_init() shall be used in the initialization routine.
Otherwise, memory will be fragment since this function uses system malloc()
Compared with ogs_pool_init()
ogs_pool_create() could be called while the process is running,
so this function should use ogs_malloc() instead of system malloc()
TS33.401
7 Security procedures between UE and EPS access network elements
7.2 Handling of user-related keys in E-UTRAN
7.2.7 Key handling for the TAU procedure when registered in E-UTRAN
If the "active flag" is set in the TAU request message or
the MME chooses to establish radio bearers when there is pending downlink
UP data or pending downlink signalling, radio bearers will be established
as part of the TAU procedure and a KeNB derivation is necessary.
o TS24.301(4G/LTE)
5.5.1 Attach procedure
5.5.1.2 Attach procedure for EPS services
5.5.1.2.4 Attach accepted by the network
If the attach request is accepted by the network,
the MME shall delete the stored UE radio capability information
or the UE radio capability ID, if any.
o TS24.501(5G)
5.5.2 De-registration procedure
5.5.2.1 General
When the AMF enters the state 5GMM-DEREGISTERED for 3GPP access,
the AMF shall delete the stored UE radio capability information
or the UE radio capability ID, if any.
o Generate the private key as below.
$ openssl genpkey -algorithm X25519 -out /etc/open5gs/hnet/curve25519-1.key
$ openssl ecparam -name prime256v1 -genkey -conv_form compressed -out /etc/open5gs/hnet/secp256r1-2.key
o The private and public keys can be viewed with the command.
The public key is used when creating the SIM.
$ openssl pkey -in /etc/open5gs/hnet/curve25519-1.key -text
$ openssl ec -in /etc/open5gs/hnet/secp256r1-2.key -conv_form compressed -text
In ausf/udm.yaml
hnet:
o Home network public key identifier(PKI) value : 1
Protection scheme identifier : ECIES scheme profile A
- id: 1
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 2
Protection scheme identifier : ECIES scheme profile B
- id: 2
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
o Home network public key identifier(PKI) value : 3
Protection scheme identifier : ECIES scheme profile A
- id: 3
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 4
Protection scheme identifier : ECIES scheme profile B
- id: 4
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
Related to #1779
Even if the configured log level for the application was set to "error",
the first "info" message of the metrics library was output to the log.
Reorder the initialization of the metrics library.
* Cancel Location while Idle Fix
* Forgot about SGSAP on MME Change.
Added "action" to sgsap_send_detach..
* Make handle_clr uniform with other handlers
* Added Robustness for Any Detach Type
* Memory wasn't freed upon CLR for unknown IMSIs
* Moving MME Detach to new PR
* [MME] Support for Insert Subscriber Data
* Supported AVPs in IDR will overwrite existing subscription information
* Provide error on partial APN updates
* IDR and ULA use same function to process AVPs
* Move subdatamask values into s6a, so both HSS and MME can use them
* Updates are not actioned at this time. A Re-attach is required for
most changes to take effect
* Memory issue on IDR exceptions
* Remove of handling MSIDSN change until DSR is used
Without this change, using metrics with core setup configurations
(configs/vonr.yaml for example) would not be possible. Having one
metrics section for whole config file causes every NF to start metrics
server on same port causing an abort.
== Known limitation ==
Placing npcf-smpolicycontrol and pcf-policyauthorization
in different NFs is not supported. Both npcf-smpolicycontrol
and pcf-policyauthorization should be placed in the same NF.
* Add Diameter Dictionary Elements
* Initial IDR Framework
* Resolve Compile Issues
* Moving Closer
* Compile error
* Somewhat Working stuffing Code
* Add Timestamp Changes
* Cleanup some of this code. mme_s6a_handle_idr in s6a-handler.c removed for now, since it will only come in handy when IDR flag is set to request current location, which would involve breaking out into paging. I think there's a few other things we can do just within fd-path first.
* further removal of mme_s6a_handle_idr
The problem occurred in the following scenario:
1. VLR sent PAGING-REQUEST to the MME
2. MME sent S1-Paging to the UE
3. Paging failed
4. MME responded SERVICE-REQUEST to the VLR
5. VLR sent DOWNLINK-UNITDATA to the MME
6. Even though there is no S1 Context,
MME try to sent DownlinkNASTransport message to the UE.
7. So, the problem occurred.
I've changed the number 4 PAGING-REJECT instead of SERVICE-REQUEST.
* CLR while idle is broken after 7031856cd7
Cancel Location Request arriving while UE is idle will not proceed to paging due to this check for S1 connection. Using new flag "isAnswer" to bypass this check to allow paging to occur when we are not doing a AIA/ULA related procedure.
* No Context Setup is required when sending the detach request. If the paging was due to wanting to send a Detach Request to the UE, then we fast track to sending the detach request.
* emm-sm.c:
In the case of MME initiated detach while UE is idle, there is no initial conext setup. We go right from the service request after paging into sending the detach request. TS23.401
mme-path.c:
Using nas_eps.type in the case of MME Initiated Detach while UE is idle does not work. nas_eps.type would represent the service request.
mme-s11-handler.c:
After S11 action, no action should be taken. We want to wait for the detach accept from the UE before proceeding with the S1 release (detach).
* InitialContextSetup should occur for detach.
Pau Espin
Sukchan Lee
Oliver Smith
Šimon Lukašík
Emanuele Di Pascale
Shigeru Ishida
Gaber Stare
Bostjan Meglic
jmasterfunk84