Instead of checking if caller memset'ted the structure to zero, memset
it inside the function regardless.
There is no added benefit of a memset() + memcmp() to check if caller
cleared the structure used for outputing data from the database.
As per 3GPP TS 23.401 version 15.12.0, section 5.3.1.2.2
The PDN GW allocates a globally unique /64
IPv6 prefix via Router Advertisement to a given UE.
After the UE has received the Router Advertisement message, it
constructs a full IPv6 address via IPv6 Stateless Address
autoconfiguration in accordance with RFC 4862 using the interface
identifier assigned by PDN GW.
For stateless address autoconfiguration however, the UE can
choose any interface identifier to generate IPv6 addresses, other
than link-local, without involving the network.
And, from section 5.3.1.1, Both EPS network elements and UE shall
support the following mechanisms:
/64 IPv6 prefix allocation via IPv6 Stateless Address
autoconfiguration according to RFC 4862, if IPv6 is
supported.
* Fix conversion from IPFilterRule to packet filter
As per 3GPP TS 24.008, following Packet filter component type identifier
are not supported on the LTE pre release-11 UEs:
IPv4 local address type
IPv6 remote address/prefix length type
IPv6 local address/prefix length type
And,
IPv6 remote address/prefix length type and
IPv6 local address/prefix length type shall be used when both MS and
Network support Local Address in TFTs.
This commit add logic to omit adding local address in packet filters
for compatibility with pre-release LTE 11 devices. The following parameter
could be used to toggle omit/no to omit behavior.
parameter:
no_ipv4v6_local_addr_in_packet_filter: <true/false>
* Remove logic of supporting pre-release LTE 11 devices in PCRF
* Preserve local port in Rx flow-description
In contnuation to support for calling in pre-rel. LTE 11 devices
, rather than removing the local IP addr field and local port remove
only the IP addr field
* tft: Set precedence considering exisiting TFTs in all bearers of a DNN
* AAR Media-Sub-Component modification for more UEs support
* Introduce parameter for legacy support for pre-release LTE 11 devices to do calling
IE (IPV4-local-addr field ) is not supported on
the LTE pre release-11 UEs. In order for the call
to work the local address in packet filter must
be replaced by any.
Parameter: no_ipv4v6_local_addr_in_packet_filter
* Flow-Description use 'to assigned' in Gx Interface
* Support SDF Filter ID
* Support F-TEID's Choose
* BAR(Buffering) is added in PFCP session
* Default Apply Action uses NOCP|BUFF
* Add Vendor-Specific-Application-Id in CER of PCRF
Not advertising a Vendor-Specific-Application-Id in CER may result in
Diameter Peer rejecting the CER with a DIAMETER_NO_COMMON_APPLICATION error
* Add Vendor-Specific-Application-Id in CER of HSS and MME
Not advertising a Vendor-Specific-Application-Id in CER may result in
Diameter Peer rejecting the CER with a DIAMETER_NO_COMMON_APPLICATION error
<DOWNLINK>
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
<UPLINK>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
- Set the number of UEs in units of AMF/MME instead of gNB/eNB.
- See default value as shown below
Number of UEs per AMF/MME : 4,096
Number of gNB/eNB per AMF/MME : 32
The fix introduced in commit 768e4d9eb3 is wrong, which resulting in UE
replying with bad Semantic error for Activate Dedicated EPS Bearer Context Request. Hence, reverting back
to original implementation as its correctly doing the conversion as per 3GPP Spec. ETSI ETSI TS 129 214 V14.3.0
Section 5.3.8.
Pau Espin
Bostjan Meglic
Sukchan Lee
Šimon Lukašík
Supreeth Herle