Expose metrics with labels according to ETSI TS 128 552 V16.13.0 in
UPF by using hash.
The metrics are named respecting the rule:
<generation>_<measurement_object_class>_<measurement_family_name>_<metric_name_as_in_TS_128_552>
5qi is not available in UPF.
To present 5qi to the user, MN will have to maintain a table qfi->5qi
for each QoS flow (will have to get information from SMF).
So UPF has to expose qfi. qfi itself is not useful. When used, UPF will
have to expose additional label to define the session (e.g. source
interface).
Label dnn is set to value of APN/DNN received in Establishment.
Since SMF does not add APN/DNN to Establishment, the label is empty.
When APN/DNN will be set by SMF, it should be added to sess in UPF
and used in metrics on Modification and Deletion.
Both datavolumeqosleveln3upf are exposed in bytes.
MN is providing the transformation to kbits.
fivegs_upffunction_upf_qosflows should expose the number of QFIs used in
sessions, but exposes number of QER rules, which is currently equal to
QFIs.
The label snsssai is not provided since the slice is not available on UPF.
Exposed metrics example:
Standard counters:
fivegs_ep_n3_gtp_indatapktn3upf 28637
fivegs_ep_n3_gtp_outdatapktn3upf 14729
fivegs_upffunction_sm_n4sessionestabreq 4
fivegs_upffunction_sm_n4sessionestabfail{cause="66"} 1
fivegs_upffunction_sm_n4sessionestabfail{cause="71"} 68
fivegs_upffunction_sm_n4sessionestabfail{cause="68"} 4
fivegs_upffunction_sm_n4sessionestabfail{cause="72"} 15
fivegs_upffunction_sm_n4sessionestabfail{cause="75"} 3
fivegs_upffunction_sm_n4sessionestabfail{cause="65"} 4
fivegs_upffunction_sm_n4sessionreport 0
fivegs_upffunction_sm_n4sessionreportsucc 0
fivegs_ep_n3_gtp_indatavolumeqosleveln3upf{qfi="1"} 39792997
fivegs_ep_n3_gtp_outdatavolumeqosleveln3upf{qfi="1"} 737548
Nonstandard gauge (added for controlling purposes -
same metric as existing metric on AMF and SMF):
fivegs_upffunction_upf_sessionnbr 1
Standard gauge:
fivegs_upffunction_upf_qosflows{dnn=""} 1
A problem occurred when there was one SGWU/UPF and multiple SGWC/SMF.
When SGWU and UPF create a session, if the SEID is the same,
the existing session information is used without creating an additional session.
These problems were solved by using the F-SEID including IP information
in the process of checking the existing session.
* Flow-Description use 'to assigned' in Gx Interface
* Support SDF Filter ID
* Support F-TEID's Choose
* BAR(Buffering) is added in PFCP session
* Default Apply Action uses NOCP|BUFF
<DOWNLINK>
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
<UPLINK>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
- Set the number of UEs in units of AMF/MME instead of gNB/eNB.
- See default value as shown below
Number of UEs per AMF/MME : 4,096
Number of gNB/eNB per AMF/MME : 32
gstaa
Sukchan Lee
Gaber Stare
mitmitmitm
Pau Espin
Spencer Sevilla