Scenario is handover on S1AP, data forwarding is enabled, and
the Source ENB is forwarding DL PDCP packets to EPC(SGWU)
with PDCP SN included. SGWU is also forwarding these packets
to the Target ENB.
However the PDCP SN is not present in the forwarded packets
from SGWU to Target ENB.
I modified this part, and there was the same problem in 5GC, fixed it as well.
A lot of code in GTP-U has been modified,
so if you have any problems, please let us know right away.
Expose metrics with labels according to ETSI TS 128 552 V16.13.0 in
UPF by using hash.
The metrics are named respecting the rule:
<generation>_<measurement_object_class>_<measurement_family_name>_<metric_name_as_in_TS_128_552>
5qi is not available in UPF.
To present 5qi to the user, MN will have to maintain a table qfi->5qi
for each QoS flow (will have to get information from SMF).
So UPF has to expose qfi. qfi itself is not useful. When used, UPF will
have to expose additional label to define the session (e.g. source
interface).
Label dnn is set to value of APN/DNN received in Establishment.
Since SMF does not add APN/DNN to Establishment, the label is empty.
When APN/DNN will be set by SMF, it should be added to sess in UPF
and used in metrics on Modification and Deletion.
Both datavolumeqosleveln3upf are exposed in bytes.
MN is providing the transformation to kbits.
fivegs_upffunction_upf_qosflows should expose the number of QFIs used in
sessions, but exposes number of QER rules, which is currently equal to
QFIs.
The label snsssai is not provided since the slice is not available on UPF.
Exposed metrics example:
Standard counters:
fivegs_ep_n3_gtp_indatapktn3upf 28637
fivegs_ep_n3_gtp_outdatapktn3upf 14729
fivegs_upffunction_sm_n4sessionestabreq 4
fivegs_upffunction_sm_n4sessionestabfail{cause="66"} 1
fivegs_upffunction_sm_n4sessionestabfail{cause="71"} 68
fivegs_upffunction_sm_n4sessionestabfail{cause="68"} 4
fivegs_upffunction_sm_n4sessionestabfail{cause="72"} 15
fivegs_upffunction_sm_n4sessionestabfail{cause="75"} 3
fivegs_upffunction_sm_n4sessionestabfail{cause="65"} 4
fivegs_upffunction_sm_n4sessionreport 0
fivegs_upffunction_sm_n4sessionreportsucc 0
fivegs_ep_n3_gtp_indatavolumeqosleveln3upf{qfi="1"} 39792997
fivegs_ep_n3_gtp_outdatavolumeqosleveln3upf{qfi="1"} 737548
Nonstandard gauge (added for controlling purposes -
same metric as existing metric on AMF and SMF):
fivegs_upffunction_upf_sessionnbr 1
Standard gauge:
fivegs_upffunction_upf_qosflows{dnn=""} 1
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
So far, no operation was performed when Error Indication was received
from eNodeB. For that reason, I solved #568 issues by controlling
the MME to prevent this from happening.
Now, when GTP-U Error Indication is received, MME and SGW are implemented
to do what they have to do. I hope that the network can be restored
by responding appropriately even if Error Indication occurs.
<DOWNLINK>
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
<UPLINK>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
- Set the number of UEs in units of AMF/MME instead of gNB/eNB.
- See default value as shown below
Number of UEs per AMF/MME : 4,096
Number of gNB/eNB per AMF/MME : 32
Sukchan Lee
Robert Dash
mitmitmitm
Gaber Stare
Lester
Pau Espin
Josh Bailey
Josh Bailey