* Update 03-VoLTE-dockerized.md
adding "-" in docker-compose commands and added filename t the docker-compose command
* Adding up command to docker-compose
Need to bring docker images up to run the Open5Gs system.
Allow network operators to omit the time zone in the 4G EMM Information
and 5G Configuration Update. This is useful for better compatibility
with some UEs.
The parameter is optional according to:
* 4G: 3GPP TS 24.301 Table 8.2.13.1
* 5G: 3GPP TS 24.501 Table 8.2.19.1.1
Bug:
In case that AMF does not have subscription data for the UE,
PDU session remains unreleased after implicit de-registeration.
The exact test case:
- UE registered (integrity protection applied)
- UE deregistered (Nudm_SDM_Unsubscribe, Nudm_UECM_Registration (purgeFlag))
- UE registered, PDU session activated
UE data are still stored in AMF. So if integrity protected applies,
the steps 4 - 14 [ETSI TS 123 502 V16.7.0](https://www.etsi.org/deliver/etsi_ts/123500_123599/123502/16.07.00_60/ts_123502v160700p.pdf) are skipped.
Only AM Policy Association Establishment is performed.
- UE is moved out of radio coverage, 2 x (4 min + Timer t3512) expires
Result: UE is implicitly de-registered, PDU session is not released
The steps of implicit de-registeration:
1. Implicit Timer Expiration
2. UDM_SDM_Unsubscribe
3. UDM_UECM_Deregistration
4. PDU session release request
5. PDUSessionResourceReleaseCommand + PDU session release command
6. PDUSessionResourceReleaseResponse
7. AM_Policy_Association_Termination
So PDU session release is performed after the confirmation of
UDM_UECM_Deregistration.
Since there is no UDM_SDM subscription, the UDM steps are skipped
and PDU session is not released.
Fix:
If the AMF does not have subscription data for the UE which registers,
the AMF registers with the UDM using Nudm_UECM_Registration and
retrieves subscription data with Nudm_SDM_Get.
[ETSI TS 123 502 V16.7.0](https://www.etsi.org/deliver/etsi_ts/123500_123599/123502/16.07.00_60/ts_123502v160700p.pdf), 4.2.2.2.2 General Registration, 14a-c:
> If the AMF does not have subscription data for the UE, the AMF retrieves the Access and Mobility Subscription data, SMF
> Selection Subscription data, UE context in SMF data and LCS mobile origination using Nudm_SDM_Get.
1. UE sends RegistrationRequest to AMF.
2. AMF sends Nudm_UECM_Registration to UDM.
3. UE sends RegistrationRequest to AMF.
4. GMM state is gmm_state_authentication
5. UDM sends Nudm_UECM_Registration response to AMF.
6. AMF crashs since no Handler in gmm_state_authentication state
According to 3GPP TS 29.510, the search parameter "tai" should be a
single item, not an array of items.
TS 29.510: Table 6.2.3.2.3.1-1:
URI query parameters supported by the GET method on this resource
Revert "[SBI] Change discovery option TAI from array to single item"
This reverts commit b4beff1ae16c64b3c6d84d8bdb47c36e19b705f2.
wip
This problem can be occurred in the following scenarios.
1. Run NFs(NRF/SCP/SMF/UPF/AUSF/UDM/PCF/BSF/NSSF/UDR) except AMF.
2. Run AMF
3. Run gNB/UE and try to register
4. STOP PCF
5. AMF Crashed
AMF discovered the PCF through SCP during the UE registration process.
At this time, ogs_sbi_nf_fsm_init() is not called,
so AMF does not have state information about PCF.
In other words, AMF state is NULL.
In such a situation, when PCF is terminated at this time,
a crash occurs as AMF attempts to change the PCF state.
So, I've fixed that state information is initialized to solve this problem.
This commit splits filling Requested-Service-Unit, Used-Service-Unit and
QoS-Information into their own helper functions for better readibility,
and then partially reverts 125740727e,
where lots of AVPs were left out of INITIAL_REQUEST messagesi during the
changes made.
After looking through 3GPP TS 32.299 and rfc4006, it seems expected to
send Requested-Service-Unit only during INITIAL_REQUEST, and
Used-Service-Unit during UPDATE_REQUEST, so that part is kept.
However, I am not able to find clear indications that AVPs such as QoS
Information and RAT-Type should not be sent during INITIAL_REQUEST.
So, since we have the info, better set it already during
INITIAL_REQUEST, since the OCS may want to grant different resources
based on that information if available too.
* [AUSF] Fix removing UE context on authentication removal request
AUSF crashed when trying to access ausf_ue->sm fields after they were
already deleted.
* [AMF] Delete UE authentication result after UE deregisters from 5G core
Based on TS 29.509 - 5.2.2.2.5 Authentication Result Removal with 5G AKA
method:
In the case that the Purge of subscriber data in AMF after the UE
deregisters from the network or the NAS SMC fails following the
successful authentication in the registration procedure, the NF Service
Consumer (AMF) requests the AUSF to inform the UDM to remove the
authentication result.
* [SBI] Ignore unknown enum values and continue parsing (#2622)
* [SBI] Reject empty enum lists (#2622)
Enum lists that are empty due to ignoring
unsupported enum values are also rejected.
* Revert changing `generator.sh`
amf_ue->mac_failed flag to be cleared during security mode procedure but it was not.
At this point, the only way to cleare the amf_ue->mac_failed flag is by UE Context Release.
But I'd like to connect UEs as fast as possible without UE Context Release.
* Add "subscriber_status" cmd to open5gs-dbctl to set values for
"subscriber_status" and "operator_determined_barring" DB fields.
* Add webui View+Edit for those same fields.
* open5gs-hssd now takes those values into account and submits
Operator-Determined-Barring AVP with DB-retrieved value if
subscriber_status is set to OPERATOR_DETERMINED_BARRING.
For more information, see TS 29.272 section 5.2.2.1.3 and 7.3.30.
Tests were crashing due to AF using the wrong OpenAPI structure, while
the SBI library tried to convert a different structure to JSON.
Before the added support for nullable fields in OpenAPI documents, both
structures were identical.
Depending on the OpenAPI yaml files, fields can be marked as "nullable".
Which means that the field can be either present, not present, or null.
This feature is important for example in SmContextUpdateData structure,
where many fields are described similar as the following:
This IE shall be included for the modification .... For deleting the
field, it shall contain the Null value.
currently if no IP address is available from the configured
subnets in the SMF when attempting to assign an IP to an UE
we assert and the SMF crashes. Handle the error more gracefully
by returning an error cause instead.
Open5GS documentation instructs to install into open5gs.git/install/
during build [1]:
"""
$ cd open5gs
$ meson build --prefix=`pwd`/install
$ ninja -C build
"""
As a result, this directory appears all the time when using git, since
it's not in the .gitignore file. Add it.
[1] https://open5gs.org/open5gs/docs/guide/02-building-open5gs-from-sources/
Oliver Smith
Sukchan Lee
joereith
gstaa
Bostjan Meglic
Pau Espin
Šimon Lukašík
Brias
Bostjan Meglic
Emanuele Di Pascale