Catch Origin-Host during CCA and set it as Destination-Host during
subsequent CCRs. This way we ensure UPDATE/TERMINATION Requests are sent
back explicitly to the same Diameter peer. Moreover, it seems
freediameter relies on this AVP to properly send the message over the
correct SCTP association when several diameter peers are available.
1. UE registered and PDU established.
2. PCF does not receive Heartbeat.
- PCF De-registered state.
- Since PDU is established, SMF should not remove NF instance
3. PCF re-registered.
- HERE, WE NEED TO INCREASE NF REFERENCE COUNT.
Otherwise, NF instance will be removed if PCF is de-registered state
4. UE sends PDU release request.
5. Because SMF knows PCF NF instance, SMF can send PCF delete
As per 3GPP TS 23.401 version 15.12.0, section 5.3.1.2.2
The PDN GW allocates a globally unique /64
IPv6 prefix via Router Advertisement to a given UE.
After the UE has received the Router Advertisement message, it
constructs a full IPv6 address via IPv6 Stateless Address
autoconfiguration in accordance with RFC 4862 using the interface
identifier assigned by PDN GW.
For stateless address autoconfiguration however, the UE can
choose any interface identifier to generate IPv6 addresses, other
than link-local, without involving the network.
And, from section 5.3.1.1, Both EPS network elements and UE shall
support the following mechanisms:
/64 IPv6 prefix allocation via IPv6 Stateless Address
autoconfiguration according to RFC 4862, if IPv6 is
supported.
* [SMF] Gn: Avoid assert crash if no PDP resources available
* [SMF] Gn: Rearrange IE handling order in CreatePDPContextRequest
Let's handle the GTPC remote addr + TEID first, since those should be
used in the CreatePDPContextResponse ideally if available.
Let's then handle parsing of all IEs not related to bearers/UserPlane,
then those missing, and finally do all the IP resource allocation.
* Fix conversion from IPFilterRule to packet filter
As per 3GPP TS 24.008, following Packet filter component type identifier
are not supported on the LTE pre release-11 UEs:
IPv4 local address type
IPv6 remote address/prefix length type
IPv6 local address/prefix length type
And,
IPv6 remote address/prefix length type and
IPv6 local address/prefix length type shall be used when both MS and
Network support Local Address in TFTs.
This commit add logic to omit adding local address in packet filters
for compatibility with pre-release LTE 11 devices. The following parameter
could be used to toggle omit/no to omit behavior.
parameter:
no_ipv4v6_local_addr_in_packet_filter: <true/false>
* Remove logic of supporting pre-release LTE 11 devices in PCRF
* [SMF] typo fixes in commented code
* [SMF] Fix early err return handling UpdatePDPContextRequest
* [SMF] UpdatePDPContext: forward update of remote TEID+IPaddr to UPF
Updating the remote GTP-U IP address and/or TEID on the GGSN is a common
practice, used for instance by an SGSN in a UTRAN network to connect an
HNB(GW) to exchange GTP-U directly with the GGSN. It is also used in
general when doing handovers.
When receiving a UpdatePDPContext with the new address, we need to
forward the update to the UPF so that it takes it into account when
forwarding packets.
This patch only implements updating the information towards the UPF when
GTPv1C is used. Similar approach for GTPv2C (upon receival of Modify
Bearer Request) is still unimplemented.
Related: https://github.com/open5gs/open5gs/issues/1367
In the event we have 2 local IP addresses available for use, put the one
having same IP version in "GGSN Address *" IE, and the one with the
other IP version in "Alternative GGSN Address *" IE.
Same fix was applied recently to CreatePDPContextResponse.
TS 29.060 sections 7.3.4 and 7.3.6 specify the possible cause values for
UpdatePdpContextResponse and DeletePdpContextResponse.
Together with section 8.2, it becomes clear that 'Non-existent' cause
should be sent instead of 'Context not found' one in those cases.
It seems to be actually mandatory in GGSN->SGN directon, though it is
ignored in Release99 upwards. Let's hardcode it to 0 for now, should be
fine in the majority of cases.
In the event we have 2 local IP addresses available for use, put the one
having same IP version in "GGSN Address *" IE, and the one with the
other IP version in "Alternative GGSN Address *" IE.
* [CORE] tlv: Store mode in ogs_tlv_t
This allows specifying the format of the IE for each individual IE,
hence allowing messages containing IEs formatted in different ways.
This is needed in order to support parsing GTPv1-C, since messages
contain IEs with different structure (TLV vs TV). Hence, this is a
preparation patch to add support for parsing TVs in ogs-tlv.c/.h.
* [CORE] tlv: Support parsing msg with both TLV and TV in it
IEs of type TV are sometimes used in GTPv1-C. Current tlv parser/builder
doesn't provide with ways to parse messages which contain TV formatted
IEs. This patch adds the relevant types and ways to encode/decode them.
Furthermore, the current parser/builder allows parsing/building messages
containing the exact same format in all its IEs. A new parser function
is added which allows parsing messages of different types (TV, TLV)
mixed in the same message. In order to be able to do so, it uses the
general msg_mode passed to it in order to know the general TLV format
(in essence, the length of the Tag field, and also the length of the
Length field if applicable each IE).
Looking up the instance in the TLV description is left undone and
hadcoded to 0, since the only user so far requiring this API is GTPv1-C,
which has no instances.
* [CORE] tlv: Support repeated tag+instance parsing TLV message
In GTPv2C, repeated IEs (same tag) are easily differentiated by the
Instance byte, which provides info to match different decoded
structures. In GTPv1C though, there's no Instance byte, and we still
encounter repeated IEs (like GSN Address in Create PDP Context Request).
Hence, the TLV decoder needs to be updated to track count of IEs found
(identified by tag+instance, where instance is always 0 in GTPv1C) and
get the proper description index + offset into the decoded structure.
* [GTP]: Move GTPv2-C specifics to its own libgtp subdir
This will allow adding GTPv1-C code by the side. Most GTPv2 code is left
in this patch as "gtp" instead of renaming it to "gtp2" in order to
avoid massive changes. It can be done at a later stage if wanted.
* [GTP] Support generating GTPv1-C messages
* [SMF] Add Gn interface support
This patch introduces GTPv1C support to open5gs-smfd. With it,
open5gs-becomes a GGSN too, where SGSN can connect to, hence supporting
GERAN and UTRAN networks.
* [SMF] Fix potential null pointer dereference
Pointer "sess" was first dereferenced and later on checked for nullness.
This is clearly wrong. Rearrange the code path to make sure the check is
done first, then dereferenced.
* gitignore: Add subprojects/libtins
* cosmetic: Fix whitespace
As per RFC 4861 Router advertisement message
format, Source Address MUST be the link-local address
assigned to the interface from which this message is sent.
Since SMF was not sending it as per RFC, certain
phones were not completing the procedure of stateless
IPv6 address autoconfiguration mentioned in
3GPP TS 23.401 version 15.12.0 Release 15, section 5.3.1.2.2
During PDU Session Establishment,
if gNB sends PDUSessionResourceReleaseResponse,
AMF was crashed.
In this case, AMF/SMF remove Session Context and sends ErrorIndication.
When connecting to the UPF port for the PFCP protocol (8805) and sending
an association setup request followed by a session establishment request
with a PDI Network Instance set to ‘internet’, it causes a stack corruption
to occur.
So, ogs_fqdn_parse() fixed.
commit 183d8b8344122f25f77be79b1b698c71f48c1656
Author: Sukchan Lee <acetcom@gmail.com>
Date: Fri May 28 23:44:26 2021 +0900
[SMF] introduce new list API [#1019]
Sometimes we may need two lists for same node.
To do this, I created a new list API, and applied it this pull request.
This commit address the issue where a bearer with particular
PCC rule name exists with TFTs and addtional TFTs needs to be added
to same bearer and DRB lost is reported by UE.
This is achieved by creating EPS Bearer Level Traffic Flow Template
with TFT operation code as 'OGS_GTP_TFT_CODE_ADD_PACKET_FILTERS_TO_EXISTING_TFT' in
above scenario rather than use 'OGS_GTP_TFT_CODE_CREATE_NEW_TFT' at all times.
And, not remove existing packet filters for the bearer.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
* Preserve local port in Rx flow-description
In contnuation to support for calling in pre-rel. LTE 11 devices
, rather than removing the local IP addr field and local port remove
only the IP addr field
* tft: Set precedence considering exisiting TFTs in all bearers of a DNN
The configuration has changed. PFCP node rr=0 is removed as shown below.
sgwc:
pfcp
rr: 0 <-- Removed
Introduced a new configuration method for SMF/SGW-C
parameter:
no_pfcp_rr_select: true
By default, PFCP round robin selection is allowed.
The above parameters prohibit selecting PFCP in a round robin manner.
DataForwardingNotPossible should only be included
if Data Path is not available during N2-Handover.
However, there is a bug that always includes
DataFowardingNotPossible regardless of Handover.
So, I've fixed it!
Sukchan Lee
Pau Espin
Supreeth Herle
Balint Cristian