* [SBI] Handle and store AMF info
* [SBI] Add "target GUAMI" discovery option
* [SBI] Handle UeContextTransfer request and response messages
* [AMF] Handle NF discovery from AMF to AMF
* [AMF] Add UE Context Transfer Request/Response from AMF to AMF
* [SCP] Handle UeContextTransfer
* Follow-up on #3052
* [AMF] force authentication after 'Ue context transfer' for now
* [AMF] force authentication after 'Ue context transfer' for now
---------
Co-authored-by: Sukchan Lee <acetcom@gmail.com>
1. HandoverRequired
2. HandoverRequest
3. HandoverFailure
4. UEContextReleaseCommand
5. HandoverPreparationFailure
If UEContextReleaseComplete is not received,
the Source-UE will have the Target-UE.
6. HandoverRequired
There may be cases where the Source UE has a Target UE
from a previous HandoverRequired process. In this case,
it is recommended to force the deletion of the Target UE information
when receiving a new HandoverRequired.
7. HandoverRequest
8. HandoverFailure
9. UEContextReleaseCommand
10. UEContextReleaseComplete
11. HandoverPreparationFailure
... Crashed ...
There is an issue with SESSION RELEASE not working properly
depending on the PDU session release complete order
in the PDUSessionResourceReleaseResponse.
If the AMF receives PDUSessionResourceReleaseResponse
followed by PDU session release complete, it works correctly.
However, if it receives PDU session release complete
followed by PDUSessionResourceReleaseResponse, it does not work correctly
and sends an Error Indication to the UE/gNB.
To fix this issue, we added pdu_session_release_complete_received and
pdu_session_resource_release_response_received to the content
so that CLEAR_SM_CONTEXT_REF() is executed when both are received.
While they were continuing their fuzzy testing and developing PacketRusher, an unusual issue with the AMF was observed. The problem arises when a single Ethernet frame containing three bundled SCTP chunks is sent. This behavior is reproduced with PacketRusher when attempting to concurrently register two UEs with the same MSIN.
The expected behavior is that the PDU Session Establishment Accept is sent inside a DownlinkNASTransport to RAN UE NGAP ID 1. However, it is actually sent inside an InitialContextSetupRequest to RAN UE NGAP ID 2. The MAC of this NAS message is invalid for the Security Context of RAN UE NGAP ID 2 (probably valid for RAN UE NGAP ID 1)
I've resolved an issue where sending continuous
'PDU Session Release Request' message to the same session,
when more than two sessions were created, was causing an SMF crash.
For your reference, this problem did not occur
when only one session was created.
* [AMF/MME] UEContextReleaseCommand in Integrity (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
* [AMF/MME] UEContextReleaseCommand after Interity Protected (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
- have a more consistent naming among the NF's
- always have the same prefix (amf_/smf_/pcf_) depending on the NF
- function name is always the same, how the function calculates the load
is NF specific and internal to the function itself (but not the function
name).
<nf>/init.c:<nf>_main() :
ogs_pollset_poll() receives the time of the expiration of next timer as
an argument. If this timeout is in very near future (1 millisecond),
and if there are multiple events that need to be processed by
ogs_pollset_poll(), these could take more than 1 millisecond for
processing, resulting in the timer already passed the expiration.
In case that another NF is under heavy load and responds to an SBI
request with some delay of a few seconds, it can happen that
ogs_pollset_poll() adds SBI responses to the event list for further
processing, then ogs_timer_mgr_expire() is called which will add an
additional event for timer expiration. When all events are processed
one-by-one, the SBI xact would get deleted twice in a row, resulting in
a crash.
0 __GI_abort () at ./stdlib/abort.c:107
1 0x00007f9de91693b1 in ?? () from /lib/x86_64-linux-gnu/libtalloc.so.2
2 0x00007f9de9a21745 in ogs_talloc_free (ptr=0x7f9d906c2c70, location=0x7f9de960bf41 "../lib/sbi/message.c:2423") at ../lib/core/ogs-memory.c:107
3 0x00007f9de95dbf31 in ogs_sbi_discovery_option_free (discovery_option=0x7f9d9090e670) at ../lib/sbi/message.c:2423
4 0x00007f9de95f7c47 in ogs_sbi_xact_remove (xact=0x7f9db630b630) at ../lib/sbi/context.c:1702
5 0x000055a482784846 in amf_state_operational (s=0x7f9d9488bbb0, e=0x7f9d90aecf20) at ../src/amf/amf-sm.c:604
6 0x00007f9de9a33cf0 in ogs_fsm_dispatch (fsm=0x7f9d9488bbb0, event=0x7f9d90aecf20) at ../lib/core/ogs-fsm.c:127
7 0x000055a48275b32e in amf_main (data=0x0) at ../src/amf/init.c:149
8 0x00007f9de9a249eb in thread_worker (arg=0x55a483d41d90) at ../lib/core/ogs-thread.c:67
9 0x00007f9de8fd2b43 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
10 0x00007f9de9063bb4 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:100
[AMF] Implicit Network-initiated Deregistration
Two timers are introduced (both with duration of T3512 + 4 min):
-MOBILE_REACHABLE
-IMPLICIT_DEREGISTRATION
MOBILE_REACHABLE is set when NAS connection for the UE is released.
IMPLICIT_DEREGISTRATION is set when MOBILE_REACHABLE expires.
On MOBILE_REACHABLE expiry Paging is ignored.
On IMPLICIT_DEREGISTRATION expiry:
-UE's RM_State is set to DEREGISTERED
-UE is Nudm_SDM_Unsubscribed
-UE is Nudm_UECM_Deregistered
-PDU sessions are released
-AM policies are deleted
Existing flag amf_ue->network_initiated_de_reg is used.
The current load percentage of the NF Service Consumer is provided
in the payload body of the PATCH request when periodically
contacting the NRF (heart-beat).
AMF: ratio between currently connected ran_ue and maximum number of them
SMF: ratio between current PDU sessions and maximum available
PCF: ratio between current AM+SM policy associations and maximum available
or ratio between currently connected UEs and maximum number of them
(the load which is higher)
AUSF, UDM: ratio between currently connected UE and maximum number of them
BSF: ratio between current sessions and maximum available
NSSF: ratio between currently used NSIs and maximum number of them
NRF currently doesn't determine that the NF Profile has changed.
AMF does not crash anymore when a new UE registration request arrives,
and there is no available space left in UE context pool. Now it just
rejects the request with an error.
AMF subscribes to UDM for each registered UE.
At the moment, UDM does not send callback to AMF when any of the UE's
properties in the database changes.
At the moment, AMF does properly parse the ModificationNotification, but
does not do anything useful.
UDM may send a Deregistration Notification to AMF, to deregister
specific UE from the network - Network-Initiated Deregistration.
Deregistration procedure includes sending Deregistration Request to UE,
starting a timer T3522, releasing PDU sessions from SMF, releasing PCF
policies from PCF, and waiting for Deregistration Accept from UE.
Not yet implemented is:
- to prevent deregistration of UE in case it has any emergency sessions,
- page UE when UE is in IDLE mode.
TS24.501
8.2.11 DL NAS transport
8.2.11.4 5GMM cause
The AMF shall include this IE when the Payload container IE
contains an uplink payload which was not forwarded and
the Payload container type IE is not set to "Multiple payloads".
-0-
As such, this function 'nas_5gs_send_gsm_reject()' must be used
only when an N1 SM message has been forwarded to the SMF.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
Most of the time, an application wants to perform some amount of data buffering
in addition to just responding to events. When we want to write data,
for example, the usual pattern runs something like:
1. Decide that we want to write some data to a connection;
put that data in a buffer.
2. Wait for the connection to become writable
3. Write as much of the data as we can
4. Remember how much we wrote, and if we still have more data to write,
wait for the connection to become writable again.
Now, Open5GS implements the above method by default when transmitting data
in a stream type socket.
Matej Gradišar
Sukchan Lee
Bostjan Meglic
Gaber Stare
Kenny Barlee