* Preserve local port in Rx flow-description
In contnuation to support for calling in pre-rel. LTE 11 devices
, rather than removing the local IP addr field and local port remove
only the IP addr field
* tft: Set precedence considering exisiting TFTs in all bearers of a DNN
* AAR Media-Sub-Component modification for more UEs support
* Introduce parameter for legacy support for pre-release LTE 11 devices to do calling
IE (IPV4-local-addr field ) is not supported on
the LTE pre release-11 UEs. In order for the call
to work the local address in packet filter must
be replaced by any.
Parameter: no_ipv4v6_local_addr_in_packet_filter
* Flow-Description use 'to assigned' in Gx Interface
* Support SDF Filter ID
* Support F-TEID's Choose
* BAR(Buffering) is added in PFCP session
* Default Apply Action uses NOCP|BUFF
* Add Vendor-Specific-Application-Id in CER of PCRF
Not advertising a Vendor-Specific-Application-Id in CER may result in
Diameter Peer rejecting the CER with a DIAMETER_NO_COMMON_APPLICATION error
* Add Vendor-Specific-Application-Id in CER of HSS and MME
Not advertising a Vendor-Specific-Application-Id in CER may result in
Diameter Peer rejecting the CER with a DIAMETER_NO_COMMON_APPLICATION error
<DOWNLINK>
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
<UPLINK>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
- Set the number of UEs in units of AMF/MME instead of gNB/eNB.
- See default value as shown below
Number of UEs per AMF/MME : 4,096
Number of gNB/eNB per AMF/MME : 32
The fix introduced in commit 768e4d9eb3 is wrong, which resulting in UE
replying with bad Semantic error for Activate Dedicated EPS Bearer Context Request. Hence, reverting back
to original implementation as its correctly doing the conversion as per 3GPP Spec. ETSI ETSI TS 129 214 V14.3.0
Section 5.3.8.