1. UE registered and PDU established.
2. PCF does not receive Heartbeat.
- PCF De-registered state.
- Since PDU is established, SMF should not remove NF instance
3. PCF re-registered.
- HERE, WE NEED TO INCREASE NF REFERENCE COUNT.
Otherwise, NF instance will be removed if PCF is de-registered state
4. UE sends PDU release request.
5. Because SMF knows PCF NF instance, SMF can send PCF delete
As per 3GPP TS 23.401 version 15.12.0, section 5.3.1.2.2
The PDN GW allocates a globally unique /64
IPv6 prefix via Router Advertisement to a given UE.
After the UE has received the Router Advertisement message, it
constructs a full IPv6 address via IPv6 Stateless Address
autoconfiguration in accordance with RFC 4862 using the interface
identifier assigned by PDN GW.
For stateless address autoconfiguration however, the UE can
choose any interface identifier to generate IPv6 addresses, other
than link-local, without involving the network.
And, from section 5.3.1.1, Both EPS network elements and UE shall
support the following mechanisms:
/64 IPv6 prefix allocation via IPv6 Stateless Address
autoconfiguration according to RFC 4862, if IPv6 is
supported.
* [SMF] Gn: Avoid assert crash if no PDP resources available
* [SMF] Gn: Rearrange IE handling order in CreatePDPContextRequest
Let's handle the GTPC remote addr + TEID first, since those should be
used in the CreatePDPContextResponse ideally if available.
Let's then handle parsing of all IEs not related to bearers/UserPlane,
then those missing, and finally do all the IP resource allocation.
* Fix conversion from IPFilterRule to packet filter
As per 3GPP TS 24.008, following Packet filter component type identifier
are not supported on the LTE pre release-11 UEs:
IPv4 local address type
IPv6 remote address/prefix length type
IPv6 local address/prefix length type
And,
IPv6 remote address/prefix length type and
IPv6 local address/prefix length type shall be used when both MS and
Network support Local Address in TFTs.
This commit add logic to omit adding local address in packet filters
for compatibility with pre-release LTE 11 devices. The following parameter
could be used to toggle omit/no to omit behavior.
parameter:
no_ipv4v6_local_addr_in_packet_filter: <true/false>
* Remove logic of supporting pre-release LTE 11 devices in PCRF
* [SMF] typo fixes in commented code
* [SMF] Fix early err return handling UpdatePDPContextRequest
* [SMF] UpdatePDPContext: forward update of remote TEID+IPaddr to UPF
Updating the remote GTP-U IP address and/or TEID on the GGSN is a common
practice, used for instance by an SGSN in a UTRAN network to connect an
HNB(GW) to exchange GTP-U directly with the GGSN. It is also used in
general when doing handovers.
When receiving a UpdatePDPContext with the new address, we need to
forward the update to the UPF so that it takes it into account when
forwarding packets.
This patch only implements updating the information towards the UPF when
GTPv1C is used. Similar approach for GTPv2C (upon receival of Modify
Bearer Request) is still unimplemented.
Related: https://github.com/open5gs/open5gs/issues/1367
In the event we have 2 local IP addresses available for use, put the one
having same IP version in "GGSN Address *" IE, and the one with the
other IP version in "Alternative GGSN Address *" IE.
Same fix was applied recently to CreatePDPContextResponse.
TS 29.060 sections 7.3.4 and 7.3.6 specify the possible cause values for
UpdatePdpContextResponse and DeletePdpContextResponse.
Together with section 8.2, it becomes clear that 'Non-existent' cause
should be sent instead of 'Context not found' one in those cases.
It seems to be actually mandatory in GGSN->SGN directon, though it is
ignored in Release99 upwards. Let's hardcode it to 0 for now, should be
fine in the majority of cases.
In the event we have 2 local IP addresses available for use, put the one
having same IP version in "GGSN Address *" IE, and the one with the
other IP version in "Alternative GGSN Address *" IE.
* [CORE] tlv: Store mode in ogs_tlv_t
This allows specifying the format of the IE for each individual IE,
hence allowing messages containing IEs formatted in different ways.
This is needed in order to support parsing GTPv1-C, since messages
contain IEs with different structure (TLV vs TV). Hence, this is a
preparation patch to add support for parsing TVs in ogs-tlv.c/.h.
* [CORE] tlv: Support parsing msg with both TLV and TV in it
IEs of type TV are sometimes used in GTPv1-C. Current tlv parser/builder
doesn't provide with ways to parse messages which contain TV formatted
IEs. This patch adds the relevant types and ways to encode/decode them.
Furthermore, the current parser/builder allows parsing/building messages
containing the exact same format in all its IEs. A new parser function
is added which allows parsing messages of different types (TV, TLV)
mixed in the same message. In order to be able to do so, it uses the
general msg_mode passed to it in order to know the general TLV format
(in essence, the length of the Tag field, and also the length of the
Length field if applicable each IE).
Looking up the instance in the TLV description is left undone and
hadcoded to 0, since the only user so far requiring this API is GTPv1-C,
which has no instances.
* [CORE] tlv: Support repeated tag+instance parsing TLV message
In GTPv2C, repeated IEs (same tag) are easily differentiated by the
Instance byte, which provides info to match different decoded
structures. In GTPv1C though, there's no Instance byte, and we still
encounter repeated IEs (like GSN Address in Create PDP Context Request).
Hence, the TLV decoder needs to be updated to track count of IEs found
(identified by tag+instance, where instance is always 0 in GTPv1C) and
get the proper description index + offset into the decoded structure.
* [GTP]: Move GTPv2-C specifics to its own libgtp subdir
This will allow adding GTPv1-C code by the side. Most GTPv2 code is left
in this patch as "gtp" instead of renaming it to "gtp2" in order to
avoid massive changes. It can be done at a later stage if wanted.
* [GTP] Support generating GTPv1-C messages
* [SMF] Add Gn interface support
This patch introduces GTPv1C support to open5gs-smfd. With it,
open5gs-becomes a GGSN too, where SGSN can connect to, hence supporting
GERAN and UTRAN networks.
* [SMF] Fix potential null pointer dereference
Pointer "sess" was first dereferenced and later on checked for nullness.
This is clearly wrong. Rearrange the code path to make sure the check is
done first, then dereferenced.
* gitignore: Add subprojects/libtins
* cosmetic: Fix whitespace
The network access mode of HSS has been changed to 0 (Packet and Circuit).
Versions of MME prior to v2.4.2 did not use this value. Open5GS set
the attach result of Attach Complete message as it is by looking
at the attach type of the Attach Request message.
Now, if the network access mode of HSS is set to 2 (Only Packet),
this value is affected by MME from v2.4.3. Regardless of the attach type
of the Attach Request, the MME will set EPS Only to the attach result
of Attach Complete.
3GPP TS 24.501 version 16.6.0 Release 16
4.4 NAS security
4.4.6 Protection of initial NAS signalling messages
1) the UE needs to send non-cleartext IEs in a REGISTRATION REQUEST
or SERVICE REQUEST message, the UE includes the entire REGISTRATION
REQUEST or SERVICE REQUEST message (i.e. containing both cleartext IEs
and non-cleartext IEs) in the NAS message container IE and shall cipher
the value part of the NAS message container IE. The UE shall then send
a REGISTRATION REQUEST or SERVICE REQUEST message containing
the cleartext IEs and the NAS message container IE;
Sukchan Lee
Pau Espin
Supreeth Herle
EugeneBogush