Allow network operators to omit the time zone in the 4G EMM Information
and 5G Configuration Update. This is useful for better compatibility
with some UEs.
The parameter is optional according to:
* 4G: 3GPP TS 24.301 Table 8.2.13.1
* 5G: 3GPP TS 24.501 Table 8.2.19.1.1
Bug:
In case that AMF does not have subscription data for the UE,
PDU session remains unreleased after implicit de-registeration.
The exact test case:
- UE registered (integrity protection applied)
- UE deregistered (Nudm_SDM_Unsubscribe, Nudm_UECM_Registration (purgeFlag))
- UE registered, PDU session activated
UE data are still stored in AMF. So if integrity protected applies,
the steps 4 - 14 [ETSI TS 123 502 V16.7.0](https://www.etsi.org/deliver/etsi_ts/123500_123599/123502/16.07.00_60/ts_123502v160700p.pdf) are skipped.
Only AM Policy Association Establishment is performed.
- UE is moved out of radio coverage, 2 x (4 min + Timer t3512) expires
Result: UE is implicitly de-registered, PDU session is not released
The steps of implicit de-registeration:
1. Implicit Timer Expiration
2. UDM_SDM_Unsubscribe
3. UDM_UECM_Deregistration
4. PDU session release request
5. PDUSessionResourceReleaseCommand + PDU session release command
6. PDUSessionResourceReleaseResponse
7. AM_Policy_Association_Termination
So PDU session release is performed after the confirmation of
UDM_UECM_Deregistration.
Since there is no UDM_SDM subscription, the UDM steps are skipped
and PDU session is not released.
Fix:
If the AMF does not have subscription data for the UE which registers,
the AMF registers with the UDM using Nudm_UECM_Registration and
retrieves subscription data with Nudm_SDM_Get.
[ETSI TS 123 502 V16.7.0](https://www.etsi.org/deliver/etsi_ts/123500_123599/123502/16.07.00_60/ts_123502v160700p.pdf), 4.2.2.2.2 General Registration, 14a-c:
> If the AMF does not have subscription data for the UE, the AMF retrieves the Access and Mobility Subscription data, SMF
> Selection Subscription data, UE context in SMF data and LCS mobile origination using Nudm_SDM_Get.
1. UE sends RegistrationRequest to AMF.
2. AMF sends Nudm_UECM_Registration to UDM.
3. UE sends RegistrationRequest to AMF.
4. GMM state is gmm_state_authentication
5. UDM sends Nudm_UECM_Registration response to AMF.
6. AMF crashs since no Handler in gmm_state_authentication state
According to 3GPP TS 29.510, the search parameter "tai" should be a
single item, not an array of items.
TS 29.510: Table 6.2.3.2.3.1-1:
URI query parameters supported by the GET method on this resource
Revert "[SBI] Change discovery option TAI from array to single item"
This reverts commit b4beff1ae16c64b3c6d84d8bdb47c36e19b705f2.
wip
This commit splits filling Requested-Service-Unit, Used-Service-Unit and
QoS-Information into their own helper functions for better readibility,
and then partially reverts 125740727e,
where lots of AVPs were left out of INITIAL_REQUEST messagesi during the
changes made.
After looking through 3GPP TS 32.299 and rfc4006, it seems expected to
send Requested-Service-Unit only during INITIAL_REQUEST, and
Used-Service-Unit during UPDATE_REQUEST, so that part is kept.
However, I am not able to find clear indications that AVPs such as QoS
Information and RAT-Type should not be sent during INITIAL_REQUEST.
So, since we have the info, better set it already during
INITIAL_REQUEST, since the OCS may want to grant different resources
based on that information if available too.
* [AUSF] Fix removing UE context on authentication removal request
AUSF crashed when trying to access ausf_ue->sm fields after they were
already deleted.
* [AMF] Delete UE authentication result after UE deregisters from 5G core
Based on TS 29.509 - 5.2.2.2.5 Authentication Result Removal with 5G AKA
method:
In the case that the Purge of subscriber data in AMF after the UE
deregisters from the network or the NAS SMC fails following the
successful authentication in the registration procedure, the NF Service
Consumer (AMF) requests the AUSF to inform the UDM to remove the
authentication result.
amf_ue->mac_failed flag to be cleared during security mode procedure but it was not.
At this point, the only way to cleare the amf_ue->mac_failed flag is by UE Context Release.
But I'd like to connect UEs as fast as possible without UE Context Release.
* Add "subscriber_status" cmd to open5gs-dbctl to set values for
"subscriber_status" and "operator_determined_barring" DB fields.
* Add webui View+Edit for those same fields.
* open5gs-hssd now takes those values into account and submits
Operator-Determined-Barring AVP with DB-retrieved value if
subscriber_status is set to OPERATOR_DETERMINED_BARRING.
For more information, see TS 29.272 section 5.2.2.1.3 and 7.3.30.
currently if no IP address is available from the configured
subnets in the SMF when attempting to assign an IP to an UE
we assert and the SMF crashes. Handle the error more gracefully
by returning an error cause instead.
Scenario is handover on S1AP, data forwarding is enabled, and
the Source ENB is forwarding DL PDCP packets to EPC(SGWU)
with PDCP SN included. SGWU is also forwarding these packets
to the Target ENB.
However the PDCP SN is not present in the forwarded packets
from SGWU to Target ENB.
I modified this part, and there was the same problem in 5GC, fixed it as well.
A lot of code in GTP-U has been modified,
so if you have any problems, please let us know right away.
curl --noproxy '*' --http2-prior-knowledge -X POST --header "Content-Type: multipart/related" --data-binary @pdu http:/192.168.29.231:7777/nsmf-pdusession/v1/sm-contexts
Attaching file 'pdu'
SMF crashes as not able to decode the message properly. SmContextCreateData is not accessible.
Modifications were made to resolve the following assertion..
Invalid HNET PKI Value [0] (../lib/sbi/conv.c:135)
ogs_supi_from_supi_or_suci: Expectation `supi' failed. (../lib/sbi/conv.c:262)
udm_ue_add: Assertion `udm_ue->supi' failed. (../src/udm/context.c:144)
backtrace() returned 8 addresses (../lib/core/ogs-abort.c:37)
A situation in which you establish two sessions and release both of them.
In the first SESSION, the UE normally sent PDUSessionResourceReleaseResponse
and PDU session release complete. However, these were not sent when releasing
the second SESSION.
At this point, when the UE tried to do a deregistration,
the SMF was not properly handling the exception.
I've just fixed this.
NAS, GTP, PFCP, SBI, all except S1AP/NGAP use x1000 multiplier for Kbps, Mbps, Gbps ... etc.
From now on in WebUI all units also use a multiplier of x1000.
Sukchan Lee
Oliver Smith
gstaa
Bostjan Meglic
Pau Espin
Šimon Lukašík
Emanuele Di Pascale
theodorsm