2020-02-04 14:25:37 +00:00
/**
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* @ file stm32f7xx_hal_tim_ex . h
* @ author MCD Application Team
* @ brief Header file of TIM HAL Extended module .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* @ attention
*
* < h2 > < center > & copy ; Copyright ( c ) 2017 STMicroelectronics .
* All rights reserved . < / center > < / h2 >
*
* This software component is licensed by ST under BSD 3 - Clause license ,
* the " License " ; You may not use this file except in compliance with the
* License . You may obtain a copy of the License at :
* opensource . org / licenses / BSD - 3 - Clause
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/* Define to prevent recursive inclusion -------------------------------------*/
# ifndef STM32F7xx_HAL_TIM_EX_H
# define STM32F7xx_HAL_TIM_EX_H
# ifdef __cplusplus
extern " C " {
# endif
/* Includes ------------------------------------------------------------------*/
# include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @ {
*/
/** @addtogroup TIMEx
* @ {
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
* @ {
*/
/**
* @ brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
uint32_t IC1Polarity ; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ ref TIM_Input_Capture_Polarity */
uint32_t IC1Prescaler ; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter ; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Commutation_Delay ; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef ;
# if defined(TIM_BREAK_INPUT_SUPPORT)
/**
* @ brief TIM Break / Break2 input configuration
*/
typedef struct
{
uint32_t Source ; /*!< Specifies the source of the timer break input.
This parameter can be a value of @ ref TIMEx_Break_Input_Source */
uint32_t Enable ; /*!< Specifies whether or not the break input source is enabled.
This parameter can be a value of @ ref TIMEx_Break_Input_Source_Enable */
uint32_t Polarity ; /*!< Specifies the break input source polarity.
This parameter can be a value of @ ref TIMEx_Break_Input_Source_Polarity
Not relevant when analog watchdog output of the DFSDM1 used as break input source */
}
TIMEx_BreakInputConfigTypeDef ;
# endif /* TIM_BREAK_INPUT_SUPPORT */
/**
* @ }
*/
/* End of exported types -----------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
* @ {
*/
/** @defgroup TIMEx_Remap TIM Extended Remapping
* @ {
*/
# define TIM_TIM2_TIM8_TRGO (0x00000000U)
# define TIM_TIM2_ETH_PTP (0x00000400U)
# define TIM_TIM2_USBFS_SOF (0x00000800U)
# define TIM_TIM2_USBHS_SOF (0x00000C00U)
# define TIM_TIM5_GPIO (0x00000000U)
# define TIM_TIM5_LSI (0x00000040U)
# define TIM_TIM5_LSE (0x00000080U)
# define TIM_TIM5_RTC (0x000000C0U)
# define TIM_TIM11_GPIO (0x00000000U)
# define TIM_TIM11_SPDIFRX (0x00000001U)
# define TIM_TIM11_HSE (0x00000002U)
# define TIM_TIM11_MCO1 (0x00000003U)
/**
* @ }
*/
# if defined(TIM_BREAK_INPUT_SUPPORT)
/** @defgroup TIMEx_Break_Input TIM Extended Break input
* @ {
*/
# define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */
# define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */
/**
* @ }
*/
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
* @ {
*/
# define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */
# define TIM_BREAKINPUTSOURCE_DFSDM1 ((uint32_t)0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
/**
* @ }
*/
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
* @ {
*/
# define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */
# define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */
/**
* @ }
*/
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
* @ {
*/
# define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */
# define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */
/**
* @ }
*/
# endif /* TIM_BREAK_INPUT_SUPPORT */
/**
* @ }
*/
/* End of exported constants -------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
* @ {
*/
/**
* @ }
*/
/* End of exported macro -----------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
* @ {
*/
# define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
( ( __TIM_REMAP__ ) = = TIM_TIM2_ETH_PTP ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM2_USBFS_SOF ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM2_USBHS_SOF ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM5_GPIO ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM5_LSI ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM5_LSE ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM5_RTC ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM11_GPIO ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM11_SPDIFRX ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM11_HSE ) | | \
( ( __TIM_REMAP__ ) = = TIM_TIM11_MCO1 ) )
# if defined(TIM_BREAK_INPUT_SUPPORT)
# define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
( ( __BREAKINPUT__ ) = = TIM_BREAKINPUT_BRK2 ) )
# define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
( ( __SOURCE__ ) = = TIM_BREAKINPUTSOURCE_DFSDM ) )
# define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
( ( __STATE__ ) = = TIM_BREAKINPUTSOURCE_ENABLE ) )
# define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
( ( __POLARITY__ ) = = TIM_BREAKINPUTSOURCE_POLARITY_HIGH ) )
# endif /* TIM_BREAK_INPUT_SUPPORT */
/**
* @ }
*/
/* End of private macro ------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
* @ {
*/
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
2020-04-23 10:25:57 +00:00
* @ brief Timer Hall Sensor functions
* @ {
*/
2020-02-04 14:25:37 +00:00
/* Timer Hall Sensor functions **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init ( TIM_HandleTypeDef * htim , TIM_HallSensor_InitTypeDef * sConfig ) ;
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit ( TIM_HandleTypeDef * htim ) ;
void HAL_TIMEx_HallSensor_MspInit ( TIM_HandleTypeDef * htim ) ;
void HAL_TIMEx_HallSensor_MspDeInit ( TIM_HandleTypeDef * htim ) ;
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start ( TIM_HandleTypeDef * htim ) ;
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop ( TIM_HandleTypeDef * htim ) ;
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT ( TIM_HandleTypeDef * htim ) ;
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT ( TIM_HandleTypeDef * htim ) ;
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA ( TIM_HandleTypeDef * htim , uint32_t * pData , uint16_t Length ) ;
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA ( TIM_HandleTypeDef * htim ) ;
/**
* @ }
*/
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
2020-04-23 10:25:57 +00:00
* @ brief Timer Complementary Output Compare functions
* @ {
*/
2020-02-04 14:25:37 +00:00
/* Timer Complementary Output Compare functions *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA ( TIM_HandleTypeDef * htim , uint32_t Channel , uint32_t * pData , uint16_t Length ) ;
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
/**
* @ }
*/
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
2020-04-23 10:25:57 +00:00
* @ brief Timer Complementary PWM functions
* @ {
*/
2020-02-04 14:25:37 +00:00
/* Timer Complementary PWM functions ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA ( TIM_HandleTypeDef * htim , uint32_t Channel , uint32_t * pData , uint16_t Length ) ;
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA ( TIM_HandleTypeDef * htim , uint32_t Channel ) ;
/**
* @ }
*/
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
2020-04-23 10:25:57 +00:00
* @ brief Timer Complementary One Pulse functions
* @ {
*/
2020-02-04 14:25:37 +00:00
/* Timer Complementary One Pulse functions **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start ( TIM_HandleTypeDef * htim , uint32_t OutputChannel ) ;
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop ( TIM_HandleTypeDef * htim , uint32_t OutputChannel ) ;
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT ( TIM_HandleTypeDef * htim , uint32_t OutputChannel ) ;
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT ( TIM_HandleTypeDef * htim , uint32_t OutputChannel ) ;
/**
* @ }
*/
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
2020-04-23 10:25:57 +00:00
* @ brief Peripheral Control functions
* @ {
*/
2020-02-04 14:25:37 +00:00
/* Extended Control functions ************************************************/
2020-04-23 10:25:57 +00:00
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent ( TIM_HandleTypeDef * htim , uint32_t InputTrigger ,
uint32_t CommutationSource ) ;
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT ( TIM_HandleTypeDef * htim , uint32_t InputTrigger ,
uint32_t CommutationSource ) ;
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA ( TIM_HandleTypeDef * htim , uint32_t InputTrigger ,
uint32_t CommutationSource ) ;
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization ( TIM_HandleTypeDef * htim ,
TIM_MasterConfigTypeDef * sMasterConfig ) ;
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime ( TIM_HandleTypeDef * htim ,
TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig ) ;
2020-02-04 14:25:37 +00:00
# if defined(TIM_BREAK_INPUT_SUPPORT)
2020-04-23 10:25:57 +00:00
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput ( TIM_HandleTypeDef * htim , uint32_t BreakInput ,
TIMEx_BreakInputConfigTypeDef * sBreakInputConfig ) ;
2020-02-04 14:25:37 +00:00
# endif /* TIM_BREAK_INPUT_SUPPORT */
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5 ( TIM_HandleTypeDef * htim , uint32_t Channels ) ;
HAL_StatusTypeDef HAL_TIMEx_RemapConfig ( TIM_HandleTypeDef * htim , uint32_t Remap ) ;
/**
* @ }
*/
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
* @ brief Extended Callbacks functions
* @ {
*/
/* Extended Callback **********************************************************/
void HAL_TIMEx_CommutCallback ( TIM_HandleTypeDef * htim ) ;
void HAL_TIMEx_CommutHalfCpltCallback ( TIM_HandleTypeDef * htim ) ;
void HAL_TIMEx_BreakCallback ( TIM_HandleTypeDef * htim ) ;
void HAL_TIMEx_Break2Callback ( TIM_HandleTypeDef * htim ) ;
/**
* @ }
*/
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
* @ brief Extended Peripheral State functions
* @ {
*/
/* Extended Peripheral State functions ***************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState ( TIM_HandleTypeDef * htim ) ;
/**
* @ }
*/
/**
* @ }
*/
/* End of exported functions -------------------------------------------------*/
/* Private functions----------------------------------------------------------*/
2020-04-23 10:25:57 +00:00
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
2020-02-04 14:25:37 +00:00
* @ {
*/
void TIMEx_DMACommutationCplt ( DMA_HandleTypeDef * hdma ) ;
void TIMEx_DMACommutationHalfCplt ( DMA_HandleTypeDef * hdma ) ;
/**
* @ }
*/
/* End of private functions --------------------------------------------------*/
/**
* @ }
*/
/**
* @ }
*/
# ifdef __cplusplus
}
# endif
# endif /* STM32F7xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/