From 03564781cc4938f8db6c6453512446c81fa89d27 Mon Sep 17 00:00:00 2001 From: Frank Voorburg Date: Wed, 6 Jun 2018 20:14:08 +0000 Subject: [PATCH] Refs #362. Added TrueStudio support for the Olimex STM32-P103 demo programs. git-svn-id: https://svn.code.sf.net/p/openblt/code/trunk@515 5dc33758-31d5-4daf-9ae8-b24bf3d40d73 --- .../Boot/.cproject | 150 + .../Boot/.project | 95 + ...lic.truestudio.debug.hardware_device.prefs | 11 + .../Boot/.settings/language.settings.xml | 13 + .../Boot/.settings/org.eclipse.cdt.core.prefs | 164 + .../org.eclipse.cdt.managedbuilder.core.prefs | 11 + .../Boot/.settings/org.eclipse.cdt.ui.prefs | 3 + .../Boot/Debug/openblt_olimex_stm32p103.elf | Bin 0 -> 289832 bytes .../Boot/Debug/openblt_olimex_stm32p103.srec | 1289 +++ .../Boot/blt_conf.h | 223 + .../Boot/boot.dox | 7 + .../Boot/hooks.c | 471 + .../Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.c | 784 ++ .../Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.h | 1818 ++++ .../ST/STM32F10x/Release_Notes.html | 284 + .../DeviceSupport/ST/STM32F10x/stm32f10x.h | 8336 +++++++++++++++++ .../ST/STM32F10x/system_stm32f10x.c | 1094 +++ .../ST/STM32F10x/system_stm32f10x.h | 98 + .../Boot/lib/CMSIS/CMSIS debug support.htm | 243 + .../Boot/lib/CMSIS/CMSIS_changes.htm | 320 + .../lib/CMSIS/Documentation/CMSIS_Core.htm | 1337 +++ .../Boot/lib/CMSIS/License.doc | Bin 0 -> 39936 bytes .../Release_Notes.html | 342 + .../inc/stm32f10x_gpio.h | 385 + .../inc/stm32f10x_rcc.h | 727 ++ .../inc/stm32f10x_spi.h | 487 + .../inc/stm32f10x_usart.h | 412 + .../src/stm32f10x_gpio.c | 650 ++ .../src/stm32f10x_rcc.c | 1470 +++ .../src/stm32f10x_spi.c | 908 ++ .../src/stm32f10x_usart.c | 1058 +++ .../stm32f10x_conf.h | 77 + .../Boot/lib/fatfs/ffconf.h | 266 + .../Boot/lib/fatfs/mmc.c | 670 ++ .../Boot/main.c | 216 + .../Boot/openblt_olimex_stm32p103.elf.launch | 40 + .../Boot/startup_stm32f10x_md.s | 370 + .../Boot/stm32_flash.ld | 178 + .../Prog/.cproject | 133 + .../Prog/.project | 26 + ...lic.truestudio.debug.hardware_device.prefs | 11 + .../Prog/.settings/language.settings.xml | 13 + .../Prog/.settings/org.eclipse.cdt.core.prefs | 164 + .../org.eclipse.cdt.managedbuilder.core.prefs | 11 + .../Prog/.settings/org.eclipse.cdt.ui.prefs | 3 + .../Prog/Debug/demoprog_olimex_stm32p103.elf | Bin 0 -> 127532 bytes .../Prog/Debug/demoprog_olimex_stm32p103.srec | 240 + .../Prog/boot.c | 432 + .../Prog/boot.h | 40 + .../Prog/header.h | 43 + .../Prog/led.c | 99 + .../Prog/led.h | 39 + .../CMSIS/CM3/CoreSupport/core_cm3.c | 784 ++ .../CMSIS/CM3/CoreSupport/core_cm3.h | 1818 ++++ .../ST/STM32F10x/Release_Notes.html | 284 + .../DeviceSupport/ST/STM32F10x/stm32f10x.h | 8336 +++++++++++++++++ .../ST/STM32F10x/system_stm32f10x.c | 1101 +++ .../ST/STM32F10x/system_stm32f10x.h | 98 + .../CMSIS/CMSIS debug support.htm | 243 + .../lib/stdperiphlib/CMSIS/CMSIS_changes.htm | 320 + .../CMSIS/Documentation/CMSIS_Core.htm | 1337 +++ .../Prog/lib/stdperiphlib/CMSIS/License.doc | Bin 0 -> 39936 bytes .../Release_Notes.html | 342 + .../STM32F10x_StdPeriph_Driver/inc/misc.h | 220 + .../inc/stm32f10x_adc.h | 483 + .../inc/stm32f10x_bkp.h | 195 + .../inc/stm32f10x_can.h | 697 ++ .../inc/stm32f10x_cec.h | 210 + .../inc/stm32f10x_crc.h | 94 + .../inc/stm32f10x_dac.h | 317 + .../inc/stm32f10x_dbgmcu.h | 119 + .../inc/stm32f10x_dma.h | 439 + .../inc/stm32f10x_exti.h | 184 + .../inc/stm32f10x_flash.h | 426 + .../inc/stm32f10x_fsmc.h | 733 ++ .../inc/stm32f10x_gpio.h | 385 + .../inc/stm32f10x_i2c.h | 684 ++ .../inc/stm32f10x_iwdg.h | 140 + .../inc/stm32f10x_pwr.h | 156 + .../inc/stm32f10x_rcc.h | 727 ++ .../inc/stm32f10x_rtc.h | 135 + .../inc/stm32f10x_sdio.h | 531 ++ .../inc/stm32f10x_spi.h | 487 + .../inc/stm32f10x_tim.h | 1164 +++ .../inc/stm32f10x_usart.h | 412 + .../inc/stm32f10x_wwdg.h | 115 + .../STM32F10x_StdPeriph_Driver/src/misc.c | 225 + .../src/stm32f10x_adc.c | 1307 +++ .../src/stm32f10x_bkp.c | 308 + .../src/stm32f10x_can.c | 1415 +++ .../src/stm32f10x_cec.c | 433 + .../src/stm32f10x_crc.c | 160 + .../src/stm32f10x_dac.c | 571 ++ .../src/stm32f10x_dbgmcu.c | 162 + .../src/stm32f10x_dma.c | 714 ++ .../src/stm32f10x_exti.c | 269 + .../src/stm32f10x_flash.c | 1684 ++++ .../src/stm32f10x_fsmc.c | 866 ++ .../src/stm32f10x_gpio.c | 650 ++ .../src/stm32f10x_i2c.c | 1331 +++ .../src/stm32f10x_iwdg.c | 190 + .../src/stm32f10x_pwr.c | 307 + .../src/stm32f10x_rcc.c | 1470 +++ .../src/stm32f10x_rtc.c | 339 + .../src/stm32f10x_sdio.c | 799 ++ .../src/stm32f10x_spi.c | 908 ++ .../src/stm32f10x_tim.c | 2890 ++++++ .../src/stm32f10x_usart.c | 1058 +++ .../src/stm32f10x_wwdg.c | 224 + .../Prog/lib/stdperiphlib/stm32f10x_conf.h | 77 + .../Prog/main.c | 152 + .../Prog/prog.dox | 16 + .../Prog/startup_stm32f10x_md.s | 371 + .../Prog/stm32_flash.ld | 178 + .../Prog/timer.c | 106 + .../Prog/timer.h | 40 + .../demo.dox | 9 + 117 files changed, 69206 insertions(+) create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.cproject create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.project create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/language.settings.xml create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs create mode 100755 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.elf create mode 100755 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.srec create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/blt_conf.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/boot.dox create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/hooks.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS debug support.htm create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS_changes.htm create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/Documentation/CMSIS_Core.htm create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/License.doc create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/Release_Notes.html create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/stm32f10x_conf.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/ffconf.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/mmc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/main.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/openblt_olimex_stm32p103.elf.launch create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/startup_stm32f10x_md.s create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/stm32_flash.ld create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.cproject create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.project create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/language.settings.xml create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs create mode 100755 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.elf create mode 100755 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.srec create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/header.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS debug support.htm create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS_changes.htm create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/Documentation/CMSIS_Core.htm create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/License.doc create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/Release_Notes.html create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/misc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/misc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/stm32f10x_conf.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/main.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/prog.dox create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/startup_stm32f10x_md.s create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/stm32_flash.ld create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.c create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.h create mode 100644 Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/demo.dox diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.cproject b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.cproject new file mode 100644 index 00000000..6c0a2010 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.cproject @@ -0,0 +1,150 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.project b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.project new file mode 100644 index 00000000..fc480ca1 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.project @@ -0,0 +1,95 @@ + + + Boot + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + core + 2 + OPENBLT_ROOT + + + + + 1528314570971 + core + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-ARMCM3_STM32F1 + + + + 1528314570974 + core + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-third_party + + + + 1528314587746 + core/ARMCM3_STM32F1 + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-GCC + + + + 1528314602954 + core/third_party + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-fatfs + + + + 1528314623914 + core/third_party/fatfs + 9 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-src + + + + 1528314638683 + core/third_party/fatfs/src/option + 5 + + org.eclipse.ui.ide.multiFilter + 1.0-name-matches-false-false-unicode.c + + + + + + OPENBLT_ROOT + $%7BPARENT-3-PROJECT_LOC%7D/Source + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs new file mode 100644 index 00000000..9f4e4c5b --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs @@ -0,0 +1,11 @@ +BOARD=None +CODE_LOCATION=FLASH +ENDIAN=Little-endian +MCU=STM32F103RB +MCU_VENDOR=STMicroelectronics +MODEL=Pro +PROBE=ST-LINK +PROJECT_FORMAT_VERSION=2 +TARGET=STM32 +VERSION=9.0.1 +eclipse.preferences.version=1 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/language.settings.xml b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/language.settings.xml new file mode 100644 index 00000000..7020b89e --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/language.settings.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs new file mode 100644 index 00000000..f6753e14 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs @@ -0,0 +1,164 @@ +eclipse.preferences.version=1 +org.eclipse.cdt.core.formatter.alignment_for_arguments_in_method_invocation=16 +org.eclipse.cdt.core.formatter.alignment_for_assignment=16 +org.eclipse.cdt.core.formatter.alignment_for_base_clause_in_type_declaration=80 +org.eclipse.cdt.core.formatter.alignment_for_binary_expression=16 +org.eclipse.cdt.core.formatter.alignment_for_compact_if=16 +org.eclipse.cdt.core.formatter.alignment_for_conditional_expression=34 +org.eclipse.cdt.core.formatter.alignment_for_conditional_expression_chain=18 +org.eclipse.cdt.core.formatter.alignment_for_constructor_initializer_list=0 +org.eclipse.cdt.core.formatter.alignment_for_declarator_list=16 +org.eclipse.cdt.core.formatter.alignment_for_enumerator_list=48 +org.eclipse.cdt.core.formatter.alignment_for_expression_list=0 +org.eclipse.cdt.core.formatter.alignment_for_expressions_in_array_initializer=16 +org.eclipse.cdt.core.formatter.alignment_for_member_access=0 +org.eclipse.cdt.core.formatter.alignment_for_overloaded_left_shift_chain=16 +org.eclipse.cdt.core.formatter.alignment_for_parameters_in_method_declaration=16 +org.eclipse.cdt.core.formatter.alignment_for_throws_clause_in_method_declaration=16 +org.eclipse.cdt.core.formatter.brace_position_for_array_initializer=next_line +org.eclipse.cdt.core.formatter.brace_position_for_block=next_line +org.eclipse.cdt.core.formatter.brace_position_for_block_in_case=next_line +org.eclipse.cdt.core.formatter.brace_position_for_method_declaration=next_line +org.eclipse.cdt.core.formatter.brace_position_for_namespace_declaration=next_line +org.eclipse.cdt.core.formatter.brace_position_for_switch=next_line +org.eclipse.cdt.core.formatter.brace_position_for_type_declaration=next_line +org.eclipse.cdt.core.formatter.comment.line_up_line_comment_in_blocks_on_first_column=false +org.eclipse.cdt.core.formatter.comment.min_distance_between_code_and_line_comment=1 +org.eclipse.cdt.core.formatter.comment.never_indent_line_comments_on_first_column=true +org.eclipse.cdt.core.formatter.comment.preserve_white_space_between_code_and_line_comments=true +org.eclipse.cdt.core.formatter.compact_else_if=true +org.eclipse.cdt.core.formatter.continuation_indentation=2 +org.eclipse.cdt.core.formatter.continuation_indentation_for_array_initializer=2 +org.eclipse.cdt.core.formatter.format_guardian_clause_on_one_line=false +org.eclipse.cdt.core.formatter.indent_access_specifier_compare_to_type_header=false +org.eclipse.cdt.core.formatter.indent_access_specifier_extra_spaces=0 +org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_access_specifier=true +org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_namespace_header=false +org.eclipse.cdt.core.formatter.indent_breaks_compare_to_cases=true +org.eclipse.cdt.core.formatter.indent_declaration_compare_to_template_header=false +org.eclipse.cdt.core.formatter.indent_empty_lines=false +org.eclipse.cdt.core.formatter.indent_statements_compare_to_block=true +org.eclipse.cdt.core.formatter.indent_statements_compare_to_body=true +org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_cases=true +org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_switch=false +org.eclipse.cdt.core.formatter.indentation.size=2 +org.eclipse.cdt.core.formatter.insert_new_line_after_opening_brace_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_after_template_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_at_end_of_file_if_missing=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_catch_in_try_statement=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_closing_brace_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_colon_in_constructor_initializer_list=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_else_in_if_statement=insert +org.eclipse.cdt.core.formatter.insert_new_line_before_identifier_in_function_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_while_in_do_statement=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_in_empty_block=insert +org.eclipse.cdt.core.formatter.insert_space_after_assignment_operator=insert +org.eclipse.cdt.core.formatter.insert_space_after_binary_operator=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_arguments=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_parameters=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_brace_in_block=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_paren_in_cast=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_base_clause=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_case=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_labeled_statement=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_base_types=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_declarator_list=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_enum_declarations=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_expression_list=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_parameters=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_throws=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_invocation_arguments=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_arguments=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_parameters=insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_brace_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_bracket=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_cast=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_catch=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_exception_specification=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_for=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_if=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_parenthesized_expression=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_switch=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_while=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_postfix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_prefix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_question_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_after_semicolon_in_for=insert +org.eclipse.cdt.core.formatter.insert_space_after_unary_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_assignment_operator=insert +org.eclipse.cdt.core.formatter.insert_space_before_binary_operator=insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_brace_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_bracket=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_cast=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_catch=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_exception_specification=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_for=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_if=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_parenthesized_expression=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_switch=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_while=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_base_clause=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_case=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_default=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_labeled_statement=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_base_types=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_declarator_list=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_enum_declarations=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_expression_list=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_throws=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_invocation_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_block=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_method_declaration=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_namespace_declaration=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_switch=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_type_declaration=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_bracket=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_catch=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_exception_specification=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_for=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_if=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_parenthesized_expression=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_switch=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_while=insert +org.eclipse.cdt.core.formatter.insert_space_before_postfix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_prefix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_question_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_before_semicolon=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_semicolon_in_for=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_unary_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_braces_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_brackets=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_exception_specification=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.join_wrapped_lines=true +org.eclipse.cdt.core.formatter.keep_else_statement_on_same_line=false +org.eclipse.cdt.core.formatter.keep_empty_array_initializer_on_one_line=false +org.eclipse.cdt.core.formatter.keep_imple_if_on_one_line=false +org.eclipse.cdt.core.formatter.keep_then_statement_on_same_line=false +org.eclipse.cdt.core.formatter.lineSplit=89 +org.eclipse.cdt.core.formatter.number_of_empty_lines_to_preserve=1 +org.eclipse.cdt.core.formatter.put_empty_statement_on_new_line=true +org.eclipse.cdt.core.formatter.tabulation.char=space +org.eclipse.cdt.core.formatter.tabulation.size=2 +org.eclipse.cdt.core.formatter.use_tabs_only_for_leading_indentations=false diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs new file mode 100644 index 00000000..594657c9 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs @@ -0,0 +1,11 @@ +eclipse.preferences.version=1 +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.688766547/CPATH/delimiter=\: +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.688766547/CPATH/operation=remove +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.688766547/C_INCLUDE_PATH/delimiter=\: +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.688766547/C_INCLUDE_PATH/operation=remove +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.688766547/append=true +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.688766547/appendContributed=true +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.688766547/LIBRARY_PATH/delimiter=\: +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.688766547/LIBRARY_PATH/operation=remove +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.688766547/append=true +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.688766547/appendContributed=true diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs new file mode 100644 index 00000000..e1896bba --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1 +formatter_profile=_Feaser +formatter_settings_version=1 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.elf b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.elf new file mode 100755 index 0000000000000000000000000000000000000000..6a7fc33ee4cdc369a17e3c1c77a922ae6b4a6da4 GIT binary patch literal 289832 zcmeFZ33OCN_CH?r-s>evhja*F2!V9E(-262hJYfVgid%Y0omLYO#*0wD9xtPamEH* zz!gLtWN{E&K-3|@%osHzjykS0(+$o{5SK>OM&i8yx-Zb4+Q`Df8Wz;HDetVMnxy$9V zH-5yKgJc81$XYL#^{bVq%6ho9k@!srr?6$e^G&XVi`26`9^#|EtV=I+G^Nkz9qZ*Y zHJ6$mjq#ABxrfQr!Aw(5Z=b%kgN}{P*;D-zvS}+=lIsd zScp3!jSSANGON9Q^|`zNN^x1gs*F}P(-dHl=ek%VwewDI>w$4)Syj%6BxRLDKEm;45vI$JD!ZyG zBf`^6K^A!!@~1jTep}4sxpKg^nBw8%`k6|OOC^mlvxAS#D9N98up*<%72$FQbbQu9 zX}Y>~AWa{19Mp9TC_5NqPD<@fybs2*olc$325n35ZJ?C|Uvc)F_GYZuDYZtrL@npbuh*2!rT zb?f$y$cQLuJ%Tx~bnl3(Qj1SqU%Ann8eopBX$PxHA`barxo`40dgx(mNraVr7w!e$ zOUPB4lsjQt?X1Dx$RZPvo5pq)+0*WblovZ9cQBzWk)2W_`&i`qPLDcRb*gg*Y^`HMP6U08N||ZemE}^)+L2e5k8*yD93f4I zRP5r{Pm-o(RF_2jaz+KX;Eky_sogEiR@l3VtWcUurHw3U+QG~BcuzEuZv!(;OD>&L zl~KCQ`^^EVETuH_wlR&GV@%^Hv?W7_t;D_%E+Qj6_=2`ZrEm<+%-V)#KizKyggzH?x&3)1oUi z?m!O$r@z_IZ(=i7sSLP1sA>6^2DIo3tw65}Jk1&$tfPQ7R>9meBRn}Nq(zr$Gb1ed z!qDY0i{}aNh#((*$52nxp&0Z3mRXxEDM`&1`I@SIb@?&3hegucOZ%Ub&}Ture5!** zEbY{`NlTG!PfUVTysflrYg@O}dts6_!xp{0S7=d>HcM?h7JG>JZKy3& zKB;O-*(R?wps2}Zk9*C?$p+2Q!1631%XAh}rVmyfsuo?YS!*3CaLVflx60^a%b7KT zzI5m}k%?y2rkmMwKd~ zY@vzZP1R(TrdoIT6X zYgc{wEvNEL znYIz7SD=nmbJe6NT6Co5Yczaj_zK`7J>)cvTf57T(wa7)M_IqD%|=R-ef2iggp{0d zvs$jF(?6~aL%qm12e@9AlmAJV9b*=icvgVbui2YAZEn?us+7_oTzYj%>1? zS$&f!KIKP&v%=Zn>~Ou{(7#zpueIKmuu=&SIyrG!omFd1@GJonc)h`6wN$^*%3Vf1 zr}AJ^4E@xn4$`cR^d6pgS0vs$6Yp;l@0F1@z+B4`Dv)sk%LNTfHd)0n#S} zTXQ8yTowC1jN1Bo0R6wO-d&bm^IAimUT1hd4>(j`V{Tc$8b0oD-GqW@lNP;I8$e^3 zvwvBZk30L~`E8gi=}S^YeWqlVYSAT{qVoJ?^l+70PvE+sXp^_^A(od~mhJmnIIS$J zhL1c@m*q=F9JGc2%X>eZJe7K%n>(3Pflf0*3Vg4JSzaUN02i2NL@bFzI>DS^g%;2i%e-_`9B1;=)lfz zp}Q3NrodV2xt_8XwQ4eQNM%EHIi+-o_$n@E_6ZB8%J&`Y`xz z^h_C`Yr(hIOOfAqqF-%Srqj$>i}ui%K7+LBA!=JG=#L91$i%{TeaAAa~Dkd>42 zr9*Pdd5qeT+~QH>$d?_C(vliEBFj<%4}|LMjgIjhVVbwtRFJU9_!7sB9)PD^^N1DYb;G-fQUL)W6I}Y4-@ApVULGjZ$P-C$&J- z%tr2%kb*HQB7Kx!1t`or%W63=w-9|7W>=2!ZDBbwv*U)E%u;VnPt22fkoY4CEP;`5 zML>@H5**FOI2`pRl1Ga!(oE`|b;`Na78huyQXn+`sXFOgUU;hMyOQtfh<~|umoXk7 zrmvCa1d7^6U8_D>y9qNFExH#v-iNSfpi@ub$eaR4^266tnwPm|sK}bxM)(9S@=h_@(~5twV}KO|#|1Gc5qF;68t5T#- z2Zd&I3|2!mS~M-bJ9|6cDe=Mm%kj3vclUSTEyqcgbzBA6uJ(#52jYLzLG|rU{|xX> zw#!ac&(&1;zHOI)!r^x0&&MM-#F=w~9_B^ZXYDe={@i{cth@#x=j$OX@1bz-(n$AJHG`v~pKc!p*&XfGRr!ejV28gp7yixd^!#sl=bCmiLViF9 zW=AM#qi@Pa9V>==%gP*8c%#?1*1&CryB~cP^;;42IUmBm!p0m;c;7ySSuZ(LPcDYm zY|W@A*P))=5tuoJo$@a;YRV5?CcUOyA7DdAeL4-+lc4;dtX&k#)IJumq;@k>8m#_Z4+*!k zd~aYh_@~>3o>l+uXsv$H18y^BTwg)vfM2OVC7^fQokuMPJ@=)N{HLU*)LSrs8P zLl5nZkZ0N~2zj)P%4#4&QuPpE|9UsxS+d5L)Z-2CGSnfp$u*LX zd-w=Gt}RGXpvQKA^1L)DTduLz^vmL7mB94ue5`y}L2DpW^L?_bLZU*7+C79US8~jd#Y3mA7P}PkavjM^O#>v4F49)Y1!_C$-Y!tT-Ab zDVy3`-B73Kl22>ha)WJ(F1c0fUW@wGG}X|zTD$z!3u;V}2_}Alsd(cg#1)nr79)9m1;H!&CZ z9`4ZBzyI<)n_oJWS+Pe^LbhyB%a*6PK3K-`Y|C?1i*ElUEvZF2*W9ei=H@kKw<=)| z)K-|@M0Rb%uF9BLpIQ7|8|)gal4V0RHuSq7LRTISpC#i-X_y)*PP!+?)?;5`4d$gt z*N44N6UN?bHN~k#2WTefwYYLZd_>yd)F$lTG1gon&#}_FrZuppb#2j_NUr=t*rkqK z+p|_Wm*pN0XRBX@uN)xll1t^7H9IdUDUhKm*dvo#JpBB@Er+C*^Z57SU**bbhAx59 z9`%UVdZ1vQqo6IQgdC1cpG~z4PHL*iF6e6+a=J;{WiPeItTsNfB`odrHF8+T9B=ZH z^2)8oazl!oI5=JGm{vf+|-z&46O{Z`PzVFh{IWQUA1vwRkMtHBvoaErx7L=Pu|t z>T@kRnYE*Oqt|}m=^ATjXZ3(mL#7-uZ5{jqKD4!oG;lb2`|96Zbf32uc6(AWTloui zRjjohtfshYh^hcviuZVjy_OGz^`pP4j9^yzJ?4{k?8P$In?B0Zo0XWKV?Rj2+E6($ z%z?E-eA?+tT$?cel8M)H9a>IO96O9yH*WIU0!qtjaG1_fz~KRj)|CmTPP~}*a3ZG3R$FR)u?hyByMrl{Gyhu9IvC56lB9$WY8)* z%_jrNj_f1YYdu0MnPYY3=rPx{6Q*QW+L1xE-BL+MST4=h9?_)y{sA^n!PsnB#q)aV%X2X8KOt&Shw2T7^HC=nLv&93cjz5Kz78RT&U4GTkptM{J z`X;J`o9AKI1coLc> zBKEYd)v5znq@@){cKVf;67Y&K(vkLApeKM;NzF`_o3k>udG|*i z@PC(8-w{2yfAQ&4OCRu-H}OF;b&4I52T7wBR(xGCvea2wRJyZL9zHjyv|I^& zsa-68Y4DX6mgWQJYH*Ue$}3-BrW0E4mzyscUVV^ij;rEmx!>hlDi1G&R5_$tu$mYc zT$)X#Q5(0uijrGu)Tu8!jXHG>Bt4Kk(m4<{#~xHpnXp>@xHAvFB>2qm9qe>eD5or- z{?ZvLALJV_En_V&+ESO{Kk8?Wo*`+_wlLY27noLBSt$+Y!5dj^SnrV|++=E=YkDr6 z;!yUYU%kiXpq;r`m^)5~Qyr~vC*UG*-@|aDf zMmb}xn$P3$pbsC{X~=w(PN}wcb*H)=GVz4WuuezBS8VhbWGStqELF9qSdMg1(nlN` z2h$@tX%gBnjYA_U?yBnFFb;WShkm(eWy832`hu-4JJx8mcl+@ujU5Ot-)o_YD0s=JCP5I#dGe`9W#mZJ~2uFZx~BHyLGcnO+9cz?(uS z11kq&m*-;dzRQf(upnq{;YshFv|53z;tH6Wt@6e;k4MIue=L_;@2JcuIb64^bZyMz z;jU)iV8p&6m-e|X*5j83-#ckdnqK?PNlVY&rR!oI2T7eD>Ztn?buEc>Ih+{7-Z?1` z8e4Lp?%Ob>-wWxFLj3$!yUVJfE+3_}qJv^*g-GV3bnM4MW>dqUh;Q;!Olgg;@Qf-f zrB-tZ_WXSl&o3eR8a)mRN%}5xY>i%es<~>dI-=oJ)dRK5tG9X64sv&D2=jjIcJlnm zhY0nlfo0X}z3Rb9D#lTFp=t}|>ZosqjIWmGpC2Hpa|6$Ni*Vkuym~82hYu|{B;{c? z5Ya~F>SZ_)`<(WMm(k981a~&HmKRkotCq%Y^zs9ITv0{QttHr{E?VkRdxo5&aZxg%GEg}bS1T!k(6tbCSh#N z4b86}rf&20KQKbKeSF-cz6;y?>b7SFnA7N^zmH4myBmVmp$(&DkIrC;lHH?~HL9_w0#a+so*!<4{s)cmmr z2}1?@QacmzE2=4`J?rGjSf&-KHjnYRXV3)xn{kuys>?%ULtq3M=EjF zV_m*()1;IG+;!4N(g!=(tElPLlZ$xKNsRC(7wtq%KUw)!tk-%YUUmESirryqQCRrs z&$DTRV?1M+7o?$vG1TI3FsAHppwWSA87lk59ef+}Hb+*vJ1}oA`=~y+XAOLMe^D761w1JGA zZdp3|oCqvCQcFF|vJR8_a>J48QCO9mSJ= zhqOKoYXc956?bYal~O*Ps;%(>3saT3dg7v5)UE7*7A^0R)qO~T`Ur0a+ET+8)nDbN zV~6^<&sqJL*L=vZU`z>Lw7Y7F{;@ujs&3oGH{M#nNd z4x};+Yb)l0c29PL*&)+t`A~|}k?R5KquQv=@*>DO97EcHS}f47c1lFnH7zDhUOsko ztfynxkki4L5o-!kN&a(8*`6HQp^_i#|A&>(^hqfJidCk{=!>DvciBG2@Kb?d!&?F$ zPf9y5eNt-Rj^PuU*zjpVlDl?L(IPpP>?>1~TX^!9;a6Ky($WIcQ6DH2+79w9TNq|g z8(l~x1*uw-gJB9QT9j4u)sT|Ft1Z^Fk^q04;}pXNKgTYvTreS!8IjV=LB54{b$P+q zfHGuUplH#WSPEto{xHiOqq4|_nnlg5-QME2^eg*(-js-BtqY&8_63^zV=Vv0;Il0g zXIm3g` z>;ACWQ3~e`UyL=@TUc9{;~lGKuKQN5sb&Q?1X5MATC#}xwT!?T)Rf<3XRf`xmZ7|l z$33<2LR-_2zUxl&I$Eu*p)eK&^;^ZIe8f$ zX%E>4WrucUu35=Prl`pU{hA`xS7g6=wWA;!Fco|iNE-ZAU{_|zGFJF~a3|)V`|J9m zMn$UGFRX))G+75(yrF;tGuThVqZ;;PvfRg4o~-Wo3%Ma#9fI`dE<0I$__l&&k?L$u zJQ~sR%Olm9puX02`6JbRKpoMJ`Ozcm>w{J37ie7_kN#cT`|73`oApmC>p?%RtcU9> z>vNj2v4SlwjYk`?(qY3RSVd>!7QwG@>T5!MIUlQR7P%#UkGEIwJoOUw%P_QhXuaJt z@N6wYJv$rp*~LBjOyg&sM(9su^fj>2j|FhLPd($+9W=kV2KAnLA?n#?s>%9zH@{LF zWb^^=caqHX;FHzG=q(D`$TunYRdoUOS&IYT+{Pmlq#aAYDmWTQk65vyNgMK6Fl|V$ zz@P@|T{gv5O&S)+UG%|ibQ?$sra1G}c=RUCvCl|T8}vbV`y!VAZh&%U4m^sURF1qZ zJF6=zbJSOFJm}7e&mhayjOF`LfPcxynHz!R|jrlywL%%d?40qBzjB~cicg3Rz z;@e_rkmqRw(5u~xxO*!3p!vgXP2*Ir%6HF#J)1ScwlBtAYXd(o5?(O8JkZdhqy>T$ zm*TvQbPYXH+K_;4)DWB_DWjgU@=?ZK;*w51?)U-028`)11$XP?;P@Esj^w`(bU0b= zvFdpA(Rhk;@FJq_i65^nSacZUPo|u)oJQ=;VV>6%9$fuob7?wRb8b7u{YNl=Q9Qa0 z{g0tBL)Z9WaGd%@-8a>{5XLl$&Gh-{)((o(806!_!B;S2vm`CSx@G3KZ(T%VRy_JX zM#3o#F6?|+QHJSic@2+vI&l{6&c|rvx|J84q*a*Nm}7VlV?3?+b7`d($60zBPD$zA zV=ArA;?b;lZZ)mU;y6=3QbjAXc+?*MqMDEVqLRBt==z_-d7EqLJFugB?PRaNb1z@d zHuO@JUATGEKOP;2Q<}`fJ+KGh@ZfX`JtW`K{Z5+Z1$TZeFQn5ba|q+d?kZUEvBpBQ zmZSZJjxepwP)|xW?&TY3z5Ak{PKB6DF30}9Wvpu6O?6>E@=s>~+x_M(mW}eBw2d>% z(l_$QExR<7hzaZGv@ILkQc#12AMO*$PP-Mm#v=mC&>?}z5v!$l!#QY?qk}W_HwVvQ zF>g7%$W_^6%lt|fqwjQWFSoX2qZg~`3Y9b0{1x*nj#dm>F|hpP z+MWJuLT2}$!<6oNr2E(KwwM!jG#xFv59S?ESai@99$3Ci)I|Jq|pDkj}sVb#9rJay? zJUBu%Z;D5c!3NraFmFCs{!o|=eE{{I?6Id=V2_k`SAg2j>VU=V$6V-F;Uv_T44N0L zc@4NTRxyR{`KHd^3f}n~D+EA7NKx#6Mb5q4!E}oMJ0q z^s)n^)%+1d)ZEfyl-}<Nf>O%Q&HdQ0?Sc8#Z=SSDY)B|5Z?20a zZ%=N~#%3L#JH#4f1zUsLt9bqs`W*j>!1fAx8_fyh(fUqc9Z1Fw4BvR|@k(2nNhl&e&}d7?^o{}r>ddtf)^M+tofdHMf z@cfPX`e`FdV`r7zu)W;C_Q9aMg>QVaIuoVyb;laCg~tL1OIId8gOV}HeDj>{vN08? zSHeE7*PK$6&RxMH=%Z8k1Ku@FH%hy4Pwh(VwdHd|;s?wJ?+Xw@rD4jA1GR4gP8C+8 zZS+u+2d4(+z`Erp)0>RtPE#pqY3>$N=|U5wtJ=PP=B zPy*Y_BYGXaUa!v!LUjL;#xavxkC}CTfDavfh;O+HJ1Oo1Pgl&ZE12K^0aOLF!MqS<0}o7>rtjo}|6FfqJnbJspqU%7%tm^QCU=eYo}B zL_S*kMfIcq(vKM>m>dh8X?w=*y;0X#q(NKX@D(hhR-zm_ikfZIw=qDScI=q@uX_7D ztv^qq-fY0Qn~HJ5q>qN@cPc0&hnkLAm$WB!V@g>X#zGTD2i}2Gfc%zVYGO1rA7(?3 zBR>@OO50aqbKX&m=hXN6>bF9tl+bAJG;K-WXlTtweU|q0-8itUAGD?;=HJ^5t$h<( zU5B^Drs*>?N6_}F>50t8Y1}Np$Yk*CY3BsYk6G7aw*zDMi(QIZ(_qjc)GpRwaVZ7n zK(?xc%z2-MEqR}yb+E!Wf|Snhss>#TB(BO!gb~ z(2urx4t5V&-tqxky}drZK}9{^O}hmfJJ}Xqkb?10@uU{~5LlF5;Nzo`v6IzXJr?eb zk*>g(U0d9ZIQEq7^^fTDX6BMM${S_ONjdC^cjeZw!LgvUnGLZWzCl%XQyc2vHKl=V zkv4C}xstr87upJ1xu>1>+B{MH*@{+mM}D6}BWkt$o=yHSNo7SbJDq5{?!bAJdD=*< z!`IX8XzYTY3j2$i>WtIQDy$jzp7LL7KHx0NTAQ_Ry*Kw@~$egt&AsOuV2Z=FuIFt>Z@!lhl&XFInq{c5Ru*}`QO-8$T5 z(&LP&?~2aoI##Pi@7L0%bGO?^vFw-uV+M$L_aR=m?#faT)kD^XO{F#VBimK!pyBAc}V|lyY$PtuIQZ35$Z()*x*ya@#S=OU{7H4MgNIa+ZW@GgXYk4 zyK||LE6mUn*qGGRvaO4|qSnqu*%JpiRAAL!UTYxRh4G({*|}IoZj2JgoiXI)`}jZS z<(m!(dFk;f76?^cFg;6Iu=|1~U!VUg9AaiF2)jJd2Y4UAeuqIaG zpjy4zN44F+z_@>R=Ekm$3%-acBiU{le9u&)6)1tx(|Xo$to-RN>B0EOvW>A44==bf zFuZJETdAE5KJjU$%3XeNWses9gLXXp-nh{PDq5}_DVj9NJ89B{bH|@Q=|BAP2K38? z$e>9>hC<6b@%O{H#~6PH&*kyA@U&}h;CV&-4|vXszl!Gt@t5%|jMwAYTdTu!r1o1p zZ;U^W=at%SJa5pR!SkB<&aeaJV2l4IOtsn?-%jHO+7_#SXYb6``?313!v5OjTD5+c z{l(5=^oMh6x5cdb>O%^02S!Q9Wc~g)L+|QAd!>8Y^tRSprZD6`e`K=LG*ydgvCIa# ztGFhX@1(o4)->jDK+ayD3heSn@&bFHD|)$plfO7OX$p&MYRg2enTcEcrw`EW`Awbn zMhWk&9dw_S;?tdIBP~-x2i@%@nR`2MeyGdPnR!|ww0AHSmULmhZ~r(sVI7_EB!#R< z@9H*xu33Mx{5G7h(3o%{NbRFLt<`&(i*IBb3vmm)q}7jm;6vyRaVslg*ny#a7`CNf z1K+am)b=GUL6?4OoJ}xe*2fUSQEM=d#OS~_M#I_on#>!q<0~@ys!Z13Uj6H`ou~YB zudKSV+;HAje6;(Z^B^Q%cXXMUh&Q||O-Ktigu~|Yl(kxc z|b-=mO57}o4=)Q&6<>Z<<Fr-@9+_R+M(_^gb>ovY2px%mh?^fx0&gL?P z?^$Z-ye|Vi9B0hoslR7$?-|B!RHMf7UWh5hGh0_Le<5b}yb!Y%zYt4?vw_FJ>*2Aw zUWnNd(zDnCs+WiFroFG*G-Frow;I>?wKi!M%u(4Gv_PGYM(T zl3foV1v{P==%BD;ahjcL(IQx34@tQ_(PkgTK2uvj%S{7)J9N`M_xp4nAC*-2?ICC@ zfi{n!Ei<8wTKgMu+MC3kc^fY#JACzb@8!8x>eHYH_7rQ;bXeoR^o1BJCp%=1?0z67 z&2mq#*6r9HH_j!S<1Tl_#^8GyDi;}XZ;g{=kY-N6%dYdS;4jhnZ)^C5f%cs9 z94c-Rp^U!Ja0aGhYkW6g#}_PSd?WF9NQSgo4fKT|i`=2G-1DIKJKVlG-Sk7aG*Zm8 z=o4Cg59)8;K4~e&cU<&_%tq}PzB5>_JyOdZ*1~k0(cP=r3ey6~d1Tq08l~`2VE%xN zh^Cwhj%j?<(Hy=9jzU*z&6vf*F3?MGqu-7jS|+RzI-_Ib_zKKI{P_k7!Oo}$rwXT< z;`;7ntZ^}JCz8#$BRX1(exgYio(htDnMThk__~npX3_ToT68W}G4$<_uaWBMSgotD zUjQ}m=0desOiIzBBQ(0VJ50l^y$f4)E%~|@xBhf$ERw@aC<*5J1ncjQ;hMseDHpv<35;p%r=x7#JsZ=QsgITz&4Y6!UYHq3S9`*iN8(itly^epP&~8NgxxPb9(y6V zHiX`VR#_2uWM{rk-$JCT>EQhWIXoHcj`KQvI7i1V46=c2Gwkre4*mWmEW!T$S(czq z={~wGha0(#{mv1-L{tmV^hjZ0mBWytYAWkyAM0@VG)l+}h-ppDBt=)t^^x+?^%sUnC zrS=%iPNb~*{8&1^o9V-n__c69{=Lfn$b#&1*1~WX5qHmuBT+xk+l3vSB&2n$%Zgs) z$&ekhNW&_8%Z+my=Gl_O3-SW=eLUUj*%nL2Cf9+CZLuWB941A~Qby_FItk~Mm}%Nk z%N!3gsd+47Y?NG_7^sYsYDWt3vwEs?~v zp?NyON?I=3!vnBwvu@j5bOl;;dY570;Vypz&zq|Ayj}c)@9Nml7;1U4Co9SB+E`4Q z#)dp@d=sVTuSVA~B9Xt>kpEue?>BfmoaQuO@sqHVEM$HPf{tf8wH z>`wN)dGbyP67~-un~6Jsvom;+)FBs9YI0~e>GQEXd@I>CG?DIjJ>64byM8w3N4gV( zJnuV%CL=dP_0X>qp-a1Vy~^`GM;Nuj9Nat{gEIMt-Ub7m<(C+3I*RY_{)}(nX)Z}$ z1o6B-AqL@O*0sH^%fH-Ntfx4+s|q;Pqjm1X33e^&({JHk0KErpH{7#l)i3&n&6qXI zE&dYulv33Fzb9N#b;*A@>qHEFPC5-1{&cqOYT%oTPkb_Wvo{jdv2SG)ZVgQQFXqzb^Qf`SqZ)=GS>;oAEVrlC-(PHEniPZX}J*E}vaBF=ExQRuK;ht+NCqPy2DRnHO->IUforQhHi?Gf^Uq}DX z2e~om^WtH~eD%z2yC`+~Q~jQ@KaG2#EHW#`+{qUuCpaejzXg}#%lb`|=}vt&bs}5^ zecf&`X!^em`c?H?guQs2FC2`0%kYH&(ovA+>b<;y@AlS~)n?SBl=rN$>pe5AtL$n= zcnR*c$HKBIm2UJh+##1^ykA>*YOOZpzSr+{CHv%Z?pXUe?cn()TXBD!G2GpFJ@%UQ zwI|>^n;tf7_?drmm#kbif8p?nb7qvxD7tp;#WRXVsw0NauefR0d}fl&l3BLMRyj#d zQj(Pv#irOysiq#LG*g<{Znj(O`gh*U!I%uta2EkzXy9uzqPH8giRk?XZ6-Qo&=#T@ z*X0Rt+SZ_HQn75IW2J9F#fpX4JX^YQ;qn!Z1q)X!oWEk>f@Byn)3@-Z z>YJ{2T-Pm2u^rbfSqABf1qc~7Y#60AY0jLPa}Z%>8O363?h2Se5m!_#boiDnxqey2 zjW?2iIVEz_{DlykRk3XOzv^DGBw>JK;j)V53muh=nCEL`rm zZrPF>9XBq#amlh<9Th7ao*D|9V_4=`TzwNvB?&#t!-jPm37M%k-CVJ_dVynp)k0`r z36Ui$Z(4v<&XSpRmf55?ktPiMX^NLEtJbrc$mSWHWOK>lCI6a7$099o3q=^qse8`WTrKwY=KKRi3haaB#_{>W#x#IE7Tefa{ z;x`kg&b;L5r=NLt*Y4-`JpaOrzuj9~x9_F;-~ImOhF4yFt?>`9?|w;75P^`#+iveSG+nPe1!SbmWVpUw-v<_}Dkco4@_;`yV1LCr-AW zIvtI*wRd!O#WgOQEJ;1=J$v=Z%pL$7oI}Qrzi`6scMv88h2t)`Y93?n;J?=ShJC@l zL}U1hh1qe|%#N`i*!S#P_7;1ay~n<0e`2ldG&{jMSR2#W-`OW@2iwV>X3shv=0~t8 zagw!TZW3hAu~*P3+Fj4HM)n$elI>xyvJLKs-5cGKJI`I=u5@4OzQjG>J==Ymd!GAh z_f>AYyO(>EyU?BOX72IsYuwkmuXJDRu6AGNE_cszFLqz=u5vGMFLYnwzT7>>J=cAM zdyzZSZF8@6-|4>Jz25D2*UF!>jq-kZr~IZ|&)$-skvGY^<(K3E&OgcZ@?d9$vz9G% zE^s8955IaYXF^jA*&T2TrCs!l6nV-+?d>S9d zZw2k=GgyhVim%4so%p+(--Ew({9b+^{vO~D@`w0(z5#z5`6K)^e~kZ{Z^GXN(iXmz zZ{rT>H+(z(cHr+R{5`{;#ouoJ9N)vA$KQ+mxA?2&b$lQG>hbq`{xbev;ji-7@b?EE z<@@;?{Ez%i{uX~5?j8Ov-240kxIe?vPdR4~^3Qlrev-?qg}34lpX6gJuqPiYC9#Et z!n{KUyG#5!o|{!(oND`` zzDimx?dEq%cS(0k_ed}DQi<|7NqRtfP$UN)P^5g|q!iKq=)Frh)o!@XP+3%`apF9^=~wT*+CE)ojl(n;m$2;EF-d z&atp7a^~b*m2+{N8g=W4IZ-3ze&V~-OPSmn6uu;G6oqjPJUb$q+ip5K=AGV@q z1-0kl3(%QTM|SO!#nm@1thsjiiW`eY`bKz)hAm&Va6XMcH&#^BNXl3Vn>BOp)XNzL z07v&PpMKq*AKz>3Km93ZehL0W{l|aiX9#%ppY$_73U`p{|4)A-IQ}0Nxc{d{h{Oc~ z0s(=5KtLcM5D*9m1Ox&C0fB%(Kp-Fx5C{ka1Ofs9fq+0jARrJB2nYlO0s;YnfIvVX zAP^7;2m}NI0s(=5KtLcM5D*9m1Ox&C0fB%(Kp-Fx5C{ka1Ofs9fq+0jARrJB2nYlO z0s;YnfIvVXAP^7;2m}NI0s(=5KtLcM5D*9m1Ox&C0fB%(Kp-Fx5C{ka1Ofs9fq+0j zARrJB2nYlO0s;YnfIvVXAP^7;2m}NI0s(=5KtLcM5D*9m1Ox&C0fB%(Kp-Fx5C{ka z1Ofs9fq+0jARrJB2nYlO0s;YnfIvVXAP^7;2m}NI0s(=5KtLcM5D*9m1Ox&C0fB%( zKp-Fx5C{ka1Ofs9fq+0jARrJB2nYlO0s;YnfIvVXAP^7;2m}NI0s(=5KtLcM5D*9m z1Ox&C0fB%(Kp-Fx_+N>D!Wk?150?LL53irZtgGNCo7c@?)&+12{|l%6Db@ZxsAr37VJ>H5CghDytbE0Mc~c&>75}Y?+ZH^;CNC-uxUnlV@=! z-+(|xPg3Fc;%)PxHuTULKRzUG9S$~LW9X$=Y7i!I^9b@umdX0dbb%4}ON7aasrsfB zkTlh$K*VZUP7xH#^$=06#Df>j;>=13^R0UFJb(Hb27AXuMtKpMFzPs>kWra%^jiui zy-ev1^MI5M`|u+BJ9tB<+>>bc$-3QGx_7GK6Q$1wB(2wp>i~ETXN}C1l8KqHWeiM9(4G zZkaj>GINRUWtl|s7ZaUn@m>u25~8!MM<~rpDJe(t3k1YvcZ2rxBmwm3BqYYH z&l3F@(VR&ilIPciWf}?E((xDwr|VB=X?;N3dm@-WMQoF7SD7{aPLO;ncSFY`GP7|O;F?+H#I%!TW959&Psjjo598|$r*S$!5zdh>Wh zV%DeN=Ud%qzlQ30y6V@#Jx5nPkLwvhE;5TK*0s9wBbHvbQ&Q!+ZyZAVR>IERFs|+nG zY}cXvZj$a>Y1hF`_*V4S^Y^_QVHY8Kf8C}ZDEAfc4$#qvkoS6X&Ksn^g*<-0KYV-6 zTa<|Iztiu(!|_Kl0g3+&NWe}xxs}68q~DLvkv6RC$LC5LRxrn3AVyg^VThf{j%00P zeM1P;Avgg-hv0NK#}26VASVbtXka(z;%?%)?w~~p4$Iw0M!rk=yBL}-$D426iR7J# zgaCpFBN21yh`mc8e6~vm>^-U>e2z=U%ka$2n~(mSe=rHLUPLU^22$W22VLakJa-T; za*E5{AMweV#;>^05h{p!BBp`ZPsEkoL^+5Lz)7tHA*}$gDGI4HjiYpm3&Eus z58p~QB#(sm?;u!OcTvf%G%9Lx%D}YW<3-MNS6VjWlQX;1J_d)JGANA(ZgQ4EY0#qo zECX39l2F+BBx02CD6>(*I!;an&9n8@K%C%4R|P3Mvac-z{|K9JVGtwF%U<9O2#e_1W(5E z-JCxrWSIRUq|2X@2#ott67T9@8~`)@gCTkd(d}?O^@j9}M1`M;d>O_+tH(T-{3{8Z zT@n@2V)EPY;JYQt?7igoQ%cY2{$1qP!PukwX?>8f3CUB9$=D8pP{`O1LeI(fAoQHX zLFhS=%n1&P#0bg*p$Fx6b4o!_baswH_21ry44S7K{0M?pBZP1LEtp1D=Sh^+ugI_0 zw|RP2W+7MUdXI38M6wO=XX-=7HM;4&Ea-nfC(Y%$Jiol}g5?-lD|G2;2<@wnHgO~S5qQ3 z9l-@CiGg||H=jwwrYAodN(}^UdLoaK@xOxjw;-UXA@%!` zsz;nt^{Gkf9_O;R5jVu$;Eo4(yq;nZDfYeyUNXDUFw-PcU&gX36KqOIrVbB%=sHsJ zM_tL6*6yiOC*t+Y#e=`asgAw@>sa=Ol*3=?qMIN(T~Du+%2*fm>!O(bWgS51C*V^$ zHd_U=B13!>vO`ltmi-3lnWyWy9FoPl9+FT0r4d5;j37y)F3r>Rj!uF}dLMKxr$VhD zzupIx>;4t+_x3>@HIq6caVnVJw`j$zk%x?NwuZ?u8)IJJQu$*@bWM(6ADW8v>@PS`NbC}q9N z>Y3opH+X04>g_>56H4WNBfuyrs%9%->KwgA%%z-VU6>Hmi<3(DXM|Y)g;c<9v~k$2 z=cxZc%4a732zfL(1Ad$%4d|ZaDtQBFzDUmGX4e8IMW4(k<~^^Xa?s2+Mtbqfg0cUf z<~=_<*`d0ZnCB#Bwm-W+VcJ1ewaE?XU8v%H@a9|J$J6{GyveZL{0fNPAef2fclxK+yaIyal?*QA+V45?Oynq#Pm^y$U}>>Tg5I zTlL=XAs@V3;7xiA!skLkGFDD#>d8h!hgEf??>f@A_KdziozZt4>3i*rzUxTer|??z z&i6VJjFb8Y5qILhs82>ea+1%Xi8-|#+qaY!QTi4k-`Y%BBky#|n(a9X9_K$}hK}Fe z@Lop2sniRQlLw|!2SiTJPo*A;oIE&{dK7ZECV6CDumQBBC-AkHi8gvCZ|fn{{RzAM{&@ zS~>`U!B>K0meWKJAzHCsI&nJV1w>n!Ov4v1Tn$eWBeIxMG08C#wt=V-aX&Ha$=#E! z@8L`711}NGb|J;_wE|XS=4GQL2w$)t3>(7v*3`>LV&;cn+maw8KNWaHX8~(@U_@CAu*F%B6;{Dk+=||{)v-Zg5`Ey{6g(mkyDiH~D5rU;a z->we@VS#NFzVT=!c(UwIDKvh@iMXtX$)4q`D~NiMRC|UlrZfXW^M&h%=%_i zw$?p`EL{u+-?{;@j4Z9AEcHS|FtW6cVqOYw*3)F)eN<-a$*Ti?KiU5xyuDt6s(FY> z8(Ne+^3iKQcyGc##o(FbfQq32!>M&6>-AwGaN)lMKEzT#L7-l4UnJD_`92}8193(V za?|e>vg?N15pFcr?Cxi%o@b3VZFxY`u`k*7iiUev=BbUZyPk&nFwQaq{xB zT@hvLznLCvN4k8P8`35j3m=E6i5Sx<4<>mE80K$?ar^Vg%M>t;34sL%A*d+G<0~K> zM7$4z4i_vT5a$wc48%kb%=`hVxTKXtbrpI{+I-L>pi{R#2R^gj4LNf1IxEfo$thP` zyQ_;S&w3p=5rvJx7?`Ldc92v@2tWG03eSH(JSJ+xzdgIcqJr_# zQLx;YCe|Yr(^zv8VI72h#??uBw`qd8X`u5SObEYyQ`SwGSetZPIj4#U@bZ2Dzgl-h72Wa&s58%kIn0d7 z1LNjL@RZEI!BaM`B#W8!9C?1Z5i%Am3K<_okxa-FbLbV6_cw;W)b5@jj-VtjyxY)! zv*dqJq!@L>nc(H&&9@Fh&QtUbxt#)fpmAd#7IyFh5Rx4xt|U@b(nN@xz<+350jSoTM*7>;sYZJ%~Smu%qu^fv2%F zPuB<0p0wS|AK4EP$^zeNqbkBH7lUC8KUafqxrCStCP6~laEnDBL9e3#lRTZq$J-$N z9=yHakcz>jgf`s5GS(vSBLs~2xxgI={2T#O&JJX0FD2M#ltDM8z8GS??*}n~*{J&Q z3#LQT0S4bnWso!n-s41IT-2vZN#!6Im0_P#$OJj%+dc{kKzHBir&)BOWydz1u@)u}b}|3lrIKu1-iZ{v0Q-tNBL>7=`}k#v%# zNkRw#AtYfHGztnT`=Y2QJIam_Kyd*T6;V+XS0W-RZm6i}Fv=({<1X%w3o5QN&bTm+ zy9od1d8=-xgZlgCJKs6qcmAByq2B$ix8AB-x9Z-y-3Fu)>ed9Es=+kKICUb5bZVY) zY6R9ze|z!q>C5XtFgiW)$857ZM409K6N&y`Y`dRB9`mrky@-adVU1uici=Z_JsF$t zzJW+`$Y7^ zXcX2}bS%PQMTg+8FS<4l4II6cm5QE;vOjt!cmmN_9L`2BMYP;#9qfjp*MmPC{Sj5p zioO8;NOUHs+0jaH=0uMNCK?@&ax8iV@bT#7$d26T!;sBWz8+BReD!wPAOFBr^ydrc zRMDTrp8z!YqNU)sm2U}9{=w716IgEfhdqlzkTXgD2o_b0BfWp*+bml#E;0K@jY4^u zr9$k6B*Y~NRA?&T&pmi4p824f(bocFyZ*aq&UGqiyAP@sh};Es-(LX-J3q(bvkb(1 z7IWVP)}3mxBj!25jYBax$R7x8!P_cWd=gC(yq#DTVxQ!;g*aiWEH`-5Qh>pWsO=Wo zP{Au$zN0J9xWc{-iP?{eFLFTHx`vU zex?f5QLz)84#m3c2E$<2v)FM1Fcl@a;RBs`Q`AC`DpdrMS8HQC{hM@(JtPJ(! zenYUC8PJ>BRq$78@1rfPW%)ps-QZ(r;!t0fBf)zSsZc+bW5H(;q0m7r=LdJvgM(Qv z3O+{X8(A(54x#KJET>ePPhiZoLPtJF%Woi;LPxQvf}dogJecKWvD2w(D1Al(V6LY^ zBM3N1fGhF;J7AKEv{i+5V7)jrrVXZQI$}q&sDf?j{4q4@1Z(Kz*fQYV;HfloYy-+G z5F2U=9RPqoqcY;u11O3(3{K(msE8X{I3B3r%M8>a7FBR8%Zo)n^wa`XcpK`O3SIjW z= z5J@B`vs7eai6_AvI@`J$;muDxL~)(bvGyj5~U2>4c3>q#t%w-090tb)O2*Bj9%Yp;Ra2OO?=1tY!C(G&_J&v zV%XS3E8Pyl$)N|jLta|x!IoC~6T|07D{W=bw9=n5TIr#TR(d$2m9~-Jw9=!}O2I5T z`ULYe6&#O&KJ?d7uvr;=h2^KuM7cV63xoFDjVN~xMp@9lvmr3hki&29y!y zm*{0*l#xs?(^g~fk!w( zbZ{1JeY6tgvB6K+BA;*o8yB2U{HNrfqDuK6T`psN%2<&yrbij^2q_~dJd0cN2xxeQ z3g@xpEP^O2nxTy-PusbkHU^-D2X<}+LWW#cPx`1&!ykGuM(gJmWc6 zfI%w6Y4Jh`N~MD;8Amzd5EF42jJ6ybq-lX*5F$<&pd$`1Ol{e_y=2%T#GB;rGhj&_ z#VFlkacE7w#vI+K%O|lqx9ajw498wP1qPmPSl;Igu-u8|xXsH#i20a@>a;^Q$A9Go zpoMQCM$e?IPJ>X6UIw&^_Q78(dMDc77o80UFmqW5XRO)^@MO7GeG~occraXQNhMP9;@LR?_-$`@Ytvd|y+`K}*3?fdvy~ z9Y;U>_7`E5syLB|ag_Jl*pE+Dd_yxQa@vFaKyuWg@vRAT$8TQ@4w)t?G>$aI!K$J! zVrEU=Eev2wRlY@gb@o(v@-ps|xcX%^UkHizr%_j(&GJL|Rmn|!gK)kDxC0&u>uz%z z=7Y|v2=4l<9zs0?aCIZ<(_uX3A68$RL*+~$JAMlbe=7!rwmuYpD~lPLu>B774Fat% za8@&+_G}7J7{Z$%+WvtS&L?Rv1|~dsLi*Q$p^&ara`n;r)<+eap)duU)!d&70&K)@ zeXM9dw4qk0IZp&!vkmNIti`XBHQZUK8rrMQPZ_Mn9E{t?%5xc)w|q3W9MsNYVl7RC z7|XZB#2HY@2)!eG4+5&LPDkVuA0rZno{r7Xpd)g?Cf4X!--RG`jw*KolEZ4g98B$H zaTOFW96?wfwm8;D+Ht5=dsz@U)^`oyRe-DBWLg~Wie1*Z?;^6|SW~0IV*~7sD%tS=?MGpskj~m>F9uE3; z7~FRr4*GDXDzYKeK)iQV4F+eym3cVW$Tzrd9u7824el@x2OHG}cdUnljlKpq+rz=e zaDzMB!-ZAnSq5jKh`b$zW{5b<%LA^1(^i!{E%Hr{a{B;hHM1>r3RFo7e1JyMO;|0B zR-O;I69zRr%t9@VfNSj$kgF|2Zd!k0*S!`qqmG-v{3X~rZbsop6lxws!A2K+U01+wmm=fPa}D}m9=eg} zj@yCG0e8)FC={a*gMQT0Z$IhcVqlH5x~UpW7er+Tk9M-Cd<*DGh;ZbG2sw8d&JiBx zJmLJzpilPDrwaNDgI?;Pn*|+-E4M53-t3_{YD=F{7Cf?>HY2@otL<_;d3HZ0zda8l zHXW~3HOGPJKxq2ZW73rxLE0?P7^giRO}jeZp!1MG5{DPWr?Y^*6hZGGXjvSsS#DSl z)U4bxt66DqBR%oAMEr7~cR_qwhWK>`x5UFC`!*QdDi4R6-eGVXJRCaGX5i@jgMyRY zx|#J5wFK!lB>mMdz@?xRZ|W$tFqifYqzQmdaZ}n?a%-;+uz`Cp4?z8V&9pPh7XdAfVX}UuB37H#i^q6SB<5QDCgW6?!QF0E@Opoj~Iu*!zvB9S#IHBv7)E*-@hu*w zPO>A7g6BQ7&eGvV!TUx*4^@L9N$h{;acTuqjDiR*q8a1h45Of}Mq52q=Xpj!OPEwQ z?mAnSx5rg_9xms#G9ehx>+&LiD^S~xSZj5!Kta`U-`YBxyyJkwNQ6s$S8kbFb2_Jm zIX9?X$s4G7T(15Y-LwYxCGI+?_>1Qv?{ARic(Mc!X6S2P=RsiNj8nWbvrV777(2Y1 z(Y^Q!A6D-@L6Oy`-rKs3l-KjwcK)p4^~a(Y@Mn#x{{r(Z{;Xm3Va!GNbH1zZ3JibN z$cFK_g7W7SSoNnsoImHMdOqjJU!;9~4y^L$d|%I}_4tca*7MOr{vy@&Yazm)HKN|z zxX-SvKOceOFXzJgmGFf>YiPr0@bTwFE%jAT{I9+P!E9Ci4dH|#^)lvN{P$0Ea6GZb zw@mG)LG$H7LOJ?@4x5`szQUov_zxmlZ?rl3ZBLu`kiNu8B$(GprlJ*mCB*pW5N+Q0 zvkvIAw09*3gdfwIT2taqU7qgmEFQ1-<0P}Vz8_9T||4wOBMWxWGs z&t_TgK-qIx);m!4T$c3?ls%7Sy#r;R!m{3hvgfm`ccAPAtW_=6xq;&TbC`dy1BIY- z2g>FSl-=|Ys5W}8bAirE(wq0M;DZ?9lUcA)GFSqZ%ZWv`@0y#r-m#IoLjvM;6r zy#r-m@(4_D0qB03;trI3^|L5q2g<(w1{&ZFl)WxV3$g=c-#}G*2g+X0vfhERZ=@={ z17&ZZ3B3bl-^8-sfwFI5S?@sE8>wFJK-rrZ1MWakpX@-{cXtFitFyhO2;EtG@qqSX zCUVq%keXt$-(~-a<$T%ivbVBa^9oZvTiDP7xVKu9pYEeJM8CK4g~9{_67Rx20x&8 zJ180oE+GF)7ol8;C3uio%whXRG`!Y>_bK}VDtxUYFi~qLc{V{zFSQ8 z-D0xu7SsD~b`Q*Z?XNb%ANy~plM`e8v};b@EV}j)s;6S}P+)B3hR!|KljfIWMvL$a@dC6T_uY*naZZBFg_c*{-6!fdS(2c-9fPgf4@izq-Va zMc$e8I-u%M&ifW<7LZns%?Y@FGPg(y23vnBI0J=3JQre=cYbZl_Hd z;$Q%`kh`naLj`9MU{!QCYxr=%!9W!+rEr%*YT`e>`Dit-!Xj9L z_PQ3*v<24^(`Mt{mfAv+$^n;@PMi;hhQbCg_*M@tgW2wdY_AJIEt~H_&jKo)vlwe? zg`Gk4tsYc{Wf~2z%4IV=XfPsGmS*(h(qFa+>y3ryL98nwEJO7wWJ(VqG{u8904iP3 z1dF{2*T6e_^=(Vb;99T3n*mkeI$Jt#lCpXiG6eSOoo6MXLT$!H>n>c`+TvOD)lZ() z7Bf*drP8FwTSzU)_gawq^MBJqYT*yUzR}-;EN?+l$r9B3FmfDWME))BqQ1a%di$tXRhW-E+`o0dv*7fExoEs}3S7sFkMpM+!6QkD7w z$h3o7m%>3GpA{+Y#eDohG8>>8BtB3&f#(0QfPOCYJorg^!&ROKdkS<58xMXhV8V$9 z_+J_vFZQ%}K;-Xu&~7cV(t5Pu)dQ5vF%c6#%=;2dq3s1MzD)CQ<}q=`!DO#=64Lfb zG3Q%7i~0RmslY*?B~=$)`&@{kHLQMk?-D3u+1C_li`QNjf`nJgXR(1;iDFLHtdk4a zMzav9k>bdwP*EOa=bbJTPVW=)*w_rQcNt-J+nExWy8)KrT!1-3e1Q<$o-1zuix4>H zilV)MO0kkZuYe|etEZImMd?#ajV7d4!G%7kHd+r$bxhmUQ{cAM&1*IpV)#s!B$TC! zyRsSo9p~kQ|MGGDv6{J6US3N7zln1ksVf0|I640#@JPUA^QXd*??rMd;L<5G@E-OL z@gyz^zSRQ&qDC6DS6{QVlp7E~#yRfWtJf?omErHFI4#+$_ncM6i?a1ooR{LysC^1r z>gPCz6sMGR#s%5>C64D>!MTzjwp+a!K$7k8`rQ5!v~!J-SePwd?-f7#YmH~4i{L?EdWaiwy0Orx`=Jg`v!^MV zdq@KwRcOJ9{V+S3G(UqV&EH1DPQ<`js`wT*@)hZHm?i0Oeh!-d1opNy(){IU5#9V( z3+Ewhp((gNTqCV-uim1Y`&!f7o0sb5y-u2U2c^-PYvc6j3qn&CAd8!&wf6};d6oy) zqdm*!wZJD4Zkp|pF9)cT<9d@EH!qcTVIKSw6_X}yX2Wq@-7gRJc??^Y>cI8tiY|>C z8IjsTDJ*Y_zGSUZy<1W6Iw;lE>gIh4As0rr$2iR>qlLU8DwGh~_zXiijcsVvLV>(n znWnGJq~k(I3kPb&+admE3Xgpy_U^ zMKXvMhC(jyOR}VEL!Y@p#k~7HpP9^uX*!#|#nVYfsHyOG96iIBV1d50O}>2Z!-;;fxXk?&w>_^<4#eYLN92AZr>soYI91R@Dkkk|un2l@_jzt^_m?l6KbHU8= zrMvIl61`lOT1J)J2S2XYLw}wypV&0;KERwoY>A=4RXs9+m+1#$yn@XHRLYxU>%kcB zOEK-1fH0xXgl8>Hw|bmzx^%p*_Q-=7ktP#-4(NOwfH<#TpNyzIYPi7%caW_TNm(4l z1clX#IIL^&LOQ-e!Y~$zI~o+L`BKbXbU-hZfL;l=6VvA4GQKiK+7?zydf6o+`6{c$ zZnY}rUFD_QTpH8Y<*iGTGfcOc0&(d!GKlJHCevcM={2WnI(toOJ#a5$1Zas0u5ECf zH^9Y<*uJ&tOc*DQFUGB8VhY0DEyiNJ-1ECm{O$@^``ujxhX9s_?_nB#mcC^46u*6| zCrI>};04h3+XQDP?UG6H5}f^d;O`Mwor#$QZlt8(ySnm#3=8bD5r?rXK9`voP1h6i zJT%a|P$Bh1=pD%I>u;+3-q~+2BQ$DUU^7-MC10 z4jUOM&k>ZnRoY*D@!<$66=8VO6)~~$p*CC;wW`IbPcTErgNTULZgf?dQ+JGVl)DZ7 zB<6C`Srg>~%~ODNP8^^Gz1nm!wV9$jf7d8`%`gnUWs@dDTEi~`uAG(wI~x9q@M#WNLSx5xMm@l$Sx_ zB;#SB=!swqU5KOT>ju|kM$%Lb2zSY#fWZVva|a`XELV}OIXO&l424vMZ!2Y zhhbcSis`V;7sic%B?%Vf=p<-LJ_T7y9fhB1#?)IT6d7S?Lc{fE8YV?i3LMR1kvCXk zv8`BqCvCA@7=QFERv3%3WcpW`a~`BSSHV5Gb!eZ%fp;|EWM^ZXn^YMN;A%A#6o%;+ zq3DS4f>SX81dg%Evrynvst8WWB?-6{z;W``S#Y@em8#_B2FD97Z7j^3<}`!&0|X{{ z#9XLCb64C30PdwKkivuj-63sEodgygr+x^8hC%HQ~l+ zT{f>d&j}3hhU_jN{{x_IstuwyfKf}D>ZWYnRHJo<-<-|JodT-9ylMDe!uQjwTSPg> zyt2udmTS;Pc2vHGQNq9n67GjES{t()V0(IKl0!C}%uD4DC{)NB*>!md-I(n_yL-Za3SX#4Z>(=Zg zt$8D;x-~WYDB(^>KdW~(N53{TfTs}dBgSd~OY3TI5XsWI8eT{^fMMA>Fq_@#7Qo3J zs2N+gH|o{8b@zh8QEW(>qLS5}bX%P)I5YU@wmKXn2LJ2~5_@5C5(td?jTwZIY%o17 zOrCFaK5Xo?H1g}9u#sOfl!ds0>^0ib?Q1m2nLx$ddb7@numkq$sN6H8$?nC?r!?8Q z5q7{QP;GrhTpr;S@n^#4A_UfXk%Q3g4V}C;S|N%~04(#P3nRRyr|*MTM%V#)|0&BF z7f09uU!ySR*&6(wvU2@g716UP+{liDXS{%J!HNh%Zm-U~k>$-=@>Fo}8v3lq!F#Z0 zfaFE=V~xbzL&rcRUj>D8#2*ahR19Uif#Ypl1eF&fR8fQ`<(QWeq&ypvEH}7@3|tT3 zXlkey&M%*=??*8g|G`GtGOdhb!8D+FFR@-rFnsh|?p8rhHG$4Sn#e`$cHFtN zMoH**ReOg9F+~%+?vIwJ=fefvhGV1+>j5X`&chP<(b9&811_6P{$qvzB*Kg4qFs)Q zASh}HVVMITFNW?0T*?LYaiR`K2_?UUZLUQPhGljP9z0o%pt9u%pD7-D(;ijDi=|a7 z+P1av4s#=OVhYy;yG1xWJO(>bjk*Z$Wqza^GTrJP;dHArrjgpM9-?S6;EIo+Z7W(= zRUJtaqqCUZJByGZNI$Fj(NsDVSuC%DOkzH(esmUX+yhvr_c2*a?>)NaM14!0=^+%Q-ThkaZsD?+`BFprYX_G1osJK;lUdk$%EMJ_ckjgM7i3mQy@=_t3f!zsNAOC3@K?@5!|VYhHrzp)WH+%on}KAMM|sH4 zFnT_2kmBVz7W!0-{`?wdhna!yI#T@M2(AaIym&B31fkk#Y+8KKy*9}cEAjh zx$Ki%K7o*QLtDDx%bZ_U9ZfU0ggF45U!~lYV&>X%RGYWW8^gTe`xTtp>aAg#>4w_s zG35>sJb~~WbfG)L91d0!lp$zSm_yJ#fMrH?t<`D&>wpU~c(aV;J2JLL4b3^Z@6aG`NA_ zf;9L7!6|8QDw>~*K)XT==XHRRgKp-CzyWd(Rmg;w;SmeRXByei%e0@WeletUvZwHU6q+ggCSbPDBHDi^tkka0;- zLe^PA#^Fsb_Z$%7a?jU*S@T+{c}XuoSnJWym4t9N&`owEUm%3|)l2-!djpdA)l2-2 z(lGXf8-(5jIN29oFc9WNJ(M+%W?$s`I?eouz-THxNrea^F5hg@#N@l;<>yatq|YGfN;7-Fywmv-6IUb*i` zm*8!#G~hsKz_Soaol-{%V>3g`S;SGg0mrfr43?p{4hmk!tNzkau*16_=^1rUxC1S-)aaPB9a&*8I*?&j?K~l+*RGN{*%VB zr4Ll8`5+vMTMM=l7**AhHi*K{L3XT9QaF57qCj;Lg8NZ*QTbhov*v#RKYg0%KX z(*ZZYt@L$-W8DN07!D$lp{nZo0+|0kz+NyESJP6d4Kq6-i$XsHxHfSC$lB`9!uc1% z=u5u@IKuy(!tLTzv@LL3Ax>!)C4WU`CFGdczXaIjk_Q8pV`3i>rF{uYr+YL&-V=mA z^%OjOAZkwsT*`~*6M^SJ_N_jdVR=Fv_!Kk_v`-3Wsu2(dS`D2`Xfas-8khq|o*=jY zlia5Q=K=f>U}`IzWarW260^%iWh)tjg0_`yl)7`~Z{j<^t@ENgbHibI<!s9T*@|!o4g6uZVr`Dp9kgI&0*r^y|fKCM~a*85rUf<>M+2# zIZE6dL6B~05Su3|iMv#B={e)(sR@-l$l$)vxYlt!Rh4620*-fj!aq32_E?1ecbtc7 z*N63}3!H)4VsJ&eaGoX;=K278{9j>MSD`_w@G;@ZxM%JzS;~_MldB-i7C+foXp$CR zi2Pk|D74#@k2c1ukBw;Bs{0CID|c1_R-6sV4_v83=#yb0Ay}ZRK)N{?QLzY6FeQ zK=_LYZYPY9WRFn41tb@XU;X-OpWFb&9PnpCt<)BOIrT|y1%bAfw<2^?sV713MmV&I zs@lM&*euqX+G6f&u{o$y+`L!Z3?2?QuVNRu4~OJpMh&=B_C6l)pT~NQ(JQ|i`VdsP zGk#Fqymp|j!&a%op8!?h?ornBl0JCDWm~QUX#a6H1{@y`=wop3GT9k8UgwYVaCopm zU+wjZUjyh|o@?^xi~|;SRPsop4QuRT0oqct3^y(6r7MnURgbcQOLZhlz0O7NBofOc z5+A~Sz3X$f)cm+XsNCcQOK{%5z}EuSvC#0JNaywaJc&j55pd~!DCcTsJE(4Pfr+~p z6jp;+{Uimjs_H~K78U(Y%j-!^K8KIOj-E?K0r{m z-8Huce6n=3!)KW9f zLPq*R`&8<6LvNw!6;{Zqs<%1+{foo?@;&&@l3G%muH_>RYxyYL(zSe4cAu@I06$#_ z$?XCk1z1<(3DI;J;W?+`*7ixEKLuE-^;g-pwnirt$VFPY$M~G~Hd$-3^jSmE^<)C! znFWzyJ!Fn0X(UfbR6WmX6pQgnoCuI3{fTjtF(x5qf2P;cRwd%q34=jiG!czaD)3Ig z*d0_>TiFCSdk8?>_N5$76h0&*E!9q}%ovKukAo?8>$xyQuaGy%W`jF71Gm%QuFk;i z295*iHjT?}Qr#-Ud#wb{53gW9les#UQ^df_8G=Q?@&4))gF`c>DuLS$WjZuy)(SSx zi#CUe+pwhaf;20WTsP|uo6Y(*>YxMil5j2_hC1@<`Krxf@dbj6hXyN#1C(&RCfpMU zvy;7Ub6mUzVDcT1%bmrgQboA~@7eAWT@i!km6tg60X z?AF-q5~Fd;ak0dX-iqXvBAGJ+m6vq5Mi@H-PL2aN$I!E2#k53n9&n$*#j6CTM^9cV zRsqkk^+CfcBVxvrW7mPs^mtX%xfq3{u(QV8fesHETl?!wS$|~Y$ccxjSZ9gox@b5bMgdFRdE}{W}#Gh02aaE z1O`RcSz@zDVlxJ@D1Q;rvldHKuTIBmi3mQ=SdE4>4bdwtv*UI%e~ccS4(3CriB?)9;U?gGpQ@$d8ThA3+k zAoNEKbp%uj!}p5~Ym{o&J|8A;_XS`sEarH((Lrv8ZufC>!ogbk4IQM5->#)bXlu8N zwb9fMYj^lKAYKMYwOhq#uk(G2_x*B3C-YKQVV&r_A8fh`>!eDr6P7Bh6Q$o7r8kJu zPH0zFVZBu7Xtr{@?-;4Ge7j%*6+pVNTO{Uji}frKIvZ?y96!s)0q+?Rn@O?7zPBLe ziWmn9Ew)(1^2T^#i+$t3(Fj;oje!kotmt_hqJ<*LVM&XQ6~`ulwG1aATE_|FxgvQp zc&(wLYAYmlh?!hka;Qi?;z5?kOzP_Du+xDk5q2fr^F1l#tCNJV4Q7_ z%k|0DM8Lsguyw#|*K|=Zf#94pxQ5{5*~n#0_K$^mahTf0;UDp#Pm~2o1A;sOrwpQ; z?XYe+Yz8Y&^vB?OFW{_Z?RLIkyFhJJ?!F5wc2{de1TGW_?QEJPt(CW*bY#MVM@c;PH&cRl7 zA;VHrgnHHRx``v~VA1NtvK9Q2_|7c*f?u`$r1mKSymLC|4z+VRP5DbJ-%;nr}SV+~Mv=~Nh+Z}8um}vyh ziqyi}Mfgn!$2Wj{GTKu`7LxyZrwIr&ACiLK2GRW23;z$~Uj{P2N|b{YzE)Nv+bKWA zDFU7Ylhw>G`)TI>7eonJXsd(ZoiOX+lN#G?7(rZ-zq6KPAmyZ?h3sgFokS zke5p%qGphb_$c<2Z!qw>CR@{DPx&ZzAI%(X+{~SU!VQqS6a<(Po0IH&T6Cc7o)QYItT2pa~E}9;hTs0qJ(De2Az3wDAN_9 z6Fb?FreaX$`v#?Bc66F)ewt|+nI`)Bf=OS7E>3$lQJBKVAy5NAHkIP7W26_Q4)v7+ zof7-^rd1!BRy~Gj4OCM`5y=Q4#YhEj1i2#kAh_PCn!8X(m%bzUKF+ilM`r(pw$Rlx6{_+))yFzF*L&# zUC0|rj~|y$(%?^i1DV!ayTB9?rh-YtOcI8Rp|Mi1f2W&^<3i!6G#hSaKU9&1Zz3$G zB~7--`!~Rayz!qZioRp5Hb5Ic425xoDk3{*Xo$51{XjQM-+&j3ArgzW7^w9JUx!$y zL81|G&Ni^W2`$J)KFkm`+tsS*oDkGKqk1U!6YwHkz*H>h@(cqz5yJZIv}YLk+!NqY zA(+`{|wKjTlKa0?6AZgo#aA@_9@m>%tP zZMmhCv(w<y83epfpKL#pPoPe1!dmR5KeiS z_u+tGMH!Eq=g+@FZAD%1nF>sf&19@i0&NO!m!YEkH?!04UEzI)z?`q^KrqOGbpNXl za<@Lu-}eE+slUSA`dS{i01AJ55co;Jnr~nE)}vS0ZLuT7eTD%T#j+EUGr`xP7;yEO;4HhYlMUk0 zEQeivCirHQBd$IZoaLCS&je>V-*vLUKbz$uSDy*aa;dA&1ZO$r>NCMvu5|U8;4D|W z`b=<^v1dM=XM(dnlr&E8^M|2{9soIt02w_`E-|5?m||= zaYwU4E2%Ny@(mN`B9?=$J`PvL)aCOFS@4Dw9y`)GhGj?Oxs z{ExL9hVllgiiPx<;4H^oeI__n<-7V!aGEG``2>t}6U(J8Ur=;zVL9dMGr_68GNjK0 zXAG+02KD9WGr{|U94xY&XA02ub;zHk3EZet?Q^=OJQ%@wp5=hcgAtq;sKRx5FoLs# zq9K2P4GgV1&3Fj1ZTD5#n+%LVPANJv%N3BgExkgt#1x z5SN1y;&L!T+#E>Gqh|cQ*-dHZ-Hg8SYEF;Gbd10Ug!Z#XytwJ)QX+YQCw zj=(Ai=J9Q0xBE9h=S!VJL0=b+m0dYR6^uG;w6auTY3Nnw3t-!f8j16FoiD+yiataf zLT@;tyv+a*-V}mU#BW=L{w9P#8-Cm>^p;TEqVGs~TPWc+{Jd4@9ic>u_L1_gP;x-2 z!-&MEmVpOw@y&eb%>!0CYb`XR*HD3g=Ww3~H<&+M|ex zMxrC3ACn@3qX$!^a_G)7YjaQK4hE0a{2pj!o2h!4#qtv;Vrl0|kjKEgD}m69aa;zo zsX--Q2a)yIq=_DSC(yHie!`$5YJh6Q_8`#wRtMDJ-Atgk9^@`V_Q=>=Du?{cwAO&l zTyAhxEjyNe&$PzC#Sh_7>NaDOTC^LgbZrbg1Fhj84Uno_56O1Vvnoeg3xO#akF~T3 zATNjg9L6nN%Nu zY}hoXL@tH);&yZ&Y$eHINA0bDksHjoR-qZP^;xWP29aa62ksMGy!#4`Ezy1(>lMIh zuec(t-gRd3TaY(`aGx<9;UeRZYhr!=IC9b!a&`sfvd> z@fTiVRZT(o`3s+Kb@0A_lvP>9_fYx6_oq9woYhoa4o?26xQWQ0<5+4sQr1yl64IX@ z*#Hh+ySE}g`0oUaP2OkJvr16z)Du|mVihDiH_P0m^lxo$Ifoa>(g1znHjb>wo~Q((Zkfo0ciV0k^ukFr;jnclzt`3n8o=@<`aCFf2!=uDE|v$oYsr7NjiF<>doj!Rl%YI9g_}X9 zYgx~ukfr>rd6+Vvct}eHUPswagi!W+6k7$pB83Q{aF0V2Ik?E7EE{xoAKKgeDs)CT z);l|7yE>a=y}vu7pM&Gj&;~)@iI9oPSRd14eY`Sop8XE6x%`TG-~#(GFsi&GkXwNj z0yuex6SzR~ zpE?GB@pSe^l*66Cufj)xi2I>yDKPgE;PWTJriG(m@eea;Wb>OS7Yt#&7Wo(-F1Pfg z7#Acl$_o?ERV=)lOcQ;~i|h%2Z`53by8vz@9c!{E83tJ8uOLHvQPTt%2bx1o!D2WA zthQBnC6%_9{5mtOq=QiZ1i0u#a%(s`5pXtjYPb*Kcnf_VV0`O_3fUZ91^JP;0x|Qk z#WZFGpCi)_VL}O>?MYW~ha~=o&{ZH6)UY)|TYlN1-@Zxsliz`+H;WR?$e`q43@-&+ zHI`*-cmbObJk6w!&=I;%RP>~ZVu!sZ|1gT&D2gBjMW?0}-Dnv_O|18gMv={_?tWd&qjEIe8C=#9MP@@E&temk~%~zyZ8-?{W zuD8ekcfTmw%Sd(G&*md(McqWv`@;GeWsCQ-8HAVGy<%bAm$q5l%4Uhk z^_~nz^Yf`FoRJEhp`_puwrkj88A(^{uv3>TC+l5B2;w@a;xrY;q+yF_Y4 z*%_?OJxsbOuvFHEDg|6c@CC+Kz{C{XYRsF9wM+qr11yuivYE0k5L`#g0)7url^n{5 z-+&T24NA>>;R#SmorbI0=KxYX{5&OZO0@IvX&h$JC67?!ERtTp&uXS%xzuGA>(XOt zhQdBUt*}8WOdA@RiLY&OV1~i>+K>O7One6abq3$KAOC%s_zZro@uD(VuiQ`IlU9Tb ziC;a!{w8=vo2U{(h6KNyD1>GE*%;J{kRdTi6Y!{>rA0CW?_m-8ip|Ii{@iUo^&EsS z3&BFQnT5GYJX$egY7d z*?5+ojYq~KJea0`07B$Zq?9SAr!D;UY^!NY#7tY_AQ-NQZv?q`ZnX-Zn?fF|$Y%T( zi1@gfoXwf`KTycw^u33(4QwiEX4(Xt95d4<;6}|%n?NLLX4(W|Q8UvfkRLTOZ30D6 zGt(we8Z|R*0;wD`(3Vsl{Ye&-b^#Sk!HGx=C%t{DYRM5Stu8E(O7!D5?*P|+qKXLRlqU9 zx-mnjkwVWf!Z$h;dNM6^V_GOcccwWzaZ%EiuzhMQO%tKLX`yLppi7TS|~*Ct25mDfI|5df~9-&(?Zp0p>Yf;W33cBg4H|#ZBY0I?O$xOYz^0q zxyq)BO;AxRcXb**9;-FQa#yF}y9oD7K}^G6b2X>bVQ(t9nWoMZQ+j$lm!_ok&a}PO zn?cKSg-IvfRbVQbPmOcMg9B$kW5J6=oS32O;j}J1&1Qj!Oz200{e-C+LRK^H91AzI zz53a!i2>7v1oy%}uXFG-Rz-i)SXOx)3>M4fUWo%|iUZqH5PM6+bY-}8S$I0Vf6GTP z>fTKd7ZLo^ZGQ@NOUK(LbNySPOGjXvPrOE!l~+J$O@>3aQD_+*S|gf2OgnUyz`mK# zU+_f=3`;V^K1ho#5w^}?)Acw*;2|RRVmZVnWQY|8VeL9PK0(+Pr^O}-d=16Q-lDam zqz(Wv+yQJZ7)Y^(3}ut4tdu4iMELQvvK|6|EIxe5x~;aTNXK#o#B^9zmDw;=TLW>adfa2GdckHrw7NYA)1t>mO6|53x_5Yhq3Wv)eGY_)FewU z4Hie$Cjg@khy${g$JnRzgEy$9#u-=@JP4GPBewd2W;JgEcVRwV&oSXpGZ-9_x<}fT9iIA@y0vM8|mr(1ammmm{%D@Vztxr~4x?zRQxfP;HuXkMJ z&_y5CVd}8fC=@4$yH9~jgc8W+GTtg7xH;T>3S26LaP|NYE)zl|XCDcxg^-hTbbA1o z3niAry{EtxLdneuR03Edl>8j-Jq4~5N@33D$jZP~LMh7O7DeD{p(JwpP}?;^Da|RS zf@_76%vpgp4_qgdRLQRiRnoY%jroFcY>q2ZryI`8w;1+28K_?#=)N3Q$iV2EcapAiSbA%w;#)a*f8=p zvh2oQWw}4g;n;4L2eKTAtz&rz%Q>+tDLb5H*uRy)h|_65<{mTH2J$o7IgWG{TR}Nl z1@guIjTpHTh<9RFvOJmPKyzaa?3m2QOs{t>xsq6>9_*yY@t?*E)>SzA~4F7e(&uT7nFe4Oo z{X|{;Y`~&WU&zh}oG%l&gGKUI!eXFN47^Hs9^KLK9>Pb`Aq{t$12ge!X}VHsfx!f3 zN5ZVGMWt7Z(<_9BULQ%J!mlZ`*T=qhejh9cis0I`zk7YG{!FmuiYQ=mjL_aHn{u~^ z^_%I=PJ{rX9)4Eyj%Zw{h2~^C!Oc|++WjKeX)aLl#Y9}~n}NEPioJzUqJwm`=cdeQu9ndS z54gvVp~wYNvxtaXmlnCeh^YAcG`m=su;h*Ezm#TLY?$)cMZm-APZVbwsrdvE($4q- zo--%3a^{4zGo{pVn23~%o$hIo!#t7mG>;eNQwY|J*(s zq{24=Y-k3sU6Iya;c0(S^BC>%MuH)62zS{Kc{42%G9r2JXda5(1UtDBU_E?e!7aXs zvHJ*vmX|ucF%s%F`N*PkUibS*uHWyaReWUe3Sf=YedQBbgW3zK?kgIun+LV=I~ju~ z#DtDCx5c%ICyWX0)e~AJn*Ditb*D8Tohf{XQj6T#O61P8$OMY45-WNfd6FWXG?rz~ zgd7fI@%!n}d|}mL`A!paf1%`udJm(kgZpVfRLdUuhGChsyhGf=@IvGFcV z+zwFB6W?RJ|3PprH3*n{3c%sCB49s)Ti7}RE&!O2wd(gdU_Jn_MD8U%;H3m7FBE4} z(=HNy^YyG)U5`mg8Rj{wN5j`EscYSjxbYb*zV3prN%3`^Zpfrmah=p~g!Xei{Tv5% zs!cYdvKS?NUKyok>ef|VOz{iAB=f7=flq3?Sow*S$wFM3(yKMatRX!B?8r2wF++xw zS*p93U2eIE=u96Dfk8d;#0+0xIU@l zpu)`Hp6jS*aE%P4*epF_29|)x|IuYG3uuCXK zQJKwsD3k=A*~Xkb@R8FS72xvJAap0QJjK4`El;uREl;uREl;uREl;tWo|*9>fmqC~ zyP5iK=>Ula((&Lc%e~pLocQrIDEDPK5bsL-!7RJ+C{oWooaJ!*yK0n=U>P%`rw9xl zMcuAD@*mVaiM(S-SMep(H!B0`_jO6#a>ZxLGU49uZo@ zp!Ud!(93C|9!5wvU5|8xzGX!!L_}wmKj_)1@a*iZ5*~H~e1ZwtJBM}x8FqT5g#xYY z1k!eJf~T_nBmG?4nVlB-k7WiC9u^E9+Brzh6$S}qmL3VGVQcrg;e zE*1svqQkNVTPqIk0IYJGsiatx=+>#Fl4-P8jPu-#Jzm<1|HBO03?cQ5n0pP>gbeYU z+4ejwC?SHIDOUxsM9kgC@XaLn1mhuK|I+|IMTPg1dK$qSI|AH7@E(E^%LfSl2(Yw( zjy}k1Ha^CHO$4CBn16E4I}XmJ=u^C$=HFLOm}N`}l`9_8TuWu9(L$&mTbqcj>B z2@ickct|OT{e90_BX@lGheSLCdZKvCQCv?An-@|%ZN`Q1P}MpgC| z_!E?uUG2ObD7*6UKvzB<=*q_f-LLY%=jx9KI@iE^yZ9z5(~r41e00|7P4f;PmUV`S zLH(4h!zW(-mAgQ+e$ zB;LKqVWoXC@5aklr07|^dx=m2ocFt{grFz!?xjKqbKdV>CImf)cUKD`C(0FB_i~}= zIlOy?P;#SOk#*MyMbF{gD}_=R{k#H{tAwKG@b1+@Nkq9K>s}+2(kNGC-D`!CjB-WR zy-p~pC|6|NwL&RZF|NqE&CV`VN2gBcz+VvnSDu!0w|YX69NBP)FNzuQy&xCK0ZxbdU`O41E-nFyL$Fhkjmt@A6oz4-{2H94cyOq9 zDTe-9RniCe9vFD|{s{1R6@Y|BRq~7xXlDqaON_+pAT;2vp}R-er%HAjEkpO$@(;s2 zDT6t3sCH$E#-&|J08dx=R9U7gi6tORU?r9t$u0XyUT!2`G?GnTB{mp=PmMqyQ-{q) zVDJ6{j~D^&;L-=zlXw9H)|#)Ul7K^?N_HFO0Upi^(H_G*)+6jwWk@8c9fid|pWBEl zl+%`paW)uJWyq|kD&VOVR<5*vB{FFf$X4?b%>Q&IvF(yK1_i$ z{=W%df@_&o=wp^f&qMg;LmhMATkV#01fqe1SyagxAS}csCaX^PHjhTfmb#tS>Eg zq~?S15p(=+HIH_^>VIW1UMHeDy82&R%>9oEOZ9hK%>6d!d)5Cp&Jo7mCE$|Rp^nx6 z(s+8PD%k~;WIyz$eZ<7br%Jvt+$l}6`od3in8f$MOT`1G7JUuFA*w7ND5`6%N)_

$70xxNy5b zr5CW{&&If*;o}K6o#uga02a@kjH6v{x2Oo8*=cuI4bpl~G8 zrWCUs)B>+&MXW~D95IO@fk0&h8#Gn2fiYPIJY$l$9EC0DC5d$?91T4sn~cbGBhpKh z-C?Pct%kx^t|b$0HxYi^liguBZZ;f}mbCY#$MK2bc-m+;uCn<+VSjzs)4oq73K4s8 zs?xOWK95M#b|ZGP5}iGsUWTU~>Pz?1Bf%gLWc)J(j0A}$;BJC7CB2y;lHP2q@;}!g z(x*r};cQrw&g^UYIxt@-JJ1GgCeA+zn|snG*(-GWE)wb?gygEA;Y$D~BK=IrV<^Z7 zUycGTziRw)d+KRTw^YRX_k8K@~3K2&0?!Iexgg(-%JaFv~7aMJAi@KEYeoe-s=@_ySc(8fsz zVNcSXe3->C?oQOZ@Hlb~m$>`@xZO83fJX^jbRpuzqt-@CpYH@P@lR;Gg_n*Wjmdu* zH!$KPa8|nnCJ{4*l2TKMn@-G8zTDv2x8TaE4K7`Q$LU6Asles1G*l|UX3-TmKt`#F z@TiS^$EJ&Tcs1a5QlV~AffoT+NY|{BG_a0IG((xB>_+4Noh@D@aAvS3K8eCU7<SLxoG;G)i{2C@I@%aOtY><$0?_s`4^2wzE`4M!cN>IXLj+o?zc^aQFyR zrr8ipSw1LK zmgZ+VcbGtf%Wnql8S!EqywhHsZ@kEVg^pfurua0rWHVSFfSPl)0gKlLXexOK_{V_1 zUgNn?VJL5b@**gIGA`+f)R_qFE>M_2ue73Ya`Us1`By6nWnzdewfW&FtJ0!vFenU4 zTSI9H%4kp+l-{i<>|EnOVNgb9Qc#`51P~Yt)ghk|8e0m7Fmxfg*qL-pj?*!jRfW@y zkM9d&9rLBLsno4Tr8uZB#e+<(9?K;00}>^}jnKQTC>#>TfxDdDPP&Isqg}=}=tJ8tFAL1{ovSuo7{`d<` zwQ3%#z~_7L3qNhu@F@`f!mn60d|ZIP@H18o_rUoJKVj8yYnQ+9qgKu0Dy8@fzi8F) zVORbl5BO^Mv@Cy-2YofmVTZpERw1voajU5APT{Y98E`#X1HD0Q58)5~%^!xYqStEh zAMgI~&=}WY%(MC4tH$OX!V-yp`kW@^OcRtW?3j0t%@b%g-!rs3 zp>oRR0*pPZo~(KSMqWmCiZC6}&#pPOm!s(1gFo^%pnpeTHp=ogV4yqEt_;+{pl>&T z)=#cg2G6r+!N~~Ug$-U{KLiey&39pgD+F+|`7UhmLIKB6t@z zc(Ii8v-vJ;@Dc%vB77G%xJrQ1Y`zN{yi|ac%Hg}P!E0oo39@P4-z01;p+#%g9WHmIeh&f zc%(B1-o&p(C$WyI#XaW=cxg2sj^xjkhe(GUhnnCS(p-6F)Ijs{?%>cgl!-h7BTxSN z0m?lcG6g(XVK|NnDBw^q2lJT&czasU^xg^{j3m%b&Nhz#`~tSyJdVQo#5{$U#3r*;BhNnmc#?q=oZO>N;TRqN%gy&YL}TPE*%m^QO)@bnxh| zqcNSH+62<#^yxaI;v!>6Uda4G8cdM-*KYIScsiT?}PMJQp z>!EY!QfSh`lhnYWV^W8VO4W6#>)EAut-?7NajSh!UY4Cxk~5}F+=?L(zDkvqbr4WU z4pT(coG$9%Vmqf#)`3|aisM#ppt0!cL$R`|eosT8(ws+d*|tTU(_IncZ_ygav$C?N z(*i!2jWu2ZN96U&Vh*RZ5DbCU@3Dq6Xy~I^8Ik}amUToPHD0kjyuV47DJN2(qSynHpQ^ zYm=b>`ifc03M}M=Se-6luu{J2P8w zEU6?PGS2^pRSaa?4S)LwfT6>w9^Q|e8^_f!X zo`&@QKWex?NXGrfhCoYnn2M$?nR{4(&g>Z>FG`r;WyGi@5C1UZv;V7V{869!Uk|&P z`PVwL*nPYjp+AH(UED7YSuJshq?;pictW0Lif1&_|GlfoANGK7>mHERx(9ee1k$&Z z{jH^{Ie$26Mq4LC%*yi`GZy~{XfdSKj=j1)~6%;kLWGo#W`I1S{nMVocN<5IKzpIIwPS2e;Ax# zh7H|^7J2U3nvX6o@j z_Vo;n$ec)8V`hJ6%VxLk1UaqqI|^%Nb`#4;=eXDCxeSaRe_CB{ctH|5n#lJuzQD`) z!v89sf6!jPZ}ER?gwmJr{pPvp$t&l%|HFXm)h6s+>$5T^$q_F!*+>U7Qec|Wy5XZ< z!^bjAVb&1$0+efV3Bwt#?rkzA;rT5R7-DD))7aLt=QaYSt5c+>NX2O;zYHx#4=ix@ zUINfu?+KO`Se#^%vCJ=X@njx?(ic;$wj_~|GARZPoKIqYiaRNV4^nu+)7Xj@1SfBm ze>lLmH<<{1yf#<0s3+I~V8(=`I?EaZY{!<~P?MQ*oidWOvq!)o`{{1*+m6+R8dg=FnVDere00DVHYva?+d}Zf?p=Q%(-K|Nk@ZyzlHv2J%6A z+KcSjXFi^pdFGjCo_S{8dEZ&q9>-!3??h5sxMcJD{_PNDBco@R%k&x})8|+nhYmm2 zmpfTRo=3T(%<-m+wOW49_Xdy%=DKo8yr5i8*V_Xlm^hbq=LS!adD3(dC~-DgGK4T! zVwOlA{vs?`f}y^$`Oz%EyxQsmvE<^5%EU{#6q|>*uS+lFmQsDWMKvhg zTqYVAm+vl%`1xhU=(00Rr*d)TX)TV{Gkp>?g( zIIBDqu#fSoc=3X7XliN&U$zT@(Nrdy z;Ns8OfqGGNhONyicbq&;0g^dqtu(?MEW+)HIgmhmVm{jl{+e=ac8<|z)=FE?XO_vY zBi8ykMStN1231X?4zsfCXh|&9m^U0q>-uu7cA>4+Y@;9Yz?s%hWB2;G<-IO*pPmaS z1Z(YHKflSjRu%@-I2_YnpSNDfhzo+@U#5breMzF(`;vAymF2kzg zv5^pV{4$%$>|#%uUt&);5o>O$H3_iWtpY)wjDLIRF00Ld>cLql2G(A%7K79Fycu7s zZ4o%j76JCTrDD%67lAc)51-?uc|Clt5s&kXc$fzUWFXjkzTXd(B4GD95HU_qs~ow* zY7I2*uv)zgYbGBiIAz@^~GxwH%h*U9v19`9+%K>bp!5gAR z8oVHF0BZnK2)y}#UAi$Cw(qh=Gd`_vW0iM&+06SU3kN<~^oAMe!L!9+@wvjAYy;u_ zx%9c|=eK24+hfrmQRKbdv0&%g@_~t&*dCbc%!mv65^__~&$e<$iNV6OvfF89o1TPB z*&U0ZnTtKO^RA$uFSh#mXYW`%wNttStL*+Y8)4{oV@3G`Q>I6pcGDY`=4k`QfbRE| zfn@54Renwx(yL7m|1_%FR`JH3($jRg-agNCjTxFA-^$c=MNioZ8yv4(E}=P=ZDcC+@Uz*|X$2mnxEKc>wWpvL1Zbr5m|NH{xCei~yQHjdu!XxHR6{ z)jGWi(D0kMnr}U*R^uf-ylFtv_aq?Y@oB&~;H!Wv8`~TLn*qsR^QY_GhjW^`yiTMu z|1J+2Joa(O;TLH&-fpCmcP9b206qp70elXSN6fa===u);g1OGT7k&^hjqncuuOZ&q zIJFG0oq(7Z7wX| zd%l+Qn>_ds;N8d{Unj3{I}ZbX3gNyBv>Y4;B)z8qn*hyC+2*S5n{c1?LBxLp@L4d< zTn%5^=u|(3_)YJ^QF64e@nU^<#t#8+MttcK@C)(xNA$%NF9V)J{DZZ+zE=SwC~xg1 zr~2E7|1luTd*o85`USu{FLSDKQqNg)xz-=%TJ@JU>v4DWyPfKrQ2ygr;9Xn5%eFvn z0l&6Yzn&0@;-ygJKLtqnei^WYbpD;xz}euz1Av2ZEnkd!i9h&z6z&nkKgj_8roH@Y z0jC>uI~Y%Se*)nY1NiHsfO&tL07K3P3Z|deG-|zMZZ0->&k9~s$>6;Nyw!*^H&Z&e z!Ez(Q=BmwRgjXWG8<6cYSAgE-#hV*aPa#aYu-_!(J?X)_0ZH3qfXx5A7jJHmH8;_k z8*I%Dluurz=`c4Znrju!osuX@{yOm+a@O5s+GFl@GIu|j`=iV~R^}!wb48a|j5n`* z?RHa+xueBgyJ9XzA^!a)6W~K|A*b~&laEQ{G5}Uc(>!!6=nKOh)o&ht0hM z=E?#hkpKLv(!ei={lq`^AOFy)^4H`+6VD)JDdc?Vo}d)R+2P?edyw?<&*VE@*tEl> zSHeoVOgj6Yf2Mp>jtQUA$qw_I4=$UpH8aVSYoN(j37fof3^er^It)J1o`nlJAN~!S zFJp)^-#sJF=lO#_Gk=^5zxkFN;|)C#2JlC`gLqMd{bfGW$M`z_;LqTjd6)EzHZR?+aE31WY1^7|=%|1jJmaI`T^{0s2E2=@x(U`v|# zhv5Gl+!Jt5S@A5BwkjRVp`)!zcLnfhuhLefqpeE!pyz0-($Q9>qpeCuo7B`xKW$Sw z+NN~0P3dTx($O}hqisq@+mw#BDIIN7I@+dmpM;}*O52o1dnM(Ke-{ZAwSml#aG39c@!O+NN~0P3dTx($O}hqisq@8`O-OO2{7Mv0@|~_+ zL;va0|5u5p{Ycx9j<(z{nyyMdunyXUr>lo)va3%dF{_TRKg*M#VRX)r9^c$3K+Dm(owjdpCK|0!kbhHKOXbaNO7NnysNJm?c zj1Yem(H5kmEl5XOkd8K=p@)9jesr|)O#DyqM?d3e^U-a9GwFPP zHRN2&U-y6DIkAgB1mIk}@aO-}%qaGcTkh1}@e%zPA|dSIz5LbN5- zX7@bYzlg$CglJQ$ZC;o+9EO~|K>g_}e7oN?eB@#popX=9KWV zWC31< z$AHtYX!SQ?cWt7@3_`A^)wdC4BDkzp{}je2B&?y|5a&od%AY)cF4@-SYXPpm z)jelO1~(iDH^i9p=Jvjr>1(dc)$cEZ;g`WRySlr|t!rzK^{9nt(`6zNkQ1)r)k7;> zb!Kxyt&7GF4y(NpbwyO2h{V+u&8$l8?&x3 z>iTANZq&?4+(%G%he26X^c1vTLvQ@x{+@f)*r2*3qKZ*+Eu>b7{$z5Jx-i)^99PMR zx+AI??{RVZsq*gbF&eYB1 z{sq+W>|7>L%kky)kUt#52~%vnEb_ilWMdX_l3x$%Z(59 zlycX_67m;ss@;gsG)fvbMAS>ltsBk_Uthb`WZ~Y3dR;-9sDG~){rfdEF8h+(Vr8MK`h#oZwFZA85*5;HQ*ogwvWm^ZCB?h>g#aox+} z2J1n_U=FVJ^Ks`$J&%0nM$%h_!~D=Oo^}44%vI8mdB#~QV>i=}y zx_C=G9>QI%vAdzC@kFGSN{<8F=T<*< z+{-YHckI8T9bbC%6b2Li8mf3*B+)C850fj-vA4(@=McUnqbc)QZV?es<`e5TM@aXn z)b_MTF1O#Y)UAuh;|+}sW+vfgyn31%&qV$j@I%huzeQT#<`3#rtRI$0Dmk!JOua5V zKFU=myA7*T@re2nA4QlC9#q1uYl!cNn;C!)A=Eb=w@IB@QX5L@U~|h%i#mVMr1JrV zy5DupLKhzv~i($ezO{Dh9`7}Ckagbn(MB+V|#6VtvVJ_=lF9tA7`i^EuY3m z9O~mCGbLw4d}430OJubzOkpGWbVN1y^ztEzYSF=utYA-nk+avEZ>an$>!e?@oRuc0 z3S+r>%vL92<0GZ)z4Vy^wgo)#OUbK!na4a zp>nT^pSk$c(d=o)%0Y)u*X1Y7cF*`Yh8q^yfu@?C8$E)!D%|>D>|FSZrLnO*aUqC> zJU+suQAUXZFAf9v`$ZVVzBcpqo3H;U=zL74J{WduWlG|Y_*!H|xt-xt{HfD68#3^D zo_c--mK||*q8SSqBv*xRlV9#fxf{(2j8FX3t1H}=@AFr1648=J8p#Intl#V3gB6>MI#cuOcj?J-sgA1rbU z2&{nhaz{gBZ36R?brFx7vl!i7w1OEg@UY@b#~1`$%* z)CJ?clPBw#OZD-G>qhl1{18)})!aLI-+gbK{GgY;x_!y!x@BzoBibtmAFofa9AjcQ=;Kw}Ed}v{6 zy0mp_wgqz;{#Jze@LPSg%00if&X^>84z8YOR3hO=@}ao;=PLI+-{$AzarHW55($%) zkIL1@F{CMVF*6JE!MS>Ph1ja+_ZV5`V|4YH#D*yJA=&46pXBt-BR*qSf5w*}Aj{zh z6ZsRuCbbzpeEhDSI0JO_?5i_{^I5$5oz-sZP}{~S6Uhhj>T|2zo}r#$6UT@2>i=Es z?it1v1=Jlknmwl2P%L(RPpnnVGd^Eef6=k-0Ny%vEhkr?s) z!!{IV0jfFdH=ob_)fdllb1iD6)=xL;jiN|6)+0JH+#DW>)i!M(-g2=p0poSYeksdu zv5JN{=&OVWRpHoH1X$^$VFOPUs2`o>)?LDs`Ugz|dCEZja*)zuE?NF@QV(Jar;kg!A}+FI2^AxHS!#T zdLisycIA%R566axC8+Wh{MV8L^4P(B%huMS0|SY*hbvb4fkvM%2?c zH)HQn)koD+PPCz^F^>JjSmQSHNQ9?9)N^OJ^_=Ob(Nk(mN$ris=GrIJiBji+M6+kn zH#=0Zgb&Ru)T`N&+7?v@BloJQh>>3&AW^ria^v;Fr+tZ*S}lg)(5Bi2?tr$b8=^g% zu80j00}qCp!>xxC!)l?~AL=}PqCQ^jHc7qF@Oux;HvwIAw)ECcm8#YTR z-6*?uNNsAqq*jeYdt$K`bb3rp532V>wvy>))bXs1`Yc#^sbbU?=N?4GRR?tK_*LU!bxt%kpys09ph6@nZtOI>*5lzu2z>p!YV~M>?S|XUVNm?w z=4Qsgc4A>NV!OkEASn?rEmR>9p>TD3?8+f6(5Qg9X#cE)f{VsrWvXnm+7eOwn_Io4 zSiEcKB6WE*NqM0J^(2NGTGXJSG~7o-%m7nE!$RCm43o1;g2Lm3`fXT9XGYB)1P@oK zN6+OBaZIfo?1{A`E{&;UQG}uPHn&|8=W2AdJUL(oC7`|<;uono=}HcL-Nr#OdbkEJNFjBcxGXF-p)*IrfAlWUB(XFSLy>Tcnr-ep+&)%s z3|XG~QqQb$Tbf`}HLH~+wXVBI9cu1L#Nt+0VL+JY8_d*Jp86Uibq;lq|`JYXK89S+H(6u&(P3tV#sti&&H|0UGE-fg|4`~ zA-0Xf3pxsR%8;6js0$-k812jBbL!3uT@3G`hS*R~tS3ncNyM<_p}PvLxu&@mngb7^ zz>(Xpi(%8WR{aDM#M#m7_U~1-(TSnN?L$K?325A*T#UAY3nLFqUs}V#L&ev zdg}2F5W|v8iWKh{*f$8)btlvskr>HNj=4KJA?6Pxd+zA{o%m3P`ob;aACJR~#;}1{ z)(t_3hcG#FiALMwy4dCIMo;h%pnC8k_a>{Fe?&FEbxSuyeHG-Mec*~lfM#p{FlSx2 zy%XNs)mejyRD7s&0@QbZODe2|`o_deB87!wsHHR1a=+I}@>F;=`&Ig1#oIZfLGWXQG)sDl=$$ ziH8@}_cyw2(3M2#@mtE{jOq_A21{{M3Ol(wtPDgLGl~rh-hS%r}p4e3Xq1Npmf;pp#&1iuZ!Dx7|!I4t_s1{;A zK9q=Gr#3dnFvDEgwq<)3sznHdR^AYuh;6CYnz%b$+ZxBJys1x8F=OnHsw*J|d(@up zGU86wx$TEvFX=SI{_6R)3aJ6Oob?Fe^}hUn#|Q+jKPjCz<5WoA^91hPvq#`QYQyc z&0y^iMqpW$ucFE`$I-!m3F1G03wv9WHW=QdE`*i<{p&H~C)79;b?t(P9*1tvy|D)0 zO77_~D>WXiRo}b9oxJ2SwY7NymQ1X6%Z^y=eTHSy(ATbXx7D^J6WYG&4%fZU5XGao z>LXj+w%V53uGRoyt3ilvRLkX1tl{1DQ+-2Qw55PaU$bK{oT$ENe!N5TT1GQTe@SliT7?&f9^zrR_~Km zE3Cmo&aa{6Z()~r`OO4wQBKXx^1J%}fA5&xvYQVcK9I5ZK3Y69TCChFz+M1X|2!hC zJ{oe@HHxrlR)?o3rJ;ST+$US*&)_^pt^OEC39fOIwW_08T@!7*SZ4z}doVi+H!!G+ z&G$mhVFfXv&l3n6-YtiIzWvtN@UOht?eNJ(ly5WE`3(zKQAJ8dC*)vsBoIm zd%VpP=R9b!Hc@M$c=%jBjAwYQ4Gku4BjcW`axXw!ZEd}Y=DBqB4}9ELrFR2)KwbU7 z!>eyKvmDQ>s}HYm*S0p8am}Oa>RV?*(?v{Xo?=(`RlDl!NNYoVE9>zdn($n^`kHb# zWAbTe#Y7AnWZRBJuD-riwFL`69(z~6x5ACjPBrwZ!eGLb%yaPS%S>oZB4r*aN)yb} z@#J@GQN0SyE=P zuh)t#--J3pGCSg9@RYs!xHNgT6{fLI1drXTCy{VYq@mUDmS^zQUxfnR@-V*o4Ls&f zU|O#=lNyiat528j1oN1_`T{Tw|9M_tJ%iI5=S12E)ZaSM-2Psy4!W!VYpky9AFZk& zMxBR^iL)Zo3$I{vKI9DYcj*S?zw+St_xU7fW@L17YBv81e_W#!qc_u) z!SA+M$6O(wS(u-nE0o@DNhz-wm$^)hnyO=&EdI;2E%D>O3_ASEa+%UtDqonIpUia@ zrjF(dd=&R~Q&2H2c*F12;oEvP`^XZ)TlrD#7a3c%TCHu)7?#&qkGIs6p zXl@ienj4+jrXR`SnPn+I6I`r=*fY4x@7=Rg5zH+VdE{r3$N0?|hBNi#&-aMb$&d@9 zc-)xp`x|TDXY@GVFOq|aCW0>;sn3MmdTgJ2XS4Xuk@^eh&0Np^el_21b}RV~lKO8z zooqF^`8txiRk`uu;hqkf3N4e^^urt@I`|~G6LOxTt+Z6*#ooH0{frNDPxrJn_U}_K zI7@^`teqv2h)xM45h80zBIc$gg?P`K0!c)7(h%aCXX@|HaBFwau)K~xG~{Ki!&O>x z_$n;Fnz4e3w(sxh>updQx|6aB?7dDb{$3+je0NR#juJ!0Gb;ER8!n=E>kp)+dewQ| z*y8gy%~?Gq77ss?>TAwmLOq6Oi+}AjA61XsGMLyDt8c-B(P32@S8K*YYhb1Pxy-!( zLTNmW9KL~~d0WmX{QH!^x7mt#>k8xTpPJu5U^p`csyjC^kB7Fuppl4q!=4lDpsq*G zclao|!sw`;UpQc8+KT9Ps~LKeRt|wl?SmZxKhAdyIw5mqpbd!uUNi z($m%$uf+x%N4lDi0C2q>kJq-;#o{d;@ok%0f@ESza#AO^wKUe5wSm;~L7b3J#LP-U zqJAUfUf5obNu&%BOVo9>Wid~N-1STG{?^9hJFDv3IKXN$^5s?aLn}fPq1^SCU14w} z>bG%jzAWM~Ho756}gg3AsWO8C0G`ip9JT@b}L=he5%qNJ(6 zeWr~iQP{w-GD_56pIOnWZ&pU!wh{{7*0+zYbT`yCHZ{hszZ6gDcEEHjlZMBzIO6Pe z6@O%7UT*|TRr*CKeGwjR`KIklV4<8wx8QyO+1V3=0J^@?u zyeJ+*M)BD2%0I3@TsE5ij@zu=w>LB(e=Clcwr)y4*4xm!sqd0YduwBtY~52!rKDP; z>NB@|qP8sS51{JBPNS*jttCZ|d`P+HH`LeH`$vuWAr18hQ2Lwa%CyIyFOB-9ayQhs zKvR3KqDp}uz!rTF#m{c2-$9ho9{m1>`Ya;Kt=2DLYUn*;cp(M-J)$aTz>&-gCd+Dj z|B67#@sl0u*Ex5TQ~t-mX=rOS56-3VuOP0Rf^Q&Wr=O9Z_fVK))^~2APV>$yN!EwL z&}rU735me8g9X5TJTVZnzB{~m2hP5f<-wcB7w(r#cZwqXAMYr_cNF0-UlHo<(O;&u z8mL0EHH-Hwd}W9mAGzr6P}AK*hvnZimfPNEF=T8#29U6#a&sK)JO3gAh6y933m8^_CZ(>JgRF4tE71jLCloI9y4eXS!+ zrnW3c`dk?jzx1P?tEx~!SRg~8*_!?TK}?wj{}t%Gma>?SASPKx4-T$Zs?RSjjru#} ztDyQdMrF#(>W{!2ufW19EER40QW+AzGNir>eY(nBx`**wu*z4uWt=~SsIwyRSiG^R z6({pW|3<=>;cF>YU4+8bc9LJfN8Pzs+@YD~3 z%YQWo{w2>_@Q5XN-hyFhJ#XO#?$RfJm^%FVM4Q!q(CqTs4+nGF`bLy_7Kq1!K@M%M zBbCz;KU=2$24@|N2IKe3)StR;<8=v~h{w@5902d_G0KNuHB-+!?zSns1JNT7ZyKhk zeR}Z|Qpfy*x@WwjBXmS_{`+IQ?7>99tO&u*mJ$=F3!T1!K`UlsQ zv*^83{$US(I!*lx-o|5HQlWPaF5GK$Ilro=un|=2pP%OU)zoh>rlt29{~I>^+M0Sb zXMqN;f#bfxo&B1QeSYpS7yaWAmEE;D5mgCqHK>}S zs+01rR13>cT~ZLvf^WkKQ(e&0a@ur|r%n?%%R8u^MZ}-n61`G2b~o{T3LeIK6#5|K zH1K!n!^mIuER46QalAxN1-lyFnSL{+g|Vr*SUbKIQE@)u|A!9K8BJvf4NMpR=J@Lkdt0J2V`RV*fG5_w!ekhVye&$df-yRs-x_#@R!pQ9CWTb%8 zV?`Wtjx;u1byY*-b&;(zrOAbvLx4DWn}8)$${*i4vn{f9BC>T498O3jCT15<)zNBU`cNp2#~s#iNrW1*bTP!i9M4^HbR#&Dou^!r0=} zjd>pDTJ9uvxqjpaPh%k5eDAbW%uh5p{B3lK+2g$UTZ~+XQTY#j18TrvXjvRXI={q{J z7Y7l?PjpP?M~@U2W}LBnQ6#E2KZ6FIKr3f<;lmrk<&m+mf-|2g%uS^8#e8Y^$m|%o zghIf^0erTVN$n%Wd>at+#o}9$1boD6RClnHNny@V1)1UsBQql4Y{qzDZpPWg?@jJ3 zpq30q(p;gaRaQ=jlf-m>irC_3{|cIOY!07m8O3ms_=;9bT<084*HS^Z^IIfcv*U9W zWn?h698_P*aS+czK1j>H!c-|QS$uRuyv+;29hha&kg&Ol97n&-0d{5QtP-Tp1V2ga zan_O?Il&&>lgjq&9O7_8iZrJrhyls_(kTohp)W^e;N)k=EatFmt12PhL+=_puIb4f zn<|Y?YAmTJ;Ds>WYPT;pqYH%sKF^XngpSeGc{I#Is5Ffjw&*O6GWM}ETgc6g=cEdx zKtqp|Apf~hBaHr>?XOuYR{t^K4J1gI;CHs+yJoaVh8dms;!GjvKuuUi_a@|6L;z5F z08q2%&B>URPc$Nf<_|oc5GMDubvhl{bkdob!Z(4?`Z;vR=-dK6hEsS8H$vdUY38>!DBf?Kf5OS~0qT}&eNJnWdeO$&6(@aeM25-n4jILRZRvD&-H`^V` zWNvD9EPvc74WNgl3VNgllQo&2ohVH@8bQ=a`w7s+uu;Df@#cJ6Ko+#l&gqe974F4w zB9h5)nPUCV(LuB4wO-maRhT(8QpjtjrSmr|h-RCc=_*3m&!WroV-C@~id|4+m`n8c z-nhZPT*sJnklPN_PJ9|pm}26YPZ(}eWoS@;3L1@Y@gO40>0_Bzh;ay6CQ+in;1OJA z77tXiqzsN~h#t}0L6=}FW~L3c#ZhF2aE*^(V(Qq_o9o(@+mqeBGwmRgM)u}_F_S!y zX*b@!omtE)q}eM1(=RD5pH;nLJKFk~h+$VzZ|}(Q>~WGrIxTkl6qxeZ2g@)5EdiTP zS9Ds6_GlPrOJ|oag6~I_%B29K0&+SIp~qo%XIDCx-Logx+txRf+mqVam)q5q+?jE5 zIT#_yoq=6ZbaH6^Sku)`E|1YTk)Its;p8Ur_-ailpUW2t&TOuL9vYh}IJsk^h0@&2 zA=uBX3K|$nZ5p%oxRaYcG%gBxJU2%f%jKZMVP@n?PO__SXD&OG+L;^Z%M7Gad(zpR zousd;Z*N<&t24K!y?bXz*2&ErLg~jwz0yl_C6p~?F2lreNDo*5s${xy@ToGWX0Pp_ z(IiI4W zrC8~nLx(Zkz$NU>V~%j3|K^TN=~{9}N2Zy1VtN6E%)s^9TD(ZTQq_=O6?#-c0c4x1S$mVwT?HRascdlbkdMBfH4t8a-4rr1l zckbJh?nDd5$6?yQ^6MJjiJk$+i^B4v=}~mSbbi)^#%HCeqBjpg32N0YLpV8gh*~f^ zw>uAYT%g4^D)fs`2#eYH+$gLpw3zcb>T92xAj@+TBQrB2f(ai*7DZ3PG;1Hq?vy^A zFBP1T5`L&I%Edf6H?bQW23t!r<$aQ4F0J&+vv~S3KPDN8kwH&L?%qYTNa;HcEp~yJnXw4i1&C~=P!g{nQ zjnAUDM~cv8GkF<0({mHx$^^KGHh}~!k?7Dg%=2`vvn$gh{$o?Kv@bB!Xg6swYQ%hr zrue1%AzL(2$i8$}c4sb?-jl^h!|3yer+jNpGp;SWD1mii=U^*Iv z^*$$z+-&}MneyyRgM4RJsusE3+1Eu$;~9HeU5xAP*_Fw)wd)zcn;}r)D7GeM7v?bz zXN&Xs(W&vN{Fs?Prevj(7B;cCnUUki#_VMgmts)wm}`$wv$8nNHtHX$UH0@OE=3Wn zBd3v`o$0m=B_}sNKLMJ>{WM~YQcG((P%MwIYbR<1ib&>ScL8E3hP>A6GDj9@Azlhcp`kxplYo*7Q&Ozlr$n)U4`?}bAy_TVJ0_x` z=doR#UFZm}8B;U!T-8wZ=BBqdjc98CmO+l2LWY5?Av*`V%bP25vy`!2u+0aOu*t|~ zSzPEL!5*6`j-ioS3Vc;rrjux!E< zDWFl~5;abNA0Lr%JU>#J%*{=YIWv515YsQT%(2oOUJ=D2N#|!BQYtJEQTr4xXL>9* z#)Z8z3JK!uD@5cV*N`SKXIv&I7Ke2gUbJMlLpkr-<0QwigEfx5gF+r_T~ty$f+09n zni`qrq8UvTO6Rf8%1w{Y3KdX;&OldR)|usGH%^`}XL>IG!2|gkqEtg|u~2kiN9M3N zrebuky@=f`VJ9A;lB?t3nIw(pKnv!Eaghh%)NKBkaB6gB-YMRAh+RSSkuhgq$L=<) z{!2Mw3XBt!JvC0rLoqNxO5{CTIyYLH)?Uenogd6)Xj5+H2+de-P3E0r+%Cbe5=j>= zBeP4RN8mATd`O>g&mk*5jA@WFUUagC65T%(8M0A^DRsP*J3R&l9AY2Kv>{bduDJfs zp^$N?J7|R?&N1l>^yUc+7)nkKV|xLO8^@P+=Z@hsyjYJytxO5sV{9#Or`RO@` z>+#Wfn(xpq+*Iabky9Cls<%Anda*E9LT9A&MY*&KZ7t0u^~w^3$ri>4He0APSU%?M zg;L(%m12~S)qy#*;8D?zuZ)ffS_b=58qFgLflR*CQJNEji!=&VWkoTES;KnU6FMC^ zd(rA*ZZ>xWLsAp%mG5mkcp;DUR3Sf)U5e%O2x@`XKg`p5LPYmqBk!&yRb{G|pTyG;}&m{LcKigUxJgld|2D-izpvNp>TQ zeVJLivc0+VaVY6=ClXdUr53&L?pu%Zm?5<>6X1C9}Yg71& zx#8pd)GTa3N8(b@RN_fP(e7C&Vf;z=OI$B{CD*nqmr7}zokyV_H4?_9j)T3kFsk>) z+NVl;VH*O#7|CEON(zxpSj0Jprb|4yF1sLADbG1(d6xSNjzEt?4qNWCtf9d z$fLc&oSlQ&F0i&Qe~co4`F?74hP!fDN^(u3F;mb~-cczjxD$f_Wa!GRmgr|k?HQ~_ zC5@cun)Mh#!ZleWA=eP^-F>4|;zq}W#LMF+pR(zDg(7o4 zcXa+nmMWP^qUk3#fDH9E=Vv%Z1PPs%#v}s~k^++*Js#;u@LJ4qLy6TNst^s!F7pP- z8@$JXSIlFk^)M^B_AMvn2Rx}=xJ)C?gBI&jq>V{&A*NDoJLE&+c{kgj% z+2csZc6PvPrO4damG!1-)<(2sW~V@C)UGUfg88RhE+m*jS$M*U3^=4fA)#0FS<$rH zOYB{k)&=Zt*K#FT%tF#~y9(T<=k}^sOM}M3B!@?`64~3a$0FO~1hMyxOqF(FgG7`% zEet_VXW39sq%#8@9Xm6bio$)-_Gt8qm)YNHGd9V~S(eOnnYMCv9?Aq2Nl6Gccx4rZ zbsX{K?ebgCXg)Vsm@lISD)?H-0=`DBYsKBanqPR1^kb^h!fXm{MUm6-Tpj=z;75 z4>TndqMuq#@m#4EFpqP#6ld~KK~tp@-el?}QDUv;?GD5NGAd2#!kP$_wT&HKD3+Lx z1q#lRP}e{!W8+0q%}|h#aM3igv%_j*Ce@YeYRu$1d)p{>40fb;w~4273Ok&l!Wd0X zq&re`(Y$H3_LDUX=0;%mdpOMD&D$S4+6=|JV6k~o=OgYZLM_WH2Nk>Dr=T8aOF-3?3I{=Eh5WbQu)X zvFlpRQD#DwzBXn@>l97|Qm#?ChTyb5@gYXpG8Or>1PXzbnD$vLH63+zd6u$SgIRq_ zJYp?l{HL`Z^h=}`T;SMf z0gL(xjlFcNSSA$nTe66?4ll8RXibe_S)vylG7hyDwr3#hI*PeHL~K2^VR?_9vf_3@yDeRw>9 zxlp6-!&X^Yt)4RR2+ewEX4rbcu0m&<^y$d_Aw6Whin*RH>wO)6EuQL+$>LClmus~r z+8ROhlJe(?%q2yyxrnH2 z0ac!KoZ*NiAYP4TrjsB}%}tfKLeh!5!4Hn-UD&EZ!%GF6rqe0HR_!e(Vh=VeGb4Bi zf#vtrL2ueaUuR?IlrdA7<`wS^{el*Ppcu*Iiw*jRN#lhPnL|dV%cVOrgZ+UHG@-Ap zqlbt;?I1QUFlvJR;#d?XKq0v3Sy~#$?|82r9{qZ;qET$E<`rC;o5v6`Os^bjnfIW&L<4$ zRqsSJ_8)S5rZNTTgO0;7(Q6``d1zLyDvRJMvj|R-Ms|7!WFy!#8pZIzQM|}z*;k7+ zyeAsp_U?E8+$U`Ln$K#upWx4RLO0c{K1;%kPvXXRynp0}Q&!l<-v}I@cIG|ugMe){ zYfrAYqv}re{?Lbbs@bIT2Ki1zwAECfL`qxDn$U05;N7G3UVdH?|B&Qgb9>cEbq8~k zHkQrH;2!|2q;)Og9)aUs!7L>3G&DbrGL8l1C(d&B>}e)Sad-yIriS z8uaoaZMMOLA3_+HLrGao=Ox;mx-6e=wux!HFZ=4#q{UYl+Jg3yZsy}1*_TN^-JVTe zJa5Q;2LAS%&9|>SdFCC}cb@V7@LelDQ1wCeA58n0pVwdSko-Z}Yy;DH_w{X3#`=@t zJ67CT^?r31^O|(tb$x1?bklxbU(NQJFucMG)8_9XeHwA-V4t@pjrUdWK-z9A&D6_# zs*_0DRZ}I>v9G48y~g>fUk|US9z?p~5wE3gM%eVZp@;WUQx+Ju`;+;e#~XLIdg&&g ziAOTOkm;9a;(4p{a`C*`dAWGr?z~+5gQtn-P0#DBdMoK>_#V9f^Ca--CtVElqU6mL z`54c;lF3tp$D5KVucp1rmH&O@ky>+{%WCj1h@Y@Z49;=FUMFt5yG zd2A2M=Vf^p!w>m98M?#m{SvyzdOq>nH*D4U#59g6YO!&|Hk+cj}Bg|)F*WMZ2(vLSJtd)TV-%~v(m=|C*a#5k8h^E zyi$og6dfj3-nG(R!&hFcR1&(%^m1EGB=m)VV4Oj-H{NjK|_ zZZ0>R2poCKzXNb(dMUEEtWCV-Nb3{7jugaFWWn&B<-7#9tSsyZO?v8~tlmd~-&W(7 zxgNHHlxg~%*AhJ`I2ONeg(f7!5pVbfuQM(DS|an15THXdMSx@4yB4@sy$`rv#im|f z{=@NFp_{;e^d#7C`VlD3Zn!pWs}Jt;Y#o!%OMtZQ@OVFXK>C?^3@v>a`=I4l)NP^L z-S(O-Cs*CE^3F5gUwzjZ9|(VN#fPfeY94mgI%wA|?O*-MUq15}U&e&Dy6w-O`XVO- zl(QPHavuIXES5F6VdZM1HN!E?OKTp0zst1 z+30JO$GYhl=8Z0#L+BXhbuQ$CC*wXIuXKqZ-r(^r7tZgty~+H%(uMtN%I94!)Fmb# zFLJT-F^&0nn+x;Vc9==yeJ;8`%IzfPTivvDt!VNkmq}yWnD1_+QEs3Jme_Voe+=oG z9zCC$GI^uRj?>V|J6#S`q?vZ}HW#lve~r(2c$o{!HheVrywAnvli???bzvJ!m>0S* zj|uZKmo*5Ra(I`^%U1csv*m(i#m{jZ-lfnicw+xQ7=kL{0)Y5T=Uocb@UvWod6hzC zdl=9A6gs6G%{PP3`xIE0-A>~3QiY_2Ur8T%^BnN_1^%Zs-pERC46$sc@tgXj%`Thq z{II?^j)mteoALa+AFi@4me))p7Jtve+2xsd;+Xgd{EX)(!#^SM{`d>^>LDq0n7r&4 z)@i~R-euu%Mfi=<`MvKd3!k6+w!=trC_i?6mFboA7`Za^F)!mxxCB4iPWwH#k_J39 z8T-eiHwEc?jeT#@SQecvdkjBv9)9q*1I`Xp7VR+kZinf&!#{1hX}hVvGXI-}4X;f8 zH=~DR#iq9szmguNleeb)Q}AQHI_ch^*AsSGHZA-pu^r|YiS00okv=_Lex_H__GaNG zuS`QL!`|GwCTr~@nDolFR`S}^XUht4opUs+$o%FmCa8oguisawet6OO_!vX}{E(WDt(RrcNe z7a$Y<9)dG{7lGfzKO^zJO}RM))0##l+huUrZnn*Y$tTYqywlx73rq9Cq#M4NF!Qn< zCVaKz$Cye7?J#LZ229xS{B&W%^S6@DuRW5dcH1h$m9!han(`~dmG%F;;mY>f(_q%kJNN#9JpZonLLct2})@ z*HIC~F`b`hdq&c&waDhsb=<$9P9e^8v#|yBJ|6p?@%$*;W}VmHt1)@_H8$cISvK+f zCfgPr??1C)S^O%SrZcc%O&)%2jr^3k)q9q~JpAZdpTw8jsD?g%TJ39KSP6BDx(ofPUPI{T6U65?&q$9co8LPly`9$nu1VXpL+^_t&EFS^0GH)F zhqQxwZDjTzBAwp)kbP|TIs5pLi(pUUJ4biP+D`91haS_D2I*lsKT|}RFublThjhIP zyp21}-g-b+B`(X1uwwjO4QF^xJQL4kJ8bkN)5lOpW%_dROq%ZU>fszD_1xk1P)V7z zTTzymhGqHb*M-laoQHsWx_Z8UntIpG#1P}X= zKu`y#6X@Hd6A1XAQYWA^`TGoV>LN4G!TUU%>tsx-sSqEOS~NAH4p#R!aEvBoE%-{@ zqN$DXraGXT()ftgkqS}-tvUf(9aS~w*E!>ZWG*o0%l`* z{fj22sl_VnDLfJW3YWh?@lerr|&d!Ci3Wy%Zqy+XzAP0)#XXZkEEb1hZ-Yar1W&{1qUigwP9S*JPoR%auaU#FGAN|qE~I}kD5T#mq<=9e#P6PI zlv$8+_uUAS zy!uUm$F(Vvm#CX zzJU5PsnM zE+-yRY$y*9g|HWq4}*(v$95xdC#MHWePBp6&CqWKOS2L|C992P;x5%4@s*eN;%r_S$N zp4S3@?6A{J<9OQWBhpzZ0v<9dCp zu#p1Xegd7%AKpCw^e7x^BY0Z8dkLP=u>?QRu>`E9oZg^>ep3PwV1xkm%aXI7z~l^i zJ4^4`k;Hfygb=S8G`7tVFkA*8I6)C@sH zylDcRJ;Us}B7Z$sSS6 zvnZz+Uo?5aACpnyne|~f)c9$DN5q>VcvQy{uxy16@HzAVBACncg26Xolgad&;RO$% zT>}Ry2o8xiOE9Tp31)RH!8{x)4lUACl=u|EQ4>$kaUG~yr00KwL+J#!nRt3m>Ogpr zp7+B6iQs+{PtW5LpC$O5jt?!;^B*NXMR3Z*)ANK5R4vl;MK}~n@QjJ4=PNo8UZm%* z;DAK%f{CZ+MIESKq~{;tfJE?$iKho!kBH9_tbr58&~u)|rwG=WczV|BK-D5W7r~)W zf;tmV&n6uRFVb^49FPc_OgueT>p=A)J@11962Wd0Pft<@RxZ-B2M$OC2TVLYJYr}` zcOVe`fj|sWAjaV^^APAf{xUGglMeFiWu7CFCrzO9_>){aqPitDbt5RaNvQBub`w$_ zfTJEH)N-(o;0Inbq2~WSf`f3xCS-w7s-|2<--aksK);cFit0z(ARykW^TfNejIY+t?{)dhy2%%`@91Shf!%nb_2nWF$iOR0=Q~ep4r4mEf0k~2y z2UY{D*It4Ra8=HN6IrBBSK!n5Ad2{XO$z}@w$>V-Lhy5NM*lnk|C3gj{-<Ip7`BL?ASiB9bR==7oqk4y9b0T0^}+t9xn6l~B`khrgx6NK8DP+PmM zn6<5zqWl_wU`lERcUs^OwF972drhi=R)+Gq#vp{8drQV|4RcFUAVI-Q`xfG@QcS@% z2kfnrkkjaM#%km@hbt(E%E z=v}r@i>X#sR_xE{9S&;qy+M@EFrEhdDjeEQP}4~7GO7J0l|w36W&|brgLL^ZXR%B< z_darq$ry6xjn^qJn&(EYV(D|>xaJX-5W$j>Q%Y#Y=tpEr-}_9vRkFi%u} z9u9Iq@TYKgznnt&X`M{)74c>X{zk{X0Pw2z608^5&k{t$o7x0$h4vCOiZ?@WjgBS2 zrCC%Z1W6rBFsx$<4(ix(fN33T8u%I1O429-q$`AE`U%$xYKlPDJ3!D3M+`z;*c*4` z8>jkmVae-h#PKxIRz}mPvQg=eAuDznM7!I9WGnMBQ;{V`emkg}gRM)8xblRc3QJP0 z@v?lZk6^OfJhA;{gT~j*CYNOvmfLiGD=Z8cl(+cuZ^c_pv%EnS{;;zq7R!jSVuL(Z ztKYhSCtj+H`|I0>RB%PGO5c% zEngqULdqAaAe-MFtaA>SXq)SAHevexY&E0IyF7v)Yw9e^yYvs9EUEUEXVzUbrCD|m-y{2y?jr(rsMWt;M(`^-mEbw?W(dBnW1k1mdHnH0 zYyC={O27)N61O0@Tc;ib7}MUv05@vyrvV-puWv06B1lAIi4dD8CTxUY+KadJ24Bx> zg+u=laK&K}!_;O;?I%c!caUHhPA@s=8`B8{EI}ujT7xRmK^6WOVCr_so*~c#_;cD0 zMD3E)6oDpSAFI4kV)xw)aI5y71o))(ehT1W?R^B`QSJQ!m2aTUjS7Ln^_G;@w{W(v2FCfc4^(iDAumfE1Ca zfkyxy)n1bt6f?lQH^HrNjymtXbdg?WKu0ofq!L^Khxsc>7?tP@!C^1@ z>wqsxbc*0R;>{4SQOsz{eFe2@UizcI1hn6j90Tity+O$Ig@LuR8lG(e_$HhuMD%K& z`SQq;HS+Lhkoq~eKynz;_`c*k1$?Xbb*e8pe5H604m=?EB#@z72p$q|ih!NS9uB5{ zX4@;-`U!}y#U;quZ|4lQZABI)Q*6Qm`hZAX~r52BBe|zY)ZK0-eWK zLQf**H1AImNc+LQ*Yw#PxFEjjiI5dWUA6_UI+5n-S2*Vc=cQ3&t zoR(kuKBf~0uJ;P*U!?CK9C8qh`w8^T>I4E)Z6NVMwP{ux_UcM6(zkL0i`-{Q*B#Fy z55wsYeFZq6nSRS6=QtdidOyGe+WQc|quToP`T*#;TXxIjoB%I10B4Po|nSm7KczSJdL2i1?6BC%6|5Pt1-l(nCVakWFJ= z0aI2Z5se|x-7-M*k4o%-VGa<;nMq9^f#$ofN7n#r#QZod< z3Af6*(P_GL-l;o*6MsfJU}PKNC`-Q?#Zf+x{vm*S;L6es9}lD8JEfihg2&--1oURB z`~jBV2Pg6Lq~P$ta&5SA<0AcoCXpU;#3Zs!nuq~{`{1MyQ#ot51n-lmeu9U^nx5~M}x!=Xfr|S5|MMgZX(+NITna+qW=yU>BRF>cL+hHV- zEajZ}lSO*0`k6`M4KhCr^9UT+L+~B(W(j_vV+r_W7;CK-hH7%Q!QqXj+#)^q z!y%sFLGh*tUeK}M0ARy7hXRDen{9#NXN2IKcT$@ zpM+yRLeh*O8!&H(Jp6%0=kDtzV3S8)~O^+cWRcvqETn^Wg~=CP3sV8 z)kImP`|~LC#WmLnek9(#1h2uB>(~IdKfoQZaf8vj1-Xetwh*?%p{WGja5$spF4B|I z@mYWaa6~7(UPm7UxJ|tM1RoS{hTsVuOYoGAH9}(-#r)HfoF*v2iMpldIUR4Z5%rKn zWeCRL&cL?$4NhIdMg~|v`t@#rFK92pDY!FW0pcxz`ZF2ObouL)CPcjt4ob2afV9EO z7P3BTW{D!$C{Y;#jkqsB^u=K>QW*_qvIyN_e!uezW1odX$pqgOZ79cxTG8vx(bUIJZGhS|R_v3?V&f}^75Qv}=LwAj#>)CmOq@Rv2Yk0I(t zNgX1%O}r_B2XyS`0G`mX1kdVNg6DPYj{&Nr&=lUPu3n?P7Xxh3-e!Q^+DniWuP^zB zkex(u0YIp$-A7DKs?YLkkopiDSWfV1ILL2l@kj8yrsIQLepft-lrQL1f>UtFb;}|> z%!$(2f_9-QOV9}?DD-H;{nFO?Q9fDxdfT7Ep|1%zx1vnbtEUk4yiR=y;Je!U3cv!RT$CNVxV#z*pqi$-0O5Z&Le&aJxVwlhKV<=eOK zz3uO-Ip6ylM83l`)d@2dar?|+d zEfgyyw+&*os5ywWqFw@Vsi=XwE`Ds8E}IspY%r#7g7ArcZzCbT6uh)ld;>NXu1*sg6EsU(Ky6XQ7Kj$wUy#>$-M#MMo}rGP4}*a4UI5t3&kgq7|Lmovm`rc ztEGUP&5~Pf~? zw~)}-Gg+~r5Tiw*2L*jmkjc}I#^Z-0Z3q=ngA?gPq4k0nxtnqb|-9jOi z$0!SK@ z4cVWFrxY(B4Z)`r^X5$WWQ9OF*YXlnb_%ZBIXMmRe3KQWxWlN+DL8WBa}{kD8iN>x z*e=ty!MTdIi;ZoZ;ua)U7Ozl~k{8;N1NeSQJ9LgI*h0aEYQ2k(rDR35-nwHct#>W% zQ|^n9n?u6e9*QE8`K~S%Y0yndntl$6gFz{@n@QF5)iA*ovC&z&g^mx}y&nme4#i|+ zxSWFh4@Zx-|6pum6k@wf+Xm5l5(bBiZ7anaNVsECQ=xL4X{2>Dgw)}@VX3`H>=vb1 zCIU;>!@v^%HV#WRg1AwDdV$X;!-VidwUf60E)uyG1uUB8ziYo%eM6f{=%4#>8ftQdu` zu51UgiiV9+Tw>G&g&4Zc=|=3swLG2+SC>}9tf?~JiQtX#p ziXTZX1$(4A$hPk?Y>YyRFSo_%My$dbK4Xe4rzju^L2a`T6s%eZ+q0jbA_uS7zhD6U45k)?Kn z5EM5Xbt%RDl1s5eaw&F7F2!!irFdF$DfpOgb#bs^DH99IB!V(AmO0LpNsNJz;_kZK z3%1s<%LCRO&Tj!LO}A1!i-ZnR958At#p{ww!78v%QH(Wel;R}GrHDu_g*ejc1_H&0 z8+I85tH3{NMJs_2$6AQ|?-p5ge zR30ruz1q|my&2+GQ7LXWYRfASzmnWnAr6abTW94tlhsPG*{BH$*2ZsWQnC(Qu&jo4 zFgvKrjo4gJ=Nrpbie_WEb_5-j3R+o#IN+jt2eP&!A!HN}8nxvqh<%d#Lx>k7_W;Dp zqFVpo0zAQ7B~gktqb{RJOD;txlFWH(Ty9kSS;Ih+6{Cn4bt%Opqqb5=y-S07W2{$d za@Qnl8ez)BDNZzMjDqFpK)e#v5Vti5VLS9YR5BLkys#<7iRdD~7KF)GK?_?-xjPM( zjYzPhpfx6bCxp1`b{$UhzcBMUO7W~wTPc1jxfE|nF2%c&OYtcE?suPte0Sd$`@y zw~S&ZlEj_bULh!~UvcA?1R@>;Vp$M~I0G@%__d5;obOk>LhU4^!QMLDdpx;9{S+j; zg$i7DoADA<6E_aTC_0R~oZ>E{UPwVNM=)IV6Y*#KDK!=5>=FYC`W-f~W3U>`Mx>#* z#o3EnoYN{qtn@f<{pW}Me!{TdPwX-I%)8IG#0RLbBw|A!(M{_j){CHW>kMabz6U(TLCA01LtL=xMSniRJHz}S% zlF3Q!heA-`0e(I~Z4weZp=fjjwPqnGa*m+ZEd)iu5!8x8P;e`h#%(a@-9F<)jDk&L zfu$I4)EEWZMJ~lc$)#YU$faPt>UPMhsA;6hYNZ%s)F{PRq+`9c)6B;-vnTXmRx;}( zv7lhnRTkD)2JC6^mEvWiwo(i><(E;g{BYcWsGrF1Q3U@6x)Wye!I>LQRHRc;iq$rs zige4ZPI$)SP&`x--CN44rKfJG<*&gsoAY#(B90{SrIrwaf(P_);8}96F^EynKt+&u zjsF4(Q-FeBYeJ}PAXWf&2wR5eHEJuxCdsvi{85$`BveDO+^7kP6-eR`wY5S}Tw+w$ z{h)?eP(y1_rZp%Nv#l;f6$vD643yGr)HaJqvU~>;{3=37^Gj`2dP6yk+bnOJJ1$X* z-ywh6v zG8m8vbyEyQqSx^XwGl{ziR#BysMA5^1PcuJO`^DtsEdgU8GlykZTW9+3YG{5B`}C- zgCHn@L7WChOl2(;wWthVQU82}iuA$V4+}~~S?V1md^4)1LPbpbaM5_+nOgZ67FVmA zwFgj|33HO-B_vZTm4gCmD^y+;FrY$(zQAmtI|13UxR`CpLD+p~PjqDo=T0=G52G~U zqKOr%tV}He&jB*QBZ{9O8IP#28Gu^XuC+jU^3Nmr?b^jIF8@a{&e{+=LE>S7&Mv~U3Z5M*#K1Wb{PzZ`0j-a+v2#QA>LG3Xi zC?0nNwcSEcJn0B(PYFS>*Adj76@p^FBdGB=PY^X5$SB|nB+UKV%1S70hHs@e8-|2 zs?@Od(Q^hOHAT|Uks|XSCSQu0=u?#SKW|O8E;awv=1BbcUw*t1Bz~=CMZ}mY|Gz&`8g6=qZnmuTPave*p|O(bEmjY!Jn}S z8}LVF9+S!_Sa;ZfzhKiU1{52OnxNqC*Mx0HAm?~v5T#gX)K&`C61L^9_skW~C>FlQ zGyV+FF=9Y5?mY(V%oAcj!N$W)(7~IL5GaaUjM_?ZD-v$wf4)M6A;8;9J3E6?F_zk9 z*rgPA88t>BW!wQVC=+KHVck8K8<53po=GUTBHc)K*T~T8o_C_vCIu&SoTAmik@qv9d9%_GL9JF~CI#R!BSgm6*ZYSaY9{YZWp-S%{3(=|%*cxe&pgGlP;aCP74 zB|a01LeLke)(@yRBZsZ24~=Y#{m#+<%ZNX{Kei-eZgtgpo!ti=UJ_KfFkwsT+SFPz z2#e+!6Z>lZj~TfYuB!M^8tcc0ezN`z;(jvAhR4f-YcOMtJKsU4;G6_P}r+F>Cm z-gboT5PwtfDKVgU+8I#WF9Zc!=zB2xb*f*&w%t#x)nN0f|3eQ4+rOfC=o#(}(VRLq zkemHSxX1hCRP{>j%U$jI|H%`c_Cwu$KB}tA+5R1MypC$1YgGYM<&N5xvi*S5%~t(q zaN_@+s@&~)2J>jgd$*F>{vUNP-hZsamhX4r3>^8>Ix-OJN5pL?gS`5S`+V2p+zC&) ze!Jf<@hAH0+SgICb?H3y5uH-|vK)-lCO;^!oVpxsR=DCm2EU(}^JhdiBOwYD*C9#V zsNEn01%C=N98g=5E!(1~h2?0h9kNcok5Ielg&R9+N!^?>?k78NsGqR#*Iql2P!$D# ztTpV=QENEryX2!9Xy47=sb)Ymw(jUMp$0BimyRNAITbQ>B0p+wP~62)O=Z(Eb(;{|D~=1^DPvc@5^wd?l_@#Q*B`j>*rgm_ZIIXJE%b)y4{r+^0rTl zzTMHLt`qv-m36UD=Ys!e)+R@A_In43d6d)5EN`KhgQOp>XM3ckLHHv0GZH~tZYHs< zqwR9e*p}B_RU!XRw|A&(;{)|G+`prA-`yfpk?1>6Ze|U|Rx|9#gnIqX?N259Zpy9j zx+~VS->~qfjJKJo8l|`kN#-K8yM>^*#}T$lTawM$qL{cWN8=CVg{`w+H$Q-Zi$nOD z;@-Ih2~AMY`@Sd0pTh??e?DLn@1yO0x~G;5d}X7o7IRks`309B4$k`yuO8LV-s3I_ zTUFT71>`8S3V^j#S$#)Sw{#5N@E-H-;jy9n;e78I$_T1^#SzqQ z6@ua+M^Jl22#TLLg4!V=D26v!uc#e|1g|LgBkAGr2ce1S(8MZ1Xkt1vu?j=;2@`=B zg$)fp+XecL5EM2vu?n@p#=97W4Na^PgeIm#6RR*ZmrDtXTaf5>tU_(85EM2vXdGy# z5EM2vu?n?c2|-~)6RQNFiRsV;r@A0CaUGht3Qe4$8E^WWpkQq1Xxv2U(}svsOfzbN zVmgx8P`g10iW?n4ZHEvPHpFog;_n$EPO(>PD4s@=TB#ing5o7dP0J*q~ubJLK1Uo=LxP$JIE;^*G1PIRB+75vSNFg()^6NpsY; z2ti@z0{;6M=ypTIDef|Ag5qu@DNJpL5EOR4Ad*0j8X``y+o%bOCy}HuwdaJOuyZPI z=G4C$B2Mv!*igKMB!#IBHCJAO!p^(6ns;%|yOCl;F$zfvQyVP=#R-m}Hbw}Fv5ufN zP6&#V96>E21jTqqP@5nGgEpQz75aGcb}yC2<<#s9x9MZyu(RtrI~)e+Qg6M|x=BdF~Xf`VJMcx8{NbX%&7*($Lnu)bT7@P3GbwIG+` z5y_=sWorFkO)E`SoI+Uly-~8CF>DLPl}1faT!mzw>_p`u$)~WLXsJ-!ErfM@>$&JK z5~59U2a@!Q+IAr*?sEjSM}(l*mL_vGRgTgb# zViYW*p z`VPcrjBV?Dh`6W;hz?P65Cu_fXdXiuR-wYW8n73M`!3}zhE7n>n%P0AWh~4(nN3ND z)tj_Cd|KT_KQafWl(S8jC`KDKaRS6x$))(564iPf6pyhu%fWeyaYl_%NEvtM zyctgdwp}<^XOID+)HHB9nu0Q3_C8hZMdlqGw^PN8+rcyah>>e*x#jEsZSH zJU94epl!Qa4rRswug2t$sKKZjTx;;b1r`r5xO0ic0}akOJjh`DiBK8f4W{t+*H}En z;MsK+n`TTN|KNX9oi2EI6+Wg4kEp`OR^j8S@Q14K$SPb{g-7`jk?euqYwwPMntXfc zYm)QYyAddR5N5%(-YHO?Q}~m>`xKr5d`RKhz^^FW2t3A*x98QGKxu3ie8s!#ALZ!Z zO2~aaU*ngzL-pW%<{n~*LgM4 zG2}|TB9IAXKLmU$@N(qa_}r~{+HY5w^}k#jj6eCq3X{KfK$yQ#Ve*p(20XF7-gre2 zk6dW^0p5x5k9Y#|YkYn#ba~Zzr}WXk$*TSc3}-0J`qK)N?^KxlE+l!?d8hVK|3+nx zvG=Y49)|)pep?kELH;&{&xZY-z#JoMf4|~szeC~kVE+wZUMJT64aL*`ZH1S@{7lHTqJmVQ19Bx0M za0T|Qz;l)TM#V>vf1|?p!~Q1VD}8(NV}=CvKMwvxV2+{f&pyS|e!s%>?`4I_A5xh7 zqMNgU@ty}ytoa!Wtv>_2Ux6py3Tu1)jX|Eg>b$p{9;`1Lls^#|Zmh!B zRpBjF__iv1x5Di2LD{CE)pg$rZD+86ej<+!sM?zCWsI55!L^>@P~LF^4b4Z`ZrkiTN@8z(0C2; zy1<`P#S~HVGetVVuA%!ET z{0)WK{)iDle72*$#;X1i!wfI!-y(${hCQ+F-`&c;r~2@3v}!McT4yLse-5hh&-78g zxyrs%Vb+&ZnDy;cnEc~ac(=l|KddnA-%yzR=wpL;ksqTl`PmASpQAAOW);65p?}14 zk7hQ+yo!Gr$)qe)4fad`-L*X89Eglg}wk zzMwGqtqPOBtqQ+hg(rU~-2TRq0cQDY6=wYhM}_$b9}Y12OGk(CwQBsc=sz(RaJ$~% zJP`rJ3tvY7PrMx01o;iXhlYpOCt_pnU!R8+#@W^*z6uk{)?XeG*lz<*JQo#M{z%pO zH10g>znp&u%G*eks0)5e5y-AreEJ3;UbWueqyC41`OeXfKOd`MXykko{C9y*P&^;z zVfn|w{}`AVwmcs;V);GbUj!bl_%{^)4EQ&JM=72UWwGUd41Nf(_K(k%vHXkR>wr&E z<@tOZ%l{JmRA75vj)35^lq~-m_;Z2z{>u8#hbvkB2>4~d`n<}=pjv(q#{IG?o{t5# z{Bhv#1isd_6UbS8m_}73F2Fd!t zM#U8>mX8MQ(Vh<}gTSlS zTMPTI1Mf9R{NqEp3=RHr@IAoyE1u8av;5WICjuXb>(j=E4-B;YX7Hy2?^fmcKt;=c z75u*eU#|G_#{-^waSw1r)qi6o;2!{g6L3_Oe_8S00{;u(U5dZ$a+@V5i&@#Rkk zS^xe8{F}fL6;Hfbc6AncuWz>R+V*j{u}z(;`jbTn%}3ihqQ`g(j$ z@wDgT)2uz~n{jG@$@6C-HNX8+0VdDi?6f>FfA>>k{(`KQv4L~2E)MeyBAr126$(HC*EMn%l_8b6!2$(C+3|@`~EVac=|h6 zZlgl0^X9|ezU+R;rvpizthbE{M?mo5Kbq$wiZp(%3U{jZo6(-Zn4i|a&hu^g0bZ0m z@au|S(H!s>fhXqmZOiX*w`uFl{_thhegt+mDvWzC?q&OXK=G@=zX&`6R(3r-sQ3u- z4=H>(?0*ex_jAVgh~jC_2kua?M%>HsYJlzjL;Ep`j{x(DJP>%*dbh&2J zd^>)N6i@qRg-?L};wt-%il;pvLIi$$Z1J5-`#$)su0Utp=pFRbFSFN`a_9p_bFi7kRijN?lPqu=J>K^#J_0K~D~Z;$$64R|2CyFQ#}&{1Kc{d6_<4oN zA5xh7VTH*bQJ6fR>_fr!$u}w-0lq|G@&~H$uH%CB_%8TQ+zdOr-i}#p>mT6V2cDP> z+Vy6V`xvOs`xbcnvg-*SZ6kT&-?&);j(~_LO#db*On#EWVN96>H0kwez6rr+*{xKT8mJNqq;DKgYPeFnB*W zM%hPD>Y*z9h{CMDc@+MbSDiPmkNWsO_QFg1&nX-M!T+t-{2Ntx*N27Wem%L5`uSh| zwtNIiBmMzI{6yJxjI0A*=;IWwe z7KO?4OGBC;H#flKCn(JFdlV+WPhs+JD@^``c|m>TC*i9Q5O~Ranc;u`fam$2p?}2o zy#ER?j;;|TNVy-n=R{K&f9kyd4c@-&e!;KgN?xtE1lM{!@J3W%=l{0GfRDg%r^56v zs@7lPT_43C^Q!Y+@1wnO3xfJ+pQyqEc{nw%I`6lAluuXL_f}!VA|mCb|I<``wSG^@ z+x~B;D!)b9AKQohwkrDr%Kn5t>~~bzdmj_;I36eWVQ;_xz!8YR^m$c&b07Bm6;JyE z3je;!e&8?|_%HUK@h`Z~7YBRCf-eKFM82Ir#DI9I%@c^_PlUbwJ_U0=1#G|nKzvRW zj#Xi{k5|O}_2+9%6$a<`LjGBJMb&&uSK$tYSE0Sd_&kCQj6yu~z`w@l!8spa0(>Ik z#rMPG!T&XI7v5jfFWTP#d?!Btp##LXRoOoPd=tJ8vBl@V1N`PNd4EOwr-5I?`H}kx z@z1NuzXhDa{=w^){16;uyWlVH-w}TZSo??14qY@xBL4MN{Jbh01wLN&|3cux5{W0v zr+|NR9KMw3w};Oby$t-}NVENGfpz;|C69P<%9FpZihl&yj{iuE|C3exkAUAqJR^Sj zmw~^A_PD;YK71DGop-E^2k`)WWy*e^WF+u#;Qju59EtUBB=F*zAbuwSH{t!S9gj}| zug7@U@mmP|MSLEC@06JKE&zT4Jl}7#y^DZ#f7evu%Yo0v{?Uv{O8d>gXCS`ZABn#L z{5M0v`}iK*SCOm{Z9iwf%B8)e*yfDsBfBI{@<$Xhr!VkVSlU7e;D{0>_>e6 z&-OnKtmAVU@M-vbW~J}%xxjcu_-7=pw}rskpQTk8pA~w~V1HVP3xxHTfG@^;vHpD- z_-D%hdw})$<6e{ZG0c}mXpiNe0{$yC-Uonn`@aQ_;r!j`+n;#@L8RAyW-n{b^AS47@ysF_WOREZ=0(4zXkp$ z?1!`A57!TTcISN?>qpf0Z)cVLUf?G%zFcqU?|$HKB7XMzf3eE`wJJOi7s_SB<-Er7 z#{yrk`f~!X?$1zB zgZHB^`}}U;(*_3D<6dCx?~B0S!2Q~yKVJ_5pN;;_@yp}0NAFuIUNv|x{2IQmw$0~1 z46N(>1n?7>Klb{X0(_d9zq6|B&ja3oy7*#$R{&p#>v=9PN=iR_JVZPe> zHv#MRw*o(m`C;vE2R<3`+UnPLca{AP;M?J!-GBA~e*^7}_3eKI{B^{Gpa0RH{|Wr! zB>BD{@&5w86Z6CFAHM_s8#O;hz>zHCAMwk71X%k!tqRYp!YhCmsP!xj{7-nl8};kU z1OH52k3GP@K!0(DF#cW!tlRqvG1mJDe)(?z{}%pl_wo0DPey$0`u%g@m|E`-v%Ejw zc>N8-duyI&2BLf&*0F*Ae-!x4Q}G{rzWsRMiCF*bc$@}|7u`dA zYrM|@KY;OR2Btp=U|s*JD!c*sY{b*{?@PcuuhpQvI(#4WE5N_NdSS2khpWo}a}|C8 z_)V;*cKnW1@yFu*jP~c_z+c0DxzYFcRN#AY9$Dn$SylGu1OFE5jqP6xa2?JUT<_W6 z&k1~Psw}p^Z9ao-ePY;*=x?{3k~_g`o>f_)zqDpjD^`;?xIXF-&QJlP2C+?FQeV<=a+g+RH3H3&jMnJ`V`lWW7aGd>c;@10s(nqSJY~j=S*P2~-lpzo zF~6#qDV3OihRbixbgwFRGH-^7`1gjPali^``TA`f1e*3YqQ@U@_BM z7-3lP_q}eNaVDvG?PYYOiCyeSwP%pUIna^KWgsx8GtJqy=6v_6L>@LRQPd12`SGg(V$y4bZYRm`*&(y4L= zL4av4+ntG~ilvMgdAaZ0{_3?YW*(c{)bB%t{Qx8sIC1Z2OvIuA|#4^puTUmFZ4)_jGmRD)UM`s1e+% z47fCM+b~borgB+&?v>Vew6Id>9Ok$w4EwaN(AZXB{56eWjIz8I5CYR7 z)6A}Z~+bmog?m4gMdr<`fvfMPEAM)P~JxwOe^ae02*i&MSf zcEhM4m%&veP5C7d8BAGZ*)>L16-LlpI*^P+Hs6g-cjohJN(d}24_?6TQsQ+f6LviY z6m!<@Y_LU$TGp2uxI`xM*k%;QRbY3(RfTLG#z980y*-3Wg=`4-lw`T=>Y`mCzb;cu z<~uq(^d{Mr>P?oou>j!;;9iu)&eu*KlI0?2x?i9h{p?%?zaxaLl&ow|FFio(O7#Kp-D0#nAb&Kz@nG{;sg;oHKdVIC}J&9Ckf`M zj1qUS_n1j;L%ypCMP<7;`@6Sbd7^20vMC;0lshrp-<`BpIH~v>vVU!G^DD~s!7E2{?e&B6l$U5)T%T-c&`q^Oo03h_Taqo9k&T!= z9{fwBN^87Dm@x}eJ-M=LFS$6|oy7dXWHkpCTs{fz64syS(neh~&yA+1NvxNwnO9>= zG1I;@Q_Oa(cZ-Mh!0(H3A_{L>mb#jgNtvTb8K?rbza@*C6rJhKrh9P^Oq*Dq9&!Wz zHsaJ^Txo5Y7f&RyisI~sUDT|kIMB9aifgkt10-?k#Kw{=@hsa==xHimj3pRX6qb~Z z-zlTgGOQn~h?9Ja`Yc!SqkO0CL-2P=+Yo`+u^iz3*CPP5Emzc8cgAKLs$ zGq16sJ{g*Q=S6W*n{XMYFm1WvB$EgVR#41roZRhLn!`ymPALeQ8DxxRz3x|H-s0$j zxXzKD=G)6TQ;W==g`vX_4v{^XQrYu6QD4=GWKzc4I0MJ9vb3wq&$BZsJkE`a=V9`9 zrm)H7W@v}lmvH;I2IL*cB5W+Yl$uKZ=7@`^BiYl9bJ-ftH0do_tFC7gHRSX&In4A6 z&CYltbTuY3oO#;QS=v)Go!qqVNMaMlJe{|sJ{eygiaI*5u$aksW+<_<&CkLRSAVGA zn1%IKvyg{;+XwSjBIL_V?TgF@?qf;T9PU+kjWNqkB7R=7;ey4XD!8C5%A^Xip6G6e zdegxzvcwgzBeWp7HO^l;Fuifja&hGqSARybK6KS}m~B+9-o`wptci|^sfiEPQ@dFD z*9NOOGkJ#gnUldR-5e?Epn&nuG454H@P!%W=FJ9zXdSIT78 zcr3ffFPm7d1CFVT-c`L@!+A2%i}#NDU8&z0h6Dv{YzcV;G=Y^ReL=Tb(e-o-&EBNH z`E#2wQ@1s$9a^@m@jQ)fyyf)7QQ{E`u`}I71)=GINoMj9bJ_giQwtYWyP4oNhO|0A z{@GA7SP-$5AyVAJ+;(kdy0$a>Mb&U7Gj0QJDmCGV0Wa6_)`ExiXI>6RFI|IaA>?#N zGS4^KX62T0tCEF|?xi@3;-*a>bGbRc$^=|Cy3q2k!yak`1Fe@?f3G){HlH*w=X<%9KgI3MXmsQ>q`zdyatw~*5LiW_WQk?lbJ1k*S#sF^<6mf zLzasoJFS*26_abt2zgV?v1Up!Z>GVNEPRujVBVDAKAJa0Snfbml07)vBs;k_%e0$< zzmGuczADikYVPN8+{`P+&eX|)9}~U z$IpWgE~xP~pjP{`c4r_19}(eBvV0ENxunL`L0j4}%|pURBgT&3U&!@iw-`2Tm-XQl zVUKXX-MwtPEy$rewB!Bw{WY~-nhp3bYsdTc){dXc&8|a)c=OnQ*{W9qqppI@XMLwy z0BP+mQ99{A!0wB?smaUQT@7e;GMk>P^+t{t8~(N2jY?5_#^2gf!J78lCqyPW_ literal 0 HcmV?d00001 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.srec b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.srec new file mode 100755 index 00000000..10b4f1ac --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/Debug/openblt_olimex_stm32p103.srec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diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/blt_conf.h new file mode 100644 index 00000000..0ddce893 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/blt_conf.h @@ -0,0 +1,223 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Boot\blt_conf.h +* \brief Bootloader configuration header file. +* \ingroup Boot_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ +#ifndef BLT_CONF_H +#define BLT_CONF_H + +/**************************************************************************************** +* C P U D R I V E R C O N F I G U R A T I O N +****************************************************************************************/ +/* To properly initialize the baudrate clocks of the communication interface, typically + * the speed of the crystal oscillator and/or the speed at which the system runs is + * needed. Set these through configurables BOOT_CPU_XTAL_SPEED_KHZ and + * BOOT_CPU_SYSTEM_SPEED_KHZ, respectively. To enable data exchange with the host that is + * not dependent on the targets architecture, the byte ordering needs to be known. + * Setting BOOT_CPU_BYTE_ORDER_MOTOROLA to 1 selects big endian mode and 0 selects + * little endian mode. + * + * Set BOOT_CPU_USER_PROGRAM_START_HOOK to 1 if you would like a hook function to be + * called the moment the user program is about to be started. This could be used to + * de-initialize application specific parts, for example to stop blinking an LED, etc. + */ +/** \brief Frequency of the external crystal oscillator. */ +#define BOOT_CPU_XTAL_SPEED_KHZ (8000) +/** \brief Desired system speed. */ +#define BOOT_CPU_SYSTEM_SPEED_KHZ (72000) +/** \brief Motorola or Intel style byte ordering. */ +#define BOOT_CPU_BYTE_ORDER_MOTOROLA (0) +/** \brief Enable/disable hook function call right before user program start. */ +#define BOOT_CPU_USER_PROGRAM_START_HOOK (0) + + +/**************************************************************************************** +* C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N +****************************************************************************************/ +/* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE + * configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed + * in bits/second. Two CAN messages are reserved for communication with the host. The + * message identifier for sending data from the target to the host is configured with + * BOOT_COM_CAN_TXMSG_ID. The one for receiving data from the host is configured with + * BOOT_COM_CAN_RXMSG_ID. Note that an extended 29-bit CAN identifier is configured by + * OR-ing with mask 0x80000000. The maximum amount of data bytes in a message for data + * transmission and reception is set through BOOT_COM_CAN_TX_MAX_DATA and + * BOOT_COM_CAN_RX_MAX_DATA, respectively. It is common for a microcontroller to have more + * than 1 CAN controller on board. The zero-based BOOT_COM_CAN_CHANNEL_INDEX selects the + * CAN controller channel. + * + */ +/** \brief Enable/disable CAN transport layer. */ +#define BOOT_COM_CAN_ENABLE (1) +/** \brief Configure the desired CAN baudrate. */ +#define BOOT_COM_CAN_BAUDRATE (500000) +/** \brief Configure CAN message ID target->host. */ +#define BOOT_COM_CAN_TX_MSG_ID (0x7E1 /*| 0x80000000*/) +/** \brief Configure number of bytes in the target->host CAN message. */ +#define BOOT_COM_CAN_TX_MAX_DATA (8) +/** \brief Configure CAN message ID host->target. */ +#define BOOT_COM_CAN_RX_MSG_ID (0x667 /*| 0x80000000*/) +/** \brief Configure number of bytes in the host->target CAN message. */ +#define BOOT_COM_CAN_RX_MAX_DATA (8) +/** \brief Select the desired CAN peripheral as a zero based index. */ +#define BOOT_COM_CAN_CHANNEL_INDEX (0) + +/* The UART communication interface is selected by setting the BOOT_COM_UART_ENABLE + * configurable to 1. Configurable BOOT_COM_UART_BAUDRATE selects the communication speed + * in bits/second. The maximum amount of data bytes in a message for data transmission + * and reception is set through BOOT_COM_UART_TX_MAX_DATA and BOOT_COM_UART_RX_MAX_DATA, + * respectively. It is common for a microcontroller to have more than 1 UART interface + * on board. The zero-based BOOT_COM_UART_CHANNEL_INDEX selects the UART interface. + * + */ +/** \brief Enable/disable UART transport layer. */ +#define BOOT_COM_UART_ENABLE (1) +/** \brief Configure the desired communication speed. */ +#define BOOT_COM_UART_BAUDRATE (57600) +/** \brief Configure number of bytes in the target->host data packet. */ +#define BOOT_COM_UART_TX_MAX_DATA (64) +/** \brief Configure number of bytes in the host->target data packet. */ +#define BOOT_COM_UART_RX_MAX_DATA (64) +/** \brief Select the desired UART peripheral as a zero based index. */ +#define BOOT_COM_UART_CHANNEL_INDEX (1) + + +/**************************************************************************************** +* F I L E S Y S T E M I N T E R F A C E C O N F I G U R A T I O N +****************************************************************************************/ +/* The file system interface is selected by setting the BOOT_FILE_SYS_ENABLE configurable + * to 1. This enables support for firmware updates from a file stored on a locally + * attached file system such as an SD-card. Note that this interface can be enabled + * together with one of the remote communication interfaces such as UART, CAN or USB. + * + * Set BOOT_FILE_LOGGING_ENABLE to 1 if you would like log messages to be created during + * a firmware update. The hook function FileFirmwareUpdateLogHook() will be called each + * time a new string formatted log entry is available. This could be used during testing + * by outputting the string on UART or to create a log file on the file system itself. + * + * Set BOOT_FILE_ERROR_HOOK_ENABLE to 1 if you would like to be informed in case an error + * occurs during the firmware update. This could for example be used to turn on an error + * LED to inform the user that something went wrong. Inspecting the log messages provides + * additional information on the error cause. + * + * Set BOOT_FILE_STARTED_HOOK_ENABLE to 1 if you would like to be informed when a new + * firmware update is started by the bootloader. + * + * Set BOOT_FILE_COMPLETED_HOOK_ENABLE to 1 if you would like to be informed when a + * firmware update is completed by the bootloader. + */ +/** \brief Enable/disable support for firmware updates from a locally attached storage.*/ +#define BOOT_FILE_SYS_ENABLE (1) +/** \brief Enable/disable logging messages during firmware updates. */ +#define BOOT_FILE_LOGGING_ENABLE (1) +/** \brief Enable/disable a hook function that is called upon detection of an error. */ +#define BOOT_FILE_ERROR_HOOK_ENABLE (1) +/** \brief Enable/disable a hook function that is called at the start of the update. */ +#define BOOT_FILE_STARTED_HOOK_ENABLE (1) +/** \brief Enable/disable a hook function that is called at the end of the update. */ +#define BOOT_FILE_COMPLETED_HOOK_ENABLE (1) + + +/**************************************************************************************** +* B A C K D O O R E N T R Y C O N F I G U R A T I O N +****************************************************************************************/ +/* It is possible to implement an application specific method to force the bootloader to + * stay active after a reset. Such a backdoor entry into the bootloader is desired in + * situations where the user program does not run properly and therefore cannot + * reactivate the bootloader. By enabling these hook functions, the application can + * implement the backdoor, which overrides the default backdoor entry that is programmed + * into the bootloader. When desired for security purposes, these hook functions can + * also be implemented in a way that disables the backdoor entry altogether. + */ +/** \brief Enable/disable the backdoor override hook functions. */ +#define BOOT_BACKDOOR_HOOKS_ENABLE (0) + + +/**************************************************************************************** +* N O N - V O L A T I L E M E M O R Y D R I V E R C O N F I G U R A T I O N +****************************************************************************************/ +/* The NVM driver typically supports erase and program operations of the internal memory + * present on the microcontroller. Through these hook functions the NVM driver can be + * extended to support additional memory types such as external flash memory and serial + * eeproms. The size of the internal memory in kilobytes is specified with configurable + * BOOT_NVM_SIZE_KB. If desired the internal checksum writing and verification method can + * be overridden with a application specific method by enabling configuration switch + * BOOT_NVM_CHECKSUM_HOOKS_ENABLE. + */ +/** \brief Enable/disable the NVM hook function for supporting additional memory devices. */ +#define BOOT_NVM_HOOKS_ENABLE (0) +/** \brief Configure the size of the default memory device (typically flash EEPROM). */ +#define BOOT_NVM_SIZE_KB (128) +/** \brief Enable/disable hooks functions to override the user program checksum handling. */ +#define BOOT_NVM_CHECKSUM_HOOKS_ENABLE (0) + + +/**************************************************************************************** +* F L A S H M E M O R Y D R I V E R C O N F I G U R A T I O N +****************************************************************************************/ +/** \brief This microcontroller has a smaller vector table then the default STM32F1xx + * project as assumed in the bootloader's core. This means the user program has + * a different checksum location, because this one is added at the end of the + * user program's vector table. + */ +#define BOOT_FLASH_VECTOR_TABLE_CS_OFFSET (0x10c) + + +/**************************************************************************************** +* W A T C H D O G D R I V E R C O N F I G U R A T I O N +****************************************************************************************/ +/* The COP driver cannot be configured internally in the bootloader, because its use + * and configuration is application specific. The bootloader does need to service the + * watchdog in case it is used. When the application requires the use of a watchdog, + * set BOOT_COP_HOOKS_ENABLE to be able to initialize and service the watchdog through + * hook functions. + */ +/** \brief Enable/disable the hook functions for controlling the watchdog. */ +#define BOOT_COP_HOOKS_ENABLE (0) + + +/**************************************************************************************** +* S E E D / K E Y S E C U R I T Y C O N F I G U R A T I O N +****************************************************************************************/ +/* A security mechanism can be enabled in the bootloader's XCP module by setting configu- + * rable BOOT_XCP_SEED_KEY_ENABLE to 1. Before any memory erase or programming + * operations can be performed, access to this resource need to be unlocked. + * In the Microboot settings on tab "XCP Protection" you need to specify a DLL that + * implements the unlocking algorithm. The demo programs are configured for the (simple) + * algorithm in "FeaserKey.dll". The source code for this DLL is available so it can be + * customized to your needs. + * During the unlock sequence, Microboot requests a seed from the bootloader, which is in + * the format of a byte array. Using this seed the unlock algorithm in the DLL computes + * a key, which is also a byte array, and sends this back to the bootloader. The + * bootloader then verifies this key to determine if programming and erase operations are + * permitted. + * After enabling this feature the hook functions XcpGetSeedHook() and XcpVerifyKeyHook() + * are called by the bootloader to obtain the seed and to verify the key, respectively. + */ +#define BOOT_XCP_SEED_KEY_ENABLE (0) + + +#endif /* BLT_CONF_H */ +/*********************************** end of blt_conf.h *********************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/boot.dox b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/boot.dox new file mode 100644 index 00000000..5b2044fa --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/boot.dox @@ -0,0 +1,7 @@ +/** +\defgroup Boot_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio Bootloader +\brief Bootloader. +\ingroup ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +*/ + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/hooks.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/hooks.c new file mode 100644 index 00000000..6a592e63 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/hooks.c @@ -0,0 +1,471 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Boot\hooks.c +* \brief Bootloader callback source file. +* \ingroup Boot_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "boot.h" /* bootloader generic header */ +#if (BOOT_FILE_LOGGING_ENABLE > 0) +#include "stm32f10x.h" /* STM32 registers */ +#include "stm32f10x_conf.h" /* STM32 peripheral drivers */ +#endif + + +/**************************************************************************************** +* B A C K D O O R E N T R Y H O O K F U N C T I O N S +****************************************************************************************/ + +#if (BOOT_BACKDOOR_HOOKS_ENABLE > 0) +/************************************************************************************//** +** \brief Initializes the backdoor entry option. +** \return none. +** +****************************************************************************************/ +void BackDoorInitHook(void) +{ +} /*** end of BackDoorInitHook ***/ + + +/************************************************************************************//** +** \brief Checks if a backdoor entry is requested. +** \return BLT_TRUE if the backdoor entry is requested, BLT_FALSE otherwise. +** +****************************************************************************************/ +blt_bool BackDoorEntryHook(void) +{ + /* default implementation always activates the bootloader after a reset */ + return BLT_TRUE; +} /*** end of BackDoorEntryHook ***/ +#endif /* BOOT_BACKDOOR_HOOKS_ENABLE > 0 */ + + +/**************************************************************************************** +* C P U D R I V E R H O O K F U N C T I O N S +****************************************************************************************/ + +#if (BOOT_CPU_USER_PROGRAM_START_HOOK > 0) +/************************************************************************************//** +** \brief Callback that gets called when the bootloader is about to exit and +** hand over control to the user program. This is the last moment that +** some final checking can be performed and if necessary prevent the +** bootloader from activiting the user program. +** \return BLT_TRUE if it is okay to start the user program, BLT_FALSE to keep +** keep the bootloader active. +** +****************************************************************************************/ +blt_bool CpuUserProgramStartHook(void) +{ + /* okay to start the user program */ + return BLT_TRUE; +} /*** end of CpuUserProgramStartHook ***/ +#endif /* BOOT_CPU_USER_PROGRAM_START_HOOK > 0 */ + + +/**************************************************************************************** +* N O N - V O L A T I L E M E M O R Y D R I V E R H O O K F U N C T I O N S +****************************************************************************************/ + +#if (BOOT_NVM_HOOKS_ENABLE > 0) +/************************************************************************************//** +** \brief Callback that gets called at the start of the internal NVM driver +** initialization routine. +** \return none. +** +****************************************************************************************/ +void NvmInitHook(void) +{ +} /*** end of NvmInitHook ***/ + + +/************************************************************************************//** +** \brief Callback that gets called at the start of a firmware update to reinitialize +** the NVM driver. +** \return none. +** +****************************************************************************************/ +void NvmReinitHook(void) +{ +} /*** end of NvmReinitHook ***/ + + +/************************************************************************************//** +** \brief Callback that gets called at the start of the NVM driver write +** routine. It allows additional memory to be operated on. If the address +** is not within the range of the additional memory, then +** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the data hasn't +** been written yet. +** \param addr Start address. +** \param len Length in bytes. +** \param data Pointer to the data buffer. +** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is +** not within the supported memory range, or BLT_NVM_ERROR is the write +** operation failed. +** +****************************************************************************************/ +blt_int8u NvmWriteHook(blt_addr addr, blt_int32u len, blt_int8u *data) +{ + return BLT_NVM_NOT_IN_RANGE; +} /*** end of NvmWriteHook ***/ + + +/************************************************************************************//** +** \brief Callback that gets called at the start of the NVM driver erase +** routine. It allows additional memory to be operated on. If the address +** is not within the range of the additional memory, then +** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the memory +** hasn't been erased yet. +** \param addr Start address. +** \param len Length in bytes. +** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is +** not within the supported memory range, or BLT_NVM_ERROR is the erase +** operation failed. +** +****************************************************************************************/ +blt_int8u NvmEraseHook(blt_addr addr, blt_int32u len) +{ + return BLT_NVM_NOT_IN_RANGE; +} /*** end of NvmEraseHook ***/ + + +/************************************************************************************//** +** \brief Callback that gets called at the end of the NVM programming session. +** \return BLT_TRUE is successful, BLT_FALSE otherwise. +** +****************************************************************************************/ +blt_bool NvmDoneHook(void) +{ + return BLT_TRUE; +} /*** end of NvmDoneHook ***/ +#endif /* BOOT_NVM_HOOKS_ENABLE > 0 */ + + +#if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0) +/************************************************************************************//** +** \brief Verifies the checksum, which indicates that a valid user program is +** present and can be started. +** \return BLT_TRUE if successful, BLT_FALSE otherwise. +** +****************************************************************************************/ +blt_bool NvmVerifyChecksumHook(void) +{ + return BLT_TRUE; +} /*** end of NvmVerifyChecksum ***/ + + +/************************************************************************************//** +** \brief Writes a checksum of the user program to non-volatile memory. This is +** performed once the entire user program has been programmed. Through +** the checksum, the bootloader can check if a valid user programming is +** present and can be started. +** \return BLT_TRUE if successful, BLT_FALSE otherwise. +** +****************************************************************************************/ +blt_bool NvmWriteChecksumHook(void) +{ + return BLT_TRUE; +} +#endif /* BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0 */ + + +/**************************************************************************************** +* W A T C H D O G D R I V E R H O O K F U N C T I O N S +****************************************************************************************/ + +#if (BOOT_COP_HOOKS_ENABLE > 0) +/************************************************************************************//** +** \brief Callback that gets called at the end of the internal COP driver +** initialization routine. It can be used to configure and enable the +** watchdog. +** \return none. +** +****************************************************************************************/ +void CopInitHook(void) +{ +} /*** end of CopInitHook ***/ + + +/************************************************************************************//** +** \brief Callback that gets called at the end of the internal COP driver +** service routine. This gets called upon initialization and during +** potential long lasting loops and routine. It can be used to service +** the watchdog to prevent a watchdog reset. +** \return none. +** +****************************************************************************************/ +void CopServiceHook(void) +{ +} /*** end of CopServiceHook ***/ +#endif /* BOOT_COP_HOOKS_ENABLE > 0 */ + + +/**************************************************************************************** +* F I L E S Y S T E M I N T E R F A C E H O O K F U N C T I O N S +****************************************************************************************/ + +#if (BOOT_FILE_SYS_ENABLE > 0) + +/**************************************************************************************** +* Constant data declarations +****************************************************************************************/ +/** \brief Firmware filename. */ +static const blt_char firmwareFilename[] = "/demoprog_olimex_stm32p103.srec"; + + +/**************************************************************************************** +* Local data declarations +****************************************************************************************/ +#if (BOOT_FILE_LOGGING_ENABLE > 0) +/** \brief Data structure for grouping log-file related information. */ +static struct +{ + FIL handle; /**< FatFS handle to the log-file. */ + blt_bool canUse; /**< Flag to indicate if the log-file can be used. */ +} logfile; +#endif + + +/************************************************************************************//** +** \brief Callback that gets called to check whether a firmware update from +** local file storage should be started. This could for example be when +** a switch is pressed, when a certain file is found on the local file +** storage, etc. +** \return BLT_TRUE if a firmware update is requested, BLT_FALSE otherwise. +** +****************************************************************************************/ +blt_bool FileIsFirmwareUpdateRequestedHook(void) +{ + FILINFO fileInfoObject = { 0 }; /* needs to be zeroed according to f_stat docs */; + + /* Current example implementation looks for a predetermined firmware file on the + * SD-card. If the SD-card is accessible and the firmware file was found the firmware + * update is started. When successfully completed, the firmware file is deleted. + * During the firmware update, progress information is written to a file called + * bootlog.txt and additionally outputted on UART @57600 bps for debugging purposes. + */ + /* check if firmware file is present and SD-card is accessible */ + if (f_stat(firmwareFilename, &fileInfoObject) == FR_OK) + { + /* check if the filesize is valid and that it is not a directory */ + if ( (fileInfoObject.fsize > 0) && (!(fileInfoObject.fattrib & AM_DIR)) ) + { + /* all conditions are met to start a firmware update from local file storage */ + return BLT_TRUE; + } + } + /* still here so no firmware update request is pending */ + return BLT_FALSE; +} /*** end of FileIsFirmwareUpdateRequestedHook ***/ + + +/************************************************************************************//** +** \brief Callback to obtain the filename of the firmware file that should be +** used during the firmware update from the local file storage. This +** hook function is called at the beginning of the firmware update from +** local storage sequence. +** \return valid firmware filename with full path or BLT_NULL. +** +****************************************************************************************/ +const blt_char *FileGetFirmwareFilenameHook(void) +{ + return firmwareFilename; +} /*** end of FileGetFirmwareFilenameHook ***/ + + +#if (BOOT_FILE_STARTED_HOOK_ENABLE > 0) +/************************************************************************************//** +** \brief Callback that gets called to inform the application that a firmware +** update from local storage just started. +** \return none. +** +****************************************************************************************/ +void FileFirmwareUpdateStartedHook(void) +{ + #if (BOOT_FILE_LOGGING_ENABLE > 0) + /* create/overwrite the logfile */ + logfile.canUse = BLT_FALSE; + if (f_open(&logfile.handle, "/bootlog.txt", FA_CREATE_ALWAYS | FA_WRITE) == FR_OK) + { + logfile.canUse = BLT_TRUE; + } + #endif +} /*** end of FileFirmwareUpdateStartedHook ***/ +#endif /* BOOT_FILE_STARTED_HOOK_ENABLE > 0 */ + + +#if (BOOT_FILE_COMPLETED_HOOK_ENABLE > 0) +/************************************************************************************//** +** \brief Callback that gets called to inform the application that a firmware +** update was successfully completed. +** \return none. +** +****************************************************************************************/ +void FileFirmwareUpdateCompletedHook(void) +{ + #if (BOOT_FILE_LOGGING_ENABLE > 0) + blt_int32u timeoutTime; + + /* close the log file */ + if (logfile.canUse == BLT_TRUE) + { + f_close(&logfile.handle); + } + /* wait for all logging related transmission to complete with a maximum wait time of + * 100ms. + */ + timeoutTime = TimerGet() + 100; + while(USART_GetFlagStatus(USART2, USART_FLAG_TC) == RESET) + { + /* check for timeout */ + if (TimerGet() > timeoutTime) + { + break; + } + } + #endif + /* now delete the firmware file from the disk since the update was successful */ + f_unlink(firmwareFilename); +} /*** end of FileFirmwareUpdateCompletedHook ***/ +#endif /* BOOT_FILE_COMPLETED_HOOK_ENABLE > 0 */ + + +#if (BOOT_FILE_ERROR_HOOK_ENABLE > 0) +/************************************************************************************//** +** \brief Callback that gets called in case an error occurred during a firmware +** update. Refer to for a list of available error codes. +** \return none. +** +****************************************************************************************/ +void FileFirmwareUpdateErrorHook(blt_int8u error_code) +{ + #if (BOOT_FILE_LOGGING_ENABLE > 0) + /* error detected which stops the firmware update, so close the log file */ + if (logfile.canUse == BLT_TRUE) + { + f_close(&logfile.handle); + } + #endif +} /*** end of FileFirmwareUpdateErrorHook ***/ +#endif /* BOOT_FILE_ERROR_HOOK_ENABLE > 0 */ + + +#if (BOOT_FILE_LOGGING_ENABLE > 0) +/************************************************************************************//** +** \brief Callback that gets called each time new log information becomes +** available during a firmware update. +** \param info_string Pointer to a character array with the log entry info. +** \return none. +** +****************************************************************************************/ +void FileFirmwareUpdateLogHook(blt_char *info_string) +{ + /* write the string to the log file */ + if (logfile.canUse == BLT_TRUE) + { + if (f_puts(info_string, &logfile.handle) < 0) + { + logfile.canUse = BLT_FALSE; + f_close(&logfile.handle); + } + } + /* echo all characters in the string on UART */ + while(*info_string != '\0') + { + /* write character to transmit holding register */ + USART_SendData(USART2, *info_string); + /* wait for tx holding register to be empty */ + while(USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET); + /* point to the next character in the string */ + info_string++; + } +} /*** end of FileFirmwareUpdateLogHook ***/ +#endif /* BOOT_FILE_LOGGING_ENABLE > 0 */ + + +#endif /* BOOT_FILE_SYS_ENABLE > 0 */ + + +/**************************************************************************************** +* S E E D / K E Y S E C U R I T Y H O O K F U N C T I O N S +****************************************************************************************/ + +#if (BOOT_XCP_SEED_KEY_ENABLE > 0) +/************************************************************************************//** +** \brief Provides a seed to the XCP master that will be used for the key +** generation when the master attempts to unlock the specified resource. +** Called by the GET_SEED command. +** \param resource Resource that the seed if requested for (XCP_RES_XXX). +** \param seed Pointer to byte buffer wher the seed will be stored. +** \return Length of the seed in bytes. +** +****************************************************************************************/ +blt_int8u XcpGetSeedHook(blt_int8u resource, blt_int8u *seed) +{ + /* request seed for unlocking ProGraMming resource */ + if ((resource & XCP_RES_PGM) != 0) + { + seed[0] = 0x55; + } + + /* return seed length */ + return 1; +} /*** end of XcpGetSeedHook ***/ + + +/************************************************************************************//** +** \brief Called by the UNLOCK command and checks if the key to unlock the +** specified resource was correct. If so, then the resource protection +** will be removed. +** \param resource resource to unlock (XCP_RES_XXX). +** \param key pointer to the byte buffer holding the key. +** \param len length of the key in bytes. +** \return 1 if the key was correct, 0 otherwise. +** +****************************************************************************************/ +blt_int8u XcpVerifyKeyHook(blt_int8u resource, blt_int8u *key, blt_int8u len) +{ + /* suppress compiler warning for unused parameter */ + len = len; + + /* the example key algorithm in "FeaserKey.dll" works as follows: + * - PGM will be unlocked if key = seed - 1 + */ + + /* check key for unlocking ProGraMming resource */ + if ((resource == XCP_RES_PGM) && (key[0] == (0x55-1))) + { + /* correct key received for unlocking PGM resource */ + return 1; + } + + /* still here so key incorrect */ + return 0; +} /*** end of XcpVerifyKeyHook ***/ +#endif /* BOOT_XCP_SEED_KEY_ENABLE > 0 */ + + +/*********************************** end of hooks.c ************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.c new file mode 100644 index 00000000..0e8c3c43 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.c @@ -0,0 +1,784 @@ +/**************************************************************************//** + * @file core_cm3.c + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +__ASM void __CLREX(void) +{ + clrex +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +__ASM uint32_t __get_BASEPRI(void) +{ + mrs r0, basepri + bx lr +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +__ASM void __set_BASEPRI(uint32_t basePri) +{ + msr basepri, r0 + bx lr +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +__ASM uint32_t __get_FAULTMASK(void) +{ + mrs r0, faultmask + bx lr +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +__ASM void __set_FAULTMASK(uint32_t faultMask) +{ + msr faultmask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + __ASM("rbit r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +uint8_t __LDREXB(uint8_t *addr) +{ + __ASM("ldrexb r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + __ASM("ldrexh r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + __ASM("ldrex r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + __ASM("strexb r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + __ASM("strexh r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + __ASM("strex r0, r0, [r1]"); + __ASM("bx lr"); +} + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +uint32_t __get_BASEPRI(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +uint32_t __get_FAULTMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +uint8_t __LDREXB(uint8_t *addr) +{ + uint8_t result=0; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + uint16_t result=0; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexb %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexh %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.h new file mode 100644 index 00000000..2b6b51a7 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/CoreSupport/core_cm3.h @@ -0,0 +1,1818 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CM3_CORE_H__ +#define __CM3_CORE_H__ + +/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - Error 10: \n + * register uint32_t __regBasePri __asm("basepri"); \n + * Error 10: Expecting ';' + * . + * - Error 530: \n + * return(__regBasePri); \n + * Warning 530: Symbol '__regBasePri' (line 264) not initialized + * . + * - Error 550: \n + * __regBasePri = (basePri & 0x1ff); \n + * Warning 550: Symbol '__regBasePri' (line 271) not accessed + * . + * - Error 754: \n + * uint32_t RESERVED0[24]; \n + * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced + * . + * - Error 750: \n + * #define __CM3_CORE_H__ \n + * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced + * . + * - Error 528: \n + * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n + * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced + * . + * - Error 751: \n + * } InterruptType_Type; \n + * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + +/*lint -save */ +/*lint -e10 */ +/*lint -e530 */ +/*lint -e550 */ +/*lint -e754 */ +/*lint -e750 */ +/*lint -e528 */ +/*lint -e751 */ + + +/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM3_NVIC */ + + +/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM3_SCB */ + + +/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM3_SysTick */ + + +/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM + memory mapped structure for Instrumentation Trace Macrocell (ITM) + @{ + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ + __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ + __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +/*@}*/ /* end of group CMSIS_CM3_ITM */ + + +/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type + memory mapped structure for Interrupt Type + @{ + */ +typedef struct +{ + uint32_t RESERVED0; + __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ +#else + uint32_t RESERVED1; +#endif +} InterruptType_Type; + +/* Interrupt Controller Type Register Definitions */ +#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ +#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ +#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ + +#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ +#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ + +#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ +#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ +/*@}*/ /* end of group CMSIS_CM3_InterruptType */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) +/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU + memory mapped structure for Memory Protection Unit (MPU) + @{ + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ +#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ +#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ +#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ +#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ +#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ +#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@}*/ /* end of group CMSIS_CM3_MPU */ +#endif + + +/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ + + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev +#define __RBIT __rbit +#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) +#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) +#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) +#define __STREXB(value, ptr) __strex(value, ptr) +#define __STREXH(value, ptr) __strex(value, ptr) +#define __STREXW(value, ptr) __strex(value, ptr) + + +/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ +/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +extern void __CLREX(void); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +#define __CLREX __clrex + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & 1); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } +static __INLINE void __CLREX() { __ASM ("clrex"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ +/* intrinsic void __set_FAULTMASK(); */ +/* intrinsic void __get_FAULTMASK(); */ +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ +/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ +/* intrinsic unsigned long __LDREX(unsigned long *); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP() { __ASM volatile ("nop"); } +static __INLINE void __WFI() { __ASM volatile ("wfi"); } +static __INLINE void __WFE() { __ASM volatile ("wfe"); } +static __INLINE void __SEV() { __ASM volatile ("sev"); } +static __INLINE void __ISB() { __ASM volatile ("isb"); } +static __INLINE void __DSB() { __ASM volatile ("dsb"); } +static __INLINE void __DMB() { __ASM volatile ("dmb"); } +static __INLINE void __CLREX() { __ASM volatile ("clrex"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/** + * @brief Set the Priority Grouping in NVIC Interrupt Controller + * + * @param PriorityGroup is priority grouping field + * + * Set the priority grouping field using the required unlock sequence. + * The parameter priority_grouping is assigned to the field + * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + (0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + +/** + * @brief Get the Priority Grouping from NVIC Interrupt Controller + * + * @return priority grouping field + * + * Get the priority grouping from NVIC Interrupt Controller. + * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Read the active bit for an external interrupt + * + * @param IRQn The number of the interrupt for read active bit + * @return 1 = interrupt active, 0 = interrupt not active + * + * Read the active register in NVIC and returns 1 if its status is active, + * otherwise it returns 0. + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** + * @brief Encode the priority for an interrupt + * + * @param PriorityGroup The used priority group + * @param PreemptPriority The preemptive priority value (starting from 0) + * @param SubPriority The sub priority value (starting from 0) + * @return The encoded priority for the interrupt + * + * Encode the priority for an interrupt with the given priority group, + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The returned priority value can be used for NVIC_SetPriority(...) function + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** + * @brief Decode the priority of an interrupt + * + * @param Priority The priority for the interrupt + * @param PriorityGroup The used priority group + * @param pPreemptPriority The preemptive priority value (starting from 0) + * @param pSubPriority The sub priority value (starting from 0) + * + * Decode an interrupt priority value with the given priority group to + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The priority value can be retrieved with NVIC_GetPriority(...) function + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ + + + +/* ##################################### Debug In/Output function ########################################### */ + +/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface + Core Debug Interface containing: + - Core Debug Receive / Transmit Functions + - Core Debug Defines + - Core Debug Variables +*/ +/*@{*/ + +extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** + * @brief Outputs a character via the ITM channel 0 + * + * @param ch character to output + * @return character to output + * + * The function outputs a character via the ITM channel 0. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** + * @brief Inputs a character via variable ITM_RxBuffer + * + * @return received character, -1 = no character received + * + * The function inputs a character via variable ITM_RxBuffer. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE int ITM_ReceiveChar (void) { + int ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + * @brief Check if a character via variable ITM_RxBuffer is available + * + * @return 1 = character available, 0 = no character available + * + * The function checks variable ITM_RxBuffer whether a character is available or not. + * The function returns '1' if a character is available and '0' if no character is available. + */ +static __INLINE int ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ + + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_definitions */ + +#endif /* __CM3_CORE_H__ */ + +/*lint -restore */ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html new file mode 100644 index 00000000..b80f38df --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html @@ -0,0 +1,284 @@ + + + + + + + + + + + + +Release Notes for STM32F10x CMSIS + + + + + +

+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F10x CMSIS

+

Copyright 2011 STMicroelectronics

+

+
+

 

+ + + + + + +
+

Contents

+
    +
  1. STM32F10x CMSIS +update History
    2. +
  2. License
    3. +
+ +

STM32F10x CMSIS +update History


+

V3.5.0 / 11-March-2011

+

Main +Changes

+ +
    +
  • stm32f10x.h +and startup_stm32f10x_hd_vl.s files: remove the FSMC interrupt +definition for STM32F10x High-density Value line devices.
    +
    • +
  • system_stm32f10x.c file provided within the CMSIS folder.
    +
    • + +
+ +

3.4.0 +- 10/15/2010

+ +
    +
  1. General
    2. +
+ +
    +
  • Add support +for STM32F10x High-density Value line devices.
    • +
+
    +
  1. STM32F10x CMSIS Device Peripheral Access Layer
    2. +
+ + + +
    +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • Update to support High-density Value line devices
      • Add new define STM32F10X_HD_VL
        • +
      • RCC, AFIO, FSMC bits definition updated
        • +
      +
    • + + All +STM32 devices definitions are commented by default. User has to select the +appropriate device before starting else an error will be signaled on compile +time.
      • +
    • Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.
      • +
    • "bool" type removed.
      +
      • +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • +
      +
    • "system_stm32f10x.c" moved to to "STM32F10x_StdPeriph_Template" directory. This file is also moved to each example directory under "STM32F10x_StdPeriph_Examples".
      +
      • +
    • SystemInit_ExtMemCtl() function: update to support High-density Value line devices.
      • +
    • Add "VECT_TAB_SRAM" inside "system_stm32f10x.c" +to select if the user want to place the Vector Table in internal SRAM. +An additional define is also to specify the Vector Table offset "VECT_TAB_OFFSET".
      +
      • + +
    +
  • STM32F10x CMSIS startup files:startup_stm32f10x_xx.s
    • Add three +startup files for STM32 High-density Value line devices: + startup_stm32f10x_hd_vl.s
    +
+

3.3.0 +- 04/16/2010

+ +
  1. General
+
  • Add support +for STM32F10x XL-density devices.
  • Add startup files for TrueSTUDIO toolchain
  1. STM32F10x CMSIS Device Peripheral Access Layer
+ +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • Update to support XL-density devices
      • Add new define STM32F10X_XL
      • Add new IRQs for TIM9..14
      • Update FLASH_TypeDef structure
      • Add new IP instances TIM9..14
      • RCC, AFIO, DBGMCU bits definition updated
    • Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma "," at the end of enum list)
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • SystemInit_ExtMemCtl() function: update to support XL-density devices
    • SystemInit() function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions. 
      +
  • STM32F10x CMSIS startup files:
    • add three +startup files for STM32 XL-density devices: + startup_stm32f10x_xl.s
    • startup_stm32f10x_md_vl.s for RIDE7: add USART3 IRQ Handler (was missing in previous version)
    • Add startup files for TrueSTUDIO toolchain
+

3.2.0 +- 03/01/2010

+
    +
  1. General
    2. +
+
    + +
  • STM32F10x CMSIS files updated to CMSIS V1.30 release
    • +
  • Directory structure updated to be aligned with CMSIS V1.30
    +
    • +
  • Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices. 
    • + +
+
    +
  1. CMSIS Core Peripheral Access Layer
+ +
    +
  1. STM32F10x CMSIS Device Peripheral Access Layer
    2. + +
+ +
    + +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • +
      +
    • Update +the stm32f10x.h file to support new Value line devices features: CEC +peripheral, new General purpose timers TIM15, TIM16 and TIM17.
      • +
    • Peripherals Bits definitions updated to be in line with Value line devices available features.
      +
      • +
    • HSE_Value, +HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE, +HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy +purposes.
      +
      • +
    +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • +
      +
    • SystemFrequency variable name changed to SystemCoreClock
      +
      • +
    • Default + SystemCoreClock is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.
      +
      • +
    • All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.
      +
      • +
    • Additional function void SystemCoreClockUpdate (void) is provided.
      +
      • +
    +
  • STM32F10x CMSIS Startup files: startup_stm32f10x_xx.s
    • +
      +
    • Add new +startup files for STM32 Low-density Value line devices: + startup_stm32f10x_ld_vl.s
      • +
    • Add new startup +files for STM32 Medium-density Value line devices: + startup_stm32f10x_md_vl.s
      • +
    • SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.
      +To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file
      +
      • +
    • GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.
      +
      • +
    + +
+ +
    +
+

License

+

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

+

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

+

 

+
+
+

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h new file mode 100644 index 00000000..af0c7c9a --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h @@ -0,0 +1,8336 @@ +/** + ****************************************************************************** + * @file stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F10x Connectivity line, + * High density, High density value line, Medium density, + * Medium density Value line, Low density, Low density Value line + * and XL-density devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x + * @{ + */ + +#ifndef __STM32F10x_H +#define __STM32F10x_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ + /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ + /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ + /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ + /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ + /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */ + /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ + /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ +#endif +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 16 and 32 Kbytes. + - Low-density value line devices are STM32F100xx microcontrollers where the Flash + memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" +#endif + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined HSE_VALUE + #ifdef STM32F10X_CL + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #else + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* STM32F10X_CL */ +#endif /* HSE_VALUE */ + + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ + +#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ + +/** + * @brief STM32F10x Standard Peripheral Library version number + */ +#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F10X_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#ifdef STM32F10X_XL + #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ +#else + #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ +#endif /* STM32F10X_XL */ +#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + +#ifdef STM32F10X_LD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_LD */ + +#ifdef STM32F10X_LD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_LD_VL */ + +#ifdef STM32F10X_MD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_MD */ + +#ifdef STM32F10X_MD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_MD_VL */ + +#ifdef STM32F10X_HD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ + DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is + mapped at position 60 only if the MISC_REMAP bit in + the AFIO_MAPR2 register is set) */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_XL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_XL */ + +#ifdef STM32F10X_CL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +#endif /* STM32F10X_CL */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f10x.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */ +#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT +#define HSE_Value HSE_VALUE +#define HSI_Value HSI_VALUE +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DR1; + uint16_t RESERVED1; + __IO uint16_t DR2; + uint16_t RESERVED2; + __IO uint16_t DR3; + uint16_t RESERVED3; + __IO uint16_t DR4; + uint16_t RESERVED4; + __IO uint16_t DR5; + uint16_t RESERVED5; + __IO uint16_t DR6; + uint16_t RESERVED6; + __IO uint16_t DR7; + uint16_t RESERVED7; + __IO uint16_t DR8; + uint16_t RESERVED8; + __IO uint16_t DR9; + uint16_t RESERVED9; + __IO uint16_t DR10; + uint16_t RESERVED10; + __IO uint16_t RTCCR; + uint16_t RESERVED11; + __IO uint16_t CR; + uint16_t RESERVED12; + __IO uint16_t CSR; + uint16_t RESERVED13[5]; + __IO uint16_t DR11; + uint16_t RESERVED14; + __IO uint16_t DR12; + uint16_t RESERVED15; + __IO uint16_t DR13; + uint16_t RESERVED16; + __IO uint16_t DR14; + uint16_t RESERVED17; + __IO uint16_t DR15; + uint16_t RESERVED18; + __IO uint16_t DR16; + uint16_t RESERVED19; + __IO uint16_t DR17; + uint16_t RESERVED20; + __IO uint16_t DR18; + uint16_t RESERVED21; + __IO uint16_t DR19; + uint16_t RESERVED22; + __IO uint16_t DR20; + uint16_t RESERVED23; + __IO uint16_t DR21; + uint16_t RESERVED24; + __IO uint16_t DR22; + uint16_t RESERVED25; + __IO uint16_t DR23; + uint16_t RESERVED26; + __IO uint16_t DR24; + uint16_t RESERVED27; + __IO uint16_t DR25; + uint16_t RESERVED28; + __IO uint16_t DR26; + uint16_t RESERVED29; + __IO uint16_t DR27; + uint16_t RESERVED30; + __IO uint16_t DR28; + uint16_t RESERVED31; + __IO uint16_t DR29; + uint16_t RESERVED32; + __IO uint16_t DR30; + uint16_t RESERVED33; + __IO uint16_t DR31; + uint16_t RESERVED34; + __IO uint16_t DR32; + uint16_t RESERVED35; + __IO uint16_t DR33; + uint16_t RESERVED36; + __IO uint16_t DR34; + uint16_t RESERVED37; + __IO uint16_t DR35; + uint16_t RESERVED38; + __IO uint16_t DR36; + uint16_t RESERVED39; + __IO uint16_t DR37; + uint16_t RESERVED40; + __IO uint16_t DR38; + uint16_t RESERVED41; + __IO uint16_t DR39; + uint16_t RESERVED42; + __IO uint16_t DR40; + uint16_t RESERVED43; + __IO uint16_t DR41; + uint16_t RESERVED44; + __IO uint16_t DR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; +#ifndef STM32F10X_CL + CAN_FilterRegister_TypeDef sFilterRegister[14]; +#else + CAN_FilterRegister_TypeDef sFilterRegister[28]; +#endif /* STM32F10X_CL */ +} CAN_TypeDef; + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; + __IO uint8_t IDR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CR; +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + __IO uint32_t SR; +#endif +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +#ifdef STM32F10X_XL + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +#endif /* STM32F10X_XL */ +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; + __IO uint32_t SR2; + __IO uint32_t PMEM2; + __IO uint32_t PATT2; + uint32_t RESERVED0; + __IO uint32_t ECCR2; +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; + __IO uint32_t SR3; + __IO uint32_t PMEM3; + __IO uint32_t PATT3; + uint32_t RESERVED0; + __IO uint32_t ECCR3; +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t OAR1; + uint16_t RESERVED2; + __IO uint16_t OAR2; + uint16_t RESERVED3; + __IO uint16_t DR; + uint16_t RESERVED4; + __IO uint16_t SR1; + uint16_t RESERVED5; + __IO uint16_t SR2; + uint16_t RESERVED6; + __IO uint16_t CCR; + uint16_t RESERVED7; + __IO uint16_t TRISE; + uint16_t RESERVED8; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; + __IO uint32_t PR; + __IO uint32_t RLR; + __IO uint32_t SR; +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + +#ifdef STM32F10X_CL + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t RESERVED0; + __IO uint32_t CFGR2; +#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint16_t CRH; + uint16_t RESERVED0; + __IO uint16_t CRL; + uint16_t RESERVED1; + __IO uint16_t PRLH; + uint16_t RESERVED2; + __IO uint16_t PRLL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRH; + uint16_t RESERVED8; + __IO uint16_t ALRL; + uint16_t RESERVED9; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SR; + uint16_t RESERVED2; + __IO uint16_t DR; + uint16_t RESERVED3; + __IO uint16_t CRCPR; + uint16_t RESERVED4; + __IO uint16_t RXCRCR; + uint16_t RESERVED5; + __IO uint16_t TXCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SMCR; + uint16_t RESERVED2; + __IO uint16_t DIER; + uint16_t RESERVED3; + __IO uint16_t SR; + uint16_t RESERVED4; + __IO uint16_t EGR; + uint16_t RESERVED5; + __IO uint16_t CCMR1; + uint16_t RESERVED6; + __IO uint16_t CCMR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + __IO uint16_t CNT; + uint16_t RESERVED9; + __IO uint16_t PSC; + uint16_t RESERVED10; + __IO uint16_t ARR; + uint16_t RESERVED11; + __IO uint16_t RCR; + uint16_t RESERVED12; + __IO uint16_t CCR1; + uint16_t RESERVED13; + __IO uint16_t CCR2; + uint16_t RESERVED14; + __IO uint16_t CCR3; + uint16_t RESERVED15; + __IO uint16_t CCR4; + uint16_t RESERVED16; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DCR; + uint16_t RESERVED18; + __IO uint16_t DMAR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; + uint16_t RESERVED0; + __IO uint16_t DR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CR1; + uint16_t RESERVED3; + __IO uint16_t CR2; + uint16_t RESERVED4; + __IO uint16_t CR3; + uint16_t RESERVED5; + __IO uint16_t GTPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFR; + __IO uint32_t SR; +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ + +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define CEC_BASE (APB1PERIPH_BASE + 0x7800) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00) +#define TIM10_BASE (APB2PERIPH_BASE + 0x5000) +#define TIM11_BASE (APB2PERIPH_BASE + 0x5400) + +#define SDIO_BASE (PERIPH_BASE + 0x18000) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ +#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define BKP ((BKP_TypeDef *) BKP_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define AFIO ((AFIO_TypeDef *) AFIO_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ + + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ +#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ +#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ +#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ +#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ +#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ +#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ +#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ + +#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ +#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ +#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ +#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ +#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ + +#ifdef STM32F10X_CL + #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ + #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ + #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ + #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +#ifdef STM32F10X_CL + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ + #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ + + #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ + #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ + #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ + #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#else + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#endif /* STM32F10X_CL */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +#ifdef STM32F10X_CL + #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ + #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ + #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ + #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ + #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ + #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ +#endif /* STM32F10X_CL */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */ +#endif + +#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ + #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */ + #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */ + #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */ + #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */ +#endif /* STM32F10X_XL */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ +#endif + +#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ + #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ + #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ + #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ + #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ +#endif /* STM32F10X_XL */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL) + #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ + #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ +#endif + +#ifdef STM32F10X_CL + #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ + #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ + #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ + #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */ +#endif + +#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ + #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */ + #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */ + #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */ + #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */ +#endif + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ +#endif + +#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ + #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ + #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ + #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ + #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */ +#endif + +#ifdef STM32F10X_HD_VL + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_CL + #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ +#endif /* STM32F10X_XL */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ +#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +#ifdef STM32F10X_CL +/******************* Bit definition for RCC_AHBRSTR register ****************/ + #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ + #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ + #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ + #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ + #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ + #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ + #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ + #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ + #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ + #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ + #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ + #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ + #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ + #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ + #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ + #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ + #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ + #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ + #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ + #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ + #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ + #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ + #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ + #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ + #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ + #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ + #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ + + #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ + #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ +#endif + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ +#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ +#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ +#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ + +#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ + +#ifdef STM32F10X_CL +/*!< ETH_REMAP configuration */ + #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ + #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ + #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ + #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ + #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ + #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ +#endif + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */ +#endif + +#ifdef STM32F10X_HD_VL +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */ +#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */ +#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */ +#endif + +#ifdef STM32F10X_XL +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#endif + +/******************************************************************************/ +/* */ +/* SystemTick */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR1 register *******************/ +#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ +#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR2 register *******************/ +#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR3 register *******************/ +#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/*!<****************** Bit definition for DMA_CCR4 register *******************/ +#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CCR5 register *******************/ +#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/******************* Bit definition for DMA_CCR6 register *******************/ +#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR7 register *******************/ +#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR7_PSIZE , ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/****************** Bit definition for DMA_CNDTR1 register ******************/ +#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR2 register ******************/ +#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR3 register ******************/ +#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR4 register ******************/ +#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR5 register ******************/ +#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR6 register ******************/ +#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR7 register ******************/ +#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR1 register *******************/ +#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR2 register *******************/ +#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR3 register *******************/ +#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR4 register *******************/ +#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR5 register *******************/ +#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR6 register *******************/ +#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR7 register *******************/ +#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR1 register *******************/ +#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR2 register *******************/ +#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR3 register *******************/ +#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + + +/****************** Bit definition for DMA_CMAR4 register *******************/ +#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR5 register *******************/ +#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR6 register *******************/ +#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR7 register *******************/ +#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */ +#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */ +#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */ +#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */ +#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */ + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ +#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ +#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ +#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ +#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ +#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ +#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ +#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ + +#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */ +#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ +#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ + + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ +#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ +#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */ +#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */ +#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ +#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ + +#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */ +#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */ + +#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ +#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */ +#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */ +#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */ +#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */ +#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ +#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ +#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */ + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */ +#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */ +#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */ + +#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */ +#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */ +#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */ +#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */ +#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */ +#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */ +#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */ +#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */ +#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */ +#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */ +#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */ +#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */ +#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */ +#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */ + +#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */ + +#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */ + +#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */ +#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */ + +#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */ + +#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */ + +#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */ +#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */ +#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */ +#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */ +#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */ +#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */ +#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */ +#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */ +#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */ +#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */ +#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */ +#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */ +#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */ +#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */ +#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */ +#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */ + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */ + +#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */ +#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */ +#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */ +#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */ +#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */ + +#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */ +#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */ + +/******************************************************************************/ +/* */ +/* Real-Time Clock */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for RTC_CRH register ********************/ +#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */ +#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */ +#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */ + +/******************* Bit definition for RTC_CRL register ********************/ +#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */ +#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */ +#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */ +#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */ +#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */ +#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */ + +/******************* Bit definition for RTC_PRLH register *******************/ +#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */ + +/******************* Bit definition for RTC_PRLL register *******************/ +#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */ + +/******************* Bit definition for RTC_DIVH register *******************/ +#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */ + +/******************* Bit definition for RTC_DIVL register *******************/ +#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */ + +/******************* Bit definition for RTC_CNTH register *******************/ +#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */ + +/******************* Bit definition for RTC_CNTL register *******************/ +#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */ + +/******************* Bit definition for RTC_ALRH register *******************/ +#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */ + +/******************* Bit definition for RTC_ALRL register *******************/ +#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */ +#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */ +#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */ +#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */ +#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */ +#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */ +#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */ + +#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */ +#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */ + +#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Flexible Static Memory Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for FSMC_BCR1 register *******************/ +#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR2 register *******************/ +#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR3 register *******************/ +#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */ +#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR4 register *******************/ +#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BTR1 register ******************/ +#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR2 register *******************/ +#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/******************* Bit definition for FSMC_BTR3 register *******************/ +#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR4 register *******************/ +#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR1 register ******************/ +#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR2 register ******************/ +#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/ +#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR3 register ******************/ +#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR4 register ******************/ +#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_PCR2 register *******************/ +#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */ +#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR3 register *******************/ +#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR4 register *******************/ +#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/******************* Bit definition for FSMC_SR2 register *******************/ +#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR3 register *******************/ +#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR4 register *******************/ +#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/****************** Bit definition for FSMC_PMEM2 register ******************/ +#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */ +#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */ +#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */ +#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ +#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM3 register ******************/ +#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */ +#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */ +#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */ +#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ +#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM4 register ******************/ +#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */ +#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */ +#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */ +#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ +#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT2 register ******************/ +#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */ +#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ +#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ +#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ +#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT3 register ******************/ +#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */ +#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ +#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ +#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ +#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT4 register ******************/ +#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */ +#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ +#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ +#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ +#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PIO4 register *******************/ +#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */ +#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */ +#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */ +#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ +#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_ECCR2 register ******************/ +#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/****************** Bit definition for FSMC_ECCR3 register ******************/ +#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/******************************************************************************/ +/* */ +/* SD host Interface */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for SDIO_POWER register ******************/ +#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */ +#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */ + +/****************** Bit definition for SDIO_CLKCR register ******************/ +#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */ +#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */ +#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */ +#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */ + +#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ +#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */ +#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */ + +#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */ +#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */ + +/******************* Bit definition for SDIO_ARG register *******************/ +#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */ + +/******************* Bit definition for SDIO_CMD register *******************/ +#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */ + +#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */ +#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */ +#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */ + +#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */ +#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ +#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */ +#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */ +#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */ +#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */ +#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */ + +/***************** Bit definition for SDIO_RESPCMD register *****************/ +#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */ + +/****************** Bit definition for SDIO_RESP0 register ******************/ +#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP1 register ******************/ +#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP2 register ******************/ +#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP3 register ******************/ +#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP4 register ******************/ +#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_DTIMER register *****************/ +#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */ + +/****************** Bit definition for SDIO_DLEN register *******************/ +#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */ + +/****************** Bit definition for SDIO_DCTRL register ******************/ +#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */ +#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */ +#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */ +#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */ + +#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */ +#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */ +#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */ +#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */ +#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */ + +/****************** Bit definition for SDIO_DCOUNT register *****************/ +#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */ + +/****************** Bit definition for SDIO_STA register ********************/ +#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */ +#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */ +#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */ +#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */ +#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */ +#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */ +#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */ +#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */ +#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */ +#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */ +#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */ +#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */ +#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */ +#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */ +#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ +#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ +#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */ +#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */ +#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */ +#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */ +#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */ +#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */ +#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */ +#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */ + +/******************* Bit definition for SDIO_ICR register *******************/ +#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */ +#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */ +#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */ +#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */ +#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */ +#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */ +#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */ +#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */ +#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */ +#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */ +#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */ +#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */ +#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */ + +/****************** Bit definition for SDIO_MASK register *******************/ +#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */ +#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */ +#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */ +#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */ +#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */ +#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */ +#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */ +#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */ +#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */ +#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */ +#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */ +#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */ +#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */ +#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */ +#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */ +#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */ +#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */ +#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */ +#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */ +#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */ +#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */ +#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */ + +/***************** Bit definition for SDIO_FIFOCNT register *****************/ +#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */ + +/****************** Bit definition for SDIO_FIFO register *******************/ +#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */ + +/******************************************************************************/ +/* */ +/* USB Device FS */ +/* */ +/******************************************************************************/ + +/*!< Endpoint-specific registers */ +/******************* Bit definition for USB_EP0R register *******************/ +#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP1R register *******************/ +#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP2R register *******************/ +#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP3R register *******************/ +#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP4R register *******************/ +#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP5R register *******************/ +#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP6R register *******************/ +#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP7R register *******************/ +#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/*!< Common registers */ +/******************* Bit definition for USB_CNTR register *******************/ +#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */ +#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */ +#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */ +#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */ +#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */ +#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */ + +/******************* Bit definition for USB_ISTR register *******************/ +#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */ +#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */ +#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */ +#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */ +#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */ +#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */ +#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */ +#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */ +#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */ + +/******************* Bit definition for USB_FNR register ********************/ +#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */ +#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */ +#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */ +#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */ +#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */ + +/****************** Bit definition for USB_DADDR register *******************/ +#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */ +#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */ +#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */ +#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */ +#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */ +#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */ +#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */ +#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */ + +/****************** Bit definition for USB_BTABLE register ******************/ +#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */ + +/*!< Buffer descriptor table */ +/***************** Bit definition for USB_ADDR0_TX register *****************/ +#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_TX register *****************/ +#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_TX register *****************/ +#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_TX register *****************/ +#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_TX register *****************/ +#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_TX register *****************/ +#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_TX register *****************/ +#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_TX register *****************/ +#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_TX register ****************/ +#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */ + +/***************** Bit definition for USB_COUNT1_TX register ****************/ +#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */ + +/***************** Bit definition for USB_COUNT2_TX register ****************/ +#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */ + +/***************** Bit definition for USB_COUNT3_TX register ****************/ +#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */ + +/***************** Bit definition for USB_COUNT4_TX register ****************/ +#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */ + +/***************** Bit definition for USB_COUNT5_TX register ****************/ +#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */ + +/***************** Bit definition for USB_COUNT6_TX register ****************/ +#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */ + +/***************** Bit definition for USB_COUNT7_TX register ****************/ +#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ +#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ + +/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ +#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ + +/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ +#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ + +/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ +#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ + +/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ +#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ + +/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ +#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ + +/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ +#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ + +/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ +#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ + +/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ +#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ + +/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ +#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ + +/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ +#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ + +/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ +#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ + +/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ +#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ + +/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ +#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ + +/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ +#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ + +/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ +#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_ADDR0_RX register *****************/ +#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_RX register *****************/ +#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_RX register *****************/ +#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_RX register *****************/ +#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_RX register *****************/ +#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_RX register *****************/ +#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_RX register *****************/ +#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_RX register *****************/ +#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_RX register ****************/ +#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT1_RX register ****************/ +#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT2_RX register ****************/ +#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT3_RX register ****************/ +#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT4_RX register ****************/ +#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT5_RX register ****************/ +#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT6_RX register ****************/ +#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT7_RX register ****************/ +#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ +#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ +#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ +#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ +#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ +#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ +#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ +#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ +#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ +#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ +#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ +#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ +#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ +#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ +#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ +#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ +#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ + +/*!< CAN control and status registers */ +/******************* Bit definition for CAN_MCR register ********************/ +#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */ +#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */ +#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */ +#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */ +#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */ +#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */ +#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */ +#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */ +#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */ + +/******************* Bit definition for CAN_MSR register ********************/ +#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */ +#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */ +#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */ +#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */ +#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */ +#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */ +#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */ +#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */ +#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */ + +/******************* Bit definition for CAN_TSR register ********************/ +#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */ +#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */ +#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */ +#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */ +#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */ +#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */ +#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */ +#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */ +#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */ +#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */ +#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */ +#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */ +#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */ +#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */ +#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */ +#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */ + +#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */ +#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */ +#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */ +#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */ + +#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */ +#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */ + +/******************* Bit definition for CAN_RF0R register *******************/ +#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */ +#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */ +#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */ +#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */ + +/******************* Bit definition for CAN_RF1R register *******************/ +#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */ +#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */ +#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */ +#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */ + +/******************** Bit definition for CAN_IER register *******************/ +#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */ +#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */ +#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */ +#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */ +#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */ +#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */ +#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */ +#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */ + +/******************** Bit definition for CAN_ESR register *******************/ +#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */ +#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */ +#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ + +#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */ +#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */ +#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */ + +/******************* Bit definition for CAN_BTR register ********************/ +#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */ +#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */ +#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */ +#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */ +#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */ +#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */ + +/*!< Mailbox registers */ +/****************** Bit definition for CAN_TI0R register ********************/ +#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/****************** Bit definition for CAN_TDT0R register *******************/ +#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/****************** Bit definition for CAN_TDL0R register *******************/ +#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/****************** Bit definition for CAN_TDH0R register *******************/ +#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI1R register *******************/ +#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT1R register ******************/ +#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL1R register ******************/ +#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH1R register ******************/ +#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI2R register *******************/ +#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT2R register ******************/ +#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL2R register ******************/ +#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH2R register ******************/ +#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI0R register *******************/ +#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT0R register ******************/ +#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL0R register ******************/ +#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH0R register ******************/ +#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI1R register *******************/ +#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT1R register ******************/ +#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL1R register ******************/ +#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH1R register ******************/ +#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/*!< CAN filter registers */ +/******************* Bit definition for CAN_FMR register ********************/ +#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */ + +/******************* Bit definition for CAN_FM1R register *******************/ +#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */ +#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */ +#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */ +#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */ +#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */ +#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */ +#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */ +#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */ +#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */ +#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */ +#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */ +#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */ +#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */ +#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */ +#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */ + +/******************* Bit definition for CAN_FS1R register *******************/ +#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */ +#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */ +#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */ +#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */ +#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */ +#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */ +#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */ +#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */ +#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */ +#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */ +#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */ +#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */ +#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */ +#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */ +#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */ + +/****************** Bit definition for CAN_FFA1R register *******************/ +#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */ +#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */ +#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */ +#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */ +#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */ +#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */ +#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */ +#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */ +#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */ +#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */ +#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */ +#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */ +#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */ +#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */ +#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */ + +/******************* Bit definition for CAN_FA1R register *******************/ +#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */ +#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */ +#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */ +#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */ +#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */ +#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */ +#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */ +#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */ +#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */ +#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */ +#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */ +#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */ +#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */ +#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */ +#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */ + +/******************* Bit definition for CAN_F0R1 register *******************/ +#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R1 register *******************/ +#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R1 register *******************/ +#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R1 register *******************/ +#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R1 register *******************/ +#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R1 register *******************/ +#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R1 register *******************/ +#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R1 register *******************/ +#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R1 register *******************/ +#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R1 register *******************/ +#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R1 register ******************/ +#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R1 register ******************/ +#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R1 register ******************/ +#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R1 register ******************/ +#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F0R2 register *******************/ +#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R2 register *******************/ +#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R2 register *******************/ +#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R2 register *******************/ +#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R2 register *******************/ +#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R2 register *******************/ +#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R2 register *******************/ +#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R2 register *******************/ +#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R2 register *******************/ +#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R2 register *******************/ +#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R2 register ******************/ +#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R2 register ******************/ +#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R2 register ******************/ +#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R2 register ******************/ +#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */ +#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */ +#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */ + +#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */ +#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */ +#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */ + +#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */ +#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */ +#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */ +#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */ +#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */ +#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */ +#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */ +#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */ +#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */ +#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */ +#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */ +#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */ +#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */ +#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */ +#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CR1 register ********************/ +#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */ +#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */ +#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */ +#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */ +#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */ +#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */ +#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */ +#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */ +#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */ +#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */ +#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */ +#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */ +#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */ + +/******************* Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */ + +#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */ +#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */ +#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */ +#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */ +#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */ + +/******************* Bit definition for I2C_OAR1 register *******************/ +#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */ +#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */ + +#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */ +#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */ +#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */ + +#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OAR2 register *******************/ +#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */ +#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */ + +/******************** Bit definition for I2C_DR register ********************/ +#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */ + +/******************* Bit definition for I2C_SR1 register ********************/ +#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */ +#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */ +#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */ +#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */ +#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */ +#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */ +#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */ +#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */ +#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */ +#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */ +#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */ +#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */ +#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */ +#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */ + +/******************* Bit definition for I2C_SR2 register ********************/ +#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */ +#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */ +#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */ +#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */ +#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */ +#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */ +#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */ +#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */ + +/******************* Bit definition for I2C_CCR register ********************/ +#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */ +#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */ + +/****************** Bit definition for I2C_TRISE register *******************/ +#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for USART_SR register *******************/ +#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */ +#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */ +#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */ +#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */ +#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */ +#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */ +#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */ +#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */ +#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */ +#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */ + +/******************* Bit definition for USART_DR register *******************/ +#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */ +#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */ +#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */ +#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */ +#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */ +#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */ +#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */ +#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */ +#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */ +#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */ +#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */ +#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */ +#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */ +#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */ +#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */ +#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */ + +#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */ +#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */ +#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */ +#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */ +#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */ +#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */ +#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */ +#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/**************** Bit definition for DBGMCU_IDCODE register *****************/ +#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ + +#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ +#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/****************** Bit definition for DBGMCU_CR register *******************/ +#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ +#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ +#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ +#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ + +#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ +#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */ + +/******************************************************************************/ +/* */ +/* FLASH and Option Bytes Registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACR register ******************/ +#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */ +#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */ + +#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */ +#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */ +#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */ + +/****************** Bit definition for FLASH_KEYR register ******************/ +#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */ + +/***************** Bit definition for FLASH_OPTKEYR register ****************/ +#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */ + +/****************** Bit definition for FLASH_SR register *******************/ +#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */ +#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */ +#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */ +#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */ + +/******************* Bit definition for FLASH_CR register *******************/ +#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */ +#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */ +#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */ +#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */ +#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */ +#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */ +#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */ +#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */ +#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */ +#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */ + +/******************* Bit definition for FLASH_AR register *******************/ +#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */ +#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */ + +#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */ +#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */ +#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */ + +/****************** Bit definition for FLASH_WRPR register ******************/ +#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for FLASH_RDP register *******************/ +#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */ +#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */ + +/****************** Bit definition for FLASH_USER register ******************/ +#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */ +#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */ + +/****************** Bit definition for FLASH_Data0 register *****************/ +#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */ +#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_Data1 register *****************/ +#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */ +#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_WRP0 register ******************/ +#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP1 register ******************/ +#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP2 register ******************/ +#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP3 register ******************/ +#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +#ifdef STM32F10X_CL +/******************************************************************************/ +/* Ethernet MAC Registers bits definitions */ +/******************************************************************************/ +/* Bit definition for Ethernet MAC Control Register register */ +#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */ +#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */ +#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */ + #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */ + #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */ + #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */ + #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */ + #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */ + #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */ + #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */ + #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */ +#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */ +#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */ +#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */ +#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */ +#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */ +#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */ +#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */ +#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */ +#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling + a transmission attempt during retries after a collision: 0 =< r <2^k */ + #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */ + #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */ + #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */ + #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */ +#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */ +#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */ +#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */ + +/* Bit definition for Ethernet MAC Frame Filter Register */ +#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */ +#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */ +#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */ +#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */ +#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */ + #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */ + #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */ + #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */ +#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */ +#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */ +#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */ +#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */ +#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */ +#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */ + +/* Bit definition for Ethernet MAC Hash Table High Register */ +#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */ + +/* Bit definition for Ethernet MAC Hash Table Low Register */ +#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */ + +/* Bit definition for Ethernet MAC MII Address Register */ +#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */ +#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */ +#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */ + #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */ + #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */ + #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */ +#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */ +#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */ + +/* Bit definition for Ethernet MAC MII Data Register */ +#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */ + +/* Bit definition for Ethernet MAC Flow Control Register */ +#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */ +#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */ +#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */ + #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */ + #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */ + #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */ + #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */ +#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */ +#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */ +#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */ +#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */ + +/* Bit definition for Ethernet MAC VLAN Tag Register */ +#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */ +#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */ + +/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ +#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */ +/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers. + Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */ +/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask + Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask + Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask + Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask + Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - + RSVD - Filter1 Command - RSVD - Filter0 Command + Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset + Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16 + Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */ + +/* Bit definition for Ethernet MAC PMT Control and Status Register */ +#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */ +#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */ +#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */ +#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */ +#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */ +#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */ +#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */ + +/* Bit definition for Ethernet MAC Status Register */ +#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */ +#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */ +#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */ +#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */ +#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */ + +/* Bit definition for Ethernet MAC Interrupt Mask Register */ +#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */ +#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */ + +/* Bit definition for Ethernet MAC Address0 High Register */ +#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */ + +/* Bit definition for Ethernet MAC Address0 Low Register */ +#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */ + +/* Bit definition for Ethernet MAC Address1 High Register */ +#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */ + #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */ +#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address1 Low Register */ +#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */ + +/* Bit definition for Ethernet MAC Address2 High Register */ +#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address2 Low Register */ +#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */ + +/* Bit definition for Ethernet MAC Address3 High Register */ +#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */ + +/* Bit definition for Ethernet MAC Address3 Low Register */ +#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */ + +/******************************************************************************/ +/* Ethernet MMC Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet MMC Contol Register */ +#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */ +#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */ +#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */ +#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */ + +/* Bit definition for Ethernet MMC Receive Interrupt Register */ +#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Register */ +#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */ +#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */ +#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */ +#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */ +#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */ +#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */ + +/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */ +#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */ + +/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */ +#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */ + +/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */ +#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */ + +/******************************************************************************/ +/* Ethernet PTP Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet PTP Time Stamp Contol Register */ +#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */ +#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */ +#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */ +#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */ +#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */ +#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */ + +/* Bit definition for Ethernet PTP Sub-Second Increment Register */ +#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */ + +/* Bit definition for Ethernet PTP Time Stamp High Register */ +#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */ + +/* Bit definition for Ethernet PTP Time Stamp Low Register */ +#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */ +#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp High Update Register */ +#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Low Update Register */ +#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */ +#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Addend Register */ +#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */ + +/* Bit definition for Ethernet PTP Target Time High Register */ +#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */ + +/* Bit definition for Ethernet PTP Target Time Low Register */ +#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */ + +/******************************************************************************/ +/* Ethernet DMA Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet DMA Bus Mode Register */ +#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */ +#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */ +#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */ +#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */ + #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */ + #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */ + #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */ + #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */ +#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */ +#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ +#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */ + #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ + #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ + #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ + #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ +#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */ +#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */ +#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */ + +/* Bit definition for Ethernet DMA Transmit Poll Demand Register */ +#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */ + +/* Bit definition for Ethernet DMA Receive Poll Demand Register */ +#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */ + +/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */ +#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */ + +/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */ +#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */ + +/* Bit definition for Ethernet DMA Status Register */ +#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */ +#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */ +#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */ +#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */ + /* combination with EBS[2:0] for GetFlagStatus function */ + #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */ + #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */ + #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */ +#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */ + #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */ + #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */ + #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */ + #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */ + #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */ + #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */ +#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */ + #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */ + #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */ + #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */ + #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */ + #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */ + #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */ +#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */ +#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */ +#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */ +#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */ +#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */ +#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */ +#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */ +#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */ +#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */ +#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */ +#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */ +#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */ +#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */ +#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */ +#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */ + +/* Bit definition for Ethernet DMA Operation Mode Register */ +#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */ +#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */ +#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */ +#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */ +#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */ +#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */ + #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */ + #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */ + #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */ + #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */ + #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */ + #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */ + #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */ + #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */ +#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */ +#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */ +#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */ +#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */ + #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */ + #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */ + #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */ + #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */ +#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */ +#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */ + +/* Bit definition for Ethernet DMA Interrupt Enable Register */ +#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */ +#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */ +#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */ +#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */ +#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */ +#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */ +#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */ +#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */ +#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */ +#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */ +#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */ +#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */ +#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */ +#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */ +#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */ + +/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */ +#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */ +#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */ +#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */ +#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */ + +/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */ +#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */ +#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */ +#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */ +#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */ +#endif /* STM32F10X_CL */ + +/** + * @} + */ + + /** + * @} + */ + +#ifdef USE_STDPERIPH_DRIVER + #include "stm32f10x_conf.h" +#endif + +/** @addtogroup Exported_macro + * @{ + */ + +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_H */ + +/** + * @} + */ + + /** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c new file mode 100644 index 00000000..6fb4579e --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c @@ -0,0 +1,1094 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depedning on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + +#ifndef STM32F10X_CL + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#else + if (HSE_VALUE <= 24000000) + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; + } + else + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + } +#endif /* STM32F10X_CL */ +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); + + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); + + /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + +#else + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL7); +#else + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); +#else + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h new file mode 100644 index 00000000..739f3328 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F10X_H +#define __SYSTEM_STM32F10X_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F10x_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F10x_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F10X_H */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS debug support.htm b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS debug support.htm new file mode 100644 index 00000000..efda685b --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS debug support.htm @@ -0,0 +1,243 @@ + + + +CMSIS Debug Support + + + + + + + + +

CMSIS Debug Support

+ +
+ +

Cortex-M3 ITM Debug Access

+

+ The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that provides together with + the Serial Viewer Output trace capabilities for the microcontroller system. The ITM has + 32 communication channels which are able to transmit 32 / 16 / 8 bit values; two ITM + communication channels are used by CMSIS to output the following information: +

+
    +
  • ITM Channel 0: used for printf-style output via the debug interface.
    • +
  • ITM Channel 31: is reserved for RTOS kernel awareness debugging.
    • +
+ +

Debug IN / OUT functions

+

CMSIS provides following debug functions:

+
    +
  • ITM_SendChar (uses ITM channel 0)
    • +
  • ITM_ReceiveChar (uses global variable)
    • +
  • ITM_CheckChar (uses global variable)
    • +
+ +

ITM_SendChar

+

+ ITM_SendChar is used to transmit a character over ITM channel 0 from + the microcontroller system to the debug system.
+ Only a 8 bit value is transmitted. +

+
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  /* check if debugger connected and ITM channel enabled for tracing */
+  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA)  &&
+      (ITM->TCR & ITM_TCR_ITMENA)                  &&
+      (ITM->TER & (1UL << 0))  ) 
+  {
+    while (ITM->PORT[0].u32 == 0);
+    ITM->PORT[0].u8 = (uint8_t)ch;
+  }  
+  return (ch);
+}
+ +

ITM_ReceiveChar

+

+ ITM communication channel is only capable for OUT direction. For IN direction + a globel variable is used. A simple mechansim detects if a character is received. + The project to test need to be build with debug information. +

+ +

+ The globale variable ITM_RxBuffer is used to transmit a 8 bit value from debug system + to microcontroller system. ITM_RxBuffer is 32 bit wide to enshure a proper handshake. +

+
+extern volatile int ITM_RxBuffer;                    /* variable to receive characters                             */
+
+

+ A dedicated bit pattern is used to determin if ITM_RxBuffer is empty + or contains a valid value. +

+
+#define             ITM_RXBUFFER_EMPTY    0x5AA55AA5 /* value identifying ITM_RxBuffer is ready for next character */
+
+

+ ITM_ReceiveChar is used to receive a 8 bit value from the debug system. The function is nonblocking. + It returns the received character or '-1' if no character was available. +

+
+static __INLINE int ITM_ReceiveChar (void) {
+  int ch = -1;                               /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+  
+  return (ch); 
+}
+
+ +

ITM_CheckChar

+

+ ITM_CheckChar is used to check if a character is received. +

+
+static __INLINE int ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+ + +

ITM Debug Support in uVision

+

+ uVision uses in a debug session the Debug (printf) Viewer window to + display the debug data. +

+

Direction microcontroller system -> uVision:

+
    +
  • + Characters received via ITM communication channel 0 are written in a printf style + to Debug (printf) Viewer window. +
    • +
+ +

Direction uVision -> microcontroller system:

+
    +
  • Check if ITM_RxBuffer variable is available (only performed once).
    • +
  • Read character from Debug (printf) Viewer window.
    • +
  • If ITM_RxBuffer empty write character to ITM_RxBuffer.
    • +
+ +

Note

+
    +

  • Current solution does not use a buffer machanism for trasmitting the characters.

    +
    • +
+ +

RTX Kernel awareness in uVision

+

+ uVision / RTX are using a simple and efficient solution for RTX Kernel awareness. + No format overhead is necessary.
+ uVsion debugger decodes the RTX events via the 32 / 16 / 8 bit ITM write access + to ITM communication channel 31. +

+ +

Following RTX events are traced:

+
    +
  • Task Create / Delete event +
      +
    1. 32 bit access. Task start address is transmitted
      2. +
    2. 16 bit access. Task ID and Create/Delete flag are transmitted
      + High byte holds Create/Delete flag, Low byte holds TASK ID. +
      3. +
    +
    • +
  • Task switch event +
      +
    1. 8 bit access. Task ID of current task is transmitted
      2. +
    +
    • +
+ +

Note

+
    +

  • Other RTOS information could be retrieved via memory read access in a polling mode manner.

    +
    • +
+ + +

 

+ +
+ +

Copyright © KEIL - An ARM Company.
+All rights reserved.
+Visit our web site at www.keil.com. +

+ + + + \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS_changes.htm b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS_changes.htm new file mode 100644 index 00000000..162ffcc9 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/CMSIS_changes.htm @@ -0,0 +1,320 @@ + + + +CMSIS Changes + + + + + + + + +

Changes to CMSIS version V1.20

+ +
+ +

1. Removed CMSIS Middelware packages

+

+ CMSIS Middleware is on hold from ARM side until a agreement between all CMSIS partners is found. +

+ +

2. SystemFrequency renamed to SystemCoreClock

+

+ The variable name SystemCoreClock is more precise than SystemFrequency + because the variable holds the clock value at which the core is running. +

+ +

3. Changed startup concept

+

+ The old startup concept (calling SystemInit_ExtMemCtl from startup file and calling SystemInit + from main) has the weakness that it does not work for controllers which need a already + configuerd clock system to configure the external memory controller. +

+ +

Changed startup concept

+
    +
  • + SystemInit() is called from startup file before premain. +
    • +
  • + SystemInit() configures the clock system and also configures + an existing external memory controller. +
    • +
  • + SystemInit() must not use global variables. +
    • +
  • + SystemCoreClock is initialized with a correct predefined value. +
    • +
  • + Additional function void SystemCoreClockUpdate (void) is provided.
    + SystemCoreClockUpdate() updates the variable SystemCoreClock + and must be called whenever the core clock is changed.
    + SystemCoreClockUpdate() evaluates the clock register settings and calculates + the current core clock. +
    • +
+ + +

4. Advanced Debug Functions

+

+ ITM communication channel is only capable for OUT direction. To allow also communication for + IN direction a simple concept is provided. +

+
    +
  • + Global variable volatile int ITM_RxBuffer used for IN data. +
    • +
  • + Function int ITM_CheckChar (void) checks if a new character is available. +
    • +
  • + Function int ITM_ReceiveChar (void) retrieves the new character. +
    • +
+ +

+ For detailed explanation see file CMSIS debug support.htm. +

+ + +

5. Core Register Bit Definitions

+

+ Files core_cm3.h and core_cm0.h contain now bit definitions for Core Registers. The name for the + defines correspond with the Cortex-M Technical Reference Manual. +

+

+ e.g. SysTick structure with bit definitions +

+
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+  memory mapped structure for SysTick
+  @{
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                         /*!< Offset: 0x00  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                         /*!< Offset: 0x04  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                          /*!< Offset: 0x08  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                        /*!< Offset: 0x0C  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1ul << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1ul << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1ul << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1ul << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1ul << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1ul << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */
+ +

7. DoxyGen Tags

+

+ DoxyGen tags in files core_cm3.[c,h] and core_cm0.[c,h] are reworked to create proper documentation + using DoxyGen. +

+ +

8. Folder Structure

+

+ The folder structure is changed to differentiate the single support packages. +

+ +
    +
  • CM0
    • +
  • CM3 +
      +
    • CoreSupport
      • +
    • DeviceSupport
      • +
        +
      • Vendor +
          +
        • Device +
            +
          • Startup +
              +
            • Toolchain
              • +
            • Toolchain
              • +
            • ...
              • +
            +
            • +
          +
          • +
        • Device
          • +
        • ...
          • +
        +
        • +
      • Vendor
        • +
      • ...
        • +
      + +
    • Example +
        +
      • Toolchain +
          +
        • Device
          • +
        • Device
          • +
        • ...
          • +
        +
        • +
      • Toolchain
        • +
      • ...
        • +
      +
      • +
    +
    • + +
  • Documentation
    • +
+ +

9. Open Points

+

+ Following points need to be clarified and solved: +

+
    +
  • +

    + Equivalent C and Assembler startup files. +

    +

    + Is there a need for having C startup files although assembler startup files are + very efficient and do not need to be changed? +

    +

    • +
  • +

    + Placing of HEAP in external RAM. +

    +

    + It must be possible to place HEAP in external RAM if the device supports an + external memory controller. +

    +
    • +
  • +

    + Placing of STACK /HEAP. +

    +

    + STACK should always be placed at the end of internal RAM. +

    +

    + If HEAP is placed in internal RAM than it should be placed after RW ZI section. +

    +
    • +
  • +

    + Removing core_cm3.c and core_cm0.c. +

    +

    + On a long term the functions in core_cm3.c and core_cm0.c must be replaced with + appropriate compiler intrinsics. +

    +
    • +
+ + +

10. Limitations

+

+ The following limitations are not covered with the current CMSIS version: +

+
    +
  • + No C startup files for ARM toolchain are provided. +
    • +
  • + No C startup files for GNU toolchain are provided. +
    • +
  • + No C startup files for IAR toolchain are provided. +
    • +
  • + No Tasking projects are provided yet. +
    • +
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/Documentation/CMSIS_Core.htm b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/Documentation/CMSIS_Core.htm new file mode 100644 index 00000000..6fd131e1 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/Documentation/CMSIS_Core.htm @@ -0,0 +1,1337 @@ + + + + CMSIS: Cortex Microcontroller Software Interface Standard + + + +

Cortex Microcontroller Software Interface Standard

+ +

This file describes the Cortex Microcontroller Software Interface Standard (CMSIS).

+

Version: 1.30 - 30. October 2009

+ +

Information in this file, the accompany manuals, and software is
+ Copyright © ARM Ltd.
All rights reserved. +

+ +
+ +

Revision History

+
    +
  • Version 1.00: initial release.
    • +
  • Version 1.01: added __LDREXx, __STREXx, and __CLREX.
    • +
  • Version 1.02: added Cortex-M0.
    • +
  • Version 1.10: second review.
    • +
  • Version 1.20: third review.
    • +
  • Version 1.30 PRE-RELEASE: reworked Startup Concept, additional Debug Functionality.
    • +
  • Version 1.30 2nd PRE-RELEASE: changed folder structure, added doxyGen comments, added Bit definitions.
    • +
  • Version 1.30: updated Device Support Packages.
    • +
+ +
+ +

Contents

+ +
    +
  1. About
    2. +
  2. Coding Rules and Conventions
    3. +
  3. CMSIS Files
    4. +
  4. Core Peripheral Access Layer
    5. +
  5. CMSIS Example
    6. +
+ +

About

+ +

+ The Cortex Microcontroller Software Interface Standard (CMSIS) answers the challenges + that are faced when software components are deployed to physical microcontroller devices based on a + Cortex-M0 or Cortex-M3 processor. The CMSIS will be also expanded to future Cortex-M + processor cores (the term Cortex-M is used to indicate that). The CMSIS is defined in close co-operation + with various silicon and software vendors and provides a common approach to interface to peripherals, + real-time operating systems, and middleware components. +

+ +

ARM provides as part of the CMSIS the following software layers that are +available for various compiler implementations:

+
    +
  • Core Peripheral Access Layer: contains name definitions, + address definitions and helper functions to + access core registers and peripherals. It defines also a device + independent interface for RTOS Kernels that includes debug channel + definitions.
    • +
+ +

These software layers are expanded by Silicon partners with:

+
    +
  • Device Peripheral Access Layer: provides definitions + for all device peripherals
    • +
  • Access Functions for Peripherals (optional): provides + additional helper functions for peripherals
    • +
+ +

CMSIS defines for a Cortex-M Microcontroller System:

+
    +
  • A common way to access peripheral registers + and a common way to define exception vectors.
    • +
  • The register names of the Core + Peripherals and the names of the Core + Exception Vectors.
    • +
  • An device independent interface for RTOS Kernels including a debug + channel.
    • +
+ +

+ By using CMSIS compliant software components, the user can easier re-use template code. + CMSIS is intended to enable the combination of software components from multiple middleware vendors. +

+ +

Coding Rules and Conventions

+ +

+ The following section describes the coding rules and conventions used in the CMSIS + implementation. It contains also information about data types and version number information. +

+ +

Essentials

+
    +
  • The CMSIS C code conforms to MISRA 2004 rules. In case of MISRA violations, + there are disable and enable sequences for PC-LINT inserted.
    • +
  • ANSI standard data types defined in the ANSI C header file + <stdint.h> are used.
    • +
  • #define constants that include expressions must be enclosed by + parenthesis.
    • +
  • Variables and parameters have a complete data type.
    • +
  • All functions in the Core Peripheral Access Layer are + re-entrant.
    • +
  • The Core Peripheral Access Layer has no blocking code + (which means that wait/query loops are done at other software layers).
    • +
  • For each exception/interrupt there is definition for: +
      +
    • an exception/interrupt handler with the postfix _Handler + (for exceptions) or _IRQHandler (for interrupts).
      • +
    • a default exception/interrupt handler (weak definition) that contains an endless loop.
      • +
    • a #define of the interrupt number with the postfix _IRQn.
      • +
    • +
+ +

Recommendations

+ +

The CMSIS recommends the following conventions for identifiers.

+
    +
  • CAPITAL names to identify Core Registers, Peripheral Registers, and CPU Instructions.
    • +
  • CamelCase names to identify peripherals access functions and interrupts.
    • +
  • PERIPHERAL_ prefix to identify functions that belong to specify peripherals.
    • +
  • Doxygen comments for all functions are included as described under Function Comments below.
    • +
+ +Comments + +
    +
  • Comments use the ANSI C90 style (/* comment */) or C++ style + (// comment). It is assumed that the programming tools support today + consistently the C++ comment style.
    • +
  • Function Comments provide for each function the following information: +
      +
    • one-line brief function overview.
      • +
    • detailed parameter explanation.
      • +
    • detailed information about return values.
      • +
    • detailed description of the actual function.
      • +
    +

    Doxygen Example:

    + 
    +/** 
+ * @brief  Enable Interrupt in NVIC Interrupt Controller
+ * @param  IRQn  interrupt number that specifies the interrupt
+ * @return none.
+ * Enable the specified interrupt in the NVIC Interrupt Controller.
+ * Other settings of the interrupt such as priority are not affected.
+ */
    +
    • +
+ +

Data Types and IO Type Qualifiers

+ +

+ The Cortex-M HAL uses the standard types from the standard ANSI C header file + <stdint.h>. IO Type Qualifiers are used to specify the access + to peripheral variables. IO Type Qualifiers are indented to be used for automatic generation of + debug information of peripheral registers. +

+ + + + + + + + + + + + + + + + + + + + + + + + +
IO Type Qualifier#defineDescription
__Ivolatile constRead access only
__OvolatileWrite access only
__IOvolatileRead and write access
+ +

CMSIS Version Number

+

+ File core_cm3.h contains the version number of the CMSIS with the following define: +

+ +
+#define __CM3_CMSIS_VERSION_MAIN  (0x01)      /* [31:16] main version       */
+#define __CM3_CMSIS_VERSION_SUB   (0x30)      /* [15:0]  sub version        */
+#define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB)
+ +

+ File core_cm0.h contains the version number of the CMSIS with the following define: +

+ +
+#define __CM0_CMSIS_VERSION_MAIN  (0x01)      /* [31:16] main version       */
+#define __CM0_CMSIS_VERSION_SUB   (0x30)      /* [15:0]  sub version        */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB)
+ + +

CMSIS Cortex Core

+

+ File core_cm3.h contains the type of the CMSIS Cortex-M with the following define: +

+ +
+#define __CORTEX_M                (0x03)
+ +

+ File core_cm0.h contains the type of the CMSIS Cortex-M with the following define: +

+ +
+#define __CORTEX_M                (0x00)
+ + +

CMSIS Files

+

+ This section describes the Files provided in context with the CMSIS to access the Cortex-M + hardware and peripherals. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FileProviderDescription
device.hDevice specific (provided by silicon partner)Defines the peripherals for the actual device. The file may use + several other include files to define the peripherals of the actual device.
core_cm0.hARM (for RealView ARMCC, IAR, and GNU GCC)Defines the core peripherals for the Cortex-M0 CPU and core peripherals.
core_cm3.hARM (for RealView ARMCC, IAR, and GNU GCC)Defines the core peripherals for the Cortex-M3 CPU and core peripherals.
core_cm0.cARM (for RealView ARMCC, IAR, and GNU GCC)Provides helper functions that access core registers.
core_cm3.cARM (for RealView ARMCC, IAR, and GNU GCC)Provides helper functions that access core registers.
startup_deviceARM (adapted by compiler partner / silicon partner)Provides the Cortex-M startup code and the complete (device specific) Interrupt Vector Table
system_deviceARM (adapted by silicon partner)Provides a device specific configuration file for the device. It configures the device initializes + typically the oscillator (PLL) that is part of the microcontroller device
+ +

device.h

+ +

+ The file device.h is provided by the silicon vendor and is the + central include file that the application programmer is using in + the C source code. This file contains: +

+
    +
  • +

    Interrupt Number Definition: provides interrupt numbers + (IRQn) for all core and device specific exceptions and interrupts.

    +
    • +
  • +

    Configuration for core_cm0.h / core_cm3.h: reflects the + actual configuration of the Cortex-M processor that is part of the actual + device. As such the file core_cm0.h / core_cm3.h is included that + implements access to processor registers and core peripherals.

    +
    • +
  • +

    Device Peripheral Access Layer: provides definitions + for all device peripherals. It contains all data structures and the address + mapping for the device specific peripherals.

    +
    • +
  • Access Functions for Peripherals (optional): provides + additional helper functions for peripherals that are useful for programming + of these peripherals. Access Functions may be provided as inline functions + or can be extern references to a device specific library provided by the + silicon vendor.
    • +
+ + +

Interrupt Number Definition

+ +

To access the device specific interrupts the device.h file defines IRQn +numbers for the complete device using a enum typedef as shown below:

+
+typedef enum IRQn
+{
+/******  Cortex-M3 Processor Exceptions/Interrupt Numbers ************************************************/
+  NonMaskableInt_IRQn             = -14,      /*!< 2 Non Maskable Interrupt                              */
+  HardFault_IRQn                  = -13,      /*!< 3 Cortex-M3 Hard Fault Interrupt                      */
+  MemoryManagement_IRQn           = -12,      /*!< 4 Cortex-M3 Memory Management Interrupt               */
+  BusFault_IRQn                   = -11,      /*!< 5 Cortex-M3 Bus Fault Interrupt                       */
+  UsageFault_IRQn                 = -10,      /*!< 6 Cortex-M3 Usage Fault Interrupt                     */
+  SVCall_IRQn                     = -5,       /*!< 11 Cortex-M3 SV Call Interrupt                        */
+  DebugMonitor_IRQn               = -4,       /*!< 12 Cortex-M3 Debug Monitor Interrupt                  */
+  PendSV_IRQn                     = -2,       /*!< 14 Cortex-M3 Pend SV Interrupt                        */
+  SysTick_IRQn                    = -1,       /*!< 15 Cortex-M3 System Tick Interrupt                    */
+/******  STM32 specific Interrupt Numbers ****************************************************************/
+  WWDG_STM_IRQn                   = 0,        /*!< Window WatchDog Interrupt                             */
+  PVD_STM_IRQn                    = 1,        /*!< PVD through EXTI Line detection Interrupt             */
+  :
+  :
+  } IRQn_Type;
+ + +

Configuration for core_cm0.h / core_cm3.h

+

+ The Cortex-M core configuration options which are defined for each device implementation. Some + configuration options are reflected in the CMSIS layer using the #define settings described below. +

+

+ To access core peripherals file device.h includes file core_cm0.h / core_cm3.h. + Several features in core_cm0.h / core_cm3.h are configured by the following defines that must be + defined before #include <core_cm0.h> / #include <core_cm3.h> + preprocessor command. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
#defineFileValueDescription
__NVIC_PRIO_BITScore_cm0.h(2)Number of priority bits implemented in the NVIC (device specific)
__NVIC_PRIO_BITScore_cm3.h(2 ... 8)Number of priority bits implemented in the NVIC (device specific)
__MPU_PRESENTcore_cm0.h, core_cm3.h(0, 1)Defines if an MPU is present or not
__Vendor_SysTickConfigcore_cm0.h, core_cm3.h(1)When this define is setup to 1, the SysTickConfig function + in core_cm3.h is excluded. In this case the device.h + file must contain a vendor specific implementation of this function.
+ + +

Device Peripheral Access Layer

+

+ Each peripheral uses a prefix which consists of <device abbreviation>_ + and <peripheral name>_ to identify peripheral registers that access this + specific peripheral. The intention of this is to avoid name collisions caused + due to short names. If more than one peripheral of the same type exists, + identifiers have a postfix (digit or letter). For example: +

+
    +
  • <device abbreviation>_UART_Type: defines the generic register layout for all UART channels in a device. + 
    +typedef struct
+{
+  union {
+  __I  uint8_t  RBR;                     /*!< Offset: 0x000   Receiver Buffer Register    */
+  __O  uint8_t  THR;                     /*!< Offset: 0x000   Transmit Holding Register   */
+  __IO uint8_t  DLL;                     /*!< Offset: 0x000   Divisor Latch LSB           */
+       uint32_t RESERVED0;
+  };
+  union {
+  __IO uint8_t  DLM;                     /*!< Offset: 0x004   Divisor Latch MSB           */
+  __IO uint32_t IER;                     /*!< Offset: 0x004   Interrupt Enable Register   */
+  };
+  union {
+  __I  uint32_t IIR;                     /*!< Offset: 0x008   Interrupt ID Register       */
+  __O  uint8_t  FCR;                     /*!< Offset: 0x008   FIFO Control Register       */
+  };
+  __IO uint8_t  LCR;                     /*!< Offset: 0x00C   Line Control Register       */
+       uint8_t  RESERVED1[7];
+  __I  uint8_t  LSR;                     /*!< Offset: 0x014   Line Status Register        */
+       uint8_t  RESERVED2[7];
+  __IO uint8_t  SCR;                     /*!< Offset: 0x01C   Scratch Pad Register        */
+       uint8_t  RESERVED3[3];
+  __IO uint32_t ACR;                     /*!< Offset: 0x020   Autobaud Control Register   */
+  __IO uint8_t  ICR;                     /*!< Offset: 0x024   IrDA Control Register       */
+       uint8_t  RESERVED4[3];
+  __IO uint8_t  FDR;                     /*!< Offset: 0x028   Fractional Divider Register */
+       uint8_t  RESERVED5[7];
+  __IO uint8_t  TER;                     /*!< Offset: 0x030   Transmit Enable Register    */
+       uint8_t  RESERVED6[39];
+  __I  uint8_t  FIFOLVL;                 /*!< Offset: 0x058   FIFO Level Register         */
+} LPC_UART_TypeDef;
    +
    • +
  • <device abbreviation>_UART1: is a pointer to a register structure that refers to a specific UART. + For example UART1->DR is the data register of UART1. + 
    +#define LPC_UART2             ((LPC_UART_TypeDef      *) LPC_UART2_BASE    )
+#define LPC_UART3             ((LPC_UART_TypeDef      *) LPC_UART3_BASE    )
    +
    • +
+ +
Minimal Requiements
+

+ To access the peripheral registers and related function in a device the files device.h + and core_cm0.h / core_cm3.h defines as a minimum: +

+
    +
  • The Register Layout Typedef for each peripheral that defines all register names. + Names that start with RESERVE are used to introduce space into the structure to adjust the addresses of + the peripheral registers. For example: + 
    +typedef struct {
+  __IO uint32_t CTRL;      /* SysTick Control and Status Register */
+  __IO uint32_t LOAD;      /* SysTick Reload Value Register       */
+  __IO uint32_t VAL;       /* SysTick Current Value Register      */
+  __I  uint32_t CALIB;     /* SysTick Calibration Register        */
+  } SysTick_Type;
    +
    • + +
  • + Base Address for each peripheral (in case of multiple peripherals + that use the same register layout typedef multiple base addresses are defined). For example: + 
    +#define SysTick_BASE (SCS_BASE + 0x0010)            /* SysTick Base Address */
    +
    • + +
  • + Access Definition for each peripheral (in case of multiple peripherals that use + the same register layout typedef multiple access definitions exist, i.e. LPC_UART0, + LPC_UART2). For Example: + 
    +#define SysTick ((SysTick_Type *) SysTick_BASE)     /* SysTick access definition */
    +
    • +
+ +

+ These definitions allow to access the peripheral registers from user code with simple assignments like: +

+
SysTick->CTRL = 0;
+ +
Optional Features
+

In addition the device.h file may define:

+
    +
  • + #define constants that simplify access to the peripheral registers. + These constant define bit-positions or other specific patterns are that required for the + programming of the peripheral registers. The identifiers used start with + <device abbreviation>_ and <peripheral name>_. + It is recommended to use CAPITAL letters for such #define constants. +
    • +
  • + Functions that perform more complex functions with the peripheral (i.e. status query before + a sending register is accessed). Again these function start with + <device abbreviation>_ and <peripheral name>_. +
    • +
+ +

core_cm0.h and core_cm0.c

+

+ File core_cm0.h describes the data structures for the Cortex-M0 core peripherals and does + the address mapping of this structures. It also provides basic access to the Cortex-M0 core registers + and core peripherals with efficient functions (defined as static inline). +

+

+ File core_cm0.c defines several helper functions that access processor registers. +

+

Together these files implement the Core Peripheral Access Layer for a Cortex-M0.

+ +

core_cm3.h and core_cm3.c

+

+ File core_cm3.h describes the data structures for the Cortex-M3 core peripherals and does + the address mapping of this structures. It also provides basic access to the Cortex-M3 core registers + and core peripherals with efficient functions (defined as static inline). +

+

+ File core_cm3.c defines several helper functions that access processor registers. +

+

Together these files implement the Core Peripheral Access Layer for a Cortex-M3.

+ +

startup_device

+

+ A template file for startup_device is provided by ARM for each supported + compiler. It is adapted by the silicon vendor to include interrupt vectors for all device specific + interrupt handlers. Each interrupt handler is defined as weak function + to an dummy handler. Therefore the interrupt handler can be directly used in application software + without any requirements to adapt the startup_device file. +

+

+ The following exception names are fixed and define the start of the vector table for a Cortex-M0: +

+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+ +

+ The following exception names are fixed and define the start of the vector table for a Cortex-M3: +

+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+ +

+ In the following examples for device specific interrupts are shown: +

+
+; External Interrupts
+                DCD     WWDG_IRQHandler           ; Window Watchdog
+                DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler         ; Tamper
+ +

+ Device specific interrupts must have a dummy function that can be overwritten in user code. + Below is an example for this dummy function. +

+
+Default_Handler PROC
+                EXPORT WWDG_IRQHandler   [WEAK]
+                EXPORT PVD_IRQHandler    [WEAK]
+                EXPORT TAMPER_IRQHandler [WEAK]
+                :
+                :
+                WWDG_IRQHandler
+                PVD_IRQHandler
+                TAMPER_IRQHandler
+                :
+                :
+                B .
+                ENDP
+ +

+ The user application may simply define an interrupt handler function by using the handler name + as shown below. +

+
+void WWDG_IRQHandler(void)
+{
+  :
+  :
+}
+ + +

system_device.c

+

+ A template file for system_device.c is provided by ARM but adapted by + the silicon vendor to match their actual device. As a minimum requirement + this file must provide a device specific system configuration function and a global variable + that contains the system frequency. It configures the device and initializes typically the + oscillator (PLL) that is part of the microcontroller device. +

+

+ The file system_device.c must provide + as a minimum requirement the SystemInit function as shown below. +

+ + + + + + + + + + + + + + + + +
Function DefinitionDescription
void SystemInit (void)Setup the microcontroller system. Typically this function configures the + oscillator (PLL) that is part of the microcontroller device. For systems + with variable clock speed it also updates the variable SystemCoreClock.
+ SystemInit is called from startup_device file.
void SystemCoreClockUpdate (void)Updates the variable SystemCoreClock and must be called whenever the + core clock is changed during program execution. SystemCoreClockUpdate() + evaluates the clock register settings and calculates the current core clock. +
+ +

+ Also part of the file system_device.c + is the variable SystemCoreClock which contains the current CPU clock speed shown below. +

+ + + + + + + + + + + + +
Variable DefinitionDescription
uint32_t SystemCoreClockContains the system core clock (which is the system clock frequency supplied + to the SysTick timer and the processor core clock). This variable can be + used by the user application to setup the SysTick timer or configure other + parameters. It may also be used by debugger to query the frequency of the + debug timer or configure the trace clock speed.
+ SystemCoreClock is initialized with a correct predefined value.

+ The compiler must be configured to avoid the removal of this variable in + case that the application program is not using it. It is important for + debug systems that the variable is physically present in memory so that + it can be examined to configure the debugger.
+ +

Note

+
    +

  • The above definitions are the minimum requirements for the file + system_device.c. This + file may export more functions or variables that provide a more flexible + configuration of the microcontroller system.

    +
    • +
+ + +

Core Peripheral Access Layer

+ +

Cortex-M Core Register Access

+

+ The following functions are defined in core_cm0.h / core_cm3.h + and provide access to Cortex-M core registers. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Function DefinitionCoreCore RegisterDescription
void __enable_irq (void)M0, M3PRIMASK = 0Global Interrupt enable (using the instruction CPSIE + i)
void __disable_irq (void)M0, M3PRIMASK = 1Global Interrupt disable (using the instruction + CPSID i)
void __set_PRIMASK (uint32_t value)M0, M3PRIMASK = valueAssign value to Priority Mask Register (using the instruction + MSR)
uint32_t __get_PRIMASK (void)M0, M3return PRIMASKReturn Priority Mask Register (using the instruction + MRS)
void __enable_fault_irq (void)M3FAULTMASK = 0Global Fault exception and Interrupt enable (using the + instruction CPSIE + f)
void __disable_fault_irq (void)M3FAULTMASK = 1Global Fault exception and Interrupt disable (using the + instruction CPSID f)
void __set_FAULTMASK (uint32_t value)M3FAULTMASK = valueAssign value to Fault Mask Register (using the instruction + MSR)
uint32_t __get_FAULTMASK (void)M3return FAULTMASKReturn Fault Mask Register (using the instruction MRS)
void __set_BASEPRI (uint32_t value)M3BASEPRI = valueSet Base Priority (using the instruction MSR)
uiuint32_t __get_BASEPRI (void)M3return BASEPRIReturn Base Priority (using the instruction MRS)
void __set_CONTROL (uint32_t value)M0, M3CONTROL = valueSet CONTROL register value (using the instruction MSR)
uint32_t __get_CONTROL (void)M0, M3return CONTROLReturn Control Register Value (using the instruction + MRS)
void __set_PSP (uint32_t TopOfProcStack)M0, M3PSP = TopOfProcStackSet Process Stack Pointer value (using the instruction + MSR)
uint32_t __get_PSP (void)M0, M3return PSPReturn Process Stack Pointer (using the instruction MRS)
void __set_MSP (uint32_t TopOfMainStack)M0, M3MSP = TopOfMainStackSet Main Stack Pointer (using the instruction MSR)
uint32_t __get_MSP (void)M0, M3return MSPReturn Main Stack Pointer (using the instruction MRS)
+ +

Cortex-M Instruction Access

+

+ The following functions are defined in core_cm0.h / core_cm3.hand + generate specific Cortex-M instructions. The functions are implemented in the file + core_cm0.c / core_cm3.c. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
NameCoreGenerated CPU InstructionDescription
void __NOP (void)M0, M3NOPNo Operation
void __WFI (void)M0, M3WFIWait for Interrupt
void __WFE (void)M0, M3WFEWait for Event
void __SEV (void)M0, M3SEVSet Event
void __ISB (void)M0, M3ISBInstruction Synchronization Barrier
void __DSB (void)M0, M3DSBData Synchronization Barrier
void __DMB (void)M0, M3DMBData Memory Barrier
uint32_t __REV (uint32_t value)M0, M3REVReverse byte order in integer value.
uint32_t __REV16 (uint16_t value)M0, M3REV16Reverse byte order in unsigned short value.
sint32_t __REVSH (sint16_t value)M0, M3REVSHReverse byte order in signed short value with sign extension to integer.
uint32_t __RBIT (uint32_t value)M3RBITReverse bit order of value
uint8_t __LDREXB (uint8_t *addr)M3LDREXBLoad exclusive byte
uint16_t __LDREXH (uint16_t *addr)M3LDREXHLoad exclusive half-word
uint32_t __LDREXW (uint32_t *addr)M3LDREXWLoad exclusive word
uint32_t __STREXB (uint8_t value, uint8_t *addr)M3STREXBStore exclusive byte
uint32_t __STREXB (uint16_t value, uint16_t *addr)M3STREXHStore exclusive half-word
uint32_t __STREXB (uint32_t value, uint32_t *addr)M3STREXWStore exclusive word
void __CLREX (void)M3CLREXRemove the exclusive lock created by __LDREXB, __LDREXH, or __LDREXW
+ + +

NVIC Access Functions

+

+ The CMSIS provides access to the NVIC via the register interface structure and several helper + functions that simplify the setup of the NVIC. The CMSIS HAL uses IRQ numbers (IRQn) to + identify the interrupts. The first device interrupt has the IRQn value 0. Therefore negative + IRQn values are used for processor core exceptions. +

+

+ For the IRQn values of core exceptions the file device.h provides + the following enum names. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Core Exception enum ValueCoreIRQnDescription
NonMaskableInt_IRQnM0, M3-14Cortex-M Non Maskable Interrupt
HardFault_IRQnM0, M3-13Cortex-M Hard Fault Interrupt
MemoryManagement_IRQnM3-12Cortex-M Memory Management Interrupt
BusFault_IRQnM3-11Cortex-M Bus Fault Interrupt
UsageFault_IRQnM3-10Cortex-M Usage Fault Interrupt
SVCall_IRQnM0, M3-5Cortex-M SV Call Interrupt
DebugMonitor_IRQnM3-4Cortex-M Debug Monitor Interrupt
PendSV_IRQnM0, M3-2Cortex-M Pend SV Interrupt
SysTick_IRQnM0, M3-1Cortex-M System Tick Interrupt
+ +

The following functions simplify the setup of the NVIC. +The functions are defined as static inline.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
NameCoreParameterDescription
void NVIC_SetPriorityGrouping (uint32_t PriorityGroup)M3Priority Grouping ValueSet the Priority Grouping (Groups . Subgroups)
uint32_t NVIC_GetPriorityGrouping (void)M3(void)Get the Priority Grouping (Groups . Subgroups)
void NVIC_EnableIRQ (IRQn_Type IRQn)M0, M3IRQ NumberEnable IRQn
void NVIC_DisableIRQ (IRQn_Type IRQn)M0, M3IRQ NumberDisable IRQn
uint32_t NVIC_GetPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberReturn 1 if IRQn is pending else 0
void NVIC_SetPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberSet IRQn Pending
void NVIC_ClearPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberClear IRQn Pending Status
uint32_t NVIC_GetActive (IRQn_Type IRQn)M3IRQ NumberReturn 1 if IRQn is active else 0
void NVIC_SetPriority (IRQn_Type IRQn, uint32_t priority)M0, M3IRQ Number, PrioritySet Priority for IRQn
+ (not threadsafe for Cortex-M0)
uint32_t NVIC_GetPriority (IRQn_Type IRQn)M0, M3IRQ NumberGet Priority for IRQn
uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)M3IRQ Number, Priority Group, Preemptive Priority, Sub PriorityEncode priority for given group, preemptive and sub priority
NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)M3IRQ Number, Priority, pointer to Priority Group, pointer to Preemptive Priority, pointer to Sub PriorityDeccode given priority to group, preemptive and sub priority
void NVIC_SystemReset (void)M0, M3(void)Resets the System
+

Note

+
    +

  • The processor exceptions have negative enum values. Device specific interrupts + have positive enum values and start with 0. The values are defined in + device.h file. +

    +
    • +

  • The values for PreemptPriority and SubPriority + used in functions NVIC_EncodePriority and NVIC_DecodePriority + depend on the available __NVIC_PRIO_BITS implemented in the NVIC. +

    +
    • +
+ + +

SysTick Configuration Function

+ +

The following function is used to configure the SysTick timer and start the +SysTick interrupt.

+ + + + + + + + + + + + + + +
NameParameterDescription
uint32_t SysTickConfig + (uint32_t ticks)ticks is SysTick counter reload valueSetup the SysTick timer and enable the SysTick interrupt. After this + call the SysTick timer creates interrupts with the specified time + interval.
+
+ Return: 0 when successful, 1 on failure.
+
+ + +

Cortex-M3 ITM Debug Access

+ +

The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that +provides together with the Serial Viewer Output trace capabilities for the +microcontroller system. The ITM has 32 communication channels; two ITM +communication channels are used by CMSIS to output the following information:

+
    +
  • ITM Channel 0: implements the ITM_SendChar function + which can be used for printf-style output via the debug interface.
    • +
  • ITM Channel 31: is reserved for the RTOS kernel and can be used for + kernel awareness debugging.
    • +
+

Note

+
    +

  • The ITM channel 31 is selected for the RTOS kernel since some kernels + may use the Privileged level for program execution. ITM + channels have 4 groups with 8 channels each, whereby each group can be + configured for access rights in the Unprivileged level. The ITM channel 0 + may be therefore enabled for the user task whereas ITM channel 31 may be + accessible only in Privileged level from the RTOS kernel itself.

    +
    • +
+ +

The prototype of the ITM_SendChar routine is shown in the +table below.

+ + + + + + + + + + + + + + +
NameParameterDescription
void uint32_t ITM_SendChar(uint32_t chr)character to outputThe function outputs a character via the ITM channel 0. The + function returns when no debugger is connected that has booked the + output. It is blocking when a debugger is connected, but the + previous character send is not transmitted.

+ Return: the input character 'chr'.
+ +

+ Example for the usage of the ITM Channel 31 for RTOS Kernels: +

+
+  // check if debugger connected and ITM channel enabled for tracing
+  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
+  (ITM->TCR & ITM_TCR_ITMENA) &&
+  (ITM->TER & (1UL << 31))) {
+    // transmit trace data
+    while (ITM->PORT31_U32 == 0);
+    ITM->PORT[31].u8 = task_id;      // id of next task
+    while (ITM->PORT[31].u32 == 0);
+    ITM->PORT[31].u32 = task_status; // status information
+  }
+ + +

Cortex-M3 additional Debug Access

+ +

CMSIS provides additional debug functions to enlarge the Cortex-M3 Debug Access. +Data can be transmitted via a certain global buffer variable towards the target system.

+ +

The buffer variable and the prototypes of the additional functions are shown in the +table below.

+ + + + + + + + + + + + + + + + + + + + + + + + +
NameParameterDescription
extern volatile int ITM_RxBuffer Buffer to transmit data towards debug system.

+ Value 0x5AA55AA5 indicates that buffer is empty.
int ITM_ReceiveChar (void)noneThe nonblocking functions returns the character stored in + ITM_RxBuffer.

+ Return: -1 indicates that no character was received.
int ITM_CheckChar (void)noneThe function checks if a character is available in ITM_RxBuffer.

+ Return: 1 indicates that a character is available, 0 indicates that + no character is available.
+ + +

CMSIS Example

+

+ The following section shows a typical example for using the CMSIS layer in user applications. + The example is based on a STM32F10x Device. +

+
+#include "stm32f10x.h"
+
+volatile uint32_t msTicks;                       /* timeTicks counter */
+
+void SysTick_Handler(void) {
+  msTicks++;                                     /* increment timeTicks counter */
+}
+
+__INLINE static void Delay (uint32_t dlyTicks) {
+  uint32_t curTicks = msTicks;
+
+  while ((msTicks - curTicks) < dlyTicks);
+}
+
+__INLINE static void LED_Config(void) {
+  ;                                              /* Configure the LEDs */
+}
+
+__INLINE static void LED_On (uint32_t led) {
+  ;                                              /* Turn On  LED */
+}
+
+__INLINE static void LED_Off (uint32_t led) {
+  ;                                              /* Turn Off LED */
+}
+
+int main (void) {
+  if (SysTick_Config (SystemCoreClock / 1000)) { /* Setup SysTick for 1 msec interrupts */
+    ;                                            /* Handle Error */
+    while (1);
+  }
+  
+  LED_Config();                                  /* configure the LEDs */                            
+ 
+  while(1) {
+    LED_On (0x100);                              /* Turn  on the LED   */
+    Delay (100);                                 /* delay  100 Msec    */
+    LED_Off (0x100);                             /* Turn off the LED   */
+    Delay (100);                                 /* delay  100 Msec    */
+  }
+}
+ + + \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/License.doc b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/CMSIS/License.doc new file mode 100644 index 0000000000000000000000000000000000000000..b6b8acecc137bca709444106cba045d3d01daedd GIT binary patch literal 39936 zcmeI53w&Hvz3*2ZZBuBVr4Jqg-IP)q2qBafkZ1Flwy9}S@}SfrFqxSo(8g!^moP(odvq z?1-P~rSnWxy)k$1Uu5y=1Ks4`kH|Iruxr=e*@t}heulg3&0El=OJVTdj~gA%QG|Cj zO)+Lpu`#RnaU+7^2}E5={8@zmi%^7jOmp+yxSuhvaXWRk`>gP6Zlm7w=Y;hFFQKlHfxaQ}ERf8S{OfPon%>RWR!E`Qf)aD%tq)`9jqjy!`t7(C??8 zN6#+|{a z7IHL08H+OOzPDoR@5VzOOM$dFX^6)r68iU4Fg?y;)TbzaJ;w zfA-UD=0C%aU$0-4&mXn(2YTc4*$@5p{bxV)%jXOIe4|5O9{n(1c|ZOc=#m^xbd7Gu zfA;z8Kj#bm`hEQn3@<~+{E9)35(eW{#(!42uD!^k`MrctL%f<0wU(VHKEEdlwYX3W z-7+I9V|p%J1rF>!2i7P1Q%++%5=%s4PA2KJrwO`aPAl=m)Fq=aC!B~nt$ndbyfYpN zXX43()0s@!Ty@D*Cbq>{6OW{lkz^v1O7`@`QWWmY41`lLry-Gvr8>h@)S97|a4LFY zd3oEahE^xkRPVI6hFYA)hPqHwUC60f*%At^2{pAjq}Di%p_Mg_fyl+zdl|P?IJKd+ zb)is`v%b0ASsZF;TSYZBPHRKc%Epk>&{W@WMnipjO=G3g+~UW&)lqvx+xiNphQ@1J z*3kBvhPF_>vv>hd3o4uy6reT{<}|Ocx2?_XEl^k2Tn~v9Yh4?vYgo}xSJT$e+~m~M z)itkKThp|jw#g3V9+g#&ZGed8rpEQox`xI^o2A*!K>ccG{L0&!Z4YUtu9;5R2HRHE zwAol%4y|o-Y8o4TO4~v$Yg+04C^~A_J9QBC5jB5(gUiuv;tUB5O|5Ozpd=!i#mIFH z(AF+qDypt|t?in}WR)VQ>1Yg>?)HYB1Y)Yjgjv6_SwAe>cBdHMB$Il0a0jfE3wI|wV_iv}DxJ|Jq`SjCJx(H-apH+cPd`0e9Ivp2 z;=O%6vEEoB<7%X2r;|i)rJTP0j-GhBI~H})L88-6D%KfGNzFy6%T_U>yC+dIRfiLU zPAn0o4iOiNbSIKM$*y=ztPW?K-teH)5pxo;NGzQWrv{}md&8Sz4hpd!)v4lrsbsW2 zl2KG2`ce8)l*J&?))7fUx@r_7#u8HLbo6H&X-{>VlD+9z&t|g6w)CZFwP(;t$1)lO zO52{q)1%b$;#gHzm7{jzQpcSsR5QJbrYnhrhh4EmEEUcqQ$%!xBb&Umo_I$poDyY_ z?sC(wqtXed)3M$TRYxM+*~DFtKPNex!#(k+HySA?8tdrqa?<`vK%s8bzgC5loNylu zaF-G&NcM>s@jE@3&cu4vKr|KKOap%Llbn`@);gFH>5kKAreC$dXN>~6d$s-q6D#a! zGMv5P^rnGiYE#-SVtw6%Y1-{^dcuRr{tW%>goBw_7wsb!k$5W7AJ0H~I^LB?pCm#S z$2V6vEp3g%Ea{GSbvr$=&9NRtN+aUS-~`n%!OH!`Ze>eNQ(J5KF)S0U{T&!|xWY*eB`cXC2o)m|OQezfm_xl<9wnc!$>|FZYNDx;{zSO5 zGu{)o{K|C4Q&CcpacGp4u(+ebiBSq75SC;#?oKu@inclsD_7*lvo9oVzK}oq!ov8InkN-=GR)6$F&|m1#1josM`yQ&%izL>aK$-GP)72AS3N+YE1V}@Z!qhG|nN+*>Z4EMlpakkPy{(7PVaps+6v9+^K zEJu$`cQporCz3V#BQ#Q0&-V4F`jRLYq%|tJOZHh^*&W`jN#jMuqLoN{q91FE=@HB@ z9IHIZPRLX_ScPJtJNmWx)BViLL8ZYyJO2mbG#iblGpRUANhzLkLwR+_Bi&ZVAUnA= z*-3OVUU7$e(N}4ozCp-DFggdVz@(+EJ>zqf)w!7A^_Dh~tw&<(uXum2 zOsaIJd=z=Mvs2U9YL(PxmJ=2~@hpYT$!I-*S7`*-E``JE*zjDEov;M0(l&~jV@-H1 zFs=&lX1k^gn#5HDEDd&il#3yk&V@j74pY+;9&q#6d6ck2k?zMd*M zrqXKCaOAxHxLt!C%lt|w6VIR;#U<&DSXw5@#HvgM^6TTQl9bAf#S>L{O!UHGmZOYZ z<41bIn=S%3=4?M1;ecHtGK@(w6|+oLbB3vA#n^B)ZkIIF7UiLFS-?fz*$$* zqBXoBge!aI+LlmjYo*h$W^H2wrQ`*))wH#@HMguMwyCbMy&i|E5;w37H=xb+JFN#< zX({px1}eo5S`%uiTSXf+wGEB9t(8tIMOs(X)Tv(QbUa)e+tl3D(6pk323+@<)>kyN zH9?W}XKS3bH7#uob?uEcEza8ZmbJ~Tp-C}9j*m-w$O*NyG`F;RY@oBDmNV$MnAy^> za#fpLIsuJswHR(4#tD;#I)%KUQ8ylgQH<&pN*Kz9<8T8o5h zd1vP+=6>c4WbF{w? zS10U5dcyJE>|%xqO<`0IdeCP<1xBO#D^qmXu7i2QHrp7YtZEESXqosG&Vp>E3p|%t zbWwL4p8H!;*1GW@AQZI+O|Fi>_UnagFV$TNu=ebj$pn!-rQF=IKvg=M7=4>QFhB(Ezd01)hM7RMvJ$qUxSO&mCRh3W?u0ScFLs>xw~6 zr>r=)MbQ@PV)3QPa1?g5dAkD%zf(}&i;b&+p?DN~ zEu89zb89Oexy*N6;cr5Z~NOO^(1jBrsPB2P<8 z50-l@C38l$y`&?Sip1giAnsl`oz&g{3GxBFCRF19`vP(%{Y{D7tsw5363~eUEN4ls zWr)FMyF#*MBSqRqq$(YaN9@*tJH@j3B1|OogsXkzN82q3*@+zU4mU?w2DDz?j3aNdpLvhvULhXC!s;OSYtM1$} zX^0;7#oPK9vdJOdZuCfs$N2pT1c;p~_Mkd#*J!{O{7Lj>TQFTDD;x&Ov^V{ zCs=8$E>Nf7WDbh6f-how!&~CL{k_y;RTmT{2V5oZ?K5dhgZae<%<&#;$0ydxudLFs zR-^++!PUiLtOCEZuQdNyf|?UUoYy5@%`iG>v*avVOZ+#AI?eqqGsi zIKQZ8 zTJ9`}Mx8ZWxaM37oU@LQbF?zV`?@t)@pGz=L$ztq`LZqxzndlpY7B)*WnJV z4YjnbcNWwk@BNHYlO<$m{UO?I1i*i8hiyj1QzXK%rbEIp2mC?+zY+| zUjFgR-@5DitsA$l+q&X}!$p`gxBJ$zkD7Vivris0b*uL=&8v&e>ELV-=Gh!Dulvhq zY|EWSX{C*m{q2F|Yfe;&oA8IIum2K;+aF5mOR8}FjFmx5(} z5PbM%@Zo{H51$XFjCcqp1n=QR$-u%s*cwSgmz z;anlP?DJOhm@#mY=e;jGuz1#GzkK^_!gC32`kNKo?V+YX`p82H)YyHY40p?ZstAe!qC>1tRF&;Xv zTT^D-Jggv^CP4-3SEAKLVxBV%9e(@;r=T0#omX<_pmgcQFXm3mmd;y$R;Me+s2+@6 z0jN(Ca2$G}ChsarTk3_|mkHaVrhIGeEREe)!G8e{g0F+e!H>Ydfqw^o1kIcZUkhR& z13nIJ05^g!fv7*>25~FJ5rw z__fiZte{cSF_IVNAdN*DWI#W-0DKDE0{%O=mUVs`coIAX{sm;$f9_ufe**s>%*P&B z0PX{ig6{y?2s?kd^XZ+B?R@$hPv8CYV>f+bAiiPshSmHGkL}32?A*|DnR70~=}({Y z^So)lKKa{u)AH6i8Qnu3l^>U<(6(kpYu@%H1^N1vSF*Ak$(w^#mt?+?x8}R{cqV7s zej1-SoTQ!$_64VbCeRGR;5G0DXv4-k2b>4e;0ACHxDPxHehPj8ehpp)vI*Y+zXxxD zU0@a`-46qcz~Nvi*aU6@H-lTiz2H&sZSc?F8Sv_}+h2X?)jMB(_SI+Yk8WPw{_IuH zUUlbH7kK|VFX+4~JAXE;`0V&hivCtKTuvxwRxapOt_d7eDvt_kx@xcX7gg!E)7 zpRhKwSo|&HIQjwLXfTbxJ}Cp!!CG)SXa{G30dPLJ99#je2KR!Oz#HHl@cIj{KmPE2 zw|(ZKzS}Ok?K9`x)^yP+BPVzEDJ#<(KK!$svN^1AkDhhj1UY`aWJm5C6KIOO+8|5a zU9*qOU2`@^-c_2mrKR)D_Iy6-aKH2Bn54u_C@E&P=BdWJ>|kTApU?O?#{3pE;}fg} zr-M&|E5WCLe1)sPXTde#T5vts25tm5frIfS=7SyCvF7HL;KOslhY=|w9{wemZN$Tf zZ13jb$zav*;{*QQ@b&2MZT7BoZ_^dM;iF5;9($Ye?PaET+pNWh78Sd3_RlLv`*3+Z zJ_*|x4=-`C*aU6{KLalUhrdWW1bhsf4L%QU2mc$q1PJ&&_F^6Ck+z{FbS6X^>ks6Vfk$x@J4 zk3zveCzs`{-x2>G1&1;BD?k`r3#1Ef0;f2}EC&r>JxGHL_^;rfz-z$Q89TXu6TJG9 zNBQ@)&+Fe+{JU_|$5xt2UF^xpd&=(>1@`3VRbF2#%M(qkoccGL<42YMBX15@I`WPz zb+|dk8yh!AUP`ml`e&5uY@KR*T&u*)(RdXff(`)ZEx`T{vm+|MI_H=pF(0kZ?-_h+_G@{|iIX|& z%(j|W(#Dfh`Xb3NyCe7PZWk?z=A6r)fMd02hL-KzqUZ z+y4>U!N1q^^snFgHws5&8}aa~V79{j`_6%YrD%8eOK1AF<;*;`tJ=!`#X08+y8pYy`+*tPe7E=mG*lmuu3la|*X)Cvc`L6aOS63*zRN}x zZVDWDA33lbQ}K7Zip_E}BP)DUO_NEQl<75L(?i=*Kl@=E?PtzeRa6=#>|HgzEDbVX zEOGUwX8F!tUoiD%#uPtw9#1jTNsax~nK6!8%Y6!T+220XP239FO^~Xq#l+3;cYU33 zxRx2FjS?Ny5F__UDi1XKzKMIX^rurz(HVG zAOW_5!RhRxajNRa2*lHR3(s5j47+u|0jj@@o!RU6Wp{;L`QL(OcGcE`)4?afmEcq0 zCU7wQaKHsXJ8zmQDTnVcNfID0drv#r`(S*&duZIP{BR?ipT1}B>3{Y<*jBzgLHe25 z*|MBK$leF*4BiLp&q4oH_m1L8F#o%}SDnQ<%G$OVj=!`_=u2!@fzN_#z_s9dunpV@ ze3_Xakeds+-|ETF&CqN=Mx}7bgYLNsX)YfMeDV13L6Hegwb*NjU%|bK#+eT#|0rpD zS9`r3A{5-q_B~J9czVL}W#%|_=1Ci;&Y_Z9e5w=<2`>&*nOn@c_MO=KuY-eY@_W_4 zwlBH)GwuCI+xTfyJopme;{F4&M1!Ze9=B zn|2pOJ=usO`7OCFx{>-cG;ixNi@&Q?0iWnxD8v zMss*SAYCP$gjs9k`cTC1;@TVnRJTsJ=q-oJY94Y>!8kx^defnKEBZbRJ_4G-Mc`WS zIdCVq3)~GJ0{;ZQ34RUq9z=bZJukEChN0Q*_V*C`d%$oE9oumNxoC2SC@#jM!3VK^ zqqMD{=jG<$-)RE4-}l^QhK7dpcNH^n?TdF@N5V`~wnO_Iwh(h;Z&R{E63o`!4z?1A zpT5JNK|E%!VzY-WXDBm;Smm!J+{cSABA!15!P(w(huHTB4a_u8s2PJNY|2b&iH7sE zk|NvotQ{&~lL?b>{t|F0xB_VLlY{XLcpe#a+_;Nrgwr6@ z4TtY(NaS1h_uaN~;w0M80G$f@JY0=zT?a0rCl>>`-0Gpf#QSbmK37XzcosYdd~V29 zAI%ZD?mjn4=;=s^BgGTI<(l%byTIj-i#7yY-VP8e9!iG(4d~horqF4$_tAM^OYZ1eK@b4)|~T=O-~R9}7Ee&(qI_BZoW2bv9==bLjY9rMTehnPb)Ei}cv zK|FuO;pWAXBaBW<=-lDG$!fb*^@~%EHT$nS*60Mv_YXMHJkxoy(K-A#SJasM!YfQI zf3$Vil+{LWt98moXJ_@-PKow)M(1)uQ`Z}923=aZ!E88TgPGd3!9>qL+vvQ++_S>w zbG02t@53+LZTg_xV)mW9H3;+l@|y>&)+~XMNA;&5qvh zu0H#5^U8)FnR{!VG9_pH*tB2twE5-v|7wnQerj}5_jKo36FL4_qZ2(Z)x2o*R|z_S zaAfx{%qe^P%IN&M-XZJ6LVM$D=IQd+%}e#K8=ZpeDEXb4y5%kNO3&M-YVj^R#&@Ha zwH0+Un#kWavfD(YY8DF>33RV_?OJYz{Ml{HnIAe~&*3LO4=T%7HQGg6E{(yDcFrVj z?d}-0e}wiFu~vF=e0J&+K@r zm@mKEEaxnJ;&S1|6F;+}*bYxEENNhx7E4c4qGaZ=gd<}WqwA0oW0wK9H8-yCJ6R5t zO}k^tL#*_dTypSI{ej&6_N(o(GPa_^h26PEj{!sMU1i69{5*}5FVBAb$Z*w}dY-;x z*WN6>ry280Q2`Z`|JORie0<>30`B?BYpiyuKTtj!mLRc{W|Qn zC;4q>Hn~sTHf&`%jFH2gY1+|mV6ODp_aB;jdRGz#aY`rbOic2QMYXx*LuQMuzb~7| zrEHqHkobFfC-M@KU60;KP_N$kXjY|t@(bbn#({Uxx~Rr6^%oKI(kE`;`KRXYnfF{< zW{y1k>(5ma_b>^PBc-aDs@ymf(@ts2zEZ5JXvv)TC?7Kzw{?27d z{a+@6_ZkE7L7`R#g<3Nd`t)&IxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>K7bs^ z=l{!(EdI$4e{yTphh|=X6aIhYpYE$CZpx^*K78*=Ab*{J{T|mx?^9kd1hfb6Nx-2- za}Cg&JMA6F*S`bEm;VZoFMmJK+r9q=pY7_V5-K*zq`u_%4TGWR6CBEpY28z=w7?rpP zh~`^>{Piz;&q~w2$H-3@+N@%sAKlnuOVNBb%KHSNt=-=p(L2zw-#T>ZRjYjQFuQA^ z4;2zsxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>{_Z&-|5N^@{7!j)@=fKn>V3U@ zY`v$~yLma9^26nm%g2^KDo;~Bz24!=cb8|W)3oy6N1x8ssaqYL;i#DPF6R?E;1I9? zyu$&Og@lKJMc{C-7*v2Gz>%O590jU?+*0|^#{iX;|Icw9vkV*ujt3_Io$6KkNrWeZ zQ^2W!qcmnYr~yiU8`OLEdKNwimrly*?|~f?vZr`boPyh(YaXXZd_GBrrcReMx%)N* zE9`^!^VFQxm*~ubB8R-VW9(@-_b;ivsND+o;_oiizT{TnWC|ZjrU$)qTMTBZw*JR68N!YliaPCm8>a?PG-@qtzTACE&pQv*4=K5Vs z`{H;hm~8txd*YveoHC~8yGPFn9{+9UC)t0UTl3p5GIjJ;XUUrRTkVZX*{y3Iw3pxZ zWc#lM&fBe4#?Sn2+8@8h-AjEh?Mrq)D7r4lr^3C zU;jHIYZ|O+)p<3d?3~tpm7iX9g89RTAN+I9wcVQ;h1?Ty;4iuU4^_6tk7NCBgs4Yd zGXeW;_)97i(V8p0u>QZd^_G g!+ZG+YJlCX=dW%57tSBCAIe6m^l&ZsOP@db55$o82LJ#7 literal 0 HcmV?d00001 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/Release_Notes.html b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/Release_Notes.html new file mode 100644 index 00000000..633e42e3 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/Release_Notes.html @@ -0,0 +1,342 @@ + + + + + + + + + + + + +Release Notes for STM32F10x Standard Peripherals Library Drivers + + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F10x Standard Peripherals Library Drivers +(StdPeriph_Driver)

+

Copyright 2011 STMicroelectronics

+

+
+

 

+ + + + + + +
+

Contents

+
    +
  1. STM32F10x Standard Peripherals Library +Drivers update History
    2. +
  2. License
    3. +
+ + +

STM32F10x Standard +Peripherals Library Drivers  update History


+

V3.5.0 / 11-March-2011

+

Main +Changes

+ +
    +
  • stm32f10x_can.h/.c files:
    • +
      +
    • Add 5 new functions
      • +
        +
      • 3 +new functions controlling the counter errors: CAN_GetLastErrorCode(), +CAN_GetReceiveErrorCounter() and CAN_GetLSBTransmitErrorCounter().
        • +
      +
        +
      • 1 new function to select the CAN operating mode: CAN_OperatingModeRequest().
        • +
      +
        +
      • 1 new function to support CAN TT mode: CAN_TTComModeCmd().
        +
        • +
      +
    • CAN_TransmitStatus() function updated to support all CAN transmit intermediate states
      +
      • +
    +
  • stm32f10x_i2c.h/.c files:
    • +
      +
    • Add 1 new function:
      • +
        +
      • I2C_NACKPositionConfig(): +This function configures the same bit (POS) as I2C_PECPositionConfig() +but is intended to be used in I2C mode while I2C_PECPositionConfig() is +intended to used in SMBUS mode.
        • +
      +
    +
  • stm32f10x_tim.h/.c files:
    • +
      +
    • Change the TIM_DMABurstLength_xBytes definitions to TIM_DMABurstLength_xTansfers
      +
      • +
    + + +
+ +

3.4.0 +- 10/15/2010

+ +
    +
  1. General
    2. +
+ +
    +
  • Add support for STM32F10x High-density value line devices.
    • +
+ +
    +
  1. STM32F10x_StdPeriph_Driver
    2. +
+ + +
    + +
  • stm32f10x_bkp.h/.c
    • +
      +
    • Delete BKP registers definition from stm32f10x_bkp.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_can.h/.c
    • +
      +
    • Delete CAN registers definition from stm32f10x_can.c and use defines within stm32f10x.h file.
      +
      • +
    • Update the wording of some defines and Asserts macro.
      +
      • +
    • CAN_GetFlagStatus() +and CAN_ClearFlag() functions: updated to support new flags (were not +supported in previous version). These flags are:  CAN_FLAG_RQCP0, +CAN_FLAG_RQCP1, CAN_FLAG_RQCP2, CAN_FLAG_FMP1, CAN_FLAG_FF1, +CAN_FLAG_FOV1, CAN_FLAG_FMP0, CAN_FLAG_FF0,   CAN_FLAG_FOV0, +CAN_FLAG_WKU, CAN_FLAG_SLAK and CAN_FLAG_LEC.
      +
      • +
    • CAN_GetITStatus() +function: add a check of the interrupt enable bit before getting the +status of corresponding interrupt pending bit.
      +
      • +
    • CAN_ClearITPendingBit() function: correct the procedure to clear the interrupt pending bit.
      +
      • +
    +
  • stm32f10x_crc.h/.c
    • +
      +
    • Delete CRC registers definition from stm32f10x_crc.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dac.h/.c
    • +
      +
    • Delete DAC registers definition from stm32f10x_dac.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dbgmcu.h/.c
    • +
      +
    • Delete DBGMCU registers definition from stm32f10x_dbgmcu.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dma.h/.c
    • +
      +
    • Delete DMA registers definition from stm32f10x_dma.c and use defines within stm32f10x.h file.
      • +
    • Add new function "void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);"
      +
      • +
    +
  • stm32f10x_flash.h/.c
    • +
      +
    • FLASH functions (Erase and Program) updated to always clear the "PG", "MER" and "PER" bits even in case of TimeOut Error.
      • +
    +
  • stm32f10x_fsmc.h/.c
    • +
      +
    • Add new member "FSMC_AsynchronousWait" in "FSMC_NORSRAMInitTypeDef" structure.
      • +
    +
  • stm32f10x_gpio.h/.c
    • +
      +
    • GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for TIM6, TIM7 and DAC DMA requests, TIM12 and DAC Triggers / DMA2_Channel5 Interrupt mapping.
      • +
    +
  • stm32f10x_pwr.h/.c
    • +
      +
    • Delete PWR registers definition from stm32f10x_pwr.c and use defines within stm32f10x.h and core_cm3.h files.
      • +
    +
  • stm32f10x_rtc.h/.c
    • +
      +
    • Delete RTC registers definition from stm32f10x_rtc.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_spi.h/.c
    • +
      +
    • Add new definition for I2S Audio Clock frequencies "I2S_AudioFreq_192k".
      • +
    +
  • stm32f10x_tim.h/.c
    • +
    • Add new definition for TIM Input Capture Polarity "TIM_ICPolarity_BothEdge".
    + +
+ +

3.3.0 +- 04/16/2010

+ +
  1. General
+
  • Add support for STM32F10x XL-density devices.
  • I2C driver: events description and management enhancement.
+
  1. STM32F10x_StdPeriph_Driver
+
  • stm32f10x_dbgmcu.h/.c
    • DBGMCU_Config() function: add new values DBGMCU_TIMx_STOP (x: 9..14) for DBGMCU_Periph parameter.
  • stm32f10x_flash.h/.c: +updated to support Bank2 of XL-density devices (up to 1MByte of Flash +memory). For more details, refer to the description provided within +stm32f10x_flash.c file.
  • stm32f10x_gpio.h/.c
    • GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for FSMC_NADV pin and TIM9..11,13,14.
  • stm32f10x_i2c.h/.c: I2C events description and management enhancement.
    • I2C_CheckEvent() +function: updated to check whether the last event contains the +I2C_EVENT  (instead of check whether the last event is equal to +I2C_EVENT)
    • Add +detailed description of I2C events and how to manage them using the +functions provided by this driver. For more information, refer to +stm32f10x_i2c.h and stm32f10x_i2c.c files.
  • stm32f10x_rcc.h/.c: updated to support TIM9..TIM14 APB clock and reset configuration
  • stm32f10x_tim.h/.c: updated to support new Timers TIM9..TIM14.
  • stm32f10x_sdio.h: 
    • SDIO_SetSDIOReadWaitMode() function: correct values of SDIO_ReadWaitMode parameter
      change
        +#define +SDIO_ReadWaitMode_CLK               +  ((uint32_t)0x00000000)
        #define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000001)
      by
        #define +SDIO_ReadWaitMode_CLK               +  ((uint32_t)0x00000001)
        #define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000000)
+

3.2.0 +- 03/01/2010

+
    +
  1. General
    2. +
+
    + +
  • Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices.
    • +
  • Almost +peripherals drivers were updated to support Value +line devices features
    • +
  • Drivers limitations fix and enhancements.
    • + +
+
    +
  1. STM32F10x_StdPeriph_Driver
    2. +
+
    +
  • Add new +firmware driver for CEC peripheral: stm32f10x_cec.h and stm32f10x_cec.c
    • +
  • Timers drivers stm32f10x_tim.h/.c: add support for new General Purpose Timers: TIM15, TIM16 and TIM17.
    • +
  • RCC driver: add support for new Value peripherals: HDMI-CEC, TIM15, TIM16 and TIM17.
    • +
  • GPIO driver: add new remap parameters for TIM1, TIM15, TIM16, TIM17 and HDMI-CEC: GPIO_Remap_TIM1_DMA, GPIO_Remap_TIM15, GPIO_Remap_TIM16, GPIO_Remap_TIM17, GPIO_Remap_CEC.
    • +
  • USART +driver: add support for Oversampling by 8 mode and onebit method. 2 +functions has been added: USART_OverSampling8Cmd() and +USART_OneBitMethodCmd().
    +
    • +
  • DAC +driver: add new functions handling the DAC under run feature: +DAC_ITConfig(), DAC_GetFlagStatus(), DAC_ClearFlag(), DAC_GetITStatus() +and DAC_ClearITPendingBit().
    • +
  • DBGMCU driver: add new parameters for TIM15, TIM16 and TIM17: DBGMCU_TIM15_STOP, DBGMCU_TIM16_STOP, DBGMCU_TIM17_STOP.
    +
    • +
  • FLASH +driver: the FLASH_EraseOptionBytes() function updated. This is now just +erasing the option bytes without modifying the RDP status either +enabled or disabled.
    • +
  • PWR +driver: the PWR_EnterSTOPMode() function updated. When woken up from +STOP mode, this function resets again the SLEEPDEEP bit in the +Cortex-M3 System Control register to allow Sleep mode entering.
    • + + +
+

License

+

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

+

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

+

 

+
+
+

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h new file mode 100644 index 00000000..b8aa49a2 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h @@ -0,0 +1,385 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the GPIO + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_GPIO_H +#define __STM32F10x_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/** @defgroup GPIO_Exported_Types + * @{ + */ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOF) || \ + ((PERIPH) == GPIOG)) + +/** + * @brief Output Maximum frequency selection + */ + +typedef enum +{ + GPIO_Speed_10MHz = 1, + GPIO_Speed_2MHz, + GPIO_Speed_50MHz +}GPIOSpeed_TypeDef; +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ + ((SPEED) == GPIO_Speed_50MHz)) + +/** + * @brief Configuration Mode enumeration + */ + +typedef enum +{ GPIO_Mode_AIN = 0x0, + GPIO_Mode_IN_FLOATING = 0x04, + GPIO_Mode_IPD = 0x28, + GPIO_Mode_IPU = 0x48, + GPIO_Mode_Out_OD = 0x14, + GPIO_Mode_Out_PP = 0x10, + GPIO_Mode_AF_OD = 0x1C, + GPIO_Mode_AF_PP = 0x18 +}GPIOMode_TypeDef; + +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ + ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ + ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ + ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) + +/** + * @brief GPIO Init structure definition + */ + +typedef struct +{ + uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ +}GPIO_InitTypeDef; + + +/** + * @brief Bit_SET and Bit_RESET enumeration + */ + +typedef enum +{ Bit_RESET = 0, + Bit_SET +}BitAction; + +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ + +#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) + +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) + +/** + * @} + */ + +/** @defgroup GPIO_Remap_define + * @{ + */ + +#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */ +#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */ +#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */ +#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */ +#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */ +#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */ +#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */ +#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */ +#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */ +#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */ +#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */ +#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */ +#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */ +#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ +#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */ +#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */ +#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected + to TIM2 Internal Trigger 1 for calibration + (only for Connectivity line devices) */ +#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ + +#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */ + +#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */ + +#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */ +#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */ +#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + only for High density Value line devices) */ + +#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ + ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ + ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ + ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ + ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ + ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ + ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ + ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \ + ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ + ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \ + ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \ + ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \ + ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \ + ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \ + ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \ + ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \ + ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \ + ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \ + ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \ + ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC)) + +/** + * @} + */ + +/** @defgroup GPIO_Port_Sources + * @{ + */ + +#define GPIO_PortSourceGPIOA ((uint8_t)0x00) +#define GPIO_PortSourceGPIOB ((uint8_t)0x01) +#define GPIO_PortSourceGPIOC ((uint8_t)0x02) +#define GPIO_PortSourceGPIOD ((uint8_t)0x03) +#define GPIO_PortSourceGPIOE ((uint8_t)0x04) +#define GPIO_PortSourceGPIOF ((uint8_t)0x05) +#define GPIO_PortSourceGPIOG ((uint8_t)0x06) +#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE)) + +#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOG)) + +/** + * @} + */ + +/** @defgroup GPIO_Pin_sources + * @{ + */ + +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) + +/** + * @} + */ + +/** @defgroup Ethernet_Media_Interface + * @{ + */ +#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) +#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) + +#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \ + ((INTERFACE) == GPIO_ETH_MediaInterface_RMII)) + +/** + * @} + */ +/** + * @} + */ + +/** @defgroup GPIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions + * @{ + */ + +void GPIO_DeInit(GPIO_TypeDef* GPIOx); +void GPIO_AFIODeInit(void); +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_EventOutputCmd(FunctionalState NewState); +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_GPIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h new file mode 100644 index 00000000..b3b7d821 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h @@ -0,0 +1,727 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RCC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RCC_H +#define __STM32F10x_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @defgroup RCC_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ + uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ +}RCC_ClocksTypeDef; + +/** + * @} + */ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup HSE_configuration + * @{ + */ + +#define RCC_HSE_OFF ((uint32_t)0x00000000) +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_HSE_Bypass ((uint32_t)0x00040000) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) + +/** + * @} + */ + +/** @defgroup PLL_entry_clock_source + * @{ + */ + +#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL) + #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) + #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div2)) +#else + #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_PREDIV1)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup PLL_multiplication_factor + * @{ + */ +#ifndef STM32F10X_CL + #define RCC_PLLMul_2 ((uint32_t)0x00000000) + #define RCC_PLLMul_3 ((uint32_t)0x00040000) + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_10 ((uint32_t)0x00200000) + #define RCC_PLLMul_11 ((uint32_t)0x00240000) + #define RCC_PLLMul_12 ((uint32_t)0x00280000) + #define RCC_PLLMul_13 ((uint32_t)0x002C0000) + #define RCC_PLLMul_14 ((uint32_t)0x00300000) + #define RCC_PLLMul_15 ((uint32_t)0x00340000) + #define RCC_PLLMul_16 ((uint32_t)0x00380000) + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ + ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ + ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ + ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ + ((MUL) == RCC_PLLMul_16)) + +#else + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) + + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_6_5)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup PREDIV1_division_factor + * @{ + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) + #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) + #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) + #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) + #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) + #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) + #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) + #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) + #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) + #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) + #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) + #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) + #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) + #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) + #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) + + #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ + ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ + ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ + ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ + ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ + ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ + ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ + ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) +#endif +/** + * @} + */ + + +/** @defgroup PREDIV1_clock_source + * @{ + */ +#ifdef STM32F10X_CL +/* PREDIV1 clock source (for STM32 connectivity line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ + ((SOURCE) == RCC_PREDIV1_Source_PLL2)) +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/* PREDIV1 clock source (for STM32 Value line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) +#endif +/** + * @} + */ + +#ifdef STM32F10X_CL +/** @defgroup PREDIV2_division_factor + * @{ + */ + + #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) + #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) + #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) + #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) + #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) + #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) + #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) + #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) + #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) + #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) + #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) + #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) + #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) + #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) + #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) + + #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ + ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ + ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ + ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ + ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ + ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ + ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ + ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) +/** + * @} + */ + + +/** @defgroup PLL2_multiplication_factor + * @{ + */ + + #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) + #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) + #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) + #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) + #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) + #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) + #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) + #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) + #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) + + #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ + ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ + ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ + ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ + ((MUL) == RCC_PLL2Mul_20)) +/** + * @} + */ + + +/** @defgroup PLL3_multiplication_factor + * @{ + */ + + #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) + #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) + #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) + #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) + #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) + #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) + #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) + #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) + #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) + + #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ + ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ + ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ + ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ + ((MUL) == RCC_PLL3Mul_20)) +/** + * @} + */ + +#endif /* STM32F10X_CL */ + + +/** @defgroup System_clock_source + * @{ + */ + +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup AHB_clock_source + * @{ + */ + +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup APB1_APB2_clock_source + * @{ + */ + +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_HCLK_Div4 ((uint32_t)0x00000500) +#define RCC_HCLK_Div8 ((uint32_t)0x00000600) +#define RCC_HCLK_Div16 ((uint32_t)0x00000700) +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_Interrupt_source + * @{ + */ + +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_CSS ((uint8_t)0x80) + +#ifndef STM32F10X_CL + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) + #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) +#else + #define RCC_IT_PLL2RDY ((uint8_t)0x20) + #define RCC_IT_PLL3RDY ((uint8_t)0x40) + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ + ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) + #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) +#endif /* STM32F10X_CL */ + + +/** + * @} + */ + +#ifndef STM32F10X_CL +/** @defgroup USB_Device_clock_source + * @{ + */ + + #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) + #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) + + #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ + ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) +/** + * @} + */ +#else +/** @defgroup USB_OTG_FS_clock_source + * @{ + */ + #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) + #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) + + #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ + ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +#ifdef STM32F10X_CL +/** @defgroup I2S2_clock_source + * @{ + */ + #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) +/** + * @} + */ + +/** @defgroup I2S3_clock_source + * @{ + */ + #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +/** @defgroup ADC_clock_source + * @{ + */ + +#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) +#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) +#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) +#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) +#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ + ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) +/** + * @} + */ + +/** @defgroup LSE_configuration + * @{ + */ + +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RTC_clock_source + * @{ + */ + +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) +#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) +/** + * @} + */ + +/** @defgroup AHB_peripheral + * @{ + */ + +#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) +#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) +#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) +#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) +#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) + +#ifndef STM32F10X_CL + #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) + #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) +#else + #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) + #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) + #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) + #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) + + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) + #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup APB2_peripheral + * @{ + */ + +#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) +#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) +#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) +#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) +#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) +#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) +#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) +#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) +#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) +#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000) +#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000) +#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) +#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000) + +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup APB1_peripheral + * @{ + */ + +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) +#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) +#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_USB ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) +#define RCC_APB1Periph_CEC ((uint32_t)0x40000000) + +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup Clock_source_to_output_on_MCO_pin + * @{ + */ + +#define RCC_MCO_NoClock ((uint8_t)0x00) +#define RCC_MCO_SYSCLK ((uint8_t)0x04) +#define RCC_MCO_HSI ((uint8_t)0x05) +#define RCC_MCO_HSE ((uint8_t)0x06) +#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) + +#ifndef STM32F10X_CL + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2)) +#else + #define RCC_MCO_PLL2CLK ((uint8_t)0x08) + #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) + #define RCC_MCO_XT1 ((uint8_t)0x0A) + #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) + + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ + ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ + ((MCO) == RCC_MCO_PLL3CLK)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ + +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) + +#ifndef STM32F10X_CL + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#else + #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) + #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#endif /* STM32F10X_CL */ + +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions + * @{ + */ + +void RCC_DeInit(void); +void RCC_HSEConfig(uint32_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); +#endif + +#ifdef STM32F10X_CL + void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); + void RCC_PLL2Config(uint32_t RCC_PLL2Mul); + void RCC_PLL2Cmd(FunctionalState NewState); + void RCC_PLL3Config(uint32_t RCC_PLL3Mul); + void RCC_PLL3Cmd(FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); + +#ifndef STM32F10X_CL + void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); +#else + void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); +#endif /* STM32F10X_CL */ + +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); + +#ifdef STM32F10X_CL + void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); + void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); +#endif /* STM32F10X_CL */ + +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +#ifdef STM32F10X_CL +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCOConfig(uint8_t RCC_MCO); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RCC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h new file mode 100644 index 00000000..6056c4c6 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h @@ -0,0 +1,487 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SPI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SPI_H +#define __STM32F10x_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/** @defgroup SPI_Exported_Types + * @{ + */ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler. + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/** + * @} + */ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ + ((DATASIZE) == SPI_DataSize_8b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx) || \ + ((MODE) == I2S_Mode_MasterRx) ) +/** + * @} + */ + +/** @defgroup I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) +#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) +#define I2S_IT_UDR ((uint8_t)0x53) +#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ + ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) +/** + * @} + */ + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) +#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions + * @{ + */ + +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_SPI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h new file mode 100644 index 00000000..61ae249a --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h @@ -0,0 +1,412 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_USART_H +#define __STM32F10x_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/** @defgroup USART_Exported_Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ + + uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + + uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/** + * @} + */ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4) || \ + ((PERIPH) == UART5)) + +#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3)) + +#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4)) +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_0_5) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) +#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE ((uint16_t)0x0360) +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) +#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ + +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) + +#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) +#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ + ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ + || ((USART_FLAG) != USART_FLAG_CTS)) +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) +#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions + * @{ + */ + +void USART_DeInit(USART_TypeDef* USARTx); +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); +void USART_SendBreak(USART_TypeDef* USARTx); +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_USART_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c new file mode 100644 index 00000000..93dbcd7c --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c @@ -0,0 +1,650 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the GPIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_gpio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +/** @defgroup GPIO_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------------*/ +#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) + +/* --- EVENTCR Register -----*/ + +/* Alias word address of EVOE bit */ +#define EVCR_OFFSET (AFIO_OFFSET + 0x00) +#define EVOE_BitNumber ((uint8_t)0x07) +#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) + + +/* --- MAPR Register ---*/ +/* Alias word address of MII_RMII_SEL bit */ +#define MAPR_OFFSET (AFIO_OFFSET + 0x04) +#define MII_RMII_SEL_BitNumber ((u8)0x17) +#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) + + +#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) +#define LSB_MASK ((uint16_t)0xFFFF) +#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) +#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) +#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) +#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval None + */ +void GPIO_DeInit(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + if (GPIOx == GPIOA) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); + } + else if (GPIOx == GPIOB) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); + } + else if (GPIOx == GPIOC) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); + } + else if (GPIOx == GPIOD) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); + } + else if (GPIOx == GPIOE) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); + } + else if (GPIOx == GPIOF) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); + } + else + { + if (GPIOx == GPIOG) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); + } + } +} + +/** + * @brief Deinitializes the Alternate Functions (remap, event control + * and EXTI configuration) registers to their default reset values. + * @param None + * @retval None + */ +void GPIO_AFIODeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); +} + +/** + * @brief Initializes the GPIOx peripheral according to the specified + * parameters in the GPIO_InitStruct. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that + * contains the configuration information for the specified GPIO peripheral. + * @retval None + */ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) +{ + uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; + uint32_t tmpreg = 0x00, pinmask = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); + assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); + +/*---------------------------- GPIO Mode Configuration -----------------------*/ + currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); + if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) + { + /* Check the parameters */ + assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); + /* Output mode */ + currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; + } +/*---------------------------- GPIO CRL Configuration ------------------------*/ + /* Configure the eight low port pins */ + if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) + { + tmpreg = GPIOx->CRL; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + /* Get the port pins position */ + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding low control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << pinpos); + } + else + { + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << pinpos); + } + } + } + } + GPIOx->CRL = tmpreg; + } +/*---------------------------- GPIO CRH Configuration ------------------------*/ + /* Configure the eight high port pins */ + if (GPIO_InitStruct->GPIO_Pin > 0x00FF) + { + tmpreg = GPIOx->CRH; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = (((uint32_t)0x01) << (pinpos + 0x08)); + /* Get the port pins position */ + currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding high control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + } + } + GPIOx->CRH = tmpreg; + } +} + +/** + * @brief Fills each GPIO_InitStruct member with its default value. + * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; +} + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO input data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO input data port value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->IDR); +} + +/** + * @brief Reads the specified output data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The output port pin value. + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO output data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO output data port value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->ODR); +} + +/** + * @brief Sets the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRR = GPIO_Pin; +} + +/** + * @brief Clears the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BRR = GPIO_Pin; +} + +/** + * @brief Sets or clears the selected data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_Pin_x where x can be (0..15). + * @param BitVal: specifies the value to be written to the selected bit. + * This parameter can be one of the BitAction enum values: + * @arg Bit_RESET: to clear the port pin + * @arg Bit_SET: to set the port pin + * @retval None + */ +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_BIT_ACTION(BitVal)); + + if (BitVal != Bit_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BRR = GPIO_Pin; + } +} + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param PortVal: specifies the value to be written to the port output data register. + * @retval None + */ +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR = PortVal; +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t tmp = 0x00010000; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + tmp |= GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Reset LCKK bit */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; +} + +/** + * @brief Selects the GPIO pin used as Event output. + * @param GPIO_PortSource: selects the GPIO port to be used as source + * for Event output. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). + * @param GPIO_PinSource: specifies the pin for the Event output. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmpreg = AFIO->EVCR; + /* Clear the PORT[6:4] and PIN[3:0] bits */ + tmpreg &= EVCR_PORTPINCONFIG_MASK; + tmpreg |= (uint32_t)GPIO_PortSource << 0x04; + tmpreg |= GPIO_PinSource; + AFIO->EVCR = tmpreg; +} + +/** + * @brief Enables or disables the Event Output. + * @param NewState: new state of the Event output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_EventOutputCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState; +} + +/** + * @brief Changes the mapping of the specified pin. + * @param GPIO_Remap: selects the pin to remap. + * This parameter can be one of the following values: + * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping + * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping + * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping + * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping + * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping + * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping + * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping + * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping + * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping + * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping + * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration + * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices) + * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices) + * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST + * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled + * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP) + * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) + * When the SPI3/I2S3 is remapped using this function, the SWJ is configured + * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST. + * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected + * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices) + * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to + * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output. + * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) + * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices) + * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) + * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices) + * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + * only for High density Value line devices) + * @param NewState: new state of the port pin remapping. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) +{ + uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_REMAP(GPIO_Remap)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + tmpreg = AFIO->MAPR2; + } + else + { + tmpreg = AFIO->MAPR; + } + + tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; + tmp = GPIO_Remap & LSB_MASK; + + if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) + { + tmpreg &= DBGAFR_SWJCFG_MASK; + AFIO->MAPR &= DBGAFR_SWJCFG_MASK; + } + else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) + { + tmp1 = ((uint32_t)0x03) << tmpmask; + tmpreg &= ~tmp1; + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + else + { + tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + + if (NewState != DISABLE) + { + tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); + } + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + AFIO->MAPR2 = tmpreg; + } + else + { + AFIO->MAPR = tmpreg; + } +} + +/** + * @brief Selects the GPIO pin used as EXTI Line. + * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). + * @param GPIO_PinSource: specifies the EXTI line to be configured. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmp = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); + AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; + AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); +} + +/** + * @brief Selects the Ethernet media interface. + * @note This function applies only to STM32 Connectivity line devices. + * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode. + * This parameter can be one of the following values: + * @arg GPIO_ETH_MediaInterface_MII: MII mode + * @arg GPIO_ETH_MediaInterface_RMII: RMII mode + * @retval None + */ +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) +{ + assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); + + /* Configure MII_RMII selection bit */ + *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c new file mode 100644 index 00000000..4b2ec1f1 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c @@ -0,0 +1,1470 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RCC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/** @defgroup RCC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------- */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of HSION bit */ +#define CR_OFFSET (RCC_OFFSET + 0x00) +#define HSION_BitNumber 0x00 +#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) + +/* Alias word address of PLLON bit */ +#define PLLON_BitNumber 0x18 +#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) + +#ifdef STM32F10X_CL + /* Alias word address of PLL2ON bit */ + #define PLL2ON_BitNumber 0x1A + #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) + + /* Alias word address of PLL3ON bit */ + #define PLL3ON_BitNumber 0x1C + #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* Alias word address of CSSON bit */ +#define CSSON_BitNumber 0x13 +#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) + +/* --- CFGR Register ---*/ + +/* Alias word address of USBPRE bit */ +#define CFGR_OFFSET (RCC_OFFSET + 0x04) + +#ifndef STM32F10X_CL + #define USBPRE_BitNumber 0x16 + #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) +#else + #define OTGFSPRE_BitNumber 0x16 + #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* --- BDCR Register ---*/ + +/* Alias word address of RTCEN bit */ +#define BDCR_OFFSET (RCC_OFFSET + 0x20) +#define RTCEN_BitNumber 0x0F +#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) + +/* Alias word address of BDRST bit */ +#define BDRST_BitNumber 0x10 +#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of LSION bit */ +#define CSR_OFFSET (RCC_OFFSET + 0x24) +#define LSION_BitNumber 0x00 +#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) + +#ifdef STM32F10X_CL +/* --- CFGR2 Register ---*/ + + /* Alias word address of I2S2SRC bit */ + #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) + #define I2S2SRC_BitNumber 0x11 + #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) + + /* Alias word address of I2S3SRC bit */ + #define I2S3SRC_BitNumber 0x12 + #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* ---------------------- RCC registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) +#define CR_HSEBYP_Set ((uint32_t)0x00040000) +#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) +#define CR_HSEON_Set ((uint32_t)0x00010000) +#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) + +/* CFGR register bit mask */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) +#else + #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) +#endif /* STM32F10X_CL */ + +#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) +#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) +#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) +#define CFGR_SWS_Mask ((uint32_t)0x0000000C) +#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) +#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) +#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) +#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) +#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) +#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) +#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) +#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) +#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) + +/* CSR register bit mask */ +#define CSR_RMVF_Set ((uint32_t)0x01000000) + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/* CFGR2 register bit mask */ + #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) + #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) +#endif +#ifdef STM32F10X_CL + #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) + #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) + #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) +#endif /* STM32F10X_CL */ + +/* RCC Flag Mask */ +#define FLAG_Mask ((uint8_t)0x1F) + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) + +/* CFGR register byte 4 (Bits[31:24]) base address */ +#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) + +/* BDCR register base address */ +#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) + +/** + * @} + */ + +/** @defgroup RCC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Variables + * @{ + */ + +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; +static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; + +/** + * @} + */ + +/** @defgroup RCC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note HSE can not be stopped if it is used directly or through the PLL as system clock. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: HSE oscillator OFF + * @arg RCC_HSE_ON: HSE oscillator ON + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint32_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + /* Reset HSEON bit */ + RCC->CR &= CR_HSEON_Reset; + /* Reset HSEBYP bit */ + RCC->CR &= CR_HSEBYP_Reset; + /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ + switch(RCC_HSE) + { + case RCC_HSE_ON: + /* Set HSEON bit */ + RCC->CR |= CR_HSEON_Set; + break; + + case RCC_HSE_Bypass: + /* Set HSEBYP and HSEON bits */ + RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; + break; + + default: + break; + } +} + +/** + * @brief Waits for HSE start-up. + * @param None + * @retval An ErrorStatus enumuration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + ErrorStatus status = ERROR; + FlagStatus HSEStatus = RESET; + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @param HSICalibrationValue: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); + tmpreg = RCC->CR; + /* Clear HSITRIM[4:0] bits */ + tmpreg &= CR_HSITRIM_Mask; + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used directly or through the PLL as system clock. + * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the PLL clock source and multiplication factor. + * @note This function must be used only when the PLL is disabled. + * @param RCC_PLLSource: specifies the PLL entry clock source. + * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, + * this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry + * @param RCC_PLLMul: specifies the PLL multiplication factor. + * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} + * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); + + tmpreg = RCC->CFGR; + /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + tmpreg &= CFGR_PLL_Mask; + /* Set the PLL configuration bits */ + tmpreg |= RCC_PLLSource | RCC_PLLMul; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the PLL. + * @note The PLL can not be disabled if it is used as system clock. + * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/** + * @brief Configures the PREDIV1 division factor. + * @note + * - This function must be used only when the PLL is disabled. + * - This function applies only to STM32 Connectivity line and Value line + * devices. + * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. + * This parameter can be one of the following values: + * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock + * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock + * @note + * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE + * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. + * This parameter can be RCC_PREDIV1_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); + assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ + tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); + /* Set the PREDIV1 clock source and division factor */ + tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} +#endif + +#ifdef STM32F10X_CL +/** + * @brief Configures the PREDIV2 division factor. + * @note + * - This function must be used only when both PLL2 and PLL3 are disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. + * This parameter can be RCC_PREDIV2_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV2[3:0] bits */ + tmpreg &= ~CFGR2_PREDIV2; + /* Set the PREDIV2 division factor */ + tmpreg |= RCC_PREDIV2_Div; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + +/** + * @brief Configures the PLL2 multiplication factor. + * @note + * - This function must be used only when the PLL2 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. + * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL2Config(uint32_t RCC_PLL2Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL2Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL2MUL; + /* Set the PLL2 configuration bits */ + tmpreg |= RCC_PLL2Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL2. + * @note + * - The PLL2 can not be disabled if it is used indirectly as system clock + * (i.e. it is used as PLL clock entry that is used as System clock). + * - This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL2Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; +} + + +/** + * @brief Configures the PLL3 multiplication factor. + * @note + * - This function must be used only when the PLL3 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. + * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL3Config(uint32_t RCC_PLL3Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL3Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL3MUL; + /* Set the PLL3 configuration bits */ + tmpreg |= RCC_PLL3Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL3. + * @note This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL3Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the system clock (SYSCLK). + * @param RCC_SYSCLKSource: specifies the clock source used as system clock. + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + tmpreg = RCC->CFGR; + /* Clear SW[1:0] bits */ + tmpreg &= CFGR_SW_Mask; + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can + * be one of the following: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + tmpreg = RCC->CFGR; + /* Clear HPRE[3:0] bits */ + tmpreg &= CFGR_HPRE_Reset_Mask; + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the Low Speed APB clock (PCLK1). + * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB1 clock = HCLK + * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE1[2:0] bits */ + tmpreg &= CFGR_PPRE1_Reset_Mask; + /* Set PPRE1[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the High Speed APB clock (PCLK2). + * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB2 clock = HCLK + * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE2[2:0] bits */ + tmpreg &= CFGR_PPRE2_Reset_Mask; + /* Set PPRE2[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK << 3; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the specified RCC interrupts. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +#ifndef STM32F10X_CL +/** + * @brief Configures the USB clock (USBCLK). + * @param RCC_USBCLKSource: specifies the USB clock source. This clock is + * derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB + * clock source + * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source + * @retval None + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); + + *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; +} +#else +/** + * @brief Configures the USB OTG FS clock (OTGFSCLK). + * This function applies only to STM32 Connectivity line devices. + * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. + * This clock is derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @retval None + */ +void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); + + *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the ADC clock (ADCCLK). + * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from + * the APB2 clock (PCLK2). + * This parameter can be one of the following values: + * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 + * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 + * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 + * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 + * @retval None + */ +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); + tmpreg = RCC->CFGR; + /* Clear ADCPRE[1:0] bits */ + tmpreg &= CFGR_ADCPRE_Reset_Mask; + /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ + tmpreg |= RCC_PCLK2; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +#ifdef STM32F10X_CL +/** + * @brief Configures the I2S2 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S2 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry + * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry + * @retval None + */ +void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; +} + +/** + * @brief Configures the I2S3 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S3 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry + * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry + * @retval None + */ +void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: LSE oscillator OFF + * @arg RCC_LSE_ON: LSE oscillator ON + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Reset LSEBYP bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ + switch(RCC_LSE) + { + case RCC_LSE_ON: + /* Set LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; + break; + + case RCC_LSE_Bypass: + /* Set LSEBYP and LSEON bits */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + + default: + break; + } +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + /* Select the RTC clock source */ + RCC->BDCR |= RCC_RTCCLKSource; +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; +} + +/** + * @brief Returns the frequencies of different on chip clocks. + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * @note The result of this function could be not correct when using + * fractional value for HSE crystal. + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & CFGR_SWS_Mask; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & CFGR_PLLMull_Mask; + pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; + } + else + { + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; + RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + + /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ + /* Get HCLK prescaler */ + tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + /* Get PCLK1 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get PCLK2 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; + tmp = tmp >> 11; + presc = APBAHBPrescTable[tmp]; + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get ADCCLK prescaler */ + tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; + tmp = tmp >> 14; + presc = ADCPrescTable[tmp]; + /* ADCCLK clock frequency */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; +} + +/** + * @brief Enables or disables the AHB peripheral clock. + * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @arg RCC_AHBPeriph_ETH_MAC_Tx + * @arg RCC_AHBPeriph_ETH_MAC_Rx + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_FSMC + * @arg RCC_AHBPeriph_SDIO + * + * @note SRAM and FLITF clock can be disabled only during sleep mode. + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBENR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +#ifdef STM32F10X_CL +/** + * @brief Forces or releases AHB peripheral reset. + * @note This function applies only to STM32 Connectivity line devices. + * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBRSTR |= RCC_AHBPeriph; + } + else + { + RCC->AHBRSTR &= ~RCC_AHBPeriph; + } +} +#endif /* STM32F10X_CL */ + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases the Backup domain reset. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Clock Security System. + * @param NewState: new state of the Clock Security System.. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; +} + +/** + * @brief Selects the clock source to output on MCO pin. + * @param RCC_MCO: specifies the clock source to output. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * @arg RCC_MCO_PLL2CLK: PLL2 clock selected + * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected + * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected + * @arg RCC_MCO_PLL3CLK: PLL3 clock selected + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCO) +{ + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCO)); + + /* Perform Byte access to MCO bits to select the MCO source */ + *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + if (tmp == 1) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 2) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_Mask; + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= CSR_RMVF_Set; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c new file mode 100644 index 00000000..51a9cce7 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c @@ -0,0 +1,908 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SPI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_spi.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +/** @defgroup SPI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup SPI_Private_Defines + * @{ + */ + +/* SPI SPE mask */ +#define CR1_SPE_Set ((uint16_t)0x0040) +#define CR1_SPE_Reset ((uint16_t)0xFFBF) + +/* I2S I2SE mask */ +#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) +#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) + +/* SPI CRCNext mask */ +#define CR1_CRCNext_Set ((uint16_t)0x1000) + +/* SPI CRCEN mask */ +#define CR1_CRCEN_Set ((uint16_t)0x2000) +#define CR1_CRCEN_Reset ((uint16_t)0xDFFF) + +/* SPI SSOE mask */ +#define CR2_SSOE_Set ((uint16_t)0x0004) +#define CR2_SSOE_Reset ((uint16_t)0xFFFB) + +/* SPI registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0x3040) +#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) + +/* SPI or I2S mode selection masks */ +#define SPI_Mode_Select ((uint16_t)0xF7FF) +#define I2S_Mode_Select ((uint16_t)0x0800) + +/* I2S clock source selection masks */ +#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) +#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) +#define I2S_MUL_MASK ((uint32_t)(0x0000F000)) +#define I2S_DIV_MASK ((uint32_t)(0x000000F0)) + +/** + * @} + */ + +/** @defgroup SPI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SPIx peripheral registers to their default + * reset values (Affects also the I2Ss). + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + if (SPIx == SPI1) + { + /* Enable SPI1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + /* Release SPI1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else if (SPIx == SPI2) + { + /* Enable SPI2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Release SPI2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } + else + { + if (SPIx == SPI3) + { + /* Enable SPI3 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); + /* Release SPI3 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); + } + } +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * @retval None + */ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + /* check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Check the SPI parameters */ + assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); + assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); + assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); + assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); + assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); + assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); + assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); + +/*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler + master/salve mode, CPOL and CPHA */ + /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ + /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ + /* Set LSBFirst bit according to SPI_FirstBit value */ + /* Set BR bits according to SPI_BaudRatePrescaler value */ + /* Set CPOL bit according to SPI_CPOL value */ + /* Set CPHA bit according to SPI_CPHA value */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | + SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | + SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | + SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + SPIx->I2SCFGR &= SPI_Mode_Select; + +/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ + /* Write to SPIx CRCPOLY */ + SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral + * (configured in I2S mode). + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * @note + * The function calculates the optimal prescaler needed to obtain the most + * accurate audio frequency (depending on the I2S clock source, the PLL values + * and the product configuration). But in case the prescaler value is greater + * than 511, the default value (0x02) will be configured instead. * + * @retval None + */ +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0; + RCC_ClocksTypeDef RCC_Clocks; + uint32_t sourceclock = 0; + + /* Check the I2S parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; + SPIx->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = SPIx->I2SCFGR; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) */ + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* Get the I2S clock source mask depending on the peripheral number */ + if(((uint32_t)SPIx) == SPI2_BASE) + { + /* The mask is relative to I2S2 */ + tmp = I2S2_CLOCK_SRC; + } + else + { + /* The mask is relative to I2S3 */ + tmp = I2S3_CLOCK_SRC; + } + + /* Check the I2S clock source configuration depending on the Device: + Only Connectivity line devices have the PLL3 VCO clock */ +#ifdef STM32F10X_CL + if((RCC->CFGR2 & tmp) != 0) + { + /* Get the configuration bits of RCC PLL3 multiplier */ + tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12); + + /* Get the value of the PLL3 multiplier */ + if((tmp > 5) && (tmp < 15)) + { + /* Multiplier is between 8 and 14 (value 15 is forbidden) */ + tmp += 2; + } + else + { + if (tmp == 15) + { + /* Multiplier is 20 */ + tmp = 20; + } + } + /* Get the PREDIV2 value */ + sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1); + + /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */ + sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); + } + else + { + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; + } +#else /* STM32F10X_HD */ + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; +#endif /* STM32F10X_CL */ + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + /* Remove the floating point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /* Write to SPIx I2SPR register the computed value */ + SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + SPIx->I2SCFGR = tmpreg; +} + +/** + * @brief Fills each SPI_InitStruct member with its default value. + * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized. + * @retval None + */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) +{ +/*--------------- Reset SPI init structure parameters values -----------------*/ + /* Initialize the SPI_Direction member */ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + /* initialize the SPI_Mode member */ + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + /* initialize the SPI_DataSize member */ + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + /* Initialize the SPI_CPOL member */ + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + /* Initialize the SPI_CPHA member */ + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + /* Initialize the SPI_NSS member */ + SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; + /* Initialize the SPI_BaudRatePrescaler member */ + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + /* Initialize the SPI_FirstBit member */ + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + /* Initialize the SPI_CRCPolynomial member */ + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/** + * @brief Fills each I2S_InitStruct member with its default value. + * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) +{ +/*--------------- Reset I2S init structure parameters values -----------------*/ + /* Initialize the I2S_Mode member */ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + + /* Initialize the I2S_Standard member */ + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + + /* Initialize the I2S_DataFormat member */ + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + + /* Initialize the I2S_MCLKOutput member */ + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + + /* Initialize the I2S_AudioFreq member */ + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + + /* Initialize the I2S_CPOL member */ + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/** + * @brief Enables or disables the specified SPI peripheral. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral */ + SPIx->CR1 |= CR1_SPE_Set; + } + else + { + /* Disable the selected SPI peripheral */ + SPIx->CR1 &= CR1_SPE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; + } + else + { + /* Disable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI/I2S interrupts. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask + * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask + * @arg SPI_I2S_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified SPI/I2S interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0 ; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = (uint16_t)1 << (uint16_t)itpos; + + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S interrupt */ + SPIx->CR2 |= itmask; + } + else + { + /* Disable the selected SPI/I2S interrupt */ + SPIx->CR2 &= (uint16_t)~itmask; + } +} + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request + * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request + * @param NewState: new state of the selected SPI/I2S DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S DMA requests */ + SPIx->CR2 |= SPI_I2S_DMAReq; + } + else + { + /* Disable the selected SPI/I2S DMA requests */ + SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param Data : Data to be transmitted. + * @retval None + */ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Write in the DR register the data to be sent */ + SPIx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @retval The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the data in the DR register */ + return SPIx->DR; +} + +/** + * @brief Configures internally by software the NSS pin for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. + * This parameter can be one of the following values: + * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally + * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally + * @retval None + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); + if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + /* Set NSS pin internally by software */ + SPIx->CR1 |= SPI_NSSInternalSoft_Set; + } + else + { + /* Reset NSS pin internally by software */ + SPIx->CR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/** + * @brief Enables or disables the SS output for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx SS output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI SS output */ + SPIx->CR2 |= CR2_SSOE_Set; + } + else + { + /* Disable the selected SPI SS output */ + SPIx->CR2 &= CR2_SSOE_Reset; + } +} + +/** + * @brief Configures the data size for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_DataSize: specifies the SPI data size. + * This parameter can be one of the following values: + * @arg SPI_DataSize_16b: Set data frame format to 16bit + * @arg SPI_DataSize_8b: Set data frame format to 8bit + * @retval None + */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DATASIZE(SPI_DataSize)); + /* Clear DFF bit */ + SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; + /* Set new DFF bit value */ + SPIx->CR1 |= SPI_DataSize; +} + +/** + * @brief Transmit the SPIx CRC value. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_TransmitCRC(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Enable the selected SPI CRC transmission */ + SPIx->CR1 |= CR1_CRCNext_Set; +} + +/** + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx CRC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI CRC calculation */ + SPIx->CR1 |= CR1_CRCEN_Set; + } + else + { + /* Disable the selected SPI CRC calculation */ + SPIx->CR1 &= CR1_CRCEN_Reset; + } +} + +/** + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_CRC: specifies the CRC register to be read. + * This parameter can be one of the following values: + * @arg SPI_CRC_Tx: Selects Tx CRC register + * @arg SPI_CRC_Rx: Selects Rx CRC register + * @retval The selected CRC register value.. + */ +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC(SPI_CRC)); + if (SPI_CRC != SPI_CRC_Rx) + { + /* Get the Tx CRC register */ + crcreg = SPIx->TXCRCR; + } + else + { + /* Get the Rx CRC register */ + crcreg = SPIx->RXCRCR; + } + /* Return the selected CRC register */ + return crcreg; +} + +/** + * @brief Returns the CRC Polynomial register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the CRC polynomial register */ + return SPIx->CRCPR; +} + +/** + * @brief Selects the data transfer direction in bi-directional mode for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_Direction: specifies the data transfer direction in bi-directional mode. + * This parameter can be one of the following values: + * @arg SPI_Direction_Tx: Selects Tx transmission direction + * @arg SPI_Direction_Rx: Selects Rx receive direction + * @retval None + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DIRECTION(SPI_Direction)); + if (SPI_Direction == SPI_Direction_Tx) + { + /* Set the Tx only mode */ + SPIx->CR1 |= SPI_Direction_Tx; + } + else + { + /* Set the Rx only mode */ + SPIx->CR1 &= SPI_Direction_Rx; + } +} + +/** + * @brief Checks whether the specified SPI/I2S flag is set or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. + * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. + * @arg SPI_I2S_FLAG_BSY: Busy flag. + * @arg SPI_I2S_FLAG_OVR: Overrun flag. + * @arg SPI_FLAG_MODF: Mode Fault flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * @arg I2S_FLAG_UDR: Underrun Error flag. + * @arg I2S_FLAG_CHSIDE: Channel Side flag. + * @retval The new state of SPI_I2S_FLAG (SET or RESET). + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); + /* Check the status of the specified SPI/I2S flag */ + if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + /* SPI_I2S_FLAG is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_FLAG is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_FLAG: specifies the SPI flag to clear. + * This function clears only CRCERR flag. + * @note + * - OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). + * - UDR (UnderRun error) flag is cleared by a read operation to + * SPI_SR register (SPI_I2S_GetFlagStatus()). + * - MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a + * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). + * @retval None + */ +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); + + /* Clear the selected SPI CRC Error (CRCERR) flag */ + SPIx->SR = (uint16_t)~SPI_I2S_FLAG; +} + +/** + * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. + * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. + * @arg SPI_I2S_IT_OVR: Overrun interrupt. + * @arg SPI_IT_MODF: Mode Fault interrupt. + * @arg SPI_IT_CRCERR: CRC Error interrupt. + * @arg I2S_IT_UDR: Underrun Error interrupt. + * @retval The new state of SPI_I2S_IT (SET or RESET). + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Get the SPI/I2S IT mask */ + itmask = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = 0x01 << itmask; + + /* Get the SPI_I2S_IT enable bit status */ + enablestatus = (SPIx->CR2 & itmask) ; + + /* Check the status of the specified SPI/I2S interrupt */ + if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) + { + /* SPI_I2S_IT is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_IT is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_IT status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. + * This function clears only CRCERR interrupt pending bit. + * @note + * - OVR (OverRun Error) interrupt pending bit is cleared by software + * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) + * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - UDR (UnderRun Error) interrupt pending bit is cleared by a read + * operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: + * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) + * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable + * the SPI). + * @retval None + */ +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + uint16_t itpos = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); + + /* Get the SPI IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ + SPIx->SR = (uint16_t)~itpos; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c new file mode 100644 index 00000000..a3f16f15 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c @@ -0,0 +1,1058 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the USART firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_usart.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +/** @defgroup USART_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Defines + * @{ + */ + +#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */ +#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */ + +#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */ + +#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */ +#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */ +#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */ +#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */ +#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */ + +#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */ +#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */ + +#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */ +#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */ +#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */ + +#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */ +#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */ + +#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */ +#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */ + +#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */ +#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */ + +#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */ +#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */ + +#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */ +#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */ +#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */ +#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */ +#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */ + +/* USART OverSampling-8 Mask */ +#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */ +#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */ + +/* USART One Bit Sampling Mask */ +#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */ +#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */ + +/** + * @} + */ + +/** @defgroup USART_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the USARTx peripheral registers to their default reset values. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_DeInit(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + if (USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if (USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if (USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if (USARTx == UART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); + } + else + { + if (USARTx == UART5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); + } + } +} + +/** + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct . + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * that contains the configuration information for the specified USART + * peripheral. + * @retval None + */ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) +{ + uint32_t tmpreg = 0x00, apbclock = 0x00; + uint32_t integerdivider = 0x00; + uint32_t fractionaldivider = 0x00; + uint32_t usartxbase = 0; + RCC_ClocksTypeDef RCC_ClocksStatus; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); + assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); + assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); + assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); + assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); + assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); + /* The hardware flow control is available only for USART1, USART2 and USART3 */ + if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear STOP[13:12] bits */ + tmpreg &= CR2_STOP_CLEAR_Mask; + /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ + /* Set STOP[13:12] bits according to USART_StopBits value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; + +/*---------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = USARTx->CR1; + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure the USART Word Length, Parity and mode ----------------------- */ + /* Set the M bits according to USART_WordLength value */ + /* Set PCE and PS bits according to USART_Parity value */ + /* Set TE and RE bits according to USART_Mode value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + /* Write to USART CR1 */ + USARTx->CR1 = (uint16_t)tmpreg; + +/*---------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = USARTx->CR3; + /* Clear CTSE and RTSE bits */ + tmpreg &= CR3_CLEAR_Mask; + /* Configure the USART HFC -------------------------------------------------*/ + /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + /* Write to USART CR3 */ + USARTx->CR3 = (uint16_t)tmpreg; + +/*---------------------------- USART BRR Configuration -----------------------*/ + /* Configure the USART Baud Rate -------------------------------------------*/ + RCC_GetClocksFreq(&RCC_ClocksStatus); + if (usartxbase == USART1_BASE) + { + apbclock = RCC_ClocksStatus.PCLK2_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK1_Frequency; + } + + /* Determine the integer part */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + /* Integer part computing in case Oversampling mode is 8 Samples */ + integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + /* Integer part computing in case Oversampling mode is 16 Samples */ + integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); + } + tmpreg = (integerdivider / 100) << 4; + + /* Determine the fractional part */ + fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); + + /* Implement the fractional part in the register */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); + } + + /* Write to USART BRR */ + USARTx->BRR = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_InitStruct member with its default value. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * which will be initialized. + * @retval None + */ +void USART_StructInit(USART_InitTypeDef* USART_InitStruct) +{ + /* USART_InitStruct members default value */ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No ; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/** + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct . + * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure that contains the configuration information for the specified + * USART peripheral. + * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. + * @retval None + */ +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); + assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); + assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); + assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear CLKEN, CPOL, CPHA and LBCL bits */ + tmpreg &= CR2_CLOCK_CLEAR_Mask; + /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ + /* Set CLKEN bit according to USART_Clock value */ + /* Set CPOL bit according to USART_CPOL value */ + /* Set CPHA bit according to USART_CPHA value */ + /* Set LBCL bit according to USART_LastBit value */ + tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_ClockInitStruct member with its default value. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure which will be initialized. + * @retval None + */ +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + /* USART_ClockInitStruct members default value */ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/** + * @brief Enables or disables the specified USART peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USARTx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART by setting the UE bit in the CR1 register */ + USARTx->CR1 |= CR1_UE_Set; + } + else + { + /* Disable the selected USART by clearing the UE bit in the CR1 register */ + USARTx->CR1 &= CR1_UE_Reset; + } +} + +/** + * @brief Enables or disables the specified USART interrupts. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @param NewState: new state of the specified USARTx interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; + uint32_t usartxbase = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CONFIG_IT(USART_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + + /* Get the interrupt position */ + itpos = USART_IT & IT_Mask; + itmask = (((uint32_t)0x01) << itpos); + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + usartxbase += 0x0C; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + usartxbase += 0x10; + } + else /* The IT is in CR3 register */ + { + usartxbase += 0x14; + } + if (NewState != DISABLE) + { + *(__IO uint32_t*)usartxbase |= itmask; + } + else + { + *(__IO uint32_t*)usartxbase &= ~itmask; + } +} + +/** + * @brief Enables or disables the USART’s DMA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_DMAReq: specifies the DMA request. + * This parameter can be any combination of the following values: + * @arg USART_DMAReq_Tx: USART DMA transmit request + * @arg USART_DMAReq_Rx: USART DMA receive request + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @note The DMA mode is not available for UART5 except in the STM32 + * High density value line devices(STM32F10X_HD_VL). + * @retval None + */ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAREQ(USART_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the DMA transfer for selected requests by setting the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 |= USART_DMAReq; + } + else + { + /* Disable the DMA transfer for selected requests by clearing the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 &= (uint16_t)~USART_DMAReq; + } +} + +/** + * @brief Sets the address of the USART node. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Address: Indicates the address of the USART node. + * @retval None + */ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_ADDRESS(USART_Address)); + + /* Clear the USART address */ + USARTx->CR2 &= CR2_Address_Mask; + /* Set the USART address node */ + USARTx->CR2 |= USART_Address; +} + +/** + * @brief Selects the USART WakeUp method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_WakeUp: specifies the USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection + * @arg USART_WakeUp_AddressMark: WakeUp by an address mark + * @retval None + */ +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_WAKEUP(USART_WakeUp)); + + USARTx->CR1 &= CR1_WAKE_Mask; + USARTx->CR1 |= USART_WakeUp; +} + +/** + * @brief Determines if the USART is in mute mode or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART mute mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + USARTx->CR1 |= CR1_RWU_Set; + } + else + { + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + USARTx->CR1 &= CR1_RWU_Reset; + } +} + +/** + * @brief Sets the USART LIN Break detection length. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_LINBreakDetectLength: specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg USART_LINBreakDetectLength_10b: 10-bit break detection + * @arg USART_LINBreakDetectLength_11b: 11-bit break detection + * @retval None + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); + + USARTx->CR2 &= CR2_LBDL_Mask; + USARTx->CR2 |= USART_LINBreakDetectLength; +} + +/** + * @brief Enables or disables the USART’s LIN mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART LIN mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + USARTx->CR2 |= CR2_LINEN_Set; + } + else + { + /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ + USARTx->CR2 &= CR2_LINEN_Reset; + } +} + +/** + * @brief Transmits single data through the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param Data: the data to transmit. + * @retval None + */ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DATA(Data)); + + /* Transmit Data */ + USARTx->DR = (Data & (uint16_t)0x01FF); +} + +/** + * @brief Returns the most recent received data by the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Receive Data */ + return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); +} + +/** + * @brief Transmits break characters. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_SendBreak(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Send break characters */ + USARTx->CR1 |= CR1_SBK_Set; +} + +/** + * @brief Sets the specified USART guard time. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param USART_GuardTime: specifies the guard time. + * @note The guard time bits are not available for UART4 and UART5. + * @retval None + */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the USART Guard time */ + USARTx->GTPR &= GTPR_LSB_Mask; + /* Set the USART guard time */ + USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/** + * @brief Sets the system clock prescaler. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Prescaler: specifies the prescaler clock. + * @note The function is used for IrDA mode with UART4 and UART5. + * @retval None + */ +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Clear the USART prescaler */ + USARTx->GTPR &= GTPR_MSB_Mask; + /* Set the USART prescaler */ + USARTx->GTPR |= USART_Prescaler; +} + +/** + * @brief Enables or disables the USART’s Smart Card mode. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the Smart Card mode. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + USARTx->CR3 |= CR3_SCEN_Set; + } + else + { + /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ + USARTx->CR3 &= CR3_SCEN_Reset; + } +} + +/** + * @brief Enables or disables NACK transmission. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the NACK transmission. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ + USARTx->CR3 |= CR3_NACK_Set; + } + else + { + /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ + USARTx->CR3 &= CR3_NACK_Reset; + } +} + +/** + * @brief Enables or disables the USART’s Half Duplex communication. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART Communication. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + USARTx->CR3 |= CR3_HDSEL_Set; + } + else + { + /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ + USARTx->CR3 &= CR3_HDSEL_Reset; + } +} + + +/** + * @brief Enables or disables the USART's 8x oversampling mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @note + * This function has to be called before calling USART_Init() + * function in order to have correct baudrate Divider value. + * @retval None + */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ + USARTx->CR1 |= CR1_OVER8_Set; + } + else + { + /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ + USARTx->CR1 &= CR1_OVER8_Reset; + } +} + +/** + * @brief Enables or disables the USART's one bit sampling method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ + USARTx->CR3 |= CR3_ONEBITE_Set; + } + else + { + /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */ + USARTx->CR3 &= CR3_ONEBITE_Reset; + } +} + +/** + * @brief Configures the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IrDAMode: specifies the IrDA mode. + * This parameter can be one of the following values: + * @arg USART_IrDAMode_LowPower + * @arg USART_IrDAMode_Normal + * @retval None + */ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); + + USARTx->CR3 &= CR3_IRLP_Mask; + USARTx->CR3 |= USART_IrDAMode; +} + +/** + * @brief Enables or disables the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the IrDA mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + USARTx->CR3 |= CR3_IREN_Set; + } + else + { + /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ + USARTx->CR3 &= CR3_IREN_Reset; + } +} + +/** + * @brief Checks whether the specified USART flag is set or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg USART_FLAG_LBD: LIN Break detection flag + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of USART_FLAG (SET or RESET). + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if (USART_FLAG == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the USARTx's pending flags. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg USART_FLAG_LBD: LIN Break detection flag. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) + * followed by a read operation to USART_DR register (USART_ReceiveData()). + * - RXNE flag can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC flag can be also cleared by software sequence: a read operation to + * USART_SR register (USART_GetFlagStatus()) followed by a write operation + * to USART_DR register (USART_SendData()). + * - TXE flag is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + USARTx->SR = (uint16_t)~USART_FLAG; +} + +/** + * @brief Checks whether the specified USART interrupt has occurred or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Tansmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE: OverRun Error interrupt + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of USART_IT (SET or RESET). + */ +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_GET_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + /* Get the interrupt position */ + itmask = USART_IT & IT_Mask; + itmask = (uint32_t)0x01 << itmask; + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + itmask &= USARTx->CR1; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + itmask &= USARTx->CR2; + } + else /* The IT is in CR3 register */ + { + itmask &= USARTx->CR3; + } + + bitpos = USART_IT >> 0x08; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->SR; + if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/** + * @brief Clears the USARTx's interrupt pending bits. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) pending bits are cleared by + * software sequence: a read operation to USART_SR register + * (USART_GetITStatus()) followed by a read operation to USART_DR register + * (USART_ReceiveData()). + * - RXNE pending bit can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC pending bit can be also cleared by software sequence: a read + * operation to USART_SR register (USART_GetITStatus()) followed by a write + * operation to USART_DR register (USART_SendData()). + * - TXE pending bit is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint16_t bitpos = 0x00, itmask = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + bitpos = USART_IT >> 0x08; + itmask = ((uint16_t)0x01 << (uint16_t)bitpos); + USARTx->SR = (uint16_t)~itmask; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/stm32f10x_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/stm32f10x_conf.h new file mode 100644 index 00000000..d606cd37 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/STM32F10x_StdPeriph_Driver/stm32f10x_conf.h @@ -0,0 +1,77 @@ +/** + ****************************************************************************** + * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_conf.h + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CONF_H +#define __STM32F10x_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ +/*#include "stm32f10x_adc.h"*/ +/*#include "stm32f10x_bkp.h"*/ +/*#include "stm32f10x_can.h"*/ +/*#include "stm32f10x_cec.h"*/ +/*#include "stm32f10x_crc.h"*/ +/*#include "stm32f10x_dac.h"*/ +/*#include "stm32f10x_dbgmcu.h"*/ +/*#include "stm32f10x_dma.h"*/ +/*#include "stm32f10x_exti.h"*/ +/*#include "stm32f10x_flash.h"*/ +/*#include "stm32f10x_fsmc.h"*/ +#include "stm32f10x_gpio.h" /* needed for configuring the SPI and UART pins */ +/*#include "stm32f10x_i2c.h"*/ +/*#include "stm32f10x_iwdg.h"*/ +/*#include "stm32f10x_pwr.h"*/ +#include "stm32f10x_rcc.h" /* needed for enabling the SPI and UART peripherals */ +/*#include "stm32f10x_rtc.h"*/ +/*#include "stm32f10x_sdio.h"*/ +#include "stm32f10x_spi.h" /* needed for low-level interfacing with SD-card */ +/*#include "stm32f10x_tim.h"*/ +#include "stm32f10x_usart.h" /* needed for UART logging during firmware updates from SD-card */ +/*#include "stm32f10x_wwdg.h"*/ +/*#include "misc.h"*/ /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function which reports + * the name of the source file and the source line number of the call + * that failed. If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F10x_CONF_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/ffconf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/ffconf.h new file mode 100644 index 00000000..c51b9383 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/ffconf.h @@ -0,0 +1,266 @@ +/*---------------------------------------------------------------------------/ +/ FatFs - FAT file system module configuration file R0.12 (C)ChaN, 2016 +/---------------------------------------------------------------------------*/ + +#define _FFCONF 88100 /* Revision ID */ + +/*---------------------------------------------------------------------------/ +/ Function Configurations +/---------------------------------------------------------------------------*/ + +#define _FS_READONLY 0 +/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) +/ Read-only configuration removes writing API functions, f_write(), f_sync(), +/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() +/ and optional writing functions as well. */ + + +#define _FS_MINIMIZE 0 +/* This option defines minimization level to remove some basic API functions. +/ +/ 0: All basic functions are enabled. +/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename() +/ are removed. +/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. +/ 3: f_lseek() function is removed in addition to 2. */ + + +#define _USE_STRFUNC 2 /* 0:Disable or 1-2:Enable */ +/* This option switches string functions, f_gets(), f_putc(), f_puts() and +/ f_printf(). +/ +/ 0: Disable string functions. +/ 1: Enable without LF-CRLF conversion. +/ 2: Enable with LF-CRLF conversion. */ + + +#define _USE_FIND 0 +/* This option switches filtered directory read functions, f_findfirst() and +/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */ + + +#define _USE_MKFS 0 +/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ + + +#define _USE_FASTSEEK 0 +/* This option switches fast seek function. (0:Disable or 1:Enable) */ + + +#define _USE_EXPAND 0 +/* This option switches f_expand function. (0:Disable or 1:Enable) */ + + +#define _USE_CHMOD 0 +/* This option switches attribute manipulation functions, f_chmod() and f_utime(). +/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */ + + +#define _USE_LABEL 0 +/* This option switches volume label functions, f_getlabel() and f_setlabel(). +/ (0:Disable or 1:Enable) */ + + +#define _USE_FORWARD 0 +/* This option switches f_forward() function. (0:Disable or 1:Enable) +/ To enable it, also _FS_TINY need to be 1. */ + + +/*---------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/---------------------------------------------------------------------------*/ + +#define _CODE_PAGE 437 +/* This option specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 1 - ASCII (No extended character. Non-LFN cfg. only) +/ 437 - U.S. +/ 720 - Arabic +/ 737 - Greek +/ 771 - KBL +/ 775 - Baltic +/ 850 - Latin 1 +/ 852 - Latin 2 +/ 855 - Cyrillic +/ 857 - Turkish +/ 860 - Portuguese +/ 861 - Icelandic +/ 862 - Hebrew +/ 863 - Canadian French +/ 864 - Arabic +/ 865 - Nordic +/ 866 - Russian +/ 869 - Greek 2 +/ 932 - Japanese (DBCS) +/ 936 - Simplified Chinese (DBCS) +/ 949 - Korean (DBCS) +/ 950 - Traditional Chinese (DBCS) +*/ + + +#define _USE_LFN 1 /* 0 to 3 */ +#define _MAX_LFN 255 +/* The _USE_LFN switches the support of long file name (LFN). +/ +/ 0: Disable support of LFN. _MAX_LFN has no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added +/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and +/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255. +/ It should be set 255 to support full featured LFN operations. +/ When use stack for the working buffer, take care on stack overflow. When use heap +/ memory for the working buffer, memory management functions, ff_memalloc() and +/ ff_memfree(), must be added to the project. */ + + +#define _LFN_UNICODE 0 +/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode) +/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1. +/ This option also affects behavior of string I/O functions. */ + + +#define _STRF_ENCODE 3 +/* When _LFN_UNICODE == 1, this option selects the character encoding on the file to +/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). +/ +/ 0: ANSI/OEM +/ 1: UTF-16LE +/ 2: UTF-16BE +/ 3: UTF-8 +/ +/ This option has no effect when _LFN_UNICODE == 0. */ + + +#define _FS_RPATH 0 +/* This option configures support of relative path. +/ +/ 0: Disable relative path and remove related functions. +/ 1: Enable relative path. f_chdir() and f_chdrive() are available. +/ 2: f_getcwd() function is available in addition to 1. +*/ + + +/*---------------------------------------------------------------------------/ +/ Drive/Volume Configurations +/---------------------------------------------------------------------------*/ + +#define _VOLUMES 1 +/* Number of volumes (logical drives) to be used. */ + + +#define _STR_VOLUME_ID 0 +#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" +/* _STR_VOLUME_ID switches string support of volume ID. +/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive +/ number in the path name. _VOLUME_STRS defines the drive ID strings for each +/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for +/ the drive ID strings are: A-Z and 0-9. */ + + +#define _MULTI_PARTITION 0 +/* This option switches support of multi-partition on a physical drive. +/ By default (0), each logical drive number is bound to the same physical drive +/ number and only an FAT volume found on the physical drive will be mounted. +/ When multi-partition is enabled (1), each logical drive number can be bound to +/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk() +/ funciton will be available. */ + + +#define _MIN_SS 512 +#define _MAX_SS 512 +/* These options configure the range of sector size to be supported. (512, 1024, +/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and +/ harddisk. But a larger value may be required for on-board flash memory and some +/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured +/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the +/ disk_ioctl() function. */ + + +#define _USE_TRIM 0 +/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable) +/ To enable Trim function, also CTRL_TRIM command should be implemented to the +/ disk_ioctl() function. */ + + +#define _FS_NOFSINFO 0 +/* If you need to know correct free space on the FAT32 volume, set bit 0 of this +/ option, and f_getfree() function at first time after volume mount will force +/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. +/ +/ bit0=0: Use free cluster count in the FSINFO if available. +/ bit0=1: Do not trust free cluster count in the FSINFO. +/ bit1=0: Use last allocated cluster number in the FSINFO if available. +/ bit1=1: Do not trust last allocated cluster number in the FSINFO. +*/ + + + +/*---------------------------------------------------------------------------/ +/ System Configurations +/---------------------------------------------------------------------------*/ + +#define _FS_TINY 0 +/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) +/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS bytes. +/ Instead of private sector buffer eliminated from the file object, common sector +/ buffer in the file system object (FATFS) is used for the file data transfer. */ + + +#define _FS_EXFAT 0 +/* This option switches support of exFAT file system in addition to the traditional +/ FAT file system. (0:Disable or 1:Enable) To enable exFAT, also LFN must be enabled. +/ Note that enabling exFAT discards C89 compatibility. */ + + +#define _FS_NORTC 1 +#define _NORTC_MON 3 +#define _NORTC_MDAY 1 +#define _NORTC_YEAR 2016 +/* The option _FS_NORTC switches timestamp functiton. If the system does not have +/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable +/ the timestamp function. All objects modified by FatFs will have a fixed timestamp +/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time. +/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be +/ added to the project to get current time form real-time clock. _NORTC_MON, +/ _NORTC_MDAY and _NORTC_YEAR have no effect. +/ These options have no effect at read-only configuration (_FS_READONLY = 1). */ + + +#define _FS_LOCK 0 +/* The option _FS_LOCK switches file lock function to control duplicated file open +/ and illegal operation to open objects. This option must be 0 when _FS_READONLY +/ is 1. +/ +/ 0: Disable file lock function. To avoid volume corruption, application program +/ should avoid illegal open, remove and rename to the open objects. +/ >0: Enable file lock function. The value defines how many files/sub-directories +/ can be opened simultaneously under file lock control. Note that the file +/ lock control is independent of re-entrancy. */ + + +#define _FS_REENTRANT 0 +#define _FS_TIMEOUT 1000 +#define _SYNC_t HANDLE +/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs +/ module itself. Note that regardless of this option, file access to different +/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() +/ and f_fdisk() function, are always not re-entrant. Only file/directory access +/ to the same volume is under control of this function. +/ +/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. +/ 1: Enable re-entrancy. Also user provided synchronization handlers, +/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() +/ function, must be added to the project. Samples are available in +/ option/syscall.c. +/ +/ The _FS_TIMEOUT defines timeout period in unit of time tick. +/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, +/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be +/ included somewhere in the scope of ff.c. */ + + +/*--- End of configuration options ---*/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/mmc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/mmc.c new file mode 100644 index 00000000..895d3233 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/lib/fatfs/mmc.c @@ -0,0 +1,670 @@ +/*------------------------------------------------------------------------/ +/ MMCv3/SDv1/SDv2 (in SPI mode) control module +/-------------------------------------------------------------------------/ +/ +/ Copyright (C) 2013, ChaN, all right reserved. +/ +/ * This software is a free software and there is NO WARRANTY. +/ * No restriction on use. You can use, modify and redistribute it for +/ personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY. +/ * Redistributions of source code must retain the above copyright notice. +/ +/-------------------------------------------------------------------------*/ + + +/* + * This file was modified from a sample available from the FatFs + * web site. It was modified to work with a Olimex STM32-P103 + * evaluation board. + * + */ +#include "diskio.h" +#include "stm32f10x.h" /* STM32 registers */ +#include "stm32f10x_conf.h" /* STM32 peripheral drivers */ +#include "boot.h" + + +/*-------------------------------------------------------------------------- + + Macro Definitions + +---------------------------------------------------------------------------*/ +/* MMC card type flags (MMC_GET_TYPE) */ +#define CT_MMC 0x01 /* MMC ver 3 */ +#define CT_SD1 0x02 /* SD ver 1 */ +#define CT_SD2 0x04 /* SD ver 2 */ +#define CT_SDC (CT_SD1|CT_SD2) /* SD */ +#define CT_BLOCK 0x08 /* Block addressing */ + + +/*-------------------------------------------------------------------------- + + Module Private Functions + +---------------------------------------------------------------------------*/ + +/* Definitions for MMC/SDC command */ +#define CMD0 (0) /* GO_IDLE_STATE */ +#define CMD1 (1) /* SEND_OP_COND */ +#define ACMD41 (41|0x80) /* SEND_OP_COND (SDC) */ +#define CMD8 (8) /* SEND_IF_COND */ +#define CMD9 (9) /* SEND_CSD */ +#define CMD10 (10) /* SEND_CID */ +#define CMD12 (12) /* STOP_TRANSMISSION */ +#define ACMD13 (13|0x80) /* SD_STATUS (SDC) */ +#define CMD16 (16) /* SET_BLOCKLEN */ +#define CMD17 (17) /* READ_SINGLE_BLOCK */ +#define CMD18 (18) /* READ_MULTIPLE_BLOCK */ +#define CMD23 (23) /* SET_BLOCK_COUNT */ +#define ACMD23 (23|0x80) /* SET_WR_BLK_ERASE_COUNT (SDC) */ +#define CMD24 (24) /* WRITE_BLOCK */ +#define CMD25 (25) /* WRITE_MULTIPLE_BLOCK */ +#define CMD41 (41) /* SEND_OP_COND (ACMD) */ +#define CMD55 (55) /* APP_CMD */ +#define CMD58 (58) /* READ_OCR */ + + +/* Control signals (Platform dependent) */ +#define CS_LOW() GPIO_ResetBits(GPIOB, GPIO_Pin_12) /* MMC CS = L */ +#define CS_HIGH() GPIO_SetBits(GPIOB, GPIO_Pin_12) /* MMC CS = H */ + + + +#define FCLK_SLOW() /* Set slow clock (100k-400k) */ +#define FCLK_FAST() set_max_speed() /* Set fast clock (depends on the CSD) */ + +static volatile +DSTATUS Stat = STA_NOINIT; /* Disk status */ + +static +UINT CardType; + + +/*-----------------------------------------------------------------------*/ +/* Send 80 or so clock transitions with CS and DI held high. This is */ +/* required after card power up to get it into SPI mode */ +/*-----------------------------------------------------------------------*/ +static +void send_initial_clock_train(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + unsigned int i; + + /* Ensure CS is held high. */ + CS_HIGH(); + + /* Switch the SSI TX line to a GPIO and drive it high too. */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_SetBits(GPIOB, GPIO_Pin_15); + + /* Send 10 bytes over the SSI. This causes the clock to wiggle the */ + /* required number of times. */ + for(i = 0 ; i < 10 ; i++) + { + /* Loop while DR register in not empty */ + while (SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_TXE) == RESET) { ; } + + /* Send byte through the SPI peripheral */ + SPI_I2S_SendData(SPI2, 0xff); + + /* Wait to receive a byte */ + while (SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) == RESET) { ; } + } + + /* Revert to hardware control of the SSI TX line. */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOB, &GPIO_InitStructure); +} + + +/*-----------------------------------------------------------------------*/ +/* Power Control (Platform dependent) */ +/*-----------------------------------------------------------------------*/ +/* When the target system does not support socket power control, there */ +/* is nothing to do in these functions. */ + +static +void power_on (void) +{ + SPI_InitTypeDef SPI_InitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + + /* + * This doesn't really turn the power on, but initializes the + * SSI port and pins needed to talk to the card. + */ + + /* Enable GPIO clock for CS */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + /* Enable SPI clock, SPI2: APB1 */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Configure I/O for Flash Chip select (PB12) */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOB, &GPIO_InitStructure); + + /* De-select the Card: Chip Select high */ + GPIO_SetBits(GPIOB, GPIO_Pin_12); + + /* Configure SPI pins: SCK (PB13) and MOSI (PB15) with default alternate function (not re-mapped) push-pull */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13 | GPIO_Pin_15; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOB, &GPIO_InitStructure); + /* Configure MISO (PB14) as Input with internal pull-up */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_14; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + + /* SPI configuration */ + SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; + SPI_InitStructure.SPI_Mode = SPI_Mode_Master; + SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; + SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; + SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; + SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; + SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256; // 72000kHz/256=281kHz < 400kHz + SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; + SPI_InitStructure.SPI_CRCPolynomial = 7; + + SPI_Init(SPI2, &SPI_InitStructure); + SPI_CalculateCRC(SPI2, DISABLE); + SPI_Cmd(SPI2, ENABLE); + + /* Set DI and CS high and apply more than 74 pulses to SCLK for the card */ + /* to be able to accept a native command. */ + send_initial_clock_train(); + +} +// set the SSI speed to the max setting +static +void set_max_speed(void) +{ + SPI_InitTypeDef SPI_InitStructure; + + /* Disable the SPI system */ + SPI_Cmd(SPI2, DISABLE); + + /* MMC/SDC can work at the clock frequency up to 20/25MHz so pick a speed close to + * this but not higher + */ + SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; + SPI_InitStructure.SPI_Mode = SPI_Mode_Master; + SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; + SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; + SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; + SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; + SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4; // 72MHz/4=18MHz < 20MHz + SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; + SPI_InitStructure.SPI_CRCPolynomial = 7; + SPI_Init(SPI2, &SPI_InitStructure); + SPI_CalculateCRC(SPI2, DISABLE); + + /* Enable the SPI system */ + SPI_Cmd(SPI2, ENABLE); +} + +static +void power_off (void) +{ + Stat |= STA_NOINIT; /* Force uninitialized */ +} + + +/*-----------------------------------------------------------------------*/ +/* Transmit/Receive data to/from MMC via SPI (Platform dependent) */ +/*-----------------------------------------------------------------------*/ + +static +BYTE xchg_spi (BYTE dat) +{ + /* Send byte through the SPI peripheral */ + SPI_I2S_SendData(SPI2, dat); + + /* Wait to receive a byte */ + while (SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_RXNE) == RESET) { ; } + + /* Return the byte read from the SPI bus */ + return (BYTE)SPI_I2S_ReceiveData(SPI2); +} + +static +void rcvr_spi_m (BYTE *dst) +{ + *dst = xchg_spi(0xFF); +} + + +/*-----------------------------------------------------------------------*/ +/* Wait for card ready */ +/*-----------------------------------------------------------------------*/ + +static +int wait_ready (void) +{ + BYTE d; + DWORD timeOutTime; + + /* set timeout for 500 ms from now */ + timeOutTime = TimerGet() + 500; + + do { + d = xchg_spi(0xFF); + } while ((d != 0xFF) && (TimerGet() < timeOutTime)); + + return (d == 0xFF) ? 1 : 0; +} + + +/*-----------------------------------------------------------------------*/ +/* Deselect the card and release SPI bus */ +/*-----------------------------------------------------------------------*/ + +static +void deselect (void) +{ + CS_HIGH(); + xchg_spi(0xFF); /* Dummy clock (force DO hi-z for multiple slave SPI) */ +} + + + +/*-----------------------------------------------------------------------*/ +/* Select the card and wait ready */ +/*-----------------------------------------------------------------------*/ + +static +int select (void) /* 1:Successful, 0:Timeout */ +{ + CS_LOW(); + xchg_spi(0xFF); /* Dummy clock (force DO enabled) */ + + if (wait_ready()) return 1; /* OK */ + deselect(); + return 0; /* Timeout */ +} + + + +/*-----------------------------------------------------------------------*/ +/* Receive a data packet from MMC */ +/*-----------------------------------------------------------------------*/ + +static +int rcvr_datablock ( /* 1:OK, 0:Failed */ + BYTE *buff, /* Data buffer to store received data */ + UINT btr /* Byte count (must be multiple of 4) */ +) +{ + BYTE token; + DWORD timeOutTime; + + /* set timeout for 100 ms from now */ + timeOutTime = TimerGet() + 100; + + do { /* Wait for data packet in timeout of 100ms */ + token = xchg_spi(0xFF); + } while ((token == 0xFF) && (TimerGet() < timeOutTime)); + + if(token != 0xFE) return 0; /* If not valid data token, retutn with error */ + + do { /* Receive the data block into buffer */ + rcvr_spi_m(buff++); + rcvr_spi_m(buff++); + } while (btr -= 2); + xchg_spi(0xFF); /* Discard CRC */ + xchg_spi(0xFF); + + return 1; /* Return with success */ +} + + + +/*-----------------------------------------------------------------------*/ +/* Send a data packet to MMC */ +/*-----------------------------------------------------------------------*/ + +static +int xmit_datablock ( /* 1:OK, 0:Failed */ + const BYTE *buff, /* 512 byte data block to be transmitted */ + BYTE token /* Data token */ +) +{ + BYTE resp; + UINT wc; + + + if (!wait_ready()) return 0; + + xchg_spi(token); /* Xmit a token */ + if (token != 0xFD) { /* Not StopTran token */ + wc = 512; + do { /* Xmit the 512 byte data block to MMC */ + xchg_spi(*buff++); + xchg_spi(*buff++); + } while (wc -= 2); + xchg_spi(0xFF); /* CRC (Dummy) */ + xchg_spi(0xFF); + resp = xchg_spi(0xFF); /* Receive a data response */ + if ((resp & 0x1F) != 0x05) /* If not accepted, return with error */ + return 0; + } + + return 1; +} + + + +/*-----------------------------------------------------------------------*/ +/* Send a command packet to MMC */ +/*-----------------------------------------------------------------------*/ + +static +BYTE send_cmd ( + BYTE cmd, /* Command byte */ + DWORD arg /* Argument */ +) +{ + BYTE n, res; + + + if (cmd & 0x80) { /* ACMD is the command sequense of CMD55-CMD */ + cmd &= 0x7F; + res = send_cmd(CMD55, 0); + if (res > 1) return res; + } + + /* Select the card and wait for ready */ + deselect(); + if (!select()) return 0xFF; + + /* Send command packet */ + xchg_spi(0x40 | cmd); /* Start + Command index */ + xchg_spi((BYTE)(arg >> 24)); /* Argument[31..24] */ + xchg_spi((BYTE)(arg >> 16)); /* Argument[23..16] */ + xchg_spi((BYTE)(arg >> 8)); /* Argument[15..8] */ + xchg_spi((BYTE)arg); /* Argument[7..0] */ + n = 0x01; /* Dummy CRC + Stop */ + if (cmd == CMD0) n = 0x95; /* Valid CRC for CMD0(0) + Stop */ + if (cmd == CMD8) n = 0x87; /* Valid CRC for CMD8(0x1AA) + Stop */ + xchg_spi(n); + + /* Receive command response */ + if (cmd == CMD12) xchg_spi(0xFF); /* Skip a stuff byte on stop to read */ + n = 10; /* Wait for a valid response in timeout of 10 attempts */ + do + res = xchg_spi(0xFF); + while ((res & 0x80) && --n); + + return res; /* Return with the response value */ +} + + + +/*-------------------------------------------------------------------------- + + Public Functions + +---------------------------------------------------------------------------*/ + + +/*-----------------------------------------------------------------------*/ +/* Initialize Disk Drive */ +/*-----------------------------------------------------------------------*/ + +DSTATUS disk_initialize ( + BYTE pdrv /* Physical drive nmuber (0) */ +) +{ + BYTE n, cmd, ty, ocr[4]; + DWORD timeOutTime; + + + if (pdrv) return STA_NOINIT; /* Supports only single drive */ + if (Stat & STA_NODISK) return Stat; /* No card in the socket */ + + power_on(); /* Force socket power on */ + + CS_LOW(); /* CS = L */ + + ty = 0; + if (send_cmd(CMD0, 0) == 1) { /* Enter Idle state */ + timeOutTime = TimerGet() + 1000; /* Initialization timeout of 1000 msec */ + + if (send_cmd(CMD8, 0x1AA) == 1) { /* SDv2? */ + for (n = 0; n < 4; n++) ocr[n] = xchg_spi(0xFF); /* Get trailing return value of R7 resp */ + if (ocr[2] == 0x01 && ocr[3] == 0xAA) { /* The card can work at vdd range of 2.7-3.6V */ + while ((TimerGet() < timeOutTime) && send_cmd(ACMD41, 0x40000000)); /* Wait for leaving idle state (ACMD41 with HCS bit) */ + if ((TimerGet() < timeOutTime) && send_cmd(CMD58, 0) == 0) { /* Check CCS bit in the OCR */ + for (n = 0; n < 4; n++) ocr[n] = xchg_spi(0xFF); + ty = (ocr[0] & 0x40) ? CT_SD2|CT_BLOCK : CT_SD2; /* SDv2 */ + } + } + } else { /* SDv1 or MMCv3 */ + if (send_cmd(ACMD41, 0) <= 1) { + ty = CT_SD1; cmd = ACMD41; /* SDv1 */ + } else { + ty = CT_MMC; cmd = CMD1; /* MMCv3 */ + } + while ((TimerGet() < timeOutTime) && send_cmd(cmd, 0)); /* Wait for leaving idle state */ + if (!(TimerGet() < timeOutTime) || send_cmd(CMD16, 512) != 0) /* Set read/write block length to 512 */ + ty = 0; + } + } + CardType = ty; + deselect(); + + if (ty) { /* Initialization succeded */ + Stat &= ~STA_NOINIT; /* Clear STA_NOINIT */ + FCLK_FAST(); + } else { /* Initialization failed */ + power_off(); + } + + return Stat; +} + + + +/*-----------------------------------------------------------------------*/ +/* Get Disk Status */ +/*-----------------------------------------------------------------------*/ + +DSTATUS disk_status ( + BYTE pdrv /* Physical drive nmuber (0) */ +) +{ + if (pdrv) return STA_NOINIT; /* Supports only single drive */ + return Stat; +} + + + +/*-----------------------------------------------------------------------*/ +/* Read Sector(s) */ +/*-----------------------------------------------------------------------*/ + +DRESULT disk_read ( + BYTE pdrv, /* Physical drive nmuber to identify the drive */ + BYTE *buff, /* Data buffer to store read data */ + DWORD sector, /* Sector address in LBA */ + UINT count /* Number of sectors to read */ +) +{ + if (pdrv || !count) return RES_PARERR; + if (Stat & STA_NOINIT) return RES_NOTRDY; + + if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */ + + if (count == 1) { /* Single block read */ + if ((send_cmd(CMD17, sector) == 0) /* READ_SINGLE_BLOCK */ + && rcvr_datablock(buff, 512)) + count = 0; + } + else { /* Multiple block read */ + if (send_cmd(CMD18, sector) == 0) { /* READ_MULTIPLE_BLOCK */ + do { + if (!rcvr_datablock(buff, 512)) break; + buff += 512; + } while (--count); + send_cmd(CMD12, 0); /* STOP_TRANSMISSION */ + } + } + deselect(); + + return count ? RES_ERROR : RES_OK; +} + + + +/*-----------------------------------------------------------------------*/ +/* Write Sector(s) */ +/*-----------------------------------------------------------------------*/ + +DRESULT disk_write ( + BYTE pdrv, /* Physical drive nmuber to identify the drive */ + const BYTE *buff, /* Data to be written */ + DWORD sector, /* Sector address in LBA */ + UINT count /* Number of sectors to write */ +) +{ + if (pdrv || !count) return RES_PARERR; + if (Stat & STA_NOINIT) return RES_NOTRDY; + if (Stat & STA_PROTECT) return RES_WRPRT; + + if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */ + + if (count == 1) { /* Single block write */ + if ((send_cmd(CMD24, sector) == 0) /* WRITE_BLOCK */ + && xmit_datablock(buff, 0xFE)) + count = 0; + } + else { /* Multiple block write */ + if (CardType & CT_SDC) send_cmd(ACMD23, count); + if (send_cmd(CMD25, sector) == 0) { /* WRITE_MULTIPLE_BLOCK */ + do { + if (!xmit_datablock(buff, 0xFC)) break; + buff += 512; + } while (--count); + if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */ + count = 1; + } + } + deselect(); + + return count ? RES_ERROR : RES_OK; +} + + + +/*-----------------------------------------------------------------------*/ +/* Miscellaneous Functions */ +/*-----------------------------------------------------------------------*/ + +DRESULT disk_ioctl ( + BYTE pdrv, /* Physical drive nmuber (0) */ + BYTE cmd, /* Control code */ + void *buff /* Buffer to send/receive data block */ +) +{ + DRESULT res; + BYTE n, csd[16], *ptr = buff; + DWORD csz; + + + if (pdrv) return RES_PARERR; + if (Stat & STA_NOINIT) return RES_NOTRDY; + + res = RES_ERROR; + switch (cmd) { + case CTRL_SYNC : /* Flush write-back cache, Wait for end of internal process */ + if (select()) res = RES_OK; + break; + + case GET_SECTOR_COUNT : /* Get number of sectors on the disk (WORD) */ + if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { + if ((csd[0] >> 6) == 1) { /* SDv2? */ + csz = csd[9] + ((WORD)csd[8] << 8) + ((DWORD)(csd[7] & 63) << 16) + 1; + *(DWORD*)buff = csz << 10; + } else { /* SDv1 or MMCv3 */ + n = (csd[5] & 15) + ((csd[10] & 128) >> 7) + ((csd[9] & 3) << 1) + 2; + csz = (csd[8] >> 6) + ((WORD)csd[7] << 2) + ((WORD)(csd[6] & 3) << 10) + 1; + *(DWORD*)buff = csz << (n - 9); + } + res = RES_OK; + } + break; + + case GET_BLOCK_SIZE : /* Get erase block size in unit of sectors (DWORD) */ + if (CardType & CT_SD2) { /* SDv2? */ + if (send_cmd(ACMD13, 0) == 0) { /* Read SD status */ + xchg_spi(0xFF); + if (rcvr_datablock(csd, 16)) { /* Read partial block */ + for (n = 64 - 16; n; n--) xchg_spi(0xFF); /* Purge trailing data */ + *(DWORD*)buff = 16UL << (csd[10] >> 4); + res = RES_OK; + } + } + } else { /* SDv1 or MMCv3 */ + if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { /* Read CSD */ + if (CardType & CT_SD1) { /* SDv1 */ + *(DWORD*)buff = (((csd[10] & 63) << 1) + ((WORD)(csd[11] & 128) >> 7) + 1) << ((csd[13] >> 6) - 1); + } else { /* MMCv3 */ + *(DWORD*)buff = ((WORD)((csd[10] & 124) >> 2) + 1) * (((csd[11] & 3) << 3) + ((csd[11] & 224) >> 5) + 1); + } + res = RES_OK; + } + } + break; + + case MMC_GET_TYPE : /* Get card type flags (1 byte) */ + *ptr = CardType; + res = RES_OK; + break; + + case MMC_GET_CSD : /* Receive CSD as a data block (16 bytes) */ + if ((send_cmd(CMD9, 0) == 0) /* READ_CSD */ + && rcvr_datablock(buff, 16)) + res = RES_OK; + break; + + case MMC_GET_CID : /* Receive CID as a data block (16 bytes) */ + if ((send_cmd(CMD10, 0) == 0) /* READ_CID */ + && rcvr_datablock(buff, 16)) + res = RES_OK; + break; + + case MMC_GET_OCR : /* Receive OCR as an R3 resp (4 bytes) */ + if (send_cmd(CMD58, 0) == 0) { /* READ_OCR */ + for (n = 0; n < 4; n++) + *((BYTE*)buff+n) = xchg_spi(0xFF); + res = RES_OK; + } + break; + + case MMC_GET_SDSTAT : /* Receive SD status as a data block (64 bytes) */ + if ((CardType & CT_SD2) && send_cmd(ACMD13, 0) == 0) { /* SD_STATUS */ + xchg_spi(0xFF); + if (rcvr_datablock(buff, 64)) + res = RES_OK; + } + break; + + default: + res = RES_PARERR; + } + + deselect(); + + return res; +} + + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/main.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/main.c new file mode 100644 index 00000000..e469c000 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/main.c @@ -0,0 +1,216 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Boot\main.c +* \brief Bootloader application source file. +* \ingroup Boot_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "boot.h" /* bootloader generic header */ +#include "stm32f10x.h" /* microcontroller registers */ +#if (BOOT_FILE_LOGGING_ENABLE > 0) && (BOOT_COM_UART_ENABLE == 0) +#include "stm32f10x_conf.h" /* STM32 peripheral drivers */ +#endif + + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +static void Init(void); + + +/************************************************************************************//** +** \brief This is the entry point for the bootloader application and is called +** by the reset interrupt vector after the C-startup routines executed. +** \return Program return code. +** +****************************************************************************************/ +int main(void) +{ + /* initialize the microcontroller */ + Init(); + /* initialize the bootloader */ + BootInit(); + + /* start the infinite program loop */ + while (1) + { + /* run the bootloader task */ + BootTask(); + } + + /* program should never get here */ + return 0; +} /*** end of main ***/ + + +/************************************************************************************//** +** \brief Initializes the microcontroller. +** \return none. +** +****************************************************************************************/ +static void Init(void) +{ + volatile blt_int32u StartUpCounter = 0, HSEStatus = 0; + blt_int32u pll_multiplier; +#if (BOOT_FILE_LOGGING_ENABLE > 0) && (BOOT_COM_UART_ENABLE == 0) + GPIO_InitTypeDef GPIO_InitStruct; + USART_InitTypeDef USART_InitStruct; +#endif + + /* reset the RCC clock configuration to the default reset state (for debug purpose) */ + /* set HSION bit */ + RCC->CR |= (blt_int32u)0x00000001; + /* reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ + RCC->CFGR &= (blt_int32u)0xF8FF0000; + /* reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (blt_int32u)0xFEF6FFFF; + /* reset HSEBYP bit */ + RCC->CR &= (blt_int32u)0xFFFBFFFF; + /* reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (blt_int32u)0xFF80FFFF; + /* disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + /* enable HSE */ + RCC->CR |= ((blt_int32u)RCC_CR_HSEON); + /* wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } + while((HSEStatus == 0) && (StartUpCounter != 1500)); + /* check if time out was reached */ + if ((RCC->CR & RCC_CR_HSERDY) == RESET) + { + /* cannot continue when HSE is not ready */ + ASSERT_RT(BLT_FALSE); + } + /* enable flash prefetch buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + /* reset flash wait state configuration to default 0 wait states */ + FLASH->ACR &= (blt_int32u)((blt_int32u)~FLASH_ACR_LATENCY); +#if (BOOT_CPU_SYSTEM_SPEED_KHZ > 48000) + /* configure 2 flash wait states */ + FLASH->ACR |= (blt_int32u)FLASH_ACR_LATENCY_2; +#elif (BOOT_CPU_SYSTEM_SPEED_KHZ > 24000) + /* configure 1 flash wait states */ + FLASH->ACR |= (blt_int32u)FLASH_ACR_LATENCY_1; +#endif + /* HCLK = SYSCLK */ + RCC->CFGR |= (blt_int32u)RCC_CFGR_HPRE_DIV1; + /* PCLK2 = HCLK/2 */ + RCC->CFGR |= (blt_int32u)RCC_CFGR_PPRE2_DIV2; + /* PCLK1 = HCLK/2 */ + RCC->CFGR |= (blt_int32u)RCC_CFGR_PPRE1_DIV2; + /* reset PLL configuration */ + RCC->CFGR &= (blt_int32u)((blt_int32u)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | \ + RCC_CFGR_PLLMULL)); + /* assert that the pll_multiplier is between 2 and 16 */ + ASSERT_CT((BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ) >= 2); + ASSERT_CT((BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ) <= 16); + /* calculate multiplier value */ + pll_multiplier = BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ; + /* convert to register value */ + pll_multiplier = (blt_int32u)((pll_multiplier - 2) << 18); + /* set the PLL multiplier and clock source */ + RCC->CFGR |= (blt_int32u)(RCC_CFGR_PLLSRC_HSE | pll_multiplier); + /* enable PLL */ + RCC->CR |= RCC_CR_PLLON; + /* wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + /* select PLL as system clock source */ + RCC->CFGR &= (blt_int32u)((blt_int32u)~(RCC_CFGR_SW)); + RCC->CFGR |= (blt_int32u)RCC_CFGR_SW_PLL; + /* wait till PLL is used as system clock source */ + while ((RCC->CFGR & (blt_int32u)RCC_CFGR_SWS) != (blt_int32u)0x08) + { + } +#if (BOOT_COM_CAN_ENABLE > 0) + /* enable clocks for CAN transmitter and receiver pins (GPIOB and AFIO) */ + RCC->APB2ENR |= (blt_int32u)(0x00000008 | 0x00000001); + /* configure CAN Rx (GPIOB8) as alternate function input pull-up */ + /* first reset the configuration */ + GPIOB->CRH &= ~(blt_int32u)((blt_int32u)0xf << 0); + /* CNF8[1:0] = %10 and MODE8[1:0] = %00 */ + GPIOB->CRH |= (blt_int32u)((blt_int32u)0x8 << 0); + /* configure CAN Tx (GPIOB9) as alternate function push-pull */ + /* first reset the configuration */ + GPIOB->CRH &= ~(blt_int32u)((blt_int32u)0xf << 4); + /* CNF9[1:0] = %10 and MODE9[1:0] = %11 */ + GPIOB->CRH |= (blt_int32u)((blt_int32u)0xb << 4); + /* remap CAN1 pins to PortB */ + AFIO->MAPR &= ~(blt_int32u)((blt_int32u)0x3 << 13); + AFIO->MAPR |= (blt_int32u)((blt_int32u)0x2 << 13); + /* enable clocks for CAN controller peripheral */ + RCC->APB1ENR |= (blt_int32u)0x02000000; +#endif +#if (BOOT_COM_UART_ENABLE > 0) + /* enable clock for USART2 peripheral */ + RCC->APB1ENR |= (blt_int32u)0x00020000; + /* enable clocks for USART2 transmitter and receiver pins (GPIOA and AFIO) */ + RCC->APB2ENR |= (blt_int32u)(0x00000004 | 0x00000001); + /* configure USART2 Tx (GPIOA2) as alternate function push-pull */ + /* first reset the configuration */ + GPIOA->CRL &= ~(blt_int32u)((blt_int32u)0xf << 8); + /* CNF2[1:0] = %10 and MODE2[1:0] = %11 */ + GPIOA->CRL |= (blt_int32u)((blt_int32u)0xb << 8); + /* configure USART2 Rx (GPIOA3) as alternate function input floating */ + /* first reset the configuration */ + GPIOA->CRL &= ~(blt_int32u)((blt_int32u)0xf << 12); + /* CNF2[1:0] = %01 and MODE2[1:0] = %00 */ + GPIOA->CRL |= (blt_int32u)((blt_int32u)0x4 << 12); +#elif (BOOT_FILE_LOGGING_ENABLE > 0) + /* enable UART peripheral clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); + /* enable GPIO peripheral clock for transmitter and receiver pins */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE); + /* configure USART Tx as alternate function push-pull */ + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOA, &GPIO_InitStruct); + /* Configure USART Rx as alternate function input floating */ + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_InitStruct.GPIO_Pin = GPIO_Pin_3; + GPIO_Init(GPIOA, &GPIO_InitStruct); + /* configure UART communcation parameters */ + USART_InitStruct.USART_BaudRate = BOOT_COM_UART_BAUDRATE; + USART_InitStruct.USART_WordLength = USART_WordLength_8b; + USART_InitStruct.USART_StopBits = USART_StopBits_1; + USART_InitStruct.USART_Parity = USART_Parity_No; + USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_Init(USART2, &USART_InitStruct); + /* enable UART */ + USART_Cmd(USART2, ENABLE); +#endif +} /*** end of Init ***/ + + +/*********************************** end of main.c *************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/openblt_olimex_stm32p103.elf.launch b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/openblt_olimex_stm32p103.elf.launch new file mode 100644 index 00000000..18521905 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/openblt_olimex_stm32p103.elf.launch @@ -0,0 +1,40 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/startup_stm32f10x_md.s b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/startup_stm32f10x_md.s new file mode 100644 index 00000000..e36f2e41 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/startup_stm32f10x_md.s @@ -0,0 +1,370 @@ +/** + ****************************************************************************** + * @file startup_stm32f10x_md.s + * @author MCD Application Team + * @version V3.6.1 + * @date 09-March-2012 + * @brief STM32F10x Medium Density Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Atollic update: set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_2_IRQHandler + .word USB_HP_CAN1_TX_IRQHandler + .word USB_LP_CAN1_RX0_IRQHandler + .word CAN1_RX1_IRQHandler + .word CAN1_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_IRQHandler + .word TIM1_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTCAlarm_IRQHandler + .word USBWakeUp_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32F10x Medium Density devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_IRQHandler + .thumb_set TAMPER_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_2_IRQHandler + .thumb_set ADC1_2_IRQHandler,Default_Handler + + .weak USB_HP_CAN1_TX_IRQHandler + .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler + + .weak USB_LP_CAN1_RX0_IRQHandler + .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTCAlarm_IRQHandler + .thumb_set RTCAlarm_IRQHandler,Default_Handler + + .weak USBWakeUp_IRQHandler + .thumb_set USBWakeUp_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/stm32_flash.ld b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/stm32_flash.ld new file mode 100644 index 00000000..c7e2f839 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/stm32_flash.ld @@ -0,0 +1,178 @@ +/* +****************************************************************************** +File: stm32_flash.ld +Info: Generated by Atollic TrueSTUDIO(R) 9.0.1 2018-06-06 + +Abstract: Linker script for STM32F103RB device + Set heap size, stack size, stack location, memory areas and + sections according to application requirements. + +The MIT License (MIT) +Copyright (c) 2018 STMicroelectronics + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20005000; /* end of 20K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x800; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 24K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.cproject b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.cproject new file mode 100644 index 00000000..e2d29196 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.cproject @@ -0,0 +1,133 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.project b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.project new file mode 100644 index 00000000..c11c5b56 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.project @@ -0,0 +1,26 @@ + + + Prog + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs new file mode 100644 index 00000000..9f4e4c5b --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs @@ -0,0 +1,11 @@ +BOARD=None +CODE_LOCATION=FLASH +ENDIAN=Little-endian +MCU=STM32F103RB +MCU_VENDOR=STMicroelectronics +MODEL=Pro +PROBE=ST-LINK +PROJECT_FORMAT_VERSION=2 +TARGET=STM32 +VERSION=9.0.1 +eclipse.preferences.version=1 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/language.settings.xml b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/language.settings.xml new file mode 100644 index 00000000..18a6b10c --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/language.settings.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs new file mode 100644 index 00000000..f6753e14 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs @@ -0,0 +1,164 @@ +eclipse.preferences.version=1 +org.eclipse.cdt.core.formatter.alignment_for_arguments_in_method_invocation=16 +org.eclipse.cdt.core.formatter.alignment_for_assignment=16 +org.eclipse.cdt.core.formatter.alignment_for_base_clause_in_type_declaration=80 +org.eclipse.cdt.core.formatter.alignment_for_binary_expression=16 +org.eclipse.cdt.core.formatter.alignment_for_compact_if=16 +org.eclipse.cdt.core.formatter.alignment_for_conditional_expression=34 +org.eclipse.cdt.core.formatter.alignment_for_conditional_expression_chain=18 +org.eclipse.cdt.core.formatter.alignment_for_constructor_initializer_list=0 +org.eclipse.cdt.core.formatter.alignment_for_declarator_list=16 +org.eclipse.cdt.core.formatter.alignment_for_enumerator_list=48 +org.eclipse.cdt.core.formatter.alignment_for_expression_list=0 +org.eclipse.cdt.core.formatter.alignment_for_expressions_in_array_initializer=16 +org.eclipse.cdt.core.formatter.alignment_for_member_access=0 +org.eclipse.cdt.core.formatter.alignment_for_overloaded_left_shift_chain=16 +org.eclipse.cdt.core.formatter.alignment_for_parameters_in_method_declaration=16 +org.eclipse.cdt.core.formatter.alignment_for_throws_clause_in_method_declaration=16 +org.eclipse.cdt.core.formatter.brace_position_for_array_initializer=next_line +org.eclipse.cdt.core.formatter.brace_position_for_block=next_line +org.eclipse.cdt.core.formatter.brace_position_for_block_in_case=next_line +org.eclipse.cdt.core.formatter.brace_position_for_method_declaration=next_line +org.eclipse.cdt.core.formatter.brace_position_for_namespace_declaration=next_line +org.eclipse.cdt.core.formatter.brace_position_for_switch=next_line +org.eclipse.cdt.core.formatter.brace_position_for_type_declaration=next_line +org.eclipse.cdt.core.formatter.comment.line_up_line_comment_in_blocks_on_first_column=false +org.eclipse.cdt.core.formatter.comment.min_distance_between_code_and_line_comment=1 +org.eclipse.cdt.core.formatter.comment.never_indent_line_comments_on_first_column=true +org.eclipse.cdt.core.formatter.comment.preserve_white_space_between_code_and_line_comments=true +org.eclipse.cdt.core.formatter.compact_else_if=true +org.eclipse.cdt.core.formatter.continuation_indentation=2 +org.eclipse.cdt.core.formatter.continuation_indentation_for_array_initializer=2 +org.eclipse.cdt.core.formatter.format_guardian_clause_on_one_line=false +org.eclipse.cdt.core.formatter.indent_access_specifier_compare_to_type_header=false +org.eclipse.cdt.core.formatter.indent_access_specifier_extra_spaces=0 +org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_access_specifier=true +org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_namespace_header=false +org.eclipse.cdt.core.formatter.indent_breaks_compare_to_cases=true +org.eclipse.cdt.core.formatter.indent_declaration_compare_to_template_header=false +org.eclipse.cdt.core.formatter.indent_empty_lines=false +org.eclipse.cdt.core.formatter.indent_statements_compare_to_block=true +org.eclipse.cdt.core.formatter.indent_statements_compare_to_body=true +org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_cases=true +org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_switch=false +org.eclipse.cdt.core.formatter.indentation.size=2 +org.eclipse.cdt.core.formatter.insert_new_line_after_opening_brace_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_after_template_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_at_end_of_file_if_missing=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_catch_in_try_statement=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_closing_brace_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_colon_in_constructor_initializer_list=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_else_in_if_statement=insert +org.eclipse.cdt.core.formatter.insert_new_line_before_identifier_in_function_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_before_while_in_do_statement=do not insert +org.eclipse.cdt.core.formatter.insert_new_line_in_empty_block=insert +org.eclipse.cdt.core.formatter.insert_space_after_assignment_operator=insert +org.eclipse.cdt.core.formatter.insert_space_after_binary_operator=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_arguments=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_parameters=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_brace_in_block=insert +org.eclipse.cdt.core.formatter.insert_space_after_closing_paren_in_cast=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_base_clause=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_case=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_after_colon_in_labeled_statement=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_base_types=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_declarator_list=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_enum_declarations=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_expression_list=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_parameters=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_throws=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_invocation_arguments=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_arguments=insert +org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_parameters=insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_brace_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_bracket=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_cast=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_catch=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_exception_specification=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_for=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_if=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_parenthesized_expression=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_switch=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_while=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_postfix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_prefix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_after_question_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_after_semicolon_in_for=insert +org.eclipse.cdt.core.formatter.insert_space_after_unary_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_assignment_operator=insert +org.eclipse.cdt.core.formatter.insert_space_before_binary_operator=insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_brace_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_bracket=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_cast=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_catch=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_exception_specification=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_for=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_if=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_parenthesized_expression=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_switch=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_while=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_base_clause=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_case=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_default=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_colon_in_labeled_statement=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_base_types=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_declarator_list=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_enum_declarations=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_expression_list=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_throws=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_invocation_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_arguments=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_parameters=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_array_initializer=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_block=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_method_declaration=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_namespace_declaration=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_switch=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_type_declaration=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_bracket=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_catch=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_exception_specification=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_for=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_if=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_parenthesized_expression=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_switch=insert +org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_while=insert +org.eclipse.cdt.core.formatter.insert_space_before_postfix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_prefix_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_question_in_conditional=insert +org.eclipse.cdt.core.formatter.insert_space_before_semicolon=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_semicolon_in_for=do not insert +org.eclipse.cdt.core.formatter.insert_space_before_unary_operator=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_braces_in_array_initializer=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_brackets=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_exception_specification=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_declaration=do not insert +org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_invocation=do not insert +org.eclipse.cdt.core.formatter.join_wrapped_lines=true +org.eclipse.cdt.core.formatter.keep_else_statement_on_same_line=false +org.eclipse.cdt.core.formatter.keep_empty_array_initializer_on_one_line=false +org.eclipse.cdt.core.formatter.keep_imple_if_on_one_line=false +org.eclipse.cdt.core.formatter.keep_then_statement_on_same_line=false +org.eclipse.cdt.core.formatter.lineSplit=89 +org.eclipse.cdt.core.formatter.number_of_empty_lines_to_preserve=1 +org.eclipse.cdt.core.formatter.put_empty_statement_on_new_line=true +org.eclipse.cdt.core.formatter.tabulation.char=space +org.eclipse.cdt.core.formatter.tabulation.size=2 +org.eclipse.cdt.core.formatter.use_tabs_only_for_leading_indentations=false diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs new file mode 100644 index 00000000..77578cd1 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs @@ -0,0 +1,11 @@ +eclipse.preferences.version=1 +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1641191629/CPATH/delimiter=\: +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1641191629/CPATH/operation=remove +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1641191629/C_INCLUDE_PATH/delimiter=\: +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1641191629/C_INCLUDE_PATH/operation=remove +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1641191629/append=true +environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1641191629/appendContributed=true +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1641191629/LIBRARY_PATH/delimiter=\: +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1641191629/LIBRARY_PATH/operation=remove +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1641191629/append=true +environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1641191629/appendContributed=true diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs new file mode 100644 index 00000000..e1896bba --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs @@ -0,0 +1,3 @@ +eclipse.preferences.version=1 +formatter_profile=_Feaser +formatter_settings_version=1 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.elf b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.elf new file mode 100755 index 0000000000000000000000000000000000000000..e4745400ab98a3b6de0ec8875b03aa70e5994bc2 GIT binary patch literal 127532 zcmeEv34B$>+5Vh!ZtlHFZjzgoBy2Yeih|hym&%fzgd`A>pa^ORB#>xGVirMaD+*e* zwv}o(MbXxNrPc*eT5YkewTrDEsBN{j741T+{raI|rC{a%JTqs`JvV?$?eg{iI~V58 zyz9L4&dfV==A3(SNljy|VHiSxOfgvy>RBy<(~>CdBF34=K;?Ho(DV+cpmUP z;CaCFfad|v1D*#w4|pE%Jm7i2^ML08&jX$ZJP&vt@I2so!1I9T0nY=T2RsjW9`HQi zdBF34=K;?Ho(DV+cpmUP;CaCFfad|v1D*#w4|pE%Jm7i2^ML08&jX$ZJP&vt@I2so z!1I9T0nY=T2RsjW9`HQidBF34=K;?Ho(DV+cpmUP;CaCFfad|v1D*#w4|pE%Jm7i2 z^ML08&jX$ZJP&vt@I2so!1I9T0nY>fNgikx5x(pHfup3+&Coo=vuxnq{Tlb5kdJPU z8*V=kd@c3Qw=W9sh-)lZJM95qL;5|wy1U;H>y3hff$)R)8wL^bFGib#JFJGW_gM9o zqz4})J{xq>_U#ab#vWt(Z?~sTjXamylzAXyAnw)bxX&Fh_5@x{j*B}a;_Ci#OXKE4 zZ~i6jP}UQo=nuP5e)G=lN$ZVScW&SD=KB5@pB^)?;egmkOrW)WXC7A8F>r# zixRQ#-nWgsxQN(y>)Y7{pE@w6#5d{A0~yU0%2_2Djd5R()QWvu4}sDgEC8iMVYVDv zu)m|qxK02UEV=VQ0#XPmToM8%x#YGttE-bgx zTM1eawJ(2r!T$9_cOED#sYA`jmrQSrmo=Y{dW6K&y5mb|*Ks9^cFrNT;gzu1_YIcz zi2<>%@$KW9CPVLc|LWf=_WkOh@r|U{;>@Ji{KkU)2L}$nb;e;)_^AUE%0G2rB2ok? z4=Eq104Wz~Z23(G;!2FuKXqVS$xR1*vNXQr!2^D@F1y74b!z{{Uq5vq4ZP{)2JFcI zC0Gt0Acc^Uk;0&6mYA?%{J})F`XLcA%0;Ir5AX2RM)Lf1V&9c-8(0aCp$jl(OOS?<29X5Dn8-^*%Pu|`eju>z zoCCf?#_b|637EWtH(|6)d!YRFRV$1eZm3M&B?`nIq$#iLy6Hel$>Ax#-+dFtl9=)` zw151tQSjPc`i_3N9Ddmizm)9QfH4%t*r~=CS-`tq&Oa31}hoEsSTM9P~GgTZTT# zkF&8pUx>(XX`tOW z_5tI@d*8gJ|Fzu(pr!8@bNsuE0s)FK#kb4cHZT|MzwWKQ;~H|iEBA%X+-14l`TH!H zSMD>Bf91{ftxLL>EK{j+|N7-D=kLEbjd|t%KOm><`oY{~39MtExa8ojKm&N7NAf_= zl4VxI(r#;C$O=yR>+VPQim+KOBBu21jqq!5N3yiQK#ga0hvp@eQ)~Xdjf467*Oy7F z_OH*+l{LQuZ435KG;dgT_^lTqD|Ly(2ZB374PUHG*u`17ewo#us{ zvY~{Fs$Max=JC5V;Y#Bp=~a()ur6iSggvy8^**|nCD!@4EU~^PWQleCK$cj~k7S8; z{CKa^rd_dZGIkpgj02s-zy6XrJ$*o=RqQj2N0C2$U|i+%RiW}nk((dg z{=hU)LzRR>l^fSRab?YwHLv(<>ZVs7nBIK(x+|{qU0MB#zq)RQ`Rez~wq@o=jT0yC zdUTyQar*8_jn5wNMtAE zIWRX%);X?9)#*Q?&c|cw{QlkqSyOHmYx?2dK>h9m8Tq+YkKp?!doAc1mzD@!G~#|AeHJT_nzSQnTDRTmfq*7||D;roo&##&>I#}-@rd{+9P zm~#4VjaizMzD$)L&nDfpS_fBP%%@n_As?IY%&>UXNPp(Q{T0s+^1Co0V@T$qHkBt| zk9=pvv+^6%VM2wWHs+;cldl`@xX0?L+K0aG2*Ve;-WP(c7!QwOJVdO=mc6z&=N{vP zI7Ik?xes@XeU?Dq_NaW{eNV21J!WQY`o3_AvFlT7GpiEU{^lNkHzLWN$_`^%U`obw zM*a=up)1Q?@%jF;d$UM6{%hsOy%O-p9rW!#uIk5YCr^E4SKZV@5I2*wouyxNo4dciA8JRwor2CR(9o_v|(1J=5{~y+R;1 z-*k` zUq1Wk?F9$T*DsUsqY{3m{4oh#S~jNsYS8aJ^!gjB$5Nr|IjnH4-7V0!p~{?=wtxMc z_+1I}TDsE^o8xyS&NB~LZ&=H|w>RD{J&bXxaNpq=W!y|#CwyE3nBr%N6CQ}0cU@1x zD?(fg@0loPSFuE1(w>pDU6S?;Xe?=3x}=3AEgdwLNaJ43SDRF8U47&BA6;3nzq~cQ z%DQaBRX1+G>dMJiop+T{l~7f%e_Lw-B6@n&S1$bu_-?-nd_#aPGq!TiGofK~W#KOC z#xGxmwk^opZN0j|VmhJwDsk_j*Ipab@RdVG!Q%Khqq9I9N>5jOS-Zy?Wz)j*zI@0k zcE!phGC@MFTT_l$kqaI$ZYY2Km#sHc?%Q2xugPNfJA3or#|m7zU$m%I_uW?E zWM>r)9kB`rT&wWmx4w7?`EfzpUuj}psG&0ZhRVM@gHelpROJER>G2IWRQ~mu!*7jwTkJdiz~Q%E zIE?Xx>ofihHI7$agD~;$reQ}Z4D1uZ@z8p}!5x8yz`P~P_T>fUU3Q=#EFxcA7QmW+ z_^m&2m47I_N9>uCV+ig;A=j4;|PU+<9~Dz+87Z&h(ppD_{k! zcq`tQ;7jy{e4)6cxa7E$xD z`i4c^#}&gGWY$#Tv-usjiSTl$^A*+*zLl^EmA;a53EzV+|4w{C`OjcSVA#Cz+ps-& z8*w*1f^QKFfMDKCE?@9v$eLSN4hF{)e+$c@_|~cxVcyDeIKGPIFSDEx-&)r!%&+_i zDzk%2+1}fTFAR=>r_8UiJUMt19A^F(%Tt2|)cG}*OM>%Q-pcay;A_xeex2o0gNInY zo#mPF&9$iO8@~mnJieOcJ01bPF214~F22ldKY`9r z2b=$t|8kU*z8VLH8T5X#!O`Fkm}h}AWkV8xaBEGQFf=9J93rI)1d(zoYBNM?1mga9 zDUufU-()@rj`X(r7UADw(k~*T02u!*67XeAgOvYP2?R41Q1;6b2#M4=Bz?ua1nkiC zb(4La-a<{^ur)1%I{zKErYfqv)7JC_j4S_LTGPFd^xtj%keY)29p)+2RNGQ2{NGZV z0F(*;{YsNaJ)hDKnCW24+-CY8GB3iANN>W}@jqeo;WlvH5jCyNoflP0;ZZsY94qpJK&NNyukr{SP_++hnH(&8+WJ=PpSL znOSd1E@V>X7#bYpPN4f zRBnm{)uW6hAddI8njWCEZuUc}H0jLxHKS{usUXLl~{~rki(-#oTfc)1sPJiD23nuaE_~K^2N;FwwV(QKMcGVe4L_3vUxw_Z zpG$&Y)$p981T$o>JTEB;uouJe7m^ankbUxkq$Gn9150E_A1t&BrJmhpS&L`5=gBBpFR8n z8G$>$N_*O9!`=6QDuU<2kAdwh`{L`XYeZlNrGoJ-n9G3&SdNdcZmbf42U$)Cu1^R5 z!>3Yfd~H*`2s}o7y08+F1)gAa*)re;PycU}Q>FuLr1ZfYGi3?twS;v(vf!L;QO>$C zXh6yq@Q9QjqZPiC%ke!qC1Ak*ln^Y;NSO_xaLS*6AD8k|G%;IP%ODkO{sr^|e8Hs) z2z>ld{0TG#SFjq?pThdP@&N?G@nzqjTp{T3)9;aTS3n~EH0tmL z6QM7DCd>ZdOZbkT!*VeAHp{gvCj@_Ppj^*#NLXKlvGI*dpfe{27}GfL0`3D`5%E4(?3)-HriV*G$jS#bnq9Vl6l`M9F^g0IXfwAF0{ zDIcUSDw0)Rqbb*bQUuB!wz?5G`Ln=%1h|K7+@@t>{B6L|M|*7z3HuFc(R}IKrU^!? zxv5c%e+6u{5H-Mx{xL_C-OEHIYlR55fI{phI4$pw?Efj!Va**PxL9_>8p!46u+yhV z&vJ+rNKa2ONHZ1|NJmdKK1QgeK>FE+S_@ZTmunPBofkk-O!BdNCi$r5xG%HMUu3Zm zwiF^aHvbY@j^E3Eevt}q1af={sOQ4c9{{1oShXBuW-uZmvq3yhH3NeW1WfYD92hqY zfU;RCy&xpS37gr7%`C=QB|=0_$iy5oZesOu7Pjb-6S$EyZdM3b8#&=-+Oefaats48 z{^L-&0ai3Z3oVg~#Kh}?z7RG{yw9dj+^I1KQII1%fqE~6oScQ_V)Do7?vbtV^mI7!mow$>T&M0{W*wccd_D#EIo>%%V0lcARX? zMo3S27GDl(@zh@dTn-Kh3v(v~PCP`Znq>$AFc2=d0~`}q0^}%|cpeIA2p!_Y3G~DC zI>;(MDxNqWApJS91qFsGaZ(4oXMW3X6@3;1zmr z5_XuyZ-JR9*lrX*f`G#m>@|wV!tYE8-!zM%U48rf|C{6~$F2hn1t#7V_ZLX0WC&nP|_D5m&9Lqve{iAP|xeP#MH z=;W0tXAVE-z&`uR^eC63=4rI;D3_z=0$w}5>*eT>VpxMrUVd7IA7PPKo>oaKit@_T zzUcJx%E3&bT%52XzxZjISI(!C;?xh zy&EMEOtg2S1VSNuH%cI!XzxY|WQ6S9D1mH|WbZ~CQN7Ey7RQ zVIpee5rB0u5a~OKs3qe2NEvrQ{tuAMd>Vx}P~e2flB;sqD9$9;~)I_$P3&BY_`%o=YV5O16DbEz>GII1Zjo)GB=xG{gH-t~lkx7^c_8j>(1UN^! zp_re~V{W@oZ_Hzz-k8Tay)i%d>5U~%Z~UAEaU6~I9O8Vm=a6%HqYrNEIdnN#g3;53 zc)4KWbm6bSC&<%#p;*+u*PO3op8d=Ur{saX+C4uau1(l$DS_0#e*OBrW2}E$1LFkJXjS5ZnPxpn; z(^BclzMa5{y{|g{qj{XES`V;4;qN@YuPeDlhFRcA`*_Mbm^U(B|H7C(Nb7KS#@yzXf z6q4*SH(siXWc$pGfG^oTb0ZK;w$I!MghZl!=5~_O^mTIwHQ8rwO4Bkh;>=BHvd`R< zCi~3I)?}Z#t)V8Kx&4ls>@zp12|yXo+@vOvXrH+~0=5)+=5{>BcanYPrUdLWHz|;0 zpSckTCfjFj1VYL7nHzy{l6~ezAS1~>b0d(QWS_Ya7?*6Hxv|bj_&N+boVlF>V7(Ex z&)nt$+Gd39Gq*DV?J`pBGdJqMx@Vuc5%QT~`^-&twi&k1+(-+VVf)ODw6Gbr&)i7M zFvIql8)?~Q*gkV3ZJZgl&)ingOfzhsxvc?&Gq*HK(B|}Sp>U>1<0zoj5(b@pNxLO% zD1K^^aH4{#OTqz>#vc2GhLc2M8`R>=jmO;?I5>)6VaikoM_dO)rt9D+({*r^c{_;q z!BHmLVILf2s)HkrW`CwSIAS@FsSb`<4rZ!@BbMVc)xiBbLp~jjVr|WnZQ`IAYnKsSb`<4raOzjxt>bN13jJqfB*h#QL3sqbaC2 zBO|bhm-CtOpy)dGh{%)&MW1Kcmn9F1z9hGhS@NLhCYIx~PCf%3mFDl>}-0JG|jHPWN#4j=uuM*0&y+C}Ih3GIN9V*F|%(tTXR_!&epHvbN4RL7)CHLrp- zTPjMIqW=SW?lekfO36X)E5=?z#H;8t%p$2~GSJGJS1mO-RPVlOeGPQpn9C{PxOmm# zG&EYo_~+T6CoE1Ge$;kl1u|vL6H?930q35c1I`~v&I4o{{~~MO?ufE+#^#$H(d|-{ zmk3JqKFP_QpcsFEwcg-}Qk}8+c}MgHDaw<>+^6&=H*~MGHYv1`kTn ztrSh7=&)@0%Y?(&6B#2?5|=x$;ufk}?5N_vG&Z+8suoLCMPSYCqPF`j1<#$J>C5$+MeT&dWA zlxp5ylim6qu;z@RV#Nu?U!&qbO1WeZ#Mmo{*u@wkvZNC3hSk{EC6!>LN)@}Lkg-sV zv#q8}?_lu3qBaXleF&u&V7oCrmW?sKxF@jb>CrdER5&b*w`A<)*FrJ zpa_eb4^s0S3a>X<#!2irA2%6edER6c8qKTpvH1*Gm2&|#78)!Y&AA7e9cR#cv#Eca zkNbc;9$OhVu-5XG*e5bjZ2k;b^X0;E0~_59_5xY&4YJyWg-NV^GljkbTH$!kwVSB< z_tZQINf_&b(5J#Cj~A7`b<{U51?xgCsKoySbxkyyt@7GJd$}pJDSKlnC1OH}O)(%R zWom4h$VY673tNJt<@xXcQxHS}(4qLp8N|l$4fzx?XnJ^tZ zMuI%)ONcq?`%RRyZXP-1Nne6I=}X`R_2dM3(w87l`V!ePWmoG zo~};%xIGr>>ZFfGnCa@IkJUIQeTx9tmahIUloKvN^F_i*_{LqkC(xWg|EGY@xDiF; zLX`BD@@FV#et~=!$|#5ckii3gg9m(g&<4ra%m;h2_E5A##;}!fODJk*5zU zq>?WJ78yM4HYS<7unG-JH9R}dJcr6B*>z>f$TvxjuO}QO$4e^C6Gis5tVF?!3BN^Y z1#ckS9;H73SY*_bf!(1S_$^i{tND$=Vax{ph)hpOrg21Ve%oo_Q*z*+hnDo zp{jY8jCBp5ii}mPdYe?jnvKnK(B90SDlE%Jb0)hGJnTbbq4LmnsbW1<8Lut z>nJLfijGfXoiEY6oKbZKV5O=vN3zy|Rn?gjQ|DMIcNrCBbW>4+YbZ>Gl1zEWEx}+J zgD%I%Nj>&0j5OoU6XC?0WfOU~YMk`OovN$HNwGVn)WY$(Y>m9kyc0EzU*~{7CwLs| zmDCk@&SAnp|BwxS3E+4+SGI8p%|s|2|4lMWa1KB*wt*hsf|9-Ue+QOKBzO_V2JhHL za6`N_BCpr-G~U6LK*M*bv6rMDBN>}1m@nJX%eGvCY8-{Url;_9rO?5*xbY=X{_|}7 zsiXKWbK_n7yo{p$@=^TT-FO#2AE^XCZuE{4_-zcqCGj^+7+pmcnk`jHf=i-U6V{Ka zqb`Qvl31}*@6zyUGamXLjDn+k%>6*3o+>nXEYUZmcLeh-wg>`OfX@gY#gaxnE}@=Rknlsb`R`RGts zSc3#+?1#RzTS0Au!t_T_z#WZhl;eoVmk4VsEK5bFve^}@YSpFL!f1SlWbe%9bW{-F`p#Uy0|!)!4HEIE=<6fEg9EI#s!&J zFJ-X5SaMzk7+1e&fU#8SXa5Yl zf^nIQDKf;?u9hq32DI1)bgAZ!(}h*oC&e4vuOQuCdH`x zb%Iz#@KFPXC$ehd?UZ}{ebA*mu+x+tz$kl?R$uQjXe))5(xB_5<`Z%3qzwAJgd2Da zmH8|UTIUkuofRdvPO^@cbHx@a0C? zKFOql*iXoG8Vy}1@5&m@+4o1GGn|?(mee(}rmxVH<*u4ucWPSh)MQZ0d{<2;UK?O*29{t)2LK-x9KQh33G#k)nZfyGZW_*!r;O7i<4e>e?@v!R z{t9vk!$j`hcqw}YWFy=~m5MxSB+iCK=3_L6r$0CcK{7V;nUbt9+m~#+L*&n+Nzap~ zT=Iwu-aHRBP z;XfcRAe=`q4uKH+2!_3%c?kr)pJCbA&+rcMQTH?HASCe#`L|F=R!_)(4U!^7-edi# zkJg&W)!4%POx_OgrPxo%li*L5=Pu7lN-)KKLY|Za?0V!A@>CW|v7eA9B^ealN&cmj z38%>Wr@xZbq=6!zkf%&WioARJqNHS{{23@bAx}zniv5HSkFrSiGy;7peN zsW0I>IEUq6>f8LTWjP`B=aj8y*?w+1*w{+l!C(s?WlC+uFbysuU8J6bl{vVWWi#~v z#(Qun%f8gDxGW2v%d%fs?F2gRhHTnXC>nmbEMhufrqp4qr~e8;1Xz}h=8Ve~4}~X= zLqv*0eMV6FwVd#&sMChq0gEg-7RD5iZKuW4Cw>}{jLkoU$_%M~r$zNQLO@lp)7lJ< zKU1Ns;JX&RHF>!1a&CSH3uS5=-s=JkG2Tg6-0gAlf65)+iCGtXy$P1204PDEJ zJ#{S~bwnPC5qZQB`7K4Zx~pqA#(0jD&&iee zd(vk&vz|*`LfO~|D4|QW(C?}EQYrL%DRd8oE|5YYS<@^>=mJ|vjNyq94kI?$Kc^dArTS>2RPlQVsgSf$DyfNRB^zxeDga$! zFhH#YHPcTADEL~!G9oJYZot`ttn(9+AG@_QJ{4`W8{;rcRDiebC|CWlAi? zJ~j(OrpBf?zgv(pq_oFUTrwAF%53}hF^tJ zZE%lOuCOK8HuExAfPuzxcS9^1OCdLIf$NS($etwLe ze6P*%dp*JLI~R&#e^nl*epT*UONuYB2ATX-xq2?y^%%eJ^NNE98u~H*OMtQ;!X(vs z2=mtfVjsffBgjk8nvnen@~z+yN%kYi1bj*MBgh1TA@v9{%b}2Z1exV=kYb=&C zlI%y231o-tN014OOR^t9CJ+(H_9MtNDv@V?uNly)&iu$BlI$}-0=|%a=0_lyWS{vF z2qoEPegwiv_L(1nj3oQak3e>kedb4CT#|j}M<5ci&-@4!ie&rDZ>52~{9SOWQQwS! zMwqnaD9GLFN)*0L=?p&8&lJedXo4c9V15RFQ^ORWpTQp= zFa-)S_=_B-_yTbYWKHoT_I5twxBUZz+eZ zr4SggR)gb0s}JRmTCc-D7h7+F`f=-{C|}}x3{>Ik0mkq>42ea&KX_7n$tZ_?x1gNr zdmZI8-zUJC?)w$AW%z!Fa;EQdC};WBp*+U-b9`s}J`MgHUlqP{eQCgq^#$=g&i5)X z<9+Wy&jjD^@IBG@YhWV2E1@CJHxWGfJ|FM}zK2jQ^le3XlJ7F`9OuhJ`FP(?@IBf0 zLr_ofeHZu>MVxvOhJPw>)^i4&Dgr0cDO0Y1TjSJAG2+xqG2+ylFc6F$CmY6)@GZEL zZ0b!Iaq3MNaY6YejG&5H@w}rChBXwKim$lrj{+0_Q+x$@{T^5HWx{;$HenyW5`D?$ zMs9*bWw6$~;(iYG5U-=nPdtutB-8_2%`1stAKF5mtBAiP={fkpyjt=bNxX_SKPd%_ zq;g7JBPEO^UPYUqk|IXZg_QZUlrfWd6>WazSyo~u*W*PQ*X~DISV_EyHaGnhz&S9Ul>wv17Ue`NWBe&<*6a{HV~FeLi4D9E6dYE z4A$n?Sw1zS-Uh<*%yjiOkg3pLp03^oLYwQ-)!RT=ZVY{#dhV(PPjl$oY}eh(P+q3I zL(`;p5=A^)oo zyMW6)iQU_8umK|TMobcOKmxw3Gb$Q|d4U9infH-x(4ajb;lGi6G-M1w!I%y@@+toh zLCNMXfBZ8z4swd2$~Zwz7i&F6SnePZD+GR^tqvW=@@G@VndI1y5FbMQ#^!OqL_J2s zP6sgs8pr<_qt<93Cw8E@TT!_&2kiDOk8xZGjM5)Kh7-=%d@E!o@asoFfhLUUn*dGR zj;}ohu!Ro}?g9-<1>O$hpZF}`10YQN0Sci)U`5_y9fP?;sH zQsniAJo^ULrEMZQzk=T93;ai1X)P6t%M59PTLsCn{L+* z3Tw}>ZL`5lu*PY%SuPs8RsueTm2CjM8_!tpIG4m>gw{srH0uN3qo>78!GLRM(Gc z_muHy3q=9Xwg>o;s<=bZA=CN_sxs z1){$)qQfUs4<8P{EY}blqX`(=qg|R4gFp{`NFUolVzjG+QLB}!<6~W&pk1A)=XuEO z^Q2gxC&&6c#qIO(bTOCVBazNZ)e$I7MKJFhpVc&cBV074n8Y}#< zrtRN5g!H%w>v56l)F5M~Ug0Ic72dVoz|=iPhvM#n8ZpYbSuPL*VGP>rnx>q!as^i_ zV2&OP(fNw;GO9D9V`+5%jI-;q`*nP5zfQ2Lwg&+he`i+^agC`wO~B^Qr4Ys!{Db@d z9~ZFQLmiwg$vox|aQ8VFV}kam&Kw;@ zV#h-+9j*pQOxPZ4ccs16a>WoAzpEx(54aS=r1#bNPUY@#_Agj7-q)np3kVMF^$fxe z=pWSe$L!g3*KCFxGh86%hkM-yn5Ad)yAFWZj>&PVb~~NH7e6Z1!;?{(L%ybdDTonq^nI&OUb)H3Nx6Vn za+}F}39C>&f-O-RIaZCAVTkGXAy*bItbce z%8?77TmiXPatB0xQEMyJyC!+Tt9MOyAl17j8{{fyca|CpdYywRh0yy`Ah-pI20Hh! z=e|h?G~itwgKJ!OmpMCHcG!5=M1krF?u$aw@k5GIdA%8NQP6hxy60LB3*0-vi1c=0 zblT%OH%jM~qzL2HBe_VXDA^K0UT&9}*C83AbuqGKHX0K0(~K8+-Hc?2W@fh_`NSJW z^A?uAtO(4uIs`4*0?ZjmtdRL)Btx_R?tai*3y6kW_V=m#-jt zN}Aiu>}Rsr_8hX`DlD@D3ae#wPD^wd%{^+d<)~PPS5w`p+~t5667wqxbKkR`51?^S zl+Sc&42V$(Z4=z5i?KdCCPA~iTi{}Lqcy9G{5~u3B;dP$ny;e$vQQUU*Fx6-^a#@Z z{~(uWFS{p)YlwSj+d=;jpB&xUPV9_zwu9DEE))J~^Y8y=9Z?Vb8z;XuBDR;DHOh_F ztcLiY_C_Tg#j$;@8Qj&yivbb;r^5KRCplqKvmLWPHG^AE9Q4$ENF9FY2o6Ly47#3U z8gfj6mc+fq!-t)Qxi&hQ!QBLxHaA+cy2!C^Jtjd*y0y8OHQ9xFpNjvj658zdXw_)f zJG;rz1SeLFCO8s?aEf94PBqeF2wMw=}>x6nL zj35!soO*y}HrYlqr#@GAXy>?4v9<1x@$%GH9{9&Eu2V3r_Jp7}43(3(FXE5~bOTn*#PUaBRv znOQB8QpHl8A~2ih5Ljwd1ZMLcg0@PlWaU~XETuv+yW2$8HYDPhcO${LKOp;)jh+mV znMf|1gCJ!|&SqxEAt{?#nyLuQs6Ey%+QefzF3NC>zS9iuRv2QDM#qUcL!!_by1Ov* z1bza^g%VjB5)E3og{6-u0yF+hQW3PGry;oqiS;n|N#+)2lnr1R!m^Po6=efKKITek zi&pCJx%KY1^)i1O377fW9(S{7!Y^!A=Hx*yFw3%QWKP>%okOW#+fvL`1&f$blIv&u zzQQByo*=a>Vm8^u#YrKBJ;-;`dCtIK^%^e$_lr%p?I$3ZeezwEVeOQhh#HR zk0RMJ?z*dirfJNT#b<0p@o^+WoZ;rIvpJd5N<*Bv92spvQQLvyR$y2gidtUht`3il zr2k=rzrQ_N(mmc?jd!CptBd?Tou(z-+FY@Q7cMiR7cMUS@5bb8rbdasM`g#b;TY(n zD?4he;!6=KkzhWvS|sHjmKqg-8GjEG>o;AAtKqQ>$0YFe2*)Ya%uaMvvs9u8%xGJz zO1>i@K`}5(b{JU7Py}YIVU(n8?lFxzCZQIq-Fzhan)wnW^zgaJmZ{=OWalCI5pjb1 za<{PDr$}p&U5vy7=L9^Zx`n{UC9UO3WY;*fQ**Zv__U&Z9@z~J?cv-l1a4Ne+mYQN zi>=#`-KUDWJ8155B$`W3l38Z{Z6xP(eJ6mYk7;a$1+pkJ(@Eo58KsHDz6j z-&2)~_X7?$t@j`4- z8vk}-se5t$dx=M{>ODq;)6!Uf@n`sTNazY?^Z4^Kc^{aiMnzyY-y!JQwImy?MWKaq zWOn;OiyZS9_`@^s_uwBvf(6WI+_9qHF+B0%ZTRpS-iL#nZjNo9Ybse{VAz?GvG@T8 zA1nR7EqC`SP6MKHPEn&`IUS$B2ifHS&FMnX=;&0}4DOl|v8PEqyf0TCd1wZ1FJchf zI1VDgIn4MYaaUtV9gx(8%pR4+Ma=$yq-IXKN`O`?Kiy0NfBc$RUOXq}fTd0V3(<NzA+%sB#QiTLP^B7xuN^T(9<;P+$r@X?>e z$oXi`dgS_VXYz3!{uql7=kVuYZOHlV1pW6A^&j};qeP_Z4`obo1Aj~_QTnfdZ3Ukb ztw5PB`M#T~`S>)?6e-7 z_n(t*Ccp6E&(io&zm~?&(G-aBqdxpms(!IOG34jH6uxVWpIhWNp6;^qsdmnvwDE)I z`{YN%FjjsB?VNV<^Cy)#`Uu{JWQtew-0l0Z%||^a!j7A5IBe%|w*2UN-S7{<&z|_P zos$u-DUcu4Lui`~vw!)aKY0c{EFslb8gHXS27GLa3*aiP1-`e5+RwV()W^@UU|qka zkIvn8x%EtzT9v&lYCWuv=gT{7x|ByCU_Q>yNg~Wkcu7ZD+c`R)PG)>`uItfuYJT#( zjf7b^&FvTVDc6x7kO3b({_+(l>(%cjAxe*rY@4q6b*}9l4RgHdSK&}p+m&YP(Ycm? zuiUMldni4w^tf)c^=f|*EJQNJ*|T-~^(zeYI|pnLn=ijY^K~P7HG_D+jAEKg%~{NM zhmRDtOaDq$|MFD-j8*@}Rcl~;V{Bt$Y-5tK4e^Yzjft_1iLs4|v5kqbjfpW#>tmU* zjEONz<5_0xVq)xKVobs`5ls4{VbU0@n0SAS@rtpEiLpoXz2BTNj8U4OWyT5(|D*HK z?a}&KCu5F=-zz6CV-pi&&U^7|I(gMSB;{X?KbBpZ{_o0Zt3V9U^|LHv5pu>Ljc1v$ zLc@P=KH3k|sdjI%{?htMW9-oI-p z<#>fk=RntB&p z=fbW*c7hPg`}>EBR&YgGfsSrpv3gojH^!l8@9bLHG15ESK77$Y*AQ?Rn0UKRXHVZS z0E|_5c(`kI^o2XX;%5iW`*%ix?JGL^fWn5-;b>nq(9=H}H!_6x_>4vlu2`W^!+0Oh zAc~wABF^MeY~5iRg?RUk=`X^!QRFWPmNqTTE18yuzbc6t6lZdww%!!Rv?YzRX3bhs zJPTQIaq+AR8}L#N$-yPu`iW_r+|bxCYe~bbS&d7UG|c`ixr&QRiqAT$p%MHNDxPHq zln~c^>qWyT>C3a$MH;m(F8|haBfnHv&wYUPQ(^c_>$f4J%evy?h*rU^fpvpn96zV$ zyvErJt*mP=Dz`c#OPl7fDgJr>CNoi0#?6Cujb%);au-`YGnYvEOuw~uv6VivRC8N{ zMcNGRGOX_jZO06T74bLp>rsP?H?5=Zbb6O*9TN)wxo?(w7c2gQf=h2#r;05{L=#3B zCz@bzx`NLKk1f$a;tCMaIOBv5#td$^tzx6J0n>a*1K!B5Vg#{|3gfuqkItTLB`mhq z&75s=4Zev}M!bT6bCiiw{CD<}H{Cw)bUSjnk!#k6A6MvEXQV_|7G8W=F9(dga>Q2i z9Dbd}uURtG7Wo^O%s_OVY2ANGQRUKx`Awx(?!3nNBsQHxM*NXLJ96{#&AQz(tWZR+ z2)vTBo;8euvzvRGtn_(S;!M3Fa9y(=Fu`p!T2G6`v#f2GM6i0yywJMilEt$MiwkC3 zNi&yN!z-=uN;8ZBYT#vgrkKL`e&n|C$N~B;+kv6M7615s*#D;+JZ~i!b-nN|<4SHb zojE2qg8!ho`vLcxG3$VwX@5*GGEXkB)<*CyKe-O@5XCwuj6y2`vuw@EC1y|&c&fs! znw4fWS*zz+S&{q+G8WA9H!rN5AN`kiQprU8J8As!P5IWhF?q3=xc_G@cI29mvo4HS z-?*em*Ulpw>o&~(_(;>5p3?L3@+O{C$*%=g%FH=d{L0dvs>%_ot*D#Ga(-FKi>;*L zbteAk6Zg72?6KBcMpkKo`jk5RP}$%+EMv@?4LxSOVwbqbfScT^S3-$;2^y@VNYkoS z)&;}(jtNg2@LTZs$o%<@*4iQ~C1R~Cvc^X?%sFeK6`I$up-DMl!hAcQ)?_U#I@t;r zT{v-~4uGJxi8CgRl&s#^IQy&yEb0vnO~*G{okdpWux69OyC8hL(@Gv@S$lyhoL*p! zMCR*lvt+%(Z&(RN0lMD`71`aq*k6W_pANM}*3u%YbDlL(ljix$8ey}waHUlyuR;8a z{rM$JtaFRVkN@!z({TCwIlqz9W35>X<%KbX*ZoGWbiC!Q=!%Cj819Y4FMyk zFvgSHCB`1XlIMvdcwP+{+2~~Zf=4o47c_F`EInEOw-Sq%O`_MEimYV&zaE&9|E-{r zT~$(1QEhdjO*5xWi}CNh@wkk!CcoZbof)xaUW?@pi({mv!CDisPQA9lYKSx(-%#NC zrywgi5@Xa23C0-f)L>ePRXg+IVh)asdBxWGMb^}nrPiXN;^T`8WGW~vD1~E7ily{h z^6ca!ZxQ^*zvA{?wz%FR_;)XY@`~kOunI=6jG_zhk;~wpu;5kjQ)Mlm*KoG;@7%MN znklZxwZ$;tBJvx|#Q&TpDtVlBoxIJ4MFSh)&&kC@QVb`@ek592q#haVf?_*F>@YZ-Y7jJi3567S+*H7a|wd&>3h|93`jB(jr2}W*S+4QpF zb0=Bdk#Zi>xcAT7Orw}9-VA>6V8}iln&&TR##%KqW>t70!N`d5;lTtWyLl3J$1ys$ zCK}n&hHuNTUhIW+FRcG(gmrb}?q3<$qf3hGrXi2`<$TBMK)I)_vU=y8b)Nj!i`}e! zD9dLTtZmr4j+r;DsbEID!e8VhGt7Pf3$I;Z)HV(XkDTn<|)*T!sru?xk zW@g`o^O}Un$;F?I-HPINVg`6ME1!n2Uc^c>xj!bxY{bcMI8s_XyKH*?agA1AQQ65c z0pVdB&Op7jZe`5+@k?wnyJIkKfN@m}<_g~twS5JsSf+0t$+XLd7-R=JK73(e|2f9F zn<}0A8Za@M^Vq5>nk*F6SH;U^ZQLQo2^K)3aMsaNiDzylb?S-$x$Gdxz}qKcVxVe7+!7cl7lA^KNkR?x}p%!F5+tKCTgc z0D@!shr%eX*x1(I5{v!X9-X%@Vjg5^9@fSdRM&sG?236yEI6JdX zjrnL3?uq7?kUpJXCGzrn7$Y0cyz~1g!x;C?j`}y3?1wY>T$J^MFiP_ZaGc8|vr?2x zN{X$sBQvHKBiPx;mVA23Iv@;rAo>kCeP$nP`uyAOy#L=n@cNIsvn$Qnb<5^D%Y{u==7(SL~mGbGFeK@kd z?vk0-|B89VxW%z)s7TKbKC);19Dk`*3-Q@K>o?TG%c81^`R&zR^?g0VqN<~>Wo^^Y zD$!Wg&?1I;v#Wji$WS|4+S9j6w6~Ao`KeRehsE4xJT})l(ACx1URu&rw@y$=>+s;n zieaS)U>lyis_t4TTB_SxM0I^@MP*}+=si(9szg*ZFRHJWT$Qb*c3vi+v&E&6iWULY);_muxVE=rRqJra@W_yjYwj5A z8NNu&ZEJ3k3Yz*myKIsy$|kYYUf;Y(tX(lsHQe8_wy~>k)o{1XSJ^Sr+0rrGCEBVR zTSU!#*&?>QZEaIWPj6-aTBp(fgJKbE>&4`PanD%{vf@gazT?qM>)m(GwQ3_TjdyU=^E-%z1;+BJ63fyclF_!Jp2(l z4k+9E)ndqTsM8VX%faC`JV2*dox!!%RwQa$OIzG(=C{{2E~sd$pFdZe(YByPbao7P zxabwN?F*{K@KD#PQuqR*_59<5Q8N~d43nXvz6F23tD1hQ#G{5){i_$jj;iji73Wv1 z81A{SW4NckuchmPk*=X((bPoGDko|KYt|0ecM41-*v^IysbSvIwWQvQo1`hSC>l(%kRJ?L(MZ3i5JjqJ6 z%Bq;k*k=B1z^c;H$jL?1ib^A8C8ej7l$FkiOdjm&?dllnIw7(Y56KpHtzO>M+1b^3 z(#a<+AMEH`(H$AY6Qo1%Or&i3j2We6=R{6gJ={IAdO7kH10%B#E{D6;p0s*e5^ue|LeJ2fd$$SVn_MRKY;=SVhlW^sk1#V34ou zagQf-baS)I3-e(H{LY>)Q~iAmzi6-5+U9ihGM;paVMNKwks-T3V@C{XYOAhm5qMY? zy)J1gO3si`k_ZJm%4;jo;jSL&Z0uiScYRCOiY`3qTFrs0rVm%}s^0z;=ZgW%_7xqy zXb5F(PFZetC@nRuH7#en7+tG?j0_d^^JNR&qm&V05aHhC zLQaf|AucZbLzzySW^i=_r}V!)O6Mu)g$Zk=}~LsETbQ^)X%?k=>lwMC7>w#Bt-vb42TH3_>#rK4IDZALT( z@~@c6-TeyfGPqlMjXf^=PmlSi_$aTcwVxA!Ec3CFi#kRjhFp7yS6+k}*x1$C*1u{M zdSIB{-@c-Mqz|#Qy$_P0Nv$wPJ-&(W_F>75Js0P%9D#Bnl8aodirx;yaWzJ}h9#Z% zAlrMmI~wTiT|LsoP`D1o|ytesI;XO3oZ*}KdT` z;fvV*SKA4N#F%bTD~p6N2K!fY=upFIwP9$--@TPP25M=;YBRK&TM|ccWk=unc8Dhj zCVXRSrRJ*{9PA%-`pqVz$89_|g!HRR+nF8bcP$za^Sjm%sb)OJ^@^@utx_7Qq`3PP z*tsY}C84#q<3jw&U5ppnB~kdpy@S{_^sQpU^v;2Uuzy4ah*-^SwjQ`o)DO2~NOGnf zaqRFe53u3ENc=cP|6O5BdtCC{uBmTxwG~5ju2|F2Gu%GZ+i|{NfUzCfMYpZse%W^Z za_kPHE=Mer3acyU)(&=cty6A_X{T6;u`#@QKv(SAozs+hbhKQy0jw3;0o>gz?_Voq zc#fKit(3e*p`aXh^=^Its~AYX=)_Ozfxrcyt8V-OvuWT3MVKV-6dp&8pVnzmwOa1gCo&7PNh*z32dC>OidIn&&3 zuB$566EzeH8nJz`>#_BtDN4O;I|WKbQ$=%&y*)e92ex=cEv^}K6hf1@81?r_QK@gO zs5t|kQkJ7hw&@>g`q)ptIPHvfztd+l%kB_*sjjNAK}E&tDim$oNjY-x5{roCjCIPk zV@~1nqHo1TI=0#y3<)-aqwK>)1m0?1p_DZ?a?HxUt*ach=u0eCB!yNRP|4a2Ov&EZS|jt8HoC(#oN&fx>yeYxj!dj}QEO$a=Nen^*vbIi--jtM(j_Wnw~gur z87pNajg77*z!+C#BVCzpv$QU%s;X&il{Ux?!jK-lWQ|=zRimP;tzDQcIKZ$k1nh2t z&zeShB^TUmH&%(dES7`B1+z9M}5?Q`~xErk&$Me5sR#%kp+10^IIt8J>Tav6l}aM!A? z!OorwdpdC?vPd2kRW;XD#9nU=szslbDHd#rq8C*P)mT5jaW~fPHbM8eR^8Vr*A4}uL8@TyI}}jeR1sCwi0ukPjV&-(UBP{X=onbO zLS7gu{E?wW;pdLvJc!p!w*1lBVf#)A$bqhk_RQ85AdI`VJqp{pnujB(Vtz$cL)2#3 zc-QHmyy3ZadB>18BRceLJzc{Uot=X`&~gx?O>f0MQ1*d#h2BFb2{;X#D@9wYwP^FA zrs-;y_Y8A+SF#K6^U~Ii)dRiQrJWk(bw_5!2=_(F_2`Qj-^pfc>qx|iS~=JuSE-I( zJq$n8a-?rttN4K~8M4Esvdhtxf@5otY7xu!)S)y3R}GH}1k6xti%t$W!aW0m$()Kc&qrS^SmChPN$<#d zWLv7cdhEd^yBeblU1wJecU1J^xB5=QO4}=28Wdy?0NZ_TH`~H)lxLZcKJoS}tK8WDW2oap{Mr!O6-Ux0qtUy@q9~_EIt{mykmYE7I@wsz?rQq-KrhkKt((@EeF{nIHY`FU_al z0jBx1UHsX58~7`deY7c3n~?0Q#GfV9a{QJ1X#GdD9}VS?erHNOPW!SKqkU2j==xn^ z+WyggGzE3Hfa3g__b%XtUKxh^7C^&(&)Mf-)GZV zrXIrjePmj{=F{&di`abnJ!N)ZU16Aw2~T|QacQlV;m^d#uVEDByUg4$-__)X`EIkR zNZPhtD7PkuH~KEOt}s7gnAP8xwbVpWvGN0>^zof&>}TrZ54mnb8U4Hwni7G*O?n0O=my2>3sK^8|FKz`ki-jUS6Q4rMvAhw&0mcH>}@_cPxJWo;)|5Sj8btt0+@LH9zNIFIN6+=kQ~D5Kz&-4@r$-|`%TO1SgYaDbR8Q>*Y5{(>v!7@Qv}}= z=%$Z`N9+Hv@VnX1=RkG*)9qt>+`j#Py`61{T}K(m&&|fflD=$~fTGb}bxqpZ-n=wv z6R~Z!I% zB_A)GFP7~1bd=Xc9N5_lhiNd_N%!zDBP1YqyW$yTJ?YfJUXD|eN)OaPxyf{fS&x`n zxTh60D&igOKzzdh^c*KK@cuw&N zJTne21y4G>3jCDAYrsbwUJn*ik{{fhP;nmLL+IC>y!yW*!j->W{O(Nc!5SgNxAv61 zDdY=N`_2K&-gOB}{v=rK70W$8$gO>0+ZE3sH_UMa!Tu^2|0U$BGyChE{0wsHu&#P6 zifG^ZlS=R!p@wT<<tIM4&v1Q(+>XxePLZ$WMB5|`lAv18|1>O&l*_r z_9*Tv{(#(^^$)ELV_59(-*mW+Kx;!Uf6L)Fu{T40WY+Q{9Q9-V4m!-jyb$*J?^WdB z`ic+4OKL!tzxJ81bBY^~zf1b3(6ILTKI_XEKaOXuLk)i#{gYq?NWadn)}tm@{S=&R z;_*(GpN(Deqjjj)|BS_bGt@R8m{wbHg9bNLL zHIeDp@o2r`vDPadYkgr@_SflL)!<@(_+eU?X%;iqCB1MCtJ8nW#jh)zd2tX^|FZu< zhwEU?lf8VE!;)*B?B!cCj7(~{dBr0!f2n`X3+d6<>OqYB3FN{W6E(2%b6s^??kkRV zDWB%IF@DVdBIY=T>v%Lb^;q*kk2T*itn}`Sw|RVh#q(X#(;Uk5??iVSSaT}t?}P6C zR+l}8Wq+ocCiE5G>0)2=DYGyAQx4a`nqPVOd50y}Jj=^3IxM;7U0!}=h7VQkF~9f$ z`4gs1XpeZkIN|btrc3@cZ}avCGu&TIi~5RlUEdI;0xHVm#Tj0f;Q{bA zu0I!v-$(qdV5_}e&4<7>%A@fh`D7OVG4Qjgywd+dCO?|tuY;|;y_ENOCVvS$K!4WE zQ|Y}5w)HAu%l|&cuE$yjuf@JPi0t2x$!`PK7|)B7 z{Ju=S2mC40`%02ef_;8I560E?)vN1C7XQoOkC49E|7s@xuH-KL(_mj;zXmU)z6Y_d z{GZR_*LYBM1^1UVNq!~xbE$o#-v{2#{KnG17VPV1MTXab4_D=xUu?|eC3u|vr}WhS zCNlZsVBSfFXUj_eN$@MwAI%iBtoR)${$Z{U7$BI%#W`}LH+FJ=1Q z0RP<8$M-V%%NhO^_zE{IlSb z*weaM@_RG+e(+}clgS?izs&q;ebRpdJnH)27qj@!W%$P#KAYj+gV(z8@ecSH{cCGV zk8>+J%G;OWCAxQPwefl3QX`Y!0d9}ydBw&|et(Adf$e&{kn8bmCVwi!&w+=?uhrL2 zGx=*7KA+)tGrWL%nQz~Zg8%N?Ybp2@@QtZ{R%H6!w)(7*mwVEt2qpRVl%u--k6S-5)}PxMQOp^gp1Fs)3V$!SZ>79hVsr0n>OEF zmIRG7%dvgU;h}xy2(QPd%Ao@@9B&I50;xvY z@1c;ZFOUxB%X)8k?;0~Tz!xp z_rIRNKRmvFSt81e?cRO)f&5{Al7b(;^`?nsbn)><^Z%FFeiAD?JF>QYOtu19q3YZU zQ$3^rIEnlxL9P}{Wy1dOs$T0r0lM2?09X|G?TTUdxF((RpHMY&~sKf5$xKbH5h zJxtvGK(8?ML{KnTPK`tMA1V@8z=H4IvboAdS&q((kIXROM*;;TunSBva)&xOktJ7= z8A?5+Ym;$`{l=||j9^wAEy#kRVZS}f(P~UdoFVO;$Y`u>?u#jgTx=Grq%6smc8Rp6 zbt#+*r8jDjsmH`cmTD7^OqSBj_sduqNWi_JgBCld;$PtOP!gMPRdXAZ8g> zB902Dp1H!PRi=}O;8Uq?q>~s;reXXf!xPY-n!C%f(dkKeMcSrWZY`i1MV?XB9Dz*- zS*i-~*$xCHGpKB4yJ?k;jy9@zU|sldW+&YZLzP9AajZSv*8`8PlbvPJe7-t5V`!Ji zWHMdjsTuAZFBKu1ZkP6VVI%OOEJCoENL?0Ivh`LwG(!7`=hPO20qkjECJMc-!}3@; zxo7_l<|xd05*0C!rYwdpW=BMuM0DR097a{*F`B80CTIZ_P0j*B_B#5eqj8y1Xj4X+ z<6L%-!A!4cOwCSA4-NA>-HN|^%{M;PDjyDoE*jy&+-NmJr8Q{ubfYR7?U`NCh*Diw z8s&j0Hr?&jz=|!_iZ8M@>T3iv|m(5ayFiqW??xVf0usvSPyNdCe}?YYIrtyi39IvrH}Yo{3Mf z%e{uvI$7=}KGKstJrCg%{?82DdX7g~D?Ko*nR%rS0U`XMm61=1EV_qxf{y z+k#x_N)J~T(%RCT+16iuvJ?w?T0bp9Z_}QjOS(^IdcWXd|Ht|jBRaFEzx*`6ByS(A z6>nQ1!Kw?n<9xi{>%0Kk*+oy!H@x1OBemj3>Kw_L>@-;Znr$p dSIY~fjn1Cz$mvaS>Qe!q`!nqkeDTZl{sVb)AK?H1 literal 0 HcmV?d00001 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.srec b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.srec new file mode 100755 index 00000000..670f12d8 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/Debug/demoprog_olimex_stm32p103.srec @@ -0,0 +1,240 @@ +S021000064656D6F70726F675F6F6C696D65785F73746D3332703130332E737265639D +S3150800600000500020696D0008B96D0008B96D0008D8 +S31508006010B96D0008B96D0008B96D000800000000E8 +S31508006020000000000000000000000000B96D000834 +S31508006030B96D000800000000B96D0008016E00087F +S31508006040B96D0008B96D0008B96D0008B96D00088A +S31508006050B96D0008B96D0008B96D0008B96D00087A +S31508006060B96D0008B96D0008B96D0008B96D00086A +S31508006070B96D0008B96D0008B96D0008B96D00085A +S31508006080B96D0008B96D0008B96D0008B96D00084A +S31508006090B96D0008B96D0008B96D0008B96D00083A +S315080060A0B96D0008B96D0008B96D0008B96D00082A +S315080060B0B96D0008B96D0008B96D0008B96D00081A +S315080060C0B96D0008B96D0008B96D0008B96D00080A +S315080060D0B96D0008B96D0008B96D0008B96D0008FA +S315080060E0B96D0008B96D0008B96D00080000000018 +S315080060F00000000000000000000000000000000092 +S3150800610000000000000000005FF808F111EEAA5533 +S3150800611010B5054C237833B9044B13B10448AFF3D3 +S3150800612000800123237010BD140000200000000029 +S31508006130586E000808B5034B1BB103490348AFF373 +S31508006140008008BD0000000018000020586E0008F6 +S31508006150F0B5002401E00134E4B2112C20D8114D29 +S3150800616015F8147005EB440595F801E007EB0E05E4 +S3150800617005FB000548F6A04C9CFBF5F605FB16C684 +S31508006180002EE8D19CFBF5F5ADB20D80013DADB210 +S31508006190B5F5806FDFD2177083F800E00120F0BDF7 +S315080061A00020F0BD706E000830B587B001214FF4AD +S315080061B0003000F0B3FC0121052000F0A1FC1823F3 +S315080061C08DF817300425ADF8145003238DF81630D2 +S315080061D0144C05A9204600F0A8FB8DF81750082393 +S315080061E0ADF8143005A9204600F09FFB4FF4614333 +S315080061F001930023ADF80830ADF80A30ADF80C303D +S31508006200ADF810300C23ADF80E30A4F544440DEB70 +S315080062100501204600F09EFC0121204600F0FEFC08 +S3150800622007B030BD0008014030B58BB001210846E3 +S3150800623000F066FC0121082000F062FC4FF4807330 +S31508006240ADF8243048238DF82730344C09A9204668 +S3150800625000F06BFB4FF40073ADF8243018238DF86B +S31508006260273003238DF8263009A9204600F05DFB68 +S3150800627001214FF4EA1000F0ABFB01214FF000704A +S3150800628000F04CFC264D284600F0BEF906A800F0A2 +S31508006290DDFA01AB0DF105020DF106014FF4FA70B6 +S315080062A0FFF756FF00248DF81E408DF81F408DF825 +S315080062B020408DF821408DF822408DF823408DF836 +S315080062C01A408DF81B409DF80530013B8DF81C30AF +S315080062D09DF80430013B8DF81D30BDF80630ADF849 +S315080062E0183006A9284600F0ABF98DF812408DF84B +S315080062F0134001238DF81430ADF80840ADF80A4074 +S31508006300ADF80C40ADF80E40ADF810408DF81530DC +S3150800631002A800F01DFA0BB030BD00BF000C01400A +S315080063200064004010B504462021064800F088FCA9 +S31508006330012801D0002010BD024800F07DFC207025 +S31508006340012010BD0044004008B5FFF72DFFFFF7F8 +S315080063506BFF08BD0449CA6802F4E062034B1343A5 +S31508006360CB60BFF34F8FFEE700ED00E00400FA05AF +S3150800637008B5224B1B78B3B92148FFF7D3FF01288C +S3150800638000D008BD1E4B1B78013BDBB23F2BF8D86B +S3150800639000F030FD1B4B18600122184B1A700022C2 +S315080063A0194B1A7008BD184B1B780133144818444A +S315080063B0FFF7B8FF01280AD000F01CFD114B1B6837 +S315080063C064339842DDD900220C4B1A70D9E70E4A7D +S315080063D013780133DBB21370094A12789342D0D18D +S315080063E00022064B1A70064B5B78FF2BC9D1044B6B +S315080063F09B78002BC5D1FFF7ADFF00BF71000020C9 +S3150800640030000020740000207200002000B587B01C +S315080064100021124800F07CFA10B907B05DF804FBB9 +S3150800642001AA00210D4800F021FA9DF80C3033B975 +S3150800643040F26763019A9A420ED0002300E00023D7 +S31508006440002BEAD09DF80F30FF2BE6D19DF81030CF +S31508006450002BE2D1FFF77EFF0123F1E7006400403D +S3150800646008B5FFF785FFFFF7D1FF08BD30B583B044 +S315080064700121102000F044FB4FF48055ADF804507C +S3150800648003238DF8063010238DF80730054C01A933 +S31508006490204600F04AFA2946204600F095FA03B04D +S315080064A030BD00BF0010014010B500F0A3FC0F4B33 +S315080064B01B68C31AB3F5FA7F0DD304460C4B1B7839 +S315080064C053B901220A4B1A704FF48051094800F05B +S315080064D07DFA064B1C6010BD0022054B1A704FF45E +S315080064E08051044800F070FAF3E700BF7C000020F2 +S315080064F0780000200010014082B000230193009329 +S315080065002C4A136843F4803313602A4B1B6803F440 +S3150800651000330093019B01330193009B1BB9019B38 +S31508006520B3F5A06FF1D1234B1B6813F4003F06D0D7 +S3150800653001230093009B012B04D002B0704700236F +S315080065400093F7E71C4B1A6842F010021A601A68A3 +S3150800655022F003021A601A6842F002021A60A3F5D2 +S3150800656080535A685A605A685A605A6842F4806278 +S315080065705A605A6822F47C125A605A6842F4E81241 +S315080065805A601A6842F080721A600A4B1B6813F048 +S31508006590007FFAD0074B5A6822F003025A605A68FD +S315080065A042F002025A60034B5B6803F00C03082BA7 +S315080065B0F9D1C2E7001002400020024008B5FFF7F3 +S315080065C09BFF08BD08B50E4B1A6842F001021A6017 +S315080065D059680C4A0A405A601A6822F0847222F4F2 +S315080065E080321A601A6822F480221A605A6822F4E5 +S315080065F0FE025A604FF41F029A60FFF7DFFF08BDDC +S31508006600001002400000FFF808B50C4B98420AD06B +S3150800661001214FF0806000F08FFA00214FF0806072 +S3150800662000F08AFA08BD01214FF0007000F084FAE4 +S3150800663000214FF0007000F07FFA08BD00640040AA +S31508006640036823F002030360036843F00103036051 +S31508006650002300E00133426812F0010F03D14FF620 +S31508006660FF729342F6D1436813F0010F6DD08B7910 +S31508006670012B3BD0036823F080030360CB79012B01 +S3150800668039D0036823F0400303600B7A012B37D017 +S31508006690036823F0200303604B7A012B35D0036887 +S315080066A023F0100303608B7A012B33D0036823F0A1 +S315080066B008030360CB7A012B31D0036823F0040367 +S315080066C003608A78CB781B0643EA82730A7943EA21 +S315080066D002434A7943EA02530A88013A1343C361DB +S315080066E0036823F00103036000231EE0036843F0F8 +S315080066F080030360C2E7036843F040030360C4E70E +S31508006700036843F020030360C6E7036843F01003F9 +S315080067100360C8E7036843F008030360CAE7036831 +S3150800672043F004030360CCE70133426812F0010F1B +S3150800673003D04FF6FF729342F6D1436813F0010F68 +S3150800674001D10120704700207047002070470000E3 +S3150800675070B4837A012202FA03F33B4AD2F8001294 +S3150800676041F00101C2F80012D2F81C42D9430C408C +S31508006770C2F81C42027BB2B9334AD2F80C420C402A +S31508006780C2F80C42847AC688458845EA06454834E4 +S3150800679042F83450857A8688048844EA064448359F +S315080067A002EBC5025460027B012A1FD0C27A002A76 +S315080067B034D1254CD4F804220A40C4F804220289AC +S315080067C02AB9214AD2F814422140C2F81412028981 +S315080067D0012A2AD0427B012A2ED01B4AD2F800323F +S315080067E023F00103C2F8003270BC7047164AD2F88B +S315080067F00C421C43C2F80C42847A0688458845EA4E +S315080068000645483442F83450857A8688C48844EA6E +S315080068100644483502EBC5025460C7E70A4CD4F86B +S3150800682004221A43C4F80422C9E70749D1F81422F6 +S315080068301A43C1F81422CDE7034AD2F81C120B43B7 +S31508006840C2F81C32C9E700BF006400400023837108 +S31508006850C371037243728372C3728370C370032356 +S3150800686003710223437101230380704710B401F1B9 +S315080068701B031B01C35803F004031372002B3BD1FF +S3150800688001F11B031B01C3585B0D136001F11B03C8 +S315080068901B01C418C35803F002035372636803F05C +S315080068A00F03937263681B0AD37400EB0113D3F8C2 +S315080068B0B841D472D3F8B841240A1473D3F8B8414E +S315080068C0240C5473D3F8B841240E9473D3F8BC41FE +S315080068D0D473D3F8BC41240A1474D3F8BC41240CED +S315080068E05474D3F8BC311B0E937461B1036943F039 +S315080068F02003036110BC704701F11B031B01C35839 +S31508006900DB085360C2E7C36843F02003C360F1E7BE +S3150800691019B1012905D000207047C06800F00300AE +S315080069207047006900F003007047F0B4CB7803F0B5 +S315080069300F02154613F0100F01D08D7815430B780A +S31508006940E3B10668002301E042610133072B14D83E +S3150800695001229A400C8832EA0404F6D19C000F27DB +S31508006960A74026EA070605FA04F42643CC78282C1D +S31508006970EAD0482CE9D10261E7E706600B88FF2BCD +S3150800698020D94668002302E0426115E00133072B4F +S3150800699017D803F108040122A2400C8832EA04043D +S315080069A0F4D19C000F27A74026EA070605FA04F447 +S315080069B02643CC78282CE7D0CC78482CE6D102613F +S315080069C0E4E74660F0BC7047016170474161704773 +S315080069D030B400281DDB1A4B5B68C0F3034582B24E +S315080069E000F44014B4F5401F16D010F4801F1BD0D5 +S315080069F00324AC4023EA040343F0706319B1410D44 +S31508006A0009018A401343002817DB0D4A536030BC3E +S31508006A1070470B4BDB69E0E723F07063084D6C6841 +S31508006A2024F070646C60E9E7440D240102FA04F46A +S31508006A3023EA040343F07063E0E7014AD361E6E71B +S31508006A400000014010B4294B5B6803F00C03042BCB +S31508006A502BD0082B2CD013B1254B036001E0244B17 +S31508006A60036022494B68C3F30313224CE35CDAB292 +S31508006A700368D34043604A68C2F30222A25CD2B2DA +S31508006A8023FA02F282604A68C2F3C222A25CD2B238 +S31508006A90D340C3604A68C2F3813217498A5CD2B2CE +S31508006AA0B3FBF2F3036110BC7047114B0360D8E7E0 +S31508006AB00E4A53685268C3F38343023312F4803F85 +S31508006AC009D00A4A526812F4003F09D00B4A02FB61 +S31508006AD003F30360C5E7094A02FB03F30360C0E753 +S31508006AE0034A02FB03F30360BBE700BF0010024042 +S31508006AF000127A00040000200000002000093D0072 +S31508006B0029B9054A936923EA000090617047024A49 +S31508006B1093691843906170470010024029B9054AE5 +S31508006B20D36923EA0000D0617047024AD369184343 +S31508006B30D06170470010024029B9054A136923EA53 +S31508006B40000010617047024A1369184310617047C4 +S31508006B500010024030B587B004460D46038A9BB242 +S31508006B60CA8823F440531343038283899BB28988D6 +S31508006B7028896A8901430A4323F4B05323F00C0396 +S31508006B801343A381A38A9BB2AA8923F440731343B0 +S31508006B90A38201A8FFF756FF1E4B9C4224D0039BF5 +S31508006BA0A28912F4004F21D103EB830303EB83037D +S31508006BB029688900B3FBF1F1174BA3FB0123580998 +S31508006BC00501642300FB1313A28912F4004F16D1A2 +S31508006BD01B013233104AA2FB0323C3F343132B438F +S31508006BE09BB2238107B030BD049BD9E703EB83032F +S31508006BF003EB830329684900B3FBF1F1DCE7D9000D +S31508006C003231054AA2FB0131C1F3421245EA0203B9 +S31508006C10E6E700BF003801401F85EB5131B983898B +S31508006C209BB223F400539BB28381704783899BB23E +S31508006C3043F40053838170478088C0F30800704787 +S31508006C400388194201D100207047012070470000CF +S31508006C5000B583B000230193009303F1804303F545 +S31508006C6004331A6842F001021A605968364A0A4023 +S31508006C705A601A6822F0847222F480321A601A68FE +S31508006C8022F480221A605A6822F4FE025A604FF4EF +S31508006C901F029A601A6842F480321A602B4B1B68EE +S31508006CA003F400330093019B01330193009B23B93E +S31508006CB0019A40F2DC539A42F0D1244B1B6813F434 +S31508006CC0003F00D1FEE7224B1A6842F010021A6014 +S31508006CD01A6822F003021A601A6842F002021A6061 +S31508006CE0A3F580535A685A605A6842F400525A60AB +S31508006CF05A6842F480625A605A6822F47C125A60D2 +S31508006D005A6842F4E8125A601A6842F080721A60A9 +S31508006D100E4B1B6813F0007FFAD00C4B5A6822F012 +S31508006D2003025A605A6842F002025A60074B5B68CF +S31508006D3003F00C03082BF9D1FFF798FB00F044F891 +S31508006D4003B05DF804FB00BF0000FFF80010024026 +S31508006D500020024008B5FFF77BFFFFF7F5FAFFF7BB +S31508006D60A3FBFFF77DFBFAE7DFF834D0002103E049 +S31508006D700C4B5B58435004310B480C4B42189A4253 +S31508006D80F6D30B4A02E0002342F8043B094B9A4229 +S31508006D90F9D3FFF717FC00F03BF8FFF7DBFF704766 +S31508006DA0005000209C6E00080000002014000020FF +S31508006DB01400002084000020FEE70000014B186044 +S31508006DC0704700BF8000002008B5074B074A5A6085 +S31508006DD0F021074A82F823100020986007221A60DB +S31508006DE0FFF7ECFF08BD00BF10E000E03F19010007 +S31508006DF000ED00E0014B1868704700BF80000020D6 +S31508006E00024A136801331360704700BF80000020F0 +S31508006E1070B500250C4E0D4CA41BA410A54209D133 +S31508006E2000F01AF800250A4E0A4CA41BA410A54225 +S31508006E3005D170BD56F8253098470135EEE756F866 +S31508006E40253098470135F2E7946E0008946E0008DD +S31508006E50946E0008986E0008F8B500BFF8BC08BC28 +S31508006E609E467047F8B500BFF8BC08BC9E467047FA +S31508006E7005020602060307030803090309040A04B0 +S31508006E800B040C040C050D050E050F050F06100660 +S30908006E9010071008C1 +S30908006E94356100084E +S30908006E98116100086E +S31508006E9C02040608000000000102030401020304B0 +S30908006EAC06070809B6 +S70508006D691C diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.c new file mode 100644 index 00000000..e7c64c0d --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.c @@ -0,0 +1,432 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\boot.c +* \brief Demo program bootloader interface source file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "header.h" /* generic header */ + + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +#if (BOOT_COM_UART_ENABLE > 0) +static void BootComUartInit(void); +static void BootComUartCheckActivationRequest(void); +#endif +#if (BOOT_COM_CAN_ENABLE > 0) +static void BootComCanInit(void); +static void BootComCanCheckActivationRequest(void); +#endif + +/************************************************************************************//** +** \brief Initializes the communication interface. +** \return none. +** +****************************************************************************************/ +void BootComInit(void) +{ +#if (BOOT_COM_UART_ENABLE > 0) + BootComUartInit(); +#endif +#if (BOOT_COM_CAN_ENABLE > 0) + BootComCanInit(); +#endif +} /*** end of BootComInit ***/ + + +/************************************************************************************//** +** \brief Receives the CONNECT request from the host, which indicates that the +** bootloader should be activated and, if so, activates it. +** \return none. +** +****************************************************************************************/ +void BootComCheckActivationRequest(void) +{ +#if (BOOT_COM_UART_ENABLE > 0) + BootComUartCheckActivationRequest(); +#endif +#if (BOOT_COM_CAN_ENABLE > 0) + BootComCanCheckActivationRequest(); +#endif +} /*** end of BootComCheckActivationRequest ***/ + + +/************************************************************************************//** +** \brief Bootloader activation function. +** \return none. +** +****************************************************************************************/ +void BootActivate(void) +{ + /* perform software reset to activate the bootoader again */ + NVIC_SystemReset(); +} /*** end of BootActivate ***/ + + +#if (BOOT_COM_UART_ENABLE > 0) +/**************************************************************************************** +* U N I V E R S A L A S Y N C H R O N O U S R X T X I N T E R F A C E +****************************************************************************************/ + +/**************************************************************************************** +* Macro definitions +****************************************************************************************/ +/** \brief Timeout time for the reception of a CTO packet. The timer is started upon + * reception of the first packet byte. + */ +#define UART_CTO_RX_PACKET_TIMEOUT_MS (100u) + + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +static unsigned char UartReceiveByte(unsigned char *data); + + +/************************************************************************************//** +** \brief Initializes the UART communication interface. +** \return none. +** +****************************************************************************************/ +static void BootComUartInit(void) +{ + GPIO_InitTypeDef GPIO_InitStruct; + USART_InitTypeDef USART_InitStruct; + + /* enable UART peripheral clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); + /* enable GPIO peripheral clock for transmitter and receiver pins */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE); + /* configure USART Tx as alternate function push-pull */ + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOA, &GPIO_InitStruct); + /* Configure USART Rx as alternate function input floating */ + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_InitStruct.GPIO_Pin = GPIO_Pin_3; + GPIO_Init(GPIOA, &GPIO_InitStruct); + /* configure UART communcation parameters */ + USART_InitStruct.USART_BaudRate = BOOT_COM_UART_BAUDRATE; + USART_InitStruct.USART_WordLength = USART_WordLength_8b; + USART_InitStruct.USART_StopBits = USART_StopBits_1; + USART_InitStruct.USART_Parity = USART_Parity_No; + USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_Init(USART2, &USART_InitStruct); + /* enable UART */ + USART_Cmd(USART2, ENABLE); +} /*** end of BootComUartInit ***/ + + +/************************************************************************************//** +** \brief Receives the CONNECT request from the host, which indicates that the +** bootloader should be activated and, if so, activates it. +** \return none. +** +****************************************************************************************/ +static void BootComUartCheckActivationRequest(void) +{ + static unsigned char xcpCtoReqPacket[BOOT_COM_UART_RX_MAX_DATA+1]; + static unsigned char xcpCtoRxLength; + static unsigned char xcpCtoRxInProgress = 0; + static unsigned long xcpCtoRxStartTime = 0; + + /* start of cto packet received? */ + if (xcpCtoRxInProgress == 0) + { + /* store the message length when received */ + if (UartReceiveByte(&xcpCtoReqPacket[0]) == 1) + { + /* check that the length has a valid value. it should not be 0 */ + if ( (xcpCtoReqPacket[0] > 0) && + (xcpCtoReqPacket[0] <= BOOT_COM_UART_RX_MAX_DATA) ) + { + /* store the start time */ + xcpCtoRxStartTime = TimerGet(); + /* indicate that a cto packet is being received */ + xcpCtoRxInProgress = 1; + /* reset packet data count */ + xcpCtoRxLength = 0; + } + } + } + else + { + /* store the next packet byte */ + if (UartReceiveByte(&xcpCtoReqPacket[xcpCtoRxLength+1]) == 1) + { + /* increment the packet data count */ + xcpCtoRxLength++; + + /* check to see if the entire packet was received */ + if (xcpCtoRxLength == xcpCtoReqPacket[0]) + { + /* done with cto packet reception */ + xcpCtoRxInProgress = 0; + + /* check if this was an XCP CONNECT command */ + if ((xcpCtoReqPacket[1] == 0xff) && (xcpCtoReqPacket[2] == 0x00)) + { + /* connection request received so start the bootloader */ + BootActivate(); + } + } + } + else + { + /* check packet reception timeout */ + if (TimerGet() > (xcpCtoRxStartTime + UART_CTO_RX_PACKET_TIMEOUT_MS)) + { + /* cancel cto packet reception due to timeout. note that this automatically + * discards the already received packet bytes, allowing the host to retry. + */ + xcpCtoRxInProgress = 0; + } + } + } +} /*** end of BootComUartCheckActivationRequest ***/ + + +/************************************************************************************//** +** \brief Receives a communication interface byte if one is present. +** \param data Pointer to byte where the data is to be stored. +** \return 1 if a byte was received, 0 otherwise. +** +****************************************************************************************/ +static unsigned char UartReceiveByte(unsigned char *data) +{ + /* check flag to see if a byte was received */ + if (USART_GetFlagStatus(USART2, USART_FLAG_RXNE) == SET) + { + /* retrieve and store the newly received byte */ + *data = (unsigned char)USART_ReceiveData(USART2); + /* all done */ + return 1; + } + /* still here to no new byte received */ + return 0; +} /*** end of UartReceiveByte ***/ +#endif /* BOOT_COM_UART_ENABLE > 0 */ + + +#if (BOOT_COM_CAN_ENABLE > 0) +/**************************************************************************************** +* C O N T R O L L E R A R E A N E T W O R K I N T E R F A C E +****************************************************************************************/ + +/**************************************************************************************** +* Type definitions +****************************************************************************************/ +/** \brief Structure type for grouping CAN bus timing related information. */ +typedef struct t_can_bus_timing +{ + unsigned char tseg1; /**< CAN time segment 1 */ + unsigned char tseg2; /**< CAN time segment 2 */ +} tCanBusTiming; + + +/**************************************************************************************** +* Local constant declarations +****************************************************************************************/ +/** \brief CAN bittiming table for dynamically calculating the bittiming settings. + * \details According to the CAN protocol 1 bit-time can be made up of between 8..25 + * time quanta (TQ). The total TQ in a bit is SYNC + TSEG1 + TSEG2 with SYNC + * always being 1. The sample point is (SYNC + TSEG1) / (SYNC + TSEG1 + SEG2) * + * 100%. This array contains possible and valid time quanta configurations with + * a sample point between 68..78%. + */ +static const tCanBusTiming canTiming[] = +{ /* TQ | TSEG1 | TSEG2 | SP */ + /* ------------------------- */ + { 5, 2 }, /* 8 | 5 | 2 | 75% */ + { 6, 2 }, /* 9 | 6 | 2 | 78% */ + { 6, 3 }, /* 10 | 6 | 3 | 70% */ + { 7, 3 }, /* 11 | 7 | 3 | 73% */ + { 8, 3 }, /* 12 | 8 | 3 | 75% */ + { 9, 3 }, /* 13 | 9 | 3 | 77% */ + { 9, 4 }, /* 14 | 9 | 4 | 71% */ + { 10, 4 }, /* 15 | 10 | 4 | 73% */ + { 11, 4 }, /* 16 | 11 | 4 | 75% */ + { 12, 4 }, /* 17 | 12 | 4 | 76% */ + { 12, 5 }, /* 18 | 12 | 5 | 72% */ + { 13, 5 }, /* 19 | 13 | 5 | 74% */ + { 14, 5 }, /* 20 | 14 | 5 | 75% */ + { 15, 5 }, /* 21 | 15 | 5 | 76% */ + { 15, 6 }, /* 22 | 15 | 6 | 73% */ + { 16, 6 }, /* 23 | 16 | 6 | 74% */ + { 16, 7 }, /* 24 | 16 | 7 | 71% */ + { 16, 8 } /* 25 | 16 | 8 | 68% */ +}; + + +/************************************************************************************//** +** \brief Search algorithm to match the desired baudrate to a possible bus +** timing configuration. +** \param baud The desired baudrate in kbps. Valid values are 10..1000. +** \param prescaler Pointer to where the value for the prescaler will be stored. +** \param tseg1 Pointer to where the value for TSEG2 will be stored. +** \param tseg2 Pointer to where the value for TSEG2 will be stored. +** \return 1 if the CAN bustiming register values were found, 0 otherwise. +** +****************************************************************************************/ +static unsigned char CanGetSpeedConfig(unsigned short baud, unsigned short *prescaler, + unsigned char *tseg1, unsigned char *tseg2) +{ + unsigned char cnt; + + /* loop through all possible time quanta configurations to find a match */ + for (cnt=0; cnt < sizeof(canTiming)/sizeof(canTiming[0]); cnt++) + { + if (((BOOT_CPU_SYSTEM_SPEED_KHZ/2) % (baud*(canTiming[cnt].tseg1+canTiming[cnt].tseg2+1))) == 0) + { + /* compute the prescaler that goes with this TQ configuration */ + *prescaler = (BOOT_CPU_SYSTEM_SPEED_KHZ/2)/(baud*(canTiming[cnt].tseg1+canTiming[cnt].tseg2+1)); + + /* make sure the prescaler is valid */ + if ( (*prescaler > 0) && (*prescaler <= 1024) ) + { + /* store the bustiming configuration */ + *tseg1 = canTiming[cnt].tseg1; + *tseg2 = canTiming[cnt].tseg2; + /* found a good bus timing configuration */ + return 1; + } + } + } + /* could not find a good bus timing configuration */ + return 0; +} /*** end of CanGetSpeedConfig ***/ + + +/************************************************************************************//** +** \brief Initializes the CAN communication interface. +** \return none. +** +****************************************************************************************/ +static void BootComCanInit(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + CAN_InitTypeDef CAN_InitStructure; + CAN_FilterInitTypeDef CAN_FilterInitStructure; + unsigned short prescaler; + unsigned char tseg1, tseg2; + + /* GPIO clock enable */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + /* Configure CAN pin: RX */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + /* Configure CAN pin: TX */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOB, &GPIO_InitStructure); + /* Remap CAN1 pins to PortB */ + GPIO_PinRemapConfig(GPIO_Remap1_CAN1 , ENABLE); + /* CAN1 Periph clock enable */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_CAN1, ENABLE); + /* CAN register init */ + CAN_DeInit(CAN1); + CAN_StructInit(&CAN_InitStructure); + /* obtain the bittiming configuration for this baudrate */ + CanGetSpeedConfig(BOOT_COM_CAN_BAUDRATE/1000, &prescaler, &tseg1, &tseg2); + /* CAN controller init */ + CAN_InitStructure.CAN_TTCM = DISABLE; + CAN_InitStructure.CAN_ABOM = DISABLE; + CAN_InitStructure.CAN_AWUM = DISABLE; + CAN_InitStructure.CAN_NART = DISABLE; + CAN_InitStructure.CAN_RFLM = DISABLE; + CAN_InitStructure.CAN_TXFP = DISABLE; + CAN_InitStructure.CAN_Mode = CAN_Mode_Normal; + /* CAN Baudrate init */ + CAN_InitStructure.CAN_SJW = CAN_SJW_1tq; + CAN_InitStructure.CAN_BS1 = tseg1 - 1; + CAN_InitStructure.CAN_BS2 = tseg2 - 1; + CAN_InitStructure.CAN_Prescaler = prescaler; + CAN_Init(CAN1, &CAN_InitStructure); + /* CAN filter init - receive all messages */ + CAN_FilterInitStructure.CAN_FilterNumber = 0; + CAN_FilterInitStructure.CAN_FilterMode = CAN_FilterMode_IdMask; + CAN_FilterInitStructure.CAN_FilterScale = CAN_FilterScale_32bit; + CAN_FilterInitStructure.CAN_FilterIdHigh = 0x0000; + CAN_FilterInitStructure.CAN_FilterIdLow = 0x0000; + CAN_FilterInitStructure.CAN_FilterMaskIdHigh = 0x0000; + CAN_FilterInitStructure.CAN_FilterMaskIdLow = 0x0000; + CAN_FilterInitStructure.CAN_FilterFIFOAssignment = 0; + CAN_FilterInitStructure.CAN_FilterActivation = ENABLE; + CAN_FilterInit(&CAN_FilterInitStructure); +} /*** end of BootCanComInit ***/ + + +/************************************************************************************//** +** \brief Receives the CONNECT request from the host, which indicates that the +** bootloader should be activated and, if so, activates it. +** \return none. +** +****************************************************************************************/ +static void BootComCanCheckActivationRequest(void) +{ + CanRxMsg RxMessage; + unsigned char canIdMatched = 0; + + /* check if a new message was received */ + if (CAN_MessagePending(CAN1, CAN_FIFO0) > 0) + { + /* receive the message */ + CAN_Receive(CAN1, CAN_FIFO0, &RxMessage); + /* check if the message identifier matches the bootloader reception message */ + if ( (RxMessage.IDE == CAN_Id_Standard) && + (RxMessage.StdId == BOOT_COM_CAN_RX_MSG_ID) ) + { + canIdMatched = 1; + } + if ( (RxMessage.IDE == CAN_Id_Extended) && + ((RxMessage.ExtId | 0x80000000) == BOOT_COM_CAN_RX_MSG_ID) ) + { + canIdMatched = 1; + } + /* is the identifier a match to the bootloader reception message identifier? */ + if (canIdMatched == 1) + { + /* check if this was an XCP CONNECT command */ + if ((RxMessage.Data[0] == 0xff) && (RxMessage.Data[1] == 0x00)) + { + /* connection request received so start the bootloader */ + BootActivate(); + } + } + } +} /*** end of BootComCanCheckActivationRequest ***/ +#endif /* BOOT_COM_CAN_ENABLE > 0 */ + + +/*********************************** end of boot.c *************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.h new file mode 100644 index 00000000..f6c37a95 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/boot.h @@ -0,0 +1,40 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\boot.h +* \brief Demo program bootloader interface header file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ +#ifndef BOOT_H +#define BOOT_H + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +void BootComInit(void); +void BootComCheckActivationRequest(void); +void BootActivate(void); + + +#endif /* BOOT_H */ +/*********************************** end of boot.h *************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/header.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/header.h new file mode 100644 index 00000000..6b9c17b4 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/header.h @@ -0,0 +1,43 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\header.h +* \brief Generic header file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ +#ifndef HEADER_H +#define HEADER_H + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "../Boot/blt_conf.h" /* bootloader configuration */ +#include "stm32f10x.h" /* STM32 register definitions */ +#include "stm32f10x_conf.h" /* STM32 peripheral drivers */ +#include "boot.h" /* bootloader interface driver */ +#include "led.h" /* LED driver */ +#include "timer.h" /* Timer driver */ + + +#endif /* HEADER_H */ +/*********************************** end of header.h ***********************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.c new file mode 100644 index 00000000..53567f8b --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.c @@ -0,0 +1,99 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\led.c +* \brief LED driver source file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "header.h" /* generic header */ + + +/**************************************************************************************** +* Macro definitions +****************************************************************************************/ +/** \brief Toggle interval time in milliseconds. */ +#define LED_TOGGLE_MS (500) + + +/************************************************************************************//** +** \brief Initializes the LED. +** \return none. +** +****************************************************************************************/ +void LedInit(void) +{ + GPIO_InitTypeDef gpio_init; + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE); + gpio_init.GPIO_Pin = GPIO_Pin_12; + gpio_init.GPIO_Speed = GPIO_Speed_50MHz; + gpio_init.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_Init(GPIOC, &gpio_init); + /* turn the LED off */ + GPIO_SetBits(GPIOC, GPIO_Pin_12); +} /*** end of LedInit ***/ + + +/************************************************************************************//** +** \brief Toggles the LED at a fixed time interval. +** \return none. +** +****************************************************************************************/ +void LedToggle(void) +{ + static unsigned char led_toggle_state = 0; + static unsigned long timer_counter_last = 0; + unsigned long timer_counter_now; + + /* check if toggle interval time passed */ + timer_counter_now = TimerGet(); + if ( (timer_counter_now - timer_counter_last) < LED_TOGGLE_MS) + { + /* not yet time to toggle */ + return; + } + + /* determine toggle action */ + if (led_toggle_state == 0) + { + led_toggle_state = 1; + /* turn the LED on */ + GPIO_ResetBits(GPIOC, GPIO_Pin_12); + } + else + { + led_toggle_state = 0; + /* turn the LED off */ + GPIO_SetBits(GPIOC, GPIO_Pin_12); + } + + /* store toggle time to determine next toggle interval */ + timer_counter_last = timer_counter_now; +} /*** end of LedToggle ***/ + + +/*********************************** end of led.c **************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.h new file mode 100644 index 00000000..e9b12ddf --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/led.h @@ -0,0 +1,39 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\led.h +* \brief LED driver header file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ +#ifndef LED_H +#define LED_H + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +void LedInit(void); +void LedToggle(void); + + +#endif /* LED_H */ +/*********************************** end of led.h **************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.c new file mode 100644 index 00000000..0e8c3c43 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.c @@ -0,0 +1,784 @@ +/**************************************************************************//** + * @file core_cm3.c + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +__ASM void __CLREX(void) +{ + clrex +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +__ASM uint32_t __get_BASEPRI(void) +{ + mrs r0, basepri + bx lr +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +__ASM void __set_BASEPRI(uint32_t basePri) +{ + msr basepri, r0 + bx lr +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +__ASM uint32_t __get_FAULTMASK(void) +{ + mrs r0, faultmask + bx lr +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +__ASM void __set_FAULTMASK(uint32_t faultMask) +{ + msr faultmask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + __ASM("rbit r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +uint8_t __LDREXB(uint8_t *addr) +{ + __ASM("ldrexb r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + __ASM("ldrexh r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + __ASM("ldrex r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + __ASM("strexb r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + __ASM("strexh r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + __ASM("strex r0, r0, [r1]"); + __ASM("bx lr"); +} + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +uint32_t __get_BASEPRI(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +uint32_t __get_FAULTMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +uint8_t __LDREXB(uint8_t *addr) +{ + uint8_t result=0; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + uint16_t result=0; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexb %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexh %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.h new file mode 100644 index 00000000..2b6b51a7 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/CoreSupport/core_cm3.h @@ -0,0 +1,1818 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CM3_CORE_H__ +#define __CM3_CORE_H__ + +/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - Error 10: \n + * register uint32_t __regBasePri __asm("basepri"); \n + * Error 10: Expecting ';' + * . + * - Error 530: \n + * return(__regBasePri); \n + * Warning 530: Symbol '__regBasePri' (line 264) not initialized + * . + * - Error 550: \n + * __regBasePri = (basePri & 0x1ff); \n + * Warning 550: Symbol '__regBasePri' (line 271) not accessed + * . + * - Error 754: \n + * uint32_t RESERVED0[24]; \n + * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced + * . + * - Error 750: \n + * #define __CM3_CORE_H__ \n + * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced + * . + * - Error 528: \n + * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n + * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced + * . + * - Error 751: \n + * } InterruptType_Type; \n + * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + +/*lint -save */ +/*lint -e10 */ +/*lint -e530 */ +/*lint -e550 */ +/*lint -e754 */ +/*lint -e750 */ +/*lint -e528 */ +/*lint -e751 */ + + +/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM3_NVIC */ + + +/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM3_SCB */ + + +/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM3_SysTick */ + + +/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM + memory mapped structure for Instrumentation Trace Macrocell (ITM) + @{ + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ + __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ + __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +/*@}*/ /* end of group CMSIS_CM3_ITM */ + + +/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type + memory mapped structure for Interrupt Type + @{ + */ +typedef struct +{ + uint32_t RESERVED0; + __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ +#else + uint32_t RESERVED1; +#endif +} InterruptType_Type; + +/* Interrupt Controller Type Register Definitions */ +#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ +#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ +#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ + +#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ +#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ + +#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ +#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ +/*@}*/ /* end of group CMSIS_CM3_InterruptType */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) +/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU + memory mapped structure for Memory Protection Unit (MPU) + @{ + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ +#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ +#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ +#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ +#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ +#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ +#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@}*/ /* end of group CMSIS_CM3_MPU */ +#endif + + +/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ + + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev +#define __RBIT __rbit +#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) +#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) +#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) +#define __STREXB(value, ptr) __strex(value, ptr) +#define __STREXH(value, ptr) __strex(value, ptr) +#define __STREXW(value, ptr) __strex(value, ptr) + + +/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ +/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +extern void __CLREX(void); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +#define __CLREX __clrex + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & 1); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } +static __INLINE void __CLREX() { __ASM ("clrex"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ +/* intrinsic void __set_FAULTMASK(); */ +/* intrinsic void __get_FAULTMASK(); */ +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ +/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ +/* intrinsic unsigned long __LDREX(unsigned long *); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP() { __ASM volatile ("nop"); } +static __INLINE void __WFI() { __ASM volatile ("wfi"); } +static __INLINE void __WFE() { __ASM volatile ("wfe"); } +static __INLINE void __SEV() { __ASM volatile ("sev"); } +static __INLINE void __ISB() { __ASM volatile ("isb"); } +static __INLINE void __DSB() { __ASM volatile ("dsb"); } +static __INLINE void __DMB() { __ASM volatile ("dmb"); } +static __INLINE void __CLREX() { __ASM volatile ("clrex"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/** + * @brief Set the Priority Grouping in NVIC Interrupt Controller + * + * @param PriorityGroup is priority grouping field + * + * Set the priority grouping field using the required unlock sequence. + * The parameter priority_grouping is assigned to the field + * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + (0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + +/** + * @brief Get the Priority Grouping from NVIC Interrupt Controller + * + * @return priority grouping field + * + * Get the priority grouping from NVIC Interrupt Controller. + * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Read the active bit for an external interrupt + * + * @param IRQn The number of the interrupt for read active bit + * @return 1 = interrupt active, 0 = interrupt not active + * + * Read the active register in NVIC and returns 1 if its status is active, + * otherwise it returns 0. + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** + * @brief Encode the priority for an interrupt + * + * @param PriorityGroup The used priority group + * @param PreemptPriority The preemptive priority value (starting from 0) + * @param SubPriority The sub priority value (starting from 0) + * @return The encoded priority for the interrupt + * + * Encode the priority for an interrupt with the given priority group, + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The returned priority value can be used for NVIC_SetPriority(...) function + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** + * @brief Decode the priority of an interrupt + * + * @param Priority The priority for the interrupt + * @param PriorityGroup The used priority group + * @param pPreemptPriority The preemptive priority value (starting from 0) + * @param pSubPriority The sub priority value (starting from 0) + * + * Decode an interrupt priority value with the given priority group to + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The priority value can be retrieved with NVIC_GetPriority(...) function + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ + + + +/* ##################################### Debug In/Output function ########################################### */ + +/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface + Core Debug Interface containing: + - Core Debug Receive / Transmit Functions + - Core Debug Defines + - Core Debug Variables +*/ +/*@{*/ + +extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** + * @brief Outputs a character via the ITM channel 0 + * + * @param ch character to output + * @return character to output + * + * The function outputs a character via the ITM channel 0. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** + * @brief Inputs a character via variable ITM_RxBuffer + * + * @return received character, -1 = no character received + * + * The function inputs a character via variable ITM_RxBuffer. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE int ITM_ReceiveChar (void) { + int ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + * @brief Check if a character via variable ITM_RxBuffer is available + * + * @return 1 = character available, 0 = no character available + * + * The function checks variable ITM_RxBuffer whether a character is available or not. + * The function returns '1' if a character is available and '0' if no character is available. + */ +static __INLINE int ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ + + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_definitions */ + +#endif /* __CM3_CORE_H__ */ + +/*lint -restore */ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html new file mode 100644 index 00000000..b80f38df --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html @@ -0,0 +1,284 @@ + + + + + + + + + + + + +Release Notes for STM32F10x CMSIS + + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F10x CMSIS

+

Copyright 2011 STMicroelectronics

+

+
+

 

+ + + + + + +
+

Contents

+
    +
  1. STM32F10x CMSIS +update History
    2. +
  2. License
    3. +
+ +

STM32F10x CMSIS +update History


+

V3.5.0 / 11-March-2011

+

Main +Changes

+ +
    +
  • stm32f10x.h +and startup_stm32f10x_hd_vl.s files: remove the FSMC interrupt +definition for STM32F10x High-density Value line devices.
    +
    • +
  • system_stm32f10x.c file provided within the CMSIS folder.
    +
    • + +
+ +

3.4.0 +- 10/15/2010

+ +
    +
  1. General
    2. +
+ +
    +
  • Add support +for STM32F10x High-density Value line devices.
    • +
+
    +
  1. STM32F10x CMSIS Device Peripheral Access Layer
    2. +
+ + + +
    +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • Update to support High-density Value line devices
      • Add new define STM32F10X_HD_VL
        • +
      • RCC, AFIO, FSMC bits definition updated
        • +
      +
    • + + All +STM32 devices definitions are commented by default. User has to select the +appropriate device before starting else an error will be signaled on compile +time.
      • +
    • Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.
      • +
    • "bool" type removed.
      +
      • +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • +
      +
    • "system_stm32f10x.c" moved to to "STM32F10x_StdPeriph_Template" directory. This file is also moved to each example directory under "STM32F10x_StdPeriph_Examples".
      +
      • +
    • SystemInit_ExtMemCtl() function: update to support High-density Value line devices.
      • +
    • Add "VECT_TAB_SRAM" inside "system_stm32f10x.c" +to select if the user want to place the Vector Table in internal SRAM. +An additional define is also to specify the Vector Table offset "VECT_TAB_OFFSET".
      +
      • + +
    +
  • STM32F10x CMSIS startup files:startup_stm32f10x_xx.s
    • Add three +startup files for STM32 High-density Value line devices: + startup_stm32f10x_hd_vl.s
    +
+

3.3.0 +- 04/16/2010

+ +
  1. General
+
  • Add support +for STM32F10x XL-density devices.
  • Add startup files for TrueSTUDIO toolchain
  1. STM32F10x CMSIS Device Peripheral Access Layer
+ +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • Update to support XL-density devices
      • Add new define STM32F10X_XL
      • Add new IRQs for TIM9..14
      • Update FLASH_TypeDef structure
      • Add new IP instances TIM9..14
      • RCC, AFIO, DBGMCU bits definition updated
    • Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma "," at the end of enum list)
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • SystemInit_ExtMemCtl() function: update to support XL-density devices
    • SystemInit() function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions. 
      +
  • STM32F10x CMSIS startup files:
    • add three +startup files for STM32 XL-density devices: + startup_stm32f10x_xl.s
    • startup_stm32f10x_md_vl.s for RIDE7: add USART3 IRQ Handler (was missing in previous version)
    • Add startup files for TrueSTUDIO toolchain
+

3.2.0 +- 03/01/2010

+
    +
  1. General
    2. +
+
    + +
  • STM32F10x CMSIS files updated to CMSIS V1.30 release
    • +
  • Directory structure updated to be aligned with CMSIS V1.30
    +
    • +
  • Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices. 
    • + +
+
    +
  1. CMSIS Core Peripheral Access Layer
+ +
    +
  1. STM32F10x CMSIS Device Peripheral Access Layer
    2. + +
+ +
    + +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File: stm32f10x.h
    +
    • +
      +
    • Update +the stm32f10x.h file to support new Value line devices features: CEC +peripheral, new General purpose timers TIM15, TIM16 and TIM17.
      • +
    • Peripherals Bits definitions updated to be in line with Value line devices available features.
      +
      • +
    • HSE_Value, +HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE, +HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy +purposes.
      +
      • +
    +
  • STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files: system_stm32f10x.h and system_stm32f10x.c
    +
    • +
      +
    • SystemFrequency variable name changed to SystemCoreClock
      +
      • +
    • Default + SystemCoreClock is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.
      +
      • +
    • All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.
      +
      • +
    • Additional function void SystemCoreClockUpdate (void) is provided.
      +
      • +
    +
  • STM32F10x CMSIS Startup files: startup_stm32f10x_xx.s
    • +
      +
    • Add new +startup files for STM32 Low-density Value line devices: + startup_stm32f10x_ld_vl.s
      • +
    • Add new startup +files for STM32 Medium-density Value line devices: + startup_stm32f10x_md_vl.s
      • +
    • SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.
      +To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file
      +
      • +
    • GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.
      +
      • +
    + +
+ +
    +
+

License

+

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

+

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

+

 

+
+
+

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h new file mode 100644 index 00000000..af0c7c9a --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h @@ -0,0 +1,8336 @@ +/** + ****************************************************************************** + * @file stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F10x Connectivity line, + * High density, High density value line, Medium density, + * Medium density Value line, Low density, Low density Value line + * and XL-density devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x + * @{ + */ + +#ifndef __STM32F10x_H +#define __STM32F10x_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ + /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ + /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ + /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ + /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ + /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */ + /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ + /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ +#endif +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 16 and 32 Kbytes. + - Low-density value line devices are STM32F100xx microcontrollers where the Flash + memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" +#endif + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined HSE_VALUE + #ifdef STM32F10X_CL + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #else + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* STM32F10X_CL */ +#endif /* HSE_VALUE */ + + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ + +#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ + +/** + * @brief STM32F10x Standard Peripheral Library version number + */ +#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F10X_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#ifdef STM32F10X_XL + #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ +#else + #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ +#endif /* STM32F10X_XL */ +#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + +#ifdef STM32F10X_LD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_LD */ + +#ifdef STM32F10X_LD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_LD_VL */ + +#ifdef STM32F10X_MD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_MD */ + +#ifdef STM32F10X_MD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_MD_VL */ + +#ifdef STM32F10X_HD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ + DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is + mapped at position 60 only if the MISC_REMAP bit in + the AFIO_MAPR2 register is set) */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_XL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_XL */ + +#ifdef STM32F10X_CL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +#endif /* STM32F10X_CL */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f10x.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */ +#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT +#define HSE_Value HSE_VALUE +#define HSI_Value HSI_VALUE +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DR1; + uint16_t RESERVED1; + __IO uint16_t DR2; + uint16_t RESERVED2; + __IO uint16_t DR3; + uint16_t RESERVED3; + __IO uint16_t DR4; + uint16_t RESERVED4; + __IO uint16_t DR5; + uint16_t RESERVED5; + __IO uint16_t DR6; + uint16_t RESERVED6; + __IO uint16_t DR7; + uint16_t RESERVED7; + __IO uint16_t DR8; + uint16_t RESERVED8; + __IO uint16_t DR9; + uint16_t RESERVED9; + __IO uint16_t DR10; + uint16_t RESERVED10; + __IO uint16_t RTCCR; + uint16_t RESERVED11; + __IO uint16_t CR; + uint16_t RESERVED12; + __IO uint16_t CSR; + uint16_t RESERVED13[5]; + __IO uint16_t DR11; + uint16_t RESERVED14; + __IO uint16_t DR12; + uint16_t RESERVED15; + __IO uint16_t DR13; + uint16_t RESERVED16; + __IO uint16_t DR14; + uint16_t RESERVED17; + __IO uint16_t DR15; + uint16_t RESERVED18; + __IO uint16_t DR16; + uint16_t RESERVED19; + __IO uint16_t DR17; + uint16_t RESERVED20; + __IO uint16_t DR18; + uint16_t RESERVED21; + __IO uint16_t DR19; + uint16_t RESERVED22; + __IO uint16_t DR20; + uint16_t RESERVED23; + __IO uint16_t DR21; + uint16_t RESERVED24; + __IO uint16_t DR22; + uint16_t RESERVED25; + __IO uint16_t DR23; + uint16_t RESERVED26; + __IO uint16_t DR24; + uint16_t RESERVED27; + __IO uint16_t DR25; + uint16_t RESERVED28; + __IO uint16_t DR26; + uint16_t RESERVED29; + __IO uint16_t DR27; + uint16_t RESERVED30; + __IO uint16_t DR28; + uint16_t RESERVED31; + __IO uint16_t DR29; + uint16_t RESERVED32; + __IO uint16_t DR30; + uint16_t RESERVED33; + __IO uint16_t DR31; + uint16_t RESERVED34; + __IO uint16_t DR32; + uint16_t RESERVED35; + __IO uint16_t DR33; + uint16_t RESERVED36; + __IO uint16_t DR34; + uint16_t RESERVED37; + __IO uint16_t DR35; + uint16_t RESERVED38; + __IO uint16_t DR36; + uint16_t RESERVED39; + __IO uint16_t DR37; + uint16_t RESERVED40; + __IO uint16_t DR38; + uint16_t RESERVED41; + __IO uint16_t DR39; + uint16_t RESERVED42; + __IO uint16_t DR40; + uint16_t RESERVED43; + __IO uint16_t DR41; + uint16_t RESERVED44; + __IO uint16_t DR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; +#ifndef STM32F10X_CL + CAN_FilterRegister_TypeDef sFilterRegister[14]; +#else + CAN_FilterRegister_TypeDef sFilterRegister[28]; +#endif /* STM32F10X_CL */ +} CAN_TypeDef; + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; + __IO uint8_t IDR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CR; +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + __IO uint32_t SR; +#endif +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +#ifdef STM32F10X_XL + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +#endif /* STM32F10X_XL */ +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; + __IO uint32_t SR2; + __IO uint32_t PMEM2; + __IO uint32_t PATT2; + uint32_t RESERVED0; + __IO uint32_t ECCR2; +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; + __IO uint32_t SR3; + __IO uint32_t PMEM3; + __IO uint32_t PATT3; + uint32_t RESERVED0; + __IO uint32_t ECCR3; +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t OAR1; + uint16_t RESERVED2; + __IO uint16_t OAR2; + uint16_t RESERVED3; + __IO uint16_t DR; + uint16_t RESERVED4; + __IO uint16_t SR1; + uint16_t RESERVED5; + __IO uint16_t SR2; + uint16_t RESERVED6; + __IO uint16_t CCR; + uint16_t RESERVED7; + __IO uint16_t TRISE; + uint16_t RESERVED8; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; + __IO uint32_t PR; + __IO uint32_t RLR; + __IO uint32_t SR; +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + +#ifdef STM32F10X_CL + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t RESERVED0; + __IO uint32_t CFGR2; +#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint16_t CRH; + uint16_t RESERVED0; + __IO uint16_t CRL; + uint16_t RESERVED1; + __IO uint16_t PRLH; + uint16_t RESERVED2; + __IO uint16_t PRLL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRH; + uint16_t RESERVED8; + __IO uint16_t ALRL; + uint16_t RESERVED9; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SR; + uint16_t RESERVED2; + __IO uint16_t DR; + uint16_t RESERVED3; + __IO uint16_t CRCPR; + uint16_t RESERVED4; + __IO uint16_t RXCRCR; + uint16_t RESERVED5; + __IO uint16_t TXCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SMCR; + uint16_t RESERVED2; + __IO uint16_t DIER; + uint16_t RESERVED3; + __IO uint16_t SR; + uint16_t RESERVED4; + __IO uint16_t EGR; + uint16_t RESERVED5; + __IO uint16_t CCMR1; + uint16_t RESERVED6; + __IO uint16_t CCMR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + __IO uint16_t CNT; + uint16_t RESERVED9; + __IO uint16_t PSC; + uint16_t RESERVED10; + __IO uint16_t ARR; + uint16_t RESERVED11; + __IO uint16_t RCR; + uint16_t RESERVED12; + __IO uint16_t CCR1; + uint16_t RESERVED13; + __IO uint16_t CCR2; + uint16_t RESERVED14; + __IO uint16_t CCR3; + uint16_t RESERVED15; + __IO uint16_t CCR4; + uint16_t RESERVED16; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DCR; + uint16_t RESERVED18; + __IO uint16_t DMAR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; + uint16_t RESERVED0; + __IO uint16_t DR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CR1; + uint16_t RESERVED3; + __IO uint16_t CR2; + uint16_t RESERVED4; + __IO uint16_t CR3; + uint16_t RESERVED5; + __IO uint16_t GTPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFR; + __IO uint32_t SR; +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ + +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define CEC_BASE (APB1PERIPH_BASE + 0x7800) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00) +#define TIM10_BASE (APB2PERIPH_BASE + 0x5000) +#define TIM11_BASE (APB2PERIPH_BASE + 0x5400) + +#define SDIO_BASE (PERIPH_BASE + 0x18000) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ +#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define BKP ((BKP_TypeDef *) BKP_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define AFIO ((AFIO_TypeDef *) AFIO_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ + + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ +#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ +#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ +#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ +#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ +#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ +#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ +#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ + +#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ +#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ +#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ +#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ +#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ + +#ifdef STM32F10X_CL + #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ + #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ + #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ + #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +#ifdef STM32F10X_CL + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ + #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ + + #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ + #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ + #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ + #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#else + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#endif /* STM32F10X_CL */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +#ifdef STM32F10X_CL + #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ + #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ + #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ + #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ + #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ + #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ +#endif /* STM32F10X_CL */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */ +#endif + +#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ + #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */ + #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */ + #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */ + #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */ +#endif /* STM32F10X_XL */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ +#endif + +#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ + #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ + #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ + #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ + #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ +#endif /* STM32F10X_XL */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL) + #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ + #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ +#endif + +#ifdef STM32F10X_CL + #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ + #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ + #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ + #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */ +#endif + +#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ + #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */ + #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */ + #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */ + #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */ +#endif + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ +#endif + +#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ + #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ + #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ + #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ + #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */ +#endif + +#ifdef STM32F10X_HD_VL + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_CL + #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ +#endif /* STM32F10X_XL */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ +#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +#ifdef STM32F10X_CL +/******************* Bit definition for RCC_AHBRSTR register ****************/ + #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ + #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ + #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ + #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ + #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ + #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ + #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ + #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ + #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ + #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ + #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ + #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ + #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ + #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ + #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ + #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ + #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ + #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ + #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ + #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ + #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ + #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ + #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ + #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ + #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ + #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ + #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ + + #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ + #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ +#endif + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ +#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ +#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ +#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ + +#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ + +#ifdef STM32F10X_CL +/*!< ETH_REMAP configuration */ + #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ + #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ + #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ + #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ + #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ + #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ +#endif + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */ +#endif + +#ifdef STM32F10X_HD_VL +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */ +#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */ +#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */ +#endif + +#ifdef STM32F10X_XL +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#endif + +/******************************************************************************/ +/* */ +/* SystemTick */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR1 register *******************/ +#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ +#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR2 register *******************/ +#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR3 register *******************/ +#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/*!<****************** Bit definition for DMA_CCR4 register *******************/ +#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CCR5 register *******************/ +#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/******************* Bit definition for DMA_CCR6 register *******************/ +#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR7 register *******************/ +#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR7_PSIZE , ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/****************** Bit definition for DMA_CNDTR1 register ******************/ +#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR2 register ******************/ +#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR3 register ******************/ +#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR4 register ******************/ +#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR5 register ******************/ +#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR6 register ******************/ +#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR7 register ******************/ +#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR1 register *******************/ +#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR2 register *******************/ +#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR3 register *******************/ +#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR4 register *******************/ +#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR5 register *******************/ +#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR6 register *******************/ +#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR7 register *******************/ +#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR1 register *******************/ +#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR2 register *******************/ +#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR3 register *******************/ +#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + + +/****************** Bit definition for DMA_CMAR4 register *******************/ +#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR5 register *******************/ +#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR6 register *******************/ +#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR7 register *******************/ +#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */ +#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */ +#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */ +#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */ +#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */ + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ +#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ +#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ +#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ +#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ +#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ +#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ +#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ + +#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */ +#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ +#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ + + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ +#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ +#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */ +#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */ +#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ +#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ + +#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */ +#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */ + +#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ +#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */ +#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */ +#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */ +#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */ +#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ +#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ +#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */ + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */ +#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */ +#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */ + +#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */ +#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */ +#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */ +#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */ +#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */ +#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */ +#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */ +#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */ +#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */ +#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */ +#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */ +#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */ +#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */ +#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */ + +#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */ + +#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */ + +#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */ +#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */ + +#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */ + +#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */ + +#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */ +#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */ +#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */ +#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */ +#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */ +#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */ +#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */ +#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */ +#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */ +#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */ +#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */ +#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */ +#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */ +#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */ +#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */ +#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */ + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */ + +#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */ +#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */ +#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */ +#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */ +#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */ + +#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */ +#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */ + +/******************************************************************************/ +/* */ +/* Real-Time Clock */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for RTC_CRH register ********************/ +#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */ +#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */ +#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */ + +/******************* Bit definition for RTC_CRL register ********************/ +#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */ +#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */ +#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */ +#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */ +#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */ +#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */ + +/******************* Bit definition for RTC_PRLH register *******************/ +#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */ + +/******************* Bit definition for RTC_PRLL register *******************/ +#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */ + +/******************* Bit definition for RTC_DIVH register *******************/ +#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */ + +/******************* Bit definition for RTC_DIVL register *******************/ +#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */ + +/******************* Bit definition for RTC_CNTH register *******************/ +#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */ + +/******************* Bit definition for RTC_CNTL register *******************/ +#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */ + +/******************* Bit definition for RTC_ALRH register *******************/ +#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */ + +/******************* Bit definition for RTC_ALRL register *******************/ +#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */ +#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */ +#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */ +#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */ +#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */ +#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */ +#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */ + +#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */ +#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */ + +#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Flexible Static Memory Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for FSMC_BCR1 register *******************/ +#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR2 register *******************/ +#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR3 register *******************/ +#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */ +#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR4 register *******************/ +#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BTR1 register ******************/ +#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR2 register *******************/ +#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/******************* Bit definition for FSMC_BTR3 register *******************/ +#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR4 register *******************/ +#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR1 register ******************/ +#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR2 register ******************/ +#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/ +#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR3 register ******************/ +#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR4 register ******************/ +#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_PCR2 register *******************/ +#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */ +#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR3 register *******************/ +#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR4 register *******************/ +#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/******************* Bit definition for FSMC_SR2 register *******************/ +#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR3 register *******************/ +#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR4 register *******************/ +#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/****************** Bit definition for FSMC_PMEM2 register ******************/ +#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */ +#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */ +#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */ +#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ +#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM3 register ******************/ +#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */ +#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */ +#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */ +#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ +#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM4 register ******************/ +#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */ +#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */ +#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */ +#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ +#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT2 register ******************/ +#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */ +#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ +#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ +#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ +#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT3 register ******************/ +#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */ +#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ +#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ +#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ +#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT4 register ******************/ +#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */ +#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ +#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ +#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ +#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PIO4 register *******************/ +#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */ +#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */ +#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */ +#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ +#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_ECCR2 register ******************/ +#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/****************** Bit definition for FSMC_ECCR3 register ******************/ +#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/******************************************************************************/ +/* */ +/* SD host Interface */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for SDIO_POWER register ******************/ +#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */ +#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */ + +/****************** Bit definition for SDIO_CLKCR register ******************/ +#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */ +#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */ +#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */ +#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */ + +#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ +#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */ +#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */ + +#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */ +#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */ + +/******************* Bit definition for SDIO_ARG register *******************/ +#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */ + +/******************* Bit definition for SDIO_CMD register *******************/ +#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */ + +#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */ +#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */ +#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */ + +#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */ +#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ +#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */ +#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */ +#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */ +#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */ +#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */ + +/***************** Bit definition for SDIO_RESPCMD register *****************/ +#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */ + +/****************** Bit definition for SDIO_RESP0 register ******************/ +#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP1 register ******************/ +#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP2 register ******************/ +#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP3 register ******************/ +#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP4 register ******************/ +#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_DTIMER register *****************/ +#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */ + +/****************** Bit definition for SDIO_DLEN register *******************/ +#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */ + +/****************** Bit definition for SDIO_DCTRL register ******************/ +#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */ +#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */ +#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */ +#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */ + +#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */ +#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */ +#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */ +#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */ +#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */ + +/****************** Bit definition for SDIO_DCOUNT register *****************/ +#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */ + +/****************** Bit definition for SDIO_STA register ********************/ +#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */ +#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */ +#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */ +#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */ +#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */ +#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */ +#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */ +#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */ +#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */ +#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */ +#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */ +#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */ +#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */ +#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */ +#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ +#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ +#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */ +#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */ +#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */ +#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */ +#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */ +#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */ +#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */ +#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */ + +/******************* Bit definition for SDIO_ICR register *******************/ +#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */ +#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */ +#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */ +#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */ +#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */ +#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */ +#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */ +#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */ +#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */ +#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */ +#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */ +#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */ +#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */ + +/****************** Bit definition for SDIO_MASK register *******************/ +#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */ +#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */ +#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */ +#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */ +#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */ +#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */ +#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */ +#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */ +#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */ +#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */ +#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */ +#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */ +#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */ +#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */ +#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */ +#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */ +#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */ +#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */ +#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */ +#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */ +#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */ +#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */ + +/***************** Bit definition for SDIO_FIFOCNT register *****************/ +#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */ + +/****************** Bit definition for SDIO_FIFO register *******************/ +#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */ + +/******************************************************************************/ +/* */ +/* USB Device FS */ +/* */ +/******************************************************************************/ + +/*!< Endpoint-specific registers */ +/******************* Bit definition for USB_EP0R register *******************/ +#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP1R register *******************/ +#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP2R register *******************/ +#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP3R register *******************/ +#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP4R register *******************/ +#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP5R register *******************/ +#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP6R register *******************/ +#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP7R register *******************/ +#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/*!< Common registers */ +/******************* Bit definition for USB_CNTR register *******************/ +#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */ +#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */ +#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */ +#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */ +#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */ +#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */ + +/******************* Bit definition for USB_ISTR register *******************/ +#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */ +#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */ +#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */ +#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */ +#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */ +#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */ +#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */ +#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */ +#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */ + +/******************* Bit definition for USB_FNR register ********************/ +#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */ +#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */ +#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */ +#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */ +#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */ + +/****************** Bit definition for USB_DADDR register *******************/ +#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */ +#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */ +#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */ +#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */ +#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */ +#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */ +#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */ +#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */ + +/****************** Bit definition for USB_BTABLE register ******************/ +#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */ + +/*!< Buffer descriptor table */ +/***************** Bit definition for USB_ADDR0_TX register *****************/ +#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_TX register *****************/ +#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_TX register *****************/ +#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_TX register *****************/ +#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_TX register *****************/ +#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_TX register *****************/ +#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_TX register *****************/ +#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_TX register *****************/ +#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_TX register ****************/ +#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */ + +/***************** Bit definition for USB_COUNT1_TX register ****************/ +#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */ + +/***************** Bit definition for USB_COUNT2_TX register ****************/ +#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */ + +/***************** Bit definition for USB_COUNT3_TX register ****************/ +#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */ + +/***************** Bit definition for USB_COUNT4_TX register ****************/ +#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */ + +/***************** Bit definition for USB_COUNT5_TX register ****************/ +#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */ + +/***************** Bit definition for USB_COUNT6_TX register ****************/ +#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */ + +/***************** Bit definition for USB_COUNT7_TX register ****************/ +#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ +#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ + +/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ +#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ + +/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ +#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ + +/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ +#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ + +/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ +#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ + +/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ +#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ + +/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ +#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ + +/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ +#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ + +/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ +#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ + +/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ +#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ + +/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ +#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ + +/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ +#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ + +/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ +#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ + +/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ +#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ + +/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ +#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ + +/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ +#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_ADDR0_RX register *****************/ +#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_RX register *****************/ +#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_RX register *****************/ +#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_RX register *****************/ +#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_RX register *****************/ +#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_RX register *****************/ +#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_RX register *****************/ +#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_RX register *****************/ +#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_RX register ****************/ +#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT1_RX register ****************/ +#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT2_RX register ****************/ +#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT3_RX register ****************/ +#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT4_RX register ****************/ +#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT5_RX register ****************/ +#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT6_RX register ****************/ +#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT7_RX register ****************/ +#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ +#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ +#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ +#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ +#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ +#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ +#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ +#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ +#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ +#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ +#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ +#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ +#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ +#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ +#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ +#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ +#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ + +/*!< CAN control and status registers */ +/******************* Bit definition for CAN_MCR register ********************/ +#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */ +#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */ +#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */ +#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */ +#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */ +#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */ +#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */ +#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */ +#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */ + +/******************* Bit definition for CAN_MSR register ********************/ +#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */ +#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */ +#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */ +#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */ +#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */ +#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */ +#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */ +#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */ +#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */ + +/******************* Bit definition for CAN_TSR register ********************/ +#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */ +#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */ +#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */ +#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */ +#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */ +#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */ +#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */ +#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */ +#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */ +#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */ +#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */ +#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */ +#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */ +#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */ +#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */ +#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */ + +#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */ +#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */ +#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */ +#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */ + +#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */ +#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */ + +/******************* Bit definition for CAN_RF0R register *******************/ +#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */ +#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */ +#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */ +#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */ + +/******************* Bit definition for CAN_RF1R register *******************/ +#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */ +#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */ +#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */ +#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */ + +/******************** Bit definition for CAN_IER register *******************/ +#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */ +#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */ +#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */ +#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */ +#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */ +#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */ +#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */ +#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */ + +/******************** Bit definition for CAN_ESR register *******************/ +#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */ +#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */ +#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ + +#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */ +#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */ +#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */ + +/******************* Bit definition for CAN_BTR register ********************/ +#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */ +#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */ +#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */ +#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */ +#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */ +#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */ + +/*!< Mailbox registers */ +/****************** Bit definition for CAN_TI0R register ********************/ +#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/****************** Bit definition for CAN_TDT0R register *******************/ +#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/****************** Bit definition for CAN_TDL0R register *******************/ +#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/****************** Bit definition for CAN_TDH0R register *******************/ +#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI1R register *******************/ +#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT1R register ******************/ +#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL1R register ******************/ +#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH1R register ******************/ +#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI2R register *******************/ +#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT2R register ******************/ +#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL2R register ******************/ +#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH2R register ******************/ +#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI0R register *******************/ +#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT0R register ******************/ +#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL0R register ******************/ +#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH0R register ******************/ +#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI1R register *******************/ +#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT1R register ******************/ +#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL1R register ******************/ +#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH1R register ******************/ +#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/*!< CAN filter registers */ +/******************* Bit definition for CAN_FMR register ********************/ +#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */ + +/******************* Bit definition for CAN_FM1R register *******************/ +#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */ +#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */ +#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */ +#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */ +#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */ +#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */ +#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */ +#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */ +#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */ +#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */ +#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */ +#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */ +#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */ +#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */ +#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */ + +/******************* Bit definition for CAN_FS1R register *******************/ +#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */ +#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */ +#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */ +#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */ +#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */ +#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */ +#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */ +#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */ +#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */ +#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */ +#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */ +#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */ +#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */ +#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */ +#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */ + +/****************** Bit definition for CAN_FFA1R register *******************/ +#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */ +#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */ +#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */ +#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */ +#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */ +#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */ +#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */ +#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */ +#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */ +#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */ +#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */ +#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */ +#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */ +#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */ +#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */ + +/******************* Bit definition for CAN_FA1R register *******************/ +#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */ +#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */ +#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */ +#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */ +#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */ +#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */ +#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */ +#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */ +#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */ +#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */ +#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */ +#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */ +#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */ +#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */ +#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */ + +/******************* Bit definition for CAN_F0R1 register *******************/ +#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R1 register *******************/ +#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R1 register *******************/ +#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R1 register *******************/ +#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R1 register *******************/ +#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R1 register *******************/ +#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R1 register *******************/ +#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R1 register *******************/ +#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R1 register *******************/ +#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R1 register *******************/ +#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R1 register ******************/ +#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R1 register ******************/ +#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R1 register ******************/ +#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R1 register ******************/ +#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F0R2 register *******************/ +#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R2 register *******************/ +#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R2 register *******************/ +#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R2 register *******************/ +#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R2 register *******************/ +#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R2 register *******************/ +#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R2 register *******************/ +#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R2 register *******************/ +#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R2 register *******************/ +#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R2 register *******************/ +#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R2 register ******************/ +#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R2 register ******************/ +#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R2 register ******************/ +#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R2 register ******************/ +#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */ +#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */ +#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */ + +#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */ +#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */ +#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */ + +#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */ +#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */ +#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */ +#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */ +#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */ +#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */ +#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */ +#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */ +#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */ +#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */ +#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */ +#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */ +#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */ +#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */ +#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CR1 register ********************/ +#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */ +#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */ +#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */ +#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */ +#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */ +#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */ +#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */ +#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */ +#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */ +#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */ +#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */ +#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */ +#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */ + +/******************* Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */ + +#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */ +#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */ +#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */ +#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */ +#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */ + +/******************* Bit definition for I2C_OAR1 register *******************/ +#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */ +#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */ + +#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */ +#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */ +#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */ + +#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OAR2 register *******************/ +#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */ +#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */ + +/******************** Bit definition for I2C_DR register ********************/ +#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */ + +/******************* Bit definition for I2C_SR1 register ********************/ +#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */ +#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */ +#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */ +#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */ +#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */ +#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */ +#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */ +#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */ +#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */ +#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */ +#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */ +#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */ +#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */ +#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */ + +/******************* Bit definition for I2C_SR2 register ********************/ +#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */ +#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */ +#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */ +#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */ +#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */ +#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */ +#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */ +#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */ + +/******************* Bit definition for I2C_CCR register ********************/ +#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */ +#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */ + +/****************** Bit definition for I2C_TRISE register *******************/ +#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for USART_SR register *******************/ +#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */ +#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */ +#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */ +#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */ +#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */ +#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */ +#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */ +#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */ +#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */ +#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */ + +/******************* Bit definition for USART_DR register *******************/ +#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */ +#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */ +#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */ +#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */ +#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */ +#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */ +#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */ +#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */ +#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */ +#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */ +#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */ +#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */ +#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */ +#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */ +#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */ +#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */ + +#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */ +#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */ +#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */ +#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */ +#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */ +#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */ +#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */ +#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/**************** Bit definition for DBGMCU_IDCODE register *****************/ +#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ + +#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ +#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/****************** Bit definition for DBGMCU_CR register *******************/ +#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ +#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ +#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ +#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ + +#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ +#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */ + +/******************************************************************************/ +/* */ +/* FLASH and Option Bytes Registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACR register ******************/ +#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */ +#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */ + +#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */ +#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */ +#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */ + +/****************** Bit definition for FLASH_KEYR register ******************/ +#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */ + +/***************** Bit definition for FLASH_OPTKEYR register ****************/ +#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */ + +/****************** Bit definition for FLASH_SR register *******************/ +#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */ +#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */ +#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */ +#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */ + +/******************* Bit definition for FLASH_CR register *******************/ +#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */ +#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */ +#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */ +#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */ +#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */ +#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */ +#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */ +#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */ +#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */ +#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */ + +/******************* Bit definition for FLASH_AR register *******************/ +#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */ +#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */ + +#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */ +#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */ +#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */ + +/****************** Bit definition for FLASH_WRPR register ******************/ +#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for FLASH_RDP register *******************/ +#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */ +#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */ + +/****************** Bit definition for FLASH_USER register ******************/ +#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */ +#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */ + +/****************** Bit definition for FLASH_Data0 register *****************/ +#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */ +#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_Data1 register *****************/ +#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */ +#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_WRP0 register ******************/ +#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP1 register ******************/ +#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP2 register ******************/ +#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP3 register ******************/ +#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +#ifdef STM32F10X_CL +/******************************************************************************/ +/* Ethernet MAC Registers bits definitions */ +/******************************************************************************/ +/* Bit definition for Ethernet MAC Control Register register */ +#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */ +#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */ +#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */ + #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */ + #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */ + #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */ + #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */ + #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */ + #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */ + #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */ + #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */ +#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */ +#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */ +#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */ +#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */ +#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */ +#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */ +#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */ +#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */ +#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling + a transmission attempt during retries after a collision: 0 =< r <2^k */ + #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */ + #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */ + #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */ + #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */ +#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */ +#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */ +#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */ + +/* Bit definition for Ethernet MAC Frame Filter Register */ +#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */ +#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */ +#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */ +#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */ +#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */ + #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */ + #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */ + #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */ +#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */ +#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */ +#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */ +#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */ +#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */ +#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */ + +/* Bit definition for Ethernet MAC Hash Table High Register */ +#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */ + +/* Bit definition for Ethernet MAC Hash Table Low Register */ +#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */ + +/* Bit definition for Ethernet MAC MII Address Register */ +#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */ +#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */ +#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */ + #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */ + #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */ + #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */ +#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */ +#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */ + +/* Bit definition for Ethernet MAC MII Data Register */ +#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */ + +/* Bit definition for Ethernet MAC Flow Control Register */ +#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */ +#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */ +#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */ + #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */ + #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */ + #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */ + #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */ +#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */ +#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */ +#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */ +#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */ + +/* Bit definition for Ethernet MAC VLAN Tag Register */ +#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */ +#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */ + +/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ +#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */ +/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers. + Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */ +/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask + Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask + Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask + Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask + Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - + RSVD - Filter1 Command - RSVD - Filter0 Command + Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset + Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16 + Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */ + +/* Bit definition for Ethernet MAC PMT Control and Status Register */ +#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */ +#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */ +#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */ +#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */ +#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */ +#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */ +#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */ + +/* Bit definition for Ethernet MAC Status Register */ +#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */ +#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */ +#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */ +#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */ +#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */ + +/* Bit definition for Ethernet MAC Interrupt Mask Register */ +#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */ +#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */ + +/* Bit definition for Ethernet MAC Address0 High Register */ +#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */ + +/* Bit definition for Ethernet MAC Address0 Low Register */ +#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */ + +/* Bit definition for Ethernet MAC Address1 High Register */ +#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */ + #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */ +#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address1 Low Register */ +#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */ + +/* Bit definition for Ethernet MAC Address2 High Register */ +#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address2 Low Register */ +#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */ + +/* Bit definition for Ethernet MAC Address3 High Register */ +#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */ + +/* Bit definition for Ethernet MAC Address3 Low Register */ +#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */ + +/******************************************************************************/ +/* Ethernet MMC Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet MMC Contol Register */ +#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */ +#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */ +#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */ +#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */ + +/* Bit definition for Ethernet MMC Receive Interrupt Register */ +#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Register */ +#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */ +#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */ +#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */ +#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */ +#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */ +#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */ + +/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */ +#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */ + +/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */ +#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */ + +/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */ +#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */ + +/******************************************************************************/ +/* Ethernet PTP Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet PTP Time Stamp Contol Register */ +#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */ +#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */ +#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */ +#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */ +#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */ +#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */ + +/* Bit definition for Ethernet PTP Sub-Second Increment Register */ +#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */ + +/* Bit definition for Ethernet PTP Time Stamp High Register */ +#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */ + +/* Bit definition for Ethernet PTP Time Stamp Low Register */ +#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */ +#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp High Update Register */ +#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Low Update Register */ +#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */ +#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Addend Register */ +#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */ + +/* Bit definition for Ethernet PTP Target Time High Register */ +#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */ + +/* Bit definition for Ethernet PTP Target Time Low Register */ +#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */ + +/******************************************************************************/ +/* Ethernet DMA Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet DMA Bus Mode Register */ +#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */ +#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */ +#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */ +#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */ + #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */ + #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */ + #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */ + #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */ +#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */ +#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ +#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */ + #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ + #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ + #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ + #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ +#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */ +#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */ +#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */ + +/* Bit definition for Ethernet DMA Transmit Poll Demand Register */ +#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */ + +/* Bit definition for Ethernet DMA Receive Poll Demand Register */ +#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */ + +/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */ +#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */ + +/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */ +#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */ + +/* Bit definition for Ethernet DMA Status Register */ +#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */ +#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */ +#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */ +#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */ + /* combination with EBS[2:0] for GetFlagStatus function */ + #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */ + #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */ + #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */ +#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */ + #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */ + #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */ + #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */ + #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */ + #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */ + #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */ +#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */ + #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */ + #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */ + #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */ + #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */ + #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */ + #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */ +#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */ +#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */ +#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */ +#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */ +#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */ +#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */ +#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */ +#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */ +#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */ +#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */ +#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */ +#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */ +#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */ +#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */ +#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */ + +/* Bit definition for Ethernet DMA Operation Mode Register */ +#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */ +#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */ +#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */ +#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */ +#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */ +#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */ + #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */ + #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */ + #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */ + #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */ + #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */ + #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */ + #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */ + #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */ +#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */ +#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */ +#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */ +#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */ + #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */ + #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */ + #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */ + #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */ +#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */ +#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */ + +/* Bit definition for Ethernet DMA Interrupt Enable Register */ +#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */ +#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */ +#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */ +#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */ +#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */ +#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */ +#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */ +#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */ +#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */ +#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */ +#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */ +#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */ +#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */ +#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */ +#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */ + +/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */ +#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */ +#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */ +#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */ +#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */ + +/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */ +#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */ +#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */ +#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */ +#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */ +#endif /* STM32F10X_CL */ + +/** + * @} + */ + + /** + * @} + */ + +#ifdef USE_STDPERIPH_DRIVER + #include "stm32f10x_conf.h" +#endif + +/** @addtogroup Exported_macro + * @{ + */ + +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_H */ + +/** + * @} + */ + + /** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c new file mode 100644 index 00000000..1457e497 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c @@ -0,0 +1,1101 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + /* vector table initialization disabled because this is handled by the OpenBLT + * bootloader, right before this program is started. Alternatively, you can + * enable this code again as long as you set VECT_TAB_OFFSET to the actual start + * address of the vector table. This is not the default start in flash because this + * is where the OpenBLT bootloader resides. + */ +#if 0 + #ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ + #else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ + #endif +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depedning on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + +#ifndef STM32F10X_CL + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#else + if (HSE_VALUE <= 24000000) + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; + } + else + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + } +#endif /* STM32F10X_CL */ +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); + + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); + + /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + +#else + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL7); +#else + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); +#else + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h new file mode 100644 index 00000000..739f3328 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F10X_H +#define __SYSTEM_STM32F10X_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F10x_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F10x_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F10X_H */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS debug support.htm b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS debug support.htm new file mode 100644 index 00000000..efda685b --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS debug support.htm @@ -0,0 +1,243 @@ + + + +CMSIS Debug Support + + + + + + + + +

CMSIS Debug Support

+ +
+ +

Cortex-M3 ITM Debug Access

+

+ The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that provides together with + the Serial Viewer Output trace capabilities for the microcontroller system. The ITM has + 32 communication channels which are able to transmit 32 / 16 / 8 bit values; two ITM + communication channels are used by CMSIS to output the following information: +

+
    +
  • ITM Channel 0: used for printf-style output via the debug interface.
    • +
  • ITM Channel 31: is reserved for RTOS kernel awareness debugging.
    • +
+ +

Debug IN / OUT functions

+

CMSIS provides following debug functions:

+
    +
  • ITM_SendChar (uses ITM channel 0)
    • +
  • ITM_ReceiveChar (uses global variable)
    • +
  • ITM_CheckChar (uses global variable)
    • +
+ +

ITM_SendChar

+

+ ITM_SendChar is used to transmit a character over ITM channel 0 from + the microcontroller system to the debug system.
+ Only a 8 bit value is transmitted. +

+
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  /* check if debugger connected and ITM channel enabled for tracing */
+  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA)  &&
+      (ITM->TCR & ITM_TCR_ITMENA)                  &&
+      (ITM->TER & (1UL << 0))  ) 
+  {
+    while (ITM->PORT[0].u32 == 0);
+    ITM->PORT[0].u8 = (uint8_t)ch;
+  }  
+  return (ch);
+}
+ +

ITM_ReceiveChar

+

+ ITM communication channel is only capable for OUT direction. For IN direction + a globel variable is used. A simple mechansim detects if a character is received. + The project to test need to be build with debug information. +

+ +

+ The globale variable ITM_RxBuffer is used to transmit a 8 bit value from debug system + to microcontroller system. ITM_RxBuffer is 32 bit wide to enshure a proper handshake. +

+
+extern volatile int ITM_RxBuffer;                    /* variable to receive characters                             */
+
+

+ A dedicated bit pattern is used to determin if ITM_RxBuffer is empty + or contains a valid value. +

+
+#define             ITM_RXBUFFER_EMPTY    0x5AA55AA5 /* value identifying ITM_RxBuffer is ready for next character */
+
+

+ ITM_ReceiveChar is used to receive a 8 bit value from the debug system. The function is nonblocking. + It returns the received character or '-1' if no character was available. +

+
+static __INLINE int ITM_ReceiveChar (void) {
+  int ch = -1;                               /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+  
+  return (ch); 
+}
+
+ +

ITM_CheckChar

+

+ ITM_CheckChar is used to check if a character is received. +

+
+static __INLINE int ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+ + +

ITM Debug Support in uVision

+

+ uVision uses in a debug session the Debug (printf) Viewer window to + display the debug data. +

+

Direction microcontroller system -> uVision:

+
    +
  • + Characters received via ITM communication channel 0 are written in a printf style + to Debug (printf) Viewer window. +
    • +
+ +

Direction uVision -> microcontroller system:

+
    +
  • Check if ITM_RxBuffer variable is available (only performed once).
    • +
  • Read character from Debug (printf) Viewer window.
    • +
  • If ITM_RxBuffer empty write character to ITM_RxBuffer.
    • +
+ +

Note

+
    +

  • Current solution does not use a buffer machanism for trasmitting the characters.

    +
    • +
+ +

RTX Kernel awareness in uVision

+

+ uVision / RTX are using a simple and efficient solution for RTX Kernel awareness. + No format overhead is necessary.
+ uVsion debugger decodes the RTX events via the 32 / 16 / 8 bit ITM write access + to ITM communication channel 31. +

+ +

Following RTX events are traced:

+
    +
  • Task Create / Delete event +
      +
    1. 32 bit access. Task start address is transmitted
      2. +
    2. 16 bit access. Task ID and Create/Delete flag are transmitted
      + High byte holds Create/Delete flag, Low byte holds TASK ID. +
      3. +
    +
    • +
  • Task switch event +
      +
    1. 8 bit access. Task ID of current task is transmitted
      2. +
    +
    • +
+ +

Note

+
    +

  • Other RTOS information could be retrieved via memory read access in a polling mode manner.

    +
    • +
+ + +

 

+ +
+ +

Copyright © KEIL - An ARM Company.
+All rights reserved.
+Visit our web site at www.keil.com. +

+ + + + \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS_changes.htm b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS_changes.htm new file mode 100644 index 00000000..162ffcc9 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/CMSIS_changes.htm @@ -0,0 +1,320 @@ + + + +CMSIS Changes + + + + + + + + +

Changes to CMSIS version V1.20

+ +
+ +

1. Removed CMSIS Middelware packages

+

+ CMSIS Middleware is on hold from ARM side until a agreement between all CMSIS partners is found. +

+ +

2. SystemFrequency renamed to SystemCoreClock

+

+ The variable name SystemCoreClock is more precise than SystemFrequency + because the variable holds the clock value at which the core is running. +

+ +

3. Changed startup concept

+

+ The old startup concept (calling SystemInit_ExtMemCtl from startup file and calling SystemInit + from main) has the weakness that it does not work for controllers which need a already + configuerd clock system to configure the external memory controller. +

+ +

Changed startup concept

+
    +
  • + SystemInit() is called from startup file before premain. +
    • +
  • + SystemInit() configures the clock system and also configures + an existing external memory controller. +
    • +
  • + SystemInit() must not use global variables. +
    • +
  • + SystemCoreClock is initialized with a correct predefined value. +
    • +
  • + Additional function void SystemCoreClockUpdate (void) is provided.
    + SystemCoreClockUpdate() updates the variable SystemCoreClock + and must be called whenever the core clock is changed.
    + SystemCoreClockUpdate() evaluates the clock register settings and calculates + the current core clock. +
    • +
+ + +

4. Advanced Debug Functions

+

+ ITM communication channel is only capable for OUT direction. To allow also communication for + IN direction a simple concept is provided. +

+
    +
  • + Global variable volatile int ITM_RxBuffer used for IN data. +
    • +
  • + Function int ITM_CheckChar (void) checks if a new character is available. +
    • +
  • + Function int ITM_ReceiveChar (void) retrieves the new character. +
    • +
+ +

+ For detailed explanation see file CMSIS debug support.htm. +

+ + +

5. Core Register Bit Definitions

+

+ Files core_cm3.h and core_cm0.h contain now bit definitions for Core Registers. The name for the + defines correspond with the Cortex-M Technical Reference Manual. +

+

+ e.g. SysTick structure with bit definitions +

+
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+  memory mapped structure for SysTick
+  @{
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                         /*!< Offset: 0x00  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                         /*!< Offset: 0x04  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                          /*!< Offset: 0x08  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                        /*!< Offset: 0x0C  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1ul << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1ul << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1ul << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1ul << SysTick_CTRL_ENABLE_Pos)               /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos)        /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1ul << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1ul << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFul << SysTick_VAL_CURRENT_Pos)        /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */
+ +

7. DoxyGen Tags

+

+ DoxyGen tags in files core_cm3.[c,h] and core_cm0.[c,h] are reworked to create proper documentation + using DoxyGen. +

+ +

8. Folder Structure

+

+ The folder structure is changed to differentiate the single support packages. +

+ +
    +
  • CM0
    • +
  • CM3 +
      +
    • CoreSupport
      • +
    • DeviceSupport
      • +
        +
      • Vendor +
          +
        • Device +
            +
          • Startup +
              +
            • Toolchain
              • +
            • Toolchain
              • +
            • ...
              • +
            +
            • +
          +
          • +
        • Device
          • +
        • ...
          • +
        +
        • +
      • Vendor
        • +
      • ...
        • +
      + +
    • Example +
        +
      • Toolchain +
          +
        • Device
          • +
        • Device
          • +
        • ...
          • +
        +
        • +
      • Toolchain
        • +
      • ...
        • +
      +
      • +
    +
    • + +
  • Documentation
    • +
+ +

9. Open Points

+

+ Following points need to be clarified and solved: +

+
    +
  • +

    + Equivalent C and Assembler startup files. +

    +

    + Is there a need for having C startup files although assembler startup files are + very efficient and do not need to be changed? +

    +

    • +
  • +

    + Placing of HEAP in external RAM. +

    +

    + It must be possible to place HEAP in external RAM if the device supports an + external memory controller. +

    +
    • +
  • +

    + Placing of STACK /HEAP. +

    +

    + STACK should always be placed at the end of internal RAM. +

    +

    + If HEAP is placed in internal RAM than it should be placed after RW ZI section. +

    +
    • +
  • +

    + Removing core_cm3.c and core_cm0.c. +

    +

    + On a long term the functions in core_cm3.c and core_cm0.c must be replaced with + appropriate compiler intrinsics. +

    +
    • +
+ + +

10. Limitations

+

+ The following limitations are not covered with the current CMSIS version: +

+
    +
  • + No C startup files for ARM toolchain are provided. +
    • +
  • + No C startup files for GNU toolchain are provided. +
    • +
  • + No C startup files for IAR toolchain are provided. +
    • +
  • + No Tasking projects are provided yet. +
    • +
diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/Documentation/CMSIS_Core.htm b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/Documentation/CMSIS_Core.htm new file mode 100644 index 00000000..6fd131e1 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/Documentation/CMSIS_Core.htm @@ -0,0 +1,1337 @@ + + + + CMSIS: Cortex Microcontroller Software Interface Standard + + + +

Cortex Microcontroller Software Interface Standard

+ +

This file describes the Cortex Microcontroller Software Interface Standard (CMSIS).

+

Version: 1.30 - 30. October 2009

+ +

Information in this file, the accompany manuals, and software is
+ Copyright © ARM Ltd.
All rights reserved. +

+ +
+ +

Revision History

+
    +
  • Version 1.00: initial release.
    • +
  • Version 1.01: added __LDREXx, __STREXx, and __CLREX.
    • +
  • Version 1.02: added Cortex-M0.
    • +
  • Version 1.10: second review.
    • +
  • Version 1.20: third review.
    • +
  • Version 1.30 PRE-RELEASE: reworked Startup Concept, additional Debug Functionality.
    • +
  • Version 1.30 2nd PRE-RELEASE: changed folder structure, added doxyGen comments, added Bit definitions.
    • +
  • Version 1.30: updated Device Support Packages.
    • +
+ +
+ +

Contents

+ +
    +
  1. About
    2. +
  2. Coding Rules and Conventions
    3. +
  3. CMSIS Files
    4. +
  4. Core Peripheral Access Layer
    5. +
  5. CMSIS Example
    6. +
+ +

About

+ +

+ The Cortex Microcontroller Software Interface Standard (CMSIS) answers the challenges + that are faced when software components are deployed to physical microcontroller devices based on a + Cortex-M0 or Cortex-M3 processor. The CMSIS will be also expanded to future Cortex-M + processor cores (the term Cortex-M is used to indicate that). The CMSIS is defined in close co-operation + with various silicon and software vendors and provides a common approach to interface to peripherals, + real-time operating systems, and middleware components. +

+ +

ARM provides as part of the CMSIS the following software layers that are +available for various compiler implementations:

+
    +
  • Core Peripheral Access Layer: contains name definitions, + address definitions and helper functions to + access core registers and peripherals. It defines also a device + independent interface for RTOS Kernels that includes debug channel + definitions.
    • +
+ +

These software layers are expanded by Silicon partners with:

+
    +
  • Device Peripheral Access Layer: provides definitions + for all device peripherals
    • +
  • Access Functions for Peripherals (optional): provides + additional helper functions for peripherals
    • +
+ +

CMSIS defines for a Cortex-M Microcontroller System:

+
    +
  • A common way to access peripheral registers + and a common way to define exception vectors.
    • +
  • The register names of the Core + Peripherals and the names of the Core + Exception Vectors.
    • +
  • An device independent interface for RTOS Kernels including a debug + channel.
    • +
+ +

+ By using CMSIS compliant software components, the user can easier re-use template code. + CMSIS is intended to enable the combination of software components from multiple middleware vendors. +

+ +

Coding Rules and Conventions

+ +

+ The following section describes the coding rules and conventions used in the CMSIS + implementation. It contains also information about data types and version number information. +

+ +

Essentials

+
    +
  • The CMSIS C code conforms to MISRA 2004 rules. In case of MISRA violations, + there are disable and enable sequences for PC-LINT inserted.
    • +
  • ANSI standard data types defined in the ANSI C header file + <stdint.h> are used.
    • +
  • #define constants that include expressions must be enclosed by + parenthesis.
    • +
  • Variables and parameters have a complete data type.
    • +
  • All functions in the Core Peripheral Access Layer are + re-entrant.
    • +
  • The Core Peripheral Access Layer has no blocking code + (which means that wait/query loops are done at other software layers).
    • +
  • For each exception/interrupt there is definition for: +
      +
    • an exception/interrupt handler with the postfix _Handler + (for exceptions) or _IRQHandler (for interrupts).
      • +
    • a default exception/interrupt handler (weak definition) that contains an endless loop.
      • +
    • a #define of the interrupt number with the postfix _IRQn.
      • +
    • +
+ +

Recommendations

+ +

The CMSIS recommends the following conventions for identifiers.

+
    +
  • CAPITAL names to identify Core Registers, Peripheral Registers, and CPU Instructions.
    • +
  • CamelCase names to identify peripherals access functions and interrupts.
    • +
  • PERIPHERAL_ prefix to identify functions that belong to specify peripherals.
    • +
  • Doxygen comments for all functions are included as described under Function Comments below.
    • +
+ +Comments + +
    +
  • Comments use the ANSI C90 style (/* comment */) or C++ style + (// comment). It is assumed that the programming tools support today + consistently the C++ comment style.
    • +
  • Function Comments provide for each function the following information: +
      +
    • one-line brief function overview.
      • +
    • detailed parameter explanation.
      • +
    • detailed information about return values.
      • +
    • detailed description of the actual function.
      • +
    +

    Doxygen Example:

    + 
    +/** 
+ * @brief  Enable Interrupt in NVIC Interrupt Controller
+ * @param  IRQn  interrupt number that specifies the interrupt
+ * @return none.
+ * Enable the specified interrupt in the NVIC Interrupt Controller.
+ * Other settings of the interrupt such as priority are not affected.
+ */
    +
    • +
+ +

Data Types and IO Type Qualifiers

+ +

+ The Cortex-M HAL uses the standard types from the standard ANSI C header file + <stdint.h>. IO Type Qualifiers are used to specify the access + to peripheral variables. IO Type Qualifiers are indented to be used for automatic generation of + debug information of peripheral registers. +

+ + + + + + + + + + + + + + + + + + + + + + + + +
IO Type Qualifier#defineDescription
__Ivolatile constRead access only
__OvolatileWrite access only
__IOvolatileRead and write access
+ +

CMSIS Version Number

+

+ File core_cm3.h contains the version number of the CMSIS with the following define: +

+ +
+#define __CM3_CMSIS_VERSION_MAIN  (0x01)      /* [31:16] main version       */
+#define __CM3_CMSIS_VERSION_SUB   (0x30)      /* [15:0]  sub version        */
+#define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB)
+ +

+ File core_cm0.h contains the version number of the CMSIS with the following define: +

+ +
+#define __CM0_CMSIS_VERSION_MAIN  (0x01)      /* [31:16] main version       */
+#define __CM0_CMSIS_VERSION_SUB   (0x30)      /* [15:0]  sub version        */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB)
+ + +

CMSIS Cortex Core

+

+ File core_cm3.h contains the type of the CMSIS Cortex-M with the following define: +

+ +
+#define __CORTEX_M                (0x03)
+ +

+ File core_cm0.h contains the type of the CMSIS Cortex-M with the following define: +

+ +
+#define __CORTEX_M                (0x00)
+ + +

CMSIS Files

+

+ This section describes the Files provided in context with the CMSIS to access the Cortex-M + hardware and peripherals. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FileProviderDescription
device.hDevice specific (provided by silicon partner)Defines the peripherals for the actual device. The file may use + several other include files to define the peripherals of the actual device.
core_cm0.hARM (for RealView ARMCC, IAR, and GNU GCC)Defines the core peripherals for the Cortex-M0 CPU and core peripherals.
core_cm3.hARM (for RealView ARMCC, IAR, and GNU GCC)Defines the core peripherals for the Cortex-M3 CPU and core peripherals.
core_cm0.cARM (for RealView ARMCC, IAR, and GNU GCC)Provides helper functions that access core registers.
core_cm3.cARM (for RealView ARMCC, IAR, and GNU GCC)Provides helper functions that access core registers.
startup_deviceARM (adapted by compiler partner / silicon partner)Provides the Cortex-M startup code and the complete (device specific) Interrupt Vector Table
system_deviceARM (adapted by silicon partner)Provides a device specific configuration file for the device. It configures the device initializes + typically the oscillator (PLL) that is part of the microcontroller device
+ +

device.h

+ +

+ The file device.h is provided by the silicon vendor and is the + central include file that the application programmer is using in + the C source code. This file contains: +

+
    +
  • +

    Interrupt Number Definition: provides interrupt numbers + (IRQn) for all core and device specific exceptions and interrupts.

    +
    • +
  • +

    Configuration for core_cm0.h / core_cm3.h: reflects the + actual configuration of the Cortex-M processor that is part of the actual + device. As such the file core_cm0.h / core_cm3.h is included that + implements access to processor registers and core peripherals.

    +
    • +
  • +

    Device Peripheral Access Layer: provides definitions + for all device peripherals. It contains all data structures and the address + mapping for the device specific peripherals.

    +
    • +
  • Access Functions for Peripherals (optional): provides + additional helper functions for peripherals that are useful for programming + of these peripherals. Access Functions may be provided as inline functions + or can be extern references to a device specific library provided by the + silicon vendor.
    • +
+ + +

Interrupt Number Definition

+ +

To access the device specific interrupts the device.h file defines IRQn +numbers for the complete device using a enum typedef as shown below:

+
+typedef enum IRQn
+{
+/******  Cortex-M3 Processor Exceptions/Interrupt Numbers ************************************************/
+  NonMaskableInt_IRQn             = -14,      /*!< 2 Non Maskable Interrupt                              */
+  HardFault_IRQn                  = -13,      /*!< 3 Cortex-M3 Hard Fault Interrupt                      */
+  MemoryManagement_IRQn           = -12,      /*!< 4 Cortex-M3 Memory Management Interrupt               */
+  BusFault_IRQn                   = -11,      /*!< 5 Cortex-M3 Bus Fault Interrupt                       */
+  UsageFault_IRQn                 = -10,      /*!< 6 Cortex-M3 Usage Fault Interrupt                     */
+  SVCall_IRQn                     = -5,       /*!< 11 Cortex-M3 SV Call Interrupt                        */
+  DebugMonitor_IRQn               = -4,       /*!< 12 Cortex-M3 Debug Monitor Interrupt                  */
+  PendSV_IRQn                     = -2,       /*!< 14 Cortex-M3 Pend SV Interrupt                        */
+  SysTick_IRQn                    = -1,       /*!< 15 Cortex-M3 System Tick Interrupt                    */
+/******  STM32 specific Interrupt Numbers ****************************************************************/
+  WWDG_STM_IRQn                   = 0,        /*!< Window WatchDog Interrupt                             */
+  PVD_STM_IRQn                    = 1,        /*!< PVD through EXTI Line detection Interrupt             */
+  :
+  :
+  } IRQn_Type;
+ + +

Configuration for core_cm0.h / core_cm3.h

+

+ The Cortex-M core configuration options which are defined for each device implementation. Some + configuration options are reflected in the CMSIS layer using the #define settings described below. +

+

+ To access core peripherals file device.h includes file core_cm0.h / core_cm3.h. + Several features in core_cm0.h / core_cm3.h are configured by the following defines that must be + defined before #include <core_cm0.h> / #include <core_cm3.h> + preprocessor command. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
#defineFileValueDescription
__NVIC_PRIO_BITScore_cm0.h(2)Number of priority bits implemented in the NVIC (device specific)
__NVIC_PRIO_BITScore_cm3.h(2 ... 8)Number of priority bits implemented in the NVIC (device specific)
__MPU_PRESENTcore_cm0.h, core_cm3.h(0, 1)Defines if an MPU is present or not
__Vendor_SysTickConfigcore_cm0.h, core_cm3.h(1)When this define is setup to 1, the SysTickConfig function + in core_cm3.h is excluded. In this case the device.h + file must contain a vendor specific implementation of this function.
+ + +

Device Peripheral Access Layer

+

+ Each peripheral uses a prefix which consists of <device abbreviation>_ + and <peripheral name>_ to identify peripheral registers that access this + specific peripheral. The intention of this is to avoid name collisions caused + due to short names. If more than one peripheral of the same type exists, + identifiers have a postfix (digit or letter). For example: +

+
    +
  • <device abbreviation>_UART_Type: defines the generic register layout for all UART channels in a device. + 
    +typedef struct
+{
+  union {
+  __I  uint8_t  RBR;                     /*!< Offset: 0x000   Receiver Buffer Register    */
+  __O  uint8_t  THR;                     /*!< Offset: 0x000   Transmit Holding Register   */
+  __IO uint8_t  DLL;                     /*!< Offset: 0x000   Divisor Latch LSB           */
+       uint32_t RESERVED0;
+  };
+  union {
+  __IO uint8_t  DLM;                     /*!< Offset: 0x004   Divisor Latch MSB           */
+  __IO uint32_t IER;                     /*!< Offset: 0x004   Interrupt Enable Register   */
+  };
+  union {
+  __I  uint32_t IIR;                     /*!< Offset: 0x008   Interrupt ID Register       */
+  __O  uint8_t  FCR;                     /*!< Offset: 0x008   FIFO Control Register       */
+  };
+  __IO uint8_t  LCR;                     /*!< Offset: 0x00C   Line Control Register       */
+       uint8_t  RESERVED1[7];
+  __I  uint8_t  LSR;                     /*!< Offset: 0x014   Line Status Register        */
+       uint8_t  RESERVED2[7];
+  __IO uint8_t  SCR;                     /*!< Offset: 0x01C   Scratch Pad Register        */
+       uint8_t  RESERVED3[3];
+  __IO uint32_t ACR;                     /*!< Offset: 0x020   Autobaud Control Register   */
+  __IO uint8_t  ICR;                     /*!< Offset: 0x024   IrDA Control Register       */
+       uint8_t  RESERVED4[3];
+  __IO uint8_t  FDR;                     /*!< Offset: 0x028   Fractional Divider Register */
+       uint8_t  RESERVED5[7];
+  __IO uint8_t  TER;                     /*!< Offset: 0x030   Transmit Enable Register    */
+       uint8_t  RESERVED6[39];
+  __I  uint8_t  FIFOLVL;                 /*!< Offset: 0x058   FIFO Level Register         */
+} LPC_UART_TypeDef;
    +
    • +
  • <device abbreviation>_UART1: is a pointer to a register structure that refers to a specific UART. + For example UART1->DR is the data register of UART1. + 
    +#define LPC_UART2             ((LPC_UART_TypeDef      *) LPC_UART2_BASE    )
+#define LPC_UART3             ((LPC_UART_TypeDef      *) LPC_UART3_BASE    )
    +
    • +
+ +
Minimal Requiements
+

+ To access the peripheral registers and related function in a device the files device.h + and core_cm0.h / core_cm3.h defines as a minimum: +

+
    +
  • The Register Layout Typedef for each peripheral that defines all register names. + Names that start with RESERVE are used to introduce space into the structure to adjust the addresses of + the peripheral registers. For example: + 
    +typedef struct {
+  __IO uint32_t CTRL;      /* SysTick Control and Status Register */
+  __IO uint32_t LOAD;      /* SysTick Reload Value Register       */
+  __IO uint32_t VAL;       /* SysTick Current Value Register      */
+  __I  uint32_t CALIB;     /* SysTick Calibration Register        */
+  } SysTick_Type;
    +
    • + +
  • + Base Address for each peripheral (in case of multiple peripherals + that use the same register layout typedef multiple base addresses are defined). For example: + 
    +#define SysTick_BASE (SCS_BASE + 0x0010)            /* SysTick Base Address */
    +
    • + +
  • + Access Definition for each peripheral (in case of multiple peripherals that use + the same register layout typedef multiple access definitions exist, i.e. LPC_UART0, + LPC_UART2). For Example: + 
    +#define SysTick ((SysTick_Type *) SysTick_BASE)     /* SysTick access definition */
    +
    • +
+ +

+ These definitions allow to access the peripheral registers from user code with simple assignments like: +

+
SysTick->CTRL = 0;
+ +
Optional Features
+

In addition the device.h file may define:

+
    +
  • + #define constants that simplify access to the peripheral registers. + These constant define bit-positions or other specific patterns are that required for the + programming of the peripheral registers. The identifiers used start with + <device abbreviation>_ and <peripheral name>_. + It is recommended to use CAPITAL letters for such #define constants. +
    • +
  • + Functions that perform more complex functions with the peripheral (i.e. status query before + a sending register is accessed). Again these function start with + <device abbreviation>_ and <peripheral name>_. +
    • +
+ +

core_cm0.h and core_cm0.c

+

+ File core_cm0.h describes the data structures for the Cortex-M0 core peripherals and does + the address mapping of this structures. It also provides basic access to the Cortex-M0 core registers + and core peripherals with efficient functions (defined as static inline). +

+

+ File core_cm0.c defines several helper functions that access processor registers. +

+

Together these files implement the Core Peripheral Access Layer for a Cortex-M0.

+ +

core_cm3.h and core_cm3.c

+

+ File core_cm3.h describes the data structures for the Cortex-M3 core peripherals and does + the address mapping of this structures. It also provides basic access to the Cortex-M3 core registers + and core peripherals with efficient functions (defined as static inline). +

+

+ File core_cm3.c defines several helper functions that access processor registers. +

+

Together these files implement the Core Peripheral Access Layer for a Cortex-M3.

+ +

startup_device

+

+ A template file for startup_device is provided by ARM for each supported + compiler. It is adapted by the silicon vendor to include interrupt vectors for all device specific + interrupt handlers. Each interrupt handler is defined as weak function + to an dummy handler. Therefore the interrupt handler can be directly used in application software + without any requirements to adapt the startup_device file. +

+

+ The following exception names are fixed and define the start of the vector table for a Cortex-M0: +

+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+ +

+ The following exception names are fixed and define the start of the vector table for a Cortex-M3: +

+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     MemManage_Handler         ; MPU Fault Handler
+                DCD     BusFault_Handler          ; Bus Fault Handler
+                DCD     UsageFault_Handler        ; Usage Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     DebugMon_Handler          ; Debug Monitor Handler
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+ +

+ In the following examples for device specific interrupts are shown: +

+
+; External Interrupts
+                DCD     WWDG_IRQHandler           ; Window Watchdog
+                DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
+                DCD     TAMPER_IRQHandler         ; Tamper
+ +

+ Device specific interrupts must have a dummy function that can be overwritten in user code. + Below is an example for this dummy function. +

+
+Default_Handler PROC
+                EXPORT WWDG_IRQHandler   [WEAK]
+                EXPORT PVD_IRQHandler    [WEAK]
+                EXPORT TAMPER_IRQHandler [WEAK]
+                :
+                :
+                WWDG_IRQHandler
+                PVD_IRQHandler
+                TAMPER_IRQHandler
+                :
+                :
+                B .
+                ENDP
+ +

+ The user application may simply define an interrupt handler function by using the handler name + as shown below. +

+
+void WWDG_IRQHandler(void)
+{
+  :
+  :
+}
+ + +

system_device.c

+

+ A template file for system_device.c is provided by ARM but adapted by + the silicon vendor to match their actual device. As a minimum requirement + this file must provide a device specific system configuration function and a global variable + that contains the system frequency. It configures the device and initializes typically the + oscillator (PLL) that is part of the microcontroller device. +

+

+ The file system_device.c must provide + as a minimum requirement the SystemInit function as shown below. +

+ + + + + + + + + + + + + + + + +
Function DefinitionDescription
void SystemInit (void)Setup the microcontroller system. Typically this function configures the + oscillator (PLL) that is part of the microcontroller device. For systems + with variable clock speed it also updates the variable SystemCoreClock.
+ SystemInit is called from startup_device file.
void SystemCoreClockUpdate (void)Updates the variable SystemCoreClock and must be called whenever the + core clock is changed during program execution. SystemCoreClockUpdate() + evaluates the clock register settings and calculates the current core clock. +
+ +

+ Also part of the file system_device.c + is the variable SystemCoreClock which contains the current CPU clock speed shown below. +

+ + + + + + + + + + + + +
Variable DefinitionDescription
uint32_t SystemCoreClockContains the system core clock (which is the system clock frequency supplied + to the SysTick timer and the processor core clock). This variable can be + used by the user application to setup the SysTick timer or configure other + parameters. It may also be used by debugger to query the frequency of the + debug timer or configure the trace clock speed.
+ SystemCoreClock is initialized with a correct predefined value.

+ The compiler must be configured to avoid the removal of this variable in + case that the application program is not using it. It is important for + debug systems that the variable is physically present in memory so that + it can be examined to configure the debugger.
+ +

Note

+
    +

  • The above definitions are the minimum requirements for the file + system_device.c. This + file may export more functions or variables that provide a more flexible + configuration of the microcontroller system.

    +
    • +
+ + +

Core Peripheral Access Layer

+ +

Cortex-M Core Register Access

+

+ The following functions are defined in core_cm0.h / core_cm3.h + and provide access to Cortex-M core registers. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Function DefinitionCoreCore RegisterDescription
void __enable_irq (void)M0, M3PRIMASK = 0Global Interrupt enable (using the instruction CPSIE + i)
void __disable_irq (void)M0, M3PRIMASK = 1Global Interrupt disable (using the instruction + CPSID i)
void __set_PRIMASK (uint32_t value)M0, M3PRIMASK = valueAssign value to Priority Mask Register (using the instruction + MSR)
uint32_t __get_PRIMASK (void)M0, M3return PRIMASKReturn Priority Mask Register (using the instruction + MRS)
void __enable_fault_irq (void)M3FAULTMASK = 0Global Fault exception and Interrupt enable (using the + instruction CPSIE + f)
void __disable_fault_irq (void)M3FAULTMASK = 1Global Fault exception and Interrupt disable (using the + instruction CPSID f)
void __set_FAULTMASK (uint32_t value)M3FAULTMASK = valueAssign value to Fault Mask Register (using the instruction + MSR)
uint32_t __get_FAULTMASK (void)M3return FAULTMASKReturn Fault Mask Register (using the instruction MRS)
void __set_BASEPRI (uint32_t value)M3BASEPRI = valueSet Base Priority (using the instruction MSR)
uiuint32_t __get_BASEPRI (void)M3return BASEPRIReturn Base Priority (using the instruction MRS)
void __set_CONTROL (uint32_t value)M0, M3CONTROL = valueSet CONTROL register value (using the instruction MSR)
uint32_t __get_CONTROL (void)M0, M3return CONTROLReturn Control Register Value (using the instruction + MRS)
void __set_PSP (uint32_t TopOfProcStack)M0, M3PSP = TopOfProcStackSet Process Stack Pointer value (using the instruction + MSR)
uint32_t __get_PSP (void)M0, M3return PSPReturn Process Stack Pointer (using the instruction MRS)
void __set_MSP (uint32_t TopOfMainStack)M0, M3MSP = TopOfMainStackSet Main Stack Pointer (using the instruction MSR)
uint32_t __get_MSP (void)M0, M3return MSPReturn Main Stack Pointer (using the instruction MRS)
+ +

Cortex-M Instruction Access

+

+ The following functions are defined in core_cm0.h / core_cm3.hand + generate specific Cortex-M instructions. The functions are implemented in the file + core_cm0.c / core_cm3.c. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
NameCoreGenerated CPU InstructionDescription
void __NOP (void)M0, M3NOPNo Operation
void __WFI (void)M0, M3WFIWait for Interrupt
void __WFE (void)M0, M3WFEWait for Event
void __SEV (void)M0, M3SEVSet Event
void __ISB (void)M0, M3ISBInstruction Synchronization Barrier
void __DSB (void)M0, M3DSBData Synchronization Barrier
void __DMB (void)M0, M3DMBData Memory Barrier
uint32_t __REV (uint32_t value)M0, M3REVReverse byte order in integer value.
uint32_t __REV16 (uint16_t value)M0, M3REV16Reverse byte order in unsigned short value.
sint32_t __REVSH (sint16_t value)M0, M3REVSHReverse byte order in signed short value with sign extension to integer.
uint32_t __RBIT (uint32_t value)M3RBITReverse bit order of value
uint8_t __LDREXB (uint8_t *addr)M3LDREXBLoad exclusive byte
uint16_t __LDREXH (uint16_t *addr)M3LDREXHLoad exclusive half-word
uint32_t __LDREXW (uint32_t *addr)M3LDREXWLoad exclusive word
uint32_t __STREXB (uint8_t value, uint8_t *addr)M3STREXBStore exclusive byte
uint32_t __STREXB (uint16_t value, uint16_t *addr)M3STREXHStore exclusive half-word
uint32_t __STREXB (uint32_t value, uint32_t *addr)M3STREXWStore exclusive word
void __CLREX (void)M3CLREXRemove the exclusive lock created by __LDREXB, __LDREXH, or __LDREXW
+ + +

NVIC Access Functions

+

+ The CMSIS provides access to the NVIC via the register interface structure and several helper + functions that simplify the setup of the NVIC. The CMSIS HAL uses IRQ numbers (IRQn) to + identify the interrupts. The first device interrupt has the IRQn value 0. Therefore negative + IRQn values are used for processor core exceptions. +

+

+ For the IRQn values of core exceptions the file device.h provides + the following enum names. +

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Core Exception enum ValueCoreIRQnDescription
NonMaskableInt_IRQnM0, M3-14Cortex-M Non Maskable Interrupt
HardFault_IRQnM0, M3-13Cortex-M Hard Fault Interrupt
MemoryManagement_IRQnM3-12Cortex-M Memory Management Interrupt
BusFault_IRQnM3-11Cortex-M Bus Fault Interrupt
UsageFault_IRQnM3-10Cortex-M Usage Fault Interrupt
SVCall_IRQnM0, M3-5Cortex-M SV Call Interrupt
DebugMonitor_IRQnM3-4Cortex-M Debug Monitor Interrupt
PendSV_IRQnM0, M3-2Cortex-M Pend SV Interrupt
SysTick_IRQnM0, M3-1Cortex-M System Tick Interrupt
+ +

The following functions simplify the setup of the NVIC. +The functions are defined as static inline.

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
NameCoreParameterDescription
void NVIC_SetPriorityGrouping (uint32_t PriorityGroup)M3Priority Grouping ValueSet the Priority Grouping (Groups . Subgroups)
uint32_t NVIC_GetPriorityGrouping (void)M3(void)Get the Priority Grouping (Groups . Subgroups)
void NVIC_EnableIRQ (IRQn_Type IRQn)M0, M3IRQ NumberEnable IRQn
void NVIC_DisableIRQ (IRQn_Type IRQn)M0, M3IRQ NumberDisable IRQn
uint32_t NVIC_GetPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberReturn 1 if IRQn is pending else 0
void NVIC_SetPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberSet IRQn Pending
void NVIC_ClearPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberClear IRQn Pending Status
uint32_t NVIC_GetActive (IRQn_Type IRQn)M3IRQ NumberReturn 1 if IRQn is active else 0
void NVIC_SetPriority (IRQn_Type IRQn, uint32_t priority)M0, M3IRQ Number, PrioritySet Priority for IRQn
+ (not threadsafe for Cortex-M0)
uint32_t NVIC_GetPriority (IRQn_Type IRQn)M0, M3IRQ NumberGet Priority for IRQn
uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)M3IRQ Number, Priority Group, Preemptive Priority, Sub PriorityEncode priority for given group, preemptive and sub priority
NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)M3IRQ Number, Priority, pointer to Priority Group, pointer to Preemptive Priority, pointer to Sub PriorityDeccode given priority to group, preemptive and sub priority
void NVIC_SystemReset (void)M0, M3(void)Resets the System
+

Note

+
    +

  • The processor exceptions have negative enum values. Device specific interrupts + have positive enum values and start with 0. The values are defined in + device.h file. +

    +
    • +

  • The values for PreemptPriority and SubPriority + used in functions NVIC_EncodePriority and NVIC_DecodePriority + depend on the available __NVIC_PRIO_BITS implemented in the NVIC. +

    +
    • +
+ + +

SysTick Configuration Function

+ +

The following function is used to configure the SysTick timer and start the +SysTick interrupt.

+ + + + + + + + + + + + + + +
NameParameterDescription
uint32_t SysTickConfig + (uint32_t ticks)ticks is SysTick counter reload valueSetup the SysTick timer and enable the SysTick interrupt. After this + call the SysTick timer creates interrupts with the specified time + interval.
+
+ Return: 0 when successful, 1 on failure.
+
+ + +

Cortex-M3 ITM Debug Access

+ +

The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that +provides together with the Serial Viewer Output trace capabilities for the +microcontroller system. The ITM has 32 communication channels; two ITM +communication channels are used by CMSIS to output the following information:

+
    +
  • ITM Channel 0: implements the ITM_SendChar function + which can be used for printf-style output via the debug interface.
    • +
  • ITM Channel 31: is reserved for the RTOS kernel and can be used for + kernel awareness debugging.
    • +
+

Note

+
    +

  • The ITM channel 31 is selected for the RTOS kernel since some kernels + may use the Privileged level for program execution. ITM + channels have 4 groups with 8 channels each, whereby each group can be + configured for access rights in the Unprivileged level. The ITM channel 0 + may be therefore enabled for the user task whereas ITM channel 31 may be + accessible only in Privileged level from the RTOS kernel itself.

    +
    • +
+ +

The prototype of the ITM_SendChar routine is shown in the +table below.

+ + + + + + + + + + + + + + +
NameParameterDescription
void uint32_t ITM_SendChar(uint32_t chr)character to outputThe function outputs a character via the ITM channel 0. The + function returns when no debugger is connected that has booked the + output. It is blocking when a debugger is connected, but the + previous character send is not transmitted.

+ Return: the input character 'chr'.
+ +

+ Example for the usage of the ITM Channel 31 for RTOS Kernels: +

+
+  // check if debugger connected and ITM channel enabled for tracing
+  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
+  (ITM->TCR & ITM_TCR_ITMENA) &&
+  (ITM->TER & (1UL << 31))) {
+    // transmit trace data
+    while (ITM->PORT31_U32 == 0);
+    ITM->PORT[31].u8 = task_id;      // id of next task
+    while (ITM->PORT[31].u32 == 0);
+    ITM->PORT[31].u32 = task_status; // status information
+  }
+ + +

Cortex-M3 additional Debug Access

+ +

CMSIS provides additional debug functions to enlarge the Cortex-M3 Debug Access. +Data can be transmitted via a certain global buffer variable towards the target system.

+ +

The buffer variable and the prototypes of the additional functions are shown in the +table below.

+ + + + + + + + + + + + + + + + + + + + + + + + +
NameParameterDescription
extern volatile int ITM_RxBuffer Buffer to transmit data towards debug system.

+ Value 0x5AA55AA5 indicates that buffer is empty.
int ITM_ReceiveChar (void)noneThe nonblocking functions returns the character stored in + ITM_RxBuffer.

+ Return: -1 indicates that no character was received.
int ITM_CheckChar (void)noneThe function checks if a character is available in ITM_RxBuffer.

+ Return: 1 indicates that a character is available, 0 indicates that + no character is available.
+ + +

CMSIS Example

+

+ The following section shows a typical example for using the CMSIS layer in user applications. + The example is based on a STM32F10x Device. +

+
+#include "stm32f10x.h"
+
+volatile uint32_t msTicks;                       /* timeTicks counter */
+
+void SysTick_Handler(void) {
+  msTicks++;                                     /* increment timeTicks counter */
+}
+
+__INLINE static void Delay (uint32_t dlyTicks) {
+  uint32_t curTicks = msTicks;
+
+  while ((msTicks - curTicks) < dlyTicks);
+}
+
+__INLINE static void LED_Config(void) {
+  ;                                              /* Configure the LEDs */
+}
+
+__INLINE static void LED_On (uint32_t led) {
+  ;                                              /* Turn On  LED */
+}
+
+__INLINE static void LED_Off (uint32_t led) {
+  ;                                              /* Turn Off LED */
+}
+
+int main (void) {
+  if (SysTick_Config (SystemCoreClock / 1000)) { /* Setup SysTick for 1 msec interrupts */
+    ;                                            /* Handle Error */
+    while (1);
+  }
+  
+  LED_Config();                                  /* configure the LEDs */                            
+ 
+  while(1) {
+    LED_On (0x100);                              /* Turn  on the LED   */
+    Delay (100);                                 /* delay  100 Msec    */
+    LED_Off (0x100);                             /* Turn off the LED   */
+    Delay (100);                                 /* delay  100 Msec    */
+  }
+}
+ + + \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/License.doc b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/CMSIS/License.doc new file mode 100644 index 0000000000000000000000000000000000000000..b6b8acecc137bca709444106cba045d3d01daedd GIT binary patch literal 39936 zcmeI53w&Hvz3*2ZZBuBVr4Jqg-IP)q2qBafkZ1Flwy9}S@}SfrFqxSo(8g!^moP(odvq z?1-P~rSnWxy)k$1Uu5y=1Ks4`kH|Iruxr=e*@t}heulg3&0El=OJVTdj~gA%QG|Cj zO)+Lpu`#RnaU+7^2}E5={8@zmi%^7jOmp+yxSuhvaXWRk`>gP6Zlm7w=Y;hFFQKlHfxaQ}ERf8S{OfPon%>RWR!E`Qf)aD%tq)`9jqjy!`t7(C??8 zN6#+|{a z7IHL08H+OOzPDoR@5VzOOM$dFX^6)r68iU4Fg?y;)TbzaJ;w zfA-UD=0C%aU$0-4&mXn(2YTc4*$@5p{bxV)%jXOIe4|5O9{n(1c|ZOc=#m^xbd7Gu zfA;z8Kj#bm`hEQn3@<~+{E9)35(eW{#(!42uD!^k`MrctL%f<0wU(VHKEEdlwYX3W z-7+I9V|p%J1rF>!2i7P1Q%++%5=%s4PA2KJrwO`aPAl=m)Fq=aC!B~nt$ndbyfYpN zXX43()0s@!Ty@D*Cbq>{6OW{lkz^v1O7`@`QWWmY41`lLry-Gvr8>h@)S97|a4LFY zd3oEahE^xkRPVI6hFYA)hPqHwUC60f*%At^2{pAjq}Di%p_Mg_fyl+zdl|P?IJKd+ zb)is`v%b0ASsZF;TSYZBPHRKc%Epk>&{W@WMnipjO=G3g+~UW&)lqvx+xiNphQ@1J z*3kBvhPF_>vv>hd3o4uy6reT{<}|Ocx2?_XEl^k2Tn~v9Yh4?vYgo}xSJT$e+~m~M z)itkKThp|jw#g3V9+g#&ZGed8rpEQox`xI^o2A*!K>ccG{L0&!Z4YUtu9;5R2HRHE zwAol%4y|o-Y8o4TO4~v$Yg+04C^~A_J9QBC5jB5(gUiuv;tUB5O|5Ozpd=!i#mIFH z(AF+qDypt|t?in}WR)VQ>1Yg>?)HYB1Y)Yjgjv6_SwAe>cBdHMB$Il0a0jfE3wI|wV_iv}DxJ|Jq`SjCJx(H-apH+cPd`0e9Ivp2 z;=O%6vEEoB<7%X2r;|i)rJTP0j-GhBI~H})L88-6D%KfGNzFy6%T_U>yC+dIRfiLU zPAn0o4iOiNbSIKM$*y=ztPW?K-teH)5pxo;NGzQWrv{}md&8Sz4hpd!)v4lrsbsW2 zl2KG2`ce8)l*J&?))7fUx@r_7#u8HLbo6H&X-{>VlD+9z&t|g6w)CZFwP(;t$1)lO zO52{q)1%b$;#gHzm7{jzQpcSsR5QJbrYnhrhh4EmEEUcqQ$%!xBb&Umo_I$poDyY_ z?sC(wqtXed)3M$TRYxM+*~DFtKPNex!#(k+HySA?8tdrqa?<`vK%s8bzgC5loNylu zaF-G&NcM>s@jE@3&cu4vKr|KKOap%Llbn`@);gFH>5kKAreC$dXN>~6d$s-q6D#a! zGMv5P^rnGiYE#-SVtw6%Y1-{^dcuRr{tW%>goBw_7wsb!k$5W7AJ0H~I^LB?pCm#S z$2V6vEp3g%Ea{GSbvr$=&9NRtN+aUS-~`n%!OH!`Ze>eNQ(J5KF)S0U{T&!|xWY*eB`cXC2o)m|OQezfm_xl<9wnc!$>|FZYNDx;{zSO5 zGu{)o{K|C4Q&CcpacGp4u(+ebiBSq75SC;#?oKu@inclsD_7*lvo9oVzK}oq!ov8InkN-=GR)6$F&|m1#1josM`yQ&%izL>aK$-GP)72AS3N+YE1V}@Z!qhG|nN+*>Z4EMlpakkPy{(7PVaps+6v9+^K zEJu$`cQporCz3V#BQ#Q0&-V4F`jRLYq%|tJOZHh^*&W`jN#jMuqLoN{q91FE=@HB@ z9IHIZPRLX_ScPJtJNmWx)BViLL8ZYyJO2mbG#iblGpRUANhzLkLwR+_Bi&ZVAUnA= z*-3OVUU7$e(N}4ozCp-DFggdVz@(+EJ>zqf)w!7A^_Dh~tw&<(uXum2 zOsaIJd=z=Mvs2U9YL(PxmJ=2~@hpYT$!I-*S7`*-E``JE*zjDEov;M0(l&~jV@-H1 zFs=&lX1k^gn#5HDEDd&il#3yk&V@j74pY+;9&q#6d6ck2k?zMd*M zrqXKCaOAxHxLt!C%lt|w6VIR;#U<&DSXw5@#HvgM^6TTQl9bAf#S>L{O!UHGmZOYZ z<41bIn=S%3=4?M1;ecHtGK@(w6|+oLbB3vA#n^B)ZkIIF7UiLFS-?fz*$$* zqBXoBge!aI+LlmjYo*h$W^H2wrQ`*))wH#@HMguMwyCbMy&i|E5;w37H=xb+JFN#< zX({px1}eo5S`%uiTSXf+wGEB9t(8tIMOs(X)Tv(QbUa)e+tl3D(6pk323+@<)>kyN zH9?W}XKS3bH7#uob?uEcEza8ZmbJ~Tp-C}9j*m-w$O*NyG`F;RY@oBDmNV$MnAy^> za#fpLIsuJswHR(4#tD;#I)%KUQ8ylgQH<&pN*Kz9<8T8o5h zd1vP+=6>c4WbF{w? zS10U5dcyJE>|%xqO<`0IdeCP<1xBO#D^qmXu7i2QHrp7YtZEESXqosG&Vp>E3p|%t zbWwL4p8H!;*1GW@AQZI+O|Fi>_UnagFV$TNu=ebj$pn!-rQF=IKvg=M7=4>QFhB(Ezd01)hM7RMvJ$qUxSO&mCRh3W?u0ScFLs>xw~6 zr>r=)MbQ@PV)3QPa1?g5dAkD%zf(}&i;b&+p?DN~ zEu89zb89Oexy*N6;cr5Z~NOO^(1jBrsPB2P<8 z50-l@C38l$y`&?Sip1giAnsl`oz&g{3GxBFCRF19`vP(%{Y{D7tsw5363~eUEN4ls zWr)FMyF#*MBSqRqq$(YaN9@*tJH@j3B1|OogsXkzN82q3*@+zU4mU?w2DDz?j3aNdpLvhvULhXC!s;OSYtM1$} zX^0;7#oPK9vdJOdZuCfs$N2pT1c;p~_Mkd#*J!{O{7Lj>TQFTDD;x&Ov^V{ zCs=8$E>Nf7WDbh6f-how!&~CL{k_y;RTmT{2V5oZ?K5dhgZae<%<&#;$0ydxudLFs zR-^++!PUiLtOCEZuQdNyf|?UUoYy5@%`iG>v*avVOZ+#AI?eqqGsi zIKQZ8 zTJ9`}Mx8ZWxaM37oU@LQbF?zV`?@t)@pGz=L$ztq`LZqxzndlpY7B)*WnJV z4YjnbcNWwk@BNHYlO<$m{UO?I1i*i8hiyj1QzXK%rbEIp2mC?+zY+| zUjFgR-@5DitsA$l+q&X}!$p`gxBJ$zkD7Vivris0b*uL=&8v&e>ELV-=Gh!Dulvhq zY|EWSX{C*m{q2F|Yfe;&oA8IIum2K;+aF5mOR8}FjFmx5(} z5PbM%@Zo{H51$XFjCcqp1n=QR$-u%s*cwSgmz z;anlP?DJOhm@#mY=e;jGuz1#GzkK^_!gC32`kNKo?V+YX`p82H)YyHY40p?ZstAe!qC>1tRF&;Xv zTT^D-Jggv^CP4-3SEAKLVxBV%9e(@;r=T0#omX<_pmgcQFXm3mmd;y$R;Me+s2+@6 z0jN(Ca2$G}ChsarTk3_|mkHaVrhIGeEREe)!G8e{g0F+e!H>Ydfqw^o1kIcZUkhR& z13nIJ05^g!fv7*>25~FJ5rw z__fiZte{cSF_IVNAdN*DWI#W-0DKDE0{%O=mUVs`coIAX{sm;$f9_ufe**s>%*P&B z0PX{ig6{y?2s?kd^XZ+B?R@$hPv8CYV>f+bAiiPshSmHGkL}32?A*|DnR70~=}({Y z^So)lKKa{u)AH6i8Qnu3l^>U<(6(kpYu@%H1^N1vSF*Ak$(w^#mt?+?x8}R{cqV7s zej1-SoTQ!$_64VbCeRGR;5G0DXv4-k2b>4e;0ACHxDPxHehPj8ehpp)vI*Y+zXxxD zU0@a`-46qcz~Nvi*aU6@H-lTiz2H&sZSc?F8Sv_}+h2X?)jMB(_SI+Yk8WPw{_IuH zUUlbH7kK|VFX+4~JAXE;`0V&hivCtKTuvxwRxapOt_d7eDvt_kx@xcX7gg!E)7 zpRhKwSo|&HIQjwLXfTbxJ}Cp!!CG)SXa{G30dPLJ99#je2KR!Oz#HHl@cIj{KmPE2 zw|(ZKzS}Ok?K9`x)^yP+BPVzEDJ#<(KK!$svN^1AkDhhj1UY`aWJm5C6KIOO+8|5a zU9*qOU2`@^-c_2mrKR)D_Iy6-aKH2Bn54u_C@E&P=BdWJ>|kTApU?O?#{3pE;}fg} zr-M&|E5WCLe1)sPXTde#T5vts25tm5frIfS=7SyCvF7HL;KOslhY=|w9{wemZN$Tf zZ13jb$zav*;{*QQ@b&2MZT7BoZ_^dM;iF5;9($Ye?PaET+pNWh78Sd3_RlLv`*3+Z zJ_*|x4=-`C*aU6{KLalUhrdWW1bhsf4L%QU2mc$q1PJ&&_F^6Ck+z{FbS6X^>ks6Vfk$x@J4 zk3zveCzs`{-x2>G1&1;BD?k`r3#1Ef0;f2}EC&r>JxGHL_^;rfz-z$Q89TXu6TJG9 zNBQ@)&+Fe+{JU_|$5xt2UF^xpd&=(>1@`3VRbF2#%M(qkoccGL<42YMBX15@I`WPz zb+|dk8yh!AUP`ml`e&5uY@KR*T&u*)(RdXff(`)ZEx`T{vm+|MI_H=pF(0kZ?-_h+_G@{|iIX|& z%(j|W(#Dfh`Xb3NyCe7PZWk?z=A6r)fMd02hL-KzqUZ z+y4>U!N1q^^snFgHws5&8}aa~V79{j`_6%YrD%8eOK1AF<;*;`tJ=!`#X08+y8pYy`+*tPe7E=mG*lmuu3la|*X)Cvc`L6aOS63*zRN}x zZVDWDA33lbQ}K7Zip_E}BP)DUO_NEQl<75L(?i=*Kl@=E?PtzeRa6=#>|HgzEDbVX zEOGUwX8F!tUoiD%#uPtw9#1jTNsax~nK6!8%Y6!T+220XP239FO^~Xq#l+3;cYU33 zxRx2FjS?Ny5F__UDi1XKzKMIX^rurz(HVG zAOW_5!RhRxajNRa2*lHR3(s5j47+u|0jj@@o!RU6Wp{;L`QL(OcGcE`)4?afmEcq0 zCU7wQaKHsXJ8zmQDTnVcNfID0drv#r`(S*&duZIP{BR?ipT1}B>3{Y<*jBzgLHe25 z*|MBK$leF*4BiLp&q4oH_m1L8F#o%}SDnQ<%G$OVj=!`_=u2!@fzN_#z_s9dunpV@ ze3_Xakeds+-|ETF&CqN=Mx}7bgYLNsX)YfMeDV13L6Hegwb*NjU%|bK#+eT#|0rpD zS9`r3A{5-q_B~J9czVL}W#%|_=1Ci;&Y_Z9e5w=<2`>&*nOn@c_MO=KuY-eY@_W_4 zwlBH)GwuCI+xTfyJopme;{F4&M1!Ze9=B zn|2pOJ=usO`7OCFx{>-cG;ixNi@&Q?0iWnxD8v zMss*SAYCP$gjs9k`cTC1;@TVnRJTsJ=q-oJY94Y>!8kx^defnKEBZbRJ_4G-Mc`WS zIdCVq3)~GJ0{;ZQ34RUq9z=bZJukEChN0Q*_V*C`d%$oE9oumNxoC2SC@#jM!3VK^ zqqMD{=jG<$-)RE4-}l^QhK7dpcNH^n?TdF@N5V`~wnO_Iwh(h;Z&R{E63o`!4z?1A zpT5JNK|E%!VzY-WXDBm;Smm!J+{cSABA!15!P(w(huHTB4a_u8s2PJNY|2b&iH7sE zk|NvotQ{&~lL?b>{t|F0xB_VLlY{XLcpe#a+_;Nrgwr6@ z4TtY(NaS1h_uaN~;w0M80G$f@JY0=zT?a0rCl>>`-0Gpf#QSbmK37XzcosYdd~V29 zAI%ZD?mjn4=;=s^BgGTI<(l%byTIj-i#7yY-VP8e9!iG(4d~horqF4$_tAM^OYZ1eK@b4)|~T=O-~R9}7Ee&(qI_BZoW2bv9==bLjY9rMTehnPb)Ei}cv zK|FuO;pWAXBaBW<=-lDG$!fb*^@~%EHT$nS*60Mv_YXMHJkxoy(K-A#SJasM!YfQI zf3$Vil+{LWt98moXJ_@-PKow)M(1)uQ`Z}923=aZ!E88TgPGd3!9>qL+vvQ++_S>w zbG02t@53+LZTg_xV)mW9H3;+l@|y>&)+~XMNA;&5qvh zu0H#5^U8)FnR{!VG9_pH*tB2twE5-v|7wnQerj}5_jKo36FL4_qZ2(Z)x2o*R|z_S zaAfx{%qe^P%IN&M-XZJ6LVM$D=IQd+%}e#K8=ZpeDEXb4y5%kNO3&M-YVj^R#&@Ha zwH0+Un#kWavfD(YY8DF>33RV_?OJYz{Ml{HnIAe~&*3LO4=T%7HQGg6E{(yDcFrVj z?d}-0e}wiFu~vF=e0J&+K@r zm@mKEEaxnJ;&S1|6F;+}*bYxEENNhx7E4c4qGaZ=gd<}WqwA0oW0wK9H8-yCJ6R5t zO}k^tL#*_dTypSI{ej&6_N(o(GPa_^h26PEj{!sMU1i69{5*}5FVBAb$Z*w}dY-;x z*WN6>ry280Q2`Z`|JORie0<>30`B?BYpiyuKTtj!mLRc{W|Qn zC;4q>Hn~sTHf&`%jFH2gY1+|mV6ODp_aB;jdRGz#aY`rbOic2QMYXx*LuQMuzb~7| zrEHqHkobFfC-M@KU60;KP_N$kXjY|t@(bbn#({Uxx~Rr6^%oKI(kE`;`KRXYnfF{< zW{y1k>(5ma_b>^PBc-aDs@ymf(@ts2zEZ5JXvv)TC?7Kzw{?27d z{a+@6_ZkE7L7`R#g<3Nd`t)&IxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>K7bs^ z=l{!(EdI$4e{yTphh|=X6aIhYpYE$CZpx^*K78*=Ab*{J{T|mx?^9kd1hfb6Nx-2- za}Cg&JMA6F*S`bEm;VZoFMmJK+r9q=pY7_V5-K*zq`u_%4TGWR6CBEpY28z=w7?rpP zh~`^>{Piz;&q~w2$H-3@+N@%sAKlnuOVNBb%KHSNt=-=p(L2zw-#T>ZRjYjQFuQA^ z4;2zsxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>{_Z&-|5N^@{7!j)@=fKn>V3U@ zY`v$~yLma9^26nm%g2^KDo;~Bz24!=cb8|W)3oy6N1x8ssaqYL;i#DPF6R?E;1I9? zyu$&Og@lKJMc{C-7*v2Gz>%O590jU?+*0|^#{iX;|Icw9vkV*ujt3_Io$6KkNrWeZ zQ^2W!qcmnYr~yiU8`OLEdKNwimrly*?|~f?vZr`boPyh(YaXXZd_GBrrcReMx%)N* zE9`^!^VFQxm*~ubB8R-VW9(@-_b;ivsND+o;_oiizT{TnWC|ZjrU$)qTMTBZw*JR68N!YliaPCm8>a?PG-@qtzTACE&pQv*4=K5Vs z`{H;hm~8txd*YveoHC~8yGPFn9{+9UC)t0UTl3p5GIjJ;XUUrRTkVZX*{y3Iw3pxZ zWc#lM&fBe4#?Sn2+8@8h-AjEh?Mrq)D7r4lr^3C zU;jHIYZ|O+)p<3d?3~tpm7iX9g89RTAN+I9wcVQ;h1?Ty;4iuU4^_6tk7NCBgs4Yd zGXeW;_)97i(V8p0u>QZd^_G g!+ZG+YJlCX=dW%57tSBCAIe6m^l&ZsOP@db55$o82LJ#7 literal 0 HcmV?d00001 diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/Release_Notes.html b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/Release_Notes.html new file mode 100644 index 00000000..633e42e3 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/Release_Notes.html @@ -0,0 +1,342 @@ + + + + + + + + + + + + +Release Notes for STM32F10x Standard Peripherals Library Drivers + + + + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F10x Standard Peripherals Library Drivers +(StdPeriph_Driver)

+

Copyright 2011 STMicroelectronics

+

+
+

 

+ + + + + + +
+

Contents

+
    +
  1. STM32F10x Standard Peripherals Library +Drivers update History
    2. +
  2. License
    3. +
+ + +

STM32F10x Standard +Peripherals Library Drivers  update History


+

V3.5.0 / 11-March-2011

+

Main +Changes

+ +
    +
  • stm32f10x_can.h/.c files:
    • +
      +
    • Add 5 new functions
      • +
        +
      • 3 +new functions controlling the counter errors: CAN_GetLastErrorCode(), +CAN_GetReceiveErrorCounter() and CAN_GetLSBTransmitErrorCounter().
        • +
      +
        +
      • 1 new function to select the CAN operating mode: CAN_OperatingModeRequest().
        • +
      +
        +
      • 1 new function to support CAN TT mode: CAN_TTComModeCmd().
        +
        • +
      +
    • CAN_TransmitStatus() function updated to support all CAN transmit intermediate states
      +
      • +
    +
  • stm32f10x_i2c.h/.c files:
    • +
      +
    • Add 1 new function:
      • +
        +
      • I2C_NACKPositionConfig(): +This function configures the same bit (POS) as I2C_PECPositionConfig() +but is intended to be used in I2C mode while I2C_PECPositionConfig() is +intended to used in SMBUS mode.
        • +
      +
    +
  • stm32f10x_tim.h/.c files:
    • +
      +
    • Change the TIM_DMABurstLength_xBytes definitions to TIM_DMABurstLength_xTansfers
      +
      • +
    + + +
+ +

3.4.0 +- 10/15/2010

+ +
    +
  1. General
    2. +
+ +
    +
  • Add support for STM32F10x High-density value line devices.
    • +
+ +
    +
  1. STM32F10x_StdPeriph_Driver
    2. +
+ + +
    + +
  • stm32f10x_bkp.h/.c
    • +
      +
    • Delete BKP registers definition from stm32f10x_bkp.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_can.h/.c
    • +
      +
    • Delete CAN registers definition from stm32f10x_can.c and use defines within stm32f10x.h file.
      +
      • +
    • Update the wording of some defines and Asserts macro.
      +
      • +
    • CAN_GetFlagStatus() +and CAN_ClearFlag() functions: updated to support new flags (were not +supported in previous version). These flags are:  CAN_FLAG_RQCP0, +CAN_FLAG_RQCP1, CAN_FLAG_RQCP2, CAN_FLAG_FMP1, CAN_FLAG_FF1, +CAN_FLAG_FOV1, CAN_FLAG_FMP0, CAN_FLAG_FF0,   CAN_FLAG_FOV0, +CAN_FLAG_WKU, CAN_FLAG_SLAK and CAN_FLAG_LEC.
      +
      • +
    • CAN_GetITStatus() +function: add a check of the interrupt enable bit before getting the +status of corresponding interrupt pending bit.
      +
      • +
    • CAN_ClearITPendingBit() function: correct the procedure to clear the interrupt pending bit.
      +
      • +
    +
  • stm32f10x_crc.h/.c
    • +
      +
    • Delete CRC registers definition from stm32f10x_crc.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dac.h/.c
    • +
      +
    • Delete DAC registers definition from stm32f10x_dac.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dbgmcu.h/.c
    • +
      +
    • Delete DBGMCU registers definition from stm32f10x_dbgmcu.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_dma.h/.c
    • +
      +
    • Delete DMA registers definition from stm32f10x_dma.c and use defines within stm32f10x.h file.
      • +
    • Add new function "void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);"
      +
      • +
    +
  • stm32f10x_flash.h/.c
    • +
      +
    • FLASH functions (Erase and Program) updated to always clear the "PG", "MER" and "PER" bits even in case of TimeOut Error.
      • +
    +
  • stm32f10x_fsmc.h/.c
    • +
      +
    • Add new member "FSMC_AsynchronousWait" in "FSMC_NORSRAMInitTypeDef" structure.
      • +
    +
  • stm32f10x_gpio.h/.c
    • +
      +
    • GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for TIM6, TIM7 and DAC DMA requests, TIM12 and DAC Triggers / DMA2_Channel5 Interrupt mapping.
      • +
    +
  • stm32f10x_pwr.h/.c
    • +
      +
    • Delete PWR registers definition from stm32f10x_pwr.c and use defines within stm32f10x.h and core_cm3.h files.
      • +
    +
  • stm32f10x_rtc.h/.c
    • +
      +
    • Delete RTC registers definition from stm32f10x_rtc.c and use defines within stm32f10x.h file.
      • +
    +
  • stm32f10x_spi.h/.c
    • +
      +
    • Add new definition for I2S Audio Clock frequencies "I2S_AudioFreq_192k".
      • +
    +
  • stm32f10x_tim.h/.c
    • +
    • Add new definition for TIM Input Capture Polarity "TIM_ICPolarity_BothEdge".
    + +
+ +

3.3.0 +- 04/16/2010

+ +
  1. General
+
  • Add support for STM32F10x XL-density devices.
  • I2C driver: events description and management enhancement.
+
  1. STM32F10x_StdPeriph_Driver
+
  • stm32f10x_dbgmcu.h/.c
    • DBGMCU_Config() function: add new values DBGMCU_TIMx_STOP (x: 9..14) for DBGMCU_Periph parameter.
  • stm32f10x_flash.h/.c: +updated to support Bank2 of XL-density devices (up to 1MByte of Flash +memory). For more details, refer to the description provided within +stm32f10x_flash.c file.
  • stm32f10x_gpio.h/.c
    • GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for FSMC_NADV pin and TIM9..11,13,14.
  • stm32f10x_i2c.h/.c: I2C events description and management enhancement.
    • I2C_CheckEvent() +function: updated to check whether the last event contains the +I2C_EVENT  (instead of check whether the last event is equal to +I2C_EVENT)
    • Add +detailed description of I2C events and how to manage them using the +functions provided by this driver. For more information, refer to +stm32f10x_i2c.h and stm32f10x_i2c.c files.
  • stm32f10x_rcc.h/.c: updated to support TIM9..TIM14 APB clock and reset configuration
  • stm32f10x_tim.h/.c: updated to support new Timers TIM9..TIM14.
  • stm32f10x_sdio.h: 
    • SDIO_SetSDIOReadWaitMode() function: correct values of SDIO_ReadWaitMode parameter
      change
        +#define +SDIO_ReadWaitMode_CLK               +  ((uint32_t)0x00000000)
        #define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000001)
      by
        #define +SDIO_ReadWaitMode_CLK               +  ((uint32_t)0x00000001)
        #define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000000)
+

3.2.0 +- 03/01/2010

+
    +
  1. General
    2. +
+
    + +
  • Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices.
    • +
  • Almost +peripherals drivers were updated to support Value +line devices features
    • +
  • Drivers limitations fix and enhancements.
    • + +
+
    +
  1. STM32F10x_StdPeriph_Driver
    2. +
+
    +
  • Add new +firmware driver for CEC peripheral: stm32f10x_cec.h and stm32f10x_cec.c
    • +
  • Timers drivers stm32f10x_tim.h/.c: add support for new General Purpose Timers: TIM15, TIM16 and TIM17.
    • +
  • RCC driver: add support for new Value peripherals: HDMI-CEC, TIM15, TIM16 and TIM17.
    • +
  • GPIO driver: add new remap parameters for TIM1, TIM15, TIM16, TIM17 and HDMI-CEC: GPIO_Remap_TIM1_DMA, GPIO_Remap_TIM15, GPIO_Remap_TIM16, GPIO_Remap_TIM17, GPIO_Remap_CEC.
    • +
  • USART +driver: add support for Oversampling by 8 mode and onebit method. 2 +functions has been added: USART_OverSampling8Cmd() and +USART_OneBitMethodCmd().
    +
    • +
  • DAC +driver: add new functions handling the DAC under run feature: +DAC_ITConfig(), DAC_GetFlagStatus(), DAC_ClearFlag(), DAC_GetITStatus() +and DAC_ClearITPendingBit().
    • +
  • DBGMCU driver: add new parameters for TIM15, TIM16 and TIM17: DBGMCU_TIM15_STOP, DBGMCU_TIM16_STOP, DBGMCU_TIM17_STOP.
    +
    • +
  • FLASH +driver: the FLASH_EraseOptionBytes() function updated. This is now just +erasing the option bytes without modifying the RDP status either +enabled or disabled.
    • +
  • PWR +driver: the PWR_EnterSTOPMode() function updated. When woken up from +STOP mode, this function resets again the SLEEPDEEP bit in the +Cortex-M3 System Control register to allow Sleep mode entering.
    • + + +
+

License

+

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

+

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

+

 

+
+
+

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/misc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/misc.h new file mode 100644 index 00000000..7d401ca9 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/misc.h @@ -0,0 +1,220 @@ +/** + ****************************************************************************** + * @file misc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MISC_H +#define __MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/** @defgroup MISC_Exported_Types + * @{ + */ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete STM32 Devices IRQ Channels list, please + refer to stm32f10x.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup NVIC_Priority_Table + * @{ + */ + +/** +@code + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ +@endcode +*/ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup Vector_Table_Base + * @{ + */ + +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup Preemption_Priority_Group + * @{ + */ + +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) + +/** + * @} + */ + +/** @defgroup SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Functions + * @{ + */ + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h new file mode 100644 index 00000000..d1b2653a --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h @@ -0,0 +1,483 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the ADC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_ADC_H +#define __STM32F10x_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/** @defgroup ADC_Exported_Types + * @{ + */ + +/** + * @brief ADC Init structure definition + */ + +typedef struct +{ + uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or + dual mode. + This parameter can be a value of @ref ADC_mode */ + + FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in + Scan (multichannels) or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ + + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted + using the sequencer for regular channel group. + This parameter must range from 1 to 16. */ +}ADC_InitTypeDef; +/** + * @} + */ + +/** @defgroup ADC_Exported_Constants + * @{ + */ + +#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC2) || \ + ((PERIPH) == ADC3)) + +#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC3)) + +/** @defgroup ADC_mode + * @{ + */ + +#define ADC_Mode_Independent ((uint32_t)0x00000000) +#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000) +#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000) +#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000) +#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000) +#define ADC_Mode_InjecSimult ((uint32_t)0x00050000) +#define ADC_Mode_RegSimult ((uint32_t)0x00060000) +#define ADC_Mode_FastInterl ((uint32_t)0x00070000) +#define ADC_Mode_SlowInterl ((uint32_t)0x00080000) +#define ADC_Mode_AlterTrig ((uint32_t)0x00090000) + +#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ + ((MODE) == ADC_Mode_RegInjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ + ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ + ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ + ((MODE) == ADC_Mode_InjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult) || \ + ((MODE) == ADC_Mode_FastInterl) || \ + ((MODE) == ADC_Mode_SlowInterl) || \ + ((MODE) == ADC_Mode_AlterTrig)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_None) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) +/** + * @} + */ + +/** @defgroup ADC_data_align + * @{ + */ + +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + +/** @defgroup ADC_channels + * @{ + */ + +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ + ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ + ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ + ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ + ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ + ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ + ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ + ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ + ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) +/** + * @} + */ + +/** @defgroup ADC_sampling_time + * @{ + */ + +#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00) +#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01) +#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02) +#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03) +#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04) +#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05) +#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06) +#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07) +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ + ((TIME) == ADC_SampleTime_7Cycles5) || \ + ((TIME) == ADC_SampleTime_13Cycles5) || \ + ((TIME) == ADC_SampleTime_28Cycles5) || \ + ((TIME) == ADC_SampleTime_41Cycles5) || \ + ((TIME) == ADC_SampleTime_55Cycles5) || \ + ((TIME) == ADC_SampleTime_71Cycles5) || \ + ((TIME) == ADC_SampleTime_239Cycles5)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) +/** + * @} + */ + +/** @defgroup ADC_injected_channel_selection + * @{ + */ + +#define ADC_InjectedChannel_1 ((uint8_t)0x14) +#define ADC_InjectedChannel_2 ((uint8_t)0x18) +#define ADC_InjectedChannel_3 ((uint8_t)0x1C) +#define ADC_InjectedChannel_4 ((uint8_t)0x20) +#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ + ((CHANNEL) == ADC_InjectedChannel_2) || \ + ((CHANNEL) == ADC_InjectedChannel_3) || \ + ((CHANNEL) == ADC_InjectedChannel_4)) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ + +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) + +#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_None)) +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition + * @{ + */ + +#define ADC_IT_EOC ((uint16_t)0x0220) +#define ADC_IT_AWD ((uint16_t)0x0140) +#define ADC_IT_JEOC ((uint16_t)0x0480) + +#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00)) + +#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ + ((IT) == ADC_IT_JEOC)) +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @{ + */ + +#define ADC_FLAG_AWD ((uint8_t)0x01) +#define ADC_FLAG_EOC ((uint8_t)0x02) +#define ADC_FLAG_JEOC ((uint8_t)0x04) +#define ADC_FLAG_JSTRT ((uint8_t)0x08) +#define ADC_FLAG_STRT ((uint8_t)0x10) +#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00)) +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ + ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ + ((FLAG) == ADC_FLAG_STRT)) +/** + * @} + */ + +/** @defgroup ADC_thresholds + * @{ + */ + +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_offset + * @{ + */ + +#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_length + * @{ + */ + +#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) + +/** + * @} + */ + +/** @defgroup ADC_injected_rank + * @{ + */ + +#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) + +/** + * @} + */ + + +/** @defgroup ADC_regular_length + * @{ + */ + +#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) +/** + * @} + */ + +/** @defgroup ADC_regular_rank + * @{ + */ + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) + +/** + * @} + */ + +/** @defgroup ADC_regular_discontinuous_mode_number + * @{ + */ + +#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions + * @{ + */ + +void ADC_DeInit(ADC_TypeDef* ADCx); +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); +void ADC_ResetCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_StartCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); +uint32_t ADC_GetDualModeConversionValue(void); +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); +void ADC_TempSensorVrefintCmd(FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h new file mode 100644 index 00000000..b620753e --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h @@ -0,0 +1,195 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the BKP firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_BKP_H +#define __STM32F10x_BKP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup BKP + * @{ + */ + +/** @defgroup BKP_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Constants + * @{ + */ + +/** @defgroup Tamper_Pin_active_level + * @{ + */ + +#define BKP_TamperPinLevel_High ((uint16_t)0x0000) +#define BKP_TamperPinLevel_Low ((uint16_t)0x0001) +#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \ + ((LEVEL) == BKP_TamperPinLevel_Low)) +/** + * @} + */ + +/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin + * @{ + */ + +#define BKP_RTCOutputSource_None ((uint16_t)0x0000) +#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080) +#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100) +#define BKP_RTCOutputSource_Second ((uint16_t)0x0300) +#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \ + ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \ + ((SOURCE) == BKP_RTCOutputSource_Alarm) || \ + ((SOURCE) == BKP_RTCOutputSource_Second)) +/** + * @} + */ + +/** @defgroup Data_Backup_Register + * @{ + */ + +#define BKP_DR1 ((uint16_t)0x0004) +#define BKP_DR2 ((uint16_t)0x0008) +#define BKP_DR3 ((uint16_t)0x000C) +#define BKP_DR4 ((uint16_t)0x0010) +#define BKP_DR5 ((uint16_t)0x0014) +#define BKP_DR6 ((uint16_t)0x0018) +#define BKP_DR7 ((uint16_t)0x001C) +#define BKP_DR8 ((uint16_t)0x0020) +#define BKP_DR9 ((uint16_t)0x0024) +#define BKP_DR10 ((uint16_t)0x0028) +#define BKP_DR11 ((uint16_t)0x0040) +#define BKP_DR12 ((uint16_t)0x0044) +#define BKP_DR13 ((uint16_t)0x0048) +#define BKP_DR14 ((uint16_t)0x004C) +#define BKP_DR15 ((uint16_t)0x0050) +#define BKP_DR16 ((uint16_t)0x0054) +#define BKP_DR17 ((uint16_t)0x0058) +#define BKP_DR18 ((uint16_t)0x005C) +#define BKP_DR19 ((uint16_t)0x0060) +#define BKP_DR20 ((uint16_t)0x0064) +#define BKP_DR21 ((uint16_t)0x0068) +#define BKP_DR22 ((uint16_t)0x006C) +#define BKP_DR23 ((uint16_t)0x0070) +#define BKP_DR24 ((uint16_t)0x0074) +#define BKP_DR25 ((uint16_t)0x0078) +#define BKP_DR26 ((uint16_t)0x007C) +#define BKP_DR27 ((uint16_t)0x0080) +#define BKP_DR28 ((uint16_t)0x0084) +#define BKP_DR29 ((uint16_t)0x0088) +#define BKP_DR30 ((uint16_t)0x008C) +#define BKP_DR31 ((uint16_t)0x0090) +#define BKP_DR32 ((uint16_t)0x0094) +#define BKP_DR33 ((uint16_t)0x0098) +#define BKP_DR34 ((uint16_t)0x009C) +#define BKP_DR35 ((uint16_t)0x00A0) +#define BKP_DR36 ((uint16_t)0x00A4) +#define BKP_DR37 ((uint16_t)0x00A8) +#define BKP_DR38 ((uint16_t)0x00AC) +#define BKP_DR39 ((uint16_t)0x00B0) +#define BKP_DR40 ((uint16_t)0x00B4) +#define BKP_DR41 ((uint16_t)0x00B8) +#define BKP_DR42 ((uint16_t)0x00BC) + +#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \ + ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \ + ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \ + ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \ + ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \ + ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \ + ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \ + ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \ + ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \ + ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \ + ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \ + ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \ + ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \ + ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42)) + +#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Functions + * @{ + */ + +void BKP_DeInit(void); +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel); +void BKP_TamperPinCmd(FunctionalState NewState); +void BKP_ITConfig(FunctionalState NewState); +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource); +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue); +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data); +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR); +FlagStatus BKP_GetFlagStatus(void); +void BKP_ClearFlag(void); +ITStatus BKP_GetITStatus(void); +void BKP_ClearITPendingBit(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_BKP_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h new file mode 100644 index 00000000..648f747c --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h @@ -0,0 +1,697 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CAN firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CAN_H +#define __STM32F10x_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/** @defgroup CAN_Exported_Types + * @{ + */ + +#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ + ((PERIPH) == CAN2)) + +/** + * @brief CAN init structure definition + */ + +typedef struct +{ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of + @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of + @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit + Segment 2. + This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered + communication mode. This parameter can be set + either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off + management. This parameter can be set either + to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or + DISABLE. */ + + FunctionalState CAN_NART; /*!< Enable or disable the no-automatic + retransmission mode. This parameter can be + set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE + or DISABLE. */ + + FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE + or DISABLE. */ +} CAN_InitTypeDef; + +/** + * @brief CAN filter init structure definition + */ + +typedef struct +{ + uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/** + * @brief CAN Rx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /*!< Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/** + * @} + */ + +/** @defgroup CAN_Exported_Constants + * @{ + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ + +/** + * @} + */ + +/** @defgroup CAN_Mode + * @{ + */ + +#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ + ((MODE) == CAN_Mode_LoopBack)|| \ + ((MODE) == CAN_Mode_Silent) || \ + ((MODE) == CAN_Mode_Silent_LoopBack)) +/** + * @} + */ + + +/** + * @defgroup CAN_Operating_Mode + * @{ + */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ + + +#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ + ((MODE) == CAN_OperatingMode_Normal)|| \ + ((MODE) == CAN_OperatingMode_Sleep)) +/** + * @} + */ + +/** + * @defgroup CAN_Mode_Status + * @{ + */ + +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ + + +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width + * @{ + */ + +#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ + +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ + ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 + * @{ + */ + +#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ + +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 + * @{ + */ + +#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ + +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) + +/** + * @} + */ + +/** @defgroup CAN_clock_prescaler + * @{ + */ + +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) + +/** + * @} + */ + +/** @defgroup CAN_filter_number + * @{ + */ +#ifndef STM32F10X_CL + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) +#else + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup CAN_filter_mode + * @{ + */ + +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ + ((MODE) == CAN_FilterMode_IdList)) +/** + * @} + */ + +/** @defgroup CAN_filter_scale + * @{ + */ + +#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ + +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ + ((SCALE) == CAN_FilterScale_32bit)) + +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO + * @{ + */ + +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ + ((FIFO) == CAN_FilterFIFO1)) +/** + * @} + */ + +/** @defgroup Start_bank_filter_for_slave_CAN + * @{ + */ +#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) +/** + * @} + */ + +/** @defgroup CAN_Tx + * @{ + */ + +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) + +/** + * @} + */ + +/** @defgroup CAN_identifier_type + * @{ + */ + +#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ + ((IDTYPE) == CAN_Id_Extended)) +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request + * @{ + */ + +#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) + +/** + * @} + */ + +/** @defgroup CAN_transmit_constants + * @{ + */ + +#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ + +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants + * @{ + */ + +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ + +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) + +/** + * @} + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ + +/** + * @} + */ + +/** @defgroup CAN_wake_up_constants + * @{ + */ + +#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ + +/** + * @} + */ + +/** + * @defgroup CAN_Error_Code_constants + * @{ + */ + +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ + + +/** + * @} + */ + +/** @defgroup CAN_flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ +/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ + +#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ + ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ + ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ + ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_SLAK )) + +#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ + ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) +/** + * @} + */ + + +/** @defgroup CAN_interrupts + * @{ + */ + + + +#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + + +#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ + ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ + ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ + ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +/** + * @} + */ + +/** @defgroup CAN_Legacy + * @{ + */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +#define CANTXFAILE CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Functions + * @{ + */ +/* Function used to set the CAN configuration to the default reset state *****/ +void CAN_DeInit(CAN_TypeDef* CANx); + +/* Initialization and Configuration functions *********************************/ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); + +/* Transmit functions *********************************************************/ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); + +/* Receive functions **********************************************************/ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); + + +/* Operation modes functions **************************************************/ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef* CANx); +uint8_t CAN_WakeUp(CAN_TypeDef* CANx); + +/* Error management functions *************************************************/ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); + +/* Interrupts and flags management functions **********************************/ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CAN_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h new file mode 100644 index 00000000..a3f8fc78 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h @@ -0,0 +1,210 @@ +/** + ****************************************************************************** + * @file stm32f10x_cec.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CEC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CEC_H +#define __STM32F10x_CEC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + + +/** @defgroup CEC_Exported_Types + * @{ + */ + +/** + * @brief CEC Init structure definition + */ +typedef struct +{ + uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode. + This parameter can be a value of @ref CEC_BitTiming_Mode */ + uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode. + This parameter can be a value of @ref CEC_BitPeriod_Mode */ +}CEC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup CEC_Exported_Constants + * @{ + */ + +/** @defgroup CEC_BitTiming_Mode + * @{ + */ +#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */ +#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */ + +#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \ + ((MODE) == CEC_BitTimingErrFreeMode)) +/** + * @} + */ + +/** @defgroup CEC_BitPeriod_Mode + * @{ + */ +#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */ +#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */ + +#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \ + ((MODE) == CEC_BitPeriodFlexibleMode)) +/** + * @} + */ + + +/** @defgroup CEC_interrupts_definition + * @{ + */ +#define CEC_IT_TERR CEC_CSR_TERR +#define CEC_IT_TBTRF CEC_CSR_TBTRF +#define CEC_IT_RERR CEC_CSR_RERR +#define CEC_IT_RBTF CEC_CSR_RBTF +#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \ + ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF)) +/** + * @} + */ + + +/** @defgroup CEC_Own_Address + * @{ + */ +#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10) +/** + * @} + */ + +/** @defgroup CEC_Prescaler + * @{ + */ +#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF) + +/** + * @} + */ + +/** @defgroup CEC_flags_definition + * @{ + */ + +/** + * @brief ESR register flags + */ +#define CEC_FLAG_BTE ((uint32_t)0x10010000) +#define CEC_FLAG_BPE ((uint32_t)0x10020000) +#define CEC_FLAG_RBTFE ((uint32_t)0x10040000) +#define CEC_FLAG_SBE ((uint32_t)0x10080000) +#define CEC_FLAG_ACKE ((uint32_t)0x10100000) +#define CEC_FLAG_LINE ((uint32_t)0x10200000) +#define CEC_FLAG_TBTFE ((uint32_t)0x10400000) + +/** + * @brief CSR register flags + */ +#define CEC_FLAG_TEOM ((uint32_t)0x00000002) +#define CEC_FLAG_TERR ((uint32_t)0x00000004) +#define CEC_FLAG_TBTRF ((uint32_t)0x00000008) +#define CEC_FLAG_RSOM ((uint32_t)0x00000010) +#define CEC_FLAG_REOM ((uint32_t)0x00000020) +#define CEC_FLAG_RERR ((uint32_t)0x00000040) +#define CEC_FLAG_RBTF ((uint32_t)0x00000080) + +#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00)) + +#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \ + ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \ + ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \ + ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \ + ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \ + ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \ + ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions + * @{ + */ +void CEC_DeInit(void); +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct); +void CEC_Cmd(FunctionalState NewState); +void CEC_ITConfig(FunctionalState NewState); +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress); +void CEC_SetPrescaler(uint16_t CEC_Prescaler); +void CEC_SendDataByte(uint8_t Data); +uint8_t CEC_ReceiveDataByte(void); +void CEC_StartOfMessage(void); +void CEC_EndOfMessageCmd(FunctionalState NewState); +FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG); +void CEC_ClearFlag(uint32_t CEC_FLAG); +ITStatus CEC_GetITStatus(uint8_t CEC_IT); +void CEC_ClearITPendingBit(uint16_t CEC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CEC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h new file mode 100644 index 00000000..658a51ce --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h @@ -0,0 +1,94 @@ +/** + ****************************************************************************** + * @file stm32f10x_crc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CRC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CRC_H +#define __STM32F10x_CRC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/** @defgroup CRC_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions + * @{ + */ + +void CRC_ResetDR(void); +uint32_t CRC_CalcCRC(uint32_t Data); +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); +uint32_t CRC_GetCRC(void); +void CRC_SetIDRegister(uint8_t IDValue); +uint8_t CRC_GetIDRegister(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CRC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h new file mode 100644 index 00000000..71061641 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h @@ -0,0 +1,317 @@ +/** + ****************************************************************************** + * @file stm32f10x_dac.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DAC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DAC_H +#define __STM32F10x_DAC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +/** @defgroup DAC_Exported_Types + * @{ + */ + +/** + * @brief DAC Init structure definition + */ + +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves + are generated, or whether no wave is generated. + This parameter can be a value of @ref DAC_wave_generation */ + + uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or + the maximum amplitude triangle generation for the DAC channel. + This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ +}DAC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup DAC_Exported_Constants + * @{ + */ + +/** @defgroup DAC_trigger_selection + * @{ + */ + +#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel + only in High-density devices*/ +#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel + only in Connectivity line, Medium-density and Low-density Value Line devices */ +#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel + only in Medium-density and Low-density Value Line devices*/ +#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */ + +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ + ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ + ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ + ((TRIGGER) == DAC_Trigger_Software)) + +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_WaveGeneration_None ((uint32_t)0x00000000) +#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) +#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) +#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ + ((WAVE) == DAC_WaveGeneration_Noise) || \ + ((WAVE) == DAC_WaveGeneration_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_lfsrunmask_triangleamplitude + * @{ + */ + +#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ +#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ +#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ +#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ +#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ +#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ +#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ +#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ +#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ +#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ + ((VALUE) == DAC_TriangleAmplitude_1) || \ + ((VALUE) == DAC_TriangleAmplitude_3) || \ + ((VALUE) == DAC_TriangleAmplitude_7) || \ + ((VALUE) == DAC_TriangleAmplitude_15) || \ + ((VALUE) == DAC_TriangleAmplitude_31) || \ + ((VALUE) == DAC_TriangleAmplitude_63) || \ + ((VALUE) == DAC_TriangleAmplitude_127) || \ + ((VALUE) == DAC_TriangleAmplitude_255) || \ + ((VALUE) == DAC_TriangleAmplitude_511) || \ + ((VALUE) == DAC_TriangleAmplitude_1023) || \ + ((VALUE) == DAC_TriangleAmplitude_2047) || \ + ((VALUE) == DAC_TriangleAmplitude_4095)) +/** + * @} + */ + +/** @defgroup DAC_output_buffer + * @{ + */ + +#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) +#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002) +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ + ((STATE) == DAC_OutputBuffer_Disable)) +/** + * @} + */ + +/** @defgroup DAC_Channel_selection + * @{ + */ + +#define DAC_Channel_1 ((uint32_t)0x00000000) +#define DAC_Channel_2 ((uint32_t)0x00000010) +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ + ((CHANNEL) == DAC_Channel_2)) +/** + * @} + */ + +/** @defgroup DAC_data_alignment + * @{ + */ + +#define DAC_Align_12b_R ((uint32_t)0x00000000) +#define DAC_Align_12b_L ((uint32_t)0x00000004) +#define DAC_Align_8b_R ((uint32_t)0x00000008) +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ + ((ALIGN) == DAC_Align_12b_L) || \ + ((ALIGN) == DAC_Align_8b_R)) +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_Wave_Noise ((uint32_t)0x00000040) +#define DAC_Wave_Triangle ((uint32_t)0x00000080) +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ + ((WAVE) == DAC_Wave_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_data + * @{ + */ + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) +/** + * @} + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** @defgroup DAC_interrupts_definition + * @{ + */ + +#define DAC_IT_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) + +/** + * @} + */ + +/** @defgroup DAC_flags_definition + * @{ + */ + +#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR)) + +/** + * @} + */ +#endif + +/** + * @} + */ + +/** @defgroup DAC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions + * @{ + */ + +void DAC_DeInit(void); +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState); +#endif +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG); +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG); +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT); +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_DAC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h new file mode 100644 index 00000000..1e6a68ac --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file stm32f10x_dbgmcu.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DBGMCU + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DBGMCU_H +#define __STM32F10x_DBGMCU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DBGMCU + * @{ + */ + +/** @defgroup DBGMCU_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Constants + * @{ + */ + +#define DBGMCU_SLEEP ((uint32_t)0x00000001) +#define DBGMCU_STOP ((uint32_t)0x00000002) +#define DBGMCU_STANDBY ((uint32_t)0x00000004) +#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100) +#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200) +#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400) +#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800) +#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000) +#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000) +#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000) +#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) +#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) +#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000) +#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000) +#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000) +#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000) +#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000) +#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000) +#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000) +#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000) +#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000) +#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000) +#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000) +#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000) +#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000) +#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000) + +#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Functions + * @{ + */ + +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_DBGMCU_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h new file mode 100644 index 00000000..b5dc6a80 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h @@ -0,0 +1,439 @@ +/** + ****************************************************************************** + * @file stm32f10x_dma.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DMA firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DMA_H +#define __STM32F10x_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/** @defgroup DMA_Exported_Types + * @{ + */ + +/** + * @brief DMA Init structure definition + */ + +typedef struct +{ + uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ + + uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ + + uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction. */ + + uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_circular_normal_mode. + @note: The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. + This parameter can be a value of @ref DMA_memory_to_memory */ +}DMA_InitTypeDef; + +/** + * @} + */ + +/** @defgroup DMA_Exported_Constants + * @{ + */ + +#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ + ((PERIPH) == DMA1_Channel2) || \ + ((PERIPH) == DMA1_Channel3) || \ + ((PERIPH) == DMA1_Channel4) || \ + ((PERIPH) == DMA1_Channel5) || \ + ((PERIPH) == DMA1_Channel6) || \ + ((PERIPH) == DMA1_Channel7) || \ + ((PERIPH) == DMA2_Channel1) || \ + ((PERIPH) == DMA2_Channel2) || \ + ((PERIPH) == DMA2_Channel3) || \ + ((PERIPH) == DMA2_Channel4) || \ + ((PERIPH) == DMA2_Channel5)) + +/** @defgroup DMA_data_transfer_direction + * @{ + */ + +#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) +#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) +#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ + ((DIR) == DMA_DIR_PeripheralSRC)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_incremented_mode + * @{ + */ + +#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ + ((STATE) == DMA_PeripheralInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_memory_incremented_mode + * @{ + */ + +#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ + ((STATE) == DMA_MemoryInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_data_size + * @{ + */ + +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) +#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ + ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ + ((SIZE) == DMA_PeripheralDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_memory_data_size + * @{ + */ + +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) +#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ + ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ + ((SIZE) == DMA_MemoryDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_circular_normal_mode + * @{ + */ + +#define DMA_Mode_Circular ((uint32_t)0x00000020) +#define DMA_Mode_Normal ((uint32_t)0x00000000) +#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) +/** + * @} + */ + +/** @defgroup DMA_priority_level + * @{ + */ + +#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) +#define DMA_Priority_High ((uint32_t)0x00002000) +#define DMA_Priority_Medium ((uint32_t)0x00001000) +#define DMA_Priority_Low ((uint32_t)0x00000000) +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ + ((PRIORITY) == DMA_Priority_High) || \ + ((PRIORITY) == DMA_Priority_Medium) || \ + ((PRIORITY) == DMA_Priority_Low)) +/** + * @} + */ + +/** @defgroup DMA_memory_to_memory + * @{ + */ + +#define DMA_M2M_Enable ((uint32_t)0x00004000) +#define DMA_M2M_Disable ((uint32_t)0x00000000) +#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) + +/** + * @} + */ + +/** @defgroup DMA_interrupts_definition + * @{ + */ + +#define DMA_IT_TC ((uint32_t)0x00000002) +#define DMA_IT_HT ((uint32_t)0x00000004) +#define DMA_IT_TE ((uint32_t)0x00000008) +#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) + +#define DMA1_IT_GL1 ((uint32_t)0x00000001) +#define DMA1_IT_TC1 ((uint32_t)0x00000002) +#define DMA1_IT_HT1 ((uint32_t)0x00000004) +#define DMA1_IT_TE1 ((uint32_t)0x00000008) +#define DMA1_IT_GL2 ((uint32_t)0x00000010) +#define DMA1_IT_TC2 ((uint32_t)0x00000020) +#define DMA1_IT_HT2 ((uint32_t)0x00000040) +#define DMA1_IT_TE2 ((uint32_t)0x00000080) +#define DMA1_IT_GL3 ((uint32_t)0x00000100) +#define DMA1_IT_TC3 ((uint32_t)0x00000200) +#define DMA1_IT_HT3 ((uint32_t)0x00000400) +#define DMA1_IT_TE3 ((uint32_t)0x00000800) +#define DMA1_IT_GL4 ((uint32_t)0x00001000) +#define DMA1_IT_TC4 ((uint32_t)0x00002000) +#define DMA1_IT_HT4 ((uint32_t)0x00004000) +#define DMA1_IT_TE4 ((uint32_t)0x00008000) +#define DMA1_IT_GL5 ((uint32_t)0x00010000) +#define DMA1_IT_TC5 ((uint32_t)0x00020000) +#define DMA1_IT_HT5 ((uint32_t)0x00040000) +#define DMA1_IT_TE5 ((uint32_t)0x00080000) +#define DMA1_IT_GL6 ((uint32_t)0x00100000) +#define DMA1_IT_TC6 ((uint32_t)0x00200000) +#define DMA1_IT_HT6 ((uint32_t)0x00400000) +#define DMA1_IT_TE6 ((uint32_t)0x00800000) +#define DMA1_IT_GL7 ((uint32_t)0x01000000) +#define DMA1_IT_TC7 ((uint32_t)0x02000000) +#define DMA1_IT_HT7 ((uint32_t)0x04000000) +#define DMA1_IT_TE7 ((uint32_t)0x08000000) + +#define DMA2_IT_GL1 ((uint32_t)0x10000001) +#define DMA2_IT_TC1 ((uint32_t)0x10000002) +#define DMA2_IT_HT1 ((uint32_t)0x10000004) +#define DMA2_IT_TE1 ((uint32_t)0x10000008) +#define DMA2_IT_GL2 ((uint32_t)0x10000010) +#define DMA2_IT_TC2 ((uint32_t)0x10000020) +#define DMA2_IT_HT2 ((uint32_t)0x10000040) +#define DMA2_IT_TE2 ((uint32_t)0x10000080) +#define DMA2_IT_GL3 ((uint32_t)0x10000100) +#define DMA2_IT_TC3 ((uint32_t)0x10000200) +#define DMA2_IT_HT3 ((uint32_t)0x10000400) +#define DMA2_IT_TE3 ((uint32_t)0x10000800) +#define DMA2_IT_GL4 ((uint32_t)0x10001000) +#define DMA2_IT_TC4 ((uint32_t)0x10002000) +#define DMA2_IT_HT4 ((uint32_t)0x10004000) +#define DMA2_IT_TE4 ((uint32_t)0x10008000) +#define DMA2_IT_GL5 ((uint32_t)0x10010000) +#define DMA2_IT_TC5 ((uint32_t)0x10020000) +#define DMA2_IT_HT5 ((uint32_t)0x10040000) +#define DMA2_IT_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) + +#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ + ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ + ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ + ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ + ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ + ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ + ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ + ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ + ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ + ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ + ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ + ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ + ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ + ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ + ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ + ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ + ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ + ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ + ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ + ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ + ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ + ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ + ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ + ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) + +/** + * @} + */ + +/** @defgroup DMA_flags_definition + * @{ + */ +#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) +#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) +#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) +#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) +#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) +#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) +#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) +#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) +#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) +#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) +#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) +#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) +#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) +#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) +#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) +#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) +#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) +#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) +#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) +#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) +#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) +#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) +#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) +#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) +#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) +#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) +#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) +#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) + +#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) +#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) +#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) +#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) +#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) +#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) +#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) +#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) +#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) +#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) +#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) +#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) +#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) +#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) +#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) +#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) +#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) +#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) +#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) +#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) + +#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ + ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ + ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ + ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ + ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ + ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ + ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ + ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ + ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ + ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ + ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ + ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ + ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ + ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ + ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ + ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ + ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ + ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ + ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ + ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ + ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ + ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ + ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ + ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) +/** + * @} + */ + +/** @defgroup DMA_Buffer_Size + * @{ + */ + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DMA_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions + * @{ + */ + +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); +void DMA_ClearFlag(uint32_t DMAy_FLAG); +ITStatus DMA_GetITStatus(uint32_t DMAy_IT); +void DMA_ClearITPendingBit(uint32_t DMAy_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_DMA_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h new file mode 100644 index 00000000..a1ab7d03 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h @@ -0,0 +1,184 @@ +/** + ****************************************************************************** + * @file stm32f10x_exti.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the EXTI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_EXTI_H +#define __STM32F10x_EXTI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +/** @defgroup EXTI_Exported_Types + * @{ + */ + +/** + * @brief EXTI mode enumeration + */ + +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +}EXTIMode_TypeDef; + +#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) + +/** + * @brief EXTI Trigger enumeration + */ + +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +}EXTITrigger_TypeDef; + +#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ + ((TRIGGER) == EXTI_Trigger_Falling) || \ + ((TRIGGER) == EXTI_Trigger_Rising_Falling)) +/** + * @brief EXTI Init Structure definition + */ + +typedef struct +{ + uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +}EXTI_InitTypeDef; + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Constants + * @{ + */ + +/** @defgroup EXTI_Lines + * @{ + */ + +#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS + Wakeup from suspend event */ +#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ + +#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00)) +#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ + ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ + ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ + ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ + ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ + ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ + ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ + ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ + ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ + ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19)) + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions + * @{ + */ + +void EXTI_DeInit(void); +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_EXTI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h new file mode 100644 index 00000000..f46d4e87 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h @@ -0,0 +1,426 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FLASH_H +#define __STM32F10x_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @defgroup FLASH_Exported_Types + * @{ + */ + +/** + * @brief FLASH Status + */ + +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_PG, + FLASH_ERROR_WRP, + FLASH_COMPLETE, + FLASH_TIMEOUT +}FLASH_Status; + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup Flash_Latency + * @{ + */ + +#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */ +#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */ +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1) || \ + ((LATENCY) == FLASH_Latency_2)) +/** + * @} + */ + +/** @defgroup Half_Cycle_Enable_Disable + * @{ + */ + +#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */ +#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */ +#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ + ((STATE) == FLASH_HalfCycleAccess_Disable)) +/** + * @} + */ + +/** @defgroup Prefetch_Buffer_Enable_Disable + * @{ + */ + +#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */ +#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */ +#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ + ((STATE) == FLASH_PrefetchBuffer_Disable)) +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ + +/* Values to be used with STM32 Low and Medium density devices */ +#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */ +#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */ +#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */ +#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */ +#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */ +#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */ +#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */ +#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */ + +/* Values to be used with STM32 Medium-density devices */ +#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */ +#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */ +#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */ +#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */ +#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */ +#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */ +#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */ +#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */ +#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */ +#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */ +#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */ +#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */ +#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */ +#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */ +#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */ +#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */ +#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */ +#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */ +#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */ +#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */ +#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */ +#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */ +#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */ +#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */ + +/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */ +#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 0 to 1 */ +#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 2 to 3 */ +#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 4 to 5 */ +#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 6 to 7 */ +#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 8 to 9 */ +#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 10 to 11 */ +#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 12 to 13 */ +#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 14 to 15 */ +#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 16 to 17 */ +#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 18 to 19 */ +#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 20 to 21 */ +#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 22 to 23 */ +#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 24 to 25 */ +#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 26 to 27 */ +#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 28 to 29 */ +#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 30 to 31 */ +#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 32 to 33 */ +#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 34 to 35 */ +#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 36 to 37 */ +#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 38 to 39 */ +#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 40 to 41 */ +#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 42 to 43 */ +#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 44 to 45 */ +#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 46 to 47 */ +#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 48 to 49 */ +#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 50 to 51 */ +#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 52 to 53 */ +#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 54 to 55 */ +#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 56 to 57 */ +#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 58 to 59 */ +#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 60 to 61 */ +#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */ +#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */ +#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */ + +#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */ + +#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) + +#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STOP + * @{ + */ + +#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STDBY + * @{ + */ + +#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) + +#ifdef STM32F10X_XL +/** + * @} + */ +/** @defgroup FLASH_Boot + * @{ + */ +#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank1(Default) */ +#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank 2 or Bank 1, + depending on the activation of the bank */ +#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2)) +#endif +/** + * @} + */ +/** @defgroup FLASH_Interrupts + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */ +#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */ + +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#else +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#endif + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */ +#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */ +#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */ +#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)|| \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR)) +#else +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions + * @{ + */ + +/*------------ Functions used for all STM32F10x devices -----*/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess); +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer); +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_EraseAllPages(void); +FLASH_Status FLASH_EraseOptionBytes(void); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data); +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages); +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY); +uint32_t FLASH_GetUserOptionByte(void); +uint32_t FLASH_GetWriteProtectionOptionByte(void); +FlagStatus FLASH_GetReadOutProtectionStatus(void); +FlagStatus FLASH_GetPrefetchBufferStatus(void); +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); + +/*------------ New function used for all STM32F10x devices -----*/ +void FLASH_UnlockBank1(void); +void FLASH_LockBank1(void); +FLASH_Status FLASH_EraseAllBank1Pages(void); +FLASH_Status FLASH_GetBank1Status(void); +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout); + +#ifdef STM32F10X_XL +/*---- New Functions used only with STM32F10x_XL density devices -----*/ +void FLASH_UnlockBank2(void); +void FLASH_LockBank2(void); +FLASH_Status FLASH_EraseAllBank2Pages(void); +FLASH_Status FLASH_GetBank2Status(void); +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout); +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_FLASH_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h new file mode 100644 index 00000000..ee707e74 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h @@ -0,0 +1,733 @@ +/** + ****************************************************************************** + * @file stm32f10x_fsmc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the FSMC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FSMC_H +#define __STM32F10x_FSMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FSMC + * @{ + */ + +/** @defgroup FSMC_Exported_Types + * @{ + */ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ + +typedef struct +{ + uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 0xF. + @note: It is not used with synchronous NOR Flash memories. */ + + uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 0 and 0xF. + @note: It is not used with synchronous NOR Flash memories.*/ + + uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 0 and 0xFF. + @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 0xF. + @note: It is only used for multiplexed NOR Flash memories. */ + + uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 0xF. + @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The value of this parameter depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 0xF in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ +}FSMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FSMC NOR/SRAM Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_Data_Width */ + + uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode */ + + uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ +}FSMC_NORSRAMInitTypeDef; + +/** + * @brief Timing parameters For FSMC NAND and PCCARD Banks + */ + +typedef struct +{ + uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between 0 and 0xFF.*/ + + uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command deassertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + databus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ +}FSMC_NAND_PCCARDTimingInitTypeDef; + +/** + * @brief FSMC NAND Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used. + This parameter can be a value of @ref FSMC_NAND_Bank */ + + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FSMC_Data_Width */ + + uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FSMC_ECC */ + + uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FSMC_ECC_Page_Size */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ +}FSMC_NANDInitTypeDef; + +/** + * @brief FSMC PCCARD Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */ +}FSMC_PCCARDInitTypeDef; + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank + * @{ + */ +#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup FSMC_NAND_Bank + * @{ + */ +#define FSMC_Bank2_NAND ((uint32_t)0x00000010) +#define FSMC_Bank3_NAND ((uint32_t)0x00000100) +/** + * @} + */ + +/** @defgroup FSMC_PCCARD_Bank + * @{ + */ +#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000) +/** + * @} + */ + +#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ + ((BANK) == FSMC_Bank1_NORSRAM2) || \ + ((BANK) == FSMC_Bank1_NORSRAM3) || \ + ((BANK) == FSMC_Bank1_NORSRAM4)) + +#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND)) + +#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +/** @defgroup NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) +#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ + ((MUX) == FSMC_DataAddressMux_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type + * @{ + */ + +#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) +#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ + ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FSMC_MemoryType_NOR)) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Width + * @{ + */ + +#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ + ((WIDTH) == FSMC_MemoryDataWidth_16b)) + +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode + * @{ + */ + +#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) +#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ + ((STATE) == FSMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait + * @{ + */ +#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000) +#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \ + ((STATE) == FSMC_AsynchronousWait_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity + * @{ + */ + +#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) +#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FSMC_WaitSignalPolarity_High)) + +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode + * @{ + */ + +#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) +#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ + ((MODE) == FSMC_WrapMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing + * @{ + */ + +#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation + * @{ + */ + +#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) +#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ + ((OPERATION) == FSMC_WriteOperation_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal + * @{ + */ + +#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) +#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ + ((SIGNAL) == FSMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode + * @{ + */ + +#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ + ((MODE) == FSMC_ExtendedMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst + * @{ + */ + +#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) +#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ + ((BURST) == FSMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Address_Setup_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Address_Hold_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Setup_Time + * @{ + */ + +#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) + +/** + * @} + */ + +/** @defgroup FSMC_Bus_Turn_around_Duration + * @{ + */ + +#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_CLK_Division + * @{ + */ + +#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Latency + * @{ + */ + +#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode + * @{ + */ + +#define FSMC_AccessMode_A ((uint32_t)0x00000000) +#define FSMC_AccessMode_B ((uint32_t)0x10000000) +#define FSMC_AccessMode_C ((uint32_t)0x20000000) +#define FSMC_AccessMode_D ((uint32_t)0x30000000) +#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ + ((MODE) == FSMC_AccessMode_B) || \ + ((MODE) == FSMC_AccessMode_C) || \ + ((MODE) == FSMC_AccessMode_D)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup NAND_PCCARD_Controller + * @{ + */ + +/** @defgroup FSMC_Wait_feature + * @{ + */ + +#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000) +#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002) +#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ + ((FEATURE) == FSMC_Waitfeature_Enable)) + +/** + * @} + */ + + +/** @defgroup FSMC_ECC + * @{ + */ + +#define FSMC_ECC_Disable ((uint32_t)0x00000000) +#define FSMC_ECC_Enable ((uint32_t)0x00000040) +#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ + ((STATE) == FSMC_ECC_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_ECC_Page_Size + * @{ + */ + +#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) +#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) +#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) +#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) +#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) +#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) +#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_8192Bytes)) + +/** + * @} + */ + +/** @defgroup FSMC_TCLR_Setup_Time + * @{ + */ + +#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_TAR_Setup_Time + * @{ + */ + +#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Setup_Time + * @{ + */ + +#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Setup_Time + * @{ + */ + +#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Hold_Setup_Time + * @{ + */ + +#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_HiZ_Setup_Time + * @{ + */ + +#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Interrupt_sources + * @{ + */ + +#define FSMC_IT_RisingEdge ((uint32_t)0x00000008) +#define FSMC_IT_Level ((uint32_t)0x00000010) +#define FSMC_IT_FallingEdge ((uint32_t)0x00000020) +#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) +#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ + ((IT) == FSMC_IT_Level) || \ + ((IT) == FSMC_IT_FallingEdge)) +/** + * @} + */ + +/** @defgroup FSMC_Flags + * @{ + */ + +#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001) +#define FSMC_FLAG_Level ((uint32_t)0x00000002) +#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004) +#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) +#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ + ((FLAG) == FSMC_FLAG_Level) || \ + ((FLAG) == FSMC_FLAG_FallingEdge) || \ + ((FLAG) == FSMC_FLAG_FEMPT)) + +#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Functions + * @{ + */ + +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); +void FSMC_NANDDeInit(uint32_t FSMC_Bank); +void FSMC_PCCARDDeInit(void); +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_PCCARDCmd(FunctionalState NewState); +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState); +uint32_t FSMC_GetECC(uint32_t FSMC_Bank); +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState); +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT); +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_FSMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h new file mode 100644 index 00000000..b8aa49a2 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h @@ -0,0 +1,385 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the GPIO + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_GPIO_H +#define __STM32F10x_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/** @defgroup GPIO_Exported_Types + * @{ + */ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOF) || \ + ((PERIPH) == GPIOG)) + +/** + * @brief Output Maximum frequency selection + */ + +typedef enum +{ + GPIO_Speed_10MHz = 1, + GPIO_Speed_2MHz, + GPIO_Speed_50MHz +}GPIOSpeed_TypeDef; +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ + ((SPEED) == GPIO_Speed_50MHz)) + +/** + * @brief Configuration Mode enumeration + */ + +typedef enum +{ GPIO_Mode_AIN = 0x0, + GPIO_Mode_IN_FLOATING = 0x04, + GPIO_Mode_IPD = 0x28, + GPIO_Mode_IPU = 0x48, + GPIO_Mode_Out_OD = 0x14, + GPIO_Mode_Out_PP = 0x10, + GPIO_Mode_AF_OD = 0x1C, + GPIO_Mode_AF_PP = 0x18 +}GPIOMode_TypeDef; + +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ + ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ + ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ + ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) + +/** + * @brief GPIO Init structure definition + */ + +typedef struct +{ + uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ +}GPIO_InitTypeDef; + + +/** + * @brief Bit_SET and Bit_RESET enumeration + */ + +typedef enum +{ Bit_RESET = 0, + Bit_SET +}BitAction; + +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ + +#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) + +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) + +/** + * @} + */ + +/** @defgroup GPIO_Remap_define + * @{ + */ + +#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */ +#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */ +#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */ +#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */ +#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */ +#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */ +#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */ +#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */ +#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */ +#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */ +#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */ +#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */ +#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */ +#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ +#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */ +#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */ +#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected + to TIM2 Internal Trigger 1 for calibration + (only for Connectivity line devices) */ +#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ + +#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */ + +#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */ + +#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */ +#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */ +#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + only for High density Value line devices) */ + +#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ + ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ + ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ + ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ + ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ + ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ + ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ + ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \ + ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ + ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \ + ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \ + ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \ + ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \ + ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \ + ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \ + ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \ + ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \ + ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \ + ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \ + ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC)) + +/** + * @} + */ + +/** @defgroup GPIO_Port_Sources + * @{ + */ + +#define GPIO_PortSourceGPIOA ((uint8_t)0x00) +#define GPIO_PortSourceGPIOB ((uint8_t)0x01) +#define GPIO_PortSourceGPIOC ((uint8_t)0x02) +#define GPIO_PortSourceGPIOD ((uint8_t)0x03) +#define GPIO_PortSourceGPIOE ((uint8_t)0x04) +#define GPIO_PortSourceGPIOF ((uint8_t)0x05) +#define GPIO_PortSourceGPIOG ((uint8_t)0x06) +#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE)) + +#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOG)) + +/** + * @} + */ + +/** @defgroup GPIO_Pin_sources + * @{ + */ + +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) + +/** + * @} + */ + +/** @defgroup Ethernet_Media_Interface + * @{ + */ +#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) +#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) + +#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \ + ((INTERFACE) == GPIO_ETH_MediaInterface_RMII)) + +/** + * @} + */ +/** + * @} + */ + +/** @defgroup GPIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions + * @{ + */ + +void GPIO_DeInit(GPIO_TypeDef* GPIOx); +void GPIO_AFIODeInit(void); +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_EventOutputCmd(FunctionalState NewState); +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_GPIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h new file mode 100644 index 00000000..2d42e5ce --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h @@ -0,0 +1,684 @@ +/** + ****************************************************************************** + * @file stm32f10x_i2c.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the I2C firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_I2C_H +#define __STM32F10x_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/** @defgroup I2C_Exported_Types + * @{ + */ + +/** + * @brief I2C Init structure definition + */ + +typedef struct +{ + uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint16_t I2C_Mode; /*!< Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode */ + + uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement */ + + uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address */ +}I2C_InitTypeDef; + +/** + * @} + */ + + +/** @defgroup I2C_Exported_Constants + * @{ + */ + +#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ + ((PERIPH) == I2C2)) +/** @defgroup I2C_mode + * @{ + */ + +#define I2C_Mode_I2C ((uint16_t)0x0000) +#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) +#define I2C_Mode_SMBusHost ((uint16_t)0x000A) +#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ + ((MODE) == I2C_Mode_SMBusDevice) || \ + ((MODE) == I2C_Mode_SMBusHost)) +/** + * @} + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode + * @{ + */ + +#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ +#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ + ((CYCLE) == I2C_DutyCycle_2)) +/** + * @} + */ + +/** @defgroup I2C_acknowledgement + * @{ + */ + +#define I2C_Ack_Enable ((uint16_t)0x0400) +#define I2C_Ack_Disable ((uint16_t)0x0000) +#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ + ((STATE) == I2C_Ack_Disable)) +/** + * @} + */ + +/** @defgroup I2C_transfer_direction + * @{ + */ + +#define I2C_Direction_Transmitter ((uint8_t)0x00) +#define I2C_Direction_Receiver ((uint8_t)0x01) +#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ + ((DIRECTION) == I2C_Direction_Receiver)) +/** + * @} + */ + +/** @defgroup I2C_acknowledged_address + * @{ + */ + +#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) +#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) +#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ + ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) +/** + * @} + */ + +/** @defgroup I2C_registers + * @{ + */ + +#define I2C_Register_CR1 ((uint8_t)0x00) +#define I2C_Register_CR2 ((uint8_t)0x04) +#define I2C_Register_OAR1 ((uint8_t)0x08) +#define I2C_Register_OAR2 ((uint8_t)0x0C) +#define I2C_Register_DR ((uint8_t)0x10) +#define I2C_Register_SR1 ((uint8_t)0x14) +#define I2C_Register_SR2 ((uint8_t)0x18) +#define I2C_Register_CCR ((uint8_t)0x1C) +#define I2C_Register_TRISE ((uint8_t)0x20) +#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ + ((REGISTER) == I2C_Register_CR2) || \ + ((REGISTER) == I2C_Register_OAR1) || \ + ((REGISTER) == I2C_Register_OAR2) || \ + ((REGISTER) == I2C_Register_DR) || \ + ((REGISTER) == I2C_Register_SR1) || \ + ((REGISTER) == I2C_Register_SR2) || \ + ((REGISTER) == I2C_Register_CCR) || \ + ((REGISTER) == I2C_Register_TRISE)) +/** + * @} + */ + +/** @defgroup I2C_SMBus_alert_pin_level + * @{ + */ + +#define I2C_SMBusAlert_Low ((uint16_t)0x2000) +#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) +#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ + ((ALERT) == I2C_SMBusAlert_High)) +/** + * @} + */ + +/** @defgroup I2C_PEC_position + * @{ + */ + +#define I2C_PECPosition_Next ((uint16_t)0x0800) +#define I2C_PECPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ + ((POSITION) == I2C_PECPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_NCAK_position + * @{ + */ + +#define I2C_NACKPosition_Next ((uint16_t)0x0800) +#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \ + ((POSITION) == I2C_NACKPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_BUF ((uint16_t)0x0400) +#define I2C_IT_EVT ((uint16_t)0x0200) +#define I2C_IT_ERR ((uint16_t)0x0100) +#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_SMBALERT ((uint32_t)0x01008000) +#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) +#define I2C_IT_PECERR ((uint32_t)0x01001000) +#define I2C_IT_OVR ((uint32_t)0x01000800) +#define I2C_IT_AF ((uint32_t)0x01000400) +#define I2C_IT_ARLO ((uint32_t)0x01000200) +#define I2C_IT_BERR ((uint32_t)0x01000100) +#define I2C_IT_TXE ((uint32_t)0x06000080) +#define I2C_IT_RXNE ((uint32_t)0x06000040) +#define I2C_IT_STOPF ((uint32_t)0x02000010) +#define I2C_IT_ADD10 ((uint32_t)0x02000008) +#define I2C_IT_BTF ((uint32_t)0x02000004) +#define I2C_IT_ADDR ((uint32_t)0x02000002) +#define I2C_IT_SB ((uint32_t)0x02000001) + +#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) + +#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ + ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ + ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ + ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ + ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ + ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ + ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @{ + */ + +/** + * @brief SR2 register flags + */ + +#define I2C_FLAG_DUALF ((uint32_t)0x00800000) +#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) +#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) +#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) +#define I2C_FLAG_TRA ((uint32_t)0x00040000) +#define I2C_FLAG_BUSY ((uint32_t)0x00020000) +#define I2C_FLAG_MSL ((uint32_t)0x00010000) + +/** + * @brief SR1 register flags + */ + +#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) +#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) +#define I2C_FLAG_PECERR ((uint32_t)0x10001000) +#define I2C_FLAG_OVR ((uint32_t)0x10000800) +#define I2C_FLAG_AF ((uint32_t)0x10000400) +#define I2C_FLAG_ARLO ((uint32_t)0x10000200) +#define I2C_FLAG_BERR ((uint32_t)0x10000100) +#define I2C_FLAG_TXE ((uint32_t)0x10000080) +#define I2C_FLAG_RXNE ((uint32_t)0x10000040) +#define I2C_FLAG_STOPF ((uint32_t)0x10000010) +#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) +#define I2C_FLAG_BTF ((uint32_t)0x10000004) +#define I2C_FLAG_ADDR ((uint32_t)0x10000002) +#define I2C_FLAG_SB ((uint32_t)0x10000001) + +#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ + ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ + ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ + ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ + ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ + ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ + ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ + ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ + ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ + ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ + ((FLAG) == I2C_FLAG_SB)) +/** + * @} + */ + +/** @defgroup I2C_Events + * @{ + */ + +/*======================================== + + I2C Master Events (Events grouped in order of communication) + ==========================================*/ +/** + * @brief Communication start + * + * After sending the START condition (I2C_GenerateSTART() function) the master + * has to wait for this event. It means that the Start condition has been correctly + * released on the I2C bus (the bus is free, no other devices is communicating). + * + */ +/* --EV5 */ +#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ + +/** + * @brief Address Acknowledge + * + * After checking on EV5 (start condition correctly released on the bus), the + * master sends the address of the slave(s) with which it will communicate + * (I2C_Send7bitAddress() function, it also determines the direction of the communication: + * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges + * his address. If an acknowledge is sent on the bus, one of the following events will + * be set: + * + * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED + * event is set. + * + * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED + * is set + * + * 3) In case of 10-Bit addressing mode, the master (just after generating the START + * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() + * function). Then master should wait on EV9. It means that the 10-bit addressing + * header has been correctly sent on the bus. Then master should send the second part of + * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master + * should wait for event EV6. + * + */ + +/* --EV6 */ +#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ +/* --EV9 */ +#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ + +/** + * @brief Communication events + * + * If a communication is established (START condition generated and slave address + * acknowledged) then the master has to check on one of the following events for + * communication procedures: + * + * 1) Master Receiver mode: The master has to wait on the event EV7 then to read + * the data received from the slave (I2C_ReceiveData() function). + * + * 2) Master Transmitter mode: The master has to send data (I2C_SendData() + * function) then to wait on event EV8 or EV8_2. + * These two events are similar: + * - EV8 means that the data has been written in the data register and is + * being shifted out. + * - EV8_2 means that the data has been physically shifted out and output + * on the bus. + * In most cases, using EV8 is sufficient for the application. + * Using EV8_2 leads to a slower communication but ensure more reliable test. + * EV8_2 is also more suitable than EV8 for testing on the last data transmission + * (before Stop condition generation). + * + * @note In case the user software does not guarantee that this event EV7 is + * managed before the current byte end of transfer, then user may check on EV7 + * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Master RECEIVER mode -----------------------------*/ +/* --EV7 */ +#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ + +/* Master TRANSMITTER mode --------------------------*/ +/* --EV8 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ +/* --EV8_2 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ + + +/*======================================== + + I2C Slave Events (Events grouped in order of communication) + ==========================================*/ + +/** + * @brief Communication start events + * + * Wait on one of these events at the start of the communication. It means that + * the I2C peripheral detected a Start condition on the bus (generated by master + * device) followed by the peripheral address. The peripheral generates an ACK + * condition on the bus (if the acknowledge feature is enabled through function + * I2C_AcknowledgeConfig()) and the events listed above are set : + * + * 1) In normal case (only one address managed by the slave), when the address + * sent by the master matches the own address of the peripheral (configured by + * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set + * (where XXX could be TRANSMITTER or RECEIVER). + * + * 2) In case the address sent by the master matches the second address of the + * peripheral (configured by the function I2C_OwnAddress2Config() and enabled + * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED + * (where XXX could be TRANSMITTER or RECEIVER) are set. + * + * 3) In case the address sent by the master is General Call (address 0x00) and + * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) + * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. + * + */ + +/* --EV1 (all the events below are variants of EV1) */ +/* 1) Case of One Single Address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ + +/* 2) Case of Dual address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ + +/* 3) Case of General Call enabled for the slave */ +#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ + +/** + * @brief Communication events + * + * Wait on one of these events when EV1 has already been checked and: + * + * - Slave RECEIVER mode: + * - EV2: When the application is expecting a data byte to be received. + * - EV4: When the application is expecting the end of the communication: master + * sends a stop condition and data transmission is stopped. + * + * - Slave Transmitter mode: + * - EV3: When a byte has been transmitted by the slave and the application is expecting + * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and + * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be + * used when the user software doesn't guarantee the EV3 is managed before the + * current byte end of transfer. + * - EV3_2: When the master sends a NACK in order to tell slave that data transmission + * shall end (before sending the STOP condition). In this case slave has to stop sending + * data bytes and expect a Stop condition on the bus. + * + * @note In case the user software does not guarantee that the event EV2 is + * managed before the current byte end of transfer, then user may check on EV2 + * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Slave RECEIVER mode --------------------------*/ +/* --EV2 */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +/* --EV4 */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ + +/* Slave TRANSMITTER mode -----------------------*/ +/* --EV3 */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +/* --EV3_2 */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + +/*=========================== End of Events Description ==========================================*/ + +#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ + ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ + ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) +/** + * @} + */ + +/** @defgroup I2C_own_address1 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) +/** + * @} + */ + +/** @defgroup I2C_clock_speed + * @{ + */ + +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions + * @{ + */ + +void I2C_DeInit(I2C_TypeDef* I2Cx); +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition); +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); + +/** + * @brief + **************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * depending on the application requirements and constraints: + * + * + * 1) Basic state monitoring: + * Using I2C_CheckEvent() function: + * It compares the status registers (SR1 and SR2) content to a given event + * (can be the combination of one or more flags). + * It returns SUCCESS if the current status includes the given flags + * and returns ERROR if one or more flags are missing in the current status. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (RM0008). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs (ie. error flags are set besides to the monitored flags), + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * hold or corrupted real state. + * In this case, it is advised to use error interrupts to monitor the error + * events and handle them in the interrupt IRQ handler. + * + * @note + * For error management, it is advised to use the following functions: + * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() + * in order to determine which error occurred. + * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + * and/or I2C_GenerateStop() in order to clear the error flag and source, + * and return to correct communication status. + * + * + * 2) Advanced state monitoring: + * Using the function I2C_GetLastEvent() which returns the image of both status + * registers in a single word (uint32_t) (Status Register 2 value is shifted left + * by 16 bits and concatenated to Status Register 1). + * - When to use: + * - This function is suitable for the same applications above but it allows to + * overcome the limitations of I2C_GetFlagStatus() function (see below). + * The returned value could be compared to events already defined in the + * library (stm32f10x_i2c.h) or to custom values defined by user. + * - This function is suitable when multiple flags are monitored at the same time. + * - At the opposite of I2C_CheckEvent() function, this function allows user to + * choose when an event is accepted (when all events flags are set and no + * other flags are set or just when the needed flags are set like + * I2C_CheckEvent() function). + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * 3) Flag-based state monitoring: + * Using the function I2C_GetFlagStatus() which simply returns the status of + * one single flag (ie. I2C_FLAG_RXNE ...). + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed (most I2C events + * are monitored through multiple flags). + * - Limitations: + * - When calling this function, the Status register is accessed. Some flags are + * cleared when the status register is accessed. So checking the status + * of one Flag, may clear other ones. + * - Function may need to be called twice or more in order to monitor one + * single event. + * + */ + +/** + * + * 1) Basic state monitoring + ******************************************************************************* + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); +/** + * + * 2) Advanced state monitoring + ******************************************************************************* + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); +/** + * + * 3) Flag-based state monitoring + ******************************************************************************* + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +/** + * + ******************************************************************************* + */ + +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_I2C_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h new file mode 100644 index 00000000..7f5ab764 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h @@ -0,0 +1,140 @@ +/** + ****************************************************************************** + * @file stm32f10x_iwdg.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the IWDG + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_IWDG_H +#define __STM32F10x_IWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup IWDG + * @{ + */ + +/** @defgroup IWDG_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Constants + * @{ + */ + +/** @defgroup IWDG_WriteAccess + * @{ + */ + +#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) +#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) +#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ + ((ACCESS) == IWDG_WriteAccess_Disable)) +/** + * @} + */ + +/** @defgroup IWDG_prescaler + * @{ + */ + +#define IWDG_Prescaler_4 ((uint8_t)0x00) +#define IWDG_Prescaler_8 ((uint8_t)0x01) +#define IWDG_Prescaler_16 ((uint8_t)0x02) +#define IWDG_Prescaler_32 ((uint8_t)0x03) +#define IWDG_Prescaler_64 ((uint8_t)0x04) +#define IWDG_Prescaler_128 ((uint8_t)0x05) +#define IWDG_Prescaler_256 ((uint8_t)0x06) +#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ + ((PRESCALER) == IWDG_Prescaler_8) || \ + ((PRESCALER) == IWDG_Prescaler_16) || \ + ((PRESCALER) == IWDG_Prescaler_32) || \ + ((PRESCALER) == IWDG_Prescaler_64) || \ + ((PRESCALER) == IWDG_Prescaler_128)|| \ + ((PRESCALER) == IWDG_Prescaler_256)) +/** + * @} + */ + +/** @defgroup IWDG_Flag + * @{ + */ + +#define IWDG_FLAG_PVU ((uint16_t)0x0001) +#define IWDG_FLAG_RVU ((uint16_t)0x0002) +#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) +#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions + * @{ + */ + +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); +void IWDG_SetReload(uint16_t Reload); +void IWDG_ReloadCounter(void); +void IWDG_Enable(void); +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_IWDG_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h new file mode 100644 index 00000000..76e6ce91 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h @@ -0,0 +1,156 @@ +/** + ****************************************************************************** + * @file stm32f10x_pwr.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_PWR_H +#define __STM32F10x_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/** @defgroup PWR_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PVD_detection_level + * @{ + */ + +#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000) +#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020) +#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040) +#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060) +#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080) +#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0) +#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0) +#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0) +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ + ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ + ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ + ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) +/** + * @} + */ + +/** @defgroup Regulator_state_is_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower ((uint32_t)0x00000001) +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU ((uint32_t)0x00000001) +#define PWR_FLAG_SB ((uint32_t)0x00000002) +#define PWR_FLAG_PVDO ((uint32_t)0x00000004) +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions + * @{ + */ + +void PWR_DeInit(void); +void PWR_BackupAccessCmd(FunctionalState NewState); +void PWR_PVDCmd(FunctionalState NewState); +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); +void PWR_WakeUpPinCmd(FunctionalState NewState); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_PWR_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h new file mode 100644 index 00000000..b3b7d821 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h @@ -0,0 +1,727 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RCC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RCC_H +#define __STM32F10x_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @defgroup RCC_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ + uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ +}RCC_ClocksTypeDef; + +/** + * @} + */ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup HSE_configuration + * @{ + */ + +#define RCC_HSE_OFF ((uint32_t)0x00000000) +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_HSE_Bypass ((uint32_t)0x00040000) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) + +/** + * @} + */ + +/** @defgroup PLL_entry_clock_source + * @{ + */ + +#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL) + #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) + #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div2)) +#else + #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_PREDIV1)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup PLL_multiplication_factor + * @{ + */ +#ifndef STM32F10X_CL + #define RCC_PLLMul_2 ((uint32_t)0x00000000) + #define RCC_PLLMul_3 ((uint32_t)0x00040000) + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_10 ((uint32_t)0x00200000) + #define RCC_PLLMul_11 ((uint32_t)0x00240000) + #define RCC_PLLMul_12 ((uint32_t)0x00280000) + #define RCC_PLLMul_13 ((uint32_t)0x002C0000) + #define RCC_PLLMul_14 ((uint32_t)0x00300000) + #define RCC_PLLMul_15 ((uint32_t)0x00340000) + #define RCC_PLLMul_16 ((uint32_t)0x00380000) + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ + ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ + ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ + ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ + ((MUL) == RCC_PLLMul_16)) + +#else + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) + + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_6_5)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup PREDIV1_division_factor + * @{ + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) + #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) + #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) + #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) + #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) + #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) + #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) + #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) + #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) + #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) + #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) + #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) + #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) + #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) + #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) + + #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ + ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ + ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ + ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ + ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ + ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ + ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ + ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) +#endif +/** + * @} + */ + + +/** @defgroup PREDIV1_clock_source + * @{ + */ +#ifdef STM32F10X_CL +/* PREDIV1 clock source (for STM32 connectivity line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ + ((SOURCE) == RCC_PREDIV1_Source_PLL2)) +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/* PREDIV1 clock source (for STM32 Value line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) +#endif +/** + * @} + */ + +#ifdef STM32F10X_CL +/** @defgroup PREDIV2_division_factor + * @{ + */ + + #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) + #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) + #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) + #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) + #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) + #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) + #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) + #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) + #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) + #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) + #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) + #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) + #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) + #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) + #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) + + #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ + ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ + ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ + ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ + ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ + ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ + ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ + ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) +/** + * @} + */ + + +/** @defgroup PLL2_multiplication_factor + * @{ + */ + + #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) + #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) + #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) + #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) + #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) + #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) + #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) + #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) + #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) + + #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ + ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ + ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ + ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ + ((MUL) == RCC_PLL2Mul_20)) +/** + * @} + */ + + +/** @defgroup PLL3_multiplication_factor + * @{ + */ + + #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) + #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) + #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) + #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) + #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) + #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) + #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) + #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) + #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) + + #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ + ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ + ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ + ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ + ((MUL) == RCC_PLL3Mul_20)) +/** + * @} + */ + +#endif /* STM32F10X_CL */ + + +/** @defgroup System_clock_source + * @{ + */ + +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup AHB_clock_source + * @{ + */ + +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup APB1_APB2_clock_source + * @{ + */ + +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_HCLK_Div4 ((uint32_t)0x00000500) +#define RCC_HCLK_Div8 ((uint32_t)0x00000600) +#define RCC_HCLK_Div16 ((uint32_t)0x00000700) +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_Interrupt_source + * @{ + */ + +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_CSS ((uint8_t)0x80) + +#ifndef STM32F10X_CL + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) + #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) +#else + #define RCC_IT_PLL2RDY ((uint8_t)0x20) + #define RCC_IT_PLL3RDY ((uint8_t)0x40) + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ + ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) + #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) +#endif /* STM32F10X_CL */ + + +/** + * @} + */ + +#ifndef STM32F10X_CL +/** @defgroup USB_Device_clock_source + * @{ + */ + + #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) + #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) + + #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ + ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) +/** + * @} + */ +#else +/** @defgroup USB_OTG_FS_clock_source + * @{ + */ + #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) + #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) + + #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ + ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +#ifdef STM32F10X_CL +/** @defgroup I2S2_clock_source + * @{ + */ + #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) +/** + * @} + */ + +/** @defgroup I2S3_clock_source + * @{ + */ + #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +/** @defgroup ADC_clock_source + * @{ + */ + +#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) +#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) +#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) +#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) +#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ + ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) +/** + * @} + */ + +/** @defgroup LSE_configuration + * @{ + */ + +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RTC_clock_source + * @{ + */ + +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) +#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) +/** + * @} + */ + +/** @defgroup AHB_peripheral + * @{ + */ + +#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) +#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) +#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) +#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) +#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) + +#ifndef STM32F10X_CL + #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) + #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) +#else + #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) + #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) + #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) + #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) + + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) + #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup APB2_peripheral + * @{ + */ + +#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) +#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) +#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) +#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) +#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) +#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) +#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) +#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) +#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) +#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000) +#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000) +#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) +#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000) + +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup APB1_peripheral + * @{ + */ + +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) +#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) +#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_USB ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) +#define RCC_APB1Periph_CEC ((uint32_t)0x40000000) + +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup Clock_source_to_output_on_MCO_pin + * @{ + */ + +#define RCC_MCO_NoClock ((uint8_t)0x00) +#define RCC_MCO_SYSCLK ((uint8_t)0x04) +#define RCC_MCO_HSI ((uint8_t)0x05) +#define RCC_MCO_HSE ((uint8_t)0x06) +#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) + +#ifndef STM32F10X_CL + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2)) +#else + #define RCC_MCO_PLL2CLK ((uint8_t)0x08) + #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) + #define RCC_MCO_XT1 ((uint8_t)0x0A) + #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) + + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ + ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ + ((MCO) == RCC_MCO_PLL3CLK)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ + +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) + +#ifndef STM32F10X_CL + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#else + #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) + #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#endif /* STM32F10X_CL */ + +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions + * @{ + */ + +void RCC_DeInit(void); +void RCC_HSEConfig(uint32_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); +#endif + +#ifdef STM32F10X_CL + void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); + void RCC_PLL2Config(uint32_t RCC_PLL2Mul); + void RCC_PLL2Cmd(FunctionalState NewState); + void RCC_PLL3Config(uint32_t RCC_PLL3Mul); + void RCC_PLL3Cmd(FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); + +#ifndef STM32F10X_CL + void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); +#else + void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); +#endif /* STM32F10X_CL */ + +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); + +#ifdef STM32F10X_CL + void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); + void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); +#endif /* STM32F10X_CL */ + +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +#ifdef STM32F10X_CL +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCOConfig(uint8_t RCC_MCO); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RCC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h new file mode 100644 index 00000000..214a5893 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h @@ -0,0 +1,135 @@ +/** + ****************************************************************************** + * @file stm32f10x_rtc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RTC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RTC_H +#define __STM32F10x_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/** @defgroup RTC_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Constants + * @{ + */ + +/** @defgroup RTC_interrupts_define + * @{ + */ + +#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */ +#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */ +#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */ +#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00)) +#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \ + ((IT) == RTC_IT_SEC)) +/** + * @} + */ + +/** @defgroup RTC_interrupts_flags + * @{ + */ + +#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */ +#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */ +#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */ +#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */ +#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */ +#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00)) +#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \ + ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \ + ((FLAG) == RTC_FLAG_SEC)) +#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions + * @{ + */ + +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState); +void RTC_EnterConfigMode(void); +void RTC_ExitConfigMode(void); +uint32_t RTC_GetCounter(void); +void RTC_SetCounter(uint32_t CounterValue); +void RTC_SetPrescaler(uint32_t PrescalerValue); +void RTC_SetAlarm(uint32_t AlarmValue); +uint32_t RTC_GetDivider(void); +void RTC_WaitForLastTask(void); +void RTC_WaitForSynchro(void); +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG); +void RTC_ClearFlag(uint16_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint16_t RTC_IT); +void RTC_ClearITPendingBit(uint16_t RTC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RTC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h new file mode 100644 index 00000000..40cfdedc --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h @@ -0,0 +1,531 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SDIO firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SDIO_H +#define __STM32F10x_SDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/** @defgroup SDIO_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between 0x00 and 0xFF. */ + +} SDIO_InitTypeDef; + +typedef struct +{ + uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register */ + + uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ + + uint32_t SDIO_Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +} SDIO_CmdInitTypeDef; + +typedef struct +{ + uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +} SDIO_DataInitTypeDef; + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ + +#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) +#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ + ((EDGE) == SDIO_ClockEdge_Falling)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ + +#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) +#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ + ((BYPASS) == SDIO_ClockBypass_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ + +#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) +#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ + ((SAVE) == SDIO_ClockPowerSave_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ + +#define SDIO_BusWide_1b ((uint32_t)0x00000000) +#define SDIO_BusWide_4b ((uint32_t)0x00000800) +#define SDIO_BusWide_8b ((uint32_t)0x00001000) +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ + ((WIDE) == SDIO_BusWide_8b)) + +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ + +#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) +#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ + ((CONTROL) == SDIO_HardwareFlowControl_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Power_State + * @{ + */ + +#define SDIO_PowerState_OFF ((uint32_t)0x00000000) +#define SDIO_PowerState_ON ((uint32_t)0x00000003) +#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) +/** + * @} + */ + + +/** @defgroup SDIO_Interrupt_sources + * @{ + */ + +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ + +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ + +#define SDIO_Response_No ((uint32_t)0x00000000) +#define SDIO_Response_Short ((uint32_t)0x00000040) +#define SDIO_Response_Long ((uint32_t)0x000000C0) +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ + ((RESPONSE) == SDIO_Response_Short) || \ + ((RESPONSE) == SDIO_Response_Long)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ + +#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ +#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ +#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ + ((WAIT) == SDIO_Wait_Pend)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ + +#define SDIO_CPSM_Disable ((uint32_t)0x00000000) +#define SDIO_CPSM_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ + +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ + +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ + +#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) +#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) +#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) +#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) +#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) +#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) +#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) +#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) +#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) +#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) +#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) +#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) +#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) +#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) +#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ + ((SIZE) == SDIO_DataBlockSize_2b) || \ + ((SIZE) == SDIO_DataBlockSize_4b) || \ + ((SIZE) == SDIO_DataBlockSize_8b) || \ + ((SIZE) == SDIO_DataBlockSize_16b) || \ + ((SIZE) == SDIO_DataBlockSize_32b) || \ + ((SIZE) == SDIO_DataBlockSize_64b) || \ + ((SIZE) == SDIO_DataBlockSize_128b) || \ + ((SIZE) == SDIO_DataBlockSize_256b) || \ + ((SIZE) == SDIO_DataBlockSize_512b) || \ + ((SIZE) == SDIO_DataBlockSize_1024b) || \ + ((SIZE) == SDIO_DataBlockSize_2048b) || \ + ((SIZE) == SDIO_DataBlockSize_4096b) || \ + ((SIZE) == SDIO_DataBlockSize_8192b) || \ + ((SIZE) == SDIO_DataBlockSize_16384b)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ + +#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) +#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ + ((DIR) == SDIO_TransferDir_ToSDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ + +#define SDIO_TransferMode_Block ((uint32_t)0x00000000) +#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ + ((MODE) == SDIO_TransferMode_Block)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ + +#define SDIO_DPSM_Disable ((uint32_t)0x00000000) +#define SDIO_DPSM_Enable ((uint32_t)0x00000001) +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ + +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ + +#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) +#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ + ((MODE) == SDIO_ReadWaitMode_DATA2)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Functions + * @{ + */ + +void SDIO_DeInit(void); +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_ClockCmd(FunctionalState NewState); +void SDIO_SetPowerState(uint32_t SDIO_PowerState); +uint32_t SDIO_GetPowerState(void); +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); +void SDIO_DMACmd(FunctionalState NewState); +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(void); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(void); +uint32_t SDIO_ReadData(void); +void SDIO_WriteData(uint32_t Data); +uint32_t SDIO_GetFIFOCount(void); +void SDIO_StartSDIOReadWait(FunctionalState NewState); +void SDIO_StopSDIOReadWait(FunctionalState NewState); +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); +void SDIO_SetSDIOOperation(FunctionalState NewState); +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); +void SDIO_CommandCompletionCmd(FunctionalState NewState); +void SDIO_CEATAITCmd(FunctionalState NewState); +void SDIO_SendCEATACmd(FunctionalState NewState); +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); +void SDIO_ClearFlag(uint32_t SDIO_FLAG); +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); +void SDIO_ClearITPendingBit(uint32_t SDIO_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_SDIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h new file mode 100644 index 00000000..6056c4c6 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h @@ -0,0 +1,487 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SPI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SPI_H +#define __STM32F10x_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/** @defgroup SPI_Exported_Types + * @{ + */ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler. + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/** + * @} + */ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ + ((DATASIZE) == SPI_DataSize_8b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx) || \ + ((MODE) == I2S_Mode_MasterRx) ) +/** + * @} + */ + +/** @defgroup I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) +#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) +#define I2S_IT_UDR ((uint8_t)0x53) +#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ + ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) +/** + * @} + */ + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) +#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions + * @{ + */ + +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_SPI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h new file mode 100644 index 00000000..cd7ac3e9 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h @@ -0,0 +1,1164 @@ +/** + ****************************************************************************** + * @file stm32f10x_tim.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the TIM firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_TIM_H +#define __STM32F10x_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/** @defgroup TIM_Exported_Types + * @{ + */ + +/** + * @brief TIM Time Base Init structure definition + * @note This structure is used with all TIMx except for TIM6 and TIM7. + */ + +typedef struct +{ + uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between 0x0000 and 0xFFFF. */ + + uint16_t TIM_ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_Clock_Division_CKD */ + + uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between 0x00 and 0xFF. + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_TimeBaseInitTypeDef; + +/** + * @brief TIM Output Compare Init structure definition + */ + +typedef struct +{ + uint16_t TIM_OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_state */ + + uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_N_state + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_OCInitTypeDef; + +/** + * @brief TIM Input Capture Init structure definition + */ + +typedef struct +{ + + uint16_t TIM_Channel; /*!< Specifies the TIM channel. + This parameter can be a value of @ref TIM_Channel */ + + uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint16_t TIM_ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between 0x0 and 0xF */ +} TIM_ICInitTypeDef; + +/** + * @brief BDTR structure definition + * @note This structure is used only with TIM1 and TIM8. + */ + +typedef struct +{ + + uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */ + + uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref Lock_level */ + + uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between 0x00 and 0xFF */ + + uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref Break_Input_enable_disable */ + + uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref Break_Polarity */ + + uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BDTRInitTypeDef; + +/** @defgroup TIM_Exported_constants + * @{ + */ + +#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10)|| \ + ((PERIPH) == TIM11)|| \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM13)|| \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST1: TIM 1 and 8 */ +#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8)) + +/* LIST2: TIM 1, 8, 15 16 and 17 */ +#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */ +#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8)) + +/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */ +#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */ +#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)) + +/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */ +#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM15)) + +/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */ +#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM15)) + +/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */ +#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10)|| \ + ((PERIPH) == TIM11)|| \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM13)|| \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */ +#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes + * @{ + */ + +#define TIM_OCMode_Timing ((uint16_t)0x0000) +#define TIM_OCMode_Active ((uint16_t)0x0010) +#define TIM_OCMode_Inactive ((uint16_t)0x0020) +#define TIM_OCMode_Toggle ((uint16_t)0x0030) +#define TIM_OCMode_PWM1 ((uint16_t)0x0060) +#define TIM_OCMode_PWM2 ((uint16_t)0x0070) +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2)) +#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2) || \ + ((MODE) == TIM_ForcedAction_Active) || \ + ((MODE) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode + * @{ + */ + +#define TIM_OPMode_Single ((uint16_t)0x0008) +#define TIM_OPMode_Repetitive ((uint16_t)0x0000) +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ + ((MODE) == TIM_OPMode_Repetitive)) +/** + * @} + */ + +/** @defgroup TIM_Channel + * @{ + */ + +#define TIM_Channel_1 ((uint16_t)0x0000) +#define TIM_Channel_2 ((uint16_t)0x0004) +#define TIM_Channel_3 ((uint16_t)0x0008) +#define TIM_Channel_4 ((uint16_t)0x000C) +#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3) || \ + ((CHANNEL) == TIM_Channel_4)) +#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2)) +#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Division_CKD + * @{ + */ + +#define TIM_CKD_DIV1 ((uint16_t)0x0000) +#define TIM_CKD_DIV2 ((uint16_t)0x0100) +#define TIM_CKD_DIV4 ((uint16_t)0x0200) +#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ + ((DIV) == TIM_CKD_DIV2) || \ + ((DIV) == TIM_CKD_DIV4)) +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode + * @{ + */ + +#define TIM_CounterMode_Up ((uint16_t)0x0000) +#define TIM_CounterMode_Down ((uint16_t)0x0010) +#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) +#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) +#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ + ((MODE) == TIM_CounterMode_Down) || \ + ((MODE) == TIM_CounterMode_CenterAligned1) || \ + ((MODE) == TIM_CounterMode_CenterAligned2) || \ + ((MODE) == TIM_CounterMode_CenterAligned3)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity + * @{ + */ + +#define TIM_OCPolarity_High ((uint16_t)0x0000) +#define TIM_OCPolarity_Low ((uint16_t)0x0002) +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ + ((POLARITY) == TIM_OCPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity + * @{ + */ + +#define TIM_OCNPolarity_High ((uint16_t)0x0000) +#define TIM_OCNPolarity_Low ((uint16_t)0x0008) +#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ + ((POLARITY) == TIM_OCNPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_state + * @{ + */ + +#define TIM_OutputState_Disable ((uint16_t)0x0000) +#define TIM_OutputState_Enable ((uint16_t)0x0001) +#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ + ((STATE) == TIM_OutputState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_state + * @{ + */ + +#define TIM_OutputNState_Disable ((uint16_t)0x0000) +#define TIM_OutputNState_Enable ((uint16_t)0x0004) +#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ + ((STATE) == TIM_OutputNState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_state + * @{ + */ + +#define TIM_CCx_Enable ((uint16_t)0x0001) +#define TIM_CCx_Disable ((uint16_t)0x0000) +#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ + ((CCX) == TIM_CCx_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_N_state + * @{ + */ + +#define TIM_CCxN_Enable ((uint16_t)0x0004) +#define TIM_CCxN_Disable ((uint16_t)0x0000) +#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ + ((CCXN) == TIM_CCxN_Disable)) +/** + * @} + */ + +/** @defgroup Break_Input_enable_disable + * @{ + */ + +#define TIM_Break_Enable ((uint16_t)0x1000) +#define TIM_Break_Disable ((uint16_t)0x0000) +#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ + ((STATE) == TIM_Break_Disable)) +/** + * @} + */ + +/** @defgroup Break_Polarity + * @{ + */ + +#define TIM_BreakPolarity_Low ((uint16_t)0x0000) +#define TIM_BreakPolarity_High ((uint16_t)0x2000) +#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ + ((POLARITY) == TIM_BreakPolarity_High)) +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset + * @{ + */ + +#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) +#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ + ((STATE) == TIM_AutomaticOutput_Disable)) +/** + * @} + */ + +/** @defgroup Lock_level + * @{ + */ + +#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) +#define TIM_LOCKLevel_1 ((uint16_t)0x0100) +#define TIM_LOCKLevel_2 ((uint16_t)0x0200) +#define TIM_LOCKLevel_3 ((uint16_t)0x0300) +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ + ((LEVEL) == TIM_LOCKLevel_1) || \ + ((LEVEL) == TIM_LOCKLevel_2) || \ + ((LEVEL) == TIM_LOCKLevel_3)) +/** + * @} + */ + +/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state + * @{ + */ + +#define TIM_OSSIState_Enable ((uint16_t)0x0400) +#define TIM_OSSIState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ + ((STATE) == TIM_OSSIState_Disable)) +/** + * @} + */ + +/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state + * @{ + */ + +#define TIM_OSSRState_Enable ((uint16_t)0x0800) +#define TIM_OSSRState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ + ((STATE) == TIM_OSSRState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State + * @{ + */ + +#define TIM_OCIdleState_Set ((uint16_t)0x0100) +#define TIM_OCIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ + ((STATE) == TIM_OCIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State + * @{ + */ + +#define TIM_OCNIdleState_Set ((uint16_t)0x0200) +#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ + ((STATE) == TIM_OCNIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity + * @{ + */ + +#define TIM_ICPolarity_Rising ((uint16_t)0x0000) +#define TIM_ICPolarity_Falling ((uint16_t)0x0002) +#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)) +#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)|| \ + ((POLARITY) == TIM_ICPolarity_BothEdge)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection + * @{ + */ + +#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively. */ +#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ + ((SELECTION) == TIM_ICSelection_IndirectTI) || \ + ((SELECTION) == TIM_ICSelection_TRC)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler + * @{ + */ + +#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ +#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ +#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ +#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_interrupt_sources + * @{ + */ + +#define TIM_IT_Update ((uint16_t)0x0001) +#define TIM_IT_CC1 ((uint16_t)0x0002) +#define TIM_IT_CC2 ((uint16_t)0x0004) +#define TIM_IT_CC3 ((uint16_t)0x0008) +#define TIM_IT_CC4 ((uint16_t)0x0010) +#define TIM_IT_COM ((uint16_t)0x0020) +#define TIM_IT_Trigger ((uint16_t)0x0040) +#define TIM_IT_Break ((uint16_t)0x0080) +#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) + +#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ + ((IT) == TIM_IT_CC1) || \ + ((IT) == TIM_IT_CC2) || \ + ((IT) == TIM_IT_CC3) || \ + ((IT) == TIM_IT_CC4) || \ + ((IT) == TIM_IT_COM) || \ + ((IT) == TIM_IT_Trigger) || \ + ((IT) == TIM_IT_Break)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address + * @{ + */ + +#define TIM_DMABase_CR1 ((uint16_t)0x0000) +#define TIM_DMABase_CR2 ((uint16_t)0x0001) +#define TIM_DMABase_SMCR ((uint16_t)0x0002) +#define TIM_DMABase_DIER ((uint16_t)0x0003) +#define TIM_DMABase_SR ((uint16_t)0x0004) +#define TIM_DMABase_EGR ((uint16_t)0x0005) +#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) +#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) +#define TIM_DMABase_CCER ((uint16_t)0x0008) +#define TIM_DMABase_CNT ((uint16_t)0x0009) +#define TIM_DMABase_PSC ((uint16_t)0x000A) +#define TIM_DMABase_ARR ((uint16_t)0x000B) +#define TIM_DMABase_RCR ((uint16_t)0x000C) +#define TIM_DMABase_CCR1 ((uint16_t)0x000D) +#define TIM_DMABase_CCR2 ((uint16_t)0x000E) +#define TIM_DMABase_CCR3 ((uint16_t)0x000F) +#define TIM_DMABase_CCR4 ((uint16_t)0x0010) +#define TIM_DMABase_BDTR ((uint16_t)0x0011) +#define TIM_DMABase_DCR ((uint16_t)0x0012) +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ + ((BASE) == TIM_DMABase_CR2) || \ + ((BASE) == TIM_DMABase_SMCR) || \ + ((BASE) == TIM_DMABase_DIER) || \ + ((BASE) == TIM_DMABase_SR) || \ + ((BASE) == TIM_DMABase_EGR) || \ + ((BASE) == TIM_DMABase_CCMR1) || \ + ((BASE) == TIM_DMABase_CCMR2) || \ + ((BASE) == TIM_DMABase_CCER) || \ + ((BASE) == TIM_DMABase_CNT) || \ + ((BASE) == TIM_DMABase_PSC) || \ + ((BASE) == TIM_DMABase_ARR) || \ + ((BASE) == TIM_DMABase_RCR) || \ + ((BASE) == TIM_DMABase_CCR1) || \ + ((BASE) == TIM_DMABase_CCR2) || \ + ((BASE) == TIM_DMABase_CCR3) || \ + ((BASE) == TIM_DMABase_CCR4) || \ + ((BASE) == TIM_DMABase_BDTR) || \ + ((BASE) == TIM_DMABase_DCR)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length + * @{ + */ + +#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) +#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) +#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) +#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) +#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) +#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) +#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) +#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) +#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) +#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) +#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) +#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) +#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) +#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) +#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) +#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) +#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) +#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ + ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_18Transfers)) +/** + * @} + */ + +/** @defgroup TIM_DMA_sources + * @{ + */ + +#define TIM_DMA_Update ((uint16_t)0x0100) +#define TIM_DMA_CC1 ((uint16_t)0x0200) +#define TIM_DMA_CC2 ((uint16_t)0x0400) +#define TIM_DMA_CC3 ((uint16_t)0x0800) +#define TIM_DMA_CC4 ((uint16_t)0x1000) +#define TIM_DMA_COM ((uint16_t)0x2000) +#define TIM_DMA_Trigger ((uint16_t)0x4000) +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Prescaler + * @{ + */ + +#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) +#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) +#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) +#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) +#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Internal_Trigger_Selection + * @{ + */ + +#define TIM_TS_ITR0 ((uint16_t)0x0000) +#define TIM_TS_ITR1 ((uint16_t)0x0010) +#define TIM_TS_ITR2 ((uint16_t)0x0020) +#define TIM_TS_ITR3 ((uint16_t)0x0030) +#define TIM_TS_TI1F_ED ((uint16_t)0x0040) +#define TIM_TS_TI1FP1 ((uint16_t)0x0050) +#define TIM_TS_TI2FP2 ((uint16_t)0x0060) +#define TIM_TS_ETRF ((uint16_t)0x0070) +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) +#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3)) +/** + * @} + */ + +/** @defgroup TIM_TIx_External_Clock_Source + * @{ + */ + +#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) +#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) +#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) +#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ + ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ + ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Polarity + * @{ + */ +#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) +#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) +#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ + ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) +/** + * @} + */ + +/** @defgroup TIM_Prescaler_Reload_Mode + * @{ + */ + +#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) +#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) +#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ + ((RELOAD) == TIM_PSCReloadMode_Immediate)) +/** + * @} + */ + +/** @defgroup TIM_Forced_Action + * @{ + */ + +#define TIM_ForcedAction_Active ((uint16_t)0x0050) +#define TIM_ForcedAction_InActive ((uint16_t)0x0040) +#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ + ((ACTION) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode + * @{ + */ + +#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) +#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) +#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ + ((MODE) == TIM_EncoderMode_TI2) || \ + ((MODE) == TIM_EncoderMode_TI12)) +/** + * @} + */ + + +/** @defgroup TIM_Event_Source + * @{ + */ + +#define TIM_EventSource_Update ((uint16_t)0x0001) +#define TIM_EventSource_CC1 ((uint16_t)0x0002) +#define TIM_EventSource_CC2 ((uint16_t)0x0004) +#define TIM_EventSource_CC3 ((uint16_t)0x0008) +#define TIM_EventSource_CC4 ((uint16_t)0x0010) +#define TIM_EventSource_COM ((uint16_t)0x0020) +#define TIM_EventSource_Trigger ((uint16_t)0x0040) +#define TIM_EventSource_Break ((uint16_t)0x0080) +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_Update_Source + * @{ + */ + +#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. */ +#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ +#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ + ((SOURCE) == TIM_UpdateSource_Regular)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Preload_State + * @{ + */ + +#define TIM_OCPreload_Enable ((uint16_t)0x0008) +#define TIM_OCPreload_Disable ((uint16_t)0x0000) +#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ + ((STATE) == TIM_OCPreload_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Fast_State + * @{ + */ + +#define TIM_OCFast_Enable ((uint16_t)0x0004) +#define TIM_OCFast_Disable ((uint16_t)0x0000) +#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ + ((STATE) == TIM_OCFast_Disable)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Clear_State + * @{ + */ + +#define TIM_OCClear_Enable ((uint16_t)0x0080) +#define TIM_OCClear_Disable ((uint16_t)0x0000) +#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ + ((STATE) == TIM_OCClear_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Output_Source + * @{ + */ + +#define TIM_TRGOSource_Reset ((uint16_t)0x0000) +#define TIM_TRGOSource_Enable ((uint16_t)0x0010) +#define TIM_TRGOSource_Update ((uint16_t)0x0020) +#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) +#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) +#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) +#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) +#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ + ((SOURCE) == TIM_TRGOSource_Enable) || \ + ((SOURCE) == TIM_TRGOSource_Update) || \ + ((SOURCE) == TIM_TRGOSource_OC1) || \ + ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC4Ref)) +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode + * @{ + */ + +#define TIM_SlaveMode_Reset ((uint16_t)0x0004) +#define TIM_SlaveMode_Gated ((uint16_t)0x0005) +#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) +#define TIM_SlaveMode_External1 ((uint16_t)0x0007) +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ + ((MODE) == TIM_SlaveMode_Gated) || \ + ((MODE) == TIM_SlaveMode_Trigger) || \ + ((MODE) == TIM_SlaveMode_External1)) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode + * @{ + */ + +#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) +#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ + ((STATE) == TIM_MasterSlaveMode_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Flags + * @{ + */ + +#define TIM_FLAG_Update ((uint16_t)0x0001) +#define TIM_FLAG_CC1 ((uint16_t)0x0002) +#define TIM_FLAG_CC2 ((uint16_t)0x0004) +#define TIM_FLAG_CC3 ((uint16_t)0x0008) +#define TIM_FLAG_CC4 ((uint16_t)0x0010) +#define TIM_FLAG_COM ((uint16_t)0x0020) +#define TIM_FLAG_Trigger ((uint16_t)0x0040) +#define TIM_FLAG_Break ((uint16_t)0x0080) +#define TIM_FLAG_CC1OF ((uint16_t)0x0200) +#define TIM_FLAG_CC2OF ((uint16_t)0x0400) +#define TIM_FLAG_CC3OF ((uint16_t)0x0800) +#define TIM_FLAG_CC4OF ((uint16_t)0x1000) +#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ + ((FLAG) == TIM_FLAG_CC1) || \ + ((FLAG) == TIM_FLAG_CC2) || \ + ((FLAG) == TIM_FLAG_CC3) || \ + ((FLAG) == TIM_FLAG_CC4) || \ + ((FLAG) == TIM_FLAG_COM) || \ + ((FLAG) == TIM_FLAG_Trigger) || \ + ((FLAG) == TIM_FLAG_Break) || \ + ((FLAG) == TIM_FLAG_CC1OF) || \ + ((FLAG) == TIM_FLAG_CC2OF) || \ + ((FLAG) == TIM_FLAG_CC3OF) || \ + ((FLAG) == TIM_FLAG_CC4OF)) + + +#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Filer_Value + * @{ + */ + +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Filter + * @{ + */ + +#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_Legacy + * @{ + */ + +#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer +#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers +#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers +#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers +#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers +#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers +#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers +#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers +#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers +#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers +#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers +#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers +#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers +#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers +#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers +#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers +#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers +#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions + * @{ + */ + +void TIM_DeInit(TIM_TypeDef* TIMx); +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); +void TIM_InternalClockConfig(TIM_TypeDef* TIMx); +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter); +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); +void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter); +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload); +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1); +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2); +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3); +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4); +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); +uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx); +uint16_t TIM_GetCounter(TIM_TypeDef* TIMx); +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_TIM_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h new file mode 100644 index 00000000..61ae249a --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h @@ -0,0 +1,412 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_USART_H +#define __STM32F10x_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/** @defgroup USART_Exported_Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ + + uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + + uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/** + * @} + */ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4) || \ + ((PERIPH) == UART5)) + +#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3)) + +#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4)) +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_0_5) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) +#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE ((uint16_t)0x0360) +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) +#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ + +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) + +#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) +#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ + ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ + || ((USART_FLAG) != USART_FLAG_CTS)) +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) +#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions + * @{ + */ + +void USART_DeInit(USART_TypeDef* USARTx); +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); +void USART_SendBreak(USART_TypeDef* USARTx); +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_USART_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h new file mode 100644 index 00000000..cd573da4 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h @@ -0,0 +1,115 @@ +/** + ****************************************************************************** + * @file stm32f10x_wwdg.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the WWDG firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_WWDG_H +#define __STM32F10x_WWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/** @defgroup WWDG_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Constants + * @{ + */ + +/** @defgroup WWDG_Prescaler + * @{ + */ + +#define WWDG_Prescaler_1 ((uint32_t)0x00000000) +#define WWDG_Prescaler_2 ((uint32_t)0x00000080) +#define WWDG_Prescaler_4 ((uint32_t)0x00000100) +#define WWDG_Prescaler_8 ((uint32_t)0x00000180) +#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ + ((PRESCALER) == WWDG_Prescaler_2) || \ + ((PRESCALER) == WWDG_Prescaler_4) || \ + ((PRESCALER) == WWDG_Prescaler_8)) +#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) +#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions + * @{ + */ + +void WWDG_DeInit(void); +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); +void WWDG_SetWindowValue(uint8_t WindowValue); +void WWDG_EnableIT(void); +void WWDG_SetCounter(uint8_t Counter); +void WWDG_Enable(uint8_t Counter); +FlagStatus WWDG_GetFlagStatus(void); +void WWDG_ClearFlag(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_WWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/misc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/misc.c new file mode 100644 index 00000000..ec9165f7 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/misc.c @@ -0,0 +1,225 @@ +/** + ****************************************************************************** + * @file misc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "misc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/** @defgroup MISC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Defines + * @{ + */ + +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) +/** + * @} + */ + +/** @defgroup MISC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Functions + * @{ + */ + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ + SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; +} + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; + tmppre = (0x4 - tmppriority); + tmpsub = tmpsub >> tmppriority; + + tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; + tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; + tmppriority = tmppriority << 0x04; + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values: + * @arg NVIC_VectTab_RAM + * @arg NVIC_VectTab_FLASH + * @param Offset: Vector Table base offset field. This value must be a multiple + * of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) +{ + /* Check the parameters */ + assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); + assert_param(IS_NVIC_OFFSET(Offset)); + + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND + * @arg NVIC_LP_SLEEPDEEP + * @arg NVIC_LP_SLEEPONEXIT + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c new file mode 100644 index 00000000..916a096d --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c @@ -0,0 +1,1307 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the ADC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_adc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/** @defgroup ADC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Defines + * @{ + */ + +/* ADC DISCNUM mask */ +#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) + +/* ADC DISCEN mask */ +#define CR1_DISCEN_Set ((uint32_t)0x00000800) +#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) + +/* ADC JAUTO mask */ +#define CR1_JAUTO_Set ((uint32_t)0x00000400) +#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) + +/* ADC JDISCEN mask */ +#define CR1_JDISCEN_Set ((uint32_t)0x00001000) +#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) + +/* ADC AWDCH mask */ +#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) + +/* CR1 register Mask */ +#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF) + +/* ADC ADON mask */ +#define CR2_ADON_Set ((uint32_t)0x00000001) +#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE) + +/* ADC DMA mask */ +#define CR2_DMA_Set ((uint32_t)0x00000100) +#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF) + +/* ADC RSTCAL mask */ +#define CR2_RSTCAL_Set ((uint32_t)0x00000008) + +/* ADC CAL mask */ +#define CR2_CAL_Set ((uint32_t)0x00000004) + +/* ADC SWSTART mask */ +#define CR2_SWSTART_Set ((uint32_t)0x00400000) + +/* ADC EXTTRIG mask */ +#define CR2_EXTTRIG_Set ((uint32_t)0x00100000) +#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) + +/* ADC Software start mask */ +#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) +#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) + +/* ADC JEXTSEL mask */ +#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) + +/* ADC JEXTTRIG mask */ +#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000) +#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) + +/* ADC JSWSTART mask */ +#define CR2_JSWSTART_Set ((uint32_t)0x00200000) + +/* ADC injected software start mask */ +#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) +#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) + +/* ADC TSPD mask */ +#define CR2_TSVREFE_Set ((uint32_t)0x00800000) +#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) + +/* CR2 register Mask */ +#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) + +/* ADC SQx mask */ +#define SQR3_SQ_Set ((uint32_t)0x0000001F) +#define SQR2_SQ_Set ((uint32_t)0x0000001F) +#define SQR1_SQ_Set ((uint32_t)0x0000001F) + +/* SQR1 register Mask */ +#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) + +/* ADC JSQx mask */ +#define JSQR_JSQ_Set ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define JSQR_JL_Set ((uint32_t)0x00300000) +#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SMPR1_SMP_Set ((uint32_t)0x00000007) +#define SMPR2_SMP_Set ((uint32_t)0x00000007) + +/* ADC JDRx registers offset */ +#define JDR_Offset ((uint8_t)0x28) + +/* ADC1 DR register base address */ +#define DR_ADDRESS ((uint32_t)0x4001244C) + +/** + * @} + */ + +/** @defgroup ADC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the ADCx peripheral registers to their default reset values. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_DeInit(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + if (ADCx == ADC1) + { + /* Enable ADC1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + /* Release ADC1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } + else if (ADCx == ADC2) + { + /* Enable ADC2 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); + /* Release ADC2 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); + } + else + { + if (ADCx == ADC3) + { + /* Enable ADC3 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); + /* Release ADC3 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); + } + } +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); + + /*---------------------------- ADCx CR1 Configuration -----------------*/ + /* Get the ADCx CR1 value */ + tmpreg1 = ADCx->CR1; + /* Clear DUALMOD and SCAN bits */ + tmpreg1 &= CR1_CLEAR_Mask; + /* Configure ADCx: Dual mode and scan conversion mode */ + /* Set DUALMOD bits according to ADC_Mode value */ + /* Set SCAN bit according to ADC_ScanConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8)); + /* Write to ADCx CR1 */ + ADCx->CR1 = tmpreg1; + + /*---------------------------- ADCx CR2 Configuration -----------------*/ + /* Get the ADCx CR2 value */ + tmpreg1 = ADCx->CR2; + /* Clear CONT, ALIGN and EXTSEL bits */ + tmpreg1 &= CR2_CLEAR_Mask; + /* Configure ADCx: external trigger event and continuous conversion mode */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | + ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + /* Write to ADCx CR2 */ + ADCx->CR2 = tmpreg1; + + /*---------------------------- ADCx SQR1 Configuration -----------------*/ + /* Get the ADCx SQR1 value */ + tmpreg1 = ADCx->SQR1; + /* Clear L bits */ + tmpreg1 &= SQR1_CLEAR_Mask; + /* Configure ADCx: regular channel sequence length */ + /* Set L bits according to ADC_NbrOfChannel value */ + tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1); + tmpreg1 |= (uint32_t)tmpreg2 << 20; + /* Write to ADCx SQR1 */ + ADCx->SQR1 = tmpreg1; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Mode member */ + ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; + /* initialize the ADC_ScanConvMode member */ + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + /* Initialize the ADC_NbrOfChannel member */ + ADC_InitStruct->ADC_NbrOfChannel = 1; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ADON bit to wake up the ADC from power down mode */ + ADCx->CR2 |= CR2_ADON_Set; + } + else + { + /* Disable the selected ADC peripheral */ + ADCx->CR2 &= CR2_ADON_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1 or 3 to select the ADC peripheral. + * Note: ADC2 hasn't a DMA capability. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_DMA_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CR2 |= CR2_DMA_Set; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CR2 &= CR2_DMA_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)ADC_IT; + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->CR1 |= itmask; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->CR1 &= (~(uint32_t)itmask); + } +} + +/** + * @brief Resets the selected ADC calibration registers. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_ResetCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Resets the selected ADC calibration registers */ + ADCx->CR2 |= CR2_RSTCAL_Set; +} + +/** + * @brief Gets the selected ADC reset calibration registers status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC reset calibration registers (SET or RESET). + */ +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of RSTCAL bit */ + if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET) + { + /* RSTCAL bit is set */ + bitstatus = SET; + } + else + { + /* RSTCAL bit is reset */ + bitstatus = RESET; + } + /* Return the RSTCAL bit status */ + return bitstatus; +} + +/** + * @brief Starts the selected ADC calibration process. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_StartCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Enable the selected ADC calibration process */ + ADCx->CR2 |= CR2_CAL_Set; +} + +/** + * @brief Gets the selected ADC calibration status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC calibration (SET or RESET). + */ +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of CAL bit */ + if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET) + { + /* CAL bit is set: calibration on going */ + bitstatus = SET; + } + else + { + /* CAL bit is reset: end of calibration */ + bitstatus = RESET; + } + /* Return the CAL bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the selected ADC software start conversion . + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event and start the selected + ADC conversion */ + ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event and stop the selected + ADC conversion */ + ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of SWSTART bit */ + if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET) + { + /* SWSTART bit is set */ + bitstatus = SET; + } + else + { + /* SWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the SWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures the discontinuous mode for the selected ADC regular + * group channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Number: specifies the discontinuous mode regular channel + * count value. This number must be between 1 and 8. + * @retval None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); + /* Get the old register value */ + tmpreg1 = ADCx->CR1; + /* Clear the old discontinuous mode channel count */ + tmpreg1 &= CR1_DISCNUM_Reset; + /* Set the discontinuous mode channel count */ + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + /* Store the new register value */ + ADCx->CR1 = tmpreg1; +} + +/** + * @brief Enables or disables the discontinuous mode on regular group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on regular group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + ADCx->CR1 |= CR1_DISCEN_Set; + } + else + { + /* Disable the selected ADC regular discontinuous mode */ + ADCx->CR1 &= CR1_DISCEN_Reset; + } +} + +/** + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_REGULAR_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* For Rank 1 to 6 */ + if (Rank < 7) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR3; + /* Calculate the mask to clear */ + tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR3 = tmpreg1; + } + /* For Rank 7 to 12 */ + else if (Rank < 13) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR2; + /* Calculate the mask to clear */ + tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR2 = tmpreg1; + } + /* For Rank 13 to 16 */ + else + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR1; + /* Calculate the mask to clear */ + tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR1 = tmpreg1; + } +} + +/** + * @brief Enables or disables the ADCx conversion through external trigger. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event */ + ADCx->CR2 |= CR2_EXTTRIG_Set; + } + else + { + /* Disable the selected ADC conversion on external event */ + ADCx->CR2 &= CR2_EXTTRIG_Reset; + } +} + +/** + * @brief Returns the last ADCx conversion result data for regular channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. + * @retval The Data conversion value. + */ +uint32_t ADC_GetDualModeConversionValue(void) +{ + /* Return the dual mode conversion value */ + return (*(__IO uint32_t *) DR_ADDRESS); +} + +/** + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC auto injected conversion + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC automatic injected group conversion */ + ADCx->CR1 |= CR1_JAUTO_Set; + } + else + { + /* Disable the selected ADC automatic injected group conversion */ + ADCx->CR1 &= CR1_JAUTO_Reset; + } +} + +/** + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on injected group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC injected discontinuous mode */ + ADCx->CR1 |= CR1_JDISCEN_Set; + } + else + { + /* Disable the selected ADC injected discontinuous mode */ + ADCx->CR1 &= CR1_JDISCEN_Reset; + } +} + +/** + * @brief Configures the ADCx external trigger for injected channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 + * capture compare4 event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not + * by external trigger (for ADC1, ADC2 and ADC3) + * @retval None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external event selection for injected group */ + tmpreg &= CR2_JEXTSEL_Reset; + /* Set the external event selection for injected group */ + tmpreg |= ADC_ExternalTrigInjecConv; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Enables or disables the ADCx injected channels conversion through + * external trigger + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of + * injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC external event selection for injected group */ + ADCx->CR2 |= CR2_JEXTTRIG_Set; + } + else + { + /* Disable the selected ADC external event selection for injected group */ + ADCx->CR2 &= CR2_JEXTTRIG_Reset; + } +} + +/** + * @brief Enables or disables the selected ADC start of the injected + * channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion for injected group on external event and start the selected + ADC injected conversion */ + ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event for injected group and stop the selected + ADC injected conversion */ + ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start injected conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start injected conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of JSWSTART bit */ + if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET) + { + /* JSWSTART bit is set */ + bitstatus = SET; + } + else + { + /* JSWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the JSWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_INJECTED_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* Rank configuration */ + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Get JL value: Number = JL+1 */ + tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; + /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Clear the old JSQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Set the JSQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Configures the sequencer length for injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Length: The sequencer length. + * This parameter must be a number between 1 to 4. + * @retval None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_LENGTH(Length)); + + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Clear the old injected sequnence lenght JL bits */ + tmpreg1 &= JSQR_JL_Reset; + /* Set the injected sequnence lenght JL bits */ + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Set the injected channels conversion value offset + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the ADC injected channel to set its offset. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @param Offset: the offset value for the selected ADC injected channel + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + assert_param(IS_ADC_OFFSET(Offset)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + /* Set the selected injected channel data offset */ + *(__IO uint32_t *) tmp = (uint32_t)Offset; +} + +/** + * @brief Returns the ADC injected channel conversion result + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the converted ADC injected channel. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @retval The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + JDR_Offset; + + /* Returns the selected injected channel conversion data value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +/** + * @brief Enables or disables the analog watchdog on single/all regular + * or injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel + * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel + * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel + * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel + * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel + * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels + * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear AWDEN, AWDENJ and AWDSGL bits */ + tmpreg &= CR1_AWDMode_Reset; + /* Set the analog watchdog enable mode */ + tmpreg |= ADC_AnalogWatchdog; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + /* Set the ADCx high threshold */ + ADCx->HTR = HighThreshold; + /* Set the ADCx low threshold */ + ADCx->LTR = LowThreshold; +} + +/** + * @brief Configures the analog watchdog guarded single channel + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear the Analog watchdog channel select bits */ + tmpreg &= CR1_AWDCH_Reset; + /* Set the Analog watchdog channel */ + tmpreg |= ADC_Channel; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Enables or disables the temperature sensor and Vrefint channel. + * @param NewState: new state of the temperature sensor. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the temperature sensor and Vrefint channel*/ + ADC1->CR2 |= CR2_TSVREFE_Set; + } + else + { + /* Disable the temperature sensor and Vrefint channel*/ + ADC1->CR2 &= CR2_TSVREFE_Reset; + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + /* Check the status of the specified ADC flag */ + if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + /* Clear the selected ADC flags */ + ADCx->SR = ~(uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = ADC_IT >> 8; + /* Get the ADC_IT enable bit status */ + enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ; + /* Check the status of the specified ADC interrupt */ + if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)(ADC_IT >> 8); + /* Clear the selected ADC interrupt pending bits */ + ADCx->SR = ~(uint32_t)itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c new file mode 100644 index 00000000..3004b9ef --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the BKP firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_bkp.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup BKP + * @brief BKP driver modules + * @{ + */ + +/** @defgroup BKP_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Defines + * @{ + */ + +/* ------------ BKP registers bit address in the alias region --------------- */ +#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) + +/* --- CR Register ----*/ + +/* Alias word address of TPAL bit */ +#define CR_OFFSET (BKP_OFFSET + 0x30) +#define TPAL_BitNumber 0x01 +#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) + +/* Alias word address of TPE bit */ +#define TPE_BitNumber 0x00 +#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TPIE bit */ +#define CSR_OFFSET (BKP_OFFSET + 0x34) +#define TPIE_BitNumber 0x02 +#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) + +/* Alias word address of TIF bit */ +#define TIF_BitNumber 0x09 +#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) + +/* Alias word address of TEF bit */ +#define TEF_BitNumber 0x08 +#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) + +/* ---------------------- BKP registers bit mask ------------------------ */ + +/* RTCCR register bit mask */ +#define RTCCR_CAL_MASK ((uint16_t)0xFF80) +#define RTCCR_MASK ((uint16_t)0xFC7F) + +/** + * @} + */ + + +/** @defgroup BKP_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the BKP peripheral registers to their default reset values. + * @param None + * @retval None + */ +void BKP_DeInit(void) +{ + RCC_BackupResetCmd(ENABLE); + RCC_BackupResetCmd(DISABLE); +} + +/** + * @brief Configures the Tamper Pin active level. + * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. + * This parameter can be one of the following values: + * @arg BKP_TamperPinLevel_High: Tamper pin active on high level + * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level + * @retval None + */ +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) +{ + /* Check the parameters */ + assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); + *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; +} + +/** + * @brief Enables or disables the Tamper Pin activation. + * @param NewState: new state of the Tamper Pin activation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_TamperPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Tamper Pin Interrupt. + * @param NewState: new state of the Tamper Pin Interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; +} + +/** + * @brief Select the RTC output source to output on the Tamper pin. + * @param BKP_RTCOutputSource: specifies the RTC output source. + * This parameter can be one of the following values: + * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. + * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency + * divided by 64 on the Tamper pin. + * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on + * the Tamper pin. + * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on + * the Tamper pin. + * @retval None + */ +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); + tmpreg = BKP->RTCCR; + /* Clear CCO, ASOE and ASOS bits */ + tmpreg &= RTCCR_MASK; + + /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ + tmpreg |= BKP_RTCOutputSource; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Sets RTC Clock Calibration value. + * @param CalibrationValue: specifies the RTC Clock Calibration value. + * This parameter must be a number between 0 and 0x7F. + * @retval None + */ +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); + tmpreg = BKP->RTCCR; + /* Clear CAL[6:0] bits */ + tmpreg &= RTCCR_CAL_MASK; + /* Set CAL[6:0] bits according to CalibrationValue value */ + tmpreg |= CalibrationValue; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Writes user data to the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @param Data: data to write + * @retval None + */ +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Reads data from the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @retval The content of the specified Data Backup Register + */ +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Checks whether the Tamper Pin Event flag is set or not. + * @param None + * @retval The new state of the Tamper Pin Event flag (SET or RESET). + */ +FlagStatus BKP_GetFlagStatus(void) +{ + return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); +} + +/** + * @brief Clears Tamper Pin Event pending flag. + * @param None + * @retval None + */ +void BKP_ClearFlag(void) +{ + /* Set CTE bit to clear Tamper Pin Event flag */ + BKP->CSR |= BKP_CSR_CTE; +} + +/** + * @brief Checks whether the Tamper Pin Interrupt has occurred or not. + * @param None + * @retval The new state of the Tamper Pin Interrupt (SET or RESET). + */ +ITStatus BKP_GetITStatus(void) +{ + return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); +} + +/** + * @brief Clears Tamper Pin Interrupt pending bit. + * @param None + * @retval None + */ +void BKP_ClearITPendingBit(void) +{ + /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ + BKP->CSR |= BKP_CSR_CTI; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c new file mode 100644 index 00000000..607d6924 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c @@ -0,0 +1,1415 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CAN firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_can.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CAN + * @brief CAN driver modules + * @{ + */ + +/** @defgroup CAN_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Defines + * @{ + */ + +/* CAN Master Control Register bits */ + +#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ + +/* CAN Mailbox Transmit Request */ +#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ + +/* CAN Filter Master Register bits */ +#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ + +/* Time out for INAK bit */ +#define INAK_TIMEOUT ((uint32_t)0x0000FFFF) +/* Time out for SLAK bit */ +#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF) + + + +/* Flags in TSR register */ +#define CAN_FLAGS_TSR ((uint32_t)0x08000000) +/* Flags in RF1R register */ +#define CAN_FLAGS_RF1R ((uint32_t)0x04000000) +/* Flags in RF0R register */ +#define CAN_FLAGS_RF0R ((uint32_t)0x02000000) +/* Flags in MSR register */ +#define CAN_FLAGS_MSR ((uint32_t)0x01000000) +/* Flags in ESR register */ +#define CAN_FLAGS_ESR ((uint32_t)0x00F00000) + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) + + + +#define CAN_MODE_MASK ((uint32_t) 0x00000003) +/** + * @} + */ + +/** @defgroup CAN_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_FunctionPrototypes + * @{ + */ + +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); + +/** + * @} + */ + +/** @defgroup CAN_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the CAN peripheral registers to their default reset values. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval None. + */ +void CAN_DeInit(CAN_TypeDef* CANx) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + if (CANx == CAN1) + { + /* Enable CAN1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); + /* Release CAN1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); + } + else + { + /* Enable CAN2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); + /* Release CAN2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); + } +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * @param CANx: where x can be 1 or 2 to to select the CAN + * peripheral. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that + * contains the configuration information for the + * CAN peripheral. + * @retval Constant indicates initialization succeed which will be + * CAN_InitStatus_Failed or CAN_InitStatus_Success. + */ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) +{ + uint8_t InitStatus = CAN_InitStatus_Failed; + uint32_t wait_ack = 0x00000000; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); + assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); + assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); + assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); + assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); + assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); + + /* Exit from sleep mode */ + CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP); + + /* Request initialisation */ + CANx->MCR |= CAN_MCR_INRQ ; + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* Check acknowledge */ + if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + /* Set the time triggered communication mode */ + if (CAN_InitStruct->CAN_TTCM == ENABLE) + { + CANx->MCR |= CAN_MCR_TTCM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM; + } + + /* Set the automatic bus-off management */ + if (CAN_InitStruct->CAN_ABOM == ENABLE) + { + CANx->MCR |= CAN_MCR_ABOM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM; + } + + /* Set the automatic wake-up mode */ + if (CAN_InitStruct->CAN_AWUM == ENABLE) + { + CANx->MCR |= CAN_MCR_AWUM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM; + } + + /* Set the no automatic retransmission */ + if (CAN_InitStruct->CAN_NART == ENABLE) + { + CANx->MCR |= CAN_MCR_NART; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_NART; + } + + /* Set the receive FIFO locked mode */ + if (CAN_InitStruct->CAN_RFLM == ENABLE) + { + CANx->MCR |= CAN_MCR_RFLM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM; + } + + /* Set the transmit FIFO priority */ + if (CAN_InitStruct->CAN_TXFP == ENABLE) + { + CANx->MCR |= CAN_MCR_TXFP; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP; + } + + /* Set the bit timing register */ + CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ + ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ + ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ + ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ + ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); + + /* Request leave initialisation */ + CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ; + + /* Wait the acknowledge */ + wait_ack = 0; + + while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* ...and check acknowledged */ + if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + InitStatus = CAN_InitStatus_Success ; + } + } + + /* At this step, return the status of initialization */ + return InitStatus; +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_FilterInitStruct. + * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef + * structure that contains the configuration + * information. + * @retval None. + */ +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) +{ + uint32_t filter_number_bit_pos = 0; + /* Check the parameters */ + assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); + assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); + assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); + assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); + assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); + + filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; + + /* Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Filter Deactivation */ + CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos; + + /* Filter Scale */ + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) + { + /* 16-bit scale for the filter */ + CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos; + + /* First 16-bit identifier and First 16-bit mask */ + /* Or First 16-bit identifier and Second 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + /* Second 16-bit identifier and Second 16-bit mask */ + /* Or Third 16-bit identifier and Fourth 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); + } + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) + { + /* 32-bit scale for the filter */ + CAN1->FS1R |= filter_number_bit_pos; + /* 32-bit identifier or First 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + /* 32-bit mask or Second 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); + } + + /* Filter Mode */ + if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) + { + /*Id/Mask mode for the filter*/ + CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos; + } + else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ + { + /*Identifier list mode for the filter*/ + CAN1->FM1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter FIFO assignment */ + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) + { + /* FIFO 0 assignation for the filter */ + CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) + { + /* FIFO 1 assignation for the filter */ + CAN1->FFA1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter activation */ + if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) + { + CAN1->FA1R |= filter_number_bit_pos; + } + + /* Leave the initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Fills each CAN_InitStruct member with its default value. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which + * will be initialized. + * @retval None. + */ +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) +{ + /* Reset CAN init structure parameters values */ + + /* Initialize the time triggered communication mode */ + CAN_InitStruct->CAN_TTCM = DISABLE; + + /* Initialize the automatic bus-off management */ + CAN_InitStruct->CAN_ABOM = DISABLE; + + /* Initialize the automatic wake-up mode */ + CAN_InitStruct->CAN_AWUM = DISABLE; + + /* Initialize the no automatic retransmission */ + CAN_InitStruct->CAN_NART = DISABLE; + + /* Initialize the receive FIFO locked mode */ + CAN_InitStruct->CAN_RFLM = DISABLE; + + /* Initialize the transmit FIFO priority */ + CAN_InitStruct->CAN_TXFP = DISABLE; + + /* Initialize the CAN_Mode member */ + CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; + + /* Initialize the CAN_SJW member */ + CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; + + /* Initialize the CAN_BS1 member */ + CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; + + /* Initialize the CAN_BS2 member */ + CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; + + /* Initialize the CAN_Prescaler member */ + CAN_InitStruct->CAN_Prescaler = 1; +} + +/** + * @brief Select the start bank filter for slave CAN. + * @note This function applies only to STM32 Connectivity line devices. + * @param CAN_BankNumber: Select the start slave bank filter from 1..27. + * @retval None. + */ +void CAN_SlaveStartBank(uint8_t CAN_BankNumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); + + /* Enter Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Select the start slave bank */ + CAN1->FMR &= (uint32_t)0xFFFFC0F1 ; + CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8; + + /* Leave Initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Enables or disables the DBG Freeze for CAN. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: new state of the CAN peripheral. This parameter can + * be: ENABLE or DISABLE. + * @retval None. + */ +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Debug Freeze */ + CANx->MCR |= MCR_DBF; + } + else + { + /* Disable Debug Freeze */ + CANx->MCR &= ~MCR_DBF; + } +} + + +/** + * @brief Enables or disabes the CAN Time TriggerOperation communication mode. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState : Mode new state , can be one of @ref FunctionalState. + * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last + * two data bytes of the 8-byte message: TIME[7:0] in data byte 6 + * and TIME[15:8] in data byte 7 + * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be + * sent over the CAN bus. + * @retval None + */ +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TTCM mode */ + CANx->MCR |= CAN_MCR_TTCM; + + /* Set TGT bits */ + CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT); + } + else + { + /* Disable the TTCM mode */ + CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM); + + /* Reset TGT bits */ + CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT); + } +} +/** + * @brief Initiates the transmission of a message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param TxMessage: pointer to a structure which contains CAN Id, CAN + * DLC and CAN data. + * @retval The number of the mailbox that is used for transmission + * or CAN_TxStatus_NoMailBox if there is no empty mailbox. + */ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) +{ + uint8_t transmit_mailbox = 0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); + assert_param(IS_CAN_RTR(TxMessage->RTR)); + assert_param(IS_CAN_DLC(TxMessage->DLC)); + + /* Select one empty transmit mailbox */ + if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmit_mailbox = 0; + } + else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmit_mailbox = 1; + } + else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) + { + transmit_mailbox = 2; + } + else + { + transmit_mailbox = CAN_TxStatus_NoMailBox; + } + + if (transmit_mailbox != CAN_TxStatus_NoMailBox) + { + /* Set up the Id */ + CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; + if (TxMessage->IDE == CAN_Id_Standard) + { + assert_param(IS_CAN_STDID(TxMessage->StdId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \ + TxMessage->RTR); + } + else + { + assert_param(IS_CAN_EXTID(TxMessage->ExtId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \ + TxMessage->IDE | \ + TxMessage->RTR); + } + + /* Set up the DLC */ + TxMessage->DLC &= (uint8_t)0x0000000F; + CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; + CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; + + /* Set up the data field */ + CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | + ((uint32_t)TxMessage->Data[2] << 16) | + ((uint32_t)TxMessage->Data[1] << 8) | + ((uint32_t)TxMessage->Data[0])); + CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | + ((uint32_t)TxMessage->Data[6] << 16) | + ((uint32_t)TxMessage->Data[5] << 8) | + ((uint32_t)TxMessage->Data[4])); + /* Request transmission */ + CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; + } + return transmit_mailbox; +} + +/** + * @brief Checks the transmission of a message. + * @param CANx: where x can be 1 or 2 to to select the + * CAN peripheral. + * @param TransmitMailbox: the number of the mailbox that is used for + * transmission. + * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed + * in an other case. + */ +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) +{ + uint32_t state = 0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); + + switch (TransmitMailbox) + { + case (CAN_TXMAILBOX_0): + state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0); + break; + case (CAN_TXMAILBOX_1): + state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1); + break; + case (CAN_TXMAILBOX_2): + state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2); + break; + default: + state = CAN_TxStatus_Failed; + break; + } + switch (state) + { + /* transmit pending */ + case (0x0): state = CAN_TxStatus_Pending; + break; + /* transmit failed */ + case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed; + break; + /* transmit succeeded */ + case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok; + break; + default: state = CAN_TxStatus_Failed; + break; + } + return (uint8_t) state; +} + +/** + * @brief Cancels a transmit request. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param Mailbox: Mailbox number. + * @retval None. + */ +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); + /* abort transmission */ + switch (Mailbox) + { + case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0; + break; + case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1; + break; + case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2; + break; + default: + break; + } +} + + +/** + * @brief Receives a message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @param RxMessage: pointer to a structure receive message which contains + * CAN Id, CAN DLC, CAN datas and FMI number. + * @retval None. + */ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Get the Id */ + RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; + if (RxMessage->IDE == CAN_Id_Standard) + { + RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); + } + else + { + RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); + } + + RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FMI */ + RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); + /* Get the data field */ + RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; + RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); + RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); + RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); + RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; + RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); + RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); + RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); + /* Release the FIFO */ + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Releases the specified FIFO. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. + * @retval None. + */ +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Returns the number of pending messages. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval NbMessage : which is the number of pending message. + */ +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + uint8_t message_pending=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + if (FIFONumber == CAN_FIFO0) + { + message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); + } + else if (FIFONumber == CAN_FIFO1) + { + message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); + } + else + { + message_pending = 0; + } + return message_pending; +} + + +/** + * @brief Select the CAN Operation mode. + * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one + * of @ref CAN_OperatingMode_TypeDef enumeration. + * @retval status of the requested mode which can be + * - CAN_ModeStatus_Failed CAN failed entering the specific mode + * - CAN_ModeStatus_Success CAN Succeed entering the specific mode + + */ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) +{ + uint8_t status = CAN_ModeStatus_Failed; + + /* Timeout for INAK or also for SLAK bits*/ + uint32_t timeout = INAK_TIMEOUT; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode)); + + if (CAN_OperatingMode == CAN_OperatingMode_Initialization) + { + /* Request initialisation */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Normal) + { + /* Request leave initialisation and sleep mode and enter Normal mode */ + CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ)); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != 0) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) + { + /* Request Sleep mode */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else + { + status = CAN_ModeStatus_Failed; + } + + return (uint8_t) status; +} + +/** + * @brief Enters the low power mode. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an + * other case. + */ +uint8_t CAN_Sleep(CAN_TypeDef* CANx) +{ + uint8_t sleepstatus = CAN_Sleep_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Request Sleep mode */ + CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Sleep mode status */ + if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) + { + /* Sleep mode not entered */ + sleepstatus = CAN_Sleep_Ok; + } + /* return sleep mode status */ + return (uint8_t)sleepstatus; +} + +/** + * @brief Wakes the CAN up. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an + * other case. + */ +uint8_t CAN_WakeUp(CAN_TypeDef* CANx) +{ + uint32_t wait_slak = SLAK_TIMEOUT; + uint8_t wakeupstatus = CAN_WakeUp_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Wake up request */ + CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP; + + /* Sleep mode status */ + while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) + { + wait_slak--; + } + if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) + { + /* wake up done : Sleep mode exited */ + wakeupstatus = CAN_WakeUp_Ok; + } + /* return wakeup status */ + return (uint8_t)wakeupstatus; +} + + +/** + * @brief Returns the CANx's last error code (LEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN_ErrorCode: specifies the Error code : + * - CAN_ERRORCODE_NoErr No Error + * - CAN_ERRORCODE_StuffErr Stuff Error + * - CAN_ERRORCODE_FormErr Form Error + * - CAN_ERRORCODE_ACKErr Acknowledgment Error + * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error + * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error + * - CAN_ERRORCODE_CRCErr CRC Error + * - CAN_ERRORCODE_SoftwareSetErr Software Set Error + */ + +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) +{ + uint8_t errorcode=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the error code*/ + errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC); + + /* Return the error code*/ + return errorcode; +} +/** + * @brief Returns the CANx Receive Error Counter (REC). + * @note In case of an error during reception, this counter is incremented + * by 1 or by 8 depending on the error condition as defined by the CAN + * standard. After every successful reception, the counter is + * decremented by 1 or reset to 120 if its value was higher than 128. + * When the counter value exceeds 127, the CAN controller enters the + * error passive state. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN Receive Error Counter. + */ +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the Receive Error Counter*/ + counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24); + + /* Return the Receive Error Counter*/ + return counter; +} + + +/** + * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval LSB of the 9-bit CAN Transmit Error Counter. + */ +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16); + + /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + return counter; +} + + +/** + * @brief Enables or disables the specified CANx interrupts. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. + * This parameter can be: + * - CAN_IT_TME, + * - CAN_IT_FMP0, + * - CAN_IT_FF0, + * - CAN_IT_FOV0, + * - CAN_IT_FMP1, + * - CAN_IT_FF1, + * - CAN_IT_FOV1, + * - CAN_IT_EWG, + * - CAN_IT_EPV, + * - CAN_IT_LEC, + * - CAN_IT_ERR, + * - CAN_IT_WKU or + * - CAN_IT_SLK. + * @param NewState: new state of the CAN interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CANx interrupt */ + CANx->IER |= CAN_IT; + } + else + { + /* Disable the selected CANx interrupt */ + CANx->IER &= ~CAN_IT; + } +} +/** + * @brief Checks whether the specified CAN flag is set or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to check. + * This parameter can be one of the following flags: + * - CAN_FLAG_EWG + * - CAN_FLAG_EPV + * - CAN_FLAG_BOF + * - CAN_FLAG_RQCP0 + * - CAN_FLAG_RQCP1 + * - CAN_FLAG_RQCP2 + * - CAN_FLAG_FMP1 + * - CAN_FLAG_FF1 + * - CAN_FLAG_FOV1 + * - CAN_FLAG_FMP0 + * - CAN_FLAG_FF0 + * - CAN_FLAG_FOV0 + * - CAN_FLAG_WKU + * - CAN_FLAG_SLAK + * - CAN_FLAG_LEC + * @retval The new state of CAN_FLAG (SET or RESET). + */ +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_GET_FLAG(CAN_FLAG)); + + + if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */ + { + /* Check the status of the specified CAN flag */ + if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + /* Return the CAN_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CAN's pending flags. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to clear. + * This parameter can be one of the following flags: + * - CAN_FLAG_RQCP0 + * - CAN_FLAG_RQCP1 + * - CAN_FLAG_RQCP2 + * - CAN_FLAG_FF1 + * - CAN_FLAG_FOV1 + * - CAN_FLAG_FF0 + * - CAN_FLAG_FOV0 + * - CAN_FLAG_WKU + * - CAN_FLAG_SLAK + * - CAN_FLAG_LEC + * @retval None. + */ +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + uint32_t flagtmp=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG)); + + if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */ + { + /* Clear the selected CAN flags */ + CANx->ESR = (uint32_t)RESET; + } + else /* MSR or TSR or RF0R or RF1R */ + { + flagtmp = CAN_FLAG & 0x000FFFFF; + + if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF0R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF1R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET) + { + /* Transmit Flags */ + CANx->TSR = (uint32_t)(flagtmp); + } + else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */ + { + /* Operating mode Flags */ + CANx->MSR = (uint32_t)(flagtmp); + } + } +} + +/** + * @brief Checks whether the specified CANx interrupt has occurred or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt source to check. + * This parameter can be one of the following flags: + * - CAN_IT_TME + * - CAN_IT_FMP0 + * - CAN_IT_FF0 + * - CAN_IT_FOV0 + * - CAN_IT_FMP1 + * - CAN_IT_FF1 + * - CAN_IT_FOV1 + * - CAN_IT_WKU + * - CAN_IT_SLK + * - CAN_IT_EWG + * - CAN_IT_EPV + * - CAN_IT_BOF + * - CAN_IT_LEC + * - CAN_IT_ERR + * @retval The current state of CAN_IT (SET or RESET). + */ +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + ITStatus itstatus = RESET; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + + /* check the enable interrupt bit */ + if((CANx->IER & CAN_IT) != RESET) + { + /* in case the Interrupt is enabled, .... */ + switch (CAN_IT) + { + case CAN_IT_TME: + /* Check CAN_TSR_RQCPx bits */ + itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2); + break; + case CAN_IT_FMP0: + /* Check CAN_RF0R_FMP0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0); + break; + case CAN_IT_FF0: + /* Check CAN_RF0R_FULL0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0); + break; + case CAN_IT_FOV0: + /* Check CAN_RF0R_FOVR0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0); + break; + case CAN_IT_FMP1: + /* Check CAN_RF1R_FMP1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1); + break; + case CAN_IT_FF1: + /* Check CAN_RF1R_FULL1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1); + break; + case CAN_IT_FOV1: + /* Check CAN_RF1R_FOVR1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1); + break; + case CAN_IT_WKU: + /* Check CAN_MSR_WKUI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI); + break; + case CAN_IT_SLK: + /* Check CAN_MSR_SLAKI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI); + break; + case CAN_IT_EWG: + /* Check CAN_ESR_EWGF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF); + break; + case CAN_IT_EPV: + /* Check CAN_ESR_EPVF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF); + break; + case CAN_IT_BOF: + /* Check CAN_ESR_BOFF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF); + break; + case CAN_IT_LEC: + /* Check CAN_ESR_LEC bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC); + break; + case CAN_IT_ERR: + /* Check CAN_MSR_ERRI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); + break; + default : + /* in case of error, return RESET */ + itstatus = RESET; + break; + } + } + else + { + /* in case the Interrupt is not enabled, return RESET */ + itstatus = RESET; + } + + /* Return the CAN_IT status */ + return itstatus; +} + +/** + * @brief Clears the CANx's interrupt pending bits. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the interrupt pending bit to clear. + * - CAN_IT_TME + * - CAN_IT_FF0 + * - CAN_IT_FOV0 + * - CAN_IT_FF1 + * - CAN_IT_FOV1 + * - CAN_IT_WKU + * - CAN_IT_SLK + * - CAN_IT_EWG + * - CAN_IT_EPV + * - CAN_IT_BOF + * - CAN_IT_LEC + * - CAN_IT_ERR + * @retval None. + */ +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_IT(CAN_IT)); + + switch (CAN_IT) + { + case CAN_IT_TME: + /* Clear CAN_TSR_RQCPx (rc_w1)*/ + CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2; + break; + case CAN_IT_FF0: + /* Clear CAN_RF0R_FULL0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FULL0; + break; + case CAN_IT_FOV0: + /* Clear CAN_RF0R_FOVR0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FOVR0; + break; + case CAN_IT_FF1: + /* Clear CAN_RF1R_FULL1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FULL1; + break; + case CAN_IT_FOV1: + /* Clear CAN_RF1R_FOVR1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FOVR1; + break; + case CAN_IT_WKU: + /* Clear CAN_MSR_WKUI (rc_w1)*/ + CANx->MSR = CAN_MSR_WKUI; + break; + case CAN_IT_SLK: + /* Clear CAN_MSR_SLAKI (rc_w1)*/ + CANx->MSR = CAN_MSR_SLAKI; + break; + case CAN_IT_EWG: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_EPV: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_BOF: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_LEC: + /* Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + break; + case CAN_IT_ERR: + /*Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending + of the CAN Bus status*/ + break; + default : + break; + } +} + +/** + * @brief Checks whether the CAN interrupt has occurred or not. + * @param CAN_Reg: specifies the CAN interrupt register to check. + * @param It_Bit: specifies the interrupt source bit to check. + * @retval The new state of the CAN Interrupt (SET or RESET). + */ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) +{ + ITStatus pendingbitstatus = RESET; + + if ((CAN_Reg & It_Bit) != (uint32_t)RESET) + { + /* CAN_IT is set */ + pendingbitstatus = SET; + } + else + { + /* CAN_IT is reset */ + pendingbitstatus = RESET; + } + return pendingbitstatus; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c new file mode 100644 index 00000000..08b501a0 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c @@ -0,0 +1,433 @@ +/** + ****************************************************************************** + * @file stm32f10x_cec.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CEC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_cec.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CEC + * @brief CEC driver modules + * @{ + */ + +/** @defgroup CEC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Defines + * @{ + */ + +/* ------------ CEC registers bit address in the alias region ----------- */ +#define CEC_OFFSET (CEC_BASE - PERIPH_BASE) + +/* --- CFGR Register ---*/ + +/* Alias word address of PE bit */ +#define CFGR_OFFSET (CEC_OFFSET + 0x00) +#define PE_BitNumber 0x00 +#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4)) + +/* Alias word address of IE bit */ +#define IE_BitNumber 0x01 +#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TSOM bit */ +#define CSR_OFFSET (CEC_OFFSET + 0x10) +#define TSOM_BitNumber 0x00 +#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4)) + +/* Alias word address of TEOM bit */ +#define TEOM_BitNumber 0x01 +#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4)) + +#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the CEC peripheral registers to their default reset + * values. + * @param None + * @retval None + */ +void CEC_DeInit(void) +{ + /* Enable CEC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE); + /* Release CEC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE); +} + + +/** + * @brief Initializes the CEC peripheral according to the specified + * parameters in the CEC_InitStruct. + * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that + * contains the configuration information for the specified + * CEC peripheral. + * @retval None + */ +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode)); + assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode)); + + /*---------------------------- CEC CFGR Configuration -----------------*/ + /* Get the CEC CFGR value */ + tmpreg = CEC->CFGR; + + /* Clear BTEM and BPEM bits */ + tmpreg &= CFGR_CLEAR_Mask; + + /* Configure CEC: Bit Timing Error and Bit Period Error */ + tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode); + + /* Write to CEC CFGR register*/ + CEC->CFGR = tmpreg; + +} + +/** + * @brief Enables or disables the specified CEC peripheral. + * @param NewState: new state of the CEC peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState; + + if(NewState == DISABLE) + { + /* Wait until the PE bit is cleared by hardware (Idle Line detected) */ + while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET) + { + } + } +} + +/** + * @brief Enables or disables the CEC interrupt. + * @param NewState: new state of the CEC interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState; +} + +/** + * @brief Defines the Own Address of the CEC device. + * @param CEC_OwnAddress: The CEC own address + * @retval None + */ +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress) +{ + /* Check the parameters */ + assert_param(IS_CEC_ADDRESS(CEC_OwnAddress)); + + /* Set the CEC own address */ + CEC->OAR = CEC_OwnAddress; +} + +/** + * @brief Sets the CEC prescaler value. + * @param CEC_Prescaler: CEC prescaler new value + * @retval None + */ +void CEC_SetPrescaler(uint16_t CEC_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_CEC_PRESCALER(CEC_Prescaler)); + + /* Set the Prescaler value*/ + CEC->PRES = CEC_Prescaler; +} + +/** + * @brief Transmits single data through the CEC peripheral. + * @param Data: the data to transmit. + * @retval None + */ +void CEC_SendDataByte(uint8_t Data) +{ + /* Transmit Data */ + CEC->TXD = Data ; +} + + +/** + * @brief Returns the most recent received data by the CEC peripheral. + * @param None + * @retval The received data. + */ +uint8_t CEC_ReceiveDataByte(void) +{ + /* Receive Data */ + return (uint8_t)(CEC->RXD); +} + +/** + * @brief Starts a new message. + * @param None + * @retval None + */ +void CEC_StartOfMessage(void) +{ + /* Starts of new message */ + *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1; +} + +/** + * @brief Transmits message with or without an EOM bit. + * @param NewState: new state of the CEC Tx End Of Message. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_EndOfMessageCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* The data byte will be transmitted with or without an EOM bit*/ + *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState; +} + +/** + * @brief Gets the CEC flag status + * @param CEC_FLAG: specifies the CEC flag to check. + * This parameter can be one of the following values: + * @arg CEC_FLAG_BTE: Bit Timing Error + * @arg CEC_FLAG_BPE: Bit Period Error + * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error + * @arg CEC_FLAG_SBE: Start Bit Error + * @arg CEC_FLAG_ACKE: Block Acknowledge Error + * @arg CEC_FLAG_LINE: Line Error + * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error + * @arg CEC_FLAG_TEOM: Tx End Of Message + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished + * @arg CEC_FLAG_RSOM: Rx Start Of Message + * @arg CEC_FLAG_REOM: Rx End Of Message + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished + * @retval The new state of CEC_FLAG (SET or RESET) + */ +FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t cecreg = 0, cecbase = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_FLAG(CEC_FLAG)); + + /* Get the CEC peripheral base address */ + cecbase = (uint32_t)(CEC_BASE); + + /* Read flag register index */ + cecreg = CEC_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + CEC_FLAG &= FLAG_Mask; + + if(cecreg != 0) + { + /* Flag in CEC ESR Register */ + CEC_FLAG = (uint32_t)(CEC_FLAG >> 16); + + /* Get the CEC ESR register address */ + cecbase += 0xC; + } + else + { + /* Get the CEC CSR register address */ + cecbase += 0x10; + } + + if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET) + { + /* CEC_FLAG is set */ + bitstatus = SET; + } + else + { + /* CEC_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the CEC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's pending flags. + * @param CEC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished + * @arg CEC_FLAG_RSOM: Rx Start Of Message + * @arg CEC_FLAG_REOM: Rx End Of Message + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished + * @retval None + */ +void CEC_ClearFlag(uint32_t CEC_FLAG) +{ + uint32_t tmp = 0x0; + + /* Check the parameters */ + assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG)); + + tmp = CEC->CSR & 0x2; + + /* Clear the selected CEC flags */ + CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp); +} + +/** + * @brief Checks whether the specified CEC interrupt has occurred or not. + * @param CEC_IT: specifies the CEC interrupt source to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TERR: Tx Error + * @arg CEC_IT_TBTF: Tx Block Transfer Finished + * @arg CEC_IT_RERR: Rx Error + * @arg CEC_IT_RBTF: Rx Block Transfer Finished + * @retval The new state of CEC_IT (SET or RESET). + */ +ITStatus CEC_GetITStatus(uint8_t CEC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + /* Get the CEC IT enable bit status */ + enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ; + + /* Check the status of the specified CEC interrupt */ + if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus) + { + /* CEC_IT is set */ + bitstatus = SET; + } + else + { + /* CEC_IT is reset */ + bitstatus = RESET; + } + /* Return the CEC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's interrupt pending bits. + * @param CEC_IT: specifies the CEC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg CEC_IT_TERR: Tx Error + * @arg CEC_IT_TBTF: Tx Block Transfer Finished + * @arg CEC_IT_RERR: Rx Error + * @arg CEC_IT_RBTF: Rx Block Transfer Finished + * @retval None + */ +void CEC_ClearITPendingBit(uint16_t CEC_IT) +{ + uint32_t tmp = 0x0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + tmp = CEC->CSR & 0x2; + + /* Clear the selected CEC interrupt pending bits */ + CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c new file mode 100644 index 00000000..ef0c047d --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c @@ -0,0 +1,160 @@ +/** + ****************************************************************************** + * @file stm32f10x_crc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CRC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_crc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC driver modules + * @{ + */ + +/** @defgroup CRC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Resets the CRC Data register (DR). + * @param None + * @retval None + */ +void CRC_ResetDR(void) +{ + /* Reset CRC generator */ + CRC->CR = CRC_CR_RESET; +} + +/** + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * @param Data: data word(32-bit) to compute its CRC + * @retval 32-bit CRC + */ +uint32_t CRC_CalcCRC(uint32_t Data) +{ + CRC->DR = Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++) + { + CRC->DR = pBuffer[index]; + } + return (CRC->DR); +} + +/** + * @brief Returns the current CRC value. + * @param None + * @retval 32-bit CRC + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DR); +} + +/** + * @brief Stores a 8-bit data in the Independent Data(ID) register. + * @param IDValue: 8-bit value to be stored in the ID register + * @retval None + */ +void CRC_SetIDRegister(uint8_t IDValue) +{ + CRC->IDR = IDValue; +} + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register + * @param None + * @retval 8-bit value of the ID register + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDR); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c new file mode 100644 index 00000000..025b8e28 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c @@ -0,0 +1,571 @@ +/** + ****************************************************************************** + * @file stm32f10x_dac.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DAC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dac.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DAC + * @brief DAC driver modules + * @{ + */ + +/** @defgroup DAC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Defines + * @{ + */ + +/* CR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0x00000FFE) + +/* DAC Dual Channels SWTRIG masks */ +#define DUAL_SWTRIG_SET ((uint32_t)0x00000003) +#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC) + +/* DHR registers offsets */ +#define DHR12R1_OFFSET ((uint32_t)0x00000008) +#define DHR12R2_OFFSET ((uint32_t)0x00000014) +#define DHR12RD_OFFSET ((uint32_t)0x00000020) + +/* DOR register offset */ +#define DOR_OFFSET ((uint32_t)0x0000002C) +/** + * @} + */ + +/** @defgroup DAC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the DAC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void DAC_DeInit(void) +{ + /* Enable DAC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); + /* Release DAC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); +} + +/** + * @brief Initializes the DAC peripheral according to the specified + * parameters in the DAC_InitStruct. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that + * contains the configuration information for the specified DAC channel. + * @retval None + */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); + assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); +/*---------------------------- DAC CR Configuration --------------------------*/ + /* Get the DAC CR value */ + tmpreg1 = DAC->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel); + /* Configure for the selected DAC channel: buffer output, trigger, wave generation, + mask/amplitude for wave generation */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set WAVEx bits according to DAC_WaveGeneration value */ + /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << DAC_Channel; + /* Write to DAC CR */ + DAC->CR = tmpreg1; +} + +/** + * @brief Fills each DAC_InitStruct member with its default value. + * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) +{ +/*--------------- Reset DAC init structure parameters values -----------------*/ + /* Initialize the DAC_Trigger member */ + DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; + /* Initialize the DAC_WaveGeneration member */ + DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; + /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; + /* Initialize the DAC_OutputBuffer member */ + DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; +} + +/** + * @brief Enables or disables the specified DAC channel. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the DAC channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DAC channel */ + DAC->CR |= (DAC_CR_EN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel */ + DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel); + } +} +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** + * @brief Enables or disables the specified DAC interrupts. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @param NewState: new state of the specified DAC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_DAC_IT(DAC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC interrupts */ + DAC->CR |= (DAC_IT << DAC_Channel); + } + else + { + /* Disable the selected DAC interrupts */ + DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel)); + } +} +#endif + +/** + * @brief Enables or disables the specified DAC channel DMA request. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DAC channel DMA request */ + DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel DMA request */ + DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel); + } +} + +/** + * @brief Enables or disables the selected DAC channel software trigger. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel software trigger. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable software trigger for the selected DAC channel */ + DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4); + } + else + { + /* Disable software trigger for the selected DAC channel */ + DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4)); + } +} + +/** + * @brief Enables or disables simultaneously the two DAC channels software + * triggers. + * @param NewState: new state of the DAC channels software triggers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable software trigger for both DAC channels */ + DAC->SWTRIGR |= DUAL_SWTRIG_SET ; + } + else + { + /* Disable software trigger for both DAC channels */ + DAC->SWTRIGR &= DUAL_SWTRIG_RESET; + } +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_Wave: Specifies the wave type to enable or disable. + * This parameter can be one of the following values: + * @arg DAC_Wave_Noise: noise wave generation + * @arg DAC_Wave_Triangle: triangle wave generation + * @param NewState: new state of the selected DAC channel wave generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_WAVE(DAC_Wave)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected wave generation for the selected DAC channel */ + DAC->CR |= DAC_Wave << DAC_Channel; + } + else + { + /* Disable the selected wave generation for the selected DAC channel */ + DAC->CR &= ~(DAC_Wave << DAC_Channel); + } +} + +/** + * @brief Set the specified data holding register value for DAC channel1. + * @param DAC_Align: Specifies the data alignment for DAC channel1. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data : Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R1_OFFSET + DAC_Align; + + /* Set the DAC channel1 selected data holding register */ + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Set the specified data holding register value for DAC channel2. + * @param DAC_Align: Specifies the data alignment for DAC channel2. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data : Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R2_OFFSET + DAC_Align; + + /* Set the DAC channel2 selected data holding register */ + *(__IO uint32_t *)tmp = Data; +} + +/** + * @brief Set the specified data holding register value for dual channel + * DAC. + * @param DAC_Align: Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data2: Data for DAC Channel2 to be loaded in the selected data + * holding register. + * @param Data1: Data for DAC Channel1 to be loaded in the selected data + * holding register. + * @retval None + */ +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) +{ + uint32_t data = 0, tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (DAC_Align == DAC_Align_8b_R) + { + data = ((uint32_t)Data2 << 8) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16) | Data1; + } + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12RD_OFFSET + DAC_Align; + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; +} + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + + tmp = (uint32_t) DAC_BASE ; + tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2); + + /* Returns the DAC channel data output register value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** + * @brief Checks whether the specified DAC flag is set or not. + * @param DAC_Channel: thee selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to check. + * This parameter can be only of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval The new state of DAC_FLAG (SET or RESET). + */ +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Check the status of the specified DAC flag */ + if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET) + { + /* DAC_FLAG is set */ + bitstatus = SET; + } + else + { + /* DAC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the DAC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channelx's pending flags. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to clear. + * This parameter can be of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval None + */ +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Clear the selected DAC flags */ + DAC->SR = (DAC_FLAG << DAC_Channel); +} + +/** + * @brief Checks whether the specified DAC interrupt has occurred or not. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt source to check. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval The new state of DAC_IT (SET or RESET). + */ +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Get the DAC_IT enable bit status */ + enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ; + + /* Check the status of the specified DAC interrupt */ + if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus) + { + /* DAC_IT is set */ + bitstatus = SET; + } + else + { + /* DAC_IT is reset */ + bitstatus = RESET; + } + /* Return the DAC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channelx's interrupt pending bits. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt pending bit to clear. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval None + */ +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Clear the selected DAC interrupt pending bits */ + DAC->SR = (DAC_IT << DAC_Channel); +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c new file mode 100644 index 00000000..d34307b0 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c @@ -0,0 +1,162 @@ +/** + ****************************************************************************** + * @file stm32f10x_dbgmcu.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DBGMCU firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dbgmcu.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DBGMCU + * @brief DBGMCU driver modules + * @{ + */ + +/** @defgroup DBGMCU_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Defines + * @{ + */ + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Functions + * @{ + */ + +/** + * @brief Returns the device revision identifier. + * @param None + * @retval Device revision identifier + */ +uint32_t DBGMCU_GetREVID(void) +{ + return(DBGMCU->IDCODE >> 16); +} + +/** + * @brief Returns the device identifier. + * @param None + * @retval Device identifier + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); +} + +/** + * @brief Configures the specified peripheral and low power mode behavior + * when the MCU under Debug mode. + * @param DBGMCU_Periph: specifies the peripheral and low power mode. + * This parameter can be any combination of the following values: + * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode + * @arg DBGMCU_STOP: Keep debugger connection during STOP mode + * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode + * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted + * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted + * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted + * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted + * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted + * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted + * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted + * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted + * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted + * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted + * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted + * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted + * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted + * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted + * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted + * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted + * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted + * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted + * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted + * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted + * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted + * @param NewState: new state of the specified peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->CR |= DBGMCU_Periph; + } + else + { + DBGMCU->CR &= ~DBGMCU_Periph; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c new file mode 100644 index 00000000..0c86f901 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c @@ -0,0 +1,714 @@ +/** + ****************************************************************************** + * @file stm32f10x_dma.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DMA firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dma.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DMA + * @brief DMA driver modules + * @{ + */ + +/** @defgroup DMA_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup DMA_Private_Defines + * @{ + */ + + +/* DMA1 Channelx interrupt pending bit masks */ +#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) +#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6)) +#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7)) + +/* DMA2 Channelx interrupt pending bit masks */ +#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) + +/* DMA2 FLAG mask */ +#define FLAG_Mask ((uint32_t)0x10000000) + +/* DMA registers Masks */ +#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F) + +/** + * @} + */ + +/** @defgroup DMA_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the DMAy Channelx registers to their default reset + * values. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @retval None + */ +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); + + /* Reset DMAy Channelx control register */ + DMAy_Channelx->CCR = 0; + + /* Reset DMAy Channelx remaining bytes register */ + DMAy_Channelx->CNDTR = 0; + + /* Reset DMAy Channelx peripheral address register */ + DMAy_Channelx->CPAR = 0; + + /* Reset DMAy Channelx memory address register */ + DMAy_Channelx->CMAR = 0; + + if (DMAy_Channelx == DMA1_Channel1) + { + /* Reset interrupt pending bits for DMA1 Channel1 */ + DMA1->IFCR |= DMA1_Channel1_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel2) + { + /* Reset interrupt pending bits for DMA1 Channel2 */ + DMA1->IFCR |= DMA1_Channel2_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel3) + { + /* Reset interrupt pending bits for DMA1 Channel3 */ + DMA1->IFCR |= DMA1_Channel3_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel4) + { + /* Reset interrupt pending bits for DMA1 Channel4 */ + DMA1->IFCR |= DMA1_Channel4_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel5) + { + /* Reset interrupt pending bits for DMA1 Channel5 */ + DMA1->IFCR |= DMA1_Channel5_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel6) + { + /* Reset interrupt pending bits for DMA1 Channel6 */ + DMA1->IFCR |= DMA1_Channel6_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel7) + { + /* Reset interrupt pending bits for DMA1 Channel7 */ + DMA1->IFCR |= DMA1_Channel7_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel1) + { + /* Reset interrupt pending bits for DMA2 Channel1 */ + DMA2->IFCR |= DMA2_Channel1_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel2) + { + /* Reset interrupt pending bits for DMA2 Channel2 */ + DMA2->IFCR |= DMA2_Channel2_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel3) + { + /* Reset interrupt pending bits for DMA2 Channel3 */ + DMA2->IFCR |= DMA2_Channel3_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel4) + { + /* Reset interrupt pending bits for DMA2 Channel4 */ + DMA2->IFCR |= DMA2_Channel4_IT_Mask; + } + else + { + if (DMAy_Channelx == DMA2_Channel5) + { + /* Reset interrupt pending bits for DMA2 Channel5 */ + DMA2->IFCR |= DMA2_Channel5_IT_Mask; + } + } +} + +/** + * @brief Initializes the DMAy Channelx according to the specified + * parameters in the DMA_InitStruct. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that + * contains the configuration information for the specified DMA Channel. + * @retval None + */ +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); + assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); + assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); + assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); + assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); + +/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ + /* Get the DMAy_Channelx CCR value */ + tmpreg = DMAy_Channelx->CCR; + /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmpreg &= CCR_CLEAR_Mask; + /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ + /* Set DIR bit according to DMA_DIR value */ + /* Set CIRC bit according to DMA_Mode value */ + /* Set PINC bit according to DMA_PeripheralInc value */ + /* Set MINC bit according to DMA_MemoryInc value */ + /* Set PSIZE bits according to DMA_PeripheralDataSize value */ + /* Set MSIZE bits according to DMA_MemoryDataSize value */ + /* Set PL bits according to DMA_Priority value */ + /* Set the MEM2MEM bit according to DMA_M2M value */ + tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | + DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | + DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | + DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; + + /* Write to DMAy Channelx CCR */ + DMAy_Channelx->CCR = tmpreg; + +/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; + +/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ + /* Write to DMAy Channelx CPAR */ + DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; + +/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ + /* Write to DMAy Channelx CMAR */ + DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; +} + +/** + * @brief Fills each DMA_InitStruct member with its default value. + * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) +{ +/*-------------- Reset DMA init structure parameters values ------------------*/ + /* Initialize the DMA_PeripheralBaseAddr member */ + DMA_InitStruct->DMA_PeripheralBaseAddr = 0; + /* Initialize the DMA_MemoryBaseAddr member */ + DMA_InitStruct->DMA_MemoryBaseAddr = 0; + /* Initialize the DMA_DIR member */ + DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; + /* Initialize the DMA_BufferSize member */ + DMA_InitStruct->DMA_BufferSize = 0; + /* Initialize the DMA_PeripheralInc member */ + DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; + /* Initialize the DMA_MemoryInc member */ + DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; + /* Initialize the DMA_PeripheralDataSize member */ + DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + /* Initialize the DMA_MemoryDataSize member */ + DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + /* Initialize the DMA_Mode member */ + DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; + /* Initialize the DMA_Priority member */ + DMA_InitStruct->DMA_Priority = DMA_Priority_Low; + /* Initialize the DMA_M2M member */ + DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; +} + +/** + * @brief Enables or disables the specified DMAy Channelx. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param NewState: new state of the DMAy Channelx. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DMAy Channelx */ + DMAy_Channelx->CCR |= DMA_CCR1_EN; + } + else + { + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); + } +} + +/** + * @brief Enables or disables the specified DMAy Channelx interrupts. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DMA_IT: specifies the DMA interrupts sources to be enabled + * or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @param NewState: new state of the specified DMA interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_CONFIG_IT(DMA_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DMA interrupts */ + DMAy_Channelx->CCR |= DMA_IT; + } + else + { + /* Disable the selected DMA interrupts */ + DMAy_Channelx->CCR &= ~DMA_IT; + } +} + +/** + * @brief Sets the number of data units in the current DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DataNumber: The number of data units in the current DMAy Channelx + * transfer. + * @note This function can only be used when the DMAy_Channelx is disabled. + * @retval None. + */ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + +/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DataNumber; +} + +/** + * @brief Returns the number of remaining data units in the current + * DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @retval The number of remaining data units in the current DMAy Channelx + * transfer. + */ +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + /* Return the number of remaining data units for DMAy Channelx */ + return ((uint16_t)(DMAy_Channelx->CNDTR)); +} + +/** + * @brief Checks whether the specified DMAy Channelx flag is set or not. + * @param DMAy_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. + * @retval The new state of DMAy_FLAG (SET or RESET). + */ +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR ; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR ; + } + + /* Check the status of the specified DMAy flag */ + if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET) + { + /* DMAy_FLAG is set */ + bitstatus = SET; + } + else + { + /* DMAy_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the DMAy_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's pending flags. + * @param DMAy_FLAG: specifies the flag to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. + * @retval None + */ +void DMA_ClearFlag(uint32_t DMAy_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy flags */ + DMA2->IFCR = DMAy_FLAG; + } + else + { + /* Clear the selected DMAy flags */ + DMA1->IFCR = DMAy_FLAG; + } +} + +/** + * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not. + * @param DMAy_IT: specifies the DMAy interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. + * @retval The new state of DMAy_IT (SET or RESET). + */ +ITStatus DMA_GetITStatus(uint32_t DMAy_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_IT(DMAy_IT)); + + /* Calculate the used DMA */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR; + } + + /* Check the status of the specified DMAy interrupt */ + if ((tmpreg & DMAy_IT) != (uint32_t)RESET) + { + /* DMAy_IT is set */ + bitstatus = SET; + } + else + { + /* DMAy_IT is reset */ + bitstatus = RESET; + } + /* Return the DMA_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's interrupt pending bits. + * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. + * @retval None + */ +void DMA_ClearITPendingBit(uint32_t DMAy_IT) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_IT(DMAy_IT)); + + /* Calculate the used DMAy */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy interrupt pending bits */ + DMA2->IFCR = DMAy_IT; + } + else + { + /* Clear the selected DMAy interrupt pending bits */ + DMA1->IFCR = DMAy_IT; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c new file mode 100644 index 00000000..ab734627 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c @@ -0,0 +1,269 @@ +/** + ****************************************************************************** + * @file stm32f10x_exti.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the EXTI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_exti.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup EXTI + * @brief EXTI driver modules + * @{ + */ + +/** @defgroup EXTI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Defines + * @{ + */ + +#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the EXTI peripheral registers to their default reset values. + * @param None + * @retval None + */ +void EXTI_DeInit(void) +{ + EXTI->IMR = 0x00000000; + EXTI->EMR = 0x00000000; + EXTI->RTSR = 0x00000000; + EXTI->FTSR = 0x00000000; + EXTI->PR = 0x000FFFFF; +} + +/** + * @brief Initializes the EXTI peripheral according to the specified + * parameters in the EXTI_InitStruct. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure + * that contains the configuration information for the EXTI peripheral. + * @retval None + */ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); + assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); + assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); + + tmp = (uint32_t)EXTI_BASE; + + if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; + + tmp += EXTI_InitStruct->EXTI_Mode; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; + + /* Select the trigger for the selected external interrupts */ + if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) + { + /* Rising Falling edge */ + EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; + EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; + } + else + { + tmp = (uint32_t)EXTI_BASE; + tmp += EXTI_InitStruct->EXTI_Trigger; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + } + } + else + { + tmp += EXTI_InitStruct->EXTI_Mode; + + /* Disable the selected external lines */ + *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; + } +} + +/** + * @brief Fills each EXTI_InitStruct member with its reset value. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) +{ + EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; + EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStruct->EXTI_LineCmd = DISABLE; +} + +/** + * @brief Generates a Software interrupt. + * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->SWIER |= EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param EXTI_Line: specifies the EXTI line flag to check. + * This parameter can be: + * @arg EXTI_Linex: External interrupt line x where x(0..19) + * @retval The new state of EXTI_Line (SET or RESET). + */ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending flags. + * @param EXTI_Line: specifies the EXTI lines flags to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param EXTI_Line: specifies the EXTI line to check. + * This parameter can be: + * @arg EXTI_Linex: External interrupt line x where x(0..19) + * @retval The new state of EXTI_Line (SET or RESET). + */ +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + enablestatus = EXTI->IMR & EXTI_Line; + if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending bits. + * @param EXTI_Line: specifies the EXTI lines to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_ClearITPendingBit(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c new file mode 100644 index 00000000..f6c7bf17 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c @@ -0,0 +1,1684 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the FLASH firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_flash.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +/** @defgroup FLASH_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Defines + * @{ + */ + +/* Flash Access Control Register bits */ +#define ACR_LATENCY_Mask ((uint32_t)0x00000038) +#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) +#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) + +/* Flash Access Control Register bits */ +#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) + +/* Flash Control Register bits */ +#define CR_PG_Set ((uint32_t)0x00000001) +#define CR_PG_Reset ((uint32_t)0x00001FFE) +#define CR_PER_Set ((uint32_t)0x00000002) +#define CR_PER_Reset ((uint32_t)0x00001FFD) +#define CR_MER_Set ((uint32_t)0x00000004) +#define CR_MER_Reset ((uint32_t)0x00001FFB) +#define CR_OPTPG_Set ((uint32_t)0x00000010) +#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) +#define CR_OPTER_Set ((uint32_t)0x00000020) +#define CR_OPTER_Reset ((uint32_t)0x00001FDF) +#define CR_STRT_Set ((uint32_t)0x00000040) +#define CR_LOCK_Set ((uint32_t)0x00000080) + +/* FLASH Mask */ +#define RDPRT_Mask ((uint32_t)0x00000002) +#define WRP0_Mask ((uint32_t)0x000000FF) +#define WRP1_Mask ((uint32_t)0x0000FF00) +#define WRP2_Mask ((uint32_t)0x00FF0000) +#define WRP3_Mask ((uint32_t)0xFF000000) +#define OB_USER_BFB2 ((uint16_t)0x0008) + +/* FLASH Keys */ +#define RDP_Key ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) + +/* FLASH BANK address */ +#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x000B0000) +#define ProgramTimeout ((uint32_t)0x00002000) +/** + * @} + */ + +/** @defgroup FLASH_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Functions + * @{ + */ + +/** +@code + + This driver provides functions to configure and program the Flash memory of all STM32F10x devices, + including the latest STM32F10x_XL density devices. + + STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability: + - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each) + - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each) + While other STM32F10x devices features only one bank with memory up to 512 Kbytes. + + In version V3.3.0, some functions were updated and new ones were added to support + STM32F10x_XL devices. Thus some functions manages all devices, while other are + dedicated for XL devices only. + + The table below presents the list of available functions depending on the used STM32F10x devices. + + *************************************************** + * Legacy functions used for all STM32F10x devices * + *************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_SetLatency | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_HalfCycleAccessCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_PrefetchBufferCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. | + | | | | - For other devices: unlock Bank1 and it is equivalent | + | | | | to FLASH_UnlockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. | + | | | | - For other devices: lock Bank1 and it is equivalent | + | | | | to FLASH_LockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 | + | | | | - For other devices: erase a page in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 | + | | | | - For other devices: erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseOptionBytes | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramOptionByteData | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EnableWriteProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ReadOutProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_UserOptionByteConfig | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetUserOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts| + | | | | - For other devices: enable Bank1's interrupts | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status| + | | | | - For other devices: return Bank1's flag status | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag | + | | | | - For other devices: clear Bank1's flag | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) | + | | | | equivalent to FLASH_GetBank1Status function | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) | + | | | | equivalent to: FLASH_WaitForLastBank1Operation function | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ************************************************************************************************************************ + * New functions used for all STM32F10x devices to manage Bank1: * + * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 * + * - For other devices, these functions are optional (covered by functions listed above) * + ************************************************************************************************************************ + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ***************************************************************************** + * New Functions used only with STM32F10x_XL density devices to manage Bank2 * + ***************************************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank2 | Yes | No | - Lock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 | + +----------------------------------------------------------------------------------------------------------------------------------+ +@endcode +*/ + + +/** + * @brief Sets the code latency value. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Latency: specifies the FLASH Latency value. + * This parameter can be one of the following values: + * @arg FLASH_Latency_0: FLASH Zero Latency cycle + * @arg FLASH_Latency_1: FLASH One Latency cycle + * @arg FLASH_Latency_2: FLASH Two Latency cycles + * @retval None + */ +void FLASH_SetLatency(uint32_t FLASH_Latency) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_LATENCY(FLASH_Latency)); + + /* Read the ACR register */ + tmpreg = FLASH->ACR; + + /* Sets the Latency value */ + tmpreg &= ACR_LATENCY_Mask; + tmpreg |= FLASH_Latency; + + /* Write the ACR register */ + FLASH->ACR = tmpreg; +} + +/** + * @brief Enables or disables the Half cycle flash access. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode. + * This parameter can be one of the following values: + * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable + * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable + * @retval None + */ +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess) +{ + /* Check the parameters */ + assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); + + /* Enable or disable the Half cycle access */ + FLASH->ACR &= ACR_HLFCYA_Mask; + FLASH->ACR |= FLASH_HalfCycleAccess; +} + +/** + * @brief Enables or disables the Prefetch Buffer. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status. + * This parameter can be one of the following values: + * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable + * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable + * @retval None + */ +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); + + /* Enable or disable the Prefetch Buffer */ + FLASH->ACR &= ACR_PRFTBE_Mask; + FLASH->ACR |= FLASH_PrefetchBuffer; +} + +/** + * @brief Unlocks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2. + * - For all other devices it unlocks Bank1 and it is equivalent + * to FLASH_UnlockBank1 function.. + * @param None + * @retval None + */ +void FLASH_Unlock(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + +#ifdef STM32F10X_XL + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; +#endif /* STM32F10X_XL */ +} +/** + * @brief Unlocks the FLASH Bank1 Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1. + * - For all other devices it unlocks Bank1 and it is + * equivalent to FLASH_Unlock function. + * @param None + * @retval None + */ +void FLASH_UnlockBank1(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +#ifdef STM32F10X_XL +/** + * @brief Unlocks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_UnlockBank2(void) +{ + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; + +} +#endif /* STM32F10X_XL */ + +/** + * @brief Locks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1 and Bank2. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_LockBank1 function. + * @param None + * @retval None + */ +void FLASH_Lock(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; + +#ifdef STM32F10X_XL + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Locks the FLASH Bank1 Program Erase Controller. + * @note this function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_Lock function. + * @param None + * @retval None + */ +void FLASH_LockBank1(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; +} + +#ifdef STM32F10X_XL +/** + * @brief Locks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_LockBank2(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases a specified FLASH page. + * @note This function can be used for all STM32F10x devices. + * @param Page_Address: The page address to be erased. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Page_Address)); + +#ifdef STM32F10X_XL + if(Page_Address < FLASH_BANK1_END_ADDRESS) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR2|= CR_PER_Set; + FLASH->AR2 = Page_Address; + FLASH->CR2|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR2 &= CR_PER_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all FLASH pages. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllPages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all Bank1 FLASH pages. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function erases all Bank1 pages. + * - For all other devices it erases all Bank1 pages and it is equivalent + * to FLASH_EraseAllPages function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank1Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Erases all Bank2 FLASH pages. + * @note This function can be used only for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank2Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseOptionBytes(void) +{ + uint16_t rdptmp = RDP_Key; + + FLASH_Status status = FLASH_COMPLETE; + + /* Get the actual read protection Option Byte value */ + if(FLASH_GetReadOutProtectionStatus() != RESET) + { + rdptmp = 0x00; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* if the previous operation is completed, proceed to erase the option bytes */ + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + /* Restore the last read protection Option Byte value */ + OB->RDP = (uint16_t)rdptmp; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if (status != FLASH_TIMEOUT) + { + /* Disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + } + /* Return the erase status */ + return status; +} + +/** + * @brief Programs a word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + if(Address < FLASH_BANK1_END_ADDRESS - 2) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + } + else if(Address == (FLASH_BANK1_END_ADDRESS - 1)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + FLASH->CR2 |= CR_PG_Set; + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(Address < FLASH_BANK1_END_ADDRESS) + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + else + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + /* Enables the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Write protects the desired pages + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Pages: specifies the address of the pages to be write protected. + * This parameter can be: + * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31 + * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 + * and FLASH_WRProt_Pages124to127 + * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 + * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127 + * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511 + * @arg FLASH_WRProt_AllPages + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) +{ + uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; + + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); + + FLASH_Pages = (uint32_t)(~FLASH_Pages); + WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); + WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8); + WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16); + WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTPG_Set; + if(WRP0_Data != 0xFF) + { + OB->WRP0 = WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) + { + OB->WRP1 = WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) + { + OB->WRP2 = WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) + { + OB->WRP3 = WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the write protection operation Status */ + return status; +} + +/** + * @brief Enables or disables the read out protection. + * @note If the user has already programmed the other option bytes before calling + * this function, he must re-program them since this function erases all option bytes. + * @note This function can be used for all STM32F10x devices. + * @param Newstate: new state of the ReadOut Protection. + * This parameter can be: ENABLE or DISABLE. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + if(NewState != DISABLE) + { + OB->RDP = 0x00; + } + else + { + OB->RDP = RDP_Key; + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if(status != FLASH_TIMEOUT) + { + /* Disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + } + } + } + /* Return the protection operation Status */ + return status; +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @note This function can be used for all STM32F10x devices. + * @param OB_IWDG: Selects the IWDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software IWDG selected + * @arg OB_IWDG_HW: Hardware IWDG selected + * @param OB_STOP: Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NoRST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param OB_STDBY: Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Configures to boot from Bank1 or Bank2. + * @note This function can be used only for STM32F10x_XL density devices. + * @param FLASH_BOOT: select the FLASH Bank to boot from. + * This parameter can be one of the following values: + * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank1(Default). + * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank2 or Bank1, + * depending on the activation of the bank. The active banks are checked in + * the following order: Bank2, followed by Bank1. + * The active bank is recognized by the value programmed at the base address + * of the respective bank (corresponding to the initial stack pointer value + * in the interrupt vector table). + * For more information, please refer to AN2606 from www.st.com. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT) +{ + FLASH_Status status = FLASH_COMPLETE; + assert_param(IS_FLASH_BOOT(FLASH_BOOT)); + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + if(FLASH_BOOT == FLASH_BOOT_Bank1) + { + OB->USER |= OB_USER_BFB2; + } + else + { + OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2)); + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Returns the FLASH User Option Bytes values. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +uint32_t FLASH_GetUserOptionByte(void) +{ + /* Return the User Option Byte */ + return (uint32_t)(FLASH->OBR >> 2); +} + +/** + * @brief Returns the FLASH Write Protection Option Bytes Register value. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH Write Protection Option Bytes Register value + */ +uint32_t FLASH_GetWriteProtectionOptionByte(void) +{ + /* Return the Flash write protection Register value */ + return (uint32_t)(FLASH->WRPR); +} + +/** + * @brief Checks whether the FLASH Read Out Protection Status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH ReadOut Protection Status(SET or RESET) + */ +FlagStatus FLASH_GetReadOutProtectionStatus(void) +{ + FlagStatus readoutstatus = RESET; + if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) + { + readoutstatus = SET; + } + else + { + readoutstatus = RESET; + } + return readoutstatus; +} + +/** + * @brief Checks whether the FLASH Prefetch Buffer status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Prefetch Buffer Status (SET or RESET). + */ +FlagStatus FLASH_GetPrefetchBufferStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts + for Bank1 and Bank2. + * - For other devices it enables or disables the specified FLASH interrupts for Bank1. + * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_ERROR: FLASH Error Interrupt + * @arg FLASH_IT_EOP: FLASH end of operation Interrupt + * @param NewState: new state of the specified Flash interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((FLASH_IT & 0x80000000) != 0x0) + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF); + } + else + { + /* Disable the interrupt sources */ + FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF); + } + } + else + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } +#endif /* STM32F10X_XL */ +} + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function checks whether the specified + * Bank1 or Bank2 flag is set or not. + * - For other devices, it checks whether the specified Bank1 flag is + * set or not. + * @param FLASH_FLAG: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_BSY: FLASH Busy flag + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH_FLAG & 0x80000000) != 0x0) + { + if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } +#endif /* STM32F10X_XL */ + + /* Return the new state of FLASH_FLAG (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Clears the FLASH's pending flags. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags + * - For other devices, it clears Bank1’s pending flags. + * @param FLASH_FLAG: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @retval None + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + if((FLASH_FLAG & 0x80000000) != 0x0) + { + /* Clear the flags */ + FLASH->SR2 = FLASH_FLAG; + } + else + { + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; + } + +#else + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Returns the FLASH Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetBank1Status function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +/** + * @brief Returns the FLASH Bank1 Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetStatus function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank1Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +#ifdef STM32F10X_XL +/** + * @brief Returns the FLASH Bank2 Status. + * @note This function can be used for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank2Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} +#endif /* STM32F10X_XL */ +/** + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastBank1Operation. + * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation + * to complete or a TIMEOUT to occur. + * - For all other devices it waits for a Flash operation to complete + * or a TIMEOUT to occur. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_BUSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +/** + * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastOperation. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. + * @note This function can be used only for STM32F10x_XL density devices. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank2Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00)) + { + status = FLASH_GetBank2Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c new file mode 100644 index 00000000..c75137ca --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c @@ -0,0 +1,866 @@ +/** + ****************************************************************************** + * @file stm32f10x_fsmc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the FSMC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_fsmc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FSMC + * @brief FSMC driver modules + * @{ + */ + +/** @defgroup FSMC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup FSMC_Private_Defines + * @{ + */ + +/* --------------------- FSMC registers bit mask ---------------------------- */ + +/* FSMC BCRx Mask */ +#define BCR_MBKEN_Set ((uint32_t)0x00000001) +#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE) +#define BCR_FACCEN_Set ((uint32_t)0x00000040) + +/* FSMC PCRx Mask */ +#define PCR_PBKEN_Set ((uint32_t)0x00000004) +#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB) +#define PCR_ECCEN_Set ((uint32_t)0x00000040) +#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF) +#define PCR_MemoryType_NAND ((uint32_t)0x00000008) +/** + * @} + */ + +/** @defgroup FSMC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default + * reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @retval None + */ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + + /* FSMC_Bank1_NORSRAM1 */ + if(FSMC_Bank == FSMC_Bank1_NORSRAM1) + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; + } + /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ + else + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; + } + FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; + FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; +} + +/** + * @brief Deinitializes the FSMC NAND Banks registers to their default reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval None + */ +void FSMC_NANDDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Set the FSMC_Bank2 registers to their reset values */ + FSMC_Bank2->PCR2 = 0x00000018; + FSMC_Bank2->SR2 = 0x00000040; + FSMC_Bank2->PMEM2 = 0xFCFCFCFC; + FSMC_Bank2->PATT2 = 0xFCFCFCFC; + } + /* FSMC_Bank3_NAND */ + else + { + /* Set the FSMC_Bank3 registers to their reset values */ + FSMC_Bank3->PCR3 = 0x00000018; + FSMC_Bank3->SR3 = 0x00000040; + FSMC_Bank3->PMEM3 = 0xFCFCFCFC; + FSMC_Bank3->PATT3 = 0xFCFCFCFC; + } +} + +/** + * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values. + * @param None + * @retval None + */ +void FSMC_PCCARDDeInit(void) +{ + /* Set the FSMC_Bank4 registers to their reset values */ + FSMC_Bank4->PCR4 = 0x00000018; + FSMC_Bank4->SR4 = 0x00000000; + FSMC_Bank4->PMEM4 = 0xFCFCFCFC; + FSMC_Bank4->PATT4 = 0xFCFCFCFC; + FSMC_Bank4->PIO4 = 0xFCFCFCFC; +} + +/** + * @brief Initializes the FSMC NOR/SRAM Banks according to the specified + * parameters in the FSMC_NORSRAMInitStruct. + * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef + * structure that contains the configuration information for + * the FSMC NOR/SRAM specified Banks. + * @retval None + */ +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); + assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); + assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); + assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); + assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait)); + assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); + assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); + + /* Bank1 NOR/SRAM control register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | + FSMC_NORSRAMInitStruct->FSMC_MemoryType | + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | + FSMC_NORSRAMInitStruct->FSMC_WrapMode | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | + FSMC_NORSRAMInitStruct->FSMC_WriteOperation | + FSMC_NORSRAMInitStruct->FSMC_WaitSignal | + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | + FSMC_NORSRAMInitStruct->FSMC_WriteBurst; + + if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) + { + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set; + } + + /* Bank1 NOR/SRAM timing register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; + + + /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ + if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) + { + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; + } + else + { + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; + } +} + +/** + * @brief Initializes the FSMC NAND Banks according to the specified + * parameters in the FSMC_NANDInitStruct. + * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef + * structure that contains the configuration information for the FSMC + * NAND specified Banks. + * @retval None + */ +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; + + /* Check the parameters */ + assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); + assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); + assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); + assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); + assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); + assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); + assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ + tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature | + PCR_MemoryType_NAND | + FSMC_NANDInitStruct->FSMC_MemoryDataWidth | + FSMC_NANDInitStruct->FSMC_ECC | + FSMC_NANDInitStruct->FSMC_ECCPageSize | + (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| + (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); + + /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ + tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ + tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) + { + /* FSMC_Bank2_NAND registers configuration */ + FSMC_Bank2->PCR2 = tmppcr; + FSMC_Bank2->PMEM2 = tmppmem; + FSMC_Bank2->PATT2 = tmppatt; + } + else + { + /* FSMC_Bank3_NAND registers configuration */ + FSMC_Bank3->PCR3 = tmppcr; + FSMC_Bank3->PMEM3 = tmppmem; + FSMC_Bank3->PATT3 = tmppatt; + } +} + +/** + * @brief Initializes the FSMC PCCARD Bank according to the specified + * parameters in the FSMC_PCCARDInitStruct. + * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef + * structure that contains the configuration information for the FSMC + * PCCARD Bank. + * @retval None + */ +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); + assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ + FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature | + FSMC_MemoryDataWidth_16b | + (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | + (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); + + /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ + FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ + FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ + FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); +} + +/** + * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. + * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Reset NOR/SRAM Init structure parameters values */ + FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; + FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; + FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; +} + +/** + * @brief Fills each FSMC_NANDInitStruct member with its default value. + * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + /* Reset NAND Init structure parameters values */ + FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; + FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; + FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; + FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Fills each FSMC_PCCARDInitStruct member with its default value. + * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Reset PCCARD Init structure parameters values */ + FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Enables or disables the specified NOR/SRAM Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set; + } + else + { + /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset; + } +} + +/** + * @brief Enables or disables the specified NAND Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_PBKEN_Set; + } + else + { + FSMC_Bank3->PCR3 |= PCR_PBKEN_Set; + } + } + else + { + /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset; + } + else + { + FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset; + } + } +} + +/** + * @brief Enables or disables the PCCARD Memory Bank. + * @param NewState: new state of the PCCARD Memory Bank. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_PCCARDCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 |= PCR_PBKEN_Set; + } + else + { + /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset; + } +} + +/** + * @brief Enables or disables the FSMC NAND ECC feature. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC NAND ECC feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_ECCEN_Set; + } + else + { + FSMC_Bank3->PCR3 |= PCR_ECCEN_Set; + } + } + else + { + /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset; + } + else + { + FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset; + } + } +} + +/** + * @brief Returns the error correction code register value. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval The Error Correction Code (ECC) value. + */ +uint32_t FSMC_GetECC(uint32_t FSMC_Bank) +{ + uint32_t eccval = 0x00000000; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Get the ECCR2 register value */ + eccval = FSMC_Bank2->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + eccval = FSMC_Bank3->ECCR3; + } + /* Return the error correction code value */ + return(eccval); +} + +/** + * @brief Enables or disables the specified FSMC interrupts. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @param NewState: new state of the specified FSMC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState) +{ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 |= FSMC_IT; + } + } + else + { + /* Disable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + + FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT; + } + } +} + +/** + * @brief Checks whether the specified FSMC flag is set or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. + * @arg FSMC_FLAG_FEMPT: Fifo empty Flag. + * @retval The new state of FSMC_FLAG (SET or RESET). + */ +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpsr = 0x00000000; + + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + /* Get the flag status */ + if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET ) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the FSMC's pending flags. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. + * @retval None + */ +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~FSMC_FLAG; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~FSMC_FLAG; + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~FSMC_FLAG; + } +} + +/** + * @brief Checks whether the specified FSMC interrupt has occurred or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt source to check. + * This parameter can be one of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval The new state of FSMC_IT (SET or RESET). + */ +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; + + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + itstatus = tmpsr & FSMC_IT; + + itenable = tmpsr & (FSMC_IT >> 3); + if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the FSMC's interrupt pending bits. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval None + */ +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c new file mode 100644 index 00000000..93dbcd7c --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c @@ -0,0 +1,650 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the GPIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_gpio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +/** @defgroup GPIO_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------------*/ +#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) + +/* --- EVENTCR Register -----*/ + +/* Alias word address of EVOE bit */ +#define EVCR_OFFSET (AFIO_OFFSET + 0x00) +#define EVOE_BitNumber ((uint8_t)0x07) +#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) + + +/* --- MAPR Register ---*/ +/* Alias word address of MII_RMII_SEL bit */ +#define MAPR_OFFSET (AFIO_OFFSET + 0x04) +#define MII_RMII_SEL_BitNumber ((u8)0x17) +#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) + + +#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) +#define LSB_MASK ((uint16_t)0xFFFF) +#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) +#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) +#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) +#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval None + */ +void GPIO_DeInit(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + if (GPIOx == GPIOA) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); + } + else if (GPIOx == GPIOB) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); + } + else if (GPIOx == GPIOC) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); + } + else if (GPIOx == GPIOD) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); + } + else if (GPIOx == GPIOE) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); + } + else if (GPIOx == GPIOF) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); + } + else + { + if (GPIOx == GPIOG) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); + } + } +} + +/** + * @brief Deinitializes the Alternate Functions (remap, event control + * and EXTI configuration) registers to their default reset values. + * @param None + * @retval None + */ +void GPIO_AFIODeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); +} + +/** + * @brief Initializes the GPIOx peripheral according to the specified + * parameters in the GPIO_InitStruct. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that + * contains the configuration information for the specified GPIO peripheral. + * @retval None + */ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) +{ + uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; + uint32_t tmpreg = 0x00, pinmask = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); + assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); + +/*---------------------------- GPIO Mode Configuration -----------------------*/ + currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); + if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) + { + /* Check the parameters */ + assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); + /* Output mode */ + currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; + } +/*---------------------------- GPIO CRL Configuration ------------------------*/ + /* Configure the eight low port pins */ + if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) + { + tmpreg = GPIOx->CRL; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + /* Get the port pins position */ + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding low control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << pinpos); + } + else + { + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << pinpos); + } + } + } + } + GPIOx->CRL = tmpreg; + } +/*---------------------------- GPIO CRH Configuration ------------------------*/ + /* Configure the eight high port pins */ + if (GPIO_InitStruct->GPIO_Pin > 0x00FF) + { + tmpreg = GPIOx->CRH; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = (((uint32_t)0x01) << (pinpos + 0x08)); + /* Get the port pins position */ + currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding high control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + } + } + GPIOx->CRH = tmpreg; + } +} + +/** + * @brief Fills each GPIO_InitStruct member with its default value. + * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; +} + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO input data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO input data port value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->IDR); +} + +/** + * @brief Reads the specified output data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The output port pin value. + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO output data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO output data port value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->ODR); +} + +/** + * @brief Sets the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRR = GPIO_Pin; +} + +/** + * @brief Clears the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BRR = GPIO_Pin; +} + +/** + * @brief Sets or clears the selected data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_Pin_x where x can be (0..15). + * @param BitVal: specifies the value to be written to the selected bit. + * This parameter can be one of the BitAction enum values: + * @arg Bit_RESET: to clear the port pin + * @arg Bit_SET: to set the port pin + * @retval None + */ +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_BIT_ACTION(BitVal)); + + if (BitVal != Bit_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BRR = GPIO_Pin; + } +} + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param PortVal: specifies the value to be written to the port output data register. + * @retval None + */ +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR = PortVal; +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t tmp = 0x00010000; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + tmp |= GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Reset LCKK bit */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; +} + +/** + * @brief Selects the GPIO pin used as Event output. + * @param GPIO_PortSource: selects the GPIO port to be used as source + * for Event output. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). + * @param GPIO_PinSource: specifies the pin for the Event output. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmpreg = AFIO->EVCR; + /* Clear the PORT[6:4] and PIN[3:0] bits */ + tmpreg &= EVCR_PORTPINCONFIG_MASK; + tmpreg |= (uint32_t)GPIO_PortSource << 0x04; + tmpreg |= GPIO_PinSource; + AFIO->EVCR = tmpreg; +} + +/** + * @brief Enables or disables the Event Output. + * @param NewState: new state of the Event output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_EventOutputCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState; +} + +/** + * @brief Changes the mapping of the specified pin. + * @param GPIO_Remap: selects the pin to remap. + * This parameter can be one of the following values: + * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping + * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping + * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping + * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping + * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping + * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping + * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping + * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping + * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping + * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping + * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration + * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices) + * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices) + * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST + * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled + * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP) + * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) + * When the SPI3/I2S3 is remapped using this function, the SWJ is configured + * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST. + * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected + * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices) + * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to + * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output. + * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) + * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices) + * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) + * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices) + * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + * only for High density Value line devices) + * @param NewState: new state of the port pin remapping. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) +{ + uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_REMAP(GPIO_Remap)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + tmpreg = AFIO->MAPR2; + } + else + { + tmpreg = AFIO->MAPR; + } + + tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; + tmp = GPIO_Remap & LSB_MASK; + + if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) + { + tmpreg &= DBGAFR_SWJCFG_MASK; + AFIO->MAPR &= DBGAFR_SWJCFG_MASK; + } + else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) + { + tmp1 = ((uint32_t)0x03) << tmpmask; + tmpreg &= ~tmp1; + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + else + { + tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + + if (NewState != DISABLE) + { + tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); + } + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + AFIO->MAPR2 = tmpreg; + } + else + { + AFIO->MAPR = tmpreg; + } +} + +/** + * @brief Selects the GPIO pin used as EXTI Line. + * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). + * @param GPIO_PinSource: specifies the EXTI line to be configured. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmp = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); + AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; + AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); +} + +/** + * @brief Selects the Ethernet media interface. + * @note This function applies only to STM32 Connectivity line devices. + * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode. + * This parameter can be one of the following values: + * @arg GPIO_ETH_MediaInterface_MII: MII mode + * @arg GPIO_ETH_MediaInterface_RMII: RMII mode + * @retval None + */ +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) +{ + assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); + + /* Configure MII_RMII selection bit */ + *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c new file mode 100644 index 00000000..88967268 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c @@ -0,0 +1,1331 @@ +/** + ****************************************************************************** + * @file stm32f10x_i2c.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the I2C firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_i2c.h" +#include "stm32f10x_rcc.h" + + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup I2C + * @brief I2C driver modules + * @{ + */ + +/** @defgroup I2C_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Defines + * @{ + */ + +/* I2C SPE mask */ +#define CR1_PE_Set ((uint16_t)0x0001) +#define CR1_PE_Reset ((uint16_t)0xFFFE) + +/* I2C START mask */ +#define CR1_START_Set ((uint16_t)0x0100) +#define CR1_START_Reset ((uint16_t)0xFEFF) + +/* I2C STOP mask */ +#define CR1_STOP_Set ((uint16_t)0x0200) +#define CR1_STOP_Reset ((uint16_t)0xFDFF) + +/* I2C ACK mask */ +#define CR1_ACK_Set ((uint16_t)0x0400) +#define CR1_ACK_Reset ((uint16_t)0xFBFF) + +/* I2C ENGC mask */ +#define CR1_ENGC_Set ((uint16_t)0x0040) +#define CR1_ENGC_Reset ((uint16_t)0xFFBF) + +/* I2C SWRST mask */ +#define CR1_SWRST_Set ((uint16_t)0x8000) +#define CR1_SWRST_Reset ((uint16_t)0x7FFF) + +/* I2C PEC mask */ +#define CR1_PEC_Set ((uint16_t)0x1000) +#define CR1_PEC_Reset ((uint16_t)0xEFFF) + +/* I2C ENPEC mask */ +#define CR1_ENPEC_Set ((uint16_t)0x0020) +#define CR1_ENPEC_Reset ((uint16_t)0xFFDF) + +/* I2C ENARP mask */ +#define CR1_ENARP_Set ((uint16_t)0x0010) +#define CR1_ENARP_Reset ((uint16_t)0xFFEF) + +/* I2C NOSTRETCH mask */ +#define CR1_NOSTRETCH_Set ((uint16_t)0x0080) +#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F) + +/* I2C registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0xFBF5) + +/* I2C DMAEN mask */ +#define CR2_DMAEN_Set ((uint16_t)0x0800) +#define CR2_DMAEN_Reset ((uint16_t)0xF7FF) + +/* I2C LAST mask */ +#define CR2_LAST_Set ((uint16_t)0x1000) +#define CR2_LAST_Reset ((uint16_t)0xEFFF) + +/* I2C FREQ mask */ +#define CR2_FREQ_Reset ((uint16_t)0xFFC0) + +/* I2C ADD0 mask */ +#define OAR1_ADD0_Set ((uint16_t)0x0001) +#define OAR1_ADD0_Reset ((uint16_t)0xFFFE) + +/* I2C ENDUAL mask */ +#define OAR2_ENDUAL_Set ((uint16_t)0x0001) +#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE) + +/* I2C ADD2 mask */ +#define OAR2_ADD2_Reset ((uint16_t)0xFF01) + +/* I2C F/S mask */ +#define CCR_FS_Set ((uint16_t)0x8000) + +/* I2C CCR mask */ +#define CCR_CCR_Set ((uint16_t)0x0FFF) + +/* I2C FLAG mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) + +/* I2C Interrupt Enable mask */ +#define ITEN_Mask ((uint32_t)0x07000000) + +/** + * @} + */ + +/** @defgroup I2C_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the I2Cx peripheral registers to their default reset values. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval None + */ +void I2C_DeInit(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if (I2Cx == I2C1) + { + /* Enable I2C1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); + /* Release I2C1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); + } + else + { + /* Enable I2C2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); + /* Release I2C2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); + } +} + +/** + * @brief Initializes the I2Cx peripheral according to the specified + * parameters in the I2C_InitStruct. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that + * contains the configuration information for the specified I2C peripheral. + * @retval None + */ +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) +{ + uint16_t tmpreg = 0, freqrange = 0; + uint16_t result = 0x04; + uint32_t pclk1 = 8000000; + RCC_ClocksTypeDef rcc_clocks; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); + assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); + assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); + assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); + +/*---------------------------- I2Cx CR2 Configuration ------------------------*/ + /* Get the I2Cx CR2 value */ + tmpreg = I2Cx->CR2; + /* Clear frequency FREQ[5:0] bits */ + tmpreg &= CR2_FREQ_Reset; + /* Get pclk1 frequency value */ + RCC_GetClocksFreq(&rcc_clocks); + pclk1 = rcc_clocks.PCLK1_Frequency; + /* Set frequency bits depending on pclk1 value */ + freqrange = (uint16_t)(pclk1 / 1000000); + tmpreg |= freqrange; + /* Write to I2Cx CR2 */ + I2Cx->CR2 = tmpreg; + +/*---------------------------- I2Cx CCR Configuration ------------------------*/ + /* Disable the selected I2C peripheral to configure TRISE */ + I2Cx->CR1 &= CR1_PE_Reset; + /* Reset tmpreg value */ + /* Clear F/S, DUTY and CCR[11:0] bits */ + tmpreg = 0; + + /* Configure speed in standard mode */ + if (I2C_InitStruct->I2C_ClockSpeed <= 100000) + { + /* Standard mode speed calculate */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); + /* Test if CCR value is under 0x4*/ + if (result < 0x04) + { + /* Set minimum allowed value */ + result = 0x04; + } + /* Set speed value for standard mode */ + tmpreg |= result; + /* Set Maximum Rise Time for standard mode */ + I2Cx->TRISE = freqrange + 1; + } + /* Configure speed in fast mode */ + else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ + { + if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) + { + /* Fast mode speed calculate: Tlow/Thigh = 2 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); + } + else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ + { + /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); + /* Set DUTY bit */ + result |= I2C_DutyCycle_16_9; + } + + /* Test if CCR value is under 0x1*/ + if ((result & CCR_CCR_Set) == 0) + { + /* Set minimum allowed value */ + result |= (uint16_t)0x0001; + } + /* Set speed value and set F/S bit for fast mode */ + tmpreg |= (uint16_t)(result | CCR_FS_Set); + /* Set Maximum Rise Time for fast mode */ + I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); + } + + /* Write to I2Cx CCR */ + I2Cx->CCR = tmpreg; + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= CR1_PE_Set; + +/*---------------------------- I2Cx CR1 Configuration ------------------------*/ + /* Get the I2Cx CR1 value */ + tmpreg = I2Cx->CR1; + /* Clear ACK, SMBTYPE and SMBUS bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure I2Cx: mode and acknowledgement */ + /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ + /* Set ACK bit according to I2C_Ack value */ + tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); + /* Write to I2Cx CR1 */ + I2Cx->CR1 = tmpreg; + +/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ + /* Set I2Cx Own Address1 and acknowledged address */ + I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); +} + +/** + * @brief Fills each I2C_InitStruct member with its default value. + * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) +{ +/*---------------- Reset I2C init structure parameters values ----------------*/ + /* initialize the I2C_ClockSpeed member */ + I2C_InitStruct->I2C_ClockSpeed = 5000; + /* Initialize the I2C_Mode member */ + I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; + /* Initialize the I2C_DutyCycle member */ + I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; + /* Initialize the I2C_OwnAddress1 member */ + I2C_InitStruct->I2C_OwnAddress1 = 0; + /* Initialize the I2C_Ack member */ + I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; + /* Initialize the I2C_AcknowledgedAddress member */ + I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; +} + +/** + * @brief Enables or disables the specified I2C peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= CR1_PE_Set; + } + else + { + /* Disable the selected I2C peripheral */ + I2Cx->CR1 &= CR1_PE_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C DMA requests. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C DMA requests */ + I2Cx->CR2 |= CR2_DMAEN_Set; + } + else + { + /* Disable the selected I2C DMA requests */ + I2Cx->CR2 &= CR2_DMAEN_Reset; + } +} + +/** + * @brief Specifies if the next DMA transfer will be the last one. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA last transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Next DMA transfer is the last transfer */ + I2Cx->CR2 |= CR2_LAST_Set; + } + else + { + /* Next DMA transfer is not the last transfer */ + I2Cx->CR2 &= CR2_LAST_Reset; + } +} + +/** + * @brief Generates I2Cx communication START condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C START condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a START condition */ + I2Cx->CR1 |= CR1_START_Set; + } + else + { + /* Disable the START condition generation */ + I2Cx->CR1 &= CR1_START_Reset; + } +} + +/** + * @brief Generates I2Cx communication STOP condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C STOP condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a STOP condition */ + I2Cx->CR1 |= CR1_STOP_Set; + } + else + { + /* Disable the STOP condition generation */ + I2Cx->CR1 &= CR1_STOP_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C acknowledge feature. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C Acknowledgement. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the acknowledgement */ + I2Cx->CR1 |= CR1_ACK_Set; + } + else + { + /* Disable the acknowledgement */ + I2Cx->CR1 &= CR1_ACK_Reset; + } +} + +/** + * @brief Configures the specified I2C own address2. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the 7bit I2C own address2. + * @retval None. + */ +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Get the old register value */ + tmpreg = I2Cx->OAR2; + + /* Reset I2Cx Own address2 bit [7:1] */ + tmpreg &= OAR2_ADD2_Reset; + + /* Set I2Cx Own address2 */ + tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); + + /* Store the new register value */ + I2Cx->OAR2 = tmpreg; +} + +/** + * @brief Enables or disables the specified I2C dual addressing mode. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C dual addressing mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable dual addressing mode */ + I2Cx->OAR2 |= OAR2_ENDUAL_Set; + } + else + { + /* Disable dual addressing mode */ + I2Cx->OAR2 &= OAR2_ENDUAL_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C general call feature. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C General call. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable generall call */ + I2Cx->CR1 |= CR1_ENGC_Set; + } + else + { + /* Disable generall call */ + I2Cx->CR1 &= CR1_ENGC_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C interrupts. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg I2C_IT_BUF: Buffer interrupt mask + * @arg I2C_IT_EVT: Event interrupt mask + * @arg I2C_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified I2C interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_I2C_CONFIG_IT(I2C_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected I2C interrupts */ + I2Cx->CR2 |= I2C_IT; + } + else + { + /* Disable the selected I2C interrupts */ + I2Cx->CR2 &= (uint16_t)~I2C_IT; + } +} + +/** + * @brief Sends a data byte through the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Data: Byte to be transmitted.. + * @retval None + */ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Write in the DR register the data to be sent */ + I2Cx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The value of the received data. + */ +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the data in the DR register */ + return (uint8_t)I2Cx->DR; +} + +/** + * @brief Transmits the address byte to select the slave device. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the slave address which will be transmitted + * @param I2C_Direction: specifies whether the I2C device will be a + * Transmitter or a Receiver. This parameter can be one of the following values + * @arg I2C_Direction_Transmitter: Transmitter mode + * @arg I2C_Direction_Receiver: Receiver mode + * @retval None. + */ +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DIRECTION(I2C_Direction)); + /* Test on the direction to set/reset the read/write bit */ + if (I2C_Direction != I2C_Direction_Transmitter) + { + /* Set the address bit0 for read */ + Address |= OAR1_ADD0_Set; + } + else + { + /* Reset the address bit0 for write */ + Address &= OAR1_ADD0_Reset; + } + /* Send the address */ + I2Cx->DR = Address; +} + +/** + * @brief Reads the specified I2C register and returns its value. + * @param I2C_Register: specifies the register to read. + * This parameter can be one of the following values: + * @arg I2C_Register_CR1: CR1 register. + * @arg I2C_Register_CR2: CR2 register. + * @arg I2C_Register_OAR1: OAR1 register. + * @arg I2C_Register_OAR2: OAR2 register. + * @arg I2C_Register_DR: DR register. + * @arg I2C_Register_SR1: SR1 register. + * @arg I2C_Register_SR2: SR2 register. + * @arg I2C_Register_CCR: CCR register. + * @arg I2C_Register_TRISE: TRISE register. + * @retval The value of the read register. + */ +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_REGISTER(I2C_Register)); + + tmp = (uint32_t) I2Cx; + tmp += I2C_Register; + + /* Return the selected register value */ + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Enables or disables the specified I2C software reset. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C software reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Peripheral under reset */ + I2Cx->CR1 |= CR1_SWRST_Set; + } + else + { + /* Peripheral not under reset */ + I2Cx->CR1 &= CR1_SWRST_Reset; + } +} + +/** + * @brief Selects the specified I2C NACK position in master receiver mode. + * This function is useful in I2C Master Receiver mode when the number + * of data to be received is equal to 2. In this case, this function + * should be called (with parameter I2C_NACKPosition_Next) before data + * reception starts,as described in the 2-byte reception procedure + * recommended in Reference Manual in Section: Master receiver. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_NACKPosition: specifies the NACK position. + * This parameter can be one of the following values: + * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last + * received byte. + * @arg I2C_NACKPosition_Current: indicates that current byte is the last + * received byte. + * + * @note This function configures the same bit (POS) as I2C_PECPositionConfig() + * but is intended to be used in I2C mode while I2C_PECPositionConfig() + * is intended to used in SMBUS mode. + * + * @retval None + */ +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition)); + + /* Check the input parameter */ + if (I2C_NACKPosition == I2C_NACKPosition_Next) + { + /* Next byte in shift register is the last received byte */ + I2Cx->CR1 |= I2C_NACKPosition_Next; + } + else + { + /* Current byte in shift register is the last received byte */ + I2Cx->CR1 &= I2C_NACKPosition_Current; + } +} + +/** + * @brief Drives the SMBusAlert pin high or low for the specified I2C. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_SMBusAlert: specifies SMBAlert pin level. + * This parameter can be one of the following values: + * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low + * @arg I2C_SMBusAlert_High: SMBAlert pin driven high + * @retval None + */ +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); + if (I2C_SMBusAlert == I2C_SMBusAlert_Low) + { + /* Drive the SMBusAlert pin Low */ + I2Cx->CR1 |= I2C_SMBusAlert_Low; + } + else + { + /* Drive the SMBusAlert pin High */ + I2Cx->CR1 &= I2C_SMBusAlert_High; + } +} + +/** + * @brief Enables or disables the specified I2C PEC transfer. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C PEC transmission. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC transmission */ + I2Cx->CR1 |= CR1_PEC_Set; + } + else + { + /* Disable the selected I2C PEC transmission */ + I2Cx->CR1 &= CR1_PEC_Reset; + } +} + +/** + * @brief Selects the specified I2C PEC position. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_PECPosition: specifies the PEC position. + * This parameter can be one of the following values: + * @arg I2C_PECPosition_Next: indicates that the next byte is PEC + * @arg I2C_PECPosition_Current: indicates that current byte is PEC + * + * @note This function configures the same bit (POS) as I2C_NACKPositionConfig() + * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() + * is intended to used in I2C mode. + * + * @retval None + */ +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); + if (I2C_PECPosition == I2C_PECPosition_Next) + { + /* Next byte in shift register is PEC */ + I2Cx->CR1 |= I2C_PECPosition_Next; + } + else + { + /* Current byte in shift register is PEC */ + I2Cx->CR1 &= I2C_PECPosition_Current; + } +} + +/** + * @brief Enables or disables the PEC value calculation of the transferred bytes. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx PEC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC calculation */ + I2Cx->CR1 |= CR1_ENPEC_Set; + } + else + { + /* Disable the selected I2C PEC calculation */ + I2Cx->CR1 &= CR1_ENPEC_Reset; + } +} + +/** + * @brief Returns the PEC value for the specified I2C. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The PEC value. + */ +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the selected I2C PEC value */ + return ((I2Cx->SR2) >> 8); +} + +/** + * @brief Enables or disables the specified I2C ARP. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx ARP. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C ARP */ + I2Cx->CR1 |= CR1_ENARP_Set; + } + else + { + /* Disable the selected I2C ARP */ + I2Cx->CR1 &= CR1_ENARP_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C Clock stretching. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Clock stretching. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState == DISABLE) + { + /* Enable the selected I2C Clock stretching */ + I2Cx->CR1 |= CR1_NOSTRETCH_Set; + } + else + { + /* Disable the selected I2C Clock stretching */ + I2Cx->CR1 &= CR1_NOSTRETCH_Reset; + } +} + +/** + * @brief Selects the specified I2C fast mode duty cycle. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_DutyCycle: specifies the fast mode duty cycle. + * This parameter can be one of the following values: + * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 + * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 + * @retval None + */ +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); + if (I2C_DutyCycle != I2C_DutyCycle_16_9) + { + /* I2C fast mode Tlow/Thigh=2 */ + I2Cx->CCR &= I2C_DutyCycle_2; + } + else + { + /* I2C fast mode Tlow/Thigh=16/9 */ + I2Cx->CCR |= I2C_DutyCycle_16_9; + } +} + + + +/** + * @brief + **************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * depending on the application requirements and constraints: + * + * + * 1) Basic state monitoring: + * Using I2C_CheckEvent() function: + * It compares the status registers (SR1 and SR2) content to a given event + * (can be the combination of one or more flags). + * It returns SUCCESS if the current status includes the given flags + * and returns ERROR if one or more flags are missing in the current status. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (RM0008). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs (ie. error flags are set besides to the monitored flags), + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * hold or corrupted real state. + * In this case, it is advised to use error interrupts to monitor the error + * events and handle them in the interrupt IRQ handler. + * + * @note + * For error management, it is advised to use the following functions: + * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() + * in order to determine which error occured. + * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + * and/or I2C_GenerateStop() in order to clear the error flag and source, + * and return to correct communication status. + * + * + * 2) Advanced state monitoring: + * Using the function I2C_GetLastEvent() which returns the image of both status + * registers in a single word (uint32_t) (Status Register 2 value is shifted left + * by 16 bits and concatenated to Status Register 1). + * - When to use: + * - This function is suitable for the same applications above but it allows to + * overcome the mentioned limitation of I2C_GetFlagStatus() function. + * The returned value could be compared to events already defined in the + * library (stm32f10x_i2c.h) or to custom values defined by user. + * - This function is suitable when multiple flags are monitored at the same time. + * - At the opposite of I2C_CheckEvent() function, this function allows user to + * choose when an event is accepted (when all events flags are set and no + * other flags are set or just when the needed flags are set like + * I2C_CheckEvent() function). + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * 3) Flag-based state monitoring: + * Using the function I2C_GetFlagStatus() which simply returns the status of + * one single flag (ie. I2C_FLAG_RXNE ...). + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed (most I2C events + * are monitored through multiple flags). + * - Limitations: + * - When calling this function, the Status register is accessed. Some flags are + * cleared when the status register is accessed. So checking the status + * of one Flag, may clear other ones. + * - Function may need to be called twice or more in order to monitor one + * single event. + * + * For detailed description of Events, please refer to section I2C_Events in + * stm32f10x_i2c.h file. + * + */ + +/** + * + * 1) Basic state monitoring + ******************************************************************************* + */ + +/** + * @brief Checks whether the last I2Cx Event is equal to the one passed + * as parameter. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_EVENT: specifies the event to be checked. + * This parameter can be one of the following values: + * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2 + * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3 + * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2 + * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4 + * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5 + * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6 + * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6 + * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2 + * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 + * + * @note: For detailed description of Events, please refer to section + * I2C_Events in stm32f10x_i2c.h file. + * + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Last event is equal to the I2C_EVENT + * - ERROR: Last event is different from the I2C_EVENT + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_EVENT(I2C_EVENT)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_Mask; + + /* Check whether the last event contains the I2C_EVENT */ + if ((lastevent & I2C_EVENT) == I2C_EVENT) + { + /* SUCCESS: last event is equal to I2C_EVENT */ + status = SUCCESS; + } + else + { + /* ERROR: last event is different from I2C_EVENT */ + status = ERROR; + } + /* Return status */ + return status; +} + +/** + * + * 2) Advanced state monitoring + ******************************************************************************* + */ + +/** + * @brief Returns the last I2Cx Event. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * + * @note: For detailed description of Events, please refer to section + * I2C_Events in stm32f10x_i2c.h file. + * + * @retval The last event + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_Mask; + + /* Return status */ + return lastevent; +} + +/** + * + * 3) Flag-based state monitoring + ******************************************************************************* + */ + +/** + * @brief Checks whether the specified I2C flag is set or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) + * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) + * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) + * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) + * @arg I2C_FLAG_TRA: Transmitter/Receiver flag + * @arg I2C_FLAG_BUSY: Bus busy flag + * @arg I2C_FLAG_MSL: Master/Slave flag + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) + * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag + * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) + * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_FLAG_BTF: Byte transfer finished flag + * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDA" + * @arg I2C_FLAG_SB: Start bit flag (Master mode) + * @retval The new state of I2C_FLAG (SET or RESET). + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + FlagStatus bitstatus = RESET; + __IO uint32_t i2creg = 0, i2cxbase = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); + + /* Get the I2Cx peripheral base address */ + i2cxbase = (uint32_t)I2Cx; + + /* Read flag register index */ + i2creg = I2C_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + I2C_FLAG &= FLAG_Mask; + + if(i2creg != 0) + { + /* Get the I2Cx SR1 register address */ + i2cxbase += 0x14; + } + else + { + /* Flag in I2Cx SR2 Register */ + I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); + /* Get the I2Cx SR2 register address */ + i2cxbase += 0x18; + } + + if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) + { + /* I2C_FLAG is set */ + bitstatus = SET; + } + else + { + /* I2C_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the I2C_FLAG status */ + return bitstatus; +} + + + +/** + * @brief Clears the I2Cx's pending flags. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * + * @note + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation + * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the + * second byte of the address in DR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 + * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR + * register (I2C_SendData()). + * @retval None + */ +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); + /* Get the I2C flag position */ + flagpos = I2C_FLAG & FLAG_Mask; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @brief Checks whether the specified I2C interrupt has occurred or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert flag + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_IT_PECERR: PEC error in reception flag + * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure flag + * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_IT_BERR: Bus error flag + * @arg I2C_IT_TXE: Data register empty flag (Transmitter) + * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag + * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) + * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_IT_BTF: Byte transfer finished flag + * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDAD" + * @arg I2C_IT_SB: Start bit flag (Master mode) + * @retval The new state of I2C_IT (SET or RESET). + */ +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_IT(I2C_IT)); + + /* Check if the interrupt source is enabled or not */ + enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ; + + /* Get bit[23:0] of the flag */ + I2C_IT &= FLAG_Mask; + + /* Check the status of the specified I2C flag */ + if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) + { + /* I2C_IT is set */ + bitstatus = SET; + } + else + { + /* I2C_IT is reset */ + bitstatus = RESET; + } + /* Return the I2C_IT status */ + return bitstatus; +} + +/** + * @brief Clears the I2Cx’s interrupt pending bits. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert interrupt + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt + * @arg I2C_IT_PECERR: PEC error in reception interrupt + * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure interrupt + * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) + * @arg I2C_IT_BERR: Bus error interrupt + * + * @note + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second + * byte of the address in I2C_DR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_DR register (I2C_SendData()). + * @retval None + */ +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_IT(I2C_IT)); + /* Get the I2C flag position */ + flagpos = I2C_IT & FLAG_Mask; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c new file mode 100644 index 00000000..9d3b0e85 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c @@ -0,0 +1,190 @@ +/** + ****************************************************************************** + * @file stm32f10x_iwdg.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the IWDG firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_iwdg.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup IWDG + * @brief IWDG driver modules + * @{ + */ + +/** @defgroup IWDG_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Defines + * @{ + */ + +/* ---------------------- IWDG registers bit mask ----------------------------*/ + +/* KR register bit mask */ +#define KR_KEY_Reload ((uint16_t)0xAAAA) +#define KR_KEY_Enable ((uint16_t)0xCCCC) + +/** + * @} + */ + +/** @defgroup IWDG_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Functions + * @{ + */ + +/** + * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. + * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. + * This parameter can be one of the following values: + * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers + * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers + * @retval None + */ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) +{ + /* Check the parameters */ + assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); + IWDG->KR = IWDG_WriteAccess; +} + +/** + * @brief Sets IWDG Prescaler value. + * @param IWDG_Prescaler: specifies the IWDG Prescaler value. + * This parameter can be one of the following values: + * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 + * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 + * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 + * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 + * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 + * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 + * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 + * @retval None + */ +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); + IWDG->PR = IWDG_Prescaler; +} + +/** + * @brief Sets IWDG Reload value. + * @param Reload: specifies the IWDG Reload value. + * This parameter must be a number between 0 and 0x0FFF. + * @retval None + */ +void IWDG_SetReload(uint16_t Reload) +{ + /* Check the parameters */ + assert_param(IS_IWDG_RELOAD(Reload)); + IWDG->RLR = Reload; +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_ReloadCounter(void) +{ + IWDG->KR = KR_KEY_Reload; +} + +/** + * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_Enable(void) +{ + IWDG->KR = KR_KEY_Enable; +} + +/** + * @brief Checks whether the specified IWDG flag is set or not. + * @param IWDG_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg IWDG_FLAG_PVU: Prescaler Value Update on going + * @arg IWDG_FLAG_RVU: Reload Value Update on going + * @retval The new state of IWDG_FLAG (SET or RESET). + */ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_IWDG_FLAG(IWDG_FLAG)); + if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c new file mode 100644 index 00000000..147bf0f8 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32f10x_pwr.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the PWR firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup PWR + * @brief PWR driver modules + * @{ + */ + +/** @defgroup PWR_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Defines + * @{ + */ + +/* --------- PWR registers bit address in the alias region ---------- */ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of DBP bit */ +#define CR_OFFSET (PWR_OFFSET + 0x00) +#define DBP_BitNumber 0x08 +#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) + +/* Alias word address of PVDE bit */ +#define PVDE_BitNumber 0x04 +#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of EWUP bit */ +#define CSR_OFFSET (PWR_OFFSET + 0x04) +#define EWUP_BitNumber 0x08 +#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) + +/* ------------------ PWR registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_DS_MASK ((uint32_t)0xFFFFFFFC) +#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) + + +/** + * @} + */ + +/** @defgroup PWR_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @param None + * @retval None + */ +void PWR_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); +} + +/** + * @brief Enables or disables access to the RTC and backup registers. + * @param NewState: new state of the access to the RTC and backup registers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_BackupAccessCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Power Voltage Detector(PVD). + * @param NewState: new state of the PVD. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_PVDCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param PWR_PVDLevel: specifies the PVD detection level + * This parameter can be one of the following values: + * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V + * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V + * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V + * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V + * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V + * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V + * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V + * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V + * @retval None + */ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); + tmpreg = PWR->CR; + /* Clear PLS[7:5] bits */ + tmpreg &= CR_PLS_MASK; + /* Set PLS[7:5] bits according to PWR_PVDLevel value */ + tmpreg |= PWR_PVDLevel; + /* Store the new value */ + PWR->CR = tmpreg; +} + +/** + * @brief Enables or disables the WakeUp Pin functionality. + * @param NewState: new state of the WakeUp Pin functionality. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_WakeUpPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; +} + +/** + * @brief Enters STOP mode. + * @param PWR_Regulator: specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_Regulator_ON: STOP mode with regulator ON + * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode + * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction + * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction + * @retval None + */ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(PWR_Regulator)); + assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + /* Clear PDDS and LPDS bits */ + tmpreg &= CR_DS_MASK; + /* Set LPDS bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator; + /* Store the new value */ + PWR->CR = tmpreg; + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP; + + /* Select STOP mode entry --------------------------------------------------*/ + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +} + +/** + * @brief Enters STANDBY mode. + * @param None + * @retval None + */ +void PWR_EnterSTANDBYMode(void) +{ + /* Clear Wake-up flag */ + PWR->CR |= PWR_CR_CWUF; + /* Select STANDBY mode */ + PWR->CR |= PWR_CR_PDDS; + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP; +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM ) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief Checks whether the specified PWR flag is set or not. + * @param PWR_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @arg PWR_FLAG_PVDO: PVD Output + * @retval The new state of PWR_FLAG (SET or RESET). + */ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); + + if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the PWR's pending flags. + * @param PWR_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @retval None + */ +void PWR_ClearFlag(uint32_t PWR_FLAG) +{ + /* Check the parameters */ + assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); + + PWR->CR |= PWR_FLAG << 2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c new file mode 100644 index 00000000..4b2ec1f1 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c @@ -0,0 +1,1470 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RCC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/** @defgroup RCC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------- */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of HSION bit */ +#define CR_OFFSET (RCC_OFFSET + 0x00) +#define HSION_BitNumber 0x00 +#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) + +/* Alias word address of PLLON bit */ +#define PLLON_BitNumber 0x18 +#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) + +#ifdef STM32F10X_CL + /* Alias word address of PLL2ON bit */ + #define PLL2ON_BitNumber 0x1A + #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) + + /* Alias word address of PLL3ON bit */ + #define PLL3ON_BitNumber 0x1C + #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* Alias word address of CSSON bit */ +#define CSSON_BitNumber 0x13 +#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) + +/* --- CFGR Register ---*/ + +/* Alias word address of USBPRE bit */ +#define CFGR_OFFSET (RCC_OFFSET + 0x04) + +#ifndef STM32F10X_CL + #define USBPRE_BitNumber 0x16 + #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) +#else + #define OTGFSPRE_BitNumber 0x16 + #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* --- BDCR Register ---*/ + +/* Alias word address of RTCEN bit */ +#define BDCR_OFFSET (RCC_OFFSET + 0x20) +#define RTCEN_BitNumber 0x0F +#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) + +/* Alias word address of BDRST bit */ +#define BDRST_BitNumber 0x10 +#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of LSION bit */ +#define CSR_OFFSET (RCC_OFFSET + 0x24) +#define LSION_BitNumber 0x00 +#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) + +#ifdef STM32F10X_CL +/* --- CFGR2 Register ---*/ + + /* Alias word address of I2S2SRC bit */ + #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) + #define I2S2SRC_BitNumber 0x11 + #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) + + /* Alias word address of I2S3SRC bit */ + #define I2S3SRC_BitNumber 0x12 + #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* ---------------------- RCC registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) +#define CR_HSEBYP_Set ((uint32_t)0x00040000) +#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) +#define CR_HSEON_Set ((uint32_t)0x00010000) +#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) + +/* CFGR register bit mask */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) +#else + #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) +#endif /* STM32F10X_CL */ + +#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) +#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) +#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) +#define CFGR_SWS_Mask ((uint32_t)0x0000000C) +#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) +#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) +#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) +#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) +#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) +#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) +#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) +#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) +#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) + +/* CSR register bit mask */ +#define CSR_RMVF_Set ((uint32_t)0x01000000) + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/* CFGR2 register bit mask */ + #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) + #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) +#endif +#ifdef STM32F10X_CL + #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) + #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) + #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) +#endif /* STM32F10X_CL */ + +/* RCC Flag Mask */ +#define FLAG_Mask ((uint8_t)0x1F) + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) + +/* CFGR register byte 4 (Bits[31:24]) base address */ +#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) + +/* BDCR register base address */ +#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) + +/** + * @} + */ + +/** @defgroup RCC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Variables + * @{ + */ + +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; +static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; + +/** + * @} + */ + +/** @defgroup RCC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note HSE can not be stopped if it is used directly or through the PLL as system clock. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: HSE oscillator OFF + * @arg RCC_HSE_ON: HSE oscillator ON + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint32_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + /* Reset HSEON bit */ + RCC->CR &= CR_HSEON_Reset; + /* Reset HSEBYP bit */ + RCC->CR &= CR_HSEBYP_Reset; + /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ + switch(RCC_HSE) + { + case RCC_HSE_ON: + /* Set HSEON bit */ + RCC->CR |= CR_HSEON_Set; + break; + + case RCC_HSE_Bypass: + /* Set HSEBYP and HSEON bits */ + RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; + break; + + default: + break; + } +} + +/** + * @brief Waits for HSE start-up. + * @param None + * @retval An ErrorStatus enumuration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + ErrorStatus status = ERROR; + FlagStatus HSEStatus = RESET; + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @param HSICalibrationValue: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); + tmpreg = RCC->CR; + /* Clear HSITRIM[4:0] bits */ + tmpreg &= CR_HSITRIM_Mask; + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used directly or through the PLL as system clock. + * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the PLL clock source and multiplication factor. + * @note This function must be used only when the PLL is disabled. + * @param RCC_PLLSource: specifies the PLL entry clock source. + * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, + * this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry + * @param RCC_PLLMul: specifies the PLL multiplication factor. + * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} + * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); + + tmpreg = RCC->CFGR; + /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + tmpreg &= CFGR_PLL_Mask; + /* Set the PLL configuration bits */ + tmpreg |= RCC_PLLSource | RCC_PLLMul; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the PLL. + * @note The PLL can not be disabled if it is used as system clock. + * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/** + * @brief Configures the PREDIV1 division factor. + * @note + * - This function must be used only when the PLL is disabled. + * - This function applies only to STM32 Connectivity line and Value line + * devices. + * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. + * This parameter can be one of the following values: + * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock + * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock + * @note + * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE + * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. + * This parameter can be RCC_PREDIV1_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); + assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ + tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); + /* Set the PREDIV1 clock source and division factor */ + tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} +#endif + +#ifdef STM32F10X_CL +/** + * @brief Configures the PREDIV2 division factor. + * @note + * - This function must be used only when both PLL2 and PLL3 are disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. + * This parameter can be RCC_PREDIV2_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV2[3:0] bits */ + tmpreg &= ~CFGR2_PREDIV2; + /* Set the PREDIV2 division factor */ + tmpreg |= RCC_PREDIV2_Div; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + +/** + * @brief Configures the PLL2 multiplication factor. + * @note + * - This function must be used only when the PLL2 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. + * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL2Config(uint32_t RCC_PLL2Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL2Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL2MUL; + /* Set the PLL2 configuration bits */ + tmpreg |= RCC_PLL2Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL2. + * @note + * - The PLL2 can not be disabled if it is used indirectly as system clock + * (i.e. it is used as PLL clock entry that is used as System clock). + * - This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL2Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; +} + + +/** + * @brief Configures the PLL3 multiplication factor. + * @note + * - This function must be used only when the PLL3 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. + * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL3Config(uint32_t RCC_PLL3Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL3Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL3MUL; + /* Set the PLL3 configuration bits */ + tmpreg |= RCC_PLL3Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL3. + * @note This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL3Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the system clock (SYSCLK). + * @param RCC_SYSCLKSource: specifies the clock source used as system clock. + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + tmpreg = RCC->CFGR; + /* Clear SW[1:0] bits */ + tmpreg &= CFGR_SW_Mask; + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can + * be one of the following: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + tmpreg = RCC->CFGR; + /* Clear HPRE[3:0] bits */ + tmpreg &= CFGR_HPRE_Reset_Mask; + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the Low Speed APB clock (PCLK1). + * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB1 clock = HCLK + * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE1[2:0] bits */ + tmpreg &= CFGR_PPRE1_Reset_Mask; + /* Set PPRE1[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the High Speed APB clock (PCLK2). + * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB2 clock = HCLK + * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE2[2:0] bits */ + tmpreg &= CFGR_PPRE2_Reset_Mask; + /* Set PPRE2[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK << 3; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the specified RCC interrupts. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +#ifndef STM32F10X_CL +/** + * @brief Configures the USB clock (USBCLK). + * @param RCC_USBCLKSource: specifies the USB clock source. This clock is + * derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB + * clock source + * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source + * @retval None + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); + + *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; +} +#else +/** + * @brief Configures the USB OTG FS clock (OTGFSCLK). + * This function applies only to STM32 Connectivity line devices. + * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. + * This clock is derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @retval None + */ +void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); + + *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the ADC clock (ADCCLK). + * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from + * the APB2 clock (PCLK2). + * This parameter can be one of the following values: + * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 + * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 + * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 + * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 + * @retval None + */ +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); + tmpreg = RCC->CFGR; + /* Clear ADCPRE[1:0] bits */ + tmpreg &= CFGR_ADCPRE_Reset_Mask; + /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ + tmpreg |= RCC_PCLK2; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +#ifdef STM32F10X_CL +/** + * @brief Configures the I2S2 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S2 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry + * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry + * @retval None + */ +void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; +} + +/** + * @brief Configures the I2S3 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S3 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry + * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry + * @retval None + */ +void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: LSE oscillator OFF + * @arg RCC_LSE_ON: LSE oscillator ON + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Reset LSEBYP bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ + switch(RCC_LSE) + { + case RCC_LSE_ON: + /* Set LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; + break; + + case RCC_LSE_Bypass: + /* Set LSEBYP and LSEON bits */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + + default: + break; + } +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + /* Select the RTC clock source */ + RCC->BDCR |= RCC_RTCCLKSource; +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; +} + +/** + * @brief Returns the frequencies of different on chip clocks. + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * @note The result of this function could be not correct when using + * fractional value for HSE crystal. + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & CFGR_SWS_Mask; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & CFGR_PLLMull_Mask; + pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; + } + else + { + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; + RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + + /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ + /* Get HCLK prescaler */ + tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + /* Get PCLK1 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get PCLK2 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; + tmp = tmp >> 11; + presc = APBAHBPrescTable[tmp]; + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get ADCCLK prescaler */ + tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; + tmp = tmp >> 14; + presc = ADCPrescTable[tmp]; + /* ADCCLK clock frequency */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; +} + +/** + * @brief Enables or disables the AHB peripheral clock. + * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @arg RCC_AHBPeriph_ETH_MAC_Tx + * @arg RCC_AHBPeriph_ETH_MAC_Rx + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_FSMC + * @arg RCC_AHBPeriph_SDIO + * + * @note SRAM and FLITF clock can be disabled only during sleep mode. + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBENR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +#ifdef STM32F10X_CL +/** + * @brief Forces or releases AHB peripheral reset. + * @note This function applies only to STM32 Connectivity line devices. + * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBRSTR |= RCC_AHBPeriph; + } + else + { + RCC->AHBRSTR &= ~RCC_AHBPeriph; + } +} +#endif /* STM32F10X_CL */ + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases the Backup domain reset. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Clock Security System. + * @param NewState: new state of the Clock Security System.. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; +} + +/** + * @brief Selects the clock source to output on MCO pin. + * @param RCC_MCO: specifies the clock source to output. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * @arg RCC_MCO_PLL2CLK: PLL2 clock selected + * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected + * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected + * @arg RCC_MCO_PLL3CLK: PLL3 clock selected + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCO) +{ + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCO)); + + /* Perform Byte access to MCO bits to select the MCO source */ + *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + if (tmp == 1) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 2) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_Mask; + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= CSR_RMVF_Set; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c new file mode 100644 index 00000000..f798d2bd --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c @@ -0,0 +1,339 @@ +/** + ****************************************************************************** + * @file stm32f10x_rtc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RTC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rtc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RTC + * @brief RTC driver modules + * @{ + */ + +/** @defgroup RTC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup RTC_Private_Defines + * @{ + */ +#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */ +#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Functions + * @{ + */ + +/** + * @brief Enables or disables the specified RTC interrupts. + * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @param NewState: new state of the specified RTC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_IT(RTC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RTC->CRH |= RTC_IT; + } + else + { + RTC->CRH &= (uint16_t)~RTC_IT; + } +} + +/** + * @brief Enters the RTC configuration mode. + * @param None + * @retval None + */ +void RTC_EnterConfigMode(void) +{ + /* Set the CNF flag to enter in the Configuration Mode */ + RTC->CRL |= RTC_CRL_CNF; +} + +/** + * @brief Exits from the RTC configuration mode. + * @param None + * @retval None + */ +void RTC_ExitConfigMode(void) +{ + /* Reset the CNF flag to exit from the Configuration Mode */ + RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF); +} + +/** + * @brief Gets the RTC counter value. + * @param None + * @retval RTC counter value. + */ +uint32_t RTC_GetCounter(void) +{ + uint16_t tmp = 0; + tmp = RTC->CNTL; + return (((uint32_t)RTC->CNTH << 16 ) | tmp) ; +} + +/** + * @brief Sets the RTC counter value. + * @param CounterValue: RTC counter new value. + * @retval None + */ +void RTC_SetCounter(uint32_t CounterValue) +{ + RTC_EnterConfigMode(); + /* Set RTC COUNTER MSB word */ + RTC->CNTH = CounterValue >> 16; + /* Set RTC COUNTER LSB word */ + RTC->CNTL = (CounterValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Sets the RTC prescaler value. + * @param PrescalerValue: RTC prescaler new value. + * @retval None + */ +void RTC_SetPrescaler(uint32_t PrescalerValue) +{ + /* Check the parameters */ + assert_param(IS_RTC_PRESCALER(PrescalerValue)); + + RTC_EnterConfigMode(); + /* Set RTC PRESCALER MSB word */ + RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16; + /* Set RTC PRESCALER LSB word */ + RTC->PRLL = (PrescalerValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Sets the RTC alarm value. + * @param AlarmValue: RTC alarm new value. + * @retval None + */ +void RTC_SetAlarm(uint32_t AlarmValue) +{ + RTC_EnterConfigMode(); + /* Set the ALARM MSB word */ + RTC->ALRH = AlarmValue >> 16; + /* Set the ALARM LSB word */ + RTC->ALRL = (AlarmValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Gets the RTC divider value. + * @param None + * @retval RTC Divider value. + */ +uint32_t RTC_GetDivider(void) +{ + uint32_t tmp = 0x00; + tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16; + tmp |= RTC->DIVL; + return tmp; +} + +/** + * @brief Waits until last write operation on RTC registers has finished. + * @note This function must be called before any write to RTC registers. + * @param None + * @retval None + */ +void RTC_WaitForLastTask(void) +{ + /* Loop until RTOFF flag is set */ + while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET) + { + } +} + +/** + * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) + * are synchronized with RTC APB clock. + * @note This function must be called before any read operation after an APB reset + * or an APB clock stop. + * @param None + * @retval None + */ +void RTC_WaitForSynchro(void) +{ + /* Clear RSF flag */ + RTC->CRL &= (uint16_t)~RTC_FLAG_RSF; + /* Loop until RSF flag is set */ + while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET) + { + } +} + +/** + * @brief Checks whether the specified RTC flag is set or not. + * @param RTC_FLAG: specifies the flag to check. + * This parameter can be one the following values: + * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @arg RTC_FLAG_OW: Overflow flag + * @arg RTC_FLAG_ALR: Alarm flag + * @arg RTC_FLAG_SEC: Second flag + * @retval The new state of RTC_FLAG (SET or RESET). + */ +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); + + if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's pending flags. + * @param RTC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after + * an APB reset or an APB Clock stop. + * @arg RTC_FLAG_OW: Overflow flag + * @arg RTC_FLAG_ALR: Alarm flag + * @arg RTC_FLAG_SEC: Second flag + * @retval None + */ +void RTC_ClearFlag(uint16_t RTC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); + + /* Clear the corresponding RTC flag */ + RTC->CRL &= (uint16_t)~RTC_FLAG; +} + +/** + * @brief Checks whether the specified RTC interrupt has occurred or not. + * @param RTC_IT: specifies the RTC interrupts sources to check. + * This parameter can be one of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @retval The new state of the RTC_IT (SET or RESET). + */ +ITStatus RTC_GetITStatus(uint16_t RTC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RTC_GET_IT(RTC_IT)); + + bitstatus = (ITStatus)(RTC->CRL & RTC_IT); + if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's interrupt pending bits. + * @param RTC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @retval None + */ +void RTC_ClearITPendingBit(uint16_t RTC_IT) +{ + /* Check the parameters */ + assert_param(IS_RTC_IT(RTC_IT)); + + /* Clear the corresponding RTC pending bit */ + RTC->CRL &= (uint16_t)~RTC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c new file mode 100644 index 00000000..d1870cef --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c @@ -0,0 +1,799 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SDIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_sdio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SDIO + * @brief SDIO driver modules + * @{ + */ + +/** @defgroup SDIO_Private_TypesDefinitions + * @{ + */ + +/* ------------ SDIO registers bit address in the alias region ----------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ + +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) +#define CLKEN_BitNumber 0x08 +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) + +/* --- CMD Register ---*/ + +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0C) +#define SDIOSUSPEND_BitNumber 0x0B +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BitNumber 0x0C +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) + +/* Alias word address of NIEN bit */ +#define NIEN_BitNumber 0x0D +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BitNumber 0x0E +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) + +/* --- DCTRL Register ---*/ + +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) +#define DMAEN_BitNumber 0x03 +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BitNumber 0x08 +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BitNumber 0x09 +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BitNumber 0x0A +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BitNumber 0x0B +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) + +/* ---------------------- SDIO registers bit mask ------------------------ */ + +/* --- CLKCR Register ---*/ + +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) + +/* --- PWRCTRL Register ---*/ + +/* SDIO PWRCTRL Mask */ +#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) + +/* --- DCTRL Register ---*/ + +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) + +/* --- CMD Register ---*/ + +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) + +/* SDIO RESP Registers Address */ +#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) + +/** + * @} + */ + +/** @defgroup SDIO_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SDIO peripheral registers to their default reset values. + * @param None + * @retval None + */ +void SDIO_DeInit(void) +{ + SDIO->POWER = 0x00000000; + SDIO->CLKCR = 0x00000000; + SDIO->ARG = 0x00000000; + SDIO->CMD = 0x00000000; + SDIO->DTIMER = 0x00000000; + SDIO->DLEN = 0x00000000; + SDIO->DCTRL = 0x00000000; + SDIO->ICR = 0x00C007FF; + SDIO->MASK = 0x00000000; +} + +/** + * @brief Initializes the SDIO peripheral according to the specified + * parameters in the SDIO_InitStruct. + * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure + * that contains the configuration information for the SDIO peripheral. + * @retval None + */ +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); + +/*---------------------------- SDIO CLKCR Configuration ------------------------*/ + /* Get the SDIO CLKCR value */ + tmpreg = SDIO->CLKCR; + + /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ + tmpreg &= CLKCR_CLEAR_MASK; + + /* Set CLKDIV bits according to SDIO_ClockDiv value */ + /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ + /* Set BYPASS bit according to SDIO_ClockBypass value */ + /* Set WIDBUS bits according to SDIO_BusWide value */ + /* Set NEGEDGE bits according to SDIO_ClockEdge value */ + /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ + tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | + SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | + SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); + + /* Write to SDIO CLKCR */ + SDIO->CLKCR = tmpreg; +} + +/** + * @brief Fills each SDIO_InitStruct member with its default value. + * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) +{ + /* SDIO_InitStruct members default value */ + SDIO_InitStruct->SDIO_ClockDiv = 0x00; + SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; + SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; + SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; + SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; + SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; +} + +/** + * @brief Enables or disables the SDIO Clock. + * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ClockCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState; +} + +/** + * @brief Sets the power status of the controller. + * @param SDIO_PowerState: new state of the Power state. + * This parameter can be one of the following values: + * @arg SDIO_PowerState_OFF + * @arg SDIO_PowerState_ON + * @retval None + */ +void SDIO_SetPowerState(uint32_t SDIO_PowerState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); + + SDIO->POWER &= PWR_PWRCTRL_MASK; + SDIO->POWER |= SDIO_PowerState; +} + +/** + * @brief Gets the power status of the controller. + * @param None + * @retval Power status of the controller. The returned value can + * be one of the following: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDIO_GetPowerState(void) +{ + return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); +} + +/** + * @brief Enables or disables the SDIO interrupts. + * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @param NewState: new state of the specified SDIO interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_IT(SDIO_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the SDIO interrupts */ + SDIO->MASK |= SDIO_IT; + } + else + { + /* Disable the SDIO interrupts */ + SDIO->MASK &= ~SDIO_IT; + } +} + +/** + * @brief Enables or disables the SDIO DMA request. + * @param NewState: new state of the selected SDIO DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_DMACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState; +} + +/** + * @brief Initializes the SDIO Command according to the specified + * parameters in the SDIO_CmdInitStruct and send the command. + * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef + * structure that contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); + assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); + assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); + assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); + +/*---------------------------- SDIO ARG Configuration ------------------------*/ + /* Set the SDIO Argument value */ + SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; + +/*---------------------------- SDIO CMD Configuration ------------------------*/ + /* Get the SDIO CMD value */ + tmpreg = SDIO->CMD; + /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ + tmpreg &= CMD_CLEAR_MASK; + /* Set CMDINDEX bits according to SDIO_CmdIndex value */ + /* Set WAITRESP bits according to SDIO_Response value */ + /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ + /* Set CPSMEN bits according to SDIO_CPSM value */ + tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response + | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; + + /* Write to SDIO CMD */ + SDIO->CMD = tmpreg; +} + +/** + * @brief Fills each SDIO_CmdInitStruct member with its default value. + * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef + * structure which will be initialized. + * @retval None + */ +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) +{ + /* SDIO_CmdInitStruct members default value */ + SDIO_CmdInitStruct->SDIO_Argument = 0x00; + SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; + SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; + SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; + SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; +} + +/** + * @brief Returns command index of last command for which response received. + * @param None + * @retval Returns the command index of the last command response received. + */ +uint8_t SDIO_GetCommandResponse(void) +{ + return (uint8_t)(SDIO->RESPCMD); +} + +/** + * @brief Returns response received from the card for the last command. + * @param SDIO_RESP: Specifies the SDIO response register. + * This parameter can be one of the following values: + * @arg SDIO_RESP1: Response Register 1 + * @arg SDIO_RESP2: Response Register 2 + * @arg SDIO_RESP3: Response Register 3 + * @arg SDIO_RESP4: Response Register 4 + * @retval The Corresponding response register value. + */ +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_RESP(SDIO_RESP)); + + tmp = SDIO_RESP_ADDR + SDIO_RESP; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Initializes the SDIO data path according to the specified + * parameters in the SDIO_DataInitStruct. + * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that + * contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); + assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); + assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); + assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); + assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); + +/*---------------------------- SDIO DTIMER Configuration ---------------------*/ + /* Set the SDIO Data TimeOut value */ + SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; + +/*---------------------------- SDIO DLEN Configuration -----------------------*/ + /* Set the SDIO DataLength value */ + SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; + +/*---------------------------- SDIO DCTRL Configuration ----------------------*/ + /* Get the SDIO DCTRL value */ + tmpreg = SDIO->DCTRL; + /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ + tmpreg &= DCTRL_CLEAR_MASK; + /* Set DEN bit according to SDIO_DPSM value */ + /* Set DTMODE bit according to SDIO_TransferMode value */ + /* Set DTDIR bit according to SDIO_TransferDir value */ + /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ + tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir + | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; + + /* Write to SDIO DCTRL */ + SDIO->DCTRL = tmpreg; +} + +/** + * @brief Fills each SDIO_DataInitStruct member with its default value. + * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + /* SDIO_DataInitStruct members default value */ + SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; + SDIO_DataInitStruct->SDIO_DataLength = 0x00; + SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; + SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; + SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; + SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param None + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDIO_GetDataCounter(void) +{ + return SDIO->DCOUNT; +} + +/** + * @brief Read one data word from Rx FIFO. + * @param None + * @retval Data received + */ +uint32_t SDIO_ReadData(void) +{ + return SDIO->FIFO; +} + +/** + * @brief Write one data word to Tx FIFO. + * @param Data: 32-bit data word to write. + * @retval None + */ +void SDIO_WriteData(uint32_t Data) +{ + SDIO->FIFO = Data; +} + +/** + * @brief Returns the number of words left to be written to or read from FIFO. + * @param None + * @retval Remaining number of words. + */ +uint32_t SDIO_GetFIFOCount(void) +{ + return SDIO->FIFOCNT; +} + +/** + * @brief Starts the SD I/O Read Wait operation. + * @param NewState: new state of the Start SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StartSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState; +} + +/** + * @brief Stops the SD I/O Read Wait operation. + * @param NewState: new state of the Stop SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StopSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState; +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. + * This parameter can be: + * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK + * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 + * @retval None + */ +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); + + *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; +} + +/** + * @brief Enables or disables the SD I/O Mode Operation. + * @param NewState: new state of SDIO specific operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SetSDIOOperation(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the SD I/O Mode suspend command sending. + * @param NewState: new state of the SD I/O Mode suspend command. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the command completion signal. + * @param NewState: new state of command completion signal. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CommandCompletionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the CE-ATA interrupt. + * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CEATAITCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1)); +} + +/** + * @brief Sends CE-ATA command (CMD61). + * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendCEATACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState; +} + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param SDIO_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide + * bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_FLAG(SDIO_FLAG)); + + if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's pending flags. + * @param SDIO_FLAG: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide + * bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearFlag(uint32_t SDIO_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); + + SDIO->ICR = SDIO_FLAG; +} + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param SDIO_IT: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_GET_IT(SDIO_IT)); + if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param SDIO_IT: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearITPendingBit(uint32_t SDIO_IT) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); + + SDIO->ICR = SDIO_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c new file mode 100644 index 00000000..51a9cce7 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c @@ -0,0 +1,908 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SPI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_spi.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +/** @defgroup SPI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup SPI_Private_Defines + * @{ + */ + +/* SPI SPE mask */ +#define CR1_SPE_Set ((uint16_t)0x0040) +#define CR1_SPE_Reset ((uint16_t)0xFFBF) + +/* I2S I2SE mask */ +#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) +#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) + +/* SPI CRCNext mask */ +#define CR1_CRCNext_Set ((uint16_t)0x1000) + +/* SPI CRCEN mask */ +#define CR1_CRCEN_Set ((uint16_t)0x2000) +#define CR1_CRCEN_Reset ((uint16_t)0xDFFF) + +/* SPI SSOE mask */ +#define CR2_SSOE_Set ((uint16_t)0x0004) +#define CR2_SSOE_Reset ((uint16_t)0xFFFB) + +/* SPI registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0x3040) +#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) + +/* SPI or I2S mode selection masks */ +#define SPI_Mode_Select ((uint16_t)0xF7FF) +#define I2S_Mode_Select ((uint16_t)0x0800) + +/* I2S clock source selection masks */ +#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) +#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) +#define I2S_MUL_MASK ((uint32_t)(0x0000F000)) +#define I2S_DIV_MASK ((uint32_t)(0x000000F0)) + +/** + * @} + */ + +/** @defgroup SPI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SPIx peripheral registers to their default + * reset values (Affects also the I2Ss). + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + if (SPIx == SPI1) + { + /* Enable SPI1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + /* Release SPI1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else if (SPIx == SPI2) + { + /* Enable SPI2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Release SPI2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } + else + { + if (SPIx == SPI3) + { + /* Enable SPI3 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); + /* Release SPI3 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); + } + } +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * @retval None + */ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + /* check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Check the SPI parameters */ + assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); + assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); + assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); + assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); + assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); + assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); + assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); + +/*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler + master/salve mode, CPOL and CPHA */ + /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ + /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ + /* Set LSBFirst bit according to SPI_FirstBit value */ + /* Set BR bits according to SPI_BaudRatePrescaler value */ + /* Set CPOL bit according to SPI_CPOL value */ + /* Set CPHA bit according to SPI_CPHA value */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | + SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | + SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | + SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + SPIx->I2SCFGR &= SPI_Mode_Select; + +/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ + /* Write to SPIx CRCPOLY */ + SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral + * (configured in I2S mode). + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * @note + * The function calculates the optimal prescaler needed to obtain the most + * accurate audio frequency (depending on the I2S clock source, the PLL values + * and the product configuration). But in case the prescaler value is greater + * than 511, the default value (0x02) will be configured instead. * + * @retval None + */ +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0; + RCC_ClocksTypeDef RCC_Clocks; + uint32_t sourceclock = 0; + + /* Check the I2S parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; + SPIx->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = SPIx->I2SCFGR; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) */ + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* Get the I2S clock source mask depending on the peripheral number */ + if(((uint32_t)SPIx) == SPI2_BASE) + { + /* The mask is relative to I2S2 */ + tmp = I2S2_CLOCK_SRC; + } + else + { + /* The mask is relative to I2S3 */ + tmp = I2S3_CLOCK_SRC; + } + + /* Check the I2S clock source configuration depending on the Device: + Only Connectivity line devices have the PLL3 VCO clock */ +#ifdef STM32F10X_CL + if((RCC->CFGR2 & tmp) != 0) + { + /* Get the configuration bits of RCC PLL3 multiplier */ + tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12); + + /* Get the value of the PLL3 multiplier */ + if((tmp > 5) && (tmp < 15)) + { + /* Multiplier is between 8 and 14 (value 15 is forbidden) */ + tmp += 2; + } + else + { + if (tmp == 15) + { + /* Multiplier is 20 */ + tmp = 20; + } + } + /* Get the PREDIV2 value */ + sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1); + + /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */ + sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); + } + else + { + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; + } +#else /* STM32F10X_HD */ + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; +#endif /* STM32F10X_CL */ + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + /* Remove the floating point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /* Write to SPIx I2SPR register the computed value */ + SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + SPIx->I2SCFGR = tmpreg; +} + +/** + * @brief Fills each SPI_InitStruct member with its default value. + * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized. + * @retval None + */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) +{ +/*--------------- Reset SPI init structure parameters values -----------------*/ + /* Initialize the SPI_Direction member */ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + /* initialize the SPI_Mode member */ + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + /* initialize the SPI_DataSize member */ + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + /* Initialize the SPI_CPOL member */ + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + /* Initialize the SPI_CPHA member */ + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + /* Initialize the SPI_NSS member */ + SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; + /* Initialize the SPI_BaudRatePrescaler member */ + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + /* Initialize the SPI_FirstBit member */ + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + /* Initialize the SPI_CRCPolynomial member */ + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/** + * @brief Fills each I2S_InitStruct member with its default value. + * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) +{ +/*--------------- Reset I2S init structure parameters values -----------------*/ + /* Initialize the I2S_Mode member */ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + + /* Initialize the I2S_Standard member */ + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + + /* Initialize the I2S_DataFormat member */ + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + + /* Initialize the I2S_MCLKOutput member */ + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + + /* Initialize the I2S_AudioFreq member */ + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + + /* Initialize the I2S_CPOL member */ + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/** + * @brief Enables or disables the specified SPI peripheral. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral */ + SPIx->CR1 |= CR1_SPE_Set; + } + else + { + /* Disable the selected SPI peripheral */ + SPIx->CR1 &= CR1_SPE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; + } + else + { + /* Disable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI/I2S interrupts. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask + * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask + * @arg SPI_I2S_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified SPI/I2S interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0 ; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = (uint16_t)1 << (uint16_t)itpos; + + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S interrupt */ + SPIx->CR2 |= itmask; + } + else + { + /* Disable the selected SPI/I2S interrupt */ + SPIx->CR2 &= (uint16_t)~itmask; + } +} + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request + * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request + * @param NewState: new state of the selected SPI/I2S DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S DMA requests */ + SPIx->CR2 |= SPI_I2S_DMAReq; + } + else + { + /* Disable the selected SPI/I2S DMA requests */ + SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param Data : Data to be transmitted. + * @retval None + */ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Write in the DR register the data to be sent */ + SPIx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @retval The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the data in the DR register */ + return SPIx->DR; +} + +/** + * @brief Configures internally by software the NSS pin for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. + * This parameter can be one of the following values: + * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally + * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally + * @retval None + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); + if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + /* Set NSS pin internally by software */ + SPIx->CR1 |= SPI_NSSInternalSoft_Set; + } + else + { + /* Reset NSS pin internally by software */ + SPIx->CR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/** + * @brief Enables or disables the SS output for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx SS output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI SS output */ + SPIx->CR2 |= CR2_SSOE_Set; + } + else + { + /* Disable the selected SPI SS output */ + SPIx->CR2 &= CR2_SSOE_Reset; + } +} + +/** + * @brief Configures the data size for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_DataSize: specifies the SPI data size. + * This parameter can be one of the following values: + * @arg SPI_DataSize_16b: Set data frame format to 16bit + * @arg SPI_DataSize_8b: Set data frame format to 8bit + * @retval None + */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DATASIZE(SPI_DataSize)); + /* Clear DFF bit */ + SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; + /* Set new DFF bit value */ + SPIx->CR1 |= SPI_DataSize; +} + +/** + * @brief Transmit the SPIx CRC value. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_TransmitCRC(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Enable the selected SPI CRC transmission */ + SPIx->CR1 |= CR1_CRCNext_Set; +} + +/** + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx CRC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI CRC calculation */ + SPIx->CR1 |= CR1_CRCEN_Set; + } + else + { + /* Disable the selected SPI CRC calculation */ + SPIx->CR1 &= CR1_CRCEN_Reset; + } +} + +/** + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_CRC: specifies the CRC register to be read. + * This parameter can be one of the following values: + * @arg SPI_CRC_Tx: Selects Tx CRC register + * @arg SPI_CRC_Rx: Selects Rx CRC register + * @retval The selected CRC register value.. + */ +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC(SPI_CRC)); + if (SPI_CRC != SPI_CRC_Rx) + { + /* Get the Tx CRC register */ + crcreg = SPIx->TXCRCR; + } + else + { + /* Get the Rx CRC register */ + crcreg = SPIx->RXCRCR; + } + /* Return the selected CRC register */ + return crcreg; +} + +/** + * @brief Returns the CRC Polynomial register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the CRC polynomial register */ + return SPIx->CRCPR; +} + +/** + * @brief Selects the data transfer direction in bi-directional mode for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_Direction: specifies the data transfer direction in bi-directional mode. + * This parameter can be one of the following values: + * @arg SPI_Direction_Tx: Selects Tx transmission direction + * @arg SPI_Direction_Rx: Selects Rx receive direction + * @retval None + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DIRECTION(SPI_Direction)); + if (SPI_Direction == SPI_Direction_Tx) + { + /* Set the Tx only mode */ + SPIx->CR1 |= SPI_Direction_Tx; + } + else + { + /* Set the Rx only mode */ + SPIx->CR1 &= SPI_Direction_Rx; + } +} + +/** + * @brief Checks whether the specified SPI/I2S flag is set or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. + * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. + * @arg SPI_I2S_FLAG_BSY: Busy flag. + * @arg SPI_I2S_FLAG_OVR: Overrun flag. + * @arg SPI_FLAG_MODF: Mode Fault flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * @arg I2S_FLAG_UDR: Underrun Error flag. + * @arg I2S_FLAG_CHSIDE: Channel Side flag. + * @retval The new state of SPI_I2S_FLAG (SET or RESET). + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); + /* Check the status of the specified SPI/I2S flag */ + if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + /* SPI_I2S_FLAG is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_FLAG is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_FLAG: specifies the SPI flag to clear. + * This function clears only CRCERR flag. + * @note + * - OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). + * - UDR (UnderRun error) flag is cleared by a read operation to + * SPI_SR register (SPI_I2S_GetFlagStatus()). + * - MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a + * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). + * @retval None + */ +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); + + /* Clear the selected SPI CRC Error (CRCERR) flag */ + SPIx->SR = (uint16_t)~SPI_I2S_FLAG; +} + +/** + * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. + * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. + * @arg SPI_I2S_IT_OVR: Overrun interrupt. + * @arg SPI_IT_MODF: Mode Fault interrupt. + * @arg SPI_IT_CRCERR: CRC Error interrupt. + * @arg I2S_IT_UDR: Underrun Error interrupt. + * @retval The new state of SPI_I2S_IT (SET or RESET). + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Get the SPI/I2S IT mask */ + itmask = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = 0x01 << itmask; + + /* Get the SPI_I2S_IT enable bit status */ + enablestatus = (SPIx->CR2 & itmask) ; + + /* Check the status of the specified SPI/I2S interrupt */ + if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) + { + /* SPI_I2S_IT is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_IT is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_IT status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. + * This function clears only CRCERR interrupt pending bit. + * @note + * - OVR (OverRun Error) interrupt pending bit is cleared by software + * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) + * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - UDR (UnderRun Error) interrupt pending bit is cleared by a read + * operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: + * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) + * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable + * the SPI). + * @retval None + */ +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + uint16_t itpos = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); + + /* Get the SPI IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ + SPIx->SR = (uint16_t)~itpos; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c new file mode 100644 index 00000000..81c8484e --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c @@ -0,0 +1,2890 @@ +/** + ****************************************************************************** + * @file stm32f10x_tim.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the TIM firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_tim.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup TIM + * @brief TIM driver modules + * @{ + */ + +/** @defgroup TIM_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Defines + * @{ + */ + +/* ---------------------- TIM registers bit mask ------------------------ */ +#define SMCR_ETR_Mask ((uint16_t)0x00FF) +#define CCMR_Offset ((uint16_t)0x0018) +#define CCER_CCE_Set ((uint16_t)0x0001) +#define CCER_CCNE_Set ((uint16_t)0x0004) + +/** + * @} + */ + +/** @defgroup TIM_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_FunctionPrototypes + * @{ + */ + +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +/** + * @} + */ + +/** @defgroup TIM_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the TIMx peripheral registers to their default reset values. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval None + */ +void TIM_DeInit(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + if (TIMx == TIM1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); + } + else if (TIMx == TIM2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); + } + else if (TIMx == TIM3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); + } + else if (TIMx == TIM4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); + } + else if (TIMx == TIM5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); + } + else if (TIMx == TIM6) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); + } + else if (TIMx == TIM7) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); + } + else if (TIMx == TIM8) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); + } + else if (TIMx == TIM9) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); + } + else if (TIMx == TIM10) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); + } + else if (TIMx == TIM11) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); + } + else if (TIMx == TIM12) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); + } + else if (TIMx == TIM13) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); + } + else if (TIMx == TIM14) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); + } + else if (TIMx == TIM15) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); + } + else if (TIMx == TIM16) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); + } + else + { + if (TIMx == TIM17) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); + } + } +} + +/** + * @brief Initializes the TIMx Time Base Unit peripheral according to + * the specified parameters in the TIM_TimeBaseInitStruct. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef + * structure that contains the configuration information for the + * specified TIM peripheral. + * @retval None + */ +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); + assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); + + tmpcr1 = TIMx->CR1; + + if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)|| + (TIMx == TIM4) || (TIMx == TIM5)) + { + /* Select the Counter Mode */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; + } + + if((TIMx != TIM6) && (TIMx != TIM7)) + { + /* Set the clock division */ + tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; + } + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; + + /* Set the Prescaler value */ + TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; + + if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler and the Repetition counter + values immediately */ + TIMx->EGR = TIM_PSCReloadMode_Immediate; +} + +/** + * @brief Initializes the TIMx Channel1 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E); + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P)); + /* Set the Output Compare Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; + + /* Set the Output State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputState; + + if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| + (TIMx == TIM16)|| (TIMx == TIM17)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP)); + /* Set the Output N Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE)); + /* Set the Output N State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputNState; + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N)); + + /* Set the Output Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel2 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE)); + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N)); + + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel3 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S)); + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE)); + + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel4 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + /* Reset the Output Compare IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); + assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); + } + else + { + assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity)); + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) + { + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI3 Configuration */ + TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI4 Configuration */ + TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Configures the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct to measure an external PWM signal. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + uint16_t icoppositepolarity = TIM_ICPolarity_Rising; + uint16_t icoppositeselection = TIM_ICSelection_DirectTI; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Select the Opposite Input Polarity */ + if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) + { + icoppositepolarity = TIM_ICPolarity_Falling; + } + else + { + icoppositepolarity = TIM_ICPolarity_Rising; + } + /* Select the Opposite Input */ + if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) + { + icoppositeselection = TIM_ICSelection_IndirectTI; + } + else + { + icoppositeselection = TIM_ICSelection_DirectTI; + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI2 Configuration */ + TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI1 Configuration */ + TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Configures the: Break feature, dead time, Lock level, the OSSI, + * the OSSR State and the AOE(automatic output enable). + * @param TIMx: where x can be 1 or 8 to select the TIM + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @retval None + */ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); + assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); + assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); + assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); + assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); + /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | + TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | + TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | + TIM_BDTRInitStruct->TIM_AutomaticOutput; +} + +/** + * @brief Fills each TIM_TimeBaseInitStruct member with its default value. + * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef + * structure which will be initialized. + * @retval None + */ +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + /* Set the default configuration */ + TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; + TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; + TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; + TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; +} + +/** + * @brief Fills each TIM_OCInitStruct member with its default value. + * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + /* Set the default configuration */ + TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; + TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStruct->TIM_Pulse = 0x0000; + TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; +} + +/** + * @brief Fills each TIM_ICInitStruct member with its default value. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; + TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; + TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; + TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; + TIM_ICInitStruct->TIM_ICFilter = 0x00; +} + +/** + * @brief Fills each TIM_BDTRInitStruct member with its default value. + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which + * will be initialized. + * @retval None + */ +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; + TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; + TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; + TIM_BDTRInitStruct->TIM_DeadTime = 0x00; + TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; + TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; + TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; +} + +/** + * @brief Enables or disables the specified TIM peripheral. + * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. + * @param NewState: new state of the TIMx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TIM Counter */ + TIMx->CR1 |= TIM_CR1_CEN; + } + else + { + /* Disable the TIM Counter */ + TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN)); + } +} + +/** + * @brief Enables or disables the TIM peripheral Main Outputs. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral. + * @param NewState: new state of the TIM peripheral Main Outputs. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TIM Main Output */ + TIMx->BDTR |= TIM_BDTR_MOE; + } + else + { + /* Disable the TIM Main Output */ + TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE)); + } +} + +/** + * @brief Enables or disables the specified TIM interrupts. + * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. + * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can only generate an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @param NewState: new state of the TIM interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Interrupt sources */ + TIMx->DIER |= TIM_IT; + } + else + { + /* Disable the Interrupt sources */ + TIMx->DIER &= (uint16_t)~TIM_IT; + } +} + +/** + * @brief Configures the TIMx event to be generate by software. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_EventSource: specifies the event source. + * This parameter can be one or more of the following values: + * @arg TIM_EventSource_Update: Timer update Event source + * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EventSource_COM: Timer COM event source + * @arg TIM_EventSource_Trigger: Timer Trigger Event source + * @arg TIM_EventSource_Break: Timer Break event source + * @note + * - TIM6 and TIM7 can only generate an update event. + * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. + * @retval None + */ +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); + + /* Set the event sources */ + TIMx->EGR = TIM_EventSource; +} + +/** + * @brief Configures the TIMx's DMA interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select + * the TIM peripheral. + * @param TIM_DMABase: DMA Base address. + * This parameter can be one of the following values: + * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, + * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, + * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, + * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, + * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, + * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, + * TIM_DMABase_DCR. + * @param TIM_DMABurstLength: DMA Burst length. + * This parameter can be one value between: + * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. + * @retval None + */ +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); + assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); + /* Set the DMA Base and the DMA Burst Length */ + TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; +} + +/** + * @brief Enables or disables the TIMx's DMA Requests. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17 + * to select the TIM peripheral. + * @param TIM_DMASource: specifies the DMA Request sources. + * This parameter can be any combination of the following values: + * @arg TIM_DMA_Update: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_Trigger: TIM Trigger DMA source + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST9_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA sources */ + TIMx->DIER |= TIM_DMASource; + } + else + { + /* Disable the DMA sources */ + TIMx->DIER &= (uint16_t)~TIM_DMASource; + } +} + +/** + * @brief Configures the TIMx internal Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 + * to select the TIM peripheral. + * @retval None + */ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Disable slave mode to clock the prescaler directly with the internal clock */ + TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); +} + +/** + * @brief Configures the TIMx Internal Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ITRSource: Trigger source. + * This parameter can be one of the following values: + * @param TIM_TS_ITR0: Internal Trigger 0 + * @param TIM_TS_ITR1: Internal Trigger 1 + * @param TIM_TS_ITR2: Internal Trigger 2 + * @param TIM_TS_ITR3: Internal Trigger 3 + * @retval None + */ +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Select the Internal Trigger */ + TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the TIMx Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_TIxExternalCLKSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector + * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 + * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 + * @param TIM_ICPolarity: specifies the TIx Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param ICFilter : specifies the filter value. + * This parameter must be a value between 0x0 and 0xF. + * @retval None + */ +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); + assert_param(IS_TIM_IC_FILTER(ICFilter)); + /* Configure the Timer Input Clock Source */ + if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) + { + TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + else + { + TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + /* Select the Trigger source */ + TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the External clock Mode1 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the SMS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + /* Select the External clock mode1 */ + tmpsmcr |= TIM_SlaveMode_External1; + /* Select the Trigger selection : ETRF */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + tmpsmcr |= TIM_TS_ETRF; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the External clock Mode2 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + /* Enable the External clock mode2 */ + TIMx->SMCR |= TIM_SMCR_ECE; +} + +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + tmpsmcr = TIMx->SMCR; + /* Reset the ETR Bits */ + tmpsmcr &= SMCR_ETR_Mask; + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the TIMx Prescaler. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Prescaler: specifies the Prescaler Register value + * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode + * This parameter can be one of the following values: + * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. + * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately. + * @retval None + */ +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); + /* Set the Prescaler value */ + TIMx->PSC = Prescaler; + /* Set or reset the UG Bit */ + TIMx->EGR = TIM_PSCReloadMode; +} + +/** + * @brief Specifies the TIMx Counter Mode to be used. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_CounterMode: specifies the Counter Mode to be used + * This parameter can be one of the following values: + * @arg TIM_CounterMode_Up: TIM Up Counting Mode + * @arg TIM_CounterMode_Down: TIM Down Counting Mode + * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 + * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 + * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 + * @retval None + */ +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) +{ + uint16_t tmpcr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); + tmpcr1 = TIMx->CR1; + /* Reset the CMS and DIR Bits */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + /* Set the Counter Mode */ + tmpcr1 |= TIM_CounterMode; + /* Write to TIMx CR1 register */ + TIMx->CR1 = tmpcr1; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_InputTriggerSource: The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + /* Set the Input Trigger source */ + tmpsmcr |= TIM_InputTriggerSource; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the TIMx Encoder Interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. + * This parameter can be one of the following values: + * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. + * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. + * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending + * on the level of the other input. + * @param TIM_IC1Polarity: specifies the IC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @param TIM_IC2Polarity: specifies the IC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @retval None + */ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) +{ + uint16_t tmpsmcr = 0; + uint16_t tmpccmr1 = 0; + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Set the encoder Mode */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + tmpsmcr |= TIM_EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S))); + tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P))); + tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Forces the TIMx output 1 waveform to active or inactive level. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC1REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. + * @retval None + */ +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M); + /* Configure The Forced output Mode */ + tmpccmr1 |= TIM_ForcedAction; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 2 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC2REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. + * @retval None + */ +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M); + /* Configure The Forced output Mode */ + tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 3 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC3REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. + * @retval None + */ +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC1M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M); + /* Configure The Forced output Mode */ + tmpccmr2 |= TIM_ForcedAction; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Forces the TIMx output 4 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC4REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. + * @retval None + */ +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC2M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M); + /* Configure The Forced output Mode */ + tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables TIMx peripheral Preload register on ARR. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param NewState: new state of the TIMx peripheral Preload register + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ARR Preload Bit */ + TIMx->CR1 |= TIM_CR1_ARPE; + } + else + { + /* Reset the ARR Preload Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE); + } +} + +/** + * @brief Selects the TIM peripheral Commutation event. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral + * @param NewState: new state of the Commutation event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the COM Bit */ + TIMx->CR2 |= TIM_CR2_CCUS; + } + else + { + /* Reset the COM Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS); + } +} + +/** + * @brief Selects the TIMx peripheral Capture Compare DMA source. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select + * the TIM peripheral. + * @param NewState: new state of the Capture Compare DMA source + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCDS Bit */ + TIMx->CR2 |= TIM_CR2_CCDS; + } + else + { + /* Reset the CCDS Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS); + } +} + +/** + * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15 + * to select the TIMx peripheral + * @param NewState: new state of the Capture Compare Preload Control bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCPC Bit */ + TIMx->CR2 |= TIM_CR2_CCPC; + } + else + { + /* Reset the CCPC Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC); + } +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR1. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= TIM_OCPreload; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR2. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR3. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= TIM_OCPreload; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR4. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 1 Fast feature. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= TIM_OCFast; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 2 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 3 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= TIM_OCFast; + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 4 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF1 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= TIM_OCClear; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF2 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF3 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= TIM_OCClear; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF4 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx channel 1 polarity. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC1P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P); + tmpccer |= TIM_OCPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 1N polarity. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC1N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC1NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP); + tmpccer |= TIM_OCNPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 2 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC2P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 2N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC2N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC2NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 3 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC3 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC3P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 3N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC3N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC3NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 4 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC4 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC4P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 12); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. + * @retval None + */ +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCX(TIM_CCx)); + + tmp = CCER_CCE_Set << TIM_Channel; + + /* Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t)~ tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. + * @retval None + */ +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCXN(TIM_CCxN)); + + tmp = CCER_CCNE_Set << TIM_Channel; + + /* Reset the CCxNE Bit */ + TIMx->CCER &= (uint16_t) ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); +} + +/** + * @brief Selects the TIM Output Compare Mode. + * @note This function disables the selected channel before changing the Output + * Compare Mode. + * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_OCMode: specifies the TIM Output Compare Mode. + * This parameter can be one of the following values: + * @arg TIM_OCMode_Timing + * @arg TIM_OCMode_Active + * @arg TIM_OCMode_Toggle + * @arg TIM_OCMode_PWM1 + * @arg TIM_OCMode_PWM2 + * @arg TIM_ForcedAction_Active + * @arg TIM_ForcedAction_InActive + * @retval None + */ +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) +{ + uint32_t tmp = 0; + uint16_t tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_OCM(TIM_OCMode)); + + tmp = (uint32_t) TIMx; + tmp += CCMR_Offset; + + tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel; + + /* Disable the Channel: Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t) ~tmp1; + + if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) + { + tmp += (TIM_Channel>>1); + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= TIM_OCMode; + } + else + { + tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); + } +} + +/** + * @brief Enables or Disables the TIMx Update event. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param NewState: new state of the TIMx UDIS bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the Update Disable Bit */ + TIMx->CR1 |= TIM_CR1_UDIS; + } + else + { + /* Reset the Update Disable Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS); + } +} + +/** + * @brief Configures the TIMx Update Request Interrupt source. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_UpdateSource: specifies the Update source. + * This parameter can be one of the following values: + * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. + * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow. + * @retval None + */ +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); + if (TIM_UpdateSource != TIM_UpdateSource_Global) + { + /* Set the URS Bit */ + TIMx->CR1 |= TIM_CR1_URS; + } + else + { + /* Reset the URS Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS); + } +} + +/** + * @brief Enables or disables the TIMx's Hall sensor interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param NewState: new state of the TIMx Hall sensor interface. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the TI1S Bit */ + TIMx->CR2 |= TIM_CR2_TI1S; + } + else + { + /* Reset the TI1S Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S); + } +} + +/** + * @brief Selects the TIMx's One Pulse Mode. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_OPMode: specifies the OPM Mode to be used. + * This parameter can be one of the following values: + * @arg TIM_OPMode_Single + * @arg TIM_OPMode_Repetitive + * @retval None + */ +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); + /* Reset the OPM Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM); + /* Configure the OPM Mode */ + TIMx->CR1 |= TIM_OPMode; +} + +/** + * @brief Selects the TIMx Trigger Output Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_TRGOSource: specifies the Trigger Output source. + * This paramter can be one of the following values: + * + * - For all TIMx + * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO). + * + * - For all TIMx except TIM6 and TIM7 + * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag + * is to be set, as soon as a capture or compare match occurs (TRGO). + * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO). + * + * @retval None + */ +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST7_PERIPH(TIMx)); + assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); + /* Reset the MMS Bits */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS); + /* Select the TRGO source */ + TIMx->CR2 |= TIM_TRGOSource; +} + +/** + * @brief Selects the TIMx Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_SlaveMode: specifies the Timer Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes + * the counter and triggers an update of the registers. + * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high. + * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI. + * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter. + * @retval None + */ +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); + /* Reset the SMS Bits */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS); + /* Select the Slave Mode */ + TIMx->SMCR |= TIM_SlaveMode; +} + +/** + * @brief Sets or Resets the TIMx Master/Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer + * and its slaves (through TRGO). + * @arg TIM_MasterSlaveMode_Disable: No action + * @retval None + */ +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); + /* Reset the MSM Bit */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM); + + /* Set or Reset the MSM Bit */ + TIMx->SMCR |= TIM_MasterSlaveMode; +} + +/** + * @brief Sets the TIMx Counter Register value + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Counter: specifies the Counter register new value. + * @retval None + */ +void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Set the Counter Register value */ + TIMx->CNT = Counter; +} + +/** + * @brief Sets the TIMx Autoreload Register value + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Autoreload: specifies the Autoreload register new value. + * @retval None + */ +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Set the Autoreload Register value */ + TIMx->ARR = Autoreload; +} + +/** + * @brief Sets the TIMx Capture Compare1 Register value + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param Compare1: specifies the Capture Compare1 register new value. + * @retval None + */ +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* Set the Capture Compare1 Register value */ + TIMx->CCR1 = Compare1; +} + +/** + * @brief Sets the TIMx Capture Compare2 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param Compare2: specifies the Capture Compare2 register new value. + * @retval None + */ +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Set the Capture Compare2 Register value */ + TIMx->CCR2 = Compare2; +} + +/** + * @brief Sets the TIMx Capture Compare3 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare3: specifies the Capture Compare3 register new value. + * @retval None + */ +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Set the Capture Compare3 Register value */ + TIMx->CCR3 = Compare3; +} + +/** + * @brief Sets the TIMx Capture Compare4 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare4: specifies the Capture Compare4 register new value. + * @retval None + */ +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Set the Capture Compare4 Register value */ + TIMx->CCR4 = Compare4; +} + +/** + * @brief Sets the TIMx Input Capture 1 prescaler. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC1PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC); + /* Set the IC1PSC value */ + TIMx->CCMR1 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 2 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC2PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC); + /* Set the IC2PSC value */ + TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Input Capture 3 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC3PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC); + /* Set the IC3PSC value */ + TIMx->CCMR2 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 4 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC4PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC); + /* Set the IC4PSC value */ + TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Clock Division value. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select + * the TIM peripheral. + * @param TIM_CKD: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CKD_DIV1: TDTS = Tck_tim + * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim + * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim + * @retval None + */ +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CKD_DIV(TIM_CKD)); + /* Reset the CKD Bits */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD); + /* Set the CKD value */ + TIMx->CR1 |= TIM_CKD; +} + +/** + * @brief Gets the TIMx Input Capture 1 value. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @retval Capture Compare 1 Register value. + */ +uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* Get the Capture 1 Register value */ + return TIMx->CCR1; +} + +/** + * @brief Gets the TIMx Input Capture 2 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @retval Capture Compare 2 Register value. + */ +uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Get the Capture 2 Register value */ + return TIMx->CCR2; +} + +/** + * @brief Gets the TIMx Input Capture 3 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 3 Register value. + */ +uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Get the Capture 3 Register value */ + return TIMx->CCR3; +} + +/** + * @brief Gets the TIMx Input Capture 4 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 4 Register value. + */ +uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Get the Capture 4 Register value */ + return TIMx->CCR4; +} + +/** + * @brief Gets the TIMx Counter value. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval Counter Register value. + */ +uint16_t TIM_GetCounter(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Get the Counter Register value */ + return TIMx->CNT; +} + +/** + * @brief Gets the TIMx Prescaler value. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval Prescaler Register value. + */ +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Get the Prescaler Register value */ + return TIMx->PSC; +} + +/** + * @brief Checks whether the specified TIM flag is set or not. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * @note + * - TIM6 and TIM7 can have only one update flag. + * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, + * TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval The new state of TIM_FLAG (SET or RESET). + */ +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); + + if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's pending flags. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * @note + * - TIM6 and TIM7 can have only one update flag. + * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, + * TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval None + */ +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG)); + + /* Clear the flags */ + TIMx->SR = (uint16_t)~TIM_FLAG; +} + +/** + * @brief Checks whether the TIM interrupt has occurred or not. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_IT: specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can generate only an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval The new state of the TIM_IT(SET or RESET). + */ +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itstatus = 0x0, itenable = 0x0; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_IT(TIM_IT)); + + itstatus = TIMx->SR & TIM_IT; + + itenable = TIMx->DIER & TIM_IT; + if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's interrupt pending bits. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_IT: specifies the pending bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM1 update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can generate only an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval None + */ +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + /* Clear the IT pending Bit */ + TIMx->SR = (uint16_t)~TIM_IT; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0; + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F))); + tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + } + else + { + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + } + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 4); + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F))); + tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); + tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); + } + else + { + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E); + } + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 8); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); + } + else + { + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E); + } + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 12); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); + tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); + } + else + { + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E); + } + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c new file mode 100644 index 00000000..a3f16f15 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c @@ -0,0 +1,1058 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the USART firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_usart.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +/** @defgroup USART_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Defines + * @{ + */ + +#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */ +#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */ + +#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */ + +#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */ +#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */ +#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */ +#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */ +#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */ + +#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */ +#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */ + +#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */ +#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */ +#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */ + +#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */ +#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */ + +#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */ +#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */ + +#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */ +#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */ + +#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */ +#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */ + +#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */ +#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */ +#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */ +#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */ +#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */ + +/* USART OverSampling-8 Mask */ +#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */ +#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */ + +/* USART One Bit Sampling Mask */ +#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */ +#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */ + +/** + * @} + */ + +/** @defgroup USART_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the USARTx peripheral registers to their default reset values. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_DeInit(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + if (USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if (USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if (USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if (USARTx == UART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); + } + else + { + if (USARTx == UART5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); + } + } +} + +/** + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct . + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * that contains the configuration information for the specified USART + * peripheral. + * @retval None + */ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) +{ + uint32_t tmpreg = 0x00, apbclock = 0x00; + uint32_t integerdivider = 0x00; + uint32_t fractionaldivider = 0x00; + uint32_t usartxbase = 0; + RCC_ClocksTypeDef RCC_ClocksStatus; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); + assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); + assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); + assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); + assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); + assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); + /* The hardware flow control is available only for USART1, USART2 and USART3 */ + if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear STOP[13:12] bits */ + tmpreg &= CR2_STOP_CLEAR_Mask; + /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ + /* Set STOP[13:12] bits according to USART_StopBits value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; + +/*---------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = USARTx->CR1; + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure the USART Word Length, Parity and mode ----------------------- */ + /* Set the M bits according to USART_WordLength value */ + /* Set PCE and PS bits according to USART_Parity value */ + /* Set TE and RE bits according to USART_Mode value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + /* Write to USART CR1 */ + USARTx->CR1 = (uint16_t)tmpreg; + +/*---------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = USARTx->CR3; + /* Clear CTSE and RTSE bits */ + tmpreg &= CR3_CLEAR_Mask; + /* Configure the USART HFC -------------------------------------------------*/ + /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + /* Write to USART CR3 */ + USARTx->CR3 = (uint16_t)tmpreg; + +/*---------------------------- USART BRR Configuration -----------------------*/ + /* Configure the USART Baud Rate -------------------------------------------*/ + RCC_GetClocksFreq(&RCC_ClocksStatus); + if (usartxbase == USART1_BASE) + { + apbclock = RCC_ClocksStatus.PCLK2_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK1_Frequency; + } + + /* Determine the integer part */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + /* Integer part computing in case Oversampling mode is 8 Samples */ + integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + /* Integer part computing in case Oversampling mode is 16 Samples */ + integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); + } + tmpreg = (integerdivider / 100) << 4; + + /* Determine the fractional part */ + fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); + + /* Implement the fractional part in the register */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); + } + + /* Write to USART BRR */ + USARTx->BRR = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_InitStruct member with its default value. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * which will be initialized. + * @retval None + */ +void USART_StructInit(USART_InitTypeDef* USART_InitStruct) +{ + /* USART_InitStruct members default value */ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No ; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/** + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct . + * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure that contains the configuration information for the specified + * USART peripheral. + * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. + * @retval None + */ +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); + assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); + assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); + assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear CLKEN, CPOL, CPHA and LBCL bits */ + tmpreg &= CR2_CLOCK_CLEAR_Mask; + /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ + /* Set CLKEN bit according to USART_Clock value */ + /* Set CPOL bit according to USART_CPOL value */ + /* Set CPHA bit according to USART_CPHA value */ + /* Set LBCL bit according to USART_LastBit value */ + tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_ClockInitStruct member with its default value. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure which will be initialized. + * @retval None + */ +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + /* USART_ClockInitStruct members default value */ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/** + * @brief Enables or disables the specified USART peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USARTx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART by setting the UE bit in the CR1 register */ + USARTx->CR1 |= CR1_UE_Set; + } + else + { + /* Disable the selected USART by clearing the UE bit in the CR1 register */ + USARTx->CR1 &= CR1_UE_Reset; + } +} + +/** + * @brief Enables or disables the specified USART interrupts. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @param NewState: new state of the specified USARTx interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; + uint32_t usartxbase = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CONFIG_IT(USART_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + + /* Get the interrupt position */ + itpos = USART_IT & IT_Mask; + itmask = (((uint32_t)0x01) << itpos); + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + usartxbase += 0x0C; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + usartxbase += 0x10; + } + else /* The IT is in CR3 register */ + { + usartxbase += 0x14; + } + if (NewState != DISABLE) + { + *(__IO uint32_t*)usartxbase |= itmask; + } + else + { + *(__IO uint32_t*)usartxbase &= ~itmask; + } +} + +/** + * @brief Enables or disables the USART’s DMA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_DMAReq: specifies the DMA request. + * This parameter can be any combination of the following values: + * @arg USART_DMAReq_Tx: USART DMA transmit request + * @arg USART_DMAReq_Rx: USART DMA receive request + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @note The DMA mode is not available for UART5 except in the STM32 + * High density value line devices(STM32F10X_HD_VL). + * @retval None + */ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAREQ(USART_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the DMA transfer for selected requests by setting the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 |= USART_DMAReq; + } + else + { + /* Disable the DMA transfer for selected requests by clearing the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 &= (uint16_t)~USART_DMAReq; + } +} + +/** + * @brief Sets the address of the USART node. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Address: Indicates the address of the USART node. + * @retval None + */ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_ADDRESS(USART_Address)); + + /* Clear the USART address */ + USARTx->CR2 &= CR2_Address_Mask; + /* Set the USART address node */ + USARTx->CR2 |= USART_Address; +} + +/** + * @brief Selects the USART WakeUp method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_WakeUp: specifies the USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection + * @arg USART_WakeUp_AddressMark: WakeUp by an address mark + * @retval None + */ +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_WAKEUP(USART_WakeUp)); + + USARTx->CR1 &= CR1_WAKE_Mask; + USARTx->CR1 |= USART_WakeUp; +} + +/** + * @brief Determines if the USART is in mute mode or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART mute mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + USARTx->CR1 |= CR1_RWU_Set; + } + else + { + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + USARTx->CR1 &= CR1_RWU_Reset; + } +} + +/** + * @brief Sets the USART LIN Break detection length. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_LINBreakDetectLength: specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg USART_LINBreakDetectLength_10b: 10-bit break detection + * @arg USART_LINBreakDetectLength_11b: 11-bit break detection + * @retval None + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); + + USARTx->CR2 &= CR2_LBDL_Mask; + USARTx->CR2 |= USART_LINBreakDetectLength; +} + +/** + * @brief Enables or disables the USART’s LIN mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART LIN mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + USARTx->CR2 |= CR2_LINEN_Set; + } + else + { + /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ + USARTx->CR2 &= CR2_LINEN_Reset; + } +} + +/** + * @brief Transmits single data through the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param Data: the data to transmit. + * @retval None + */ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DATA(Data)); + + /* Transmit Data */ + USARTx->DR = (Data & (uint16_t)0x01FF); +} + +/** + * @brief Returns the most recent received data by the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Receive Data */ + return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); +} + +/** + * @brief Transmits break characters. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_SendBreak(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Send break characters */ + USARTx->CR1 |= CR1_SBK_Set; +} + +/** + * @brief Sets the specified USART guard time. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param USART_GuardTime: specifies the guard time. + * @note The guard time bits are not available for UART4 and UART5. + * @retval None + */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the USART Guard time */ + USARTx->GTPR &= GTPR_LSB_Mask; + /* Set the USART guard time */ + USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/** + * @brief Sets the system clock prescaler. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Prescaler: specifies the prescaler clock. + * @note The function is used for IrDA mode with UART4 and UART5. + * @retval None + */ +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Clear the USART prescaler */ + USARTx->GTPR &= GTPR_MSB_Mask; + /* Set the USART prescaler */ + USARTx->GTPR |= USART_Prescaler; +} + +/** + * @brief Enables or disables the USART’s Smart Card mode. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the Smart Card mode. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + USARTx->CR3 |= CR3_SCEN_Set; + } + else + { + /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ + USARTx->CR3 &= CR3_SCEN_Reset; + } +} + +/** + * @brief Enables or disables NACK transmission. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the NACK transmission. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ + USARTx->CR3 |= CR3_NACK_Set; + } + else + { + /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ + USARTx->CR3 &= CR3_NACK_Reset; + } +} + +/** + * @brief Enables or disables the USART’s Half Duplex communication. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART Communication. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + USARTx->CR3 |= CR3_HDSEL_Set; + } + else + { + /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ + USARTx->CR3 &= CR3_HDSEL_Reset; + } +} + + +/** + * @brief Enables or disables the USART's 8x oversampling mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @note + * This function has to be called before calling USART_Init() + * function in order to have correct baudrate Divider value. + * @retval None + */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ + USARTx->CR1 |= CR1_OVER8_Set; + } + else + { + /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ + USARTx->CR1 &= CR1_OVER8_Reset; + } +} + +/** + * @brief Enables or disables the USART's one bit sampling method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ + USARTx->CR3 |= CR3_ONEBITE_Set; + } + else + { + /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */ + USARTx->CR3 &= CR3_ONEBITE_Reset; + } +} + +/** + * @brief Configures the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IrDAMode: specifies the IrDA mode. + * This parameter can be one of the following values: + * @arg USART_IrDAMode_LowPower + * @arg USART_IrDAMode_Normal + * @retval None + */ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); + + USARTx->CR3 &= CR3_IRLP_Mask; + USARTx->CR3 |= USART_IrDAMode; +} + +/** + * @brief Enables or disables the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the IrDA mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + USARTx->CR3 |= CR3_IREN_Set; + } + else + { + /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ + USARTx->CR3 &= CR3_IREN_Reset; + } +} + +/** + * @brief Checks whether the specified USART flag is set or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg USART_FLAG_LBD: LIN Break detection flag + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of USART_FLAG (SET or RESET). + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if (USART_FLAG == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the USARTx's pending flags. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg USART_FLAG_LBD: LIN Break detection flag. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) + * followed by a read operation to USART_DR register (USART_ReceiveData()). + * - RXNE flag can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC flag can be also cleared by software sequence: a read operation to + * USART_SR register (USART_GetFlagStatus()) followed by a write operation + * to USART_DR register (USART_SendData()). + * - TXE flag is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + USARTx->SR = (uint16_t)~USART_FLAG; +} + +/** + * @brief Checks whether the specified USART interrupt has occurred or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Tansmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE: OverRun Error interrupt + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of USART_IT (SET or RESET). + */ +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_GET_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + /* Get the interrupt position */ + itmask = USART_IT & IT_Mask; + itmask = (uint32_t)0x01 << itmask; + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + itmask &= USARTx->CR1; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + itmask &= USARTx->CR2; + } + else /* The IT is in CR3 register */ + { + itmask &= USARTx->CR3; + } + + bitpos = USART_IT >> 0x08; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->SR; + if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/** + * @brief Clears the USARTx's interrupt pending bits. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) pending bits are cleared by + * software sequence: a read operation to USART_SR register + * (USART_GetITStatus()) followed by a read operation to USART_DR register + * (USART_ReceiveData()). + * - RXNE pending bit can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC pending bit can be also cleared by software sequence: a read + * operation to USART_SR register (USART_GetITStatus()) followed by a write + * operation to USART_DR register (USART_SendData()). + * - TXE pending bit is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint16_t bitpos = 0x00, itmask = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + bitpos = USART_IT >> 0x08; + itmask = ((uint16_t)0x01 << (uint16_t)bitpos); + USARTx->SR = (uint16_t)~itmask; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c new file mode 100644 index 00000000..77a7ce51 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c @@ -0,0 +1,224 @@ +/** + ****************************************************************************** + * @file stm32f10x_wwdg.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the WWDG firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_wwdg.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup WWDG + * @brief WWDG driver modules + * @{ + */ + +/** @defgroup WWDG_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Defines + * @{ + */ + +/* ----------- WWDG registers bit address in the alias region ----------- */ +#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) + +/* Alias word address of EWI bit */ +#define CFR_OFFSET (WWDG_OFFSET + 0x04) +#define EWI_BitNumber 0x09 +#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) + +/* --------------------- WWDG registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_WDGA_Set ((uint32_t)0x00000080) + +/* CFR register bit mask */ +#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F) +#define CFR_W_Mask ((uint32_t)0xFFFFFF80) +#define BIT_Mask ((uint8_t)0x7F) + +/** + * @} + */ + +/** @defgroup WWDG_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the WWDG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void WWDG_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); +} + +/** + * @brief Sets the WWDG Prescaler. + * @param WWDG_Prescaler: specifies the WWDG Prescaler. + * This parameter can be one of the following values: + * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 + * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 + * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 + * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 + * @retval None + */ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); + /* Clear WDGTB[1:0] bits */ + tmpreg = WWDG->CFR & CFR_WDGTB_Mask; + /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ + tmpreg |= WWDG_Prescaler; + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Sets the WWDG window value. + * @param WindowValue: specifies the window value to be compared to the downcounter. + * This parameter value must be lower than 0x80. + * @retval None + */ +void WWDG_SetWindowValue(uint8_t WindowValue) +{ + __IO uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); + /* Clear W[6:0] bits */ + + tmpreg = WWDG->CFR & CFR_W_Mask; + + /* Set W[6:0] bits according to WindowValue value */ + tmpreg |= WindowValue & (uint32_t) BIT_Mask; + + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Enables the WWDG Early Wakeup interrupt(EWI). + * @param None + * @retval None + */ +void WWDG_EnableIT(void) +{ + *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE; +} + +/** + * @brief Sets the WWDG counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F. + * @retval None + */ +void WWDG_SetCounter(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + /* Write to T[6:0] bits to configure the counter value, no need to do + a read-modify-write; writing a 0 to WDGA bit does nothing */ + WWDG->CR = Counter & BIT_Mask; +} + +/** + * @brief Enables WWDG and load the counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F. + * @retval None + */ +void WWDG_Enable(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + WWDG->CR = CR_WDGA_Set | Counter; +} + +/** + * @brief Checks whether the Early Wakeup interrupt flag is set or not. + * @param None + * @retval The new state of the Early Wakeup interrupt flag (SET or RESET) + */ +FlagStatus WWDG_GetFlagStatus(void) +{ + return (FlagStatus)(WWDG->SR); +} + +/** + * @brief Clears Early Wakeup interrupt flag. + * @param None + * @retval None + */ +void WWDG_ClearFlag(void) +{ + WWDG->SR = (uint32_t)RESET; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/stm32f10x_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/stm32f10x_conf.h new file mode 100644 index 00000000..59549e3b --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/lib/stdperiphlib/stm32f10x_conf.h @@ -0,0 +1,77 @@ +/** + ****************************************************************************** + * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_conf.h + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CONF_H +#define __STM32F10x_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ +#include "stm32f10x_adc.h" +#include "stm32f10x_bkp.h" +#include "stm32f10x_can.h" +#include "stm32f10x_cec.h" +#include "stm32f10x_crc.h" +#include "stm32f10x_dac.h" +#include "stm32f10x_dbgmcu.h" +#include "stm32f10x_dma.h" +#include "stm32f10x_exti.h" +#include "stm32f10x_flash.h" +#include "stm32f10x_fsmc.h" +#include "stm32f10x_gpio.h" +#include "stm32f10x_i2c.h" +#include "stm32f10x_iwdg.h" +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" +#include "stm32f10x_rtc.h" +#include "stm32f10x_sdio.h" +#include "stm32f10x_spi.h" +#include "stm32f10x_tim.h" +#include "stm32f10x_usart.h" +#include "stm32f10x_wwdg.h" +#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function which reports + * the name of the source file and the source line number of the call + * that failed. If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F10x_CONF_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/main.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/main.c new file mode 100644 index 00000000..377d3435 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/main.c @@ -0,0 +1,152 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\main.c +* \brief Demo program application source file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "header.h" /* generic header */ + + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +static void Init(void); + + +/************************************************************************************//** +** \brief This is the entry point for the bootloader application and is called +** by the reset interrupt vector after the C-startup routines executed. +** \return Program return code. +** +****************************************************************************************/ +int main(void) +{ + /* initialize the microcontroller */ + Init(); + /* initialize the bootloader interface */ + BootComInit(); + + /* start the infinite program loop */ + while (1) + { + /* toggle LED with a fixed frequency */ + LedToggle(); + /* check for bootloader activation request */ + BootComCheckActivationRequest(); + } + + /* program should never get here */ + return 0; +} /*** end of main ***/ + + +/************************************************************************************//** +** \brief Initializes the microcontroller. +** \return none. +** +****************************************************************************************/ +static void Init(void) +{ + volatile unsigned long StartUpCounter = 0, HSEStatus = 0; + unsigned long pll_multiplier; + + /* reset the RCC clock configuration to the default reset state (for debug purpose) */ + /* set HSION bit */ + RCC->CR |= (unsigned long)0x00000001; + /* reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ + RCC->CFGR &= (unsigned long)0xF8FF0000; + /* reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (unsigned long)0xFEF6FFFF; + /* reset HSEBYP bit */ + RCC->CR &= (unsigned long)0xFFFBFFFF; + /* reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (unsigned long)0xFF80FFFF; + /* disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + /* enable HSE */ + RCC->CR |= ((unsigned long)RCC_CR_HSEON); + /* wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } + while((HSEStatus == 0) && (StartUpCounter != 1500)); + /* check if time out was reached */ + if ((RCC->CR & RCC_CR_HSERDY) == RESET) + { + /* cannot continue when HSE is not ready */ + while (1) { ; } + } + /* enable flash prefetch buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + /* reset flash wait state configuration to default 0 wait states */ + FLASH->ACR &= (unsigned long)((unsigned long)~FLASH_ACR_LATENCY); +#if (BOOT_CPU_SYSTEM_SPEED_KHZ > 48000) + /* configure 2 flash wait states */ + FLASH->ACR |= (unsigned long)FLASH_ACR_LATENCY_2; +#elif (BOOT_CPU_SYSTEM_SPEED_KHZ > 24000) + /* configure 1 flash wait states */ + FLASH->ACR |= (unsigned long)FLASH_ACR_LATENCY_1; +#endif + /* HCLK = SYSCLK */ + RCC->CFGR |= (unsigned long)RCC_CFGR_HPRE_DIV1; + /* PCLK2 = HCLK/2 */ + RCC->CFGR |= (unsigned long)RCC_CFGR_PPRE2_DIV2; + /* PCLK1 = HCLK/2 */ + RCC->CFGR |= (unsigned long)RCC_CFGR_PPRE1_DIV2; + /* reset PLL configuration */ + RCC->CFGR &= (unsigned long)((unsigned long)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | \ + RCC_CFGR_PLLMULL)); + /* calculate multiplier value */ + pll_multiplier = BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ; + /* convert to register value */ + pll_multiplier = (unsigned long)((pll_multiplier - 2) << 18); + /* set the PLL multiplier and clock source */ + RCC->CFGR |= (unsigned long)(RCC_CFGR_PLLSRC_HSE | pll_multiplier); + /* enable PLL */ + RCC->CR |= RCC_CR_PLLON; + /* wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + /* select PLL as system clock source */ + RCC->CFGR &= (unsigned long)((unsigned long)~(RCC_CFGR_SW)); + RCC->CFGR |= (unsigned long)RCC_CFGR_SW_PLL; + /* wait till PLL is used as system clock source */ + while ((RCC->CFGR & (unsigned long)RCC_CFGR_SWS) != (unsigned long)0x08) + { + } + /* init the led driver */ + LedInit(); + /* init the timer driver */ + TimerInit(); +} /*** end of Init ***/ + + +/*********************************** end of main.c *************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/prog.dox b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/prog.dox new file mode 100644 index 00000000..daee5757 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/prog.dox @@ -0,0 +1,16 @@ +/** +\defgroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio User Program +\ingroup ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +\brief User Program. +\details The intention of the demo user program is two-fold. (1) To test the + bootloader, you need some sort of firmware to see if you can perform a + firmware update with the bootloader. This program can be used for this + purpose. (2) To make firmware programmable by the bootloader, a few + adjustments to the firmware are required. The demo user program serves as an + example for how these adjustments can be implemented. Additional details on + this subject can be found in the port specifics documentation, which is + available at: + https://www.feaser.com/openblt/doku.php?id=manual:ports:armcm3_stm32. +*/ + + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/startup_stm32f10x_md.s b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/startup_stm32f10x_md.s new file mode 100644 index 00000000..a81add65 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/startup_stm32f10x_md.s @@ -0,0 +1,371 @@ +/** + ****************************************************************************** + * @file startup_stm32f10x_md.s + * @author MCD Application Team + * @version V3.6.1 + * @date 09-March-2012 + * @brief STM32F10x Medium Density Devices vector table for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Atollic update: set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_IRQHandler + .word RTC_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_2_IRQHandler + .word USB_HP_CAN1_TX_IRQHandler + .word USB_LP_CAN1_RX0_IRQHandler + .word CAN1_RX1_IRQHandler + .word CAN1_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_IRQHandler + .word TIM1_UP_IRQHandler + .word TIM1_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTCAlarm_IRQHandler + .word USBWakeUp_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for STM32F10x Medium Density devices. */ + .word 0x55AAEE11 /* Reserved for OpenBLT checksum */ + + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_IRQHandler + .thumb_set TAMPER_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_2_IRQHandler + .thumb_set ADC1_2_IRQHandler,Default_Handler + + .weak USB_HP_CAN1_TX_IRQHandler + .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler + + .weak USB_LP_CAN1_RX0_IRQHandler + .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTCAlarm_IRQHandler + .thumb_set RTCAlarm_IRQHandler,Default_Handler + + .weak USBWakeUp_IRQHandler + .thumb_set USBWakeUp_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/stm32_flash.ld b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/stm32_flash.ld new file mode 100644 index 00000000..ff1f7786 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/stm32_flash.ld @@ -0,0 +1,178 @@ +/* +****************************************************************************** +File: stm32_flash.ld +Info: Generated by Atollic TrueSTUDIO(R) 9.0.1 2018-06-06 + +Abstract: Linker script for STM32F103RB device + Set heap size, stack size, stack location, memory areas and + sections according to application requirements. + +The MIT License (MIT) +Copyright (c) 2018 STMicroelectronics + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20005000; /* end of 20K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x800; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08006000, LENGTH = 128K-24K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.c b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.c new file mode 100644 index 00000000..b2d1ab00 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.c @@ -0,0 +1,106 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\timer.c +* \brief Timer driver source file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ + +/**************************************************************************************** +* Include files +****************************************************************************************/ +#include "header.h" /* generic header */ + + +/**************************************************************************************** +* Local data declarations +****************************************************************************************/ +/** \brief Local variable for storing the number of milliseconds that have elapsed since + * startup. + */ +static unsigned long millisecond_counter; + + +/************************************************************************************//** +** \brief Initializes the timer. +** \return none. +** +****************************************************************************************/ +void TimerInit(void) +{ + /* configure the SysTick timer for 1 ms period */ + SysTick_Config(BOOT_CPU_SYSTEM_SPEED_KHZ); + /* reset the millisecond counter */ + TimerSet(0); +} /*** end of TimerInit ***/ + + +/************************************************************************************//** +** \brief Stops the timer. +** \return none. +** +****************************************************************************************/ +void TimerDeinit(void) +{ + SysTick->CTRL = 0; +} /*** end of TimerDeinit ***/ + + +/************************************************************************************//** +** \brief Sets the initial counter value of the millisecond timer. +** \param timer_value initialize value of the millisecond timer. +** \return none. +** +****************************************************************************************/ +void TimerSet(unsigned long timer_value) +{ + /* set the millisecond counter */ + millisecond_counter = timer_value; +} /*** end of TimerSet ***/ + + +/************************************************************************************//** +** \brief Obtains the counter value of the millisecond timer. +** \return Current value of the millisecond timer. +** +****************************************************************************************/ +unsigned long TimerGet(void) +{ + /* read and return the millisecond counter value */ + return millisecond_counter; +} /*** end of TimerGet ***/ + + +/************************************************************************************//** +** \brief Interrupt service routine of the timer. +** \return none. +** +****************************************************************************************/ +void SysTick_Handler(void) +{ + /* increment the millisecond counter */ + millisecond_counter++; +} /*** end of SysTick_Handler ***/ + + +/*********************************** end of timer.c ************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.h new file mode 100644 index 00000000..48ba6444 --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Prog/timer.h @@ -0,0 +1,40 @@ +/************************************************************************************//** +* \file Demo\ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio\Prog\timer.h +* \brief Timer driver header file. +* \ingroup Prog_ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio +* \internal +*---------------------------------------------------------------------------------------- +* C O P Y R I G H T +*---------------------------------------------------------------------------------------- +* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved +* +*---------------------------------------------------------------------------------------- +* L I C E N S E +*---------------------------------------------------------------------------------------- +* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or +* modify it under the terms of the GNU General Public License as published by the Free +* Software Foundation, either version 3 of the License, or (at your option) any later +* version. +* +* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR +* PURPOSE. See the GNU General Public License for more details. +* +* You have received a copy of the GNU General Public License along with OpenBLT. It +* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. +* +* \endinternal +****************************************************************************************/ +#ifndef TIMER_H +#define TIMER_H + +/**************************************************************************************** +* Function prototypes +****************************************************************************************/ +void TimerInit(void); +void TimerDeinit(void); +void TimerSet(unsigned long timer_value); +unsigned long TimerGet(void); + +#endif /* TIMER_H */ +/*********************************** end of timer.h ************************************/ diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/demo.dox b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/demo.dox new file mode 100644 index 00000000..5b6f307e --- /dev/null +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/demo.dox @@ -0,0 +1,9 @@ +/** +\defgroup ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio Demo for Olimex STM32-P103/TrueStudio +\ingroup Demos +\brief Preconfigured programs for the Olimex STM32-P103 and the Atollic TrueStudio toolchain. +\details For detailed getting started instructions, refer to: + https://www.feaser.com/openblt/doku.php?id=manual:demos:olimex_stm32p103_truestudio. +*/ + +