diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.cproject b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.cproject
new file mode 100644
index 00000000..42bc567b
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.cproject
@@ -0,0 +1,137 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.project b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.project
new file mode 100644
index 00000000..71958740
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.project
@@ -0,0 +1,59 @@
+
+
+ Boot
+
+
+
+
+
+ org.eclipse.cdt.managedbuilder.core.genmakebuilder
+ clean,full,incremental,
+
+
+
+
+ org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder
+ full,incremental,
+
+
+
+
+
+ org.eclipse.cdt.core.cnature
+ org.eclipse.cdt.managedbuilder.core.managedBuildNature
+ org.eclipse.cdt.managedbuilder.core.ScannerConfigNature
+
+
+
+ core
+ 2
+ OPENBLT_ROOT
+
+
+
+
+ 1521194271444
+ core
+ 9
+
+ org.eclipse.ui.ide.multiFilter
+ 1.0-name-matches-false-false-ARMCM4_STM32F3
+
+
+
+ 1521194285444
+ core/ARMCM4_STM32F3
+ 9
+
+ org.eclipse.ui.ide.multiFilter
+ 1.0-name-matches-false-false-GCC
+
+
+
+
+
+ OPENBLT_ROOT
+ $%7BPARENT-3-PROJECT_LOC%7D/Source
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs
new file mode 100644
index 00000000..8a85c903
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/com.atollic.truestudio.debug.hardware_device.prefs
@@ -0,0 +1,11 @@
+BOARD=None
+CODE_LOCATION=FLASH
+ENDIAN=Little-endian
+MCU=STM32F303VC
+MCU_VENDOR=STMicroelectronics
+MODEL=Pro
+PROBE=ST-LINK
+PROJECT_FORMAT_VERSION=2
+TARGET=STM32
+VERSION=9.0.0
+eclipse.preferences.version=1
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/language.settings.xml b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/language.settings.xml
new file mode 100644
index 00000000..5662239f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/language.settings.xml
@@ -0,0 +1,13 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.codan.core.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.codan.core.prefs
new file mode 100644
index 00000000..4cf17275
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.codan.core.prefs
@@ -0,0 +1,71 @@
+eclipse.preferences.version=1
+org.eclipse.cdt.codan.checkers.errnoreturn=Warning
+org.eclipse.cdt.codan.checkers.errnoreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No return\\")",implicit\=>false}
+org.eclipse.cdt.codan.checkers.errreturnvalue=Error
+org.eclipse.cdt.codan.checkers.errreturnvalue.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused return value\\")"}
+org.eclipse.cdt.codan.checkers.nocommentinside=-Error
+org.eclipse.cdt.codan.checkers.nocommentinside.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Nesting comments\\")"}
+org.eclipse.cdt.codan.checkers.nolinecomment=-Error
+org.eclipse.cdt.codan.checkers.nolinecomment.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Line comments\\")"}
+org.eclipse.cdt.codan.checkers.noreturn=Error
+org.eclipse.cdt.codan.checkers.noreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No return value\\")",implicit\=>false}
+org.eclipse.cdt.codan.internal.checkers.AbstractClassCreation=Error
+org.eclipse.cdt.codan.internal.checkers.AbstractClassCreation.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Abstract class cannot be instantiated\\")"}
+org.eclipse.cdt.codan.internal.checkers.AmbiguousProblem=Error
+org.eclipse.cdt.codan.internal.checkers.AmbiguousProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Ambiguous problem\\")"}
+org.eclipse.cdt.codan.internal.checkers.AssignmentInConditionProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.AssignmentInConditionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Assignment in condition\\")"}
+org.eclipse.cdt.codan.internal.checkers.AssignmentToItselfProblem=Error
+org.eclipse.cdt.codan.internal.checkers.AssignmentToItselfProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Assignment to itself\\")"}
+org.eclipse.cdt.codan.internal.checkers.CaseBreakProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.CaseBreakProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No break at end of case\\")",no_break_comment\=>"no break",last_case_param\=>false,empty_case_param\=>false}
+org.eclipse.cdt.codan.internal.checkers.CatchByReference=Warning
+org.eclipse.cdt.codan.internal.checkers.CatchByReference.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Catching by reference is recommended\\")",unknown\=>false,exceptions\=>()}
+org.eclipse.cdt.codan.internal.checkers.CircularReferenceProblem=Error
+org.eclipse.cdt.codan.internal.checkers.CircularReferenceProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Circular inheritance\\")"}
+org.eclipse.cdt.codan.internal.checkers.ClassMembersInitialization=Warning
+org.eclipse.cdt.codan.internal.checkers.ClassMembersInitialization.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Class members should be properly initialized\\")",skip\=>true}
+org.eclipse.cdt.codan.internal.checkers.FieldResolutionProblem=Error
+org.eclipse.cdt.codan.internal.checkers.FieldResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Field cannot be resolved\\")"}
+org.eclipse.cdt.codan.internal.checkers.FunctionResolutionProblem=Error
+org.eclipse.cdt.codan.internal.checkers.FunctionResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Function cannot be resolved\\")"}
+org.eclipse.cdt.codan.internal.checkers.InvalidArguments=Error
+org.eclipse.cdt.codan.internal.checkers.InvalidArguments.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid arguments\\")"}
+org.eclipse.cdt.codan.internal.checkers.InvalidTemplateArgumentsProblem=Error
+org.eclipse.cdt.codan.internal.checkers.InvalidTemplateArgumentsProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid template argument\\")"}
+org.eclipse.cdt.codan.internal.checkers.LabelStatementNotFoundProblem=Error
+org.eclipse.cdt.codan.internal.checkers.LabelStatementNotFoundProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Label statement not found\\")"}
+org.eclipse.cdt.codan.internal.checkers.MemberDeclarationNotFoundProblem=Error
+org.eclipse.cdt.codan.internal.checkers.MemberDeclarationNotFoundProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Member declaration not found\\")"}
+org.eclipse.cdt.codan.internal.checkers.MethodResolutionProblem=Error
+org.eclipse.cdt.codan.internal.checkers.MethodResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Method cannot be resolved\\")"}
+org.eclipse.cdt.codan.internal.checkers.NamingConventionFunctionChecker=-Info
+org.eclipse.cdt.codan.internal.checkers.NamingConventionFunctionChecker.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Name convention for function\\")",pattern\=>"^[a-z]",macro\=>true,exceptions\=>()}
+org.eclipse.cdt.codan.internal.checkers.NonVirtualDestructorProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.NonVirtualDestructorProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Class has a virtual method and non-virtual destructor\\")"}
+org.eclipse.cdt.codan.internal.checkers.OverloadProblem=Error
+org.eclipse.cdt.codan.internal.checkers.OverloadProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid overload\\")"}
+org.eclipse.cdt.codan.internal.checkers.RedeclarationProblem=Error
+org.eclipse.cdt.codan.internal.checkers.RedeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid redeclaration\\")"}
+org.eclipse.cdt.codan.internal.checkers.RedefinitionProblem=Error
+org.eclipse.cdt.codan.internal.checkers.RedefinitionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid redefinition\\")"}
+org.eclipse.cdt.codan.internal.checkers.ReturnStyleProblem=-Warning
+org.eclipse.cdt.codan.internal.checkers.ReturnStyleProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Return with parenthesis\\")"}
+org.eclipse.cdt.codan.internal.checkers.ScanfFormatStringSecurityProblem=-Warning
+org.eclipse.cdt.codan.internal.checkers.ScanfFormatStringSecurityProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Format String Vulnerability\\")"}
+org.eclipse.cdt.codan.internal.checkers.StatementHasNoEffectProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.StatementHasNoEffectProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Statement has no effect\\")",macro\=>true,exceptions\=>()}
+org.eclipse.cdt.codan.internal.checkers.SuggestedParenthesisProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.SuggestedParenthesisProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Suggested parenthesis around expression\\")",paramNot\=>false}
+org.eclipse.cdt.codan.internal.checkers.SuspiciousSemicolonProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.SuspiciousSemicolonProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Suspicious semicolon\\")",else\=>false,afterelse\=>false}
+org.eclipse.cdt.codan.internal.checkers.TypeResolutionProblem=Error
+org.eclipse.cdt.codan.internal.checkers.TypeResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Type cannot be resolved\\")"}
+org.eclipse.cdt.codan.internal.checkers.UnusedFunctionDeclarationProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.UnusedFunctionDeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused function declaration\\")",macro\=>true}
+org.eclipse.cdt.codan.internal.checkers.UnusedStaticFunctionProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.UnusedStaticFunctionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused static function\\")",macro\=>true}
+org.eclipse.cdt.codan.internal.checkers.UnusedVariableDeclarationProblem=Warning
+org.eclipse.cdt.codan.internal.checkers.UnusedVariableDeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused variable declaration in file scope\\")",macro\=>true,exceptions\=>("@(\#)","$Id")}
+org.eclipse.cdt.codan.internal.checkers.VariableResolutionProblem=Error
+org.eclipse.cdt.codan.internal.checkers.VariableResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Symbol is not resolved\\")"}
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs
new file mode 100644
index 00000000..bdba3b4f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.core.prefs
@@ -0,0 +1,164 @@
+eclipse.preferences.version=1
+org.eclipse.cdt.core.formatter.alignment_for_arguments_in_method_invocation=16
+org.eclipse.cdt.core.formatter.alignment_for_assignment=16
+org.eclipse.cdt.core.formatter.alignment_for_base_clause_in_type_declaration=80
+org.eclipse.cdt.core.formatter.alignment_for_binary_expression=16
+org.eclipse.cdt.core.formatter.alignment_for_compact_if=16
+org.eclipse.cdt.core.formatter.alignment_for_conditional_expression=34
+org.eclipse.cdt.core.formatter.alignment_for_conditional_expression_chain=18
+org.eclipse.cdt.core.formatter.alignment_for_constructor_initializer_list=0
+org.eclipse.cdt.core.formatter.alignment_for_declarator_list=16
+org.eclipse.cdt.core.formatter.alignment_for_enumerator_list=48
+org.eclipse.cdt.core.formatter.alignment_for_expression_list=0
+org.eclipse.cdt.core.formatter.alignment_for_expressions_in_array_initializer=16
+org.eclipse.cdt.core.formatter.alignment_for_member_access=0
+org.eclipse.cdt.core.formatter.alignment_for_overloaded_left_shift_chain=16
+org.eclipse.cdt.core.formatter.alignment_for_parameters_in_method_declaration=16
+org.eclipse.cdt.core.formatter.alignment_for_throws_clause_in_method_declaration=16
+org.eclipse.cdt.core.formatter.brace_position_for_array_initializer=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_block=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_block_in_case=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_method_declaration=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_namespace_declaration=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_switch=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_type_declaration=next_line
+org.eclipse.cdt.core.formatter.comment.line_up_line_comment_in_blocks_on_first_column=false
+org.eclipse.cdt.core.formatter.comment.min_distance_between_code_and_line_comment=1
+org.eclipse.cdt.core.formatter.comment.never_indent_line_comments_on_first_column=true
+org.eclipse.cdt.core.formatter.comment.preserve_white_space_between_code_and_line_comments=true
+org.eclipse.cdt.core.formatter.compact_else_if=true
+org.eclipse.cdt.core.formatter.continuation_indentation=2
+org.eclipse.cdt.core.formatter.continuation_indentation_for_array_initializer=2
+org.eclipse.cdt.core.formatter.format_guardian_clause_on_one_line=false
+org.eclipse.cdt.core.formatter.indent_access_specifier_compare_to_type_header=false
+org.eclipse.cdt.core.formatter.indent_access_specifier_extra_spaces=0
+org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_access_specifier=true
+org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_namespace_header=false
+org.eclipse.cdt.core.formatter.indent_breaks_compare_to_cases=true
+org.eclipse.cdt.core.formatter.indent_declaration_compare_to_template_header=false
+org.eclipse.cdt.core.formatter.indent_empty_lines=false
+org.eclipse.cdt.core.formatter.indent_statements_compare_to_block=true
+org.eclipse.cdt.core.formatter.indent_statements_compare_to_body=true
+org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_cases=true
+org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_switch=false
+org.eclipse.cdt.core.formatter.indentation.size=2
+org.eclipse.cdt.core.formatter.insert_new_line_after_opening_brace_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_after_template_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_at_end_of_file_if_missing=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_catch_in_try_statement=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_closing_brace_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_colon_in_constructor_initializer_list=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_else_in_if_statement=insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_identifier_in_function_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_while_in_do_statement=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_in_empty_block=insert
+org.eclipse.cdt.core.formatter.insert_space_after_assignment_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_after_binary_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_arguments=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_parameters=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_brace_in_block=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_paren_in_cast=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_base_clause=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_case=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_labeled_statement=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_base_types=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_declarator_list=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_enum_declarations=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_expression_list=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_parameters=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_throws=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_invocation_arguments=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_arguments=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_parameters=insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_brace_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_bracket=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_cast=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_catch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_exception_specification=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_for=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_if=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_parenthesized_expression=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_switch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_while=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_postfix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_prefix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_question_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_after_semicolon_in_for=insert
+org.eclipse.cdt.core.formatter.insert_space_after_unary_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_assignment_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_before_binary_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_brace_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_bracket=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_cast=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_catch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_exception_specification=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_for=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_if=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_parenthesized_expression=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_switch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_while=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_base_clause=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_case=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_default=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_labeled_statement=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_base_types=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_declarator_list=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_enum_declarations=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_expression_list=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_throws=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_invocation_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_block=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_method_declaration=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_namespace_declaration=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_switch=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_type_declaration=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_bracket=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_catch=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_exception_specification=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_for=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_if=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_parenthesized_expression=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_switch=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_while=insert
+org.eclipse.cdt.core.formatter.insert_space_before_postfix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_prefix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_question_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_before_semicolon=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_semicolon_in_for=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_unary_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_braces_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_brackets=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_exception_specification=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.join_wrapped_lines=true
+org.eclipse.cdt.core.formatter.keep_else_statement_on_same_line=false
+org.eclipse.cdt.core.formatter.keep_empty_array_initializer_on_one_line=false
+org.eclipse.cdt.core.formatter.keep_imple_if_on_one_line=false
+org.eclipse.cdt.core.formatter.keep_then_statement_on_same_line=false
+org.eclipse.cdt.core.formatter.lineSplit=89
+org.eclipse.cdt.core.formatter.number_of_empty_lines_to_preserve=1
+org.eclipse.cdt.core.formatter.put_empty_statement_on_new_line=true
+org.eclipse.cdt.core.formatter.tabulation.char=space
+org.eclipse.cdt.core.formatter.tabulation.size=2
+org.eclipse.cdt.core.formatter.use_tabs_only_for_leading_indentations=false
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs
new file mode 100644
index 00000000..e1568bb8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.managedbuilder.core.prefs
@@ -0,0 +1,11 @@
+eclipse.preferences.version=1
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1942738257/CPATH/delimiter=;
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1942738257/CPATH/operation=remove
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1942738257/C_INCLUDE_PATH/delimiter=;
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1942738257/C_INCLUDE_PATH/operation=remove
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1942738257/append=true
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.1942738257/appendContributed=true
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1942738257/LIBRARY_PATH/delimiter=;
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1942738257/LIBRARY_PATH/operation=remove
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1942738257/append=true
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.1942738257/appendContributed=true
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs
new file mode 100644
index 00000000..7da732ea
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/.settings/org.eclipse.cdt.ui.prefs
@@ -0,0 +1,3 @@
+eclipse.preferences.version=1
+formatter_profile=_Feaser
+formatter_settings_version=1
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/Debug/openblt_stm32f303.elf b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/Debug/openblt_stm32f303.elf
new file mode 100755
index 00000000..8d549dcb
Binary files /dev/null and b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/Debug/openblt_stm32f303.elf differ
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/Debug/openblt_stm32f303.srec b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/Debug/openblt_stm32f303.srec
new file mode 100755
index 00000000..e8146458
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/Debug/openblt_stm32f303.srec
@@ -0,0 +1,943 @@
+S01900006F70656E626C745F73746D3332663330332E7372656303
+S3150800000000A00020DD3300082D3400082D34000838
+S315080000102D3400082D3400082D3400080000000097
+S315080000200000000000000000000000002D34000859
+S315080000302D340008000000002D34000809060008C9
+S315080000402D3400082D3400082D3400082D340008FE
+S315080000502D3400082D3400082D3400082D340008EE
+S315080000602D3400082D3400082D3400082D340008DE
+S315080000702D3400082D3400082D3400082D340008CE
+S315080000802D3400082D3400082D3400082D340008BE
+S315080000902D3400082D3400082D3400082D340008AE
+S315080000A02D3400082D3400082D3400082D3400089E
+S315080000B02D3400082D3400082D3400082D3400088E
+S315080000C02D3400082D3400082D3400082D3400087E
+S315080000D02D3400082D3400082D3400082D3400086E
+S315080000E02D3400082D3400082D3400082D3400085E
+S315080000F02D3400082D3400082D3400082D3400084E
+S315080001000000000000000000000000002D34000878
+S315080001102D3400082D3400082D3400082D3400082D
+S315080001202D3400082D3400082D3400082D3400081D
+S315080001302D3400082D3400080000000000000000DF
+S315080001402D3400082D3400082D3400080000000066
+S315080001500000000000000000000000000000000091
+S3150800016000000000000000002D3400082D340008AF
+S315080001702D34000800000000000000000000000008
+S30D08000180000000002D34000800
+S3150800018810B5054C237833B9044B13B10448AFF3BB
+S3150800019800800123237010BDA00000200000000085
+S315080001A84439000808B5034B1BB103490348AFF3A4
+S315080001B8008008BD00000000A4000020443900089B
+S315080001C872B6704762B6704708B5FFF7F9FF08BDFB
+S315080001D810B500F0CDF900B910BD00F08FFE002863
+S315080001E8FAD000F051FC00F0D7F900F0F3FE00F061
+S315080001F8C3F920F0604020F07F00044B986000F0B7
+S31508000208BBF94468FFF7DEFFA047E5E700ED00E025
+S3150800021870B508E0461C4D1C0B78037000F06EFCA0
+S31508000228304629462246531E9CB2002AF2D170BD92
+S3150800023808B5C1F3080353B90368994209D040F8C9
+S31508000248041B4FF40072FFF7E3FF012008BD0020E6
+S3150800025808BD012008BD2DE9F041074600F07CFFDE
+S3150800026800247F2C14D83E68A30006EB03083B44F9
+S315080002785D6800F043FC2A4600234146022000F048
+S31508000288BBFF38B956F824309D4209D10134E8E74E
+S31508000298012400E0002400F073FF2046BDE8F08141
+S315080002A80024F8E738B50D460B4B984208D00446A3
+S315080002B80A4B994206D0FFF7CEFF20B9002407E07B
+S315080002C8074C00E0044C29462046FFF7B1FF08B161
+S315080002D8204638BD0024FBE7C0020020004000087D
+S315080002E8BC0000202DE9F04106460C4617461D4677
+S315080002F821F4FF7828F001080368B3F1FF3F0DD011
+S315080003083368984505D041463046FFF7CBFF064681
+S3150800031828B33368E41A344404340CE04146FFF73A
+S3150800032887FF03460028EBD116E017F8013B04F8C7
+S31508000338013B013D0FD000F0E1FB331DE31AB3F58D
+S31508000348007FF2D308F500713046FFF7ABFF064683
+S3150800035838B1041DE9E701231846BDE8F0810023F2
+S31508000368FAE70023F8E700004FF0FF33024A136064
+S31508000378024A1360704700BFBC000020C002002074
+S3150800038810B54B1E114C241AA34218D8104B984284
+S3150800039817D90B18013B0D4CA34214D80B46014636
+S315080003A820F4FF7020F001000A4CA04203D00A4846
+S315080003B8FFF798FF10BD0948FFF794FF10BD002006
+S315080003C810BD002010BD002010BD00BFFFFF0308A8
+S315080003D8FF3F000800400008BC000020C0020020BB
+S315080003E830B585B0002303934A1E1F4B1B1A9A4241
+S315080003F831D820F4FF6323F007031C4A93422ED909
+S315080004080A18013A184CA2422BD8C01A0144C1F35B
+S31508000418CF25C1F30A0109B10135ADB2002400940C
+S3150800042801930123029300F097FEA5420DD900F027
+S3150800043865FB03A9684600F051FF50B9019B03F50F
+S31508000448006301930134A4B2EFE7012400F098FE93
+S3150800045802E00024FAE70024204605B030BD00244F
+S31508000468FAE70024F8E700BFFFFF0308FF3F000884
+S31508000478104B1B68B3F1FF3F1AD000B583B00D4A7D
+S31508000488536891680B44D1680B4411690B44516948
+S315080004980B4491690B44D26913445B4202AA42F899
+S315080004A8043D04210448FFF76BFF03B05DF804FB1D
+S315080004B801207047C0020020884100080D4B1B68C0
+S315080004C80D4A126813440D4A126813440C4A1268F6
+S315080004D813440C4A126813440B4A126813440B4A0D
+S315080004E8126813440A4A1268D34201D0002070479A
+S315080004F8012070470040000804400008084000082A
+S315080005080C4000081040000814400008184000086D
+S315080005188841000808B50C4B1B68B3F1FF3F04D0A7
+S315080005280948FFF798FE034650B1084B1B68B3F114
+S31508000538FF3F07D00548FFF78EFE034600B10123A3
+S31508000548184608BD0123FBE7C0020020BC000020AE
+S31508000558004870470040000808B5FFF705FF08BDC2
+S3150800056808B5FFF70DFF08BD08B5FFF739FF08BD41
+S3150800057808B5FFF7A3FF08BD08B5FFF7E9FF08BDEB
+S3150800058808B5FFF775FF034608B9184608BDFFF70B
+S31508000598C1FF0346F9E700000022014B1A607047BD
+S315080005A810E000E008B5FFF7F7FF054B054A5A6063
+S315080005B800229A6005211960034B1A6008BD00BF1E
+S315080005C810E000E03F190100C4040020044B1B6832
+S315080005D813F4803F03D0034A136801331360704746
+S315080005E810E000E0C404002008B5FFF7EFFF014B50
+S315080005F8186808BDC404002008B5FFF7F5FF08BD4C
+S3150800060870470000094B03F11801002232B19A74A9
+S3150800061800225A61054A064B1A6070479A7459614E
+S31508000628183318310132D2B2F0E700BF08050020A6
+S31508000638380500200A4B1B6883B110B45C69084A60
+S31508000648146019749860D86000225A7418600139C1
+S3150800065808445860987C5DF8044B7047FF2070473B
+S315080006683805002038B504460D46012804D94FF444
+S31508000678D171124800F09AF962002244D100104B51
+S315080006880B445A7C1B7C9A4213D00D4B0B44DA68F0
+S3150800069815705A7C01325A74DA680132DA605B6876
+S315080006A89A4208D9064A084651580244D160012098
+S315080006B838BD002038BD012038BD00BF5C390008A8
+S315080006C80805002008B50146024B1878FFF7CAFF47
+S315080006D808BD00BF3C05002038B504460D4601286C
+S315080006E804D94FF4E271134800F060F904EB4403A7
+S315080006F8DA00114B13445B7CBBB162002244D1007B
+S315080007080D4B0B449A6812782A705A7C013A5A7427
+S315080007189A6801329A605B689A4208D9064A084676
+S31508000728515802449160012038BD002038BD012087
+S3150800073838BD00BF5C3900080805002008B5014621
+S31508000748024B1878FFF7C8FF08BD00BF80050020D0
+S3150800075810B50446012804D94FF4F271044800F08C
+S3150800076825F904EB4404E200024B1344587C10BDF7
+S315080007785C3900080805002038B5FFF743FF144C14
+S315080007884021601CFFF756FF2070124D4021681C57
+S31508000798FFF750FF28702378FF2B13D0FF2811D0B6
+S315080007A80D4C00220D49204602F016F90C49204640
+S315080007B802F03BF9204602F03FF9D4F8200200F08F
+S315080007C8B3FF38BD7421074800F0F0F8E8E700BF22
+S315080007D83C05002080050020C40500206C00002088
+S315080007E8080000205C39000810B5044CD4F820022B
+S315080007F800F0ABFF204602F006F910BDC40500203C
+S3150800080870B506460D463F290AD82846FFF75AFF07
+S31508000818012803D09F210E4800F0C8F8002406E0F6
+S315080008289B210B4800F0C2F8EFE70134A4B2ABB23B
+S315080008389C420BD200F062F9305DFFF743FF0128AE
+S31508000848F3D0A821024800F0B1F8EEE770BD00BF62
+S315080008585C39000870B506460D461F4BD3F82002CA
+S3150800086801F001FE1D4B1C789CB91D48FFF766FF71
+S31508000878012801D0204670BD194B1B78013BDBB215
+S315080008883E2BF7D80122154B1A700022154B1A7001
+S31508000898F0E7144B1B78013311481844FFF74EFF4D
+S315080008A80446012801D00024E4E70E4B1A780132E1
+S315080008B8D2B21A700A4B1B789A4201D00024D9E79B
+S315080008C809493046FFF7A4FC0022044B1A70054B69
+S315080008D81B782B70CEE700BFC40500202808002027
+S315080008E8E807002029080020E907002030B583B06A
+S315080008F8144B1878FFF72CFF08B30546402800D98B
+S315080009084025002405E09DF807200F4B1A550134A9
+S31508000918E4B2A5420DD90DF107010A4B1878FFF77D
+S31508000928DBFE0128EFD04FF49471084800F03EF832
+S31508000938E9E7ABB2044A8121054802F04BFF03B048
+S3150800094830BD00BF3C050020C80400205C390008FB
+S31508000958C405002070B5044602F0DCFD06462146AB
+S315080009680F4802F053FF85B2002401E00134A4B20F
+S31508000978AC420CD2315D0B4B1878FFF773FE012891
+S31508000988F4D04FF4A571084800F010F8EEE702F025
+S31508000998C1FD402302460121014802F029FF70BD26
+S315080009A8C4050020800500205C39000808B500F059
+S315080009B8A5F8FCE708B500F099F8012803D0094B13
+S315080009C81B78012B00D008BDFFF70EFE064B1B68E7
+S315080009D803F5FA639842F6D30022024B1A70FFF71A
+S315080009E8F7FBF0E72A0800202C08002008B50122A2
+S315080009F8044B1A70FFF7F8FD034B1860FFF7DAFF88
+S31508000A0808BD00BF2A0800202C08002008B5FFF7F3
+S31508000A18DBFB00F06FF8FFF7C5FDFFF79DFD00F05B
+S31508000A280DF8FFF7E3FF08BD08B500F067F8FFF70C
+S31508000A38CDFD00F00FF8FFF7BDFF08BD08B500F0BB
+S31508000A48CBF9FFF799FE0222014B1A7008BD00BFC1
+S31508000A580000002000B583B00DF107010848FFF72C
+S31508000A68F9FE012802D003B05DF804FB0222054B03
+S31508000A781A709DF80710024800F0CEF9F3E700BF90
+S31508000A88300800200000002008B5FFF7ADFE08BDB5
+S31508000A9808B5054B1B78022B02D000F0B5F908BD3E
+S31508000AA8C9B2FFF7ADFEF8E700000020064B1B7831
+S31508000AB8022B05D0032B05D0012B03D04020704705
+S31508000AC83F2070470020704700000020064B1B781F
+S31508000AD8022B05D0032B05D0012B03D040207047E5
+S31508000AE83F207047002070470000002008B500F036
+S31508000AF881F908BD08B500F02BFA08BD08B500F05D
+S31508000B082CFA08BD0022014B5A707047700800205D
+S31508000B18034BFE22DA7018710222A3F844207047A4
+S31508000B287008002010B5054C00232370FFF7EAFF6C
+S31508000B38FF23E3700123A4F8443010BD7008002091
+S31508000B48064BFF22DA7000221A71597859719A7180
+S31508000B58DA711A720622A3F8442070477008002032
+S31508000B6808B50020FFF7D4FF08BD0000074BFF2291
+S31508000B78DA70074A9A6400221A715A719A7107221A
+S31508000B88C3F807200822A3F84420704770080020F5
+S31508000B9884390008044BFF22DA7042689A640122F5
+S31508000BA8A3F84420704700BF7008002008B5312014
+S31508000BB8FFF7AEFF08BD000038B5084CFF23E37001
+S31508000BC8002525716571FFF771FFA071E57125721A
+S31508000BD865720723A4F8443038BD00BF70080020A2
+S31508000BE838B5FFF78FFF0E4C01252570FF23E370F4
+S31508000BF81023237100236371FFF758FFA071FFF7CD
+S31508000C0865FFE071FFF762FFC0F30720207265727F
+S31508000C18A5720823A4F84430FFF79EFC38BD00BF28
+S31508000C287008002038B505464478FFF73FFF0138B5
+S31508000C38844210DC0A4C6A78A16C201DFFF7E8FA92
+S31508000C48FF23E3706A78A36C1344A3646B780133B3
+S31508000C58A4F8443038BD2220FFF75AFF38BD00BF34
+S31508000C687008002038B504464578FFF71FFF013895
+S31508000C78854211DC61680A4DA9646278281DFFF768
+S31508000C88C7FAFF23EB706278AB6C1344AB646378DE
+S31508000C980133A5F8443038BD2220FFF739FF38BD9F
+S31508000CA870080020F8B505461746002406E015F82A
+S31508000CB8013B1C44E4B2FFF721FF31464E1E0029CA
+S31508000CC8F5D13C600120F8BD10B5084CFF23E37048
+S31508000CD8E21D4168A06CFFF7E5FF207100236371E8
+S31508000CE8A3710823A4F8443010BD00BF700800207B
+S31508000CF838B505460D4B9C6CFFF7D8FE6A1C411E95
+S31508000D082046FFF72DFC60B1084CFF23E370FFF778
+S31508000D18CDFE0138A36C0344A3640123A4F8443028
+S31508000D2838BD3120FFF7F4FE38BD00BF7008002033
+S31508000D3838B504464578FFF7B9FE023885420EDC11
+S31508000D48114BFF22DA700122A3F84420617851B9C1
+S31508000D58FFF716FC90B93120FFF7DAFE38BD2220D6
+S31508000D68FFF7D6FE38BDA21C074B986CFFF7F8FBB1
+S31508000D7828B16178044A936C0B44936438BD3120D2
+S31508000D88FFF7C6FE38BD00BF7008002008B54168E1
+S31508000D98074B986CFFF7E8FB30B1054BFF22DA7072
+S31508000DA80122A3F8442008BD3120FFF7B1FE08BD8B
+S31508000DB87008002008B5FFF70BFA034BFF22DA7014
+S31508000DC80122A3F8442008BD7008002008B589B296
+S31508000DD8FFF75EFE08BD0000054B00221A709A64EC
+S31508000DE883F84320A3F844209A705A70704700BFC6
+S31508000DF870080020034B1B780BB1012070470020B0
+S31508000E08704700BF700800200022024B83F8432071
+S31508000E18704700BF7008002008B50378FF2B04D078
+S31508000E28354A1278012A14D008BDFFF7D9FE324B85
+S31508000E3893F84330012B5AD02F4BB3F944100029A5
+S31508000E48F2DD1846012380F843300330FFF7BEFF6A
+S31508000E58EAE7C93B352B46D8DFE803F03345454270
+S31508000E6845453F363C394545454545454545454546
+S31508000E78454545454545454545454545454545450C
+S31508000E88454545454545241E1B2145454527452ACB
+S31508000E982D30FFF7C7FECAE7FFF7E4FEC7E7FFF7F7
+S31508000EA879FEC4E7FFF710FFC1E7FFF75FFEBEE765
+S31508000EB8FFF756FEBBE7FFF743FEB8E7FFF732FE34
+S31508000EC8B5E7FFF715FFB2E7FFF732FFAFE7FFF71A
+S31508000ED873FEACE7FFF75AFFA9E7FFF76BFFA6E72C
+S31508000EE8FFF764FEA3E72020FFF712FE9FE710200E
+S31508000EF8FFF70EFEA0E700BF7008002008B54FF000
+S31508000F0890431B6913F0010F01D0002008BD00F0BB
+S31508000F1859F8012008BD012817D030B587B04FF415
+S31508000F28805401940123029300250395032304930F
+S31508000F3801A94FF0904000F023FA2A4621464FF0BF
+S31508000F48904000F06BFB07B030BD7047704770479C
+S31508000F5808B5642000F006F808BD08B500F008F8DA
+S31508000F6808BD0000014B1880704700BFBC08002068
+S31508000F7808B5FFF739FB0F4B1B68984210D30E4B81
+S31508000F881B7873B901220C4B1A704FF480720B4BFD
+S31508000F989A61FFF729FB0A4B1B881844054B18600A
+S31508000FA808BD0022044B1A704FF48072034B9A62EC
+S31508000FB8EFE700BFC0080020BE0800200010004860
+S31508000FC8BC0800204FF48072014B9A62704700BF34
+S31508000FD80010004810B5074B4FF0FF321A6100247D
+S31508000FE81C61DA60DC609A629C6202F0D1F92046DC
+S31508000FF810BD00BF0010024010B50446074B18681C
+S31508001008074BA3FB0030800900F062F8002221464E
+S315080010184FF0FF3000F02AF8002010BD0400002029
+S31508001028D34D621008B5074A136843F010031360D6
+S31508001038032000F009F80020FFF7DEFF02F062F946
+S31508001048002008BD00200240074AD36823F4E0635D
+S315080010581B041B0C000200F4E060184340F0BF6054
+S3150800106840F40030D060704700ED00E030B4164B0D
+S31508001078DB68C3F30223C3F10704042C28BF04243E
+S315080010881D1D062D17D9033B012505FA04F4013C55
+S315080010982140994005FA03F3013B134019430028F8
+S315080010A80BDB0901C9B200F1604000F5614080F820
+S315080010B8001330BC70470023E6E700F00F0009016B
+S315080010C8C9B2024B1954F4E700ED00E014ED00E04C
+S315080010D80138B0F1807F0AD2064B5860F021064ADB
+S315080010E882F823100020986007221A6070470120AA
+S315080010F8704700BF10E000E000ED00E00022044B56
+S31508001108DA61044A136943F00103136101807047E1
+S31508001118D0080020002002400D4BDB6813F0100FA2
+S3150800112814D00C4AD36943F00203D3611023084A42
+S31508001138D26812F0040F06D00649CA6942F00102BD
+S31508001148CA6143F00403024AD36070470023EEE7F6
+S3150800115800200240D0080020074B1B6913F0800FB7
+S3150800116807D0054B054A5A6002F188325A600020B2
+S3150800117870470120704700BF0020024023016745D9
+S31508001188034A136943F0800313610020704700BFC0
+S315080011980020024038B50446FFF72EFA0546154BD7
+S315080011A8DB6813F0010F0AD0B4F1FF3FF7D0E4B1BA
+S315080011B8FFF722FA401B8442F1D2032038BD0D4BB3
+S315080011C8DB6813F0200F02D020220A4BDA60094B9D
+S315080011D8DB6813F0100F04D1064BDB6813F0040F15
+S315080011E805D0FFF799FF012038BD032038BD002038
+S315080011F838BD00BF002002402DE9F843234C247E61
+S31508001208012C03D102231846BDE8F8831E469046EA
+S315080012180F46044601221D4B1A764CF25030FFF74A
+S31508001228B9FF034670BB012C29D0022C24D04FF0F5
+S31508001238040900244C4525D22101C1F12002A1F157
+S31508001248200328FA01F106FA02F2114326FA03F3F3
+S31508001258194389B207EB4400FFF750FF4CF25030A8
+S31508001268FFF798FF0A4B1D6925F001051D6103461E
+S3150800127840B90134E4B2DDE74FF00209D9E74FF087
+S315080012880109D6E70021014A1176BCE7D0080020F3
+S31508001298002002400022064BDA61064B1A6942F022
+S315080012A804021A611A6942F040021A61704700BFBF
+S315080012B8D0080020002002400022064BDA61064BBF
+S315080012C81A6942F002021A6158611A6942F0400224
+S315080012D81A617047D008002000200240264B1B7E62
+S315080012E8012B45D070B50E4605460122224B1A76C3
+S315080012F80368934220D04CF25030FFF74BFF88BB67
+S315080013084FF0FF3333606C680121AA686B6803EBFA
+S31508001318C2239C4227D22046FFF7CEFF4CF2503014
+S31508001328FFF738FF154A136923F0020313610146CC
+S31508001338B0B904F50064E8E74CF25030FFF72AFF25
+S3150800134808B101210FE0FFF7A5FF4CF25030FFF76F
+S3150800135821FF0146094A136923F00403136102E0D1
+S31508001368346000E001210022034B1A76084670BD56
+S3150800137802210846704700BFD00800200020024016
+S31508001388F0B583B000238CE0DE08083650F826400E
+S3150800139803F0070E4FEA8E0E0F2707FA0EF724EA10
+S315080013A807040F6907FA0EF73C4340F8264087E01A
+S315080013B886682640CF6807FA0EF73E438660466871
+S315080013C826EA05054E68C6F300169E40354345606D
+S315080013D8C5682C408D6805FA0EF52C43C4604C6820
+S315080013E814F0805F5CD04A4CA56945F00105A561F3
+S315080013F8A46904F001040194019C9D08AE1C454C9F
+S3150800140854F8264003F00306B6000F27B74024EA27
+S315080014180704B0F1904F70D03F4FB8426FD007F528
+S315080014288067B8426DD007F58067B8426BD007F574
+S315080014388067B8425FD0052707FA06F634430235AF
+S31508001448344E46F82540354C2568D44305EA040643
+S315080014584F6817F4803F01D042EA05062F4D2E60E3
+S315080014686D6804EA05064F6817F4003F01D042EA9A
+S3150800147805062A4D6E60AD6804EA05064F6817F436
+S31508001488801F01D042EA0506244DAE60ED682C405F
+S315080014984E6816F4001F01D042EA05041F4AD460B4
+S315080014A801330A6832FA03F42FD001259D402A40F1
+S315080014B8F6D04C68022C3FF467AF122C3FF464AFA1
+S315080014C806684FEA430E032404FA0EF4E44326405A
+S315080014D84F6807F0030707FA0EF73E4306604E689B
+S315080014E8771E012F7FF664AF112E3FF461AF122ED7
+S315080014F87FF46EAF5CE704279EE700279CE7012781
+S315080015089AE7022798E7032796E703B0F0BD00BFD6
+S315080015180010024000000140000400480004014091
+S31508001528002331FA03F271D0F0B50AE0042500E089
+S31508001538002505FA02F294424BD0013331FA03F238
+S3150800154863D001229A4011EA020EF6D005685E00B9
+S315080015580324B440E44325400560DF08083750F8FB
+S3150800156827C003F00705AD000F2606FA05F52CEA8D
+S31508001578050540F82750856825408560456825EAA9
+S3150800158802024260C2681440C4609F08BC1C204A14
+S3150800159852F8244003F00302920096403440B0F112
+S315080015A8904FC5D01B4DA8420DD005F58065A842B9
+S315080015B80BD005F58065A84209D005F58065A842CF
+S315080015C8B4D00525B5E70125B3E70225B1E7032514
+S315080015D8AFE70F4DBA1C55F8224024EA060645F827
+S315080015E822600D4C22686FEA0E0E02EA0E0222608D
+S315080015F862680EEA02026260A2680EEA0202A26045
+S31508001608E2680EEA0202E26097E7F0BD704700BF9B
+S315080016180000014000040048000401400AB981623C
+S3150800162870478161704700284FD010B5044690F876
+S31508001638713323B1032384F87133002214E080F848
+S31508001648703301F06BFFF5E7D100891A8B00234444
+S31508001658012183F8291083F82820002183F82B1004
+S3150800166859639963D963013260688242ECD30022D0
+S3150800167811E0D100891A8B002344002183F8CD1183
+S3150800168883F8CC2183F8CF11C3F8D811C3F8DC1135
+S31508001698C3F8E01101328242EBD322680123A2F88B
+S315080016A8403022680020A2F840002268A2F84400C8
+S315080016B82268A2F8500022684FF43F41A2F8401069
+S315080016C884F8240084F8713310BD0120704708B5E2
+S315080016D8012102F0A1F8002008BD90F87033012B0B
+S315080016E80FD003680122A3F8402002680023A2F855
+S315080016F8443002680321A2F8401080F8703318466F
+S3150800170870470220704768B110B50446032380F86D
+S315080017187133FFF7E2FF204601F028FF002084F81E
+S31508001728710310BD0120704790F87033012B01D161
+S315080017380220704710B50446012180F8701302F09C
+S315080017486BF8002084F8700310BD90F87033012BED
+S3150800175801D10220704710B50446012380F870337A
+S31508001768002102F059F8002084F8700310BD90F89B
+S315080017787033012B0FD0012380F8703341B9036801
+S315080017888022A3F84C20002380F870331846704747
+S3150800179880F82410F7E70220704770B44DB2002D80
+S315080017A81EDB01F07F06C6EBC606B40004F5E47432
+S315080017B80444043401F07F012170ED0F6570E2607E
+S315080017C8E37090F87033012B00F0A681012380F8A6
+S315080017D87033E378032B17D8DFE803F00A79616CCE
+S315080017E801F07F06C6EBC606B40028340444E1E7D0
+S315080017F80268217832F8213023F4EC4323F0700389
+S3150800180843F4007322F821300168227831F822302F
+S3150800181823F0F0031B051B0D134343F4004343F061
+S31508001828800321F82230A37A002B40F0B38063782E
+S31508001838002B59D00368B3F850202178C90011FA4B
+S3150800184882F203EB4203A28822F00102A3F80024DD
+S315080018580268217832F8213013F0400F09D023F0B6
+S31508001868F0031B051B0D43F4004343F0C00322F89D
+S3150800187821300268217832F8213023F4E04323F036
+S31508001888400383F0200343F4004343F0800322F81F
+S315080018982130002380F87033184670BC70470268F8
+S315080018A8217832F8213023F4EC4323F0700322F828
+S315080018B82130A9E70268217832F8213023F4EC436D
+S315080018C823F0700343F4C06322F821309CE70268CA
+S315080018D8217832F8213023F4EC4323F0700343F4DB
+S315080018E8806322F821308FE70268B2F850302178F1
+S315080018F8C90011FA83F3043302EB4303A28822F0E2
+S315080019080102A3F800240268B2F850302178C90009
+S3150800191811FA83F3063302EB4303E2683E2A2ED90B
+S31508001928C2F34F1112F01F0F01D1013989B26FEABC
+S31508001938C1616FEA5141A3F800140268217832F8A8
+S31508001948213013F4804F09D023F0F0031B051B0D33
+S3150800195843F4404343F0800322F821300268217893
+S3150800196832F8213023F4804323F0700383F440537C
+S3150800197843F4004343F0800322F8213089E7C2F391
+S315080019884F0112F0010F01D0013189B28902A3F87B
+S315080019980014D2E70268217832F8213023F4F87364
+S315080019A81B051B0D43F4014343F0800322F821303D
+S315080019B80368B3F850202178C90011FA82F203EBBC
+S315080019C84203E28822F00102A3F800240268B2F86A
+S315080019D850302178C90011FA83F3043302EB430324
+S315080019E8228922F00102A3F800246378002B4AD141
+S315080019F80268217832F8213013F4804F09D023F091
+S31508001A08F0031B051B0D43F4404343F0800322F8FB
+S31508001A1821300268217832F8213013F0400F09D0B6
+S31508001A2823F0F0031B051B0D43F4004343F0C003E2
+S31508001A3822F821300268217832F8213023F0F003A1
+S31508001A481B051B0D43F4004343F0C00322F821305D
+S31508001A580268217832F8213023F4804323F0700392
+S31508001A6883F4405348F280052B4322F82130026854
+S31508001A78217832F8213023F4E04323F040032B433E
+S31508001A8822F8213005E70268217832F8213013F464
+S31508001A98804F09D023F0F0031B051B0D43F4404380
+S31508001AA843F0800322F821300268217832F8213081
+S31508001AB813F0400F09D023F0F0031B051B0D43F460
+S31508001AC8004343F0C00322F821300268217832F82F
+S31508001AD8213023F0F0031B051B0D43F4404343F064
+S31508001AE8800322F821300368217833F8212022F46C
+S31508001AF8E04222F0400248F280052A4323F82120D2
+S31508001B080268217832F8213023F4804323F07003E1
+S31508001B182B4322F82130BCE60220BEE630B44AB28E
+S31508001B28002A3FDB01F07F04C4EBC404A30003F5D5
+S31508001B38E4730344043301F07F011970D20F5A7015
+S31508001B4890F87023012A00F0EA80012280F87023B1
+S31508001B589A7A002A4ED15A7862B301681C7831F805
+S31508001B68242012F0400F09D022F0F0021205120DB7
+S31508001B7842F4004242F0C00221F82420026819788B
+S31508001B8832F8213023F4E04323F0400343F40043BA
+S31508001B9843F0800322F82130002380F87033184672
+S31508001BA830BC704701F07F04C4EBC404A300283393
+S31508001BB80344C0E701681C7831F8242012F4804FE2
+S31508001BC809D022F0F0021205120D42F4404242F002
+S31508001BD8800221F824200268197832F8213023F483
+S31508001BE8804323F0700343F4004343F0800322F84C
+S31508001BF82130D1E75A78002A48D101681C7831F88B
+S31508001C08242012F4804F09D022F0F0021205120D92
+S31508001C1842F4404242F0800221F8242001681C78E8
+S31508001C2831F8242012F0400F09D022F0F0021205EC
+S31508001C38120D42F4004242F0C00221F8242001683D
+S31508001C481C7831F8242022F0F0021205120D42F40D
+S31508001C58004242F0C00221F8242001681D7831F8B4
+S31508001C68252022F4804222F0700248F2800422439A
+S31508001C7821F825200268197832F8213023F4E04340
+S31508001C8823F04003234322F8213085E701681C78AE
+S31508001C9831F8242012F4804F09D022F0F0021205F8
+S31508001CA8120D42F4404242F0800221F824200168CD
+S31508001CB81C7831F8242012F0400F09D022F0F002DF
+S31508001CC81205120D42F4004242F0C00221F82420FF
+S31508001CD801681C7831F8242022F0F0021205120D4A
+S31508001CE842F4404242F0800221F8242001681D7817
+S31508001CF831F8252022F4E04222F0400248F2800416
+S31508001D08224321F825200268197832F8213023F46D
+S31508001D18804323F07003234322F821303CE702204E
+S31508001D283EE770B401F07F01CD006D1AAC0004449B
+S31508001D38C4F8DC21C4F8E0310022C4F8E42184F8A8
+S31508001D48CD2184F8CC11D4F8D821934244D9C1EBD3
+S31508001D58C105AC0004449B1AC4F8E031C1EBC104C0
+S31508001D68A300034493F8D631002B49D10468B4F884
+S31508001D785030C1EBC106B500054495F8CC51ED00C5
+S31508001D8815FA83F3063304EB43033E2A2DD9C2F327
+S31508001D984F1412F01F0F01D1013CA4B26FEAC464B4
+S31508001DA86FEA5444A3F800440268C1EBC1018B00EA
+S31508001DB8184490F8CC1132F8213023F4804323F0E4
+S31508001DC8700383F4405343F4004343F0800322F836
+S31508001DD82130002070BC7047C1EBC104A200024440
+S31508001DE80024C2F8E0411A46B8E7C2F34F0412F0D5
+S31508001DF8010F01D00134A4B2A402A3F80044D3E722
+S31508001E08C1EBC104A300034493F8CD314BBB046866
+S31508001E18B4F85030C1EBC106B500054495F8CC5165
+S31508001E28ED0015FA83F3063304EB43033E2A0DD96E
+S31508001E38C2F34F1412F01F0F01D1013CA4B26FEA86
+S31508001E48C4646FEA5444A3F80044ADE7C2F34F04E8
+S31508001E5812F0010F01D00134A4B2A402A3F8004479
+S31508001E68A2E7012BA0D10468B4F85030C1EBC1062B
+S31508001E78B500054495F8CC51ED0015FA83F30633F9
+S31508001E8804EB4303A3F800248EE701F07F01C1EBB6
+S31508001E98C1018B001844B0F8E4017047F8B5054647
+S31508001EA801F07F04E000001B810029448A63CB63A4
+S31508001EB800220A64012281F8292081F828404F6BFC
+S31508001EC8BB423CD9DB1BCB63C4EBC4039A002A4448
+S31508001ED892F83230002B3AD02868C4EBC402930033
+S31508001EE82B4493F8283030F8233013F0400F44D0A9
+S31508001EF8C4EBC40293002B441A8EE3001B1B9E00F6
+S31508001F082E44BBB2B16B00F028FC96F82930002B9A
+S31508001F1839D0012B46D12A68C4EBC4018B002B445F
+S31508001F2893F8281032F8213023F0F0031B051B0D0F
+S31508001F3843F4404343F0800322F8213032E0C4EBEF
+S31508001F48C4018A002A440021D1631F46BCE7BFB2F0
+S31508001F5816463B46928DB16B286800F0FEFB2A6848
+S31508001F68B2F8503096F82810C90011FA83F30233EC
+S31508001F7802EB4303A3F8007414E0C4EBC40293000D
+S31508001F882B44DA8DB9E72A6896F8281032F82130F2
+S31508001F9823F0F0031B051B0D43F4004343F0C0036D
+S31508001FA822F821302A68C4EBC404A3001D4495F816
+S31508001FB8281032F8213023F4E04323F0400383F055
+S31508001FC8300343F4004343F0800322F8213000200D
+S31508001FD8F8BD70B582B005460023ADF80430AAE10D
+S31508001FE8038823F4E14323F0700303802A68B2F8D0
+S31508001FF8503095F82810C90011FA83F3023302EB1A
+S315080020084303B3F80034C3F309032B64AA6B1344D8
+S31508002018AB630021284601F0D3FA95F82430002B43
+S3150800202800F08981EB6B002B40F085812A6895F8CA
+S31508002038243043F08003A2F84C30002385F8243076
+S3150800204879E1B0F8503095F8CC21D20012FA83F32A
+S31508002058063300EB4303B3F80034C3F30903C5F8A2
+S31508002068E431B5F8D02105F55D7100F08CFB2A68D6
+S31508002078138823F070031B051B0D1380284601F0EF
+S315080020888BFA58E1B5F8D021D5F8DC1100F07BFBBE
+S31508002098D5F8E421D5F8DC311344C5F8DC3189E1F3
+S315080020A8C2F34F0112F0010F01D0013189B289023A
+S315080020B8A3F800149BE130F82430ADF80430BDF8D5
+S315080020C8042012F4004F35D1BDF8043013F0800F00
+S315080020D800F031812A6832F8243023F4E14323F0EA
+S315080020E8700322F82430C4EBC40293001A462B4422
+S315080020F893F83230002B40F0C5802868B0F8503085
+S315080021082A4492F82810C90011FA83F3023300EB1F
+S315080021184303B3F80034C3F309031364002B00F030
+S31508002128E680E200121B910029448A8D896B00F02B
+S3150800213814FBDCE023F070031B051B0D20F8243084
+S31508002148C4EBC40293001A462B4493F8D631D3B984
+S315080021582868B0F8503011462A4492F8CC21D200A3
+S3150800216812FA83F3063300EB4303B3F80064C6F3A5
+S315080021780906A6B329443346B1F8D021D1F8DC11AB
+S3150800218800F001FB2BE02868C4EBC40293002B443B
+S3150800219893F8CC3130F8232012F4804F4ED0B0F89B
+S315080021A85020DB0013FA82F3023300EB4303B3F83B
+S315080021B80064C6F30906AEBB2A68C4EBC4018B00E3
+S315080021C82B4493F8CC1132F8213023F0F0031B0581
+S315080021D81B0D43F4004343F0C00322F82130E20004
+S315080021E8121B93002B44D3F8E4213244C3F8E421A4
+S315080021F8D3F8DC213244C3F8DC21D3F8E0313BB10B
+S31508002208C4EBC40081002944D1F8D8118E422FD2D4
+S31508002218C4EBC40293002B4493F8CC11284601F06A
+S31508002228C3F951E7E3001B1B990029443346B1F863
+S31508002238D221D1F8DC1100F0A6FABDE7B0F8502093
+S31508002248DB0013FA82F3063300EB4303B3F80064A2
+S31508002258C6F30906002EAFD0E3001B1B99002944D4
+S315080022683346B1F8D421D1F8DC1100F08CFAA3E78B
+S31508002278C4EBC4008100294491F8CC112846FFF71D
+S3150800228850FD21E72868C4EBC40293002B4493F851
+S31508002298283030F8232012F0400F00F0BC80B0F840
+S315080022A85020DB0013FA82F3023300EB4303B3F83A
+S315080022B80034C3F30903C4EBC4018A0011462A444F
+S315080022C81364002B40F0A1802A68C4EBC4018B0074
+S315080022D82B4493F8281032F8213023F0F0031B0515
+S315080022E81B0D43F4404343F0800322F82130296844
+S315080022F8B1F85020E000001B83002B4493F828000F
+S31508002308C00010FA82F2023201EB4202B2F8002447
+S31508002318C2F309021A64996B0A449A63DB6B002BA9
+S3150800232840F09480C4EBC404A3002B4493F8281007
+S31508002338284601F045F92868B0F844309BB2ADF84C
+S31508002348063013F4004F00F08B80BDF8064014F0F1
+S315080023580F047FF4B0AEBDF8063013F0100F3FF443
+S315080023683FAE03889BB2ADF80430BDF8043013F4C9
+S31508002378006F7FF466AEBDF8043013F4004FDAD068
+S31508002388038823F070031B051B0D03802868B0F823
+S31508002398503095F8CC21D20012FA83F3063300EBB5
+S315080023A84303B3F80034C3F30903C5F8E431002B33
+S315080023B87FF468AE0021284601F0F6F82A68B2F8D4
+S315080023C850309BB2063302EB4303D5F8D8213E2A90
+S315080023D87FF666AEC2F34F1112F01F0F01D101390D
+S315080023E889B26FEAC1616FEA5141A3F800142A68F5
+S315080023F8138823F4804323F0700383F4405343F48B
+S31508002408004343F08003138095E72944CA8D896BF6
+S3150800241800F0A3F958E7B0F85020DB0013FA82F366
+S31508002428063300EB4303B3F80034C3F30903C4EBDC
+S31508002438C4018A0011462A441364002B3FF444AFAA
+S3150800244829440A8E896B00F088F93DE7C4EBC40471
+S31508002458A100294491F828102846FFF71FFD6AE7C6
+S31508002468002002B070BD10B504460368B3F84430BE
+S3150800247813F4004F50D12368B3F8442012F4806F40
+S315080024884DD12368B3F8442012F4804F03D04BF695
+S31508002498FF72A3F844202368B3F8442012F4005FB7
+S315080024A803D04DF6FF72A3F844202368B3F84420F6
+S315080024B812F4805F3FD12368B3F8442012F4006F02
+S315080024C819D0B3F8402092B242F00802A3F8402087
+S315080024D823684FF2FF72A3F844202268B2F8403006
+S315080024E89BB243F00403A2F840302368B3F844309B
+S315080024F813F4805F39D02368B3F8442012F4007FB8
+S3150800250837D12368B3F8442012F4807F03D04FF6F6
+S31508002518FF62A3F8442010BDFFF75BFDABE74FF653
+S31508002528FF32A3F84420204601F05BF80021204634
+S31508002538FFF71DF9A5E7B3F8402092B222F0040286
+S3150800254892B2A3F840202268B2F840309BB223F032
+S3150800255808039BB2A2F84030204601F061F82368C8
+S315080025684EF6FF72A3F84420A5E7204601F046F880
+S31508002578C1E74FF6FF52A3F84420204601F02BF88E
+S31508002588BFE790F87033012B56D010B4012380F8B2
+S3150800259870334AB2002A26DBC1EBC104A30003F54F
+S315080025A8E4730344043301249C7001F07F01197015
+S315080025B8D20F5A70F9B9026832F8213023F48043E9
+S315080025C823F0400383F4805383F0100343F4004355
+S315080025D843F0800322F82130002380F87033184628
+S315080025E85DF8044B704701F07F04C4EBC404A300EC
+S315080025F828330344D7E77AB1026832F8213023F43E
+S31508002608E04323F0400383F0100343F4004343F008
+S31508002618800322F82130DFE7026832F8213023F4F4
+S31508002628804323F0700383F4805343F4004343F054
+S31508002638800322F82130CFE70220704710B44AB247
+S31508002648002A3EDBC1EBC104A30003F5E473034487
+S31508002658043300249C7001F07F011970D20F5A7058
+S3150800266890F87023012A56D0012280F870235A78E8
+S315080026787AB301681C7831F8242012F0400F09D083
+S3150800268822F0F0021205120D42F4004242F0C0028E
+S3150800269821F824200268197832F8213023F4E04317
+S315080026A823F0400383F0300343F4004343F08003E8
+S315080026B822F82130002380F8703318465DF8044B59
+S315080026C8704701F07F04C4EBC404A300283303440D
+S315080026D8BFE701681C7831F8242012F4804F09D026
+S315080026E822F0F0021205120D42F4404242F080022E
+S315080026F821F824200268197832F8213023F4804317
+S3150800270823F0700383F4405343F4004343F08003F3
+S3150800271822F82130CEE70220D0E710B411F0800F56
+S3150800272810D001F07F01C1EBC1018C002834204488
+S3150800273882B101228272C3801B0C038100205DF8D6
+S31508002748044B7047C1EBC1018C0004F5E4742044BE
+S315080027580430EDE782728380F0E701335B0800EB0B
+S31508002768420202F580626BB110B40C78487844EAE4
+S31508002778002422F8044B0231013B002BF5D15DF801
+S31508002788044B7047704770B45E0800EB420202F5C6
+S31508002798806208E032F8044B0D4605F8024B240A15
+S315080027A84C70013E2946002EF4D113F0010F01D0D2
+S315080027B813880B7070BC7047B0F1904F10D0314B2E
+S315080027C8984218D0304B984223D0304B98422ED096
+S315080027D82F4B984239D02F4B984244D00020704747
+S315080027E82D4B9A6A42F400329A629A6A22F40032A7
+S315080027F89A620120704703F1784303F503339A6A0E
+S3150800280842F480229A629A6A22F480229A62012005
+S31508002818704703F1784303F502339A6A42F40022B3
+S315080028289A629A6A22F400229A620120704703F192
+S31508002838784303F501339A6A42F480129A629A6ACF
+S3150800284822F480129A620120704703F1784303F54F
+S3150800285800339A6A42F400129A629A6A22F40012BB
+S315080028689A620120704703F1784303F5FE339A6AA2
+S3150800287842F480029A629A6A22F480029A620120D5
+S31508002888704700BF0004004800080048000C0048CC
+S31508002898001000480014004800100240F0B40C6804
+S315080028A894FAA4F4B4FA84F42BE08E68826893FA4E
+S315080028B8A3F5B5FA85F56D0007FA05F522EA0502C6
+S315080028C893FAA3F5B5FA85F56D0006FA05F52A43D0
+S315080028D8826037E04A69456A1B0A93FAA3F6B6FA8C
+S315080028E886F6B6000F2707FA06F625EA060593FAC6
+S315080028F8A3F3B3FA83F39B0002FA03F32B43436269
+S3150800290801340B6833FA04F250D00122A24013406E
+S31508002918F6D04E68026893FAA3F5B5FA85F56D0000
+S31508002928032707FA05F522EA050293FAA3F5B5FA85
+S3150800293885F56D0006FA05F52A4302604A68013AE4
+S31508002948012AB2D90E69C26893FAA3F5B5FA85F5CC
+S315080029586D00032707FA05F522EA050293FAA3F597
+S31508002968B5FA85F56D0006FA05F52A43C2604A6880
+S31508002978022AC5D193FAA3F2B2FA82F2072AA9D88B
+S315080029884D69026A93FAA3F6B6FA86F6B6000F27D1
+S3150800299807FA06F622EA060293FAA3F3B3FA83F3CA
+S315080029A89B0005FA03F313430362A9E74A68013A49
+S315080029B8012A02D90120F0BC7047C968426822EA90
+S315080029C8030201FB03F313434360F3E7014B186063
+S315080029D8704700BF0400002098B108B50346D0F830
+S315080029E8140210B10020C3F8140209B1C3F8101272
+S315080029F81846012380F8FC31027000F019FE002001
+S31508002A0808BD0220704710B50446012380F8FC313A
+S31508002A18D0F814325B6801799847204600F06CFEB6
+S31508002A28204600F04DFE002010BD19B1C0F814125A
+S31508002A38002070470220704708B500F04FFE0020B6
+S31508002A4808BD08B5D0F8143223B11B68984718B1E1
+S31508002A58022008BD022008BD002008BD08B5D0F828
+S31508002A6814325B689847002008BD38B5044600F557
+S31508002A780275284600F00DF90123C4F8F431B4F8B4
+S31508002A880E32C4F8F83194F8081201F01F03012B26
+S31508002A980ED03BB1022B10D001F08001204600F081
+S31508002AA858FE03E02946204600F06EFA002038BD95
+S31508002AB82946204600F08CFAF8E72946204600F011
+S31508002AC8A3FAF3E710B5044619BB1346D0F8F42160
+S31508002AD8032A27D1D0F80C11D0F8102191420BD827
+S31508002AE8D0F814321B691BB190F8FC21032A0ED0C2
+S31508002AF8204600F04FFB15E0891AC0F80C118A42E7
+S31508002B0828BF0A4692B2194600F03CFB0AE09847E5
+S31508002B18EEE70A46D0F814329B691BB190F8FC1107
+S31508002B28032901D0002010BD11469847FAE710B5C9
+S31508002B380446002947D11346D0F8F421022A05D0BD
+S31508002B4894F80032012B3AD0002010BDC169026AF8
+S31508002B58914217D88169B1FBF2F302FB13132BB91B
+S31508002B688A4203D8D0F8F831994218D3D4F81432DF
+S31508002B78DB681BB194F8FC21032A1DD0204600F017
+S31508002B8814FBDDE78A1AC26192B2194600F0F2FA16
+S31508002B9800231A461946204600F02AFED0E70022E6
+S31508002BA8114600F0E7FA0021C4F8F8110B460A4660
+S31508002BB8204600F01DFEC3E720469847DEE70023B7
+S31508002BC884F80032C0E70A46D0F814325B69002B4D
+S31508002BD8BAD090F8FC110329B6D111469847B3E73D
+S31508002BE838B5044640230022114600F093FD4025D7
+S31508002BF8C4F810512B4600228021204600F08AFD91
+S31508002C082562012384F8FC31D4F818322BB1D4F89C
+S31508002C1814325B68217920469847002038BD01742C
+S31508002C280020704790F8FC3180F8FD31042380F8BD
+S31508002C38FC310020704790F8FD3180F8FC310020FF
+S31508002C48704708B590F8FC31032B01D0002008BD61
+S31508002C58D0F81432DB69002BF8D09847F6E700233A
+S31508002C6802E00133DBB201300278002AF9D11846AE
+S31508002C7870474B88012B00D0704710B50446C0F83A
+S31508002C880432D0F814329B689847204600F082FA36
+S31508002C9810BD0B7803704B7843708B78CA7803EBB2
+S31508002CA8022343800B794A7903EB022383808B79C5
+S31508002CB8CA7903EB0223C380704710B504468021FE
+S31508002CC800F047FD0021204600F043FD10BD30B551
+S31508002CD883B004460D464A88130A013B062B00F2C0
+S31508002CE88180DFE803F00413277F7F637000D0F83C
+S31508002CF810321B680DF10601007C9847BDF80620BE
+S31508002D0812B1EB88002B71D103B030BD037C43B9EF
+S31508002D18D0F814329B6A0DF10600984702234370CF
+S31508002D28ECE7D0F81432DB6A0DF10600984702235F
+S31508002D384370E3E7D2B2052A34D8DFE802F0030B7A
+S31508002D48131B232BD0F810325B680DF10601007CA3
+S31508002D589847D3E7D0F810329B680DF10601007C36
+S31508002D689847CBE7D0F81032DB680DF10601007CEE
+S31508002D789847C3E7D0F810321B690DF10601007CA5
+S31508002D889847BBE7D0F810325B690DF10601007C5D
+S31508002D989847B3E7D0F810329B690DF10601007C15
+S31508002DA89847ABE72946FFF788FFADE7037C33B9B1
+S31508002DB8D0F814325B6B0DF1060098479EE7294652
+S31508002DC8FFF77BFFA0E7037C43B9D0F814321B6BE7
+S31508002DD80DF106009847072343708FE72946FFF742
+S31508002DE86CFF91E72946FFF768FF8DE79A4228BFE7
+S31508002DF81A46ADF806200146204600F0AEF983E7E4
+S31508002E0838B504468B88E3B9CB88D3B98D7805F0ED
+S31508002E187F0590F8FC31032B0CD080F8FE51294623
+S31508002E2800F0CAFC204600F0B5F935B1022384F84B
+S31508002E38FC3138BDFFF741FF38BD012384F8FC3162
+S31508002E4838BD2046FFF739FF38BD000038B50446B7
+S31508002E580D468978254B1970012909D890F8FC314F
+S31508002E68022B09D0032B1CD02946FFF726FF38BDAD
+S31508002E782946FFF722FF38BD81B14160032380F850
+S31508002E88FC31FFF7DEFD022803D0204600F082F960
+S31508002E9838BD29462046FFF710FF38BD00F07AF9F5
+S31508002EA838BD89B1436899421DD0D9B2FFF7D6FD16
+S31508002EB80E4B197861602046FFF7C3FD02280DD02E
+S31508002EC8204600F067F938BD022380F8FC314160D6
+S31508002ED8FFF7C4FD204600F05DF938BD29462046AF
+S31508002EE8FFF7EBFE38BD00F055F938BDC4080020D9
+S31508002EF808B5CB88012B08D190F8FC31022B07D0EE
+S31508002F08032B0DD0FFF7D9FE08BDFFF7D6FE08BD7F
+S31508002F180146002341F8083F012200F01EF908BDC2
+S31508002F280122011D00F019F908BD08B590F8FC3111
+S31508002F38023B012B0CD80123C360D0F804320BB12D
+S31508002F480323C360022200F10C0100F006F908BD4C
+S31508002F58FFF7B3FE08BD10B5044690F8FC31023BEE
+S31508002F68012B0ED84B88012B00D010BD0023C0F8C2
+S31508002F780432D0F814329B689847204600F00AF9BC
+S31508002F8810BDFFF79AFEF0E708B54B78092B1CD851
+S31508002F98DFE803F012181B151B09051B0F0CFFF7B2
+S31508002FA896FE002008BDFFF72BFFFAE7FFF74EFF4E
+S31508002FB8F7E7FFF79DFFF4E7FFF7B7FFF1E7FFF736
+S31508002FC858FEEEE7FFF7C7FFEBE7FFF776FEE8E7F9
+S31508002FD838B504460D4690F8FC31032B11D10B7908
+S31508002FE8012B03D9FFF769FE002038BDD0F8143243
+S31508002FF89B689847EB88002BF6D1204600F0CAF85C
+S31508003008F2E7FFF75AFEEFE738B505460C468A8811
+S315080030180B7803F06003202B11D0D1B26378012B0B
+S315080030282BD0002B4DD0032B0DD190F8FC31022B59
+S315080030380BD0032B10D02146FFF73FFE03E0D0F84C
+S3150800304814329B689847002038BD0029FBD0802990
+S31508003058F9D000F07EFBF6E7638823B919B1802911
+S3150800306801D000F076FBD5F814329B68214628462D
+S315080030789847284600F08EF8E5E790F8FC31022BC9
+S3150800308805D0032B0AD02146FFF717FEDBE70029F0
+S31508003098D9D08029D7D000F05CFBD4E76388002B09
+S315080030A8D1D111F07F0F03D1284600F073F8CAE78B
+S315080030B800F05DFBD5F814329B68214628469847E8
+S315080030C8F2E790F8FC31022B05D0032B09D02146EC
+S315080030D8FFF7F3FDB7E711F07F0FB4D000F039FB1F
+S315080030E8B1E712F0800F11D101F07F04103400EB1C
+S315080030F804140434284600F048FB70B10123236001
+S3150800310802222146284600F028F89CE701F07F04A9
+S31508003118013400EB04140434ECE700232360EFE7DA
+S31508003128D0B170B50D4616460446FFF798FD01302E
+S31508003138400080B23080287003236B70022307E0B2
+S315080031485A1CD2B20134E9540233DBB20021A9541D
+S3150800315821780029F4D170BD704710B513460222AC
+S31508003168C0F8F4218361C3610A46002100F032FBE6
+S31508003178002010BD08B513460A46002100F02AFBB0
+S31508003188002008BD08B513460A46002100F030FBA2
+S31508003198002008BD08B50423C0F8F43100231A46F0
+S315080031A8194600F017FB002008BD08B50523C0F826
+S315080031B8F43100231A46194600F01AFB002008BD08
+S315080031C81549D1F8883043F47003C1F88830134B91
+S315080031D81A6842F001021A605868114A02405A6091
+S315080031E81A6822F0847222F480321A601A6822F465
+S315080031F880221A605A6822F4FE025A60DA6A22F0B5
+S315080032080F02DA62186B074A02401A6300229A60AC
+S315080032184FF000638B60704700ED00E00010024035
+S315080032280CC07FF8CCFC00FF08B52B4A136823F0BE
+S31508003238070343F002031360136803F00703022B1E
+S3150800324803D06A212548FDF7B1FB254B1A6842F4D5
+S3150800325880221A601A6842F480321A60204B1B686A
+S3150800326813F4003FFAD01E4B5A6822F4741242F43B
+S31508003278E8125A60DA6A22F00F02DA621A6842F02D
+S3150800328880721A60164B1B6813F0007FFAD0144B2D
+S315080032985A6822F0F0025A605A6822F4E06242F448
+S315080032A880625A605A6822F460525A605A6822F054
+S315080032B8030242F002025A60094B5B6803F00C03EA
+S315080032C8082BF9D1064A536823F480035360054846
+S315080032D8FFF77CFB08BD00BF002002408C390008B8
+S315080032E80010024000A24A0408B5FDF79BFEFFF746
+S315080032F89BFF08BD08B5FFF7F7FFFDF787FBFDF746
+S3150800330893FBFCE7F0B58BB01F4B9A6942F00102B4
+S315080033189A619A6902F001020392039A5A6942F479
+S3150800332880025A615A6902F480020292029A5A691C
+S3150800333842F400325A615A6902F400320192019A3B
+S315080033485A6942F400125A615B6903F40013009340
+S31508003358009B4FF480770497012505950024069469
+S3150800336807940894094E04A93046FFF797FAB762F6
+S31508003378049505940223089304A94FF09040FFF793
+S315080033888DFA0BB0F0BD00BF0010024000100048CF
+S3150800339808B50E484FF480738362FFF70DFA4FF0AD
+S315080033A89040FFF709FA0A4B5A6922F400125A6143
+S315080033B85A6922F400325A615A6922F480025A611B
+S315080033C89A6922F001029A6108BD00BF00100048F8
+S315080033D800100240DFF834D0002103E00C4B5B589C
+S315080033E8435004310B480C4B42189A42F6D30B4A01
+S315080033F802E0002342F8043B094B9A42F9D3FFF747
+S31508003408DFFE00F077FAFFF775FFFEE700A0002059
+S31508003418043A000800000020A0000020A0000020B0
+S31508003428D80E0020FEE700002023038000487047D6
+S31508003438400000200A2303800048704760000020E7
+S3150800344808B590F8FC31032B01D0002008BDFDF71C
+S315080034584DFAFAE708B5FDF749FA002008BD08B598
+S315080034680846FDF777FA002008BD000008B50B786E
+S3150800347813F0600F06D14B780A2B14D00B2B17D0F4
+S31508003488062B01D0002008BD4B881B0A212B04D027
+S315080034980B491722FFF761FEF4E7CA88172A28BFDF
+S315080034A817220849F6E701220749FFF756FEE9E712
+S315080034B88B7813B9044A1360E4E7FFF7FEFBE1E7E4
+S315080034C84900002052000020C808002010B504460C
+S315080034D8812100F030F90121204600F02CF900205E
+S315080034E810BD000010B5044640230222812100F0D1
+S315080034F811F9402302220121204600F00BF9402346
+S31508003508034A0121204600F073F9002010BD00BFC8
+S31508003518F008002000487047F00800200268114BA0
+S315080035289A4200D0704700B587B04FF4C05301934C
+S315080035380223029300230393032304930E2305937C
+S3150800354801A94FF09040FDF71BFF074BDA6942F4D3
+S315080035580002DA61DB6903F400030093009B07B0F5
+S315080035685DF804FB005C00400010024008B50268DC
+S31508003578074B9A4200D008BD064AD36923F40003CC
+S31508003588D3614FF4C0514FF09040FDF7C9FFF2E7F9
+S31508003598005C00400010024008B500F55D71D0F8DF
+S315080035A8A403FFF762FA08BD08B5C1EBC102930088
+S315080035B80344D3F8DC21D0F8A403FFF783FA08BD3F
+S315080035C808B5C1EBC102930003449A6BD0F8A4036B
+S315080035D8FFF7ADFA08BD08B5D0F8A403FFF731FB25
+S315080035E808BD10B504460121D0F8A403FFF717FB58
+S315080035F8D4F8A403FFF7F4FA10BD000010B5044682
+S31508003608FDF7A4FCD4F8A403FFF70CFBA36923B1C0
+S31508003618024A136943F00603136110BD00ED00E082
+S3150800362808B5D0F8A403FFF706FBFDF790FC08BD1C
+S3150800363810B504461F48C0F8A443C4F820021E4B18
+S31508003648036008234360022282600023C360026184
+S3150800365883610362FDF7E7FF30BB18230022114692
+S31508003668D4F82002FFF759F8582300228021D4F805
+S315080036782002FFF752F8C02300228121D4F820023D
+S31508003688FFF74BF84FF4887300220121D4F820027B
+S31508003698FFF743F84FF4807300228221D4F82002FA
+S315080036A8FFF73BF8002010BD40F243110348FDF729
+S315080036B87DF9D2E730090020005C004098390008F7
+S315080036C808B5D0F82002FEF71EF818B1022803D06C
+S315080036D8022008BD002008BD012008BD08B5D0F89D
+S315080036E82002FDF7F4FF18B1022803D0022008BD0E
+S315080036F8002008BD012008BD08B5D0F82002FDF74E
+S31508003708ECFF18B1022803D0022008BD002008BD26
+S31508003718012008BD10B51C4613462246D0F82002DB
+S31508003728FEF73BF818B1022803D0022010BD002086
+S3150800373810BD012010BD08B5D0F82002FEF7EEF935
+S3150800374818B1022803D0022008BD002008BD0120B0
+S3150800375808BD08B5D0F82002FEF713FF18B10228ED
+S3150800376803D0022008BD002008BD012008BD08B501
+S31508003778D0F82002FEF762FF18B1022803D002200B
+S3150800378808BD002008BD012008BDD0F8203211F078
+S31508003798800F08D101F07F01C1EBC1018A001344EB
+S315080037A893F8CE01704701F07F01C1EBC1018A0089
+S315080037B8134493F82A00704708B5D0F82002FDF795
+S315080037C8D6FF18B1022803D0022008BD002008BD7C
+S315080037D8012008BD08B5D0F82002FEF75FFB18B12E
+S315080037E8022803D0022008BD002008BD012008BD14
+S315080037F808B5D0F82002FEF794FA18B1022803D0C3
+S31508003808022008BD002008BD012008BD08B5D0F86B
+S315080038182002FEF73AFB08BD08B5012903D00020A7
+S31508003828FDF779FB08BD0120FDF775FB08BD00000B
+S3150800383812230B80004870478800002004230B8059
+S31508003848004870479C00002008B50A4628B1054973
+S315080038580548FFF765FC034808BD02490248FFF713
+S315080038685FFCF8E7D80C0020D839000810B5044CD6
+S315080038780A4621460348FFF753FC204610BD00BFF9
+S31508003888D80C0020C839000808B50A4628B10549E1
+S315080038980548FFF745FC034808BD02490248FFF7F3
+S315080038A83FFCF8E7D80C0020EC39000808B50A46AA
+S315080038B828B105490548FFF733FC034808BD0249FE
+S315080038C80248FFF72DFCF8E7D80C0020A8390008AD
+S315080038D808B50A4628B105490548FFF721FC0348F3
+S315080038E808BD02490248FFF71BFCF8E7D80C002078
+S315080038F8B039000870B50D4E0D4CA41BA410002550
+S31508003908A54209D10B4E0C4C00F018F8A41BA410BC
+S315080039180025A54205D170BD56F8253098470135CA
+S31508003928EEE756F8253098470135F2E7FC390008DE
+S31508003938FC390008FC390008003A0008F8B500BF49
+S31508003948F8BC08BC9E467047F8B500BFF8BC08BC6A
+S309080039589E467047C2
+S3150800395C2E2E2F2E2E2F2E2E2F2E2E2F536F757278
+S3150800396C63652F41524D434D345F53544D333246A4
+S3150800397C332F7573622E63004F70656E424C54007C
+S3150800398C2E2E2F6D61696E2E630000002E2E2F755C
+S3150800399C7362645F636F6E662E63000044656661CE
+S315080039AC756C740057696E5553422042756C6B20C2
+S315080039BC496E746572666163650000004F70656ECA
+S315080039CC424C5420557365720000000057696E55B9
+S315080039DC53422042756C6B2044657669636500001A
+S315080039EC3030303030303030303530430000000065
+S309080039FCAD01000803
+S30908003A008901000822
+S31508003A040400000000127A00ED340008D5340008DA
+S31508003A147534000800000000000000005D3400084A
+S31508003A24673400084934000800000000000000005C
+S31508003A340000000031340008000000003D3400088E
+S31508003A4409022000010100C0320904000002FF0037
+S31508003A540000070581024000FF070501024000FF38
+S31508003A640A06100100000040010000003938000869
+S31508003A744538000875380008513800089138000898
+S31508003A84B5380008D93800081201100100000040B2
+S31508003A94501DAC600001010203010000040309047F
+S705080033DDE2
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/blt_conf.h
new file mode 100644
index 00000000..928cd5fc
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/blt_conf.h
@@ -0,0 +1,185 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Boot\blt_conf.h
+* \brief Bootloader configuration header file.
+* \ingroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef BLT_CONF_H
+#define BLT_CONF_H
+
+/****************************************************************************************
+* C P U D R I V E R C O N F I G U R A T I O N
+****************************************************************************************/
+/* To properly initialize the baudrate clocks of the communication interface, typically
+ * the speed of the crystal oscillator and/or the speed at which the system runs is
+ * needed. Set these through configurables BOOT_CPU_XTAL_SPEED_KHZ and
+ * BOOT_CPU_SYSTEM_SPEED_KHZ, respectively. To enable data exchange with the host that is
+ * not dependent on the targets architecture, the byte ordering needs to be known.
+ * Setting BOOT_CPU_BYTE_ORDER_MOTOROLA to 1 selects big endian mode and 0 selects
+ * little endian mode.
+ *
+ * Set BOOT_CPU_USER_PROGRAM_START_HOOK to 1 if you would like a hook function to be
+ * called the moment the user program is about to be started. This could be used to
+ * de-initialize application specific parts, for example to stop blinking an LED, etc.
+ */
+/** \brief Frequency of the external crystal oscillator. */
+#define BOOT_CPU_XTAL_SPEED_KHZ (8000)
+/** \brief Desired system speed. */
+#define BOOT_CPU_SYSTEM_SPEED_KHZ (72000)
+/** \brief Motorola or Intel style byte ordering. */
+#define BOOT_CPU_BYTE_ORDER_MOTOROLA (0)
+/** \brief Enable/disable hook function call right before user program start. */
+#define BOOT_CPU_USER_PROGRAM_START_HOOK (1)
+
+
+/****************************************************************************************
+* C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N
+****************************************************************************************/
+/* The USB communication interface is selected by setting the BOOT_COM_USB_ENABLE
+ * configurable to 1. The maximum amount of data bytes in a message for data transmission
+ * and reception is set through BOOT_COM_USB_TX_MAX_DATA and BOOT_COM_USB_RX_MAX_DATA,
+ * respectively.
+ *
+ */
+/** \brief Enable/disable USB transport layer. */
+#define BOOT_COM_USB_ENABLE (1)
+/** \brief Configure number of bytes in the target->host data packet. */
+#define BOOT_COM_USB_TX_MAX_DATA (63)
+/** \brief Configure number of bytes in the host->target data packet. */
+#define BOOT_COM_USB_RX_MAX_DATA (63)
+
+
+/* The UART communication interface is selected by setting the BOOT_COM_UART_ENABLE
+ * configurable to 1. Configurable BOOT_COM_UART_BAUDRATE selects the communication speed
+ * in bits/second. The maximum amount of data bytes in a message for data transmission
+ * and reception is set through BOOT_COM_UART_TX_MAX_DATA and BOOT_COM_UART_RX_MAX_DATA,
+ * respectively. It is common for a microcontroller to have more than 1 UART interface
+ * on board. The zero-based BOOT_COM_UART_CHANNEL_INDEX selects the UART interface.
+ *
+ */
+/** \brief Enable/disable UART transport layer. */
+#define BOOT_COM_UART_ENABLE (0)
+/** \brief Configure the desired communication speed. */
+#define BOOT_COM_UART_BAUDRATE (57600)
+/** \brief Configure number of bytes in the target->host data packet. */
+#define BOOT_COM_UART_TX_MAX_DATA (64)
+/** \brief Configure number of bytes in the host->target data packet. */
+#define BOOT_COM_UART_RX_MAX_DATA (64)
+/** \brief Select the desired UART peripheral as a zero based index. */
+#define BOOT_COM_UART_CHANNEL_INDEX (1)
+
+
+/****************************************************************************************
+* B A C K D O O R E N T R Y C O N F I G U R A T I O N
+****************************************************************************************/
+/* It is possible to implement an application specific method to force the bootloader to
+ * stay active after a reset. Such a backdoor entry into the bootloader is desired in
+ * situations where the user program does not run properly and therefore cannot
+ * reactivate the bootloader. By enabling these hook functions, the application can
+ * implement the backdoor, which overrides the default backdoor entry that is programmed
+ * into the bootloader. When desired for security purposes, these hook functions can
+ * also be implemented in a way that disables the backdoor entry altogether.
+ */
+/** \brief Enable/disable the backdoor override hook functions. */
+#define BOOT_BACKDOOR_HOOKS_ENABLE (0)
+
+#if (BOOT_COM_USB_ENABLE > 0)
+/* For a USB bootloader, the backdoor needs to stay open long enough for the USB device
+ * to enumerate on the host PC. Therefore it needs to be set a bit longer than the
+ * default value, which is done here by overriding the macro. Note that this won't be
+ * long enough for a first time USB driver install on the host PC. In this case the
+ * bootloader should be started with the backup backdoor that uses a digital input to
+ * for the bootloader to stay active. Refer to CpuUserProgramStartHook() to determine
+ * the digital input to use for this.
+ */
+#define BOOT_BACKDOOR_ENTRY_TIMEOUT_MS (2000)
+#endif
+
+
+/****************************************************************************************
+* N O N - V O L A T I L E M E M O R Y D R I V E R C O N F I G U R A T I O N
+****************************************************************************************/
+/* The NVM driver typically supports erase and program operations of the internal memory
+ * present on the microcontroller. Through these hook functions the NVM driver can be
+ * extended to support additional memory types such as external flash memory and serial
+ * eeproms. The size of the internal memory in kilobytes is specified with configurable
+ * BOOT_NVM_SIZE_KB. If desired the internal checksum writing and verification method can
+ * be overridden with a application specific method by enabling configuration switch
+ * BOOT_NVM_CHECKSUM_HOOKS_ENABLE.
+ */
+/** \brief Enable/disable the NVM hook function for supporting additional memory devices. */
+#define BOOT_NVM_HOOKS_ENABLE (0)
+/** \brief Configure the size of the default memory device (typically flash EEPROM). */
+#define BOOT_NVM_SIZE_KB (256)
+/** \brief Enable/disable hooks functions to override the user program checksum handling. */
+#define BOOT_NVM_CHECKSUM_HOOKS_ENABLE (0)
+
+
+/****************************************************************************************
+* F L A S H M E M O R Y D R I V E R C O N F I G U R A T I O N
+****************************************************************************************/
+/** \brief Enable support for a custom flash layout table. It is located in
+ * flash_layout.c. This was done because the default flashLayout[] table
+ * in the bootloader's core has more flash memory reserved for the bootloader
+ * than is needed for this demo.
+ */
+#define BOOT_FLASH_CUSTOM_LAYOUT_ENABLE (1)
+
+
+/****************************************************************************************
+* W A T C H D O G D R I V E R C O N F I G U R A T I O N
+****************************************************************************************/
+/* The COP driver cannot be configured internally in the bootloader, because its use
+ * and configuration is application specific. The bootloader does need to service the
+ * watchdog in case it is used. When the application requires the use of a watchdog,
+ * set BOOT_COP_HOOKS_ENABLE to be able to initialize and service the watchdog through
+ * hook functions.
+ */
+/** \brief Enable/disable the hook functions for controlling the watchdog. */
+#define BOOT_COP_HOOKS_ENABLE (1)
+
+
+/****************************************************************************************
+* S E E D / K E Y S E C U R I T Y C O N F I G U R A T I O N
+****************************************************************************************/
+/* A security mechanism can be enabled in the bootloader's XCP module by setting configu-
+ * rable BOOT_XCP_SEED_KEY_ENABLE to 1. Before any memory erase or programming
+ * operations can be performed, access to this resource need to be unlocked.
+ * In the Microboot settings on tab "XCP Protection" you need to specify a DLL that
+ * implements the unlocking algorithm. The demo programs are configured for the (simple)
+ * algorithm in "FeaserKey.dll". The source code for this DLL is available so it can be
+ * customized to your needs.
+ * During the unlock sequence, Microboot requests a seed from the bootloader, which is in
+ * the format of a byte array. Using this seed the unlock algorithm in the DLL computes
+ * a key, which is also a byte array, and sends this back to the bootloader. The
+ * bootloader then verifies this key to determine if programming and erase operations are
+ * permitted.
+ * After enabling this feature the hook functions XcpGetSeedHook() and XcpVerifyKeyHook()
+ * are called by the bootloader to obtain the seed and to verify the key, respectively.
+ */
+#define BOOT_XCP_SEED_KEY_ENABLE (0)
+
+
+#endif /* BLT_CONF_H */
+/*********************************** end of blt_conf.h *********************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/boot.dox b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/boot.dox
new file mode 100644
index 00000000..3f6a8a44
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/boot.dox
@@ -0,0 +1,7 @@
+/**
+\defgroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio Bootloader
+\brief Bootloader.
+\ingroup ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+*/
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/flash_layout.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/flash_layout.c
new file mode 100644
index 00000000..f2d24165
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/flash_layout.c
@@ -0,0 +1,62 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Boot\flash_layout.c
+* \brief Custom flash layout table source file.
+* \ingroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2016 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/** \brief Array wit the layout of the flash memory.
+ * \details Also controls what part of the flash memory is reserved for the bootloader.
+ * If the bootloader size changes, the reserved sectors for the bootloader
+ * might need adjustment to make sure the bootloader doesn't get overwritten.
+ */
+static const tFlashSector flashLayout[] =
+{
+ /* space is reserved for a bootloader configuration with all supported communication
+ * interfaces enabled. when for example only UART is needed, then the space required
+ * for the bootloader can be made a lot smaller here.
+ */
+ /* { 0x08000000, 0x00800 }, flash sector 0 - 2kb (reserved for bootloader)*/
+ /* { 0x08000800, 0x00800 }, flash sector 1 - 2kb (reserved for bootloader)*/
+ /* { 0x08001000, 0x00800 }, flash sector 2 - 2kb (reserved for bootloader)*/
+ /* { 0x08001800, 0x00800 }, flash sector 3 - 2kb (reserved for bootloader)*/
+ /*{ 0x08002000, 0x00800 }, flash sector 4 - 2kb (reserved for bootloader)*/
+ /*{ 0x08002800, 0x00800 }, flash sector 5 - 2kb (reserved for bootloader)*/
+ /*{ 0x08003000, 0x00800 }, flash sector 6 - 2kb (reserved for bootloader)*/
+ /*{ 0x08003800, 0x00800 }, flash sector 7 - 2kb (reserved for bootloader)*/
+ { 0x08004000, 0x00800 }, /* flash sector 8 - 2kb */
+ { 0x08004800, 0x00800 }, /* flash sector 9 - 2kb */
+ { 0x08005000, 0x00800 }, /* flash sector 10 - 2kb */
+ { 0x08005800, 0x00800 }, /* flash sector 11 - 2kb */
+ { 0x08006000, 0x00800 }, /* flash sector 12 - 2kb */
+ { 0x08006800, 0x00800 }, /* flash sector 13 - 2kb */
+ { 0x08007000, 0x00800 }, /* flash sector 14 - 2kb */
+ { 0x08007800, 0x00800 }, /* flash sector 15 - 2kb */
+ { 0x08008000, 0x08000 }, /* flash sectors 16 to 31 - 32kb */
+ { 0x08010000, 0x10000 }, /* flash sectors 32 to 63 - 64kb */
+ { 0x08020000, 0x20000 }, /* flash sectors 64 to 127 - 128kb */
+};
+
+
+/*********************************** end of flash_layout.c *****************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/hooks.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/hooks.c
new file mode 100644
index 00000000..842f093b
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/hooks.c
@@ -0,0 +1,376 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Boot\hooks.c
+* \brief Bootloader callback source file.
+* \ingroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "boot.h" /* bootloader generic header */
+#include "led.h" /* LED driver header */
+#include "stm32f3xx.h" /* STM32 CPU and HAL header */
+#include "stm32f3xx_ll_gpio.h" /* STM32 LL GPIO header */
+
+
+/****************************************************************************************
+* C P U D R I V E R H O O K F U N C T I O N S
+****************************************************************************************/
+
+#if (BOOT_CPU_USER_PROGRAM_START_HOOK > 0)
+/************************************************************************************//**
+** \brief Callback that gets called when the bootloader is about to exit and
+** hand over control to the user program. This is the last moment that
+** some final checking can be performed and if necessary prevent the
+** bootloader from activiting the user program.
+** \return BLT_TRUE if it is okay to start the user program, BLT_FALSE to keep
+** keep the bootloader active.
+**
+****************************************************************************************/
+blt_bool CpuUserProgramStartHook(void)
+{
+ /* additional and optional backdoor entry through the pushbutton on the board. to
+ * force the bootloader to stay active after reset, keep the pushbutton pressed
+ * during reset.
+ */
+ if (LL_GPIO_IsInputPinSet(GPIOA, LL_GPIO_PIN_0) != 0)
+ {
+ /* pushbutton pressed, so do not start the user program and keep the
+ * bootloader active instead.
+ */
+ return BLT_FALSE;
+ }
+ /* clean up the LED driver */
+ LedBlinkExit();
+ /* okay to start the user program.*/
+ return BLT_TRUE;
+} /*** end of CpuUserProgramStartHook ***/
+#endif /* BOOT_CPU_USER_PROGRAM_START_HOOK > 0 */
+
+
+/****************************************************************************************
+* U S B C O M M U N I C A T I O N I N T E R F A C E H O O K F U N C T I O N S
+****************************************************************************************/
+
+#if (BOOT_COM_USB_ENABLE > 0)
+/************************************************************************************//**
+** \brief Callback that gets called whenever the USB device should be connected
+** to the USB bus.
+** \param connect BLT_TRUE to connect and BLT_FALSE to disconnect.
+** \return none.
+**
+****************************************************************************************/
+void UsbConnectHook(blt_bool connect)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ if (connect == BLT_TRUE)
+ {
+ /* To connect the USB device to the USB bus, a pull-up needs to be enabled on the
+ * USB_DP line, such that it provides a logic high signal to the host. On the
+ * STM32F3-Discovery board, there is already a pull-up that is always enabled. This
+ * means that the USB_DP line is already high as long as it is not explicitely
+ * configured as a digital output and set to logic low. Function HAL_PCD_MspInit()
+ * already properly configures the USB_DP pin for USB operation, so nothing more
+ * need to be done here.
+ */
+ }
+ else
+ {
+ /* To disconnect the USB device from the USB bus, the USB_DP line needs to go to
+ * logic low. On the STM32F3-Discovery board, there is a pullup on this line that is
+ * always enabled. This means that there is only one way to make the USB_DP go logic
+ * low, which is by reconfiguring the pin as a digital output and setting it low.
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
+ }
+} /*** end of UsbConnect ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called whenever the USB host requests the device
+** to enter a low power mode.
+** \return none.
+**
+****************************************************************************************/
+void UsbEnterLowPowerModeHook(void)
+{
+ /* support to enter a low power mode can be implemented here */
+} /*** end of UsbEnterLowPowerMode ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called whenever the USB host requests the device to
+** exit low power mode.
+** \return none.
+**
+****************************************************************************************/
+void UsbLeaveLowPowerModeHook(void)
+{
+ /* support to leave a low power mode can be implemented here */
+} /*** end of UsbLeaveLowPowerMode ***/
+#endif /* BOOT_COM_USB_ENABLE > 0 */
+
+
+/****************************************************************************************
+* W A T C H D O G D R I V E R H O O K F U N C T I O N S
+****************************************************************************************/
+
+#if (BOOT_COP_HOOKS_ENABLE > 0)
+/************************************************************************************//**
+** \brief Callback that gets called at the end of the internal COP driver
+** initialization routine. It can be used to configure and enable the
+** watchdog.
+** \return none.
+**
+****************************************************************************************/
+void CopInitHook(void)
+{
+ /* this function is called upon initialization. might as well use it to initialize
+ * the LED driver. It is kind of a visual watchdog anyways.
+ */
+ LedBlinkInit(100);
+} /*** end of CopInitHook ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called at the end of the internal COP driver
+** service routine. This gets called upon initialization and during
+** potential long lasting loops and routine. It can be used to service
+** the watchdog to prevent a watchdog reset.
+** \return none.
+**
+****************************************************************************************/
+void CopServiceHook(void)
+{
+ /* run the LED blink task. this is a better place to do it than in the main() program
+ * loop. certain operations such as flash erase can take a long time, which would cause
+ * a blink interval to be skipped. this function is also called during such operations,
+ * so no blink intervals will be skipped when calling the LED blink task here.
+ */
+ LedBlinkTask();
+} /*** end of CopServiceHook ***/
+#endif /* BOOT_COP_HOOKS_ENABLE > 0 */
+
+
+/****************************************************************************************
+* B A C K D O O R E N T R Y H O O K F U N C T I O N S
+****************************************************************************************/
+
+#if (BOOT_BACKDOOR_HOOKS_ENABLE > 0)
+/************************************************************************************//**
+** \brief Initializes the backdoor entry option.
+** \return none.
+**
+****************************************************************************************/
+void BackDoorInitHook(void)
+{
+} /*** end of BackDoorInitHook ***/
+
+
+/************************************************************************************//**
+** \brief Checks if a backdoor entry is requested.
+** \return BLT_TRUE if the backdoor entry is requested, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+blt_bool BackDoorEntryHook(void)
+{
+ /* default implementation always activates the bootloader after a reset */
+ return BLT_TRUE;
+} /*** end of BackDoorEntryHook ***/
+#endif /* BOOT_BACKDOOR_HOOKS_ENABLE > 0 */
+
+
+/****************************************************************************************
+* N O N - V O L A T I L E M E M O R Y D R I V E R H O O K F U N C T I O N S
+****************************************************************************************/
+
+#if (BOOT_NVM_HOOKS_ENABLE > 0)
+/************************************************************************************//**
+** \brief Callback that gets called at the start of the internal NVM driver
+** initialization routine.
+** \return none.
+**
+****************************************************************************************/
+void NvmInitHook(void)
+{
+} /*** end of NvmInitHook ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called at the start of a firmware update to reinitialize
+** the NVM driver.
+** \return none.
+**
+****************************************************************************************/
+void NvmReinitHook(void)
+{
+} /*** end of NvmReinitHook ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called at the start of the NVM driver write
+** routine. It allows additional memory to be operated on. If the address
+** is not within the range of the additional memory, then
+** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the data hasn't
+** been written yet.
+** \param addr Start address.
+** \param len Length in bytes.
+** \param data Pointer to the data buffer.
+** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
+** not within the supported memory range, or BLT_NVM_ERROR is the write
+** operation failed.
+**
+****************************************************************************************/
+blt_int8u NvmWriteHook(blt_addr addr, blt_int32u len, blt_int8u *data)
+{
+ return BLT_NVM_NOT_IN_RANGE;
+} /*** end of NvmWriteHook ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called at the start of the NVM driver erase
+** routine. It allows additional memory to be operated on. If the address
+** is not within the range of the additional memory, then
+** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the memory
+** hasn't been erased yet.
+** \param addr Start address.
+** \param len Length in bytes.
+** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
+** not within the supported memory range, or BLT_NVM_ERROR is the erase
+** operation failed.
+**
+****************************************************************************************/
+blt_int8u NvmEraseHook(blt_addr addr, blt_int32u len)
+{
+ return BLT_NVM_NOT_IN_RANGE;
+} /*** end of NvmEraseHook ***/
+
+
+/************************************************************************************//**
+** \brief Callback that gets called at the end of the NVM programming session.
+** \return BLT_TRUE is successful, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+blt_bool NvmDoneHook(void)
+{
+ return BLT_TRUE;
+} /*** end of NvmDoneHook ***/
+#endif /* BOOT_NVM_HOOKS_ENABLE > 0 */
+
+
+#if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0)
+/************************************************************************************//**
+** \brief Verifies the checksum, which indicates that a valid user program is
+** present and can be started.
+** \return BLT_TRUE if successful, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+blt_bool NvmVerifyChecksumHook(void)
+{
+ return BLT_TRUE;
+} /*** end of NvmVerifyChecksum ***/
+
+
+/************************************************************************************//**
+** \brief Writes a checksum of the user program to non-volatile memory. This is
+** performed once the entire user program has been programmed. Through
+** the checksum, the bootloader can check if a valid user programming is
+** present and can be started.
+** \return BLT_TRUE if successful, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+blt_bool NvmWriteChecksumHook(void)
+{
+ return BLT_TRUE;
+}
+#endif /* BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0 */
+
+
+/****************************************************************************************
+* S E E D / K E Y S E C U R I T Y H O O K F U N C T I O N S
+****************************************************************************************/
+
+#if (BOOT_XCP_SEED_KEY_ENABLE > 0)
+/************************************************************************************//**
+** \brief Provides a seed to the XCP master that will be used for the key
+** generation when the master attempts to unlock the specified resource.
+** Called by the GET_SEED command.
+** \param resource Resource that the seed if requested for (XCP_RES_XXX).
+** \param seed Pointer to byte buffer wher the seed will be stored.
+** \return Length of the seed in bytes.
+**
+****************************************************************************************/
+blt_int8u XcpGetSeedHook(blt_int8u resource, blt_int8u *seed)
+{
+ /* request seed for unlocking ProGraMming resource */
+ if ((resource & XCP_RES_PGM) != 0)
+ {
+ seed[0] = 0x55;
+ }
+
+ /* return seed length */
+ return 1;
+} /*** end of XcpGetSeedHook ***/
+
+
+/************************************************************************************//**
+** \brief Called by the UNLOCK command and checks if the key to unlock the
+** specified resource was correct. If so, then the resource protection
+** will be removed.
+** \param resource resource to unlock (XCP_RES_XXX).
+** \param key pointer to the byte buffer holding the key.
+** \param len length of the key in bytes.
+** \return 1 if the key was correct, 0 otherwise.
+**
+****************************************************************************************/
+blt_int8u XcpVerifyKeyHook(blt_int8u resource, blt_int8u *key, blt_int8u len)
+{
+ /* suppress compiler warning for unused parameter */
+ len = len;
+
+ /* the example key algorithm in "FeaserKey.dll" works as follows:
+ * - PGM will be unlocked if key = seed - 1
+ */
+
+ /* check key for unlocking ProGraMming resource */
+ if ((resource == XCP_RES_PGM) && (key[0] == (0x55-1)))
+ {
+ /* correct key received for unlocking PGM resource */
+ return 1;
+ }
+
+ /* still here so key incorrect */
+ return 0;
+} /*** end of XcpVerifyKeyHook ***/
+#endif /* BOOT_XCP_SEED_KEY_ENABLE > 0 */
+
+
+/*********************************** end of hooks.c ************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/led.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/led.c
new file mode 100644
index 00000000..800e6e08
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/led.c
@@ -0,0 +1,101 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Boot\led.c
+* \brief LED driver source file.
+* \ingroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "boot.h" /* bootloader generic header */
+#include "led.h" /* module header */
+#include "stm32f3xx.h" /* STM32 CPU and HAL header */
+#include "stm32f3xx_ll_gpio.h" /* STM32 LL GPIO header */
+
+
+/****************************************************************************************
+* Local data declarations
+****************************************************************************************/
+/** \brief Holds the desired LED blink interval time. */
+static blt_int16u ledBlinkIntervalMs;
+
+
+/************************************************************************************//**
+** \brief Initializes the LED blink driver.
+** \param interval_ms Specifies the desired LED blink interval time in milliseconds.
+** \return none.
+**
+****************************************************************************************/
+void LedBlinkInit(blt_int16u interval_ms)
+{
+ /* store the interval time between LED toggles */
+ ledBlinkIntervalMs = interval_ms;
+} /*** end of LedBlinkInit ***/
+
+
+/************************************************************************************//**
+** \brief Task function for blinking the LED as a fixed timer interval.
+** \return none.
+**
+****************************************************************************************/
+void LedBlinkTask(void)
+{
+ static blt_bool ledOn = BLT_FALSE;
+ static blt_int32u nextBlinkEvent = 0;
+
+ /* check for blink event */
+ if (TimerGet() >= nextBlinkEvent)
+ {
+ /* toggle the LED state */
+ if (ledOn == BLT_FALSE)
+ {
+ ledOn = BLT_TRUE;
+ LL_GPIO_SetOutputPin(GPIOE, LL_GPIO_PIN_8);
+ }
+ else
+ {
+ ledOn = BLT_FALSE;
+ LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
+ }
+ /* schedule the next blink event */
+ nextBlinkEvent = TimerGet() + ledBlinkIntervalMs;
+ }
+} /*** end of LedBlinkTask ***/
+
+
+/************************************************************************************//**
+** \brief Cleans up the LED blink driver. This is intended to be used upon program
+** exit.
+** \return none.
+**
+****************************************************************************************/
+void LedBlinkExit(void)
+{
+ /* turn the LED off */
+ LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
+} /*** end of LedBlinkExit ***/
+
+
+/*********************************** end of led.c **************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/led.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/led.h
new file mode 100644
index 00000000..9b63b4d1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/led.h
@@ -0,0 +1,40 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Boot\led.h
+* \brief LED driver header file.
+* \ingroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef LED_H
+#define LED_H
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void LedBlinkInit(blt_int16u interval_ms);
+void LedBlinkTask(void);
+void LedBlinkExit(void);
+
+
+#endif /* LED_H */
+/*********************************** end of led.h **************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Device/ST/STM32F3xx/Include/stm32f303xc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Device/ST/STM32F3xx/Include/stm32f303xc.h
new file mode 100644
index 00000000..ec70ffd2
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Device/ST/STM32F3xx/Include/stm32f303xc.h
@@ -0,0 +1,13397 @@
+/**
+ ******************************************************************************
+ * @file stm32f303xc.h
+ * @author MCD Application Team
+ * @brief CMSIS STM32F303xC Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ *
© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f303xc
+ * @{
+ */
+
+#ifndef __STM32F303xC_H
+#define __STM32F303xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F303xC devices provide an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F303xC devices use 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1U /*!< STM32F303xC devices provide an FPU */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F303xC devices Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M4 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line 19 */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line 20 */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_TSC_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Controller Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */
+ ADC1_2_IRQn = 18, /*!< ADC1 & ADC2 Interrupts */
+ USB_HP_CAN_TX_IRQn = 19, /*!< USB Device High Priority or CAN TX Interrupts */
+ USB_LP_CAN_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN RX0 Interrupts */
+ CAN_RX1_IRQn = 21, /*!< CAN RX1 Interrupt */
+ CAN_SCE_IRQn = 22, /*!< CAN SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt & EXTI Line24 Interrupt (I2C2 wakeup) */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt & EXTI Line28 Interrupt (USART3 wakeup) */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line 17 Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Wakeup Interrupt */
+ TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */
+ TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */
+ TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt & EXTI Line34 Interrupt (UART4 wakeup) */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt & EXTI Line35 Interrupt (UART5 wakeup) */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC underrun error Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ ADC4_IRQn = 61, /*!< ADC4 global Interrupt */
+ COMP1_2_3_IRQn = 64, /*!< COMP1, COMP2 and COMP3 global Interrupt via EXTI Line21, 22 and 29*/
+ COMP4_5_6_IRQn = 65, /*!< COMP4, COMP5 and COMP6 global Interrupt via EXTI Line30, 31 and 32*/
+ COMP7_IRQn = 66, /*!< COMP7 global Interrupt via EXTI Line33 */
+ USB_HP_IRQn = 74, /*!< USB High Priority global Interrupt */
+ USB_LP_IRQn = 75, /*!< USB Low Priority global Interrupt */
+ USBWakeUp_RMP_IRQn = 76, /*!< USB Wakeup Interrupt remap */
+ FPU_IRQn = 81, /*!< Floating point Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f3xx.h" /* STM32F3xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */
+ uint32_t RESERVED0; /*!< Reserved, 0x010 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x01C */
+ __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x02C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x044 */
+ uint32_t RESERVED4; /*!< Reserved, 0x048 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */
+ uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1/3 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief Analog Comparators
+ */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx
+ * @{
+ */
+
+#ifndef __STM32F3xx_H
+#define __STM32F3xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F3)
+#define STM32F3
+#endif /* STM32F3 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \
+ !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \
+ !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \
+ !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \
+ !defined (STM32F373xC) && !defined (STM32F378xx)
+
+ /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
+ STM32F301R6 and STM32F301R8 Devices */
+ /* #define STM32F302x8 */ /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
+ STM32F302R6 and STM32F302R8 Devices */
+ /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC,
+ STM32F302VB and STM32F302VC Devices */
+ /* #define STM32F302xE */ /*!< STM32F302RE, STM32F302VE, STM32F302ZE, STM32F302RD,
+ STM32F302VD and STM32F302ZD Devices */
+ /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8,
+ STM32F303R6 and STM32F303R8 Devices */
+ /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC,
+ STM32F303VB and STM32F303VC Devices */
+ /* #define STM32F303xE */ /*!< STM32F303RE, STM32F303VE, STM32F303ZE, STM32F303RD,
+ STM32F303VD and STM32F303ZD Devices */
+ /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC,
+ STM32F373R8, STM32F373RB, STM32F373RC,
+ STM32F373V8, STM32F373VB and STM32F373VC Devices */
+ /* #define STM32F334x8 */ /*!< STM32F334K4, STM32F334K6, STM32F334K8,
+ STM32F334C4, STM32F334C6, STM32F334C8,
+ STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
+ /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
+ /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
+ /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
+ /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
+ /* #define STM32F398xx */ /*!< STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.3.2
+ */
+#define __STM32F3_CMSIS_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F3_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F3_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
+#define __STM32F3_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F3_CMSIS_VERSION ((__STM32F3_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F3_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F3_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F3_CMSIS_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F301x8)
+ #include "stm32f301x8.h"
+#elif defined(STM32F302x8)
+ #include "stm32f302x8.h"
+#elif defined(STM32F302xC)
+ #include "stm32f302xc.h"
+#elif defined(STM32F302xE)
+ #include "stm32f302xe.h"
+#elif defined(STM32F303x8)
+ #include "stm32f303x8.h"
+#elif defined(STM32F303xC)
+ #include "stm32f303xc.h"
+#elif defined(STM32F303xE)
+ #include "stm32f303xe.h"
+#elif defined(STM32F373xC)
+ #include "stm32f373xc.h"
+#elif defined(STM32F334x8)
+ #include "stm32f334x8.h"
+#elif defined(STM32F318xx)
+ #include "stm32f318xx.h"
+#elif defined(STM32F328xx)
+ #include "stm32f328xx.h"
+#elif defined(STM32F358xx)
+ #include "stm32f358xx.h"
+#elif defined(STM32F378xx)
+ #include "stm32f378xx.h"
+#elif defined(STM32F398xx)
+ #include "stm32f398xx.h"
+#else
+ #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f3xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F3xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Device/ST/STM32F3xx/Include/system_stm32f3xx.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Device/ST/STM32F3xx/Include/system_stm32f3xx.h
new file mode 100644
index 00000000..3670bcff
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Device/ST/STM32F3xx/Include/system_stm32f3xx.h
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F3xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F3XX_H
+#define __SYSTEM_STM32F3XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F3xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F3xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F3XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_common_tables.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_common_tables.h
new file mode 100644
index 00000000..d5d72417
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_common_tables.h
@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. October 2015
+* $Revision: V.1.4.5 a
+*
+* Project: CMSIS DSP Library
+* Title: arm_common_tables.h
+*
+* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+/* extern const q31_t realCoefAQ31[1024]; */
+/* extern const q31_t realCoefBQ31[1024]; */
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /* ARM_COMMON_TABLES_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_const_structs.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_const_structs.h
new file mode 100644
index 00000000..54595f55
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_const_structs.h
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. March 2015
+* $Revision: V.1.4.5
+*
+* Project: CMSIS DSP Library
+* Title: arm_const_structs.h
+*
+* Description: This file has constant structs that are initialized for
+* user convenience. For example, some can be given as
+* arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_math.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_math.h
new file mode 100644
index 00000000..580cbbde
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/arm_math.h
@@ -0,0 +1,7154 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date: 20. October 2015
+* $Revision: V1.4.5 b
+*
+* Project: CMSIS DSP Library
+* Title: arm_math.h
+*
+* Description: Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * Introduction
+ * ------------
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of functions each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * Using the Library
+ * ------------
+ *
+ * The library installer contains prebuilt versions of the libraries in the Lib
folder.
+ * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+ * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+ *
+ * The library functions are declared in the public file arm_math.h
which is placed in the Include
folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file arm_math.h
for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+ *
+ * Examples
+ * --------
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * Toolchain Support
+ * ------------
+ *
+ * The library has been developed and tested with MDK-ARM version 5.14.0.0
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * Building the Library
+ * ------------
+ *
+ * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM
folder.
+ * - arm_cortexM_math.uvprojx
+ *
+ *
+ * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+ *
+ * Pre-processor Macros
+ * ------------
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * - UNALIGNED_SUPPORT_DISABLE:
+ *
+ * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+ *
+ * - ARM_MATH_BIG_ENDIAN:
+ *
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * - ARM_MATH_MATRIX_CHECK:
+ *
+ * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+ *
+ * - ARM_MATH_ROUNDING:
+ *
+ * Define macro ARM_MATH_ROUNDING for rounding on support functions
+ *
+ * - ARM_MATH_CMx:
+ *
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+ * ARM_MATH_CM7 for building the library on cortex-M7.
+ *
+ * - __FPU_PRESENT:
+ *
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ *
+ * CMSIS-DSP in ARM::CMSIS Pack
+ * -----------------------------
+ *
+ * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories:
+ * |File/Folder |Content |
+ * |------------------------------|------------------------------------------------------------------------|
+ * |\b CMSIS\\Documentation\\DSP | This documentation |
+ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
+ * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
+ * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
+ *
+ *
+ * Revision History of CMSIS-DSP
+ * ------------
+ * Please refer to \ref ChangeLog_pg.
+ *
+ * Copyright Notice
+ * ------------
+ *
+ * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size numRows X numCols
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ *
+ * pData[i*numCols + j]
+ *
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function arm_mat_init_f32()
, arm_mat_init_q31()
+ * and arm_mat_init_q15()
for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ *
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows
specifies the number of rows, nColumns
+ * specifies the number of columns, and pData
points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ *
+ * ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return
+ *
+ * ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ *
+ * ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return ARM_MATH_SUCCESS
.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+ #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+ #define ARM_MATH_CM0_FAMILY
+#elif defined (ARM_MATH_CM0PLUS)
+ #include "core_cm0plus.h"
+ #define ARM_MATH_CM0_FAMILY
+#else
+ #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#ifndef PI
+#define PI 3.14159265358979f
+#endif
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define FAST_MATH_TABLE_SIZE 512
+#define FAST_MATH_Q31_SHIFT (32 - 10)
+#define FAST_MATH_Q15_SHIFT (16 - 10)
+#define CONTROLLER_Q31_SHIFT (32 - 9)
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x400000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+ /**
+ * @brief Macro for Unaligned Support
+ */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+ #define ALIGN4
+#else
+ #if defined (__GNUC__)
+ #define ALIGN4 __attribute__((aligned(4)))
+ #else
+ #define ALIGN4 __align(4)
+ #endif
+#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#if defined __CC_ARM
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __GNUC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __ICCARM__
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED
+
+#elif defined __CSMC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED
+
+#elif defined __TASKING__
+ #define __SIMD32_TYPE __unaligned int32_t
+ #define CMSIS_UNUSED
+
+#else
+ #error Unknown compiler
+#endif
+
+#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
+#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
+#define __SIMD64(addr) (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
+ (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+/*
+ #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
+ #define __CLZ __clz
+ #endif
+ */
+/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
+ static __INLINE uint32_t __CLZ(
+ q31_t data);
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return (count);
+ }
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+ q31_t out;
+ uint32_t tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t) (__CLZ( in) - 1));
+ }
+ else
+ {
+ signBits = ((uint32_t) (__CLZ(-in) - 1));
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 24);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q63_t) in * out) >> 31);
+ tempVal = 0x7FFFFFFFu - tempVal;
+ /* 1.31 with exp 1 */
+ /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */
+ out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+ }
+
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+ q15_t out = 0;
+ uint32_t tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t)(__CLZ( in) - 17));
+ }
+ else
+ {
+ signBits = ((uint32_t)(__CLZ(-in) - 17));
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 8);
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFFu - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0_FAMILY)
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+ }
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */
+ q31_t r = 0, s = 0;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSDX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUADX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE int32_t __QADD(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE int32_t __QSUB(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLAD(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLADX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLSDX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALD(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALDX(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUAD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SXTB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SXTB16(
+ uint32_t x)
+ {
+ return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) |
+ ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) ));
+ }
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] S points to an instance of the Q7 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] S points to an instance of the Q15 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * numTaps
is not a supported value.
+ */
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] S points to an instance of the Q31 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] S points to an instance of the floating-point FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q15;
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_casd_df1_inst_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float64_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f64;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q31;
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Q31, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t * pData);
+
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t * pData);
+
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t * pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+ q15_t A1;
+ q15_t A2;
+#else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the q15 PID Control structure
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues; /**< nValues */
+ float32_t x1; /**< x1 */
+ float32_t xSpacing; /**< xSpacing */
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q15(
+ arm_cfft_radix2_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q15(
+ const arm_cfft_radix2_instance_q15 * S,
+ q15_t * pSrc);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q31(
+ arm_cfft_radix2_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q31(
+ const arm_cfft_radix2_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_f32(
+ arm_cfft_radix2_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_f32(
+ const arm_cfft_radix2_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q15;
+
+void arm_cfft_q15(
+ const arm_cfft_instance_q15 * S,
+ q15_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q31;
+
+void arm_cfft_q31(
+ const arm_cfft_instance_q31 * S,
+ q31_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_f32;
+
+ void arm_cfft_f32(
+ const arm_cfft_instance_f32 * S,
+ float32_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+typedef struct
+ {
+ arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
+ uint16_t fftLenRFFT; /**< length of the real sequence */
+ float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
+ } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+ arm_rfft_fast_instance_f32 * S,
+ uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+ arm_rfft_fast_instance_f32 * S,
+ float32_t * p, float32_t * pOut,
+ uint8_t ifftFlag);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal
is not a supported transform length.
+ */
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N
is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q31 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N
is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q15 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q7 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize
is not a multiple of M
.
+ */
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize
is not a multiple of M
.
+ */
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize
is not a multiple of M
.
+ */
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps
is not a multiple of the interpolation factor L
.
+ */
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps
is not a multiple of the interpolation factor L
.
+ */
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps
is not a multiple of the interpolation factor L
.
+ */
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f64;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_stereo_df2T_f32(
+ const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f64(
+ const arm_biquad_cascade_df2T_instance_f64 * S,
+ float64_t * pSrc,
+ float64_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_stereo_df2T_init_f32(
+ arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f64(
+ arm_biquad_cascade_df2T_instance_f64 * S,
+ uint8_t numStages,
+ float64_t * pCoeffs,
+ float64_t * pState);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pkCoeffs,
+ float32_t * pvCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pkCoeffs,
+ q31_t * pvCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ */
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pkCoeffs,
+ q15_t * pvCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_correlate_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cos output.
+ */
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t * pSinVal,
+ float32_t * pCosVal);
+
+
+ /**
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cosine output.
+ */
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t * pSinVal,
+ q31_t * pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * S
points to an instance of the PID control data structure. in
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ *
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+ __SIMD32_TYPE *vstate;
+
+ /* Implementation of PID controller */
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in);
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ vstate = __SIMD32_CONST(S->state);
+ acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc);
+#else
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0) * in;
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0];
+ acc += (q31_t) S->A2 * S->state[1];
+#endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f64(
+ const arm_matrix_instance_f64 * src,
+ arm_matrix_instance_f64 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic
to calculate currents
+ * in the two-phase orthogonal stator axis Ialpha
and Ibeta
.
+ * When Ialpha
is superposed with Ia
as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and Ia + Ib + Ic = 0
, in this condition Ialpha
and Ibeta
+ * can be calculated using only Ia
and Ib
.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where Ia
and Ib
are the instantaneous stator phases and
+ * pIalpha
and pIbeta
are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ */
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+ }
+
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where pIa
and pIb
are the instantaneous stator phases and
+ * Ialpha
and Ibeta
are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ */
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta;
+ }
+
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the Ialpha
and the Ibeta
currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where Ialpha
and Ibeta
are the stator vector components,
+ * pId
and pIq
are rotor vector components and cosVal
and sinVal
are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+ }
+
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where pIalpha
and pIbeta
are the stator vector components,
+ * Id
and Iq
are rotor vector components and cosVal
and sinVal
are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ */
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ *
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ *
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * S
points to an instance of the Linear Interpolate function data structure.
+ * x
is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (int32_t) ((x - S->x1) / xSpacing);
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if((uint32_t)i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues - 1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i + 1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x
is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q31_t arm_linear_interp_q31(
+ q31_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (q31_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x
is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q15_t arm_linear_interp_q15(
+ q15_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (int32_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (q15_t) (y >> 20);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x
is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+ static __INLINE q7_t arm_linear_interp_q7(
+ q7_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ uint32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ if (x < 0)
+ {
+ return (pYData[0]);
+ }
+ index = (x >> 20) & 0xfff;
+
+ if(index >= (nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (q7_t) (y >> 20);
+ }
+ }
+
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+ float32_t arm_sin_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q31_t arm_sin_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q15_t arm_sin_q15(
+ q15_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+ float32_t arm_cos_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q31_t arm_cos_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ *
+ * x1 = x0 - f(x0)/f'(x0)
+ *
+ * where x1
is the current estimate,
+ * x0
is the previous estimate, and
+ * f'(x0)
is the derivative of f()
evaluated at x0
.
+ * For the square root function, the algorithm reduces to:
+ *
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ *
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in
is negative value and returns zero output for negative values.
+ */
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in,
+ float32_t * pOut)
+ {
+ if(in >= 0.0f)
+ {
+
+#if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined(__GNUC__)
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000)
+ __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in));
+#else
+ *pOut = sqrtf(in);
+#endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in
is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in,
+ q31_t * pOut);
+
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in
is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in,
+ q15_t * pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[in] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function f(x, y)
is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * Algorithm
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ *
+ *
+ * \par
+ * where numRows
specifies the number of rows in the table;
+ * numCols
specifies the number of columns in the table;
+ * and pData
points to an array of size numRows*numCols
values.
+ * The data table pTable
is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at pTable[x + y*numCols]
where x and y are integers.
+ *
+ * \par
+ * Let (x, y)
specify the desired interpolation point. Then define:
+ *
+ * XF = floor(x)
+ * YF = floor(y)
+ *
+ * \par
+ * The interpolated output point is computed as:
+ *
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ *
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + (int32_t)nCols * (cI) ];
+ x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ];
+ y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return ((q31_t)(acc << 2));
+ }
+
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return ((q15_t)(acc >> 36));
+ }
+
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return ((q7_t)(acc >> 40));
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+/* SMMLAR */
+#define multAcc_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMLSR */
+#define multSub_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMULR */
+#define mult_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+/* SMMLA */
+#define multAcc_32x32_keep32(a, x, y) \
+ a += (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMLS */
+#define multSub_32x32_keep32(a, x, y) \
+ a -= (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMUL */
+#define mult_32x32_keep32(a, x, y) \
+ a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM )
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("push") \
+ _Pragma ("O1")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_EXIT \
+ _Pragma ("pop")
+ #else
+ #define LOW_OPTIMIZATION_EXIT
+ #endif
+
+ /* Enter low optimization region - place directly above function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+ #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__)
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define LOW_OPTIMIZATION_EXIT
+
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_armcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_armcc.h
new file mode 100644
index 00000000..f2bb66a0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_armcc.h
@@ -0,0 +1,734 @@
+/**************************************************************************//**
+ * @file cmsis_armcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+ register uint32_t __regBasePriMax __ASM("basepri_max");
+ __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0U);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() do {\
+ __schedule_barrier();\
+ __isb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+ __schedule_barrier();\
+ __dsb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+ __schedule_barrier();\
+ __dmb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ #define __RBIT __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+#else
+ #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+#else
+ #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+#else
+ #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXB(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXH(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXW(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32U) ) >> 32U))
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_armcc_V6.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_armcc_V6.h
new file mode 100644
index 00000000..d714e9b0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_armcc_V6.h
@@ -0,0 +1,1800 @@
+/**************************************************************************//**
+ * @file cmsis_armcc_V6.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_V6_H
+#define __CMSIS_ARMCC_V6_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Control Register (non-secure)
+ \details Returns the content of the non-secure Control Register when in secure mode.
+ \return non-secure Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Control Register (non-secure)
+ \details Writes the given value to the non-secure Control Register when in secure state.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control)
+{
+ __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get IPSR Register (non-secure)
+ \details Returns the content of the non-secure IPSR Register when in secure state.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get APSR Register (non-secure)
+ \details Returns the content of the non-secure APSR Register when in secure state.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get xPSR Register (non-secure)
+ \details Returns the content of the non-secure xPSR Register when in secure state.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Process Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Main Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Main Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Priority Mask (non-secure)
+ \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Priority Mask (non-secure)
+ \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
+}
+#endif
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Base Priority (non-secure)
+ \details Returns the current value of the non-secure Base Priority register when in secure state.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority (non-secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority with condition (non_secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Fault Mask (non-secure)
+ \details Returns the current value of the non-secure Fault Mask register when in secure state.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Fault Mask (non-secure)
+ \details Assigns the given value to the non-secure Fault Mask register when in secure state.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
+}
+#endif
+
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Get Process Stack Pointer Limit
+ \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Process Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer Limit
+ \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer Limit
+ \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim" : "=r" (result) );
+
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Main Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer Limit
+ \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
+ \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Main Stack Pointer Limit (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
+ \param [in] MainStackPtrLimit Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
+}
+#endif
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+
+#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */
+
+/**
+ \brief Get FPSCR
+ \details eturns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+#define __get_FPSCR __builtin_arm_get_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get FPSCR (non-secure)
+ \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state.
+ \return Floating Point Status/Control register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+#define __set_FPSCR __builtin_arm_set_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set FPSCR (non-secure)
+ \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __builtin_arm_nop
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __builtin_arm_wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __builtin_arm_wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __builtin_arm_sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() __builtin_arm_isb(0xF);
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __builtin_arm_dsb(0xF);
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __builtin_arm_dmb(0xF);
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __builtin_bswap32
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] op1 Value to rotate
+ \param [in] op2 Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB (uint8_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH (uint16_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW (uint32_t)__builtin_arm_ldrex
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __builtin_arm_clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+/*#define __SSAT __builtin_arm_ssat*/
+#define __SSAT(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __builtin_arm_usat
+#if 0
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+#endif
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
+}
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Load-Acquire (8 bit)
+ \details Executes a LDAB instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (16 bit)
+ \details Executes a LDAH instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (32 bit)
+ \details Executes a LDA instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief Store-Release (8 bit)
+ \details Executes a STLB instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (16 bit)
+ \details Executes a STLH instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (32 bit)
+ \details Executes a STL instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Load-Acquire Exclusive (8 bit)
+ \details Executes a LDAB exclusive instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDAEXB (uint8_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (16 bit)
+ \details Executes a LDAH exclusive instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDAEXH (uint16_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (32 bit)
+ \details Executes a LDA exclusive instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDAEX (uint32_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Store-Release Exclusive (8 bit)
+ \details Executes a STLB exclusive instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXB (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (16 bit)
+ \details Executes a STLH exclusive instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXH (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (32 bit)
+ \details Executes a STL exclusive instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEX (uint32_t)__builtin_arm_stlex
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__ARM_FEATURE_DSP == 1U) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_V6_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_gcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_gcc.h
new file mode 100644
index 00000000..d868f2e6
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/cmsis_gcc.h
@@ -0,0 +1,1373 @@
+/**************************************************************************//**
+ * @file cmsis_gcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_GCC_H
+#define __CMSIS_GCC_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* __CMSIS_GCC_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm0.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm0.h
new file mode 100644
index 00000000..fdee521a
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm0.h
@@ -0,0 +1,798 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000U
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm0plus.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm0plus.h
new file mode 100644
index 00000000..7614450d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm0plus.h
@@ -0,0 +1,914 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0+ definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000U
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0U
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1U)
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1U)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0+ header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm3.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm3.h
new file mode 100644
index 00000000..34ed84c1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm3.h
@@ -0,0 +1,1763 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200U
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201U) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U))
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1U];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm4.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm4.h
new file mode 100644
index 00000000..01cb73bf
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm4.h
@@ -0,0 +1,1937 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000U
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm7.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm7.h
new file mode 100644
index 00000000..20963c14
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cm7.h
@@ -0,0 +1,2512 @@
+/**************************************************************************//**
+ * @file core_cm7.h
+ * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M7
+ @{
+ */
+
+/* CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \
+ __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x07U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM7_REV
+ #define __CM7_REV 0x0000U
+ #warning "__CM7_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __ICACHE_PRESENT
+ #define __ICACHE_PRESENT 0U
+ #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DCACHE_PRESENT
+ #define __DCACHE_PRESENT 0U
+ #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DTCM_PRESENT
+ #define __DTCM_PRESENT 0U
+ #warning "__DTCM_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 3U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[1U];
+ __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */
+ __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */
+ __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */
+ __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED3[93U];
+ __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */
+ uint32_t RESERVED4[15U];
+ __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */
+ uint32_t RESERVED5[1U];
+ __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */
+ uint32_t RESERVED6[1U];
+ __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */
+ __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */
+ __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */
+ __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */
+ __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */
+ __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */
+ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */
+ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */
+ uint32_t RESERVED7[6U];
+ __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */
+ __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */
+ __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */
+ __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */
+ __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */
+ uint32_t RESERVED8[1U];
+ __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+ uint32_t RESERVED3[981U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 Definitions */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ########################## FPU functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_FpuFunctions FPU Functions
+ \brief Function that provides FPU type.
+ @{
+ */
+
+/**
+ \brief get FPU type
+ \details returns the FPU type
+ \returns
+ - \b 0: No FPU
+ - \b 1: Single precision FPU
+ - \b 2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+ uint32_t mvfr0;
+
+ mvfr0 = SCB->MVFR0;
+ if ((mvfr0 & 0x00000FF0UL) == 0x220UL)
+ {
+ return 2UL; /* Double + Single precision FPU */
+ }
+ else if ((mvfr0 & 0x00000FF0UL) == 0x020UL)
+ {
+ return 1UL; /* Single precision FPU */
+ }
+ else
+ {
+ return 0UL; /* No FPU */
+ }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ########################## Cache functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_CacheFunctions Cache Functions
+ \brief Functions that configure Instruction and Data cache.
+ @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
+
+
+/**
+ \brief Enable I-Cache
+ \details Turns on I-Cache
+ */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable I-Cache
+ \details Turns off I-Cache
+ */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate I-Cache
+ \details Invalidates I-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL;
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Enable D-Cache
+ \details Turns on D-Cache
+ */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+ __DSB();
+
+ SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable D-Cache
+ \details Turns off D-Cache
+ */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate D-Cache
+ \details Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean D-Cache
+ \details Cleans D-Cache
+ */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
+ ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean & Invalidate D-Cache
+ \details Cleans and Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Invalidate by address
+ \details Invalidates D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t)addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean by address
+ \details Cleans D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean and Invalidate by address
+ \details Cleans and invalidates D_Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmFunc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmFunc.h
new file mode 100644
index 00000000..ca319a55
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmFunc.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmInstr.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmInstr.h
new file mode 100644
index 00000000..a0a50645
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmInstr.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmSimd.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmSimd.h
new file mode 100644
index 00000000..4d76bf90
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_cmSimd.h
@@ -0,0 +1,96 @@
+/**************************************************************************//**
+ * @file core_cmSimd.h
+ * @brief CMSIS Cortex-M SIMD Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_sc000.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_sc000.h
new file mode 100644
index 00000000..ea16bf3e
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_sc000.h
@@ -0,0 +1,926 @@
+/**************************************************************************//**
+ * @file core_sc000.h
+ * @brief CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC000
+ @{
+ */
+
+/* CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
+ __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (000U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC000_REV
+ #define __SC000_REV 0x0000U
+ #warning "__SC000_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ uint32_t RESERVED1[154U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the SC000 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_sc300.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_sc300.h
new file mode 100644
index 00000000..820cef4f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/CMSIS/Include/core_sc300.h
@@ -0,0 +1,1745 @@
+/**************************************************************************//**
+ * @file core_sc300.h
+ * @brief CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC3000
+ @{
+ */
+
+/* CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
+ __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (300U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC300_REV
+ #define __SC300_REV 0x0000U
+ #warning "__SC300_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED1[129U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ uint32_t RESERVED1[1U];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 00000000..d261da88
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,3173 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#define COMP_LPTIMCONNECTION_ENABLED COMP_LPTIMCONNECTION_IN1_ENABLED /*!< COMPX output is connected to LPTIM input 1 */
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */
+/* to the second dedicated IO (only for COMP2). */
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE 0x00000000U
+#define DAC_WAVE_NOISE DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define __DIV_LPUART UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR 0x00000100U
+#define ETH_MMCRIR 0x00000104U
+#define ETH_MMCTIR 0x00000108U
+#define ETH_MMCRIMR 0x0000010CU
+#define ETH_MMCTIMR 0x00000110U
+#define ETH_MMCTGFSCCR 0x0000014CU
+#define ETH_MMCTGFMSCCR 0x00000150U
+#define ETH_MMCTGFCR 0x00000168U
+#define ETH_MMCRFCECR 0x00000194U
+#define ETH_MMCRFAECR 0x00000198U
+#define ETH_MMCRGUFCR 0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */
+#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4 || STM32F7*/
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE RCC_IT_LSECSS
+#define RCC_IT_CSSHSE RCC_IT_CSS
+
+#define RCC_PLLMUL_3 RCC_PLL_MUL3
+#define RCC_PLLMUL_4 RCC_PLL_MUL4
+#define RCC_PLLMUL_6 RCC_PLL_MUL6
+#define RCC_PLLMUL_8 RCC_PLL_MUL8
+#define RCC_PLLMUL_12 RCC_PLL_MUL12
+#define RCC_PLLMUL_16 RCC_PLL_MUL16
+#define RCC_PLLMUL_24 RCC_PLL_MUL24
+#define RCC_PLLMUL_32 RCC_PLL_MUL32
+#define RCC_PLLMUL_48 RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2 RCC_PLL_DIV2
+#define RCC_PLLDIV_3 RCC_PLL_DIV3
+#define RCC_PLLDIV_4 RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2)
+#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef
+#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef
+#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef
+#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal.h
new file mode 100644
index 00000000..ca95785d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal.h
@@ -0,0 +1,916 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_H
+#define __STM32F3xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_conf.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Macros
+ * @{
+ */
+#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9))
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+/** @defgroup SYSCFG_BitAddress_AliasRegion SYSCFG registers bit address in the alias region
+ * @brief SYSCFG registers bit address in the alias region
+ * @{
+ */
+/* ------------ SYSCFG registers bit address in the alias region -------------*/
+#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
+/* --- CFGR2 Register ---*/
+/* Alias word address of BYP_ADDR_PAR bit */
+#define CFGR2_OFFSET (SYSCFG_OFFSET + 0x18U)
+#define BYPADDRPAR_BitNumber 0x04U
+#define CFGR2_BYPADDRPAR_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32U) + (BYPADDRPAR_BitNumber * 4U))
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_Remapping HAL DMA Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG (not available on STM32F373xC/STM32F378xx devices)
+ * @{
+ */
+#define HAL_REMAPDMA_ADC24_DMA2_CH34 (0x00000100U) /*!< ADC24 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (ADC24 DMA requests mapped on DMA2 channels 3 and 4) */
+#define HAL_REMAPDMA_TIM16_DMA1_CH6 (0x00000800U) /*!< TIM16 DMA request remap
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA1 channel 6) */
+#define HAL_REMAPDMA_TIM17_DMA1_CH7 (0x00001000U) /*!< TIM17 DMA request remap
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA1 channel 7) */
+#define HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3 (0x00002000U) /*!< TIM6 and DAC channel1 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (TIM6_UP and DAC_CH1 DMA requests mapped on DMA1 channel 3) */
+#define HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4 (0x00004000U) /*!< TIM7 and DAC channel2 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (TIM7_UP and DAC_CH2 DMA requests mapped on DMA1 channel 4) */
+#define HAL_REMAPDMA_DAC2_CH1_DMA1_CH5 (0x00008000U) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#define HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5 (0x00008000U) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK (0x01000000U)
+#endif
+
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH2 (0x01000003U) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH4 (0x01000001U) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH6 (0x01000002U) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH3 (0x0100000CU) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH5 (0x01000004U) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH7 (0x01000008U) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH7 (0x01000030U) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH3 (0x01000010U) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH5 (0x01000020U) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH6 (0x010000C0U) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH2 (0x01000040U) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH4 (0x01000080U) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH2 (0x01000100U) /*!< ADC2 DMA remap
+ x0: No remap (ADC2 on DMA2)
+ 10: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH4 (0x01000300U) /*!< ADC2 DMA remap
+ 11: Map on DMA1 channel 4 */
+#endif /* SYSCFG_CFGR3_DMA_RMP */
+
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#define IS_DMA_REMAP(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH2) == HAL_REMAPDMA_SPI1_RX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH4) == HAL_REMAPDMA_SPI1_RX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH6) == HAL_REMAPDMA_SPI1_RX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH3) == HAL_REMAPDMA_SPI1_TX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH5) == HAL_REMAPDMA_SPI1_TX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH7) == HAL_REMAPDMA_SPI1_TX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH7) == HAL_REMAPDMA_I2C1_RX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH3) == HAL_REMAPDMA_I2C1_RX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH5) == HAL_REMAPDMA_I2C1_RX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH6) == HAL_REMAPDMA_I2C1_TX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH2) == HAL_REMAPDMA_I2C1_TX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH4) == HAL_REMAPDMA_I2C1_TX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH2) == HAL_REMAPDMA_ADC2_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH4) == HAL_REMAPDMA_ADC2_DMA1_CH4))
+#else
+#define IS_DMA_REMAP(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5))
+#endif /* SYSCFG_CFGR3_DMA_RMP && SYSCFG_CFGR1_DMA_RMP*/
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+/** @defgroup HAL_Trigger_Remapping HAL Trigger Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG
+ * @{
+ */
+#define HAL_REMAPTRIGGER_DAC1_TRIG (0x00000080U) /*!< DAC trigger remap (when TSEL = 001 on STM32F303xB/C and STM32F358xx devices)
+ 0: No remap (DAC trigger is TIM8_TRGO)
+ 1: Remap (DAC trigger is TIM3_TRGO) */
+#define HAL_REMAPTRIGGER_TIM1_ITR3 (0x00000040U) /*!< TIM1 ITR3 trigger remap
+ 0: No remap
+ 1: Remap (TIM1_TRG3 = TIM17_OC) */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK (0x01000000U)
+#endif
+#define HAL_REMAPTRIGGER_DAC1_TRIG3 (0x01010000U) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: Remap (DAC trigger is TIM15_TRGO)
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG1) */
+#define HAL_REMAPTRIGGER_DAC1_TRIG5 (0x01020000U) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: No remap
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG2) */
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG3) == HAL_REMAPTRIGGER_DAC1_TRIG3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG5) == HAL_REMAPTRIGGER_DAC1_TRIG5))
+#else
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3))
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+#if defined (STM32F302xE)
+/** @defgroup HAL_ADC_Trigger_Remapping HAL ADC Trigger Remapping
+ * @{
+ */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT2 SYSCFG_CFGR4_ADC12_EXT2_RMP /*!< Input trigger of ADC12 regular channel EXT2
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT3 SYSCFG_CFGR4_ADC12_EXT3_RMP /*!< Input trigger of ADC12 regular channel EXT3
+ 0: No remap (TIM2_CC2)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT5 SYSCFG_CFGR4_ADC12_EXT5_RMP /*!< Input trigger of ADC12 regular channel EXT5
+ 0: No remap (TIM4_CC4)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT13 SYSCFG_CFGR4_ADC12_EXT13_RMP /*!< Input trigger of ADC12 regular channel EXT13
+ 0: No remap (TIM6_TRGO)
+ 1: Remap (TIM20_CC2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT15 SYSCFG_CFGR4_ADC12_EXT15_RMP /*!< Input trigger of ADC12 regular channel EXT15
+ 0: No remap (TIM3_CC4)
+ 1: Remap (TIM20_CC3) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT3 SYSCFG_CFGR4_ADC12_JEXT3_RMP /*!< Input trigger of ADC12 injected channel JEXT3
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT6 SYSCFG_CFGR4_ADC12_JEXT6_RMP /*!< Input trigger of ADC12 injected channel JEXT6
+ 0: No remap (EXTI line 15)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT13 SYSCFG_CFGR4_ADC12_JEXT13_RMP /*!< Input trigger of ADC12 injected channel JEXT13
+ 0: No remap (TIM3_CC1)
+ 1: Remap (TIM20_CC4) */
+
+#define IS_HAL_REMAPADCTRIGGER(RMP) ((((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT2) == HAL_REMAPADCTRIGGER_ADC12_EXT2) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT3) == HAL_REMAPADCTRIGGER_ADC12_EXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT5) == HAL_REMAPADCTRIGGER_ADC12_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT13) == HAL_REMAPADCTRIGGER_ADC12_EXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT15) == HAL_REMAPADCTRIGGER_ADC12_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT3) == HAL_REMAPADCTRIGGER_ADC12_JEXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT6) == HAL_REMAPADCTRIGGER_ADC12_JEXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT13) == HAL_REMAPADCTRIGGER_ADC12_JEXT13))
+/**
+ * @}
+ */
+#endif /* STM32F302xE */
+
+#if defined (STM32F303xE) || defined (STM32F398xx)
+/** @defgroup HAL_ADC_Trigger_Remapping HAL ADC Trigger Remapping
+ * @{
+ */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT2 SYSCFG_CFGR4_ADC12_EXT2_RMP /*!< Input trigger of ADC12 regular channel EXT2
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT3 SYSCFG_CFGR4_ADC12_EXT3_RMP /*!< Input trigger of ADC12 regular channel EXT3
+ 0: No remap (TIM2_CC2)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT5 SYSCFG_CFGR4_ADC12_EXT5_RMP /*!< Input trigger of ADC12 regular channel EXT5
+ 0: No remap (TIM4_CC4)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT13 SYSCFG_CFGR4_ADC12_EXT13_RMP /*!< Input trigger of ADC12 regular channel EXT13
+ 0: No remap (TIM6_TRGO)
+ 1: Remap (TIM20_CC2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT15 SYSCFG_CFGR4_ADC12_EXT15_RMP /*!< Input trigger of ADC12 regular channel EXT15
+ 0: No remap (TIM3_CC4)
+ 1: Remap (TIM20_CC3) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT3 SYSCFG_CFGR4_ADC12_JEXT3_RMP /*!< Input trigger of ADC12 injected channel JEXT3
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT6 SYSCFG_CFGR4_ADC12_JEXT6_RMP /*!< Input trigger of ADC12 injected channel JEXT6
+ 0: No remap (EXTI line 15)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT13 SYSCFG_CFGR4_ADC12_JEXT13_RMP /*!< Input trigger of ADC12 injected channel JEXT13
+ 0: No remap (TIM3_CC1)
+ 1: Remap (TIM20_CC4) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT5 SYSCFG_CFGR4_ADC34_EXT5_RMP /*!< Input trigger of ADC34 regular channel EXT5
+ 0: No remap (EXTI line 2)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT6 SYSCFG_CFGR4_ADC34_EXT6_RMP /*!< Input trigger of ADC34 regular channel EXT6
+ 0: No remap (TIM4_CC1)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT15 SYSCFG_CFGR4_ADC34_EXT15_RMP /*!< Input trigger of ADC34 regular channel EXT15
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT5 SYSCFG_CFGR4_ADC34_JEXT5_RMP /*!< Input trigger of ADC34 injected channel JEXT5
+ 0: No remap (TIM4_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT11 SYSCFG_CFGR4_ADC34_JEXT11_RMP /*!< Input trigger of ADC34 injected channel JEXT11
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT14 SYSCFG_CFGR4_ADC34_JEXT14_RMP /*!< Input trigger of ADC34 injected channel JEXT14
+ 0: No remap (TIM7_TRGO)
+ 1: Remap (TIM20_CC2) */
+
+#define IS_HAL_REMAPADCTRIGGER(RMP) ((((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT2) == HAL_REMAPADCTRIGGER_ADC12_EXT2) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT3) == HAL_REMAPADCTRIGGER_ADC12_EXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT5) == HAL_REMAPADCTRIGGER_ADC12_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT13) == HAL_REMAPADCTRIGGER_ADC12_EXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT15) == HAL_REMAPADCTRIGGER_ADC12_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT3) == HAL_REMAPADCTRIGGER_ADC12_JEXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT6) == HAL_REMAPADCTRIGGER_ADC12_JEXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT13) == HAL_REMAPADCTRIGGER_ADC12_JEXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT5) == HAL_REMAPADCTRIGGER_ADC34_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT6) == HAL_REMAPADCTRIGGER_ADC34_EXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT15) == HAL_REMAPADCTRIGGER_ADC34_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT5) == HAL_REMAPADCTRIGGER_ADC34_JEXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT11) == HAL_REMAPADCTRIGGER_ADC34_JEXT11) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT14) == HAL_REMAPADCTRIGGER_ADC34_JEXT14))
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO
+ * @{
+ */
+
+/** @brief Fast-mode Plus driving capability on a specific GPIO
+ */
+#if defined(SYSCFG_CFGR1_I2C_PB6_FMP)
+#define SYSCFG_FASTMODEPLUS_PB6 ((uint32_t)SYSCFG_CFGR1_I2C_PB6_FMP) /*!< Enable Fast-mode Plus on PB6 */
+#endif /* SYSCFG_CFGR1_I2C_PB6_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB7_FMP)
+#define SYSCFG_FASTMODEPLUS_PB7 ((uint32_t)SYSCFG_CFGR1_I2C_PB7_FMP) /*!< Enable Fast-mode Plus on PB7 */
+#endif /* SYSCFG_CFGR1_I2C_PB7_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
+#define SYSCFG_FASTMODEPLUS_PB8 ((uint32_t)SYSCFG_CFGR1_I2C_PB8_FMP) /*!< Enable Fast-mode Plus on PB8 */
+#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB9_FMP)
+#define SYSCFG_FASTMODEPLUS_PB9 ((uint32_t)SYSCFG_CFGR1_I2C_PB9_FMP) /*!< Enable Fast-mode Plus on PB9 */
+#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/* CCM-SRAM defined */
+/** @defgroup HAL_Page_Write_Protection HAL CCM RAM page write protection
+ * @{
+ */
+#define HAL_SYSCFG_WP_PAGE0 (SYSCFG_RCR_PAGE0) /*!< ICODE SRAM Write protection page 0 */
+#define HAL_SYSCFG_WP_PAGE1 (SYSCFG_RCR_PAGE1) /*!< ICODE SRAM Write protection page 1 */
+#define HAL_SYSCFG_WP_PAGE2 (SYSCFG_RCR_PAGE2) /*!< ICODE SRAM Write protection page 2 */
+#define HAL_SYSCFG_WP_PAGE3 (SYSCFG_RCR_PAGE3) /*!< ICODE SRAM Write protection page 3 */
+#if defined(SYSCFG_RCR_PAGE4)
+/* More than 4KB CCM-SRAM defined */
+#define HAL_SYSCFG_WP_PAGE4 (SYSCFG_RCR_PAGE4) /*!< ICODE SRAM Write protection page 4 */
+#define HAL_SYSCFG_WP_PAGE5 (SYSCFG_RCR_PAGE5) /*!< ICODE SRAM Write protection page 5 */
+#define HAL_SYSCFG_WP_PAGE6 (SYSCFG_RCR_PAGE6) /*!< ICODE SRAM Write protection page 6 */
+#define HAL_SYSCFG_WP_PAGE7 (SYSCFG_RCR_PAGE7) /*!< ICODE SRAM Write protection page 7 */
+#endif /* SYSCFG_RCR_PAGE4 */
+#if defined(SYSCFG_RCR_PAGE8)
+#define HAL_SYSCFG_WP_PAGE8 (SYSCFG_RCR_PAGE8) /*!< ICODE SRAM Write protection page 8 */
+#define HAL_SYSCFG_WP_PAGE9 (SYSCFG_RCR_PAGE9) /*!< ICODE SRAM Write protection page 9 */
+#define HAL_SYSCFG_WP_PAGE10 (SYSCFG_RCR_PAGE10) /*!< ICODE SRAM Write protection page 10 */
+#define HAL_SYSCFG_WP_PAGE11 (SYSCFG_RCR_PAGE11) /*!< ICODE SRAM Write protection page 11 */
+#define HAL_SYSCFG_WP_PAGE12 (SYSCFG_RCR_PAGE12) /*!< ICODE SRAM Write protection page 12 */
+#define HAL_SYSCFG_WP_PAGE13 (SYSCFG_RCR_PAGE13) /*!< ICODE SRAM Write protection page 13 */
+#define HAL_SYSCFG_WP_PAGE14 (SYSCFG_RCR_PAGE14) /*!< ICODE SRAM Write protection page 14 */
+#define HAL_SYSCFG_WP_PAGE15 (SYSCFG_RCR_PAGE15) /*!< ICODE SRAM Write protection page 15 */
+#endif /* SYSCFG_RCR_PAGE8 */
+
+#if defined(SYSCFG_RCR_PAGE8)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFU))
+#elif defined(SYSCFG_RCR_PAGE4)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0x00FFU))
+#else
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0x000FU))
+#endif /* SYSCFG_RCR_PAGE8 */
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/** @defgroup HAL_SYSCFG_Interrupts HAL SYSCFG Interrupts
+ * @{
+ */
+#define HAL_SYSCFG_IT_FPU_IOC (SYSCFG_CFGR1_FPU_IE_0) /*!< Floating Point Unit Invalid operation Interrupt */
+#define HAL_SYSCFG_IT_FPU_DZC (SYSCFG_CFGR1_FPU_IE_1) /*!< Floating Point Unit Divide-by-zero Interrupt */
+#define HAL_SYSCFG_IT_FPU_UFC (SYSCFG_CFGR1_FPU_IE_2) /*!< Floating Point Unit Underflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_OFC (SYSCFG_CFGR1_FPU_IE_3) /*!< Floating Point Unit Overflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_IDC (SYSCFG_CFGR1_FPU_IE_4) /*!< Floating Point Unit Input denormal Interrupt */
+#define HAL_SYSCFG_IT_FPU_IXC (SYSCFG_CFGR1_FPU_IE_5) /*!< Floating Point Unit Inexact Interrupt */
+
+#define IS_HAL_SYSCFG_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_0) == SYSCFG_CFGR1_FPU_IE_0) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_1) == SYSCFG_CFGR1_FPU_IE_1) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_2) == SYSCFG_CFGR1_FPU_IE_2) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_3) == SYSCFG_CFGR1_FPU_IE_3) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_4) == SYSCFG_CFGR1_FPU_IE_4) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_5) == SYSCFG_CFGR1_FPU_IE_5))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @defgroup Debug_MCU_APB1_Freeze Freeze/Unfreeze APB1 Peripherals in Debug mode
+ * @{
+ */
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM5_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM18_STOP)
+#define __HAL_FREEZE_TIM18_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM18_STOP))
+#define __HAL_UNFREEZE_TIM18_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM18_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+/**
+ * @}
+ */
+
+/** @defgroup Debug_MCU_APB2_Freeze Freeze/Unfreeze APB2 Peripherals in Debug mode
+ * @{
+ */
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM15() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM16() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM17() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM19_STOP)
+#define __HAL_FREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#define __HAL_UNFREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM19_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM20_STOP)
+#define __HAL_FREEZE_TIM20_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM20_STOP))
+#define __HAL_UNFREEZE_TIM20_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM20_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM20_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_HRTIM1_STOP)
+#define __HAL_FREEZE_HRTIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_HRTIM1_STOP))
+#define __HAL_UNFREEZE_HRTIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_HRTIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_HRTIM1_STOP */
+/**
+ * @}
+ */
+
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_2)
+#define __HAL_SYSCFG_FMC_BANK() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_2); \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_MEM_MODE_2 */
+/**
+ * @}
+ */
+
+/** @defgroup Encoder_Mode Encoder Mode
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_ENCODER_MODE)
+/** @brief No Encoder mode
+ */
+#define __HAL_REMAPENCODER_NONE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE))
+#endif /* SYSCFG_CFGR1_ENCODER_MODE */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0)
+/** @brief Encoder mode : TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM2() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_0; \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM3() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_1; \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0) && defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 (STM32F303xB/C and STM32F358xx devices)
+ */
+#define __HAL_REMAPENCODER_TIM4() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_ENCODER_MODE_0 | SYSCFG_CFGR1_ENCODER_MODE_1); \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 && SYSCFG_CFGR1_ENCODER_MODE_1 */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Remap_Enable DMA Remap Enable
+ * @{
+ */
+#if defined(SYSCFG_CFGR3_DMA_RMP) && defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__DMA_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__DMA_REMAP__))); \
+ }while(0U)
+#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__DMA_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__DMA_REMAP__))); \
+ }while(0U)
+#elif defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0U)
+#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0U)
+#endif /* SYSCFG_CFGR3_DMA_RMP || SYSCFG_CFGR1_DMA_RMP */
+/**
+ * @}
+ */
+
+/** @defgroup FastModePlus_GPIO Fast-mode Plus on GPIO
+ * @{
+ */
+/** @brief Fast-mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO values.
+ * That you can find above these macros.
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+ SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+ }while(0U)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+ CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+ }while(0U)
+/**
+ * @}
+ */
+
+/** @defgroup Floating_Point_Unit_Interrupts_Enable Floating Point Unit Interrupts Enable
+ * @{
+ */
+/** @brief SYSCFG interrupt enable/disable macros
+ * @param __INTERRUPT__ This parameter can be a value of @ref HAL_SYSCFG_Interrupts
+ */
+#define __HAL_SYSCFG_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 |= (__INTERRUPT__); \
+ }while(0U)
+
+#define __HAL_SYSCFG_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 &= ~(__INTERRUPT__); \
+ }while(0U)
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_USB_IT_RMP)
+/** @defgroup USB_Interrupt_Remap USB Interrupt Remap
+ * @{
+ */
+/** @brief USB interrupt remapping enable/disable macros
+ */
+#define __HAL_REMAPINTERRUPT_USB_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_USB_IT_RMP))
+#define __HAL_REMAPINTERRUPT_USB_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_USB_IT_RMP))
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_USB_IT_RMP */
+
+#if defined(SYSCFG_CFGR1_VBAT)
+/** @defgroup VBAT_Monitoring_Enable VBAT Monitoring Enable
+ * @{
+ */
+/** @brief SYSCFG interrupt enable/disable macros
+ */
+#define __HAL_SYSCFG_VBAT_MONITORING_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_VBAT))
+#define __HAL_SYSCFG_VBAT_MONITORING_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_VBAT))
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_VBAT */
+
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+ * @{
+ */
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+/** @defgroup Trigger_Remapping_Enable Trigger Remapping Enable
+ * @{
+ */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__ This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__TRIGGER_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__))); \
+ }while(0U)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__TRIGGER_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__))); \
+ }while(0U)
+#else
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__ This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__)); \
+ }while(0U)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__)); \
+ }while(0U)
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+/** @defgroup ADC_Trigger_Remapping_Enable ADC Trigger Remapping Enable
+ * @{
+ */
+/** @brief ADC trigger remapping enable/disable macros
+ * @param __ADCTRIGGER_REMAP__ This parameter can be a value of @ref HAL_ADC_Trigger_Remapping
+ */
+#define __HAL_REMAPADCTRIGGER_ENABLE(__ADCTRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPADCTRIGGER((__ADCTRIGGER_REMAP__))); \
+ (SYSCFG->CFGR4 |= (__ADCTRIGGER_REMAP__)); \
+ }while(0U)
+#define __HAL_REMAPADCTRIGGER_DISABLE(__ADCTRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPADCTRIGGER((__ADCTRIGGER_REMAP__))); \
+ (SYSCFG->CFGR4 &= ~(__ADCTRIGGER_REMAP__)); \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(SYSCFG_CFGR2_BYP_ADDR_PAR)
+/** @defgroup RAM_Parity_Check_Disable RAM Parity Check Disable
+ * @{
+ */
+/**
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (*(__IO uint32_t *) CFGR2_BYPADDRPAR_BB = 0x00000001U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_BYP_ADDR_PAR */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/** @defgroup CCM_RAM_Page_Write_Protection_Enable CCM RAM page write protection enable
+ * @{
+ */
+/** @brief CCM RAM page write protection enable macro
+ * @param __PAGE_WP__ This parameter can be a value of @ref HAL_Page_Write_Protection
+ * @note write protection can only be disabled by a system reset
+ */
+#define __HAL_SYSCFG_SRAM_WRP_ENABLE(__PAGE_WP__) do {assert_param(IS_HAL_SYSCFG_WP_PAGE((__PAGE_WP__))); \
+ SYSCFG->RCR |= (__PAGE_WP__); \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_cortex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_cortex.h
new file mode 100644
index 00000000..43ff209f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_cortex.h
@@ -0,0 +1,442 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CORTEX_H
+#define __STM32F3xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types CORTEX Exported Types
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+ * @brief MPU Region initialization structure
+ * @{
+ */
+typedef struct
+{
+ uint8_t Enable; /*!< Specifies the status of the region.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
+ uint8_t Number; /*!< Specifies the number of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Number */
+ uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
+ uint8_t Size; /*!< Specifies the size of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Size */
+ uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint8_t TypeExtField; /*!< Specifies the TEX field level.
+ This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
+ uint8_t AccessPermission; /*!< Specifies the region access permission type.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
+ uint8_t DisableExec; /*!< Specifies the instruction access status.
+ This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
+ uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
+ uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
+ uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
+}MPU_Region_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+#define NVIC_PRIORITYGROUP_0 (0x00000007U) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 (0x00000006U) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 (0x00000005U) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 (0x00000004U) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 (0x00000003U) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 (0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK (0x00000004U)
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+ * @{
+ */
+#define MPU_HFNMI_PRIVDEF_NONE (0x00000000U)
+#define MPU_HARDFAULT_NMI (0x00000002U)
+#define MPU_PRIVILEGED_DEFAULT (0x00000004U)
+#define MPU_HFNMI_PRIVDEF (0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+ * @{
+ */
+#define MPU_REGION_ENABLE ((uint8_t)0x01U)
+#define MPU_REGION_DISABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+ * @{
+ */
+#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
+#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+ * @{
+ */
+#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+ * @{
+ */
+#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+ * @{
+ */
+#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+ * @{
+ */
+#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
+#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
+#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+ * @{
+ */
+#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
+#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
+#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
+#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
+#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
+#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
+#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
+#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
+#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
+#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
+#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
+#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
+#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
+#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
+#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
+#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
+#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
+#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
+#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
+#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
+#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
+#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
+#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
+#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
+#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
+#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
+#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
+#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+ * @{
+ */
+#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
+#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
+#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
+#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
+#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
+#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+ * @{
+ */
+#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
+#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
+#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
+#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
+#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
+#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
+#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
+#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1U)
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
+
+/** @defgroup CORTEX_SysTick_clock_source_Macro_Private CORTEX SysTick clock source
+ * @{
+ */
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1U)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+ ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+ ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
+ ((TYPE) == MPU_TEX_LEVEL1) || \
+ ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RW) || \
+ ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+ ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RO) || \
+ ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
+ ((NUMBER) == MPU_REGION_NUMBER1) || \
+ ((NUMBER) == MPU_REGION_NUMBER2) || \
+ ((NUMBER) == MPU_REGION_NUMBER3) || \
+ ((NUMBER) == MPU_REGION_NUMBER4) || \
+ ((NUMBER) == MPU_REGION_NUMBER5) || \
+ ((NUMBER) == MPU_REGION_NUMBER6) || \
+ ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
+ ((SIZE) == MPU_REGION_SIZE_64B) || \
+ ((SIZE) == MPU_REGION_SIZE_128B) || \
+ ((SIZE) == MPU_REGION_SIZE_256B) || \
+ ((SIZE) == MPU_REGION_SIZE_512B) || \
+ ((SIZE) == MPU_REGION_SIZE_1KB) || \
+ ((SIZE) == MPU_REGION_SIZE_2KB) || \
+ ((SIZE) == MPU_REGION_SIZE_4KB) || \
+ ((SIZE) == MPU_REGION_SIZE_8KB) || \
+ ((SIZE) == MPU_REGION_SIZE_16KB) || \
+ ((SIZE) == MPU_REGION_SIZE_32KB) || \
+ ((SIZE) == MPU_REGION_SIZE_64KB) || \
+ ((SIZE) == MPU_REGION_SIZE_128KB) || \
+ ((SIZE) == MPU_REGION_SIZE_256KB) || \
+ ((SIZE) == MPU_REGION_SIZE_512KB) || \
+ ((SIZE) == MPU_REGION_SIZE_1MB) || \
+ ((SIZE) == MPU_REGION_SIZE_2MB) || \
+ ((SIZE) == MPU_REGION_SIZE_4MB) || \
+ ((SIZE) == MPU_REGION_SIZE_8MB) || \
+ ((SIZE) == MPU_REGION_SIZE_16MB) || \
+ ((SIZE) == MPU_REGION_SIZE_32MB) || \
+ ((SIZE) == MPU_REGION_SIZE_64MB) || \
+ ((SIZE) == MPU_REGION_SIZE_128MB) || \
+ ((SIZE) == MPU_REGION_SIZE_256MB) || \
+ ((SIZE) == MPU_REGION_SIZE_512MB) || \
+ ((SIZE) == MPU_REGION_SIZE_1GB) || \
+ ((SIZE) == MPU_REGION_SIZE_2GB) || \
+ ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Functions CORTEX Private Functions
+ * @brief CORTEX private functions
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+
+void HAL_MPU_Disable(void);
+void HAL_MPU_Enable(uint32_t MPU_Control);
+
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_def.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_def.h
new file mode 100644
index 00000000..3a13224b
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_def.h
@@ -0,0 +1,180 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_def.h
+ * @author MCD Application Team
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DEF
+#define __STM32F3xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+#if defined USE_LEGACY
+#include "Legacy/stm32_hal_legacy.h"
+#endif
+#include
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0U)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__ specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0U)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0U)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F3xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma.h
new file mode 100644
index 00000000..4120bde8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma.h
@@ -0,0 +1,470 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_H
+#define __STM32F3xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+} DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03 /*!< DMA timeout state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01 /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief HAL DMA Callback ID structure definition
+ */
+typedef enum
+{
+ HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
+ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
+ HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
+ HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
+ HAL_DMA_XFER_ALL_CB_ID = 0x04 /*!< All */
+}HAL_DMA_CallbackIDTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+ DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
+
+ uint32_t ChannelIndex; /*!< DMA Channel Index */
+} DMA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */
+#define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */
+#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @{
+ */
+#define DMA_NORMAL (0x00000000U) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @{
+ */
+#define DMA_PRIORITY_LOW (0x00000000U) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @{
+ */
+#define DMA_FLAG_GL1 (0x00000001U)
+#define DMA_FLAG_TC1 (0x00000002U)
+#define DMA_FLAG_HT1 (0x00000004U)
+#define DMA_FLAG_TE1 (0x00000008U)
+#define DMA_FLAG_GL2 (0x00000010U)
+#define DMA_FLAG_TC2 (0x00000020U)
+#define DMA_FLAG_HT2 (0x00000040U)
+#define DMA_FLAG_TE2 (0x00000080U)
+#define DMA_FLAG_GL3 (0x00000100U)
+#define DMA_FLAG_TC3 (0x00000200U)
+#define DMA_FLAG_HT3 (0x00000400U)
+#define DMA_FLAG_TE3 (0x00000800U)
+#define DMA_FLAG_GL4 (0x00001000U)
+#define DMA_FLAG_TC4 (0x00002000U)
+#define DMA_FLAG_HT4 (0x00004000U)
+#define DMA_FLAG_TE4 (0x00008000U)
+#define DMA_FLAG_GL5 (0x00010000U)
+#define DMA_FLAG_TC5 (0x00020000U)
+#define DMA_FLAG_HT5 (0x00040000U)
+#define DMA_FLAG_TE5 (0x00080000U)
+#define DMA_FLAG_GL6 (0x00100000U)
+#define DMA_FLAG_TC6 (0x00200000U)
+#define DMA_FLAG_HT6 (0x00400000U)
+#define DMA_FLAG_TE6 (0x00800000U)
+#define DMA_FLAG_GL7 (0x01000000U)
+#define DMA_FLAG_TC7 (0x02000000U)
+#define DMA_FLAG_HT7 (0x04000000U)
+#define DMA_FLAG_TE7 (0x08000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__ DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Channelx transfer.
+ * @param __HANDLE__ DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Channel transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extended module */
+#include "stm32f3xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Input and Output operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+ * @brief DMA private macros
+ * @{
+ */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma_ex.h
new file mode 100644
index 00000000..c1cec1f5
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma_ex.h
@@ -0,0 +1,290 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_EX_H
+#define __STM32F3xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
+ * @{
+ */
+/* Interrupt & Flag management */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
+ DMA_FLAG_GL5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+/**
+ * @}
+ */
+
+#else /* STM32F301x8_STM32F302x8_STM32F318xx_STM32F303x8_STM32F334x8_STM32F328xx Product devices */
+/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices
+ * @{
+ */
+
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ DMA_FLAG_GL7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+/**
+ * @}
+ */
+
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash.h
new file mode 100644
index 00000000..234e82c1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash.h
@@ -0,0 +1,397 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash.h
+ * @author MCD Application Team
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_H
+#define __STM32F3xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @addtogroup FLASH_Private_Constants
+ * @{
+ */
+#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Private_Macros
+ * @{
+ */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+ ((__LATENCY__) == FLASH_LATENCY_1) || \
+ ((__LATENCY__) == FLASH_LATENCY_2))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0U,
+ FLASH_PROC_PAGEERASE = 1U,
+ FLASH_PROC_MASSERASE = 2U,
+ FLASH_PROC_PROGRAMHALFWORD = 3U,
+ FLASH_PROC_PROGRAMWORD = 4U,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5U
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
+
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error_Codes */
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
+ * @{
+ */
+
+#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */
+#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */
+#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!ACR |= FLASH_ACR_HLFCYA)
+
+/**
+ * @brief Disable the FLASH half cycle access.
+ * @retval None
+ */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_EM_Latency FLASH Latency
+ * @brief macros to handle FLASH Latency
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__ FLASH Latency
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle
+ * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle
+ * @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle
+ * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle
+ * @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles
+ */
+#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ * @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt FLASH Interrupts
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+ * @arg @ref FLASH_IT_ERR Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+ * @arg @ref FLASH_IT_ERR Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__ specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_FLAG_BSY FLASH Busy flag
+ * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
+ * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
+ * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__ specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
+ * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
+ * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extended module */
+#include "stm32f3xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash_ex.h
new file mode 100644
index 00000000..48bb860b
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash_ex.h
@@ -0,0 +1,498 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @brief Header file of Flash HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_EX_H
+#define __STM32F3xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Private_Constants
+ * @{
+ */
+
+#define FLASH_SIZE_DATA_REGISTER (0x1FFFF7CCU)
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Private_Macros
+ * @{
+ */
+#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+
+
+#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
+#define IS_OB_SDACD_VDD_MONITOR(VDD_MONITOR) (((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_SET) || \
+ ((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_RESET))
+#endif /* FLASH_OBR_SDADC12_VDD_MONITOR */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \
+ ((ADDRESS) <= 0x0803FFFFU) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
+ ((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU))))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= 0x0807FFFFU))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \
+ ((ADDRESS) <= 0x0800FFFFU) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
+ ((ADDRESS) <= 0x08007FFFU) : ((ADDRESS) <= 0x08003FFFU))))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0803FFFFU) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0801FFFFU) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0800FFFFU)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0807FFFFU)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0800FFFFU) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x08007FFFU) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x08003FFFU)))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
+ * @{
+ */
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY / SDADC12_VDD_MONITOR
+ This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
+ @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring,
+ @ref FLASHEx_OB_RAM_Parity_Check_Enable.
+ @if STM32F373xC
+ And @ref FLASHEx_OB_SDADC12_VDD_MONITOR (only for STM32F373xC & STM32F378xx devices)
+ @endif
+ @if STM32F378xx
+ And @ref FLASHEx_OB_SDADC12_VDD_MONITOR (only for STM32F373xC & STM32F378xx devices)
+ @endif
+ */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
+ This parameter can be a value of @ref FLASHEx_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
+} FLASH_OBProgramInitTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
+ * @{
+ */
+#define FLASH_PAGE_SIZE 0x800
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_PAGES (0x00U) /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_H
+#define __STM32F3xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0U,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+/** @defgroup GPIO_pins GPIO pins
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode GPIO mode
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
+#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
+#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed GPIO speed
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull GPIO pull
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Check whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__ specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clear the EXTI's line pending flags.
+ * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Check whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clear the EXTI's line pending bits.
+ * @param __EXTI_LINE__ specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
+ (((__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
+
+#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
+ ((__MODE__) == GPIO_MODE_AF_PP) ||\
+ ((__MODE__) == GPIO_MODE_AF_OD) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_IT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_ANALOG))
+
+#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
+ ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
+ ((__SPEED__) == GPIO_SPEED_FREQ_HIGH))
+
+#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
+ ((__PULL__) == GPIO_PULLUP) || \
+ ((__PULL__) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extended module */
+#include "stm32f3xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_gpio_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_gpio_ex.h
new file mode 100644
index 00000000..3b6ee044
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_gpio_ex.h
@@ -0,0 +1,1538 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_EX_H
+#define __STM32F3xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @brief GPIO Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
+ * @{
+ */
+
+#if defined (STM32F302xC)
+/*---------------------------------- STM32F302xC ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xC */
+
+#if defined (STM32F303xC)
+/*---------------------------------- STM32F303xC ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303xC */
+
+#if defined (STM32F303xE)
+/*---------------------------------- STM32F303xE ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM20 ((uint8_t)0x02U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM20 ((uint8_t)0x03U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_TIM20 ((uint8_t)0x06U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xCU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303xE */
+
+#if defined (STM32F302xE)
+/*---------------------------------- STM32F302xE ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xCU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xE */
+
+#if defined (STM32F398xx)
+/*---------------------------------- STM32F398xx ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM20 ((uint8_t)0x02U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM20 ((uint8_t)0x03U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_TIM20 ((uint8_t)0x06U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xCU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F398xx */
+
+#if defined (STM32F358xx)
+/*---------------------------------- STM32F358xx -------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F358xx */
+
+#if defined (STM32F373xC)
+/*---------------------------------- STM32F373xC--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02U) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06U) /* CEC Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xAU) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0BU) /* TIM19 Alternate Function mapping */
+
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0BU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F373xC */
+
+
+#if defined (STM32F378xx)
+/*---------------------------------------- STM32F378xx--------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02U) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xAU) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0BU) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0BU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F378xx */
+
+#if defined (STM32F303x8)
+/*---------------------------------- STM32F303x8--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0DU) /* OPAMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0DU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303x8 */
+
+#if defined (STM32F334x8) || defined (STM32F328xx)
+/*---------------------------------- STM32F334x8/STM32F328xx -------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_HRTIM1 ((uint8_t)0x03U) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_HRTIM1 ((uint8_t)0x0CU) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0DU) /* OPAMP2 Alternate Function mapping */
+#define GPIO_AF13_HRTIM1 ((uint8_t)0x0DU) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0DU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F334x8 || STM32F328xx */
+
+#if defined (STM32F301x8) || defined (STM32F318xx)
+/*---------------------------------- STM32F301x8 / STM32F318xx ------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined (STM32F302x8)
+/*---------------------------------- STM32F302x8------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302x8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index
+* @{
+ */
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U : 5U)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U : 7U)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c.h
new file mode 100644
index 00000000..4e349739
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c.h
@@ -0,0 +1,708 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_H
+#define __STM32F3xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :\n
+ * b7-b6 Error information\n
+ * 00 : No Error\n
+ * 01 : Abort (Abort user request on going)\n
+ * 10 : Timeout\n
+ * 11 : Error\n
+ * b5 IP initilisation status\n
+ * 0 : Reset (IP not initialized)\n
+ * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)\n
+ * b4 (not used)\n
+ * x : Should be set to 0\n
+ * b3\n
+ * 0 : Ready or Busy (No Listen mode ongoing)\n
+ * 1 : Listen (IP in Address Listen Mode)\n
+ * b2 Intrinsic process state\n
+ * 0 : Ready\n
+ * 1 : Busy (IP busy with some configuration or internal operations)\n
+ * b1 Rx state\n
+ * 0 : Ready (no Rx operation ongoing)\n
+ * 1 : Busy (Rx operation ongoing)\n
+ * b0 Tx state\n
+ * 0 : Ready (no Tx operation ongoing)\n
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :\n
+ * b7 (not used)\n
+ * x : Should be set to 0\n
+ * b6\n
+ * 0 : None\n
+ * 1 : Memory (HAL I2C communication is in Memory Mode)\n
+ * b5\n
+ * 0 : None\n
+ * 1 : Slave (HAL I2C communication is in Slave Mode)\n
+ * b4\n
+ * 0 : None\n
+ * 1 : Master (HAL I2C communication is in Master Mode)\n
+ * b3-b2-b1-b0 (not used)\n
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+ * @brief I2C Error Code definition
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
+#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+typedef struct __I2C_HandleTypeDef
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
+ be a value of @ref I2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state */
+
+ HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
+} I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+ * @{
+ */
+#define I2C_OA2_NOMASK ((uint8_t)0x00U)
+#define I2C_OA2_MASK01 ((uint8_t)0x01U)
+#define I2C_OA2_MASK02 ((uint8_t)0x02U)
+#define I2C_OA2_MASK03 ((uint8_t)0x03U)
+#define I2C_OA2_MASK04 ((uint8_t)0x04U)
+#define I2C_OA2_MASK05 ((uint8_t)0x05U)
+#define I2C_OA2_MASK06 ((uint8_t)0x06U)
+#define I2C_OA2_MASK07 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE (0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+ * @{
+ */
+#define I2C_DIRECTION_TRANSMIT (0x00000000U)
+#define I2C_DIRECTION_RECEIVE (0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+ * @{
+ */
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+ * @{
+ */
+#define I2C_NO_STARTSTOP (0x00000000U)
+#define I2C_GENERATE_STOP I2C_CR2_STOP
+#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE I2C_CR2_START
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified I2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified I2C flag is set or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref I2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref I2C_FLAG_TCR Transfer complete reload
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ * @arg @ref I2C_FLAG_BUSY Bus busy
+ * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Disable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f3xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+ * @{
+ */
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME))
+
+#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)
+#define I2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
+#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f3xx_hal_i2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c_ex.h
new file mode 100644
index 00000000..7bbb7ffd
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c_ex.h
@@ -0,0 +1,179 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_EX_H
+#define __STM32F3xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE 0x00000000U
+#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+ * @{
+ */
+#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#if defined(SYSCFG_CFGR1_I2C2_FMP)
+#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
+#endif
+#if defined(SYSCFG_CFGR1_I2C3_FMP)
+#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \
+ ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f3xx_hal_i2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pcd.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pcd.h
new file mode 100644
index 00000000..c1df9598
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pcd.h
@@ -0,0 +1,891 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd.h
+ * @author MCD Application Team
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCD_H
+#define __STM32F3xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00U,
+ HAL_PCD_STATE_READY = 0x01U,
+ HAL_PCD_STATE_ERROR = 0x02U,
+ HAL_PCD_STATE_BUSY = 0x03U,
+ HAL_PCD_STATE_TIMEOUT = 0x04U
+} PCD_StateTypeDef;
+
+/**
+ * @brief PCD double buffered endpoint direction
+ */
+typedef enum
+{
+ PCD_EP_DBUF_OUT,
+ PCD_EP_DBUF_IN,
+ PCD_EP_DBUF_ERR,
+}PCD_EP_DBUF_DIR;
+
+/**
+ * @brief PCD endpoint buffer number
+ */
+typedef enum
+{
+ PCD_EP_NOBUF,
+ PCD_EP_BUF0,
+ PCD_EP_BUF1
+}PCD_EP_BUF_NUM;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref PCD_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref PCD_EP0_MPS */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref PCD_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t lpm_enable; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+
+}PCD_InitTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref PCD_EP_Type */
+
+ uint16_t pmaadress; /*!< PMA Address
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr0; /*!< PMA Address0
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr1; /*!< PMA Address1
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint8_t doublebuffer; /*!< Double buffer enable
+ This parameter can be 0 or 1 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}PCD_EPTypeDef;
+
+typedef USB_TypeDef PCD_TypeDef;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f3xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Core_Speed PCD Core Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0U /* Not Supported */
+#define PCD_SPEED_FULL 2U
+/**
+ * @}
+ */
+
+ /** @defgroup PCD_Core_PHY PCD Core PHY
+ * @{
+ */
+#define PCD_PHY_EMBEDDED 2U
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) = (uint16_t)(~(__INTERRUPT__))))
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE
+#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE)
+#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() do {\
+ EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_WAKEUP_EXTI_LINE;\
+ } while(0U)
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do {\
+ EXTI->FTSR |= (USB_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE);\
+ } while(0U)
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do {\
+ EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_WAKEUP_EXTI_LINE;\
+ } while(0U)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCD_Private_Constants PCD Private Constants
+ * @{
+ */
+/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
+ * @{
+ */
+#define USB_WAKEUP_EXTI_LINE ((uint32_t)EXTI_IMR_MR18) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0U
+#define DEP0CTL_MPS_32 1U
+#define DEP0CTL_MPS_16 2U
+#define DEP0CTL_MPS_8 3U
+
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP_Type PCD EP Type
+ * @{
+ */
+#define PCD_EP_TYPE_CTRL 0U
+#define PCD_EP_TYPE_ISOC 1U
+#define PCD_EP_TYPE_BULK 2U
+#define PCD_EP_TYPE_INTR 3U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP PCD ENDP
+ * @{
+ */
+#define PCD_ENDP0 ((uint8_t)0U)
+#define PCD_ENDP1 ((uint8_t)1U)
+#define PCD_ENDP2 ((uint8_t)2U)
+#define PCD_ENDP3 ((uint8_t)3U)
+#define PCD_ENDP4 ((uint8_t)4U)
+#define PCD_ENDP5 ((uint8_t)5U)
+#define PCD_ENDP6 ((uint8_t)6U)
+#define PCD_ENDP7 ((uint8_t)7U)
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
+ * @{
+ */
+#define PCD_SNG_BUF 0U
+#define PCD_DBL_BUF 1U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Internal macros -----------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*((uint16_t *)(((uint32_t)(&(USBx)->EP0R + (bEpNum) * 2U))))= (uint16_t)(wRegValue))
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*((uint16_t *)(((uint32_t)(&(USBx)->EP0R + (bEpNum) * 2U)))))
+
+
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wType Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ ((((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & ((uint32_t)(USB_EP_T_MASK))) | ((uint32_t)(wType)) )))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (((uint16_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EP_T_FIELD)
+
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param bDir Direction
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
+{\
+ if ((bDir) == PCD_EP_DBUF_OUT)\
+ { /* OUT double buffered endpoint */\
+ PCD_TX_DTOG((USBx), (bEpNum));\
+ }\
+ else if ((bDir) == PCD_EP_DBUF_IN)\
+ { /* IN double buffered endpoint */\
+ PCD_RX_DTOG((USBx), (bEpNum));\
+ }\
+}
+
+/**
+ * @brief gets direction of the double buffered endpoint
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval EP_DBUF_OUT, EP_DBUF_IN,
+ * EP_DBUF_ERR if the endpoint counter not yet programmed.
+ */
+#define PCD_GET_DB_DIR(USBx, bEpNum)\
+{\
+ if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00U) != 0U)\
+ return(PCD_EP_DBUF_OUT);\
+ else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FFU) != 0U)\
+ return(PCD_EP_DBUF_IN);\
+ else\
+ return(PCD_EP_DBUF_ERR);\
+}
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wState new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\
+ \
+ _wRegVal = (uint32_t) (((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPTX_DTOGMASK);\
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wState))!= 0U)\
+ { \
+ _wRegVal ^=(uint16_t) USB_EPTX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & ((uint32_t)(wState)))!= 0U) \
+ { \
+ _wRegVal ^=(uint16_t) USB_EPTX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (((uint32_t)(_wRegVal)) | USB_EP_CTR_RX|USB_EP_CTR_TX));\
+ } /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wState new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = (uint32_t) (((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPRX_DTOGMASK);\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & (wState))!= 0U) \
+ { \
+ _wRegVal ^= (uint16_t) USB_EPRX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & ((uint32_t)(wState)))!= 0U) \
+ { \
+ _wRegVal ^= (uint16_t) USB_EPRX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (((uint32_t)(_wRegVal)) | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wStaterx new state.
+ * @param wStatetx new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ } \
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ } /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) (((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPTX_STAT)
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) (((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
+
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPKIND_MASK))))
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFFU & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7FU & USB_EPREG_MASK))
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPREG_MASK)))
+
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EP_DTOG_RX) != 0)\
+ { \
+ PCD_RX_DTOG((USBx),(bEpNum));\
+ }
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EP_DTOG_TX) != 0)\
+ {\
+ PCD_TX_DTOG((USBx),(bEpNum));\
+ }
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param bAddr Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(((uint32_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)))) & USB_EPREG_MASK) | (bAddr))
+
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wAddr address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1U) << 1U))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1U) << 1U))
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param dwReg Register
+ * @param wCount Counter.
+ * @param wNBlocks no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 5U;\
+ if(((wCount) & 0x1fU) == 0U)\
+ { \
+ (wNBlocks)--;\
+ } \
+ *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10U) | (uint16_t)0x8000U); \
+ }/* PCD_CALC_BLK32 */
+
+
+#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 1U;\
+ if(((wCount) & 0x1U) != 0U)\
+ { \
+ (wNBlocks)++;\
+ } \
+ *pdwReg = (uint16_t)((wNBlocks) << 10U);\
+ }/* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if((wCount) > 62U) \
+ { \
+ PCD_CALC_BLK32((dwReg),(wCount),wNBlocks) \
+ } \
+ else \
+ { \
+ PCD_CALC_BLK2((dwReg),(wCount),wNBlocks) \
+ } \
+ }/* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount))\
+ }
+
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wCount Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) (PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)))
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) (PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)))
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
+ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
+ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
+ } /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param bDir endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount))} \
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ { \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } \
+ } /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ {/* OUT endpoint */ \
+ PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount)) \
+ } \
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ {/* IN endpoint */ \
+ *PCD_EP_RX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } \
+ } /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
+ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)) \
+ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)) \
+ } /
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Instance_definition PCD Instance definition
+ * @{
+ */
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCDEx_Private_Functions PCD Extended Private Functions
+ * @{
+ */
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pcd_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pcd_ex.h
new file mode 100644
index 00000000..973bb5d6
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pcd_ex.h
@@ -0,0 +1,152 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PCD HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCD_EX_H
+#define __STM32F3xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCDEx_Exported_Macros PCD Extended Exported Macros
+ * @{
+ */
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F373xC)
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400U)))))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400U)))))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400U)))))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400U)))))
+
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg =PCD_EP_RX_CNT((USBx),(bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG((pdwReg), (wCount))\
+ }
+
+#endif /* STM32F302xC || STM32F303xC || */
+ /* STM32F373xC */
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302x8)
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400U)))))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400U)))))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400U)))))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400U)))))
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum));\
+ PCD_SET_EP_CNT_RX_REG((pdwReg), (wCount))\
+ }
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302x8 */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress);
+
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr.h
new file mode 100644
index 00000000..e8531c41
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr.h
@@ -0,0 +1,235 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_H
+#define __STM32F3xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+
+#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) /*!< Wakeup pin 1U */
+#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) /*!< Wakeup pin 2U */
+#define PWR_WAKEUP_PIN3 ((uint32_t)PWR_CSR_EWUP3) /*!< Wakeup pin 3U */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON (0x00000000U) /*!< Voltage regulator on during STOP mode */
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS /*!< Voltage regulator in low-power mode during STOP mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U) /*!< Wait For Interruption instruction to enter SLEEP mode */
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U) /*!< Wait For Event instruction to enter SLEEP mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U) /*!< Wait For Interruption instruction to enter STOP mode */
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U) /*!< Wait For Event instruction to enter STOP mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF /*!< Wakeup event from wakeup pin or RTC alarm */
+#define PWR_FLAG_SB PWR_CSR_SBF /*!< Standby flag */
+#define PWR_FLAG_PVDO PWR_CSR_PVDO /*!< Power Voltage Detector output flag */
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF /*!< VREFINT reference voltage ready */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3))
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extended module */
+#include "stm32f3xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr_ex.h
new file mode 100644
index 00000000..da99cd58
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr_ex.h
@@ -0,0 +1,338 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_EX_H
+#define __STM32F3xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Types PWR Extended Exported Types
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/** @defgroup PWREx_PVD_detection_level PWR Extended PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 /*!< PVD threshold around 2.2 V */
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 /*!< PVD threshold around 2.3 V */
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 /*!< PVD threshold around 2.4 V */
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 /*!< PVD threshold around 2.5 V */
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 /*!< PVD threshold around 2.6 V */
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 /*!< PVD threshold around 2.7 V */
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 /*!< PVD threshold around 2.8 V */
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 /*!< PVD threshold around 2.9 V */
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode PWR Extended PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
+#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+#define PWR_EXTI_LINE_PVD EXTI_IMR_MR16 /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup PWREx_SDADC_ANALOGx PWR Extended SDADC ANALOGx
+ * @{
+ */
+#define PWR_SDADC_ANALOG1 ((uint32_t)PWR_CR_ENSD1) /*!< Enable SDADC1 */
+#define PWR_SDADC_ANALOG2 ((uint32_t)PWR_CR_ENSD2) /*!< Enable SDADC2 */
+#define PWR_SDADC_ANALOG3 ((uint32_t)PWR_CR_ENSD3) /*!< Enable SDADC3 */
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWR Extended Exported Macros
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/**
+ * @brief Enable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief PVD EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_PWR_SDADC_ANALOG(SDADC) (((SDADC) == PWR_SDADC_ANALOG1) || \
+ ((SDADC) == PWR_SDADC_ANALOG2) || \
+ ((SDADC) == PWR_SDADC_ANALOG3))
+#endif /* STM32F373xC || STM32F378xx */
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+ * @{
+ */
+/* Peripheral Extended control functions **************************************/
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+void HAL_PWREx_EnableSDADC(uint32_t Analogx);
+void HAL_PWREx_DisableSDADC(uint32_t Analogx);
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc.h
new file mode 100644
index 00000000..decab31f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc.h
@@ -0,0 +1,1756 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_H
+#define __STM32F3xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @addtogroup RCC_Private_Constants
+ * @{
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
+
+/* Disable Backup domain write protection state change timeout */
+#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */
+/* LSE state change timeout */
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Register_Offset Register offsets
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+#define RCC_CR_OFFSET 0x00
+#define RCC_CFGR_OFFSET 0x04
+#define RCC_CIR_OFFSET 0x08
+#define RCC_BDCR_OFFSET 0x20
+#define RCC_CSR_OFFSET 0x24
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET)
+#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET)
+#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET)
+#define RCC_BDCR_OFFSET_BB (RCC_OFFSET + RCC_BDCR_OFFSET)
+#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET)
+
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_HSION_BIT_NUMBER POSITION_VAL(RCC_CR_HSION)
+#define RCC_CR_HSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSION_BIT_NUMBER * 4U)))
+/* Alias word address of HSEON bit */
+#define RCC_HSEON_BIT_NUMBER POSITION_VAL(RCC_CR_HSEON)
+#define RCC_CR_HSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSEON_BIT_NUMBER * 4U)))
+/* Alias word address of CSSON bit */
+#define RCC_CSSON_BIT_NUMBER POSITION_VAL(RCC_CR_CSSON)
+#define RCC_CR_CSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_CSSON_BIT_NUMBER * 4U)))
+/* Alias word address of PLLON bit */
+#define RCC_PLLON_BIT_NUMBER POSITION_VAL(RCC_CR_PLLON)
+#define RCC_CR_PLLON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_PLLON_BIT_NUMBER * 4U)))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_LSION_BIT_NUMBER POSITION_VAL(RCC_CSR_LSION)
+#define RCC_CSR_LSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_LSION_BIT_NUMBER * 4U)))
+
+/* Alias word address of RMVF bit */
+#define RCC_RMVF_BIT_NUMBER POSITION_VAL(RCC_CSR_RMVF)
+#define RCC_CSR_RMVF_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_RMVF_BIT_NUMBER * 4U)))
+
+/* --- BDCR Registers ---*/
+/* Alias word address of LSEON bit */
+#define RCC_LSEON_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEON)
+#define RCC_BDCR_LSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEON_BIT_NUMBER * 4U)))
+
+/* Alias word address of LSEON bit */
+#define RCC_LSEBYP_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEBYP)
+#define RCC_BDCR_LSEBYP_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEBYP_BIT_NUMBER * 4U)))
+
+/* Alias word address of RTCEN bit */
+#define RCC_RTCEN_BIT_NUMBER POSITION_VAL(RCC_BDCR_RTCEN)
+#define RCC_BDCR_RTCEN_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U)))
+
+/* Alias word address of BDRST bit */
+#define RCC_BDRST_BIT_NUMBER POSITION_VAL(RCC_BDCR_BDRST)
+#define RCC_BDCR_BDRST_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_BDRST_BIT_NUMBER * 4U)))
+
+/**
+ * @}
+ */
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U))
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U))
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U))
+
+/* Defines used for Flags */
+#define CR_REG_INDEX ((uint8_t)1U)
+#define BDCR_REG_INDEX ((uint8_t)2U)
+#define CSR_REG_INDEX ((uint8_t)3U)
+#define CFGR_REG_INDEX ((uint8_t)4U)
+
+#define RCC_FLAG_MASK ((uint8_t)0x1FU)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_PLLSOURCE_HSE))
+#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
+#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
+ ((__HSE__) == RCC_HSE_BYPASS))
+#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
+ ((__LSE__) == RCC_LSE_BYPASS))
+#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
+#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU)
+#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
+#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \
+ ((__PLL__) == RCC_PLL_ON))
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16))
+#else
+#define IS_RCC_PLL_DIV(__DIV__) (((__DIV__) == RCC_PLL_DIV2) || \
+ ((__DIV__) == RCC_PLL_DIV3) || ((__DIV__) == RCC_PLL_DIV4))
+#endif
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+#define IS_RCC_HSE_PREDIV(DIV) (((DIV) == RCC_HSE_PREDIV_DIV1) || ((DIV) == RCC_HSE_PREDIV_DIV2) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV3) || ((DIV) == RCC_HSE_PREDIV_DIV4) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV5) || ((DIV) == RCC_HSE_PREDIV_DIV6) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV7) || ((DIV) == RCC_HSE_PREDIV_DIV8) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV9) || ((DIV) == RCC_HSE_PREDIV_DIV10) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV11) || ((DIV) == RCC_HSE_PREDIV_DIV12) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV13) || ((DIV) == RCC_HSE_PREDIV_DIV14) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV15) || ((DIV) == RCC_HSE_PREDIV_DIV16))
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \
+ ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
+ ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
+ ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
+ ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \
+ ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \
+ ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \
+ ((__MUL__) == RCC_PLL_MUL16))
+#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2))
+#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
+#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV512))
+#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
+ ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
+ ((__PCLK__) == RCC_HCLK_DIV16))
+#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO)
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
+#if defined(RCC_CFGR3_USART2SW)
+#define IS_RCC_USART2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI))
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+#define IS_RCC_USART3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI))
+#endif /* RCC_CFGR3_USART3SW */
+#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
+
+#endif
+} RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ uint32_t HSEPredivValue; /*!< The HSE predivision factor value.
+ This parameter can be a value of @ref RCC_PLL_HSE_Prediv_Factor */
+
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+} RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+} RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< HSI clock selected as PLL entry clock source */
+#endif /* RCC_CFGR_PLLSRC_HSI_PREDIV */
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2 /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE (0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE (0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI (0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE (0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI (0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */
+#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */
+#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */
+#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */
+#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */
+#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
+
+#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */
+#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */
+#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */
+#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */
+#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */
+#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */
+#define RCC_CLOCKTYPE_PCLK2 (0x00000008U) /*!< PCLK2 to configure */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NO_CLK RCC_BDCR_RTCSEL_NOCLOCK /*!< No clock */
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+/**
+ * @}
+ */
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
+ * @{
+ */
+
+#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+/**
+ * @}
+ */
+
+#endif
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+/** @defgroup RCC_PLL_HSE_Prediv_Factor RCC PLL HSE Prediv Factor
+ * @{
+ */
+
+#define RCC_HSE_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+#if defined(RCC_CFGR3_USART2SW)
+/** @defgroup RCC_USART2_Clock_Source RCC USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+/** @defgroup RCC_USART3_Clock_Source RCC USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR3_USART3SW */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+/**
+ * @}
+ */
+/** @defgroup RCC_MCO_Index MCO Index
+ * @{
+ */
+#define RCC_MCO1 (0x00000000U)
+#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt Interrupts
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */
+#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */
+#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */
+#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */
+#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */
+#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag Flags
+ * Elements values convention: XXXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XXX : Register index
+ * - 001: CR register
+ * - 010: BDCR register
+ * - 011: CSR register
+ * - 100: CFGR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< Internal High Speed clock ready flag */
+#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_HSERDY))) /*!< External High Speed clock ready flag */
+#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL clock ready flag */
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< Internal Low Speed oscillator Ready */
+#if defined(RCC_CSR_V18PWRRSTF)
+#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_V18PWRRSTF)))
+#endif
+#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_OBLRSTF))) /*!< Options bytes loading reset flag */
+#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */
+#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_PORRSTF))) /*!< POR/PDR reset flag */
+#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */
+#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */
+#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */
+#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | POSITION_VAL(RCC_BDCR_LSERDY))) /*!< External Low Speed oscillator Ready */
+
+/* Flags in the CFGR register */
+#if defined(RCC_CFGR_MCOF)
+#define RCC_FLAG_MCO ((uint8_t)((CFGR_REG_INDEX << 5U) | POSITION_VAL(RCC_CFGR_MCOF))) /*!< Microcontroller Clock Output Flag */
+#endif /* RCC_CFGR_MCOF */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_FLITF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TSC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+#define __HAL_RCC_TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DAC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+#define __HAL_RCC_DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM16_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET)
+#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET)
+#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET)
+#define __HAL_RCC_TSC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET)
+
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET)
+#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET)
+#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET)
+#define __HAL_RCC_TSC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+#define __HAL_RCC_DAC1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+#define __HAL_RCC_DAC1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief EGet the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
+#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET)
+#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
+#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET)
+#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+#define __HAL_RCC_TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+#define __HAL_RCC_TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+#define __HAL_RCC_DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC1RST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U)
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+#define __HAL_RCC_DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \
+ (MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << POSITION_VAL(RCC_CR_HSITRIM)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
+
+/** @brief Macro to disable the Internal Low Speed oscillator (LSI).
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__ specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg @ref RCC_HSE_ON turn ON the HSE oscillator
+ * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) \
+ do{ \
+ if ((__STATE__) == RCC_HSE_ON) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else if ((__STATE__) == RCC_HSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_HSE_BYPASS) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ }while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__ specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg @ref RCC_LSE_ON turn ON the LSE oscillator.
+ * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ do{ \
+ if ((__STATE__) == RCC_LSE_ON) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else if ((__STATE__) == RCC_LSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_LSE_BYPASS) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ }while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ @if STM32F302xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F358xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F302xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F398xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F373xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F378xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F301x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F302x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F318xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F303x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F334x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F328xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ @if STM32F302xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F358xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F302xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F398xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F373xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F378xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F301x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F302x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F318xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F303x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F334x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F328xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+
+#if defined(RCC_CFGR3_USART2SW)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+#endif /* RCC_CFGR3_USART2SW */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
+
+/** @brief Macro to disable the main PLL.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ */
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
+
+
+/** @brief Get oscillator clock selected as PLL input clock
+ * @retval The clock source used for PLL entry. The returned value can be one
+ * of the following:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL input clock
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __SYSCLKSOURCE__ specifies the system clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source.
+ * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source.
+ * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1
+ * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2
+ * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4
+ * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8
+ * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16
+ * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32
+ * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64
+ * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128
+ */
+#else
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source
+ */
+#endif
+#if defined(RCC_CFGR_MCOPRE)
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+#else
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__))
+
+#endif
+
+/**
+ * @}
+ */
+
+ /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it cannot be changed unless the
+ * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by
+ * a Power On Reset (POR).
+ *
+ * @param __RTC_CLKSOURCE__ specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
+
+/** @brief Macro to enable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
+
+/** @brief Macro to disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macro to force the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_BDCR register.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
+
+/** @brief Macros to release the Backup domain reset.
+ */
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt.
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt.
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+ * @arg @ref RCC_IT_CSS Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+ * @arg @ref RCC_IT_CSS Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags.
+ * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)RCC_CSR_RMVF_BB = ENABLE)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready.
+ * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready.
+ * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready.
+ * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready.
+ * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready.
+ * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset
+ * @arg @ref RCC_FLAG_PINRST Pin reset.
+ * @arg @ref RCC_FLAG_PORRST POR/PDR reset.
+ * @arg @ref RCC_FLAG_SFTRST Software reset.
+ * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset.
+ * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset.
+ * @arg @ref RCC_FLAG_LPWRRST Low Power reset.
+ @if defined(STM32F301x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F302x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F302xC)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ * @arg @ref RCC_FLAG_MCO Microcontroller Clock Output
+ @endif
+ @if defined(STM32F302xE)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F303x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F303xC)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ * @arg @ref RCC_FLAG_MCO Microcontroller Clock Output
+ @endif
+ @if defined(STM32F303xE)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F334x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F358xx)
+ * @arg @ref RCC_FLAG_MCO Microcontroller Clock Output
+ @endif
+ @if defined(STM32F373xC)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \
+ (((__FLAG__) >> 5U) == BDCR_REG_INDEX)? RCC->BDCR : \
+ (((__FLAG__) >> 5U) == CFGR_REG_INDEX)? RCC->CFGR : \
+ RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f3xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc_ex.h
new file mode 100644
index 00000000..81a4da7a
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc_ex.h
@@ -0,0 +1,3843 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_EX_H
+#define __STM32F3xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/** @addtogroup RCCEx_Private_Macros
+ * @{
+ */
+
+#if defined(RCC_CFGR_PLLNODIV)
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2))
+#else
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2))
+#endif /* RCC_CFGR_PLLNODIV */
+
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F301x8 || STM32F318xx */
+#if defined(STM32F302x8)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302x8 */
+#if defined(STM32F302xC)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F302xC */
+#if defined(STM32F303xC)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F303xC */
+#if defined(STM32F302xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_TIM2 | RCC_PERIPHCLK_TIM34 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302xE */
+#if defined(STM32F303xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_TIM2 | RCC_PERIPHCLK_TIM34 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_TIM20))
+#endif /* STM32F303xE */
+#if defined(STM32F398xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM2 | \
+ RCC_PERIPHCLK_TIM34 | RCC_PERIPHCLK_TIM15 | \
+ RCC_PERIPHCLK_TIM16 | RCC_PERIPHCLK_TIM17 | \
+ RCC_PERIPHCLK_TIM20))
+#endif /* STM32F398xx */
+#if defined(STM32F358xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F358xx */
+#if defined(STM32F303x8)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F303x8 */
+#if defined(STM32F334x8)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_HRTIM1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F334x8 */
+#if defined(STM32F328xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F328xx */
+#if defined(STM32F373xC)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F373xC */
+#if defined(STM32F378xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC1PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PLLCLK_OFF) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV256))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#define IS_RCC_TIM2CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM2CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM2CLK_PLLCLK))
+#define IS_RCC_TIM3CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM34CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM34CLK_PLLCLK))
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_RCC_TIM20CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM20CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM20CLK_PLLCLK))
+#endif /* STM32F303xE || STM32F398xx */
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define IS_RCC_ADC34PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC34PLLCLK_OFF) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV256))
+#define IS_RCC_TIM8CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM8CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM8CLK_PLLCLK))
+#endif /* STM32F303xC || STM32F303xE || STM32F398xx || STM32F358xx */
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+#if defined(STM32F334x8)
+#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_HRTIM1CLK_PLLCLK))
+#endif /* STM32F334x8 */
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC1PCLK2_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PCLK2_DIV2) || ((ADCCLK) == RCC_ADC1PCLK2_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PCLK2_DIV6) || ((ADCCLK) == RCC_ADC1PCLK2_DIV8))
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#define IS_RCC_SDADCSYSCLK_DIV(DIV) (((DIV) == RCC_SDADCSYSCLK_DIV1) || ((DIV) == RCC_SDADCSYSCLK_DIV2) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV4) || ((DIV) == RCC_SDADCSYSCLK_DIV6) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV8) || ((DIV) == RCC_SDADCSYSCLK_DIV10) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV12) || ((DIV) == RCC_SDADCSYSCLK_DIV14) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV16) || ((DIV) == RCC_SDADCSYSCLK_DIV20) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV24) || ((DIV) == RCC_SDADCSYSCLK_DIV28) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV32) || ((DIV) == RCC_SDADCSYSCLK_DIV36) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV40) || ((DIV) == RCC_SDADCSYSCLK_DIV44) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV48))
+#endif /* STM32F373xC || STM32F378xx */
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLL) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLL_DIV1_5))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+#if defined(RCC_CFGR_MCOPRE)
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_4) || ((DIV) == RCC_MCODIV_8) || \
+ ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32) || \
+ ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128))
+#else
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1))
+#endif /* RCC_CFGR_MCOPRE */
+
+#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_HIGH))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xC */
+
+#if defined(STM32F302xE)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xE */
+
+#if defined(STM32F303xE)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t Tim20ClockSelection; /*!< TIM20 clock source
+ This parameter can be a value of @ref RCCEx_TIM20_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xE */
+
+#if defined(STM32F398xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t Tim20ClockSelection; /*!< TIM20 clock source
+ This parameter can be a value of @ref RCCEx_TIM20_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F398xx */
+
+#if defined(STM32F358xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Hrtim1ClockSelection; /*!< HRTIM1 clock source
+ This parameter can be a value of @ref RCCEx_HRTIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCC Extended Exported Constants
+ * @{
+ */
+/** @defgroup RCCEx_MCO_Clock_Source RCC Extended MCO Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE
+#if defined(RCC_CFGR_PLLNODIV)
+#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_PLLNODIV | RCC_CFGR_MCO_PLL)
+#endif /* RCC_CFGR_PLLNODIV */
+#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Extended Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_I2C3 (0x00008000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_TIM15 (0x00040000U)
+#define RCC_PERIPHCLK_TIM16 (0x00080000U)
+#define RCC_PERIPHCLK_TIM17 (0x00100000U)
+
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_I2C3 (0x00008000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+#define RCC_PERIPHCLK_TIM15 (0x00040000U)
+#define RCC_PERIPHCLK_TIM16 (0x00080000U)
+#define RCC_PERIPHCLK_TIM17 (0x00100000U)
+
+
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F303xC */
+
+#if defined(STM32F302xE)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+#define RCC_PERIPHCLK_I2C3 (0x00040000U)
+#define RCC_PERIPHCLK_TIM2 (0x00100000U)
+#define RCC_PERIPHCLK_TIM34 (0x00200000U)
+#define RCC_PERIPHCLK_TIM15 (0x00400000U)
+#define RCC_PERIPHCLK_TIM16 (0x00800000U)
+#define RCC_PERIPHCLK_TIM17 (0x01000000U)
+
+#endif /* STM32F302xE */
+
+#if defined(STM32F303xE)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+#define RCC_PERIPHCLK_I2C3 (0x00040000U)
+#define RCC_PERIPHCLK_TIM2 (0x00100000U)
+#define RCC_PERIPHCLK_TIM34 (0x00200000U)
+#define RCC_PERIPHCLK_TIM15 (0x00400000U)
+#define RCC_PERIPHCLK_TIM16 (0x00800000U)
+#define RCC_PERIPHCLK_TIM17 (0x01000000U)
+#define RCC_PERIPHCLK_TIM20 (0x02000000U)
+
+#endif /* STM32F303xE */
+
+#if defined(STM32F398xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_I2C3 (0x00040000U)
+#define RCC_PERIPHCLK_TIM2 (0x00100000U)
+#define RCC_PERIPHCLK_TIM34 (0x00200000U)
+#define RCC_PERIPHCLK_TIM15 (0x00400000U)
+#define RCC_PERIPHCLK_TIM16 (0x00800000U)
+#define RCC_PERIPHCLK_TIM17 (0x01000000U)
+#define RCC_PERIPHCLK_TIM20 (0x02000000U)
+
+
+#endif /* STM32F398xx */
+
+#if defined(STM32F358xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_HRTIM1 (0x00004000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_SDADC (0x00000800U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_SDADC (0x00000800U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK1
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCC Extended I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source RCC Extended ADC1 Clock Source
+ * @{
+ */
+#define RCC_ADC1PLLCLK_OFF RCC_CFGR2_ADC1PRES_NO
+#define RCC_ADC1PLLCLK_DIV1 RCC_CFGR2_ADC1PRES_DIV1
+#define RCC_ADC1PLLCLK_DIV2 RCC_CFGR2_ADC1PRES_DIV2
+#define RCC_ADC1PLLCLK_DIV4 RCC_CFGR2_ADC1PRES_DIV4
+#define RCC_ADC1PLLCLK_DIV6 RCC_CFGR2_ADC1PRES_DIV6
+#define RCC_ADC1PLLCLK_DIV8 RCC_CFGR2_ADC1PRES_DIV8
+#define RCC_ADC1PLLCLK_DIV10 RCC_CFGR2_ADC1PRES_DIV10
+#define RCC_ADC1PLLCLK_DIV12 RCC_CFGR2_ADC1PRES_DIV12
+#define RCC_ADC1PLLCLK_DIV16 RCC_CFGR2_ADC1PRES_DIV16
+#define RCC_ADC1PLLCLK_DIV32 RCC_CFGR2_ADC1PRES_DIV32
+#define RCC_ADC1PLLCLK_DIV64 RCC_CFGR2_ADC1PRES_DIV64
+#define RCC_ADC1PLLCLK_DIV128 RCC_CFGR2_ADC1PRES_DIV128
+#define RCC_ADC1PLLCLK_DIV256 RCC_CFGR2_ADC1PRES_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source RCC Extended TIM15 Clock Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source RCC Extended TIM16 Clock Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source RCC Extended TIM17 Clock Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK2
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+/**
+ * @}
+ */
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCC Extended UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCC Extended UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK2
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCC Extended I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM2_Clock_Source RCC Extended TIM2 Clock Source
+ * @{
+ */
+#define RCC_TIM2CLK_HCLK RCC_CFGR3_TIM2SW_HCLK
+#define RCC_TIM2CLK_PLLCLK RCC_CFGR3_TIM2SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM34_Clock_Source RCC Extended TIM3 & TIM4 Clock Source
+ * @{
+ */
+#define RCC_TIM34CLK_HCLK RCC_CFGR3_TIM34SW_HCLK
+#define RCC_TIM34CLK_PLLCLK RCC_CFGR3_TIM34SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source RCC Extended TIM15 Clock Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source RCC Extended TIM16 Clock Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source RCC Extended TIM17 Clock Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCC Extended UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCC Extended UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup RCCEx_TIM20_Clock_Source RCC Extended TIM20 Clock Source
+ * @{
+ */
+#define RCC_TIM20CLK_HCLK RCC_CFGR3_TIM20SW_HCLK
+#define RCC_TIM20CLK_PLLCLK RCC_CFGR3_TIM20SW_PLL
+
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_ADC34_Clock_Source RCC Extended ADC34 Clock Source
+ * @{
+ */
+
+/* ADC3 & ADC4 */
+#define RCC_ADC34PLLCLK_OFF RCC_CFGR2_ADCPRE34_NO
+#define RCC_ADC34PLLCLK_DIV1 RCC_CFGR2_ADCPRE34_DIV1
+#define RCC_ADC34PLLCLK_DIV2 RCC_CFGR2_ADCPRE34_DIV2
+#define RCC_ADC34PLLCLK_DIV4 RCC_CFGR2_ADCPRE34_DIV4
+#define RCC_ADC34PLLCLK_DIV6 RCC_CFGR2_ADCPRE34_DIV6
+#define RCC_ADC34PLLCLK_DIV8 RCC_CFGR2_ADCPRE34_DIV8
+#define RCC_ADC34PLLCLK_DIV10 RCC_CFGR2_ADCPRE34_DIV10
+#define RCC_ADC34PLLCLK_DIV12 RCC_CFGR2_ADCPRE34_DIV12
+#define RCC_ADC34PLLCLK_DIV16 RCC_CFGR2_ADCPRE34_DIV16
+#define RCC_ADC34PLLCLK_DIV32 RCC_CFGR2_ADCPRE34_DIV32
+#define RCC_ADC34PLLCLK_DIV64 RCC_CFGR2_ADCPRE34_DIV64
+#define RCC_ADC34PLLCLK_DIV128 RCC_CFGR2_ADCPRE34_DIV128
+#define RCC_ADC34PLLCLK_DIV256 RCC_CFGR2_ADCPRE34_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM8_Clock_Source RCC Extended TIM8 Clock Source
+ * @{
+ */
+#define RCC_TIM8CLK_HCLK RCC_CFGR3_TIM8SW_HCLK
+#define RCC_TIM8CLK_PLLCLK RCC_CFGR3_TIM8SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F303xC || STM32F303xE || STM32F398xx || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK1
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @defgroup RCCEx_HRTIM1_Clock_Source RCC Extended HRTIM1 Clock Source
+ * @{
+ */
+#define RCC_HRTIM1CLK_HCLK RCC_CFGR3_HRTIM1SW_HCLK
+#define RCC_HRTIM1CLK_PLLCLK RCC_CFGR3_HRTIM1SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK2
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source RCC Extended ADC1 Clock Source
+ * @{
+ */
+
+/* ADC1 */
+#define RCC_ADC1PCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
+#define RCC_ADC1PCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
+#define RCC_ADC1PCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
+#define RCC_ADC1PCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCC Extended CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADC_Clock_Prescaler RCC Extended SDADC Clock Prescaler
+ * @{
+ */
+#define RCC_SDADCSYSCLK_DIV1 RCC_CFGR_SDPRE_DIV1
+#define RCC_SDADCSYSCLK_DIV2 RCC_CFGR_SDPRE_DIV2
+#define RCC_SDADCSYSCLK_DIV4 RCC_CFGR_SDPRE_DIV4
+#define RCC_SDADCSYSCLK_DIV6 RCC_CFGR_SDPRE_DIV6
+#define RCC_SDADCSYSCLK_DIV8 RCC_CFGR_SDPRE_DIV8
+#define RCC_SDADCSYSCLK_DIV10 RCC_CFGR_SDPRE_DIV10
+#define RCC_SDADCSYSCLK_DIV12 RCC_CFGR_SDPRE_DIV12
+#define RCC_SDADCSYSCLK_DIV14 RCC_CFGR_SDPRE_DIV14
+#define RCC_SDADCSYSCLK_DIV16 RCC_CFGR_SDPRE_DIV16
+#define RCC_SDADCSYSCLK_DIV20 RCC_CFGR_SDPRE_DIV20
+#define RCC_SDADCSYSCLK_DIV24 RCC_CFGR_SDPRE_DIV24
+#define RCC_SDADCSYSCLK_DIV28 RCC_CFGR_SDPRE_DIV28
+#define RCC_SDADCSYSCLK_DIV32 RCC_CFGR_SDPRE_DIV32
+#define RCC_SDADCSYSCLK_DIV36 RCC_CFGR_SDPRE_DIV36
+#define RCC_SDADCSYSCLK_DIV40 RCC_CFGR_SDPRE_DIV40
+#define RCC_SDADCSYSCLK_DIV44 RCC_CFGR_SDPRE_DIV44
+#define RCC_SDADCSYSCLK_DIV48 RCC_CFGR_SDPRE_DIV48
+
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+/** @defgroup RCCEx_USB_Clock_Source RCC Extended USB Clock Source
+ * @{
+ */
+
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE_DIV1
+#define RCC_USBCLKSOURCE_PLL_DIV1_5 RCC_CFGR_USBPRE_DIV1_5
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCC Extended MCOx Clock Prescaler
+ * @{
+ */
+#if defined(RCC_CFGR_MCOPRE)
+
+#define RCC_MCODIV_1 (0x00000000U)
+#define RCC_MCODIV_2 (0x10000000U)
+#define RCC_MCODIV_4 (0x20000000U)
+#define RCC_MCODIV_8 (0x30000000U)
+#define RCC_MCODIV_16 (0x40000000U)
+#define RCC_MCODIV_32 (0x50000000U)
+#define RCC_MCODIV_64 (0x60000000U)
+#define RCC_MCODIV_128 (0x70000000U)
+
+#else
+
+#define RCC_MCODIV_1 (0x00000000U)
+
+#endif /* RCC_CFGR_MCOPRE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration
+ * @{
+ */
+
+#define RCC_LSEDRIVE_LOW (0x00000000U) /*!< Xtal mode lower driving capability */
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCC Extended Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_PLL_Configuration RCC Extended PLL Configuration
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+/** @brief Macro to configure the PLL clock source, multiplication and division factors.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
+ * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+ * @param __PLLMUL__ specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
+ do { \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
+ } while(0U)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+/** @brief Macro to configure the PLL clock source and multiplication factor.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
+ * @param __PLLMUL__ specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PLLMUL__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_HSE_Configuration RCC Extended HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__))
+
+/**
+ * @brief Macro to get prediv1 factor for PLL.
+ */
+#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV)
+
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+
+/** @defgroup RCCEx_AHB_Clock_Enable_Disable RCC Extended AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_ADC12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+#define __HAL_RCC_ADC2_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#define __HAL_RCC_ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#define __HAL_RCC_ADC2_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_ADC34_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC34EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC34EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_ADC34_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC34EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_ADC12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+#define __HAL_RCC_ADC2_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+
+#define __HAL_RCC_ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#define __HAL_RCC_ADC2_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FMCEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOGEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOHEN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable RCC Extended APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DAC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM18_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM18EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM18EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DAC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_TIM18_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM18EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) \
+ || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define __HAL_RCC_USB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable RCC Extended APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HAL_RCC_HRTIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_HRTIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_HRTIM1EN))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM19_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM19EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM19EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SDADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SDADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SDADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_TIM19_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM19EN))
+#define __HAL_RCC_SDADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC1EN))
+#define __HAL_RCC_SDADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC2EN))
+#define __HAL_RCC_SDADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC3EN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_TIM20_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM20EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM20EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM20_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM20EN))
+#endif /* STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Peripheral_Clock_Enable_Disable_Status RCC Extended AHB Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC1EN)) != RESET)
+
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC1EN)) == RESET)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_ADC12_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) != RESET)
+
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_ADC12_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_ADC34_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC34EN)) != RESET)
+
+#define __HAL_RCC_ADC34_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC34EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_ADC12_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) != RESET)
+
+#define __HAL_RCC_ADC12_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) == RESET)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FMCEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOHEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FMCEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOHEN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable_Status RCC Extended APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_DAC2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) != RESET)
+
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_DAC2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) == RESET)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_TIM18_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM18EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_DAC2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_TIM18_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM18EN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_DAC2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) \
+ || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
+
+#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CANEN)) != RESET)
+
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CANEN)) == RESET)
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable_Status RCC Extended APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HAL_RCC_HRTIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_HRTIM1EN)) != RESET)
+
+#define __HAL_RCC_HRTIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_HRTIM1EN)) == RESET)
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_TIM19_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM19EN)) != RESET)
+#define __HAL_RCC_SDADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC1EN)) != RESET)
+#define __HAL_RCC_SDADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC2EN)) != RESET)
+#define __HAL_RCC_SDADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC3EN)) != RESET)
+
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_TIM19_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM19EN)) == RESET)
+#define __HAL_RCC_SDADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC1EN)) == RESET)
+#define __HAL_RCC_SDADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC2EN)) == RESET)
+#define __HAL_RCC_SDADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC3EN)) == RESET)
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_TIM20_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM20EN)) != RESET)
+
+#define __HAL_RCC_TIM20_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM20EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Force_Release_Reset RCC Extended AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC1RST))
+
+#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+#define __HAL_RCC_ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+#define __HAL_RCC_ADC2_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#define __HAL_RCC_ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#define __HAL_RCC_ADC2_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_ADC34_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC34RST))
+
+#define __HAL_RCC_ADC34_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC34RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+#define __HAL_RCC_ADC2_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+
+#define __HAL_RCC_ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#define __HAL_RCC_ADC2_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_FMCRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOHRST))
+
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_FMCRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOHRST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset RCC Extended APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_TIM18_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM18RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_TIM18_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM18RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset RCC Extended APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HAL_RCC_HRTIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_HRTIM1RST))
+
+#define __HAL_RCC_HRTIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_HRTIM1RST))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM19_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM19RST))
+#define __HAL_RCC_SDADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC1RST))
+#define __HAL_RCC_SDADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC2RST))
+#define __HAL_RCC_SDADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC3RST))
+
+#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM19_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM19RST))
+#define __HAL_RCC_SDADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC1RST))
+#define __HAL_RCC_SDADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC2RST))
+#define __HAL_RCC_SDADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC3RST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_TIM20_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM20RST))
+
+#define __HAL_RCC_TIM20_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM20RST))
+#endif /* STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__ specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__ specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__ specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__ specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2Sx_Clock_Config RCC Extended I2Sx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__ specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__ specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC1PLLCLK_OFF ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADC1PRES, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC1PLLCLK_OFF ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADC1PRES)))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__ specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__ specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2Sx_Clock_Config RCC Extended I2Sx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__ specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UARTx_Clock_Config RCC Extended UARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the UART4 clock (UART4CLK).
+ * @param __UART4CLKSource__ specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART4SW, (uint32_t)(__UART4CLKSource__))
+
+/** @brief Macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART4SW)))
+
+/** @brief Macro to configure the UART5 clock (UART5CLK).
+ * @param __UART5CLKSource__ specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART5SW, (uint32_t)(__UART5CLKSource__))
+
+/** @brief Macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART5SW)))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC3 & ADC4 clock (ADC34CLK).
+ * @param __ADC34CLKSource__ specifies the ADC3 & ADC4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC34PLLCLK_OFF ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV1 PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV2 PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV4 PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV6 PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV8 PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV10 PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV12 PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV16 PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV32 PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV64 PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV128 PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV256 PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_ADC34_CONFIG(__ADC34CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE34, (uint32_t)(__ADC34CLKSource__))
+
+/** @brief Macro to get the ADC3 & ADC4 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC34PLLCLK_OFF ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV1 PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV2 PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV4 PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV6 PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV8 PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV10 PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV12 PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV16 PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV32 PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV64 PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV128 PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV256 PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_GET_ADC34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE34)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the TIM8 clock (TIM8CLK).
+ * @param __TIM8CLKSource__ specifies the TIM8 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM8CLK_HCLK HCLK selected as TIM8 clock
+ * @arg @ref RCC_TIM8CLK_PLLCLK PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_TIM8_CONFIG(__TIM8CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM8SW, (uint32_t)(__TIM8CLKSource__))
+
+/** @brief Macro to get the TIM8 clock (TIM8CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM8CLK_HCLK HCLK selected as TIM8 clock
+ * @arg @ref RCC_TIM8CLK_PLLCLK PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_GET_TIM8_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM8SW)))
+
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__ specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__ specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+/**
+ * @}
+ */
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/** @defgroup RCCEx_HRTIMx_Clock_Config RCC Extended HRTIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the HRTIM1 clock.
+ * @param __HRTIM1CLKSource__ specifies the HRTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_HRTIM1CLK_HCLK HCLK selected as HRTIM1 clock
+ * @arg @ref RCC_HRTIM1CLK_PLLCLK PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_HRTIM1SW, (uint32_t)(__HRTIM1CLKSource__))
+
+/** @brief Macro to get the HRTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_HRTIM1CLK_HCLK HCLK selected as HRTIM1 clock
+ * @arg @ref RCC_HRTIM1CLK_PLLCLK PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_HRTIM1SW)))
+/**
+ * @}
+ */
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__ specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC1PCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock (ADC1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC1PCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADCx_Clock_Config RCC Extended SDADCx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the SDADCx clock (SDADCxCLK).
+ * @param __SDADCPrescaler__ specifies the SDADCx system clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SDADCSYSCLK_DIV1 SYSCLK clock selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV2 SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV4 SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV6 SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV8 SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV10 SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV12 SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV14 SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV16 SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV20 SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV24 SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV28 SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV32 SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV36 SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV40 SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV44 SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV48 SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_SDADC_CONFIG(__SDADCPrescaler__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SDPRE, (uint32_t)(__SDADCPrescaler__))
+
+/** @brief Macro to get the SDADCx clock prescaler.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_SDADCSYSCLK_DIV1 SYSCLK clock selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV2 SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV4 SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV6 SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV8 SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV10 SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV12 SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV14 SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV16 SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV20 SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV24 SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV28 SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV32 SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV36 SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV40 SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV44 SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV48 SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_GET_SDADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SDPRE)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CECx_Clock_Config RCC Extended CECx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__ specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+
+/** @defgroup RCCEx_USBx_Clock_Config RCC Extended USBx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock divided by 1 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock divided by 1 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM2 clock (TIM2CLK).
+ * @param __TIM2CLKSource__ specifies the TIM2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM2CLK_HCLK HCLK selected as TIM2 clock
+ * @arg @ref RCC_TIM2CLK_PLL PLL Clock selected as TIM2 clock
+ */
+#define __HAL_RCC_TIM2_CONFIG(__TIM2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM2SW, (uint32_t)(__TIM2CLKSource__))
+
+/** @brief Macro to get the TIM2 clock (TIM2CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM2CLK_HCLK HCLK selected as TIM2 clock
+ * @arg @ref RCC_TIM2CLK_PLL PLL Clock selected as TIM2 clock
+ */
+#define __HAL_RCC_GET_TIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM2SW)))
+
+/** @brief Macro to configure the TIM3 & TIM4 clock (TIM34CLK).
+ * @param __TIM34CLKSource__ specifies the TIM3 & TIM4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM34CLK_HCLK HCLK selected as TIM3 & TIM4 clock
+ * @arg @ref RCC_TIM34CLK_PLL PLL Clock selected as TIM3 & TIM4 clock
+ */
+#define __HAL_RCC_TIM34_CONFIG(__TIM34CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM34SW, (uint32_t)(__TIM34CLKSource__))
+
+/** @brief Macro to get the TIM3 & TIM4 clock (TIM34CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM34CLK_HCLK HCLK selected as TIM3 & TIM4 clock
+ * @arg @ref RCC_TIM34CLK_PLL PLL Clock selected as TIM3 & TIM4 clock
+ */
+#define __HAL_RCC_GET_TIM34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM34SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__ specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__ specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__ specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/**
+ * @}
+ */
+
+#endif /* STM32f302xE || STM32f303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @addtogroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM20 clock (TIM20CLK).
+ * @param __TIM20CLKSource__ specifies the TIM20 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM20CLK_HCLK HCLK selected as TIM20 clock
+ * @arg @ref RCC_TIM20CLK_PLL PLL Clock selected as TIM20 clock
+ */
+#define __HAL_RCC_TIM20_CONFIG(__TIM20CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM20SW, (uint32_t)(__TIM20CLKSource__))
+
+/** @brief Macro to get the TIM20 clock (TIM20CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM20CLK_HCLK HCLK selected as TIM20 clock
+ * @arg @ref RCC_TIM20CLK_PLL PLL Clock selected as TIM20 clock
+ */
+#define __HAL_RCC_GET_TIM20_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM20SW)))
+
+/**
+ * @}
+ */
+#endif /* STM32f303xE || STM32F398xx */
+
+/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability.
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+ * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\
+ RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim.h
new file mode 100644
index 00000000..df34ae0d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim.h
@@ -0,0 +1,1623 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_H
+#define __STM32F3xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1U) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
+ This parameter can be a value of @ref TIM_AutoReloadPreload */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+} TIM_Encoder_InitTypeDef;
+
+
+/**
+ * @brief TIM Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief TIM Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIMEx_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIMEx_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref TIM_DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING (0x00000000U) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED (0x0000U) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 (0x0000U) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2U */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4U */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8U */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP (0x0000U)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 (0x0000U)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+ * @{
+ */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE (0x0000U) /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE (TIM_CR1_ARPE) /*!< TIMx_ARR register is buffered */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE (0x0000U)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH (0x0000U)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH (0x0000U)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1U, 2U, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1U, 2U, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1U, 2U, 3 or 4 is selected to be connected to TRC */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 (0x0000U) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE (0x0000U)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#if defined(TIM_SR_B2IF)
+#define TIM_FLAG_BREAK2 (TIM_SR_B2IF)
+#endif
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 (0x0000U)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR Off State Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI Off State Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF (0x0000U)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable Disable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW (0x0000U)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET (0x0000U)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE (0x0080U)
+#define TIM_MASTERSLAVEMODE_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 (0x0000U)
+#define TIM_TS_ITR1 (0x0010U)
+#define TIM_TS_ITR2 (0x0020U)
+#define TIM_TS_ITR3 (0x0030U)
+#define TIM_TS_TI1F_ED (0x0040U)
+#define TIM_TS_TI1FP1 (0x0050U)
+#define TIM_TS_TI2FP2 (0x0060U)
+#define TIM_TS_ETRF (0x0070U)
+#define TIM_TS_NONE (0xFFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+ /** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 (0x0000U)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000U)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100U)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200U)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300U)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400U)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500U)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600U)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700U)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800U)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900U)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00U)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00U)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00U)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00U)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00U)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00U)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000U)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0U) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1U) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2U) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3U) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4U) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5U) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6U) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE (0x0001U)
+#define TIM_CCx_DISABLE (0x0000U)
+#define TIM_CCxN_ENABLE (0x0004U)
+#define TIM_CCxN_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0U)
+/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0U)
+
+/* The Main Output Enable of a timer instance is disabled unconditionally */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled uncondiotionally
+ */
+#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
+
+/**
+ * @brief Enables the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Enables the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/**
+ * @brief Disables the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/**
+ * @brief Checks whether the specified TIM interrupt flag is set or not.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the specified TIM interrupt flag.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+ * @brief Checks whether the specified TIM interrupt has occurred or not.
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the TIM interrupt source to check.
+ * @retval The state of TIM_IT (SET or RESET).
+ */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TIM interrupt pending bits
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * @retval None
+ */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Indicates whether or not the TIM Counter is used as downcounter
+ * @param __HANDLE__ TIM handle.
+ * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+ * @note This macro is particularly usefull to get the counting mode when the timer operates in Center-aligned mode or Encoder mode.
+ */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+ * @brief Sets the TIM active prescaler register value on update event.
+ * @param __HANDLE__ TIM handle.
+ * @param __PRESC__ specifies the active prescaler register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __COUNTER__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) \
+ ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __AUTORELOAD__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0U)
+
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \
+ ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CKD__ specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0U)
+
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval The clock division can be one of the following values:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0U)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval The input capture prescaler can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__ TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__ TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * (+) Counter overflow/underflow
+ * (+) Setting the UG bit
+ * (+) Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Sets the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__ Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0U)
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Private Constants -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+ * @{
+ */
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+ * @}
+ */
+/* End of private constants --------------------------------------------------*/
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+ ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FFU) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+/** @brief Set TIM IC prescaler
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @param __ICPSC__ specifies the prescaler value.
+ * @retval None
+ */
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+/** @brief Reset TIM IC prescaler
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @retval None
+ */
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+/** @brief Set TIM IC polarity
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @param __POLARITY__ specifies TIM Channel Polarity
+ * @retval None
+ */
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
+
+/** @brief Reset TIM IC polarity
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @retval None
+ */
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/* Include TIM HAL Extended module */
+#include "stm32f3xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private Functions --------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim_ex.h
new file mode 100644
index 00000000..d5dcde5d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim_ex.h
@@ -0,0 +1,1243 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_EX_H
+#define __STM32F3xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIMEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+} TIM_HallSensor_InitTypeDef;
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: timer instances provide a single TRGO
+ * output
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: single break input with configurable polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the brek input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note Advanced timers provide TRGO2 internal line which is redirected
+ * to the ADC
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Channel TIMEx Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 (0x0000U)
+#define TIM_CHANNEL_2 (0x0004U)
+#define TIM_CHANNEL_3 (0x0008U)
+#define TIM_CHANNEL_4 (0x000CU)
+#define TIM_CHANNEL_ALL (0x0018U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING (0x0000U)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR (0x0001U)
+#define TIM_CLEARINPUTSOURCE_NONE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE (0x0000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Event_Source TIMEx Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1U */
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2U */
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3U */
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4U */
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_DMA_Base_address TIMEx DMA BAse Address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_OR (0x00000013U)
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Channel TIMEx Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 (0x0000U)
+#define TIM_CHANNEL_2 (0x0004U)
+#define TIM_CHANNEL_3 (0x0008U)
+#define TIM_CHANNEL_4 (0x000CU)
+#define TIM_CHANNEL_5 (0x0010U)
+#define TIM_CHANNEL_6 (0x0014U)
+#define TIM_CHANNEL_ALL (0x003CU)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING (0x0000U)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR (0x0001U)
+#define TIM_CLEARINPUTSOURCE_OCREFCLR (0x0002U)
+#define TIM_CLEARINPUTSOURCE_NONE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable TIMEX Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE (0x00000000U)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Polarity TIMEx Break Input 2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW (0x00000000U)
+#define TIM_BREAK2POLARITY_HIGH ((uint32_t)TIM_BDTR_BK2P)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIMEx Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET (0x00000000U)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE (0x0000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIMEx Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1U */
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2U */
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3U */
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4U */
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
+#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIMEx DMA Base Address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_CCMR3 (0x00000015U)
+#define TIM_DMABASE_CCR5 (0x00000016U)
+#define TIM_DMABASE_CCR6 (0x00000017U)
+#define TIM_DMABASE_OR (0x00000018U)
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Remap TIMEx Remapping
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+/**
+ * @}
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+
+#if defined(STM32F334x8)
+/** @defgroup TIMEx_Remap TIMEx Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIMEx Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC2_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC2_AWD1 (0x00000004U) /*!< TIM1_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM1_ADC2_AWD2 (0x00000008U) /*!< TIM1_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM1_ADC2_AWD3 (0x0000000CU) /*!< TIM1_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_NONE (0x00000000U) /*!< Non significant value for TIM16U */
+/**
+ * @}
+ */
+#endif /* STM32F334x8 */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup TIMEx_Remap TIMEx Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001U) /*!< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002U) /*!< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003U) /*!< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIMEx Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004U) /*!< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008U) /*!< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000CU) /*!< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004U) /*!< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008U) /*!< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000CU) /*!< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000U) /*!< Non significant value for TIM16U */
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup TIMEx_Remap TIMEx Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001U) /*!< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002U) /*!< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003U) /*!< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+#define TIM_TIM20_ADC3_NONE (0x00000000U) /*!< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC3_AWD1 (0x00000001U) /*!< TIM20_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM20_ADC3_AWD2 (0x00000002U) /*!< TIM20_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM20_ADC3_AWD3 (0x00000003U) /*!< TIM20_ETR is connected to ADC3 AWD3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIMEx Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004U) /*!< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008U) /*!< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000CU) /*!< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004U) /*!< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008U) /*!< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000CU) /*!< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000U) /*!< Non significant value for TIM16U */
+#define TIM_TIM20_ADC4_NONE (0x00000000U) /*!< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC4_AWD1 (0x00000004U) /*!< TIM20_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM20_ADC4_AWD2 (0x00000008U) /*!< TIM20_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM20_ADC4_AWD3 (0x0000000CU) /*!< TIM20_ETR is connected to ADC4 AWD3 */
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Remap TIMEx remapping
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000U) /*!< TIM8 TRGOUT is connected to TIM2_ITR1 */
+#define TIM_TIM2_ETH_PTP (0x00000400U) /*!< PTP trigger output is connected to TIM2_ITR1 */
+#define TIM_TIM2_USBFS_SOF (0x00000800U) /*!< OTG FS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM2_USBHS_SOF (0x00000C00U) /*!< OTG HS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM14_GPIO (0x00000000U) /*!< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001U) /*!< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002U) /*!< TIM14 TI1 is connected to HSE/32U */
+#define TIM_TIM14_MCO (0x00000003U) /*!< TIM14 TI1 is connected to MCO */
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Group_Channel5 Group Channel 5 and Channel 1U, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE 0x00000000 /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_DCR) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+
+#define IS_TIM_BREAK_FILTER(BRKFILTER) ((BRKFILTER) <= 0xFU)
+
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+
+#define IS_TIM_BREAK2_POLARITY(POLARITY) (((POLARITY) == TIM_BREAK2POLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAK2POLARITY_HIGH))
+
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFE00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_CCMR3) || \
+ ((BASE) == TIM_DMABASE_CCR5) || \
+ ((BASE) == TIM_DMABASE_CCR6) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP) == TIM_TIM16_GPIO) ||\
+ ((REMAP) == TIM_TIM16_RTC) ||\
+ ((REMAP) == TIM_TIM16_HSE) ||\
+ ((REMAP) == TIM_TIM16_MCO))
+
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+#if defined(STM32F334x8)
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC2_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC2_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC2_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC2_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_NONE) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD1) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD2) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD3))
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD3))
+
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM2_TIM8_TRGO) ||\
+ ((REMAP) == TIM_TIM2_ETH_PTP) ||\
+ ((REMAP) == TIM_TIM2_USBFS_SOF) ||\
+ ((REMAP) == TIM_TIM2_USBHS_SOF) ||\
+ ((REMAP) == TIM_TIM14_GPIO) ||\
+ ((REMAP) == TIM_TIM14_RTC) ||\
+ ((REMAP) == TIM_TIM14_HSE) ||\
+ ((REMAP) == TIM_TIM14_MCO))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFFU) == 0x00000000U))
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU)
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIMEx Exported Macros
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))
+
+/**
+ * @brief Sets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE))
+
+/**
+ * @brief Resets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+
+/**
+ * @brief Sets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE))
+
+/**
+ * @brief Resets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE))
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F334x8)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2);
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extended Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extended Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_bus.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_bus.h
new file mode 100644
index 00000000..b0b6975f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_bus.h
@@ -0,0 +1,1079 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_bus.h
+ * @author MCD Application Team
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_BUS_H
+#define __STM32F3xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
+#if defined(DMA2)
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
+#endif /*DMA2*/
+#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
+#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
+#if defined(FMC_Bank1)
+#define LL_AHB1_GRP1_PERIPH_FMC RCC_AHBENR_FMCEN
+#endif /*FMC_Bank1*/
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
+#if defined(GPIOH)
+#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHBENR_GPIOHEN
+#endif /*GPIOH*/
+#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN
+#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN
+#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN
+#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN
+#if defined(GPIOE)
+#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN
+#endif /*GPIOE*/
+#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN
+#if defined(GPIOG)
+#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHBENR_GPIOGEN
+#endif /*GPIOH*/
+#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN
+#if defined(RCC_AHBENR_ADC1EN)
+#define LL_AHB1_GRP1_PERIPH_ADC1 RCC_AHBENR_ADC1EN
+#endif /*RCC_AHBENR_ADC1EN*/
+#if defined(ADC1_2_COMMON)
+#define LL_AHB1_GRP1_PERIPH_ADC12 RCC_AHBENR_ADC12EN
+#endif /*ADC1_2_COMMON*/
+#if defined(ADC3_4_COMMON)
+#define LL_AHB1_GRP1_PERIPH_ADC34 RCC_AHBENR_ADC34EN
+#endif /*ADC3_4_COMMON*/
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
+#if defined(TIM3)
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
+#endif /*TIM3*/
+#if defined(TIM4)
+#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN
+#endif /*TIM4*/
+#if defined(TIM5)
+#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN
+#endif /*TIM5*/
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
+#if defined(TIM7)
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
+#endif /*TIM7*/
+#if defined(TIM12)
+#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN
+#endif /*TIM12*/
+#if defined(TIM13)
+#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN
+#endif /*TIM13*/
+#if defined(TIM14)
+#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
+#endif /*TIM14*/
+#if defined(TIM18)
+#define LL_APB1_GRP1_PERIPH_TIM18 RCC_APB1ENR_TIM18EN
+#endif /*TIM18*/
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
+#if defined(SPI2)
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
+#endif /*SPI2*/
+#if defined(SPI3)
+#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN
+#endif /*SPI3*/
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
+#if defined(UART4)
+#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN
+#endif /*UART4*/
+#if defined(UART5)
+#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN
+#endif /*UART5*/
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
+#if defined(I2C2)
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
+#endif /*I2C2*/
+#if defined(USB)
+#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
+#endif /*USB*/
+#if defined(CAN)
+#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
+#endif /*CAN*/
+#if defined(DAC2)
+#define LL_APB1_GRP1_PERIPH_DAC2 RCC_APB1ENR_DAC2EN
+#endif /*DAC2*/
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DAC1EN
+#if defined(CEC)
+#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
+#endif /*CEC*/
+#if defined(I2C3)
+#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN
+#endif /*I2C3*/
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#if defined(RCC_APB2ENR_ADC1EN)
+#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
+#endif /*RCC_APB2ENR_ADC1EN*/
+#if defined(TIM1)
+#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#endif /*TIM1*/
+#if defined(SPI1)
+#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#endif /*SPI1*/
+#if defined(TIM8)
+#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
+#endif /*TIM8*/
+#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#if defined(SPI4)
+#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN
+#endif /*SPI4*/
+#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
+#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
+#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
+#if defined(TIM19)
+#define LL_APB2_GRP1_PERIPH_TIM19 RCC_APB2ENR_TIM19EN
+#endif /*TIM19*/
+#if defined(TIM20)
+#define LL_APB2_GRP1_PERIPH_TIM20 RCC_APB2ENR_TIM20EN
+#endif /*TIM20*/
+#if defined(HRTIM1)
+#define LL_APB2_GRP1_PERIPH_HRTIM1 RCC_APB2ENR_HRTIM1EN
+#endif /*HRTIM1*/
+#if defined(SDADC1)
+#define LL_APB2_GRP1_PERIPH_SDADC1 RCC_APB2ENR_SDADC1EN
+#endif /*SDADC1*/
+#if defined(SDADC2)
+#define LL_APB2_GRP1_PERIPH_SDADC2 RCC_APB2ENR_SDADC2EN
+#endif /*SDADC2*/
+#if defined(SDADC3)
+#define LL_APB2_GRP1_PERIPH_SDADC3 RCC_APB2ENR_SDADC3EN
+#endif /*SDADC3*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR FMCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOHEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOGEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR ADC1EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR ADC12EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR ADC34EN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC34 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHBENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHBENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR FMCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR ADC1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR ADC12EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR ADC34EN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC34 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR FMCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOHEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOGEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR ADC1EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR ADC12EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR ADC34EN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC34 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHBENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHBRSTR FMCRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR ADC1RST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR ADC12RST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR ADC34RST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC34 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHBRSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHBRSTR FMCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR ADC1RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR ADC12RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR ADC34RST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ADC34 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHBRSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1 APB1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM18EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR DAC2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR DAC1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM18 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM18EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR DAC2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR DAC1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM18 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM18EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR DAC2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR DAC1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM18 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM18RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR DAC2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR DAC1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM18 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM18RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR DAC2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR DAC1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM18 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB2 APB2
+ * @{
+ */
+
+/**
+ * @brief Enable APB2 peripherals clock.
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM19EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM20EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR HRTIM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDADC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDADC2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDADC3EN LL_APB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM19 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB2 peripheral clock is enabled or not
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM19EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM20EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR HRTIM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDADC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDADC2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDADC3EN LL_APB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM19 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB2 peripherals clock.
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM19EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM20EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR HRTIM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDADC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDADC2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDADC3EN LL_APB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM19 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB2 peripherals reset.
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR ADC1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM19RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM20RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR HRTIM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDADC1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDADC2RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDADC3RST LL_APB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM19 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB2 peripherals reset.
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR ADC1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM19RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM20RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR HRTIM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDADC1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDADC2RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDADC3RST LL_APB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM19 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM20 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDADC3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_cortex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_cortex.h
new file mode 100644
index 00000000..6d714371
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_cortex.h
@@ -0,0 +1,656 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL CORTEX driver contains a set of generic APIs that can be
+ used by user:
+ (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
+ functions
+ (+) Low power mode configuration (SCB register of Cortex-MCU)
+ (+) MPU API to configure and enable regions
+ (MPU services provided only on some devices)
+ (+) API to access to MCU info (CPUID register)
+ (+) API to enable fault handler (SHCSR accesses)
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_CORTEX_H
+#define __STM32F3xx_LL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX_LL CORTEX
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
+ * @{
+ */
+#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
+#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
+ * @{
+ */
+#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
+#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
+#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
+/**
+ * @}
+ */
+
+#if __MPU_PRESENT
+
+/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
+ * @{
+ */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
+#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
+#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
+ * @{
+ */
+#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
+#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
+#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
+#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
+#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
+#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
+#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
+#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
+ * @{
+ */
+#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
+ * @{
+ */
+#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
+#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
+#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
+#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
+#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
+#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
+ * @{
+ */
+#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
+#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
+#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
+#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
+ * @{
+ */
+#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
+#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
+ * @{
+ */
+#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
+#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
+ * @{
+ */
+#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
+#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
+ * @{
+ */
+#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
+#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
+ * @{
+ */
+
+/**
+ * @brief This function checks if the Systick counter flag is active or not.
+ * @note It can be used in timeout function on application side.
+ * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+ return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+
+/**
+ * @brief Configures the SysTick clock source
+ * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
+{
+ if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
+ {
+ SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+ }
+ else
+ {
+ CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+ }
+}
+
+/**
+ * @brief Get the SysTick clock source
+ * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
+{
+ return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+}
+
+/**
+ * @brief Enable SysTick exception request
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
+{
+ SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+ * @brief Disable SysTick exception request
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
+{
+ CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+ * @brief Checks if the SYSTICK interrupt is enabled or disabled.
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
+{
+ return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
+ * @{
+ */
+
+/**
+ * @brief Processor uses sleep as its low power mode
+ * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableSleep(void)
+{
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Processor uses deep sleep as its low power mode
+ * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
+{
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
+ * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
+ * empty main application.
+ * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Do not sleep when returning to Thread mode.
+ * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
+ * processor.
+ * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
+{
+ /* Set SEVEONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
+ * excluded
+ * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
+{
+ /* Clear SEVEONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
+ * @{
+ */
+
+/**
+ * @brief Enable a fault in System handler control register (SHCSR)
+ * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
+ * @param Fault This parameter can be a combination of the following values:
+ * @arg @ref LL_HANDLER_FAULT_USG
+ * @arg @ref LL_HANDLER_FAULT_BUS
+ * @arg @ref LL_HANDLER_FAULT_MEM
+ * @retval None
+ */
+__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
+{
+ /* Enable the system handler fault */
+ SET_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+ * @brief Disable a fault in System handler control register (SHCSR)
+ * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
+ * @param Fault This parameter can be a combination of the following values:
+ * @arg @ref LL_HANDLER_FAULT_USG
+ * @arg @ref LL_HANDLER_FAULT_BUS
+ * @arg @ref LL_HANDLER_FAULT_MEM
+ * @retval None
+ */
+__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
+{
+ /* Disable the system handler fault */
+ CLEAR_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
+ * @{
+ */
+
+/**
+ * @brief Get Implementer code
+ * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
+ * @retval Value should be equal to 0x41 for ARM
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
+}
+
+/**
+ * @brief Get Variant number (The r value in the rnpn product revision identifier)
+ * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
+ * @retval Value between 0 and 255 (0x0: revision 0)
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
+}
+
+/**
+ * @brief Get Constant number
+ * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
+ * @retval Value should be equal to 0xF for Cortex-M4 devices
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
+}
+
+/**
+ * @brief Get Part number
+ * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
+ * @retval Value should be equal to 0xC24 for Cortex-M4
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
+}
+
+/**
+ * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
+ * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
+ * @retval Value between 0 and 255 (0x1: patch 1)
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
+}
+
+/**
+ * @}
+ */
+
+#if __MPU_PRESENT
+/** @defgroup CORTEX_LL_EF_MPU MPU
+ * @{
+ */
+
+/**
+ * @brief Enable MPU with input options
+ * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
+ * @param Options This parameter can be one of the following values:
+ * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
+ * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
+ * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
+ * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
+{
+ /* Enable the MPU*/
+ WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
+ /* Ensure MPU settings take effects */
+ __DSB();
+ /* Sequence instruction fetches using update settings */
+ __ISB();
+}
+
+/**
+ * @brief Disable MPU
+ * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_Disable(void)
+{
+ /* Make sure outstanding transfers are done */
+ __DMB();
+ /* Disable MPU*/
+ WRITE_REG(MPU->CTRL, 0U);
+}
+
+/**
+ * @brief Check if MPU is enabled or not
+ * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
+{
+ return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
+}
+
+/**
+ * @brief Enable a MPU region
+ * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
+ * @param Region This parameter can be one of the following values:
+ * @arg @ref LL_MPU_REGION_NUMBER0
+ * @arg @ref LL_MPU_REGION_NUMBER1
+ * @arg @ref LL_MPU_REGION_NUMBER2
+ * @arg @ref LL_MPU_REGION_NUMBER3
+ * @arg @ref LL_MPU_REGION_NUMBER4
+ * @arg @ref LL_MPU_REGION_NUMBER5
+ * @arg @ref LL_MPU_REGION_NUMBER6
+ * @arg @ref LL_MPU_REGION_NUMBER7
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
+{
+ /* Set Region number */
+ WRITE_REG(MPU->RNR, Region);
+ /* Enable the MPU region */
+ SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+ * @brief Configure and enable a region
+ * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
+ * MPU_RBAR REGION LL_MPU_ConfigRegion\n
+ * MPU_RBAR ADDR LL_MPU_ConfigRegion\n
+ * MPU_RASR XN LL_MPU_ConfigRegion\n
+ * MPU_RASR AP LL_MPU_ConfigRegion\n
+ * MPU_RASR S LL_MPU_ConfigRegion\n
+ * MPU_RASR C LL_MPU_ConfigRegion\n
+ * MPU_RASR B LL_MPU_ConfigRegion\n
+ * MPU_RASR SIZE LL_MPU_ConfigRegion
+ * @param Region This parameter can be one of the following values:
+ * @arg @ref LL_MPU_REGION_NUMBER0
+ * @arg @ref LL_MPU_REGION_NUMBER1
+ * @arg @ref LL_MPU_REGION_NUMBER2
+ * @arg @ref LL_MPU_REGION_NUMBER3
+ * @arg @ref LL_MPU_REGION_NUMBER4
+ * @arg @ref LL_MPU_REGION_NUMBER5
+ * @arg @ref LL_MPU_REGION_NUMBER6
+ * @arg @ref LL_MPU_REGION_NUMBER7
+ * @param Address Value of region base address
+ * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
+ * @param Attributes This parameter can be a combination of the following values:
+ * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
+ * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
+ * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
+ * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
+ * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
+ * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
+ * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
+ * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
+ * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
+ * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
+ * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
+ * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
+ * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
+{
+ /* Set Region number */
+ WRITE_REG(MPU->RNR, Region);
+ /* Set base address */
+ WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
+ /* Configure MPU */
+ WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
+}
+
+/**
+ * @brief Disable a region
+ * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
+ * MPU_RASR ENABLE LL_MPU_DisableRegion
+ * @param Region This parameter can be one of the following values:
+ * @arg @ref LL_MPU_REGION_NUMBER0
+ * @arg @ref LL_MPU_REGION_NUMBER1
+ * @arg @ref LL_MPU_REGION_NUMBER2
+ * @arg @ref LL_MPU_REGION_NUMBER3
+ * @arg @ref LL_MPU_REGION_NUMBER4
+ * @arg @ref LL_MPU_REGION_NUMBER5
+ * @arg @ref LL_MPU_REGION_NUMBER6
+ * @arg @ref LL_MPU_REGION_NUMBER7
+ * @retval None
+ */
+__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
+{
+ /* Set Region number */
+ WRITE_REG(MPU->RNR, Region);
+ /* Disable the MPU region */
+ CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+ * @}
+ */
+
+#endif /* __MPU_PRESENT */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_CORTEX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_dma.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_dma.h
new file mode 100644
index 00000000..8c952ce3
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_dma.h
@@ -0,0 +1,2012 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_DMA_H
+#define __STM32F3xx_LL_DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Variables DMA Private Variables
+ * @{
+ */
+/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */
+static const uint8_t CHANNEL_OFFSET_TAB[] =
+{
+ (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE)
+};
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_Private_Macros DMA Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
+ * @{
+ */
+typedef struct
+{
+ uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer
+ or as Source base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer
+ or as Destination base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_LL_EC_DIRECTION
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */
+
+ uint32_t Mode; /*!< Specifies the normal or circular operation mode.
+ This parameter can be a value of @ref DMA_LL_EC_MODE
+ @note: The circular buffer mode cannot be used if the memory to memory
+ data transfer direction is configured on the selected Channel
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */
+
+ uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_PERIPH
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */
+
+ uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_MEMORY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */
+
+ uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */
+
+ uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */
+
+ uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit.
+ The data unit is equal to the source buffer configuration set in PeripheralSize
+ or MemorySize parameters depending in the transfer direction.
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
+
+ uint32_t Priority; /*!< Specifies the channel priority level.
+ This parameter can be a value of @ref DMA_LL_EC_PRIORITY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */
+
+} LL_DMA_InitTypeDef;
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
+ * @{
+ */
+/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_DMA_WriteReg function
+ * @{
+ */
+#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */
+#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */
+#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */
+#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */
+#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */
+#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */
+#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */
+#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */
+#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */
+#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */
+#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */
+#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */
+#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */
+#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */
+#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */
+#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */
+#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */
+#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */
+#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */
+#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */
+#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_DMA_ReadReg function
+ * @{
+ */
+#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */
+#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */
+#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */
+#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */
+#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */
+#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */
+#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */
+#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */
+#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */
+#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */
+#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */
+#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */
+#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */
+#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */
+#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */
+#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */
+#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */
+#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */
+#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */
+#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */
+#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */
+#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */
+#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */
+#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */
+#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */
+#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */
+#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */
+#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions
+ * @{
+ */
+#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */
+#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */
+#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
+ * @{
+ */
+#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */
+#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */
+#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */
+#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */
+#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */
+#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */
+#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */
+#endif /*USE_FULL_LL_DRIVER*/
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction
+ * @{
+ */
+#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MODE Transfer mode
+ * @{
+ */
+#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */
+#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode
+ * @{
+ */
+#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */
+#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MEMORY Memory increment mode
+ * @{
+ */
+#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */
+#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment
+ * @{
+ */
+#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
+#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
+#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment
+ * @{
+ */
+#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
+#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
+#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level
+ * @{
+ */
+#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
+#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */
+#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */
+#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
+ * @{
+ */
+/**
+ * @brief Write a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely
+ * @{
+ */
+/**
+ * @brief Convert DMAx_Channely into DMAx
+ * @param __CHANNEL_INSTANCE__ DMAx_Channely
+ * @retval DMAx
+ */
+#if defined(DMA2)
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1)
+#else
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1)
+#endif
+
+/**
+ * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y
+ * @param __CHANNEL_INSTANCE__ DMAx_Channely
+ * @retval LL_DMA_CHANNEL_y
+ */
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#else
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#endif
+#else
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#endif
+
+/**
+ * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely
+ * @param __DMA_INSTANCE__ DMAx
+ * @param __CHANNEL__ LL_DMA_CHANNEL_y
+ * @retval DMAx_Channely
+ */
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \
+ DMA2_Channel7)
+#else
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ DMA1_Channel7)
+#endif
+#else
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ DMA1_Channel7)
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_LL_EF_Configuration Configuration
+ * @{
+ */
+/**
+ * @brief Enable DMA channel.
+ * @rmtoll CCR EN LL_DMA_EnableChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
+}
+
+/**
+ * @brief Disable DMA channel.
+ * @rmtoll CCR EN LL_DMA_DisableChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
+}
+
+/**
+ * @brief Check if DMA channel is enabled or disabled.
+ * @rmtoll CCR EN LL_DMA_IsEnabledChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_EN) == (DMA_CCR_EN));
+}
+
+/**
+ * @brief Configure all parameters link to DMA transfer.
+ * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n
+ * CCR MEM2MEM LL_DMA_ConfigTransfer\n
+ * CCR CIRC LL_DMA_ConfigTransfer\n
+ * CCR PINC LL_DMA_ConfigTransfer\n
+ * CCR MINC LL_DMA_ConfigTransfer\n
+ * CCR PSIZE LL_DMA_ConfigTransfer\n
+ * CCR MSIZE LL_DMA_ConfigTransfer\n
+ * CCR PL LL_DMA_ConfigTransfer
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR
+ * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
+ * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
+ * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL,
+ Configuration);
+}
+
+/**
+ * @brief Set Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n
+ * CCR MEM2MEM LL_DMA_SetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction);
+}
+
+/**
+ * @brief Get Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n
+ * CCR MEM2MEM LL_DMA_GetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM));
+}
+
+/**
+ * @brief Set DMA mode circular or normal.
+ * @note The circular buffer mode cannot be used if the memory-to-memory
+ * data transfer is configured on the selected Channel.
+ * @rmtoll CCR CIRC LL_DMA_SetMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC,
+ Mode);
+}
+
+/**
+ * @brief Get DMA mode circular or normal.
+ * @rmtoll CCR CIRC LL_DMA_GetMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_CIRC));
+}
+
+/**
+ * @brief Set Peripheral increment mode.
+ * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC,
+ PeriphOrM2MSrcIncMode);
+}
+
+/**
+ * @brief Get Peripheral increment mode.
+ * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PINC));
+}
+
+/**
+ * @brief Set Memory increment mode.
+ * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryOrM2MDstIncMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC,
+ MemoryOrM2MDstIncMode);
+}
+
+/**
+ * @brief Get Memory increment mode.
+ * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_MINC));
+}
+
+/**
+ * @brief Set Peripheral size.
+ * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE,
+ PeriphOrM2MSrcDataSize);
+}
+
+/**
+ * @brief Get Peripheral size.
+ * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PSIZE));
+}
+
+/**
+ * @brief Set Memory size.
+ * @rmtoll CCR MSIZE LL_DMA_SetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryOrM2MDstDataSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE,
+ MemoryOrM2MDstDataSize);
+}
+
+/**
+ * @brief Get Memory size.
+ * @rmtoll CCR MSIZE LL_DMA_GetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_MSIZE));
+}
+
+/**
+ * @brief Set Channel priority level.
+ * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Priority This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL,
+ Priority);
+}
+
+/**
+ * @brief Get Channel priority level.
+ * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PL));
+}
+
+/**
+ * @brief Set Number of data to transfer.
+ * @note This action has no effect if
+ * channel is enabled.
+ * @rmtoll CNDTR NDT LL_DMA_SetDataLength
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
+ DMA_CNDTR_NDT, NbData);
+}
+
+/**
+ * @brief Get Number of data to transfer.
+ * @note Once the channel is enabled, the return value indicate the
+ * remaining bytes to be transmitted.
+ * @rmtoll CNDTR NDT LL_DMA_GetDataLength
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
+ DMA_CNDTR_NDT));
+}
+
+/**
+ * @brief Configure the Source and Destination addresses.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr).
+ * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n
+ * CMAR MA LL_DMA_ConfigAddresses
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress,
+ uint32_t DstAddress, uint32_t Direction)
+{
+ /* Direction Memory to Periph */
+ if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
+ {
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, SrcAddress);
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DstAddress);
+ }
+ /* Direction Periph to Memory and Memory to Memory */
+ else
+ {
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, SrcAddress);
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DstAddress);
+ }
+}
+
+/**
+ * @brief Set the Memory address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CMAR MA LL_DMA_SetMemoryAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Peripheral address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CPAR PA LL_DMA_SetPeriphAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, PeriphAddress);
+}
+
+/**
+ * @brief Get Memory address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @rmtoll CMAR MA LL_DMA_GetMemoryAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
+}
+
+/**
+ * @brief Get Peripheral address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @rmtoll CPAR PA LL_DMA_GetPeriphAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
+}
+
+/**
+ * @brief Set the Memory to Memory Source address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Memory to Memory Destination address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
+}
+
+/**
+ * @brief Get the Memory to Memory Source address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
+}
+
+/**
+ * @brief Get the Memory to Memory Destination address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Channel 1 global interrupt flag.
+ * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1));
+}
+
+/**
+ * @brief Get Channel 2 global interrupt flag.
+ * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2));
+}
+
+/**
+ * @brief Get Channel 3 global interrupt flag.
+ * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3));
+}
+
+/**
+ * @brief Get Channel 4 global interrupt flag.
+ * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4));
+}
+
+/**
+ * @brief Get Channel 5 global interrupt flag.
+ * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5));
+}
+
+/**
+ * @brief Get Channel 6 global interrupt flag.
+ * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6));
+}
+
+/**
+ * @brief Get Channel 7 global interrupt flag.
+ * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7));
+}
+
+/**
+ * @brief Get Channel 1 transfer complete flag.
+ * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1));
+}
+
+/**
+ * @brief Get Channel 2 transfer complete flag.
+ * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2));
+}
+
+/**
+ * @brief Get Channel 3 transfer complete flag.
+ * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3));
+}
+
+/**
+ * @brief Get Channel 4 transfer complete flag.
+ * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4));
+}
+
+/**
+ * @brief Get Channel 5 transfer complete flag.
+ * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5));
+}
+
+/**
+ * @brief Get Channel 6 transfer complete flag.
+ * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6));
+}
+
+/**
+ * @brief Get Channel 7 transfer complete flag.
+ * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7));
+}
+
+/**
+ * @brief Get Channel 1 half transfer flag.
+ * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1));
+}
+
+/**
+ * @brief Get Channel 2 half transfer flag.
+ * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2));
+}
+
+/**
+ * @brief Get Channel 3 half transfer flag.
+ * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3));
+}
+
+/**
+ * @brief Get Channel 4 half transfer flag.
+ * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4));
+}
+
+/**
+ * @brief Get Channel 5 half transfer flag.
+ * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5));
+}
+
+/**
+ * @brief Get Channel 6 half transfer flag.
+ * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6));
+}
+
+/**
+ * @brief Get Channel 7 half transfer flag.
+ * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7));
+}
+
+/**
+ * @brief Get Channel 1 transfer error flag.
+ * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1));
+}
+
+/**
+ * @brief Get Channel 2 transfer error flag.
+ * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2));
+}
+
+/**
+ * @brief Get Channel 3 transfer error flag.
+ * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3));
+}
+
+/**
+ * @brief Get Channel 4 transfer error flag.
+ * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4));
+}
+
+/**
+ * @brief Get Channel 5 transfer error flag.
+ * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5));
+}
+
+/**
+ * @brief Get Channel 6 transfer error flag.
+ * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6));
+}
+
+/**
+ * @brief Get Channel 7 transfer error flag.
+ * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7));
+}
+
+/**
+ * @brief Clear Channel 1 global interrupt flag.
+ * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1);
+}
+
+/**
+ * @brief Clear Channel 2 global interrupt flag.
+ * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2);
+}
+
+/**
+ * @brief Clear Channel 3 global interrupt flag.
+ * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3);
+}
+
+/**
+ * @brief Clear Channel 4 global interrupt flag.
+ * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4);
+}
+
+/**
+ * @brief Clear Channel 5 global interrupt flag.
+ * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5);
+}
+
+/**
+ * @brief Clear Channel 6 global interrupt flag.
+ * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6);
+}
+
+/**
+ * @brief Clear Channel 7 global interrupt flag.
+ * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7);
+}
+
+/**
+ * @brief Clear Channel 1 transfer complete flag.
+ * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1);
+}
+
+/**
+ * @brief Clear Channel 2 transfer complete flag.
+ * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2);
+}
+
+/**
+ * @brief Clear Channel 3 transfer complete flag.
+ * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3);
+}
+
+/**
+ * @brief Clear Channel 4 transfer complete flag.
+ * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4);
+}
+
+/**
+ * @brief Clear Channel 5 transfer complete flag.
+ * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5);
+}
+
+/**
+ * @brief Clear Channel 6 transfer complete flag.
+ * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6);
+}
+
+/**
+ * @brief Clear Channel 7 transfer complete flag.
+ * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7);
+}
+
+/**
+ * @brief Clear Channel 1 half transfer flag.
+ * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1);
+}
+
+/**
+ * @brief Clear Channel 2 half transfer flag.
+ * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2);
+}
+
+/**
+ * @brief Clear Channel 3 half transfer flag.
+ * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3);
+}
+
+/**
+ * @brief Clear Channel 4 half transfer flag.
+ * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4);
+}
+
+/**
+ * @brief Clear Channel 5 half transfer flag.
+ * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5);
+}
+
+/**
+ * @brief Clear Channel 6 half transfer flag.
+ * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6);
+}
+
+/**
+ * @brief Clear Channel 7 half transfer flag.
+ * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7);
+}
+
+/**
+ * @brief Clear Channel 1 transfer error flag.
+ * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1);
+}
+
+/**
+ * @brief Clear Channel 2 transfer error flag.
+ * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2);
+}
+
+/**
+ * @brief Clear Channel 3 transfer error flag.
+ * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3);
+}
+
+/**
+ * @brief Clear Channel 4 transfer error flag.
+ * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4);
+}
+
+/**
+ * @brief Clear Channel 5 transfer error flag.
+ * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5);
+}
+
+/**
+ * @brief Clear Channel 6 transfer error flag.
+ * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6);
+}
+
+/**
+ * @brief Clear Channel 7 transfer error flag.
+ * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_IT_Management IT_Management
+ * @{
+ */
+/**
+ * @brief Enable Transfer complete interrupt.
+ * @rmtoll CCR TCIE LL_DMA_EnableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+ * @brief Enable Half transfer interrupt.
+ * @rmtoll CCR HTIE LL_DMA_EnableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+ * @brief Enable Transfer error interrupt.
+ * @rmtoll CCR TEIE LL_DMA_EnableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+ * @brief Disable Transfer complete interrupt.
+ * @rmtoll CCR TCIE LL_DMA_DisableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+ * @brief Disable Half transfer interrupt.
+ * @rmtoll CCR HTIE LL_DMA_DisableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+ * @brief Disable Transfer error interrupt.
+ * @rmtoll CCR TEIE LL_DMA_DisableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+ * @brief Check if Transfer complete Interrupt is enabled.
+ * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_TCIE) == (DMA_CCR_TCIE));
+}
+
+/**
+ * @brief Check if Half transfer Interrupt is enabled.
+ * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_HTIE) == (DMA_CCR_HTIE));
+}
+
+/**
+ * @brief Check if Transfer error Interrupt is enabled.
+ * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_TEIE) == (DMA_CCR_TEIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct);
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel);
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_exti.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_exti.h
new file mode 100644
index 00000000..a10d1cc0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_exti.h
@@ -0,0 +1,1399 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_exti.h
+ * @author MCD Application Team
+ * @brief Header file of EXTI LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_EXTI_H
+#define __STM32F3xx_LL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private Macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
+ * @{
+ */
+typedef struct
+{
+
+ uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
+ This parameter can be any combination of @ref EXTI_LL_EC_LINE */
+#if defined(EXTI_32_63_SUPPORT)
+
+ uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63
+ This parameter can be any combination of @ref EXTI_LL_EC_LINE */
+#endif
+
+ FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
+ This parameter can be set either to ENABLE or DISABLE */
+
+ uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
+ This parameter can be a value of @ref EXTI_LL_EC_MODE. */
+
+ uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
+} LL_EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
+ * @{
+ */
+
+/** @defgroup EXTI_LL_EC_LINE LINE
+ * @{
+ */
+#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
+#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
+#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
+#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
+#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
+#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
+#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
+#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
+#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
+#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
+#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
+#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
+#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
+#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
+#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
+#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
+#if defined(EXTI_IMR_IM16)
+#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
+#endif
+#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
+#if defined(EXTI_IMR_IM18)
+#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
+#endif
+#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
+#if defined(EXTI_IMR_IM20)
+#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
+#endif
+#if defined(EXTI_IMR_IM21)
+#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
+#endif
+#if defined(EXTI_IMR_IM22)
+#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
+#endif
+#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
+#if defined(EXTI_IMR_IM24)
+#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
+#endif
+#if defined(EXTI_IMR_IM25)
+#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
+#endif
+#if defined(EXTI_IMR_IM26)
+#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
+#endif
+#if defined(EXTI_IMR_IM27)
+#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
+#endif
+#if defined(EXTI_IMR_IM28)
+#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
+#endif
+#if defined(EXTI_IMR_IM29)
+#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
+#endif
+#if defined(EXTI_IMR_IM30)
+#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
+#endif
+#if defined(EXTI_IMR_IM31)
+#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
+#endif
+#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
+
+#if defined(EXTI_32_63_SUPPORT)
+#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */
+#if defined(EXTI_IMR2_IM33)
+#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */
+#endif
+#if defined(EXTI_IMR2_IM34)
+#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */
+#endif
+#if defined(EXTI_IMR2_IM35)
+#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */
+#endif
+#if defined(EXTI_IMR2_IM36)
+#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */
+#endif
+#if defined(EXTI_IMR2_IM37)
+#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */
+#endif
+#if defined(EXTI_IMR2_IM38)
+#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */
+#endif
+#if defined(EXTI_IMR2_IM39)
+#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */
+#endif
+#if defined(EXTI_IMR2_IM40)
+#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */
+#endif
+#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/
+
+#endif
+
+#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
+
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/**
+ * @}
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/** @defgroup EXTI_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
+#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
+#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
+ * @{
+ */
+#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
+#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
+#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
+#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
+
+/**
+ * @}
+ */
+
+
+#endif /*USE_FULL_LL_DRIVER*/
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
+ * @{
+ */
+
+/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in EXTI register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in EXTI register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
+ * @{
+ */
+/** @defgroup EXTI_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->IMR, ExtiLine);
+}
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63
+ * @note The reset value for the direct lines (lines from 32 to 34, line
+ * 39) is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_32
+ * @arg @ref LL_EXTI_LINE_33
+ * @arg @ref LL_EXTI_LINE_34
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @arg @ref LL_EXTI_LINE_39
+ * @arg @ref LL_EXTI_LINE_ALL_32_63
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->IMR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->IMR, ExtiLine);
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63
+ * @note The reset value for the direct lines (lines from 32 to 34, line
+ * 39) is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_32
+ * @arg @ref LL_EXTI_LINE_33
+ * @arg @ref LL_EXTI_LINE_34
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @arg @ref LL_EXTI_LINE_39
+ * @arg @ref LL_EXTI_LINE_ALL_32_63
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->IMR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63
+ * @note The reset value for the direct lines (lines from 32 to 34, line
+ * 39) is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_32
+ * @arg @ref LL_EXTI_LINE_33
+ * @arg @ref LL_EXTI_LINE_34
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @arg @ref LL_EXTI_LINE_39
+ * @arg @ref LL_EXTI_LINE_ALL_32_63
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine));
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Event_Management Event_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Event request for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->EMR, ExtiLine);
+
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Enable ExtiLine Event request for Lines in range 32 to 63
+ * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_32
+ * @arg @ref LL_EXTI_LINE_33
+ * @arg @ref LL_EXTI_LINE_34
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @arg @ref LL_EXTI_LINE_39
+ * @arg @ref LL_EXTI_LINE_ALL_32_63
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->EMR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Disable ExtiLine Event request for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->EMR, ExtiLine);
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Disable ExtiLine Event request for Lines in range 32 to 63
+ * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_32
+ * @arg @ref LL_EXTI_LINE_33
+ * @arg @ref LL_EXTI_LINE_34
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @arg @ref LL_EXTI_LINE_39
+ * @arg @ref LL_EXTI_LINE_ALL_32_63
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->EMR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
+
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63
+ * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_32
+ * @arg @ref LL_EXTI_LINE_33
+ * @arg @ref LL_EXTI_LINE_34
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @arg @ref LL_EXTI_LINE_39
+ * @arg @ref LL_EXTI_LINE_ALL_32_63
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine));
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->RTSR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->RTSR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
+ * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63
+ * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine));
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->FTSR, ExtiLine);
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a Falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->FTSR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a Falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for the same interrupt line.
+ * In this case, both generate a trigger condition.
+ * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->FTSR, ExtiLine);
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a Falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for the same interrupt line.
+ * In this case, both generate a trigger condition.
+ * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->FTSR2, ExtiLine);
+}
+#endif
+
+/**
+ * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
+ * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63
+ * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine));
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
+ * @{
+ */
+
+/**
+ * @brief Generate a software Interrupt Event for Lines in range 0 to 31
+ * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
+ * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
+ * resulting in an interrupt request generation.
+ * This bit is cleared by clearing the corresponding bit in the EXTI_PR
+ * register (by writing a 1 into the bit)
+ * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->SWIER, ExtiLine);
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Generate a software Interrupt Event for Lines in range 32 to 63
+ * @note If the interrupt is enabled on this line inthe EXTI_IMR2, writing a 1 to
+ * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2
+ * resulting in an interrupt request generation.
+ * This bit is cleared by clearing the corresponding bit in the EXTI_PR2
+ * register (by writing a 1 into the bit)
+ * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->SWIER2, ExtiLine);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
+ * @{
+ */
+
+/**
+ * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine));
+}
+#endif
+
+/**
+ * @brief Read ExtLine Combination Flag for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval @note This bit is set when the selected edge event arrives on the interrupt
+ */
+__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
+{
+ return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+
+/**
+ * @brief Read ExtLine Combination Flag for Lines in range 32 to 63
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval @note This bit is set when the selected edge event arrives on the interrupt
+ */
+__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine)
+{
+ return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine));
+}
+#endif
+
+/**
+ * @brief Clear ExtLine Flags for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
+{
+ WRITE_REG(EXTI->PR, ExtiLine);
+}
+
+#if defined(EXTI_32_63_SUPPORT)
+/**
+ * @brief Clear ExtLine Flags for Lines in range 32 to 63
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_35
+ * @arg @ref LL_EXTI_LINE_36
+ * @arg @ref LL_EXTI_LINE_37
+ * @arg @ref LL_EXTI_LINE_38
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine)
+{
+ WRITE_REG(EXTI->PR2, ExtiLine);
+}
+#endif
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+uint32_t LL_EXTI_DeInit(void);
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* EXTI */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_gpio.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_gpio.h
new file mode 100644
index 00000000..e2e158c5
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_gpio.h
@@ -0,0 +1,995 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_GPIO_H
+#define __STM32F3xx_LL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH)
+
+/** @defgroup GPIO_LL GPIO
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL GPIO Init Structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_LL_EC_PIN */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_MODE.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_SPEED.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
+
+ uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
+
+ uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_PULL.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
+
+ uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_AF.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
+} LL_GPIO_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EC_PIN PIN
+ * @{
+ */
+#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */
+#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */
+#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */
+#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */
+#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */
+#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */
+#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */
+#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */
+#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */
+#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */
+#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */
+#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */
+#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */
+#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */
+#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */
+#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */
+#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \
+ GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \
+ GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \
+ GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \
+ GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \
+ GPIO_BSRR_BS_15) /*!< Select all pins */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */
+#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_OUTPUT Output Type
+ * @{
+ */
+#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_SPEED Output Speed
+ * @{
+ */
+#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
+#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */
+#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
+ * @{
+ */
+#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
+#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_AF Alternate Function
+ * @{
+ */
+#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
+#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
+#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
+#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
+#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
+#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
+#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
+#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
+#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
+#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
+#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
+#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */
+#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */
+#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */
+#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */
+#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
+ * @{
+ */
+
+/**
+ * @brief Configure gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_SetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
+{
+ MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_GetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->MODER,
+ (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @param OutputType This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
+{
+ MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
+}
+
+/**
+ * @brief Return gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin));
+}
+
+/**
+ * @brief Configure gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Speed This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
+{
+ MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)),
+ (Speed << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OSPEEDR,
+ (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Pull This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
+{
+ MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->PUPDR,
+ (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U)),
+ (Alternate << (POSITION_VAL(Pin) * 4U)));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[0],
+ (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U)),
+ (Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[1],
+ (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U));
+}
+
+
+/**
+ * @brief Lock configuration of several pins for a dedicated port.
+ * @note When the lock sequence has been applied on a port bit, the
+ * value of this port bit can no longer be modified until the
+ * next reset.
+ * @note Each lock bit freezes a specific configuration register
+ * (control and alternate function registers).
+ * @rmtoll LCKR LCKK LL_GPIO_LockPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ __IO uint32_t temp;
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ WRITE_REG(GPIOx->LCKR, PinMask);
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ temp = READ_REG(GPIOx->LCKR);
+ (void) temp;
+}
+
+/**
+ * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
+ * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
+ * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
+ * @param GPIOx GPIO Port
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
+{
+ return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EF_Data_Access Data Access
+ * @{
+ */
+
+/**
+ * @brief Return full input data register value for a dedicated port.
+ * @rmtoll IDR IDy LL_GPIO_ReadInputPort
+ * @param GPIOx GPIO Port
+ * @retval Input data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->IDR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll IDR IDy LL_GPIO_IsInputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Write output data register for the port.
+ * @rmtoll ODR ODy LL_GPIO_WriteOutputPort
+ * @param GPIOx GPIO Port
+ * @param PortValue Level value for each pin of the port
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
+{
+ WRITE_REG(GPIOx->ODR, PortValue);
+}
+
+/**
+ * @brief Return full output data register value for a dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_ReadOutputPort
+ * @param GPIOx GPIO Port
+ * @retval Output data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->ODR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Set several pins to high level on dedicated gpio port.
+ * @rmtoll BSRR BSy LL_GPIO_SetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BSRR, PinMask);
+}
+
+/**
+ * @brief Set several pins to low level on dedicated gpio port.
+ * @rmtoll BRR BRy LL_GPIO_ResetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BRR, PinMask);
+}
+
+/**
+ * @brief Toggle data value for several pin of dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_TogglePin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_pwr.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_pwr.h
new file mode 100644
index 00000000..6e2a0fbc
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_pwr.h
@@ -0,0 +1,570 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_PWR_H
+#define __STM32F3xx_LL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_WriteReg function
+ * @{
+ */
+#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */
+#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_ReadReg function
+ * @{
+ */
+#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */
+#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */
+#if defined(PWR_PVD_SUPPORT)
+#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */
+#endif /* PWR_PVD_SUPPORT */
+#if defined(PWR_CSR_VREFINTRDYF)
+#define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */
+#endif /* PWR_CSR_VREFINTRDYF */
+#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */
+#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */
+#if defined(PWR_CSR_EWUP3)
+#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */
+#endif /* PWR_CSR_EWUP3 */
+/**
+ * @}
+ */
+
+
+/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
+ * @{
+ */
+#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
+/**
+ * @}
+ */
+
+#if defined(PWR_CR_LPDS)
+/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
+ * @{
+ */
+#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */
+#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */
+/**
+ * @}
+ */
+#endif /* PWR_CR_LPDS */
+
+#if defined(PWR_PVD_SUPPORT)
+/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
+ * @{
+ */
+#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 2.2 V */
+#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.3 V */
+#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.4 V */
+#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */
+#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.6 V */
+#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.7 V */
+#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 2.8 V */
+#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold detected by PVD 2.9 V */
+/**
+ * @}
+ */
+#endif /* PWR_PVD_SUPPORT */
+/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
+ * @{
+ */
+#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */
+#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */
+#if defined(PWR_CSR_EWUP3)
+#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */
+#endif /* PWR_CSR_EWUP3 */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_SDADC_ANALOG_X SDADC Analogx
+ * @{
+ */
+#if defined(SDADC1)
+#define LL_PWR_SDADC_ANALOG1 (PWR_CR_ENSD1) /*!< Enable SDADC1 */
+#endif /* SDADC1 */
+#if defined(SDADC2)
+#define LL_PWR_SDADC_ANALOG2 (PWR_CR_ENSD2) /*!< Enable SDADC2 */
+#endif /* SDADC2 */
+#if defined(SDADC3)
+#define LL_PWR_SDADC_ANALOG3 (PWR_CR_ENSD3) /*!< Enable SDADC3 */
+#endif /* SDADC3 */
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
+ * @{
+ */
+
+/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in PWR register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in PWR register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_LL_EF_Configuration Configuration
+ * @{
+ */
+/**
+ * @brief Enables the SDADC peripheral functionality
+ * @rmtoll CR ENSD1 LL_PWR_EnableSDADC\n
+ * CR ENSD2 LL_PWR_EnableSDADC\n
+ * CR ENSD3 LL_PWR_EnableSDADC
+ * @param Analogx This parameter can be a combination of the following values:
+ * @arg @ref LL_PWR_SDADC_ANALOG1
+ * @arg @ref LL_PWR_SDADC_ANALOG2
+ * @arg @ref LL_PWR_SDADC_ANALOG3
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableSDADC(uint32_t Analogx)
+{
+ SET_BIT(PWR->CR, Analogx);
+}
+
+/**
+ * @brief Disables the SDADC peripheral functionality
+ * @rmtoll CR ENSD1 LL_PWR_EnableSDADC\n
+ * CR ENSD2 LL_PWR_EnableSDADC\n
+ * CR ENSD3 LL_PWR_EnableSDADC
+ * @param Analogx This parameter can be a combination of the following values:
+ * @arg @ref LL_PWR_SDADC_ANALOG1
+ * @arg @ref LL_PWR_SDADC_ANALOG2
+ * @arg @ref LL_PWR_SDADC_ANALOG3
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableSDADC(uint32_t Analogx)
+{
+ CLEAR_BIT(PWR->CR, Analogx);
+}
+
+/**
+ * @brief Check if SDADCx has been enabled or not
+ * @rmtoll CR ENSD1 LL_PWR_IsEnabledSDADC\n
+ * CR ENSD2 LL_PWR_IsEnabledSDADC\n
+ * CR ENSD3 LL_PWR_IsEnabledSDADC
+ * @param Analogx This parameter can be a combination of the following values:
+ * @arg @ref LL_PWR_SDADC_ANALOG1
+ * @arg @ref LL_PWR_SDADC_ANALOG2
+ * @arg @ref LL_PWR_SDADC_ANALOG3
+ * @retval None
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledSDADC(uint32_t Analogx)
+{
+ return (READ_BIT(PWR->CR, Analogx) == (Analogx));
+}
+
+/**
+ * @brief Enable access to the backup domain
+ * @rmtoll CR DBP LL_PWR_EnableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @brief Disable access to the backup domain
+ * @rmtoll CR DBP LL_PWR_DisableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @brief Check if the backup domain is enabled
+ * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
+{
+ return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
+}
+
+#if defined(PWR_CR_LPDS)
+/**
+ * @brief Set voltage Regulator mode during deep sleep mode
+ * @rmtoll CR LPDS LL_PWR_SetRegulModeDS
+ * @param RegulMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_REGU_DSMODE_MAIN
+ * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
+{
+ MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
+}
+
+/**
+ * @brief Get voltage Regulator mode during deep sleep mode
+ * @rmtoll CR LPDS LL_PWR_GetRegulModeDS
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_REGU_DSMODE_MAIN
+ * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
+}
+#endif /* PWR_CR_LPDS */
+
+/**
+ * @brief Set Power Down mode when CPU enters deepsleep
+ * @rmtoll CR PDDS LL_PWR_SetPowerMode\n
+ * @rmtoll CR LPDS LL_PWR_SetPowerMode
+ * @param PDMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU
+ * @arg @ref LL_PWR_MODE_STANDBY
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
+{
+ MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
+}
+
+/**
+ * @brief Get Power Down mode when CPU enters deepsleep
+ * @rmtoll CR PDDS LL_PWR_GetPowerMode\n
+ * @rmtoll CR LPDS LL_PWR_GetPowerMode
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU
+ * @arg @ref LL_PWR_MODE_STANDBY
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
+}
+
+#if defined(PWR_PVD_SUPPORT)
+/**
+ * @brief Configure the voltage threshold detected by the Power Voltage Detector
+ * @rmtoll CR PLS LL_PWR_SetPVDLevel
+ * @param PVDLevel This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
+{
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
+}
+
+/**
+ * @brief Get the voltage threshold detection
+ * @rmtoll CR PLS LL_PWR_GetPVDLevel
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
+}
+
+/**
+ * @brief Enable Power Voltage Detector
+ * @rmtoll CR PVDE LL_PWR_EnablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnablePVD(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief Disable Power Voltage Detector
+ * @rmtoll CR PVDE LL_PWR_DisablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisablePVD(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief Check if Power Voltage Detector is enabled
+ * @rmtoll CR PVDE LL_PWR_IsEnabledPVD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
+{
+ return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
+}
+#endif /* PWR_PVD_SUPPORT */
+
+/**
+ * @brief Enable the WakeUp PINx functionality
+ * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+ *
+ * (*) not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
+{
+ SET_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+ * @brief Disable the WakeUp PINx functionality
+ * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+ *
+ * (*) not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
+{
+ CLEAR_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+ * @brief Check if the WakeUp PINx functionality is enabled
+ * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+ *
+ * (*) not available on all devices
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
+{
+ return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Wake-up Flag
+ * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
+}
+
+/**
+ * @brief Get Standby Flag
+ * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
+}
+
+#if defined(PWR_PVD_SUPPORT)
+/**
+ * @brief Indicate whether VDD voltage is below the selected PVD threshold
+ * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
+}
+#endif /* PWR_PVD_SUPPORT */
+
+#if defined(PWR_CSR_VREFINTRDYF)
+/**
+ * @brief Get Internal Reference VrefInt Flag
+ * @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF));
+}
+#endif /* PWR_CSR_VREFINTRDYF */
+/**
+ * @brief Clear Standby Flag
+ * @rmtoll CR CSBF LL_PWR_ClearFlag_SB
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_CSBF);
+}
+
+/**
+ * @brief Clear Wake-up Flags
+ * @rmtoll CR CWUF LL_PWR_ClearFlag_WU
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_CWUF);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup PWR_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_PWR_DeInit(void);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(PWR) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_rcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_rcc.h
new file mode 100644
index 00000000..b3e7b66f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_rcc.h
@@ -0,0 +1,2834 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_RCC_H
+#define __STM32F3xx_LL_RCC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup RCC_LL RCC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_LL_Private_Constants RCC Private Constants
+ * @{
+ */
+/* Defines used for the bit position in the register and perform offsets*/
+#define RCC_POSITION_HPRE (uint32_t)POSITION_VAL(RCC_CFGR_HPRE) /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_PPRE1 (uint32_t)POSITION_VAL(RCC_CFGR_PPRE1) /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_PPRE2 (uint32_t)POSITION_VAL(RCC_CFGR_PPRE2) /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_HSICAL (uint32_t)POSITION_VAL(RCC_CR_HSICAL) /*!< field position in register RCC_CR */
+#define RCC_POSITION_HSITRIM (uint32_t)POSITION_VAL(RCC_CR_HSITRIM) /*!< field position in register RCC_CR */
+#define RCC_POSITION_PLLMUL (uint32_t)POSITION_VAL(RCC_CFGR_PLLMUL) /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_USART1SW (uint32_t)0U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_USART2SW (uint32_t)16U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_USART3SW (uint32_t)18U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM1SW (uint32_t)8U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM8SW (uint32_t)9U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM15SW (uint32_t)10U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM16SW (uint32_t)11U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM17SW (uint32_t)13U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM20SW (uint32_t)15U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM2SW (uint32_t)24U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_TIM34SW (uint32_t)25U /*!< field position in register RCC_CFGR3 */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Private_Macros RCC Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
+ * @{
+ */
+
+/**
+ * @brief RCC Clocks Frequency Structure
+ */
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */
+ uint32_t HCLK_Frequency; /*!< HCLK clock frequency */
+ uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */
+ uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */
+} LL_RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
+ * @brief Defines used to adapt values of different oscillators
+ * @note These values could be modified in the user environment according to
+ * HW set-up.
+ * @{
+ */
+#if !defined (HSE_VALUE)
+#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+#define HSI_VALUE 8000000U /*!< Value of the HSI oscillator in Hz */
+#endif /* HSI_VALUE */
+
+#if !defined (LSE_VALUE)
+#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSI_VALUE)
+#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */
+#endif /* LSI_VALUE */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_WriteReg function
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */
+#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */
+#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */
+#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */
+#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */
+#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_ReadReg function
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */
+#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */
+#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */
+#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */
+#define LL_RCC_CFGR_MCOF RCC_CFGR_MCOF /*!< MCO flag */
+#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */
+#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */
+#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */
+#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */
+#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */
+#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */
+#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
+#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
+#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */
+#if defined(RCC_CSR_V18PWRRSTF)
+#define LL_RCC_CSR_V18PWRRSTF RCC_CSR_V18PWRRSTF /*!< Reset flag of the 1.8 V domain. */
+#endif /* RCC_CSR_V18PWRRSTF */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */
+#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */
+#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */
+#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */
+#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability
+ * @{
+ */
+#define LL_RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U) /*!< Xtal mode lower driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler
+ * @{
+ */
+#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1)
+ * @{
+ */
+#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2)
+ * @{
+ */
+#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection
+ * @{
+ */
+#define LL_RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCOSEL_NOCLOCK /*!< MCO output disabled, no clock on MCO */
+#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_SYSCLK /*!< SYSCLK selection as MCO source */
+#define LL_RCC_MCO1SOURCE_HSI RCC_CFGR_MCOSEL_HSI /*!< HSI selection as MCO source */
+#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_HSE /*!< HSE selection as MCO source */
+#define LL_RCC_MCO1SOURCE_LSI RCC_CFGR_MCOSEL_LSI /*!< LSI selection as MCO source */
+#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_LSE /*!< LSE selection as MCO source */
+#define LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 RCC_CFGR_MCOSEL_PLL_DIV2 /*!< PLL clock divided by 2*/
+#if defined(RCC_CFGR_PLLNODIV)
+#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_PLL_DIV2 | RCC_CFGR_PLLNODIV) /*!< PLL clock selected*/
+#endif /* RCC_CFGR_PLLNODIV */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler
+ * @{
+ */
+#define LL_RCC_MCO1_DIV_1 ((uint32_t)0x00000000U)/*!< MCO Clock divided by 1 */
+#if defined(RCC_CFGR_MCOPRE)
+#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO Clock divided by 2 */
+#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO Clock divided by 4 */
+#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO Clock divided by 8 */
+#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO Clock divided by 16 */
+#define LL_RCC_MCO1_DIV_32 RCC_CFGR_MCOPRE_DIV32 /*!< MCO Clock divided by 32 */
+#define LL_RCC_MCO1_DIV_64 RCC_CFGR_MCOPRE_DIV64 /*!< MCO Clock divided by 64 */
+#define LL_RCC_MCO1_DIV_128 RCC_CFGR_MCOPRE_DIV128 /*!< MCO Clock divided by 128 */
+#endif /* RCC_CFGR_MCOPRE */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
+ * @{
+ */
+#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */
+#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection
+ * @{
+ */
+#if defined(RCC_CFGR3_USART1SW_PCLK1)
+#define LL_RCC_USART1_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART1SW << 24U) | RCC_CFGR3_USART1SW_PCLK1) /*!< PCLK1 clock used as USART1 clock source */
+#else
+#define LL_RCC_USART1_CLKSOURCE_PCLK2 (uint32_t)((RCC_POSITION_USART1SW << 24U) | RCC_CFGR3_USART1SW_PCLK2) /*!< PCLK2 clock used as USART1 clock source */
+#endif /*RCC_CFGR3_USART1SW_PCLK1*/
+#define LL_RCC_USART1_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART1SW << 24U) | RCC_CFGR3_USART1SW_SYSCLK) /*!< System clock selected as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART1SW << 24U) | RCC_CFGR3_USART1SW_LSE) /*!< LSE oscillator clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART1SW << 24U) | RCC_CFGR3_USART1SW_HSI) /*!< HSI oscillator clock used as USART1 clock source */
+#if defined(RCC_CFGR3_USART2SW)
+#define LL_RCC_USART2_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART2SW << 24U) | RCC_CFGR3_USART2SW_PCLK) /*!< PCLK1 clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART2SW << 24U) | RCC_CFGR3_USART2SW_SYSCLK) /*!< System clock selected as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART2SW << 24U) | RCC_CFGR3_USART2SW_LSE) /*!< LSE oscillator clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART2SW << 24U) | RCC_CFGR3_USART2SW_HSI) /*!< HSI oscillator clock used as USART2 clock source */
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+#define LL_RCC_USART3_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART3SW << 24U) | RCC_CFGR3_USART3SW_PCLK) /*!< PCLK1 clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART3SW << 24U) | RCC_CFGR3_USART3SW_SYSCLK) /*!< System clock selected as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART3SW << 24U) | RCC_CFGR3_USART3SW_LSE) /*!< LSE oscillator clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART3SW << 24U) | RCC_CFGR3_USART3SW_HSI) /*!< HSI oscillator clock used as USART3 clock source */
+#endif /* RCC_CFGR3_USART3SW */
+/**
+ * @}
+ */
+
+#if defined(RCC_CFGR3_UART4SW) || defined(RCC_CFGR3_UART5SW)
+/** @defgroup RCC_LL_EC_UART4_CLKSOURCE Peripheral UART clock source selection
+ * @{
+ */
+#define LL_RCC_UART4_CLKSOURCE_PCLK1 (uint32_t)((RCC_CFGR3_UART4SW >> 8U) | RCC_CFGR3_UART4SW_PCLK) /*!< PCLK1 clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_SYSCLK (uint32_t)((RCC_CFGR3_UART4SW >> 8U) | RCC_CFGR3_UART4SW_SYSCLK) /*!< System clock selected as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_LSE (uint32_t)((RCC_CFGR3_UART4SW >> 8U) | RCC_CFGR3_UART4SW_LSE) /*!< LSE oscillator clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_HSI (uint32_t)((RCC_CFGR3_UART4SW >> 8U) | RCC_CFGR3_UART4SW_HSI) /*!< HSI oscillator clock used as UART4 clock source */
+#define LL_RCC_UART5_CLKSOURCE_PCLK1 (uint32_t)((RCC_CFGR3_UART5SW >> 8U) | RCC_CFGR3_UART5SW_PCLK) /*!< PCLK1 clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_SYSCLK (uint32_t)((RCC_CFGR3_UART5SW >> 8U) | RCC_CFGR3_UART5SW_SYSCLK) /*!< System clock selected as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_LSE (uint32_t)((RCC_CFGR3_UART5SW >> 8U) | RCC_CFGR3_UART5SW_LSE) /*!< LSE oscillator clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_HSI (uint32_t)((RCC_CFGR3_UART5SW >> 8U) | RCC_CFGR3_UART5SW_HSI) /*!< HSI oscillator clock used as UART5 clock source */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR3_UART4SW || RCC_CFGR3_UART5SW */
+
+/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE_HSI (uint32_t)((RCC_CFGR3_I2C1SW << 24U) | RCC_CFGR3_I2C1SW_HSI) /*!< HSI oscillator clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_SYSCLK (uint32_t)((RCC_CFGR3_I2C1SW << 24U) | RCC_CFGR3_I2C1SW_SYSCLK) /*!< System clock selected as I2C1 clock source */
+#if defined(RCC_CFGR3_I2C2SW)
+#define LL_RCC_I2C2_CLKSOURCE_HSI (uint32_t)((RCC_CFGR3_I2C2SW << 24U) | RCC_CFGR3_I2C2SW_HSI) /*!< HSI oscillator clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_SYSCLK (uint32_t)((RCC_CFGR3_I2C2SW << 24U) | RCC_CFGR3_I2C2SW_SYSCLK) /*!< System clock selected as I2C2 clock source */
+#endif /*RCC_CFGR3_I2C2SW*/
+#if defined(RCC_CFGR3_I2C3SW)
+#define LL_RCC_I2C3_CLKSOURCE_HSI (uint32_t)((RCC_CFGR3_I2C3SW << 24U) | RCC_CFGR3_I2C3SW_HSI) /*!< HSI oscillator clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_SYSCLK (uint32_t)((RCC_CFGR3_I2C3SW << 24U) | RCC_CFGR3_I2C3SW_SYSCLK) /*!< System clock selected as I2C3 clock source */
+#endif /*RCC_CFGR3_I2C3SW*/
+/**
+ * @}
+ */
+
+#if defined(RCC_CFGR_I2SSRC)
+/** @defgroup RCC_LL_EC_I2S_CLKSOURCE Peripheral I2S clock source selection
+ * @{
+ */
+#define LL_RCC_I2S_CLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK /*!< System clock selected as I2S clock source */
+#define LL_RCC_I2S_CLKSOURCE_PIN RCC_CFGR_I2SSRC_EXT /*!< External clock selected as I2S clock source */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR_I2SSRC */
+
+#if defined(RCC_CFGR3_TIMSW)
+/** @defgroup RCC_LL_EC_TIM1_CLKSOURCE Peripheral TIM clock source selection
+ * @{
+ */
+#define LL_RCC_TIM1_CLKSOURCE_PCLK2 (uint32_t)(((RCC_POSITION_TIM1SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM1SW_PCLK2) /*!< PCLK2 used as TIM1 clock source */
+#define LL_RCC_TIM1_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM1SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM1SW_PLL) /*!< PLL clock used as TIM1 clock source */
+#if defined(RCC_CFGR3_TIM8SW)
+#define LL_RCC_TIM8_CLKSOURCE_PCLK2 (uint32_t)(((RCC_POSITION_TIM8SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM8SW_PCLK2) /*!< PCLK2 used as TIM8 clock source */
+#define LL_RCC_TIM8_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM8SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM8SW_PLL) /*!< PLL clock used as TIM8 clock source */
+#endif /*RCC_CFGR3_TIM8SW*/
+#if defined(RCC_CFGR3_TIM15SW)
+#define LL_RCC_TIM15_CLKSOURCE_PCLK2 (uint32_t)(((RCC_POSITION_TIM15SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM15SW_PCLK2) /*!< PCLK2 used as TIM15 clock source */
+#define LL_RCC_TIM15_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM15SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM15SW_PLL) /*!< PLL clock used as TIM15 clock source */
+#endif /*RCC_CFGR3_TIM15SW*/
+#if defined(RCC_CFGR3_TIM16SW)
+#define LL_RCC_TIM16_CLKSOURCE_PCLK2 (uint32_t)(((RCC_POSITION_TIM16SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM16SW_PCLK2) /*!< PCLK2 used as TIM16 clock source */
+#define LL_RCC_TIM16_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM16SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM16SW_PLL) /*!< PLL clock used as TIM16 clock source */
+#endif /*RCC_CFGR3_TIM16SW*/
+#if defined(RCC_CFGR3_TIM17SW)
+#define LL_RCC_TIM17_CLKSOURCE_PCLK2 (uint32_t)(((RCC_POSITION_TIM17SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM17SW_PCLK2) /*!< PCLK2 used as TIM17 clock source */
+#define LL_RCC_TIM17_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM17SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM17SW_PLL) /*!< PLL clock used as TIM17 clock source */
+#endif /*RCC_CFGR3_TIM17SW*/
+#if defined(RCC_CFGR3_TIM20SW)
+#define LL_RCC_TIM20_CLKSOURCE_PCLK2 (uint32_t)(((RCC_POSITION_TIM20SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM20SW_PCLK2) /*!< PCLK2 used as TIM20 clock source */
+#define LL_RCC_TIM20_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM20SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM20SW_PLL) /*!< PLL clock used as TIM20 clock source */
+#endif /*RCC_CFGR3_TIM20SW*/
+#if defined(RCC_CFGR3_TIM2SW)
+#define LL_RCC_TIM2_CLKSOURCE_PCLK1 (uint32_t)(((RCC_POSITION_TIM2SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM2SW_PCLK1) /*!< PCLK1 used as TIM2 clock source */
+#define LL_RCC_TIM2_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM2SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM2SW_PLL) /*!< PLL clock used as TIM2 clock source */
+#endif /*RCC_CFGR3_TIM2SW*/
+#if defined(RCC_CFGR3_TIM34SW)
+#define LL_RCC_TIM34_CLKSOURCE_PCLK1 (uint32_t)(((RCC_POSITION_TIM34SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM34SW_PCLK1) /*!< PCLK1 used as TIM3/4 clock source */
+#define LL_RCC_TIM34_CLKSOURCE_PLL (uint32_t)(((RCC_POSITION_TIM34SW - RCC_POSITION_TIM1SW) << 27U) | RCC_CFGR3_TIM34SW_PLL) /*!< PLL clock used as TIM3/4 clock source */
+#endif /*RCC_CFGR3_TIM34SW*/
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR3_TIMSW */
+
+#if defined(HRTIM1)
+/** @defgroup RCC_LL_EC_HRTIM1_CLKSOURCE Peripheral HRTIM1 clock source selection
+ * @{
+ */
+#define LL_RCC_HRTIM1_CLKSOURCE_PCLK2 RCC_CFGR3_HRTIM1SW_PCLK2 /*!< PCLK2 used as HRTIM1 clock source */
+#define LL_RCC_HRTIM1_CLKSOURCE_PLL RCC_CFGR3_HRTIM1SW_PLL /*!< PLL clock used as HRTIM1 clock source */
+/**
+ * @}
+ */
+
+#endif /* HRTIM1 */
+
+#if defined(CEC)
+/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection
+ * @{
+ */
+#define LL_RCC_CEC_CLKSOURCE_HSI_DIV244 RCC_CFGR3_CECSW_HSI_DIV244 /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CFGR3_CECSW_LSE /*!< LSE clock selected as HDMI CEC entry clock source */
+/**
+ * @}
+ */
+
+#endif /* CEC */
+
+#if defined(USB)
+/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection
+ * @{
+ */
+#define LL_RCC_USB_CLKSOURCE_PLL RCC_CFGR_USBPRE_DIV1 /*!< USB prescaler is PLL clock divided by 1 */
+#define LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5 RCC_CFGR_USBPRE_DIV1_5 /*!< USB prescaler is PLL clock divided by 1.5 */
+/**
+ * @}
+ */
+
+#endif /* USB */
+
+#if defined(RCC_CFGR_ADCPRE)
+/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection
+ * @{
+ */
+#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_2 RCC_CFGR_ADCPRE_DIV2 /*!< ADC prescaler PCLK divided by 2 */
+#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_4 RCC_CFGR_ADCPRE_DIV4 /*!< ADC prescaler PCLK divided by 4 */
+#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_6 RCC_CFGR_ADCPRE_DIV6 /*!< ADC prescaler PCLK divided by 6 */
+#define LL_RCC_ADC_CLKSRC_PCLK2_DIV_8 RCC_CFGR_ADCPRE_DIV8 /*!< ADC prescaler PCLK divided by 8 */
+/**
+ * @}
+ */
+
+#elif defined(RCC_CFGR2_ADC1PRES)
+/** @defgroup RCC_LL_EC_ADC1_CLKSOURCE Peripheral ADC clock source selection
+ * @{
+ */
+#define LL_RCC_ADC1_CLKSRC_HCLK RCC_CFGR2_ADC1PRES_NO /*!< ADC1 clock disabled, ADC1 can use AHB clock */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_1 RCC_CFGR2_ADC1PRES_DIV1 /*!< ADC1 PLL clock divided by 1 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_2 RCC_CFGR2_ADC1PRES_DIV2 /*!< ADC1 PLL clock divided by 2 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_4 RCC_CFGR2_ADC1PRES_DIV4 /*!< ADC1 PLL clock divided by 4 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_6 RCC_CFGR2_ADC1PRES_DIV6 /*!< ADC1 PLL clock divided by 6 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_8 RCC_CFGR2_ADC1PRES_DIV8 /*!< ADC1 PLL clock divided by 8 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_10 RCC_CFGR2_ADC1PRES_DIV10 /*!< ADC1 PLL clock divided by 10 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_12 RCC_CFGR2_ADC1PRES_DIV12 /*!< ADC1 PLL clock divided by 12 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_16 RCC_CFGR2_ADC1PRES_DIV16 /*!< ADC1 PLL clock divided by 16 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_32 RCC_CFGR2_ADC1PRES_DIV32 /*!< ADC1 PLL clock divided by 32 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_64 RCC_CFGR2_ADC1PRES_DIV64 /*!< ADC1 PLL clock divided by 64 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_128 RCC_CFGR2_ADC1PRES_DIV128 /*!< ADC1 PLL clock divided by 128 */
+#define LL_RCC_ADC1_CLKSRC_PLL_DIV_256 RCC_CFGR2_ADC1PRES_DIV256 /*!< ADC1 PLL clock divided by 256 */
+/**
+ * @}
+ */
+
+#elif defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+#if defined(RCC_CFGR2_ADCPRE12) && defined(RCC_CFGR2_ADCPRE34)
+/** @defgroup RCC_LL_EC_ADC12_CLKSOURCE Peripheral ADC12 clock source selection
+ * @{
+ */
+#define LL_RCC_ADC12_CLKSRC_HCLK (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_NO) /*!< ADC12 clock disabled, ADC12 can use AHB clock */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_1 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV1) /*!< ADC12 PLL clock divided by 1 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_2 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV2) /*!< ADC12 PLL clock divided by 2 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_4 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV4) /*!< ADC12 PLL clock divided by 4 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_6 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV6) /*!< ADC12 PLL clock divided by 6 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_8 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV8) /*!< ADC12 PLL clock divided by 8 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_10 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV10) /*!< ADC12 PLL clock divided by 10 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_12 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV12) /*!< ADC12 PLL clock divided by 12 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_16 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV16) /*!< ADC12 PLL clock divided by 16 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_32 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV32) /*!< ADC12 PLL clock divided by 32 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_64 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV64) /*!< ADC12 PLL clock divided by 64 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_128 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV128) /*!< ADC12 PLL clock divided by 128 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_256 (uint32_t)((RCC_CFGR2_ADCPRE12 << 16U) | RCC_CFGR2_ADCPRE12_DIV256) /*!< ADC12 PLL clock divided by 256 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_ADC34_CLKSOURCE Peripheral ADC34 clock source selection
+ * @{
+ */
+#define LL_RCC_ADC34_CLKSRC_HCLK (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_NO) /*!< ADC34 clock disabled, ADC34 can use AHB clock */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_1 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV1) /*!< ADC34 PLL clock divided by 1 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_2 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV2) /*!< ADC34 PLL clock divided by 2 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_4 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV4) /*!< ADC34 PLL clock divided by 4 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_6 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV6) /*!< ADC34 PLL clock divided by 6 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_8 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV8) /*!< ADC34 PLL clock divided by 8 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_10 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV10) /*!< ADC34 PLL clock divided by 10 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_12 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV12) /*!< ADC34 PLL clock divided by 12 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_16 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV16) /*!< ADC34 PLL clock divided by 16 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_32 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV32) /*!< ADC34 PLL clock divided by 32 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_64 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV64) /*!< ADC34 PLL clock divided by 64 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_128 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV128) /*!< ADC34 PLL clock divided by 128 */
+#define LL_RCC_ADC34_CLKSRC_PLL_DIV_256 (uint32_t)((RCC_CFGR2_ADCPRE34 << 16U) | RCC_CFGR2_ADCPRE34_DIV256) /*!< ADC34 PLL clock divided by 256 */
+/**
+ * @}
+ */
+
+#else
+/** @defgroup RCC_LL_EC_ADC12_CLKSOURCE Peripheral ADC clock source selection
+ * @{
+ */
+#define LL_RCC_ADC12_CLKSRC_HCLK RCC_CFGR2_ADCPRE12_NO /*!< ADC12 clock disabled, ADC12 can use AHB clock */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_1 RCC_CFGR2_ADCPRE12_DIV1 /*!< ADC12 PLL clock divided by 1 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_2 RCC_CFGR2_ADCPRE12_DIV2 /*!< ADC12 PLL clock divided by 2 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_4 RCC_CFGR2_ADCPRE12_DIV4 /*!< ADC12 PLL clock divided by 4 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_6 RCC_CFGR2_ADCPRE12_DIV6 /*!< ADC12 PLL clock divided by 6 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_8 RCC_CFGR2_ADCPRE12_DIV8 /*!< ADC12 PLL clock divided by 8 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_10 RCC_CFGR2_ADCPRE12_DIV10 /*!< ADC12 PLL clock divided by 10 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_12 RCC_CFGR2_ADCPRE12_DIV12 /*!< ADC12 PLL clock divided by 12 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_16 RCC_CFGR2_ADCPRE12_DIV16 /*!< ADC12 PLL clock divided by 16 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_32 RCC_CFGR2_ADCPRE12_DIV32 /*!< ADC12 PLL clock divided by 32 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_64 RCC_CFGR2_ADCPRE12_DIV64 /*!< ADC12 PLL clock divided by 64 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_128 RCC_CFGR2_ADCPRE12_DIV128 /*!< ADC12 PLL clock divided by 128 */
+#define LL_RCC_ADC12_CLKSRC_PLL_DIV_256 RCC_CFGR2_ADCPRE12_DIV256 /*!< ADC12 PLL clock divided by 256 */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR2_ADCPRE12 && RCC_CFGR2_ADCPRE34 */
+
+#endif /* RCC_CFGR_ADCPRE */
+
+#if defined(RCC_CFGR_SDPRE)
+/** @defgroup RCC_LL_EC_SDADC_CLKSOURCE_SYSCLK Peripheral SDADC clock source selection
+ * @{
+ */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_1 RCC_CFGR_SDPRE_DIV1 /*!< SDADC CLK not divided */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_2 RCC_CFGR_SDPRE_DIV2 /*!< SDADC CLK divided by 2 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_4 RCC_CFGR_SDPRE_DIV4 /*!< SDADC CLK divided by 4 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_6 RCC_CFGR_SDPRE_DIV6 /*!< SDADC CLK divided by 6 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_8 RCC_CFGR_SDPRE_DIV8 /*!< SDADC CLK divided by 8 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_10 RCC_CFGR_SDPRE_DIV10 /*!< SDADC CLK divided by 10 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_12 RCC_CFGR_SDPRE_DIV12 /*!< SDADC CLK divided by 12 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_14 RCC_CFGR_SDPRE_DIV14 /*!< SDADC CLK divided by 14 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_16 RCC_CFGR_SDPRE_DIV16 /*!< SDADC CLK divided by 16 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_20 RCC_CFGR_SDPRE_DIV20 /*!< SDADC CLK divided by 20 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_24 RCC_CFGR_SDPRE_DIV24 /*!< SDADC CLK divided by 24 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_28 RCC_CFGR_SDPRE_DIV28 /*!< SDADC CLK divided by 28 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_32 RCC_CFGR_SDPRE_DIV32 /*!< SDADC CLK divided by 32 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_36 RCC_CFGR_SDPRE_DIV36 /*!< SDADC CLK divided by 36 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_40 RCC_CFGR_SDPRE_DIV40 /*!< SDADC CLK divided by 40 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_44 RCC_CFGR_SDPRE_DIV44 /*!< SDADC CLK divided by 44 */
+#define LL_RCC_SDADC_CLKSRC_SYS_DIV_48 RCC_CFGR_SDPRE_DIV48 /*!< SDADC CLK divided by 48 */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR_SDPRE */
+
+/** @defgroup RCC_LL_EC_USART Peripheral USART get clock source
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE RCC_POSITION_USART1SW /*!< USART1 Clock source selection */
+#if defined(RCC_CFGR3_USART2SW)
+#define LL_RCC_USART2_CLKSOURCE RCC_POSITION_USART2SW /*!< USART2 Clock source selection */
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+#define LL_RCC_USART3_CLKSOURCE RCC_POSITION_USART3SW /*!< USART3 Clock source selection */
+#endif /* RCC_CFGR3_USART3SW */
+/**
+ * @}
+ */
+
+#if defined(RCC_CFGR3_UART4SW) || defined(RCC_CFGR3_UART5SW)
+/** @defgroup RCC_LL_EC_UART Peripheral UART get clock source
+ * @{
+ */
+#define LL_RCC_UART4_CLKSOURCE RCC_CFGR3_UART4SW /*!< UART4 Clock source selection */
+#define LL_RCC_UART5_CLKSOURCE RCC_CFGR3_UART5SW /*!< UART5 Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR3_UART4SW || RCC_CFGR3_UART5SW */
+
+/** @defgroup RCC_LL_EC_I2C Peripheral I2C get clock source
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE RCC_CFGR3_I2C1SW /*!< I2C1 Clock source selection */
+#if defined(RCC_CFGR3_I2C2SW)
+#define LL_RCC_I2C2_CLKSOURCE RCC_CFGR3_I2C2SW /*!< I2C2 Clock source selection */
+#endif /*RCC_CFGR3_I2C2SW*/
+#if defined(RCC_CFGR3_I2C3SW)
+#define LL_RCC_I2C3_CLKSOURCE RCC_CFGR3_I2C3SW /*!< I2C3 Clock source selection */
+#endif /*RCC_CFGR3_I2C3SW*/
+/**
+ * @}
+ */
+
+#if defined(RCC_CFGR_I2SSRC)
+/** @defgroup RCC_LL_EC_I2S Peripheral I2S get clock source
+ * @{
+ */
+#define LL_RCC_I2S_CLKSOURCE RCC_CFGR_I2SSRC /*!< I2S Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR_I2SSRC */
+
+#if defined(RCC_CFGR3_TIMSW)
+/** @defgroup RCC_LL_EC_TIM TIMx Peripheral TIM get clock source
+ * @{
+ */
+#define LL_RCC_TIM1_CLKSOURCE (RCC_POSITION_TIM1SW - RCC_POSITION_TIM1SW) /*!< TIM1 Clock source selection */
+#if defined(RCC_CFGR3_TIM2SW)
+#define LL_RCC_TIM2_CLKSOURCE (RCC_POSITION_TIM2SW - RCC_POSITION_TIM1SW) /*!< TIM2 Clock source selection */
+#endif /*RCC_CFGR3_TIM2SW*/
+#if defined(RCC_CFGR3_TIM8SW)
+#define LL_RCC_TIM8_CLKSOURCE (RCC_POSITION_TIM8SW - RCC_POSITION_TIM1SW) /*!< TIM8 Clock source selection */
+#endif /*RCC_CFGR3_TIM8SW*/
+#if defined(RCC_CFGR3_TIM15SW)
+#define LL_RCC_TIM15_CLKSOURCE (RCC_POSITION_TIM15SW - RCC_POSITION_TIM1SW) /*!< TIM15 Clock source selection */
+#endif /*RCC_CFGR3_TIM15SW*/
+#if defined(RCC_CFGR3_TIM16SW)
+#define LL_RCC_TIM16_CLKSOURCE (RCC_POSITION_TIM16SW - RCC_POSITION_TIM1SW) /*!< TIM16 Clock source selection */
+#endif /*RCC_CFGR3_TIM16SW*/
+#if defined(RCC_CFGR3_TIM17SW)
+#define LL_RCC_TIM17_CLKSOURCE (RCC_POSITION_TIM17SW - RCC_POSITION_TIM1SW) /*!< TIM17 Clock source selection */
+#endif /*RCC_CFGR3_TIM17SW*/
+#if defined(RCC_CFGR3_TIM20SW)
+#define LL_RCC_TIM20_CLKSOURCE (RCC_POSITION_TIM20SW - RCC_POSITION_TIM1SW) /*!< TIM20 Clock source selection */
+#endif /*RCC_CFGR3_TIM20SW*/
+#if defined(RCC_CFGR3_TIM34SW)
+#define LL_RCC_TIM34_CLKSOURCE (RCC_POSITION_TIM34SW - RCC_POSITION_TIM1SW) /*!< TIM3/4 Clock source selection */
+#endif /*RCC_CFGR3_TIM34SW*/
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR3_TIMSW */
+
+#if defined(HRTIM1)
+/** @defgroup RCC_LL_EC_HRTIM1 Peripheral HRTIM1 get clock source
+ * @{
+ */
+#define LL_RCC_HRTIM1_CLKSOURCE RCC_CFGR3_HRTIM1SW /*!< HRTIM1 Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* HRTIM1 */
+
+#if defined(CEC)
+/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source
+ * @{
+ */
+#define LL_RCC_CEC_CLKSOURCE RCC_CFGR3_CECSW /*!< CEC Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* CEC */
+
+#if defined(USB)
+/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source
+ * @{
+ */
+#define LL_RCC_USB_CLKSOURCE RCC_CFGR_USBPRE /*!< USB Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* USB */
+
+#if defined(RCC_CFGR_ADCPRE)
+/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source
+ * @{
+ */
+#define LL_RCC_ADC_CLKSOURCE RCC_CFGR_ADCPRE /*!< ADC Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR_ADCPRE */
+
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+/** @defgroup RCC_LL_EC_ADCXX Peripheral ADC get clock source
+ * @{
+ */
+#if defined(RCC_CFGR2_ADC1PRES)
+#define LL_RCC_ADC1_CLKSOURCE RCC_CFGR2_ADC1PRES /*!< ADC1 Clock source selection */
+#else
+#define LL_RCC_ADC12_CLKSOURCE RCC_CFGR2_ADCPRE12 /*!< ADC12 Clock source selection */
+#if defined(RCC_CFGR2_ADCPRE34)
+#define LL_RCC_ADC34_CLKSOURCE RCC_CFGR2_ADCPRE34 /*!< ADC34 Clock source selection */
+#endif /*RCC_CFGR2_ADCPRE34*/
+#endif /*RCC_CFGR2_ADC1PRES*/
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRE12 || RCC_CFGR2_ADCPRE34 */
+
+#if defined(RCC_CFGR_SDPRE)
+/** @defgroup RCC_LL_EC_SDADC Peripheral SDADC get clock source
+ * @{
+ */
+#define LL_RCC_SDADC_CLKSOURCE RCC_CFGR_SDPRE /*!< SDADC Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR_SDPRE */
+
+
+/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection
+ * @{
+ */
+#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLL_MUL PLL Multiplicator factor
+ * @{
+ */
+#define LL_RCC_PLL_MUL_2 RCC_CFGR_PLLMUL2 /*!< PLL input clock*2 */
+#define LL_RCC_PLL_MUL_3 RCC_CFGR_PLLMUL3 /*!< PLL input clock*3 */
+#define LL_RCC_PLL_MUL_4 RCC_CFGR_PLLMUL4 /*!< PLL input clock*4 */
+#define LL_RCC_PLL_MUL_5 RCC_CFGR_PLLMUL5 /*!< PLL input clock*5 */
+#define LL_RCC_PLL_MUL_6 RCC_CFGR_PLLMUL6 /*!< PLL input clock*6 */
+#define LL_RCC_PLL_MUL_7 RCC_CFGR_PLLMUL7 /*!< PLL input clock*7 */
+#define LL_RCC_PLL_MUL_8 RCC_CFGR_PLLMUL8 /*!< PLL input clock*8 */
+#define LL_RCC_PLL_MUL_9 RCC_CFGR_PLLMUL9 /*!< PLL input clock*9 */
+#define LL_RCC_PLL_MUL_10 RCC_CFGR_PLLMUL10 /*!< PLL input clock*10 */
+#define LL_RCC_PLL_MUL_11 RCC_CFGR_PLLMUL11 /*!< PLL input clock*11 */
+#define LL_RCC_PLL_MUL_12 RCC_CFGR_PLLMUL12 /*!< PLL input clock*12 */
+#define LL_RCC_PLL_MUL_13 RCC_CFGR_PLLMUL13 /*!< PLL input clock*13 */
+#define LL_RCC_PLL_MUL_14 RCC_CFGR_PLLMUL14 /*!< PLL input clock*14 */
+#define LL_RCC_PLL_MUL_15 RCC_CFGR_PLLMUL15 /*!< PLL input clock*15 */
+#define LL_RCC_PLL_MUL_16 RCC_CFGR_PLLMUL16 /*!< PLL input clock*16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSOURCE PLL SOURCE
+ * @{
+ */
+#define LL_RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+#define LL_RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#else
+#define LL_RCC_PLLSOURCE_HSI_DIV_2 RCC_CFGR_PLLSRC_HSI_DIV2 /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_1 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV1) /*!< HSE clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_2 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV2) /*!< HSE/2 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_3 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV3) /*!< HSE/3 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_4 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV4) /*!< HSE/4 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_5 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV5) /*!< HSE/5 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_6 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV6) /*!< HSE/6 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_7 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV7) /*!< HSE/7 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_8 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV8) /*!< HSE/8 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_9 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV9) /*!< HSE/9 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_10 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV10) /*!< HSE/10 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_11 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV11) /*!< HSE/11 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_12 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV12) /*!< HSE/12 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_13 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV13) /*!< HSE/13 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_14 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV14) /*!< HSE/14 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_15 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV15) /*!< HSE/15 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_16 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV16) /*!< HSE/16 clock selected as PLL entry clock source */
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PREDIV_DIV PREDIV Division factor
+ * @{
+ */
+#define LL_RCC_PREDIV_DIV_1 RCC_CFGR2_PREDIV_DIV1 /*!< PREDIV input clock not divided */
+#define LL_RCC_PREDIV_DIV_2 RCC_CFGR2_PREDIV_DIV2 /*!< PREDIV input clock divided by 2 */
+#define LL_RCC_PREDIV_DIV_3 RCC_CFGR2_PREDIV_DIV3 /*!< PREDIV input clock divided by 3 */
+#define LL_RCC_PREDIV_DIV_4 RCC_CFGR2_PREDIV_DIV4 /*!< PREDIV input clock divided by 4 */
+#define LL_RCC_PREDIV_DIV_5 RCC_CFGR2_PREDIV_DIV5 /*!< PREDIV input clock divided by 5 */
+#define LL_RCC_PREDIV_DIV_6 RCC_CFGR2_PREDIV_DIV6 /*!< PREDIV input clock divided by 6 */
+#define LL_RCC_PREDIV_DIV_7 RCC_CFGR2_PREDIV_DIV7 /*!< PREDIV input clock divided by 7 */
+#define LL_RCC_PREDIV_DIV_8 RCC_CFGR2_PREDIV_DIV8 /*!< PREDIV input clock divided by 8 */
+#define LL_RCC_PREDIV_DIV_9 RCC_CFGR2_PREDIV_DIV9 /*!< PREDIV input clock divided by 9 */
+#define LL_RCC_PREDIV_DIV_10 RCC_CFGR2_PREDIV_DIV10 /*!< PREDIV input clock divided by 10 */
+#define LL_RCC_PREDIV_DIV_11 RCC_CFGR2_PREDIV_DIV11 /*!< PREDIV input clock divided by 11 */
+#define LL_RCC_PREDIV_DIV_12 RCC_CFGR2_PREDIV_DIV12 /*!< PREDIV input clock divided by 12 */
+#define LL_RCC_PREDIV_DIV_13 RCC_CFGR2_PREDIV_DIV13 /*!< PREDIV input clock divided by 13 */
+#define LL_RCC_PREDIV_DIV_14 RCC_CFGR2_PREDIV_DIV14 /*!< PREDIV input clock divided by 14 */
+#define LL_RCC_PREDIV_DIV_15 RCC_CFGR2_PREDIV_DIV15 /*!< PREDIV input clock divided by 15 */
+#define LL_RCC_PREDIV_DIV_16 RCC_CFGR2_PREDIV_DIV16 /*!< PREDIV input clock divided by 16 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in RCC register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in RCC register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
+ * @{
+ */
+
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetMultiplicator()
+ * , @ref LL_RCC_PLL_GetPrediv());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI)
+ * @param __PLLMUL__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @param __PLLPREDIV__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PREDIV_DIV_1
+ * @arg @ref LL_RCC_PREDIV_DIV_2
+ * @arg @ref LL_RCC_PREDIV_DIV_3
+ * @arg @ref LL_RCC_PREDIV_DIV_4
+ * @arg @ref LL_RCC_PREDIV_DIV_5
+ * @arg @ref LL_RCC_PREDIV_DIV_6
+ * @arg @ref LL_RCC_PREDIV_DIV_7
+ * @arg @ref LL_RCC_PREDIV_DIV_8
+ * @arg @ref LL_RCC_PREDIV_DIV_9
+ * @arg @ref LL_RCC_PREDIV_DIV_10
+ * @arg @ref LL_RCC_PREDIV_DIV_11
+ * @arg @ref LL_RCC_PREDIV_DIV_12
+ * @arg @ref LL_RCC_PREDIV_DIV_13
+ * @arg @ref LL_RCC_PREDIV_DIV_14
+ * @arg @ref LL_RCC_PREDIV_DIV_15
+ * @arg @ref LL_RCC_PREDIV_DIV_16
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__, __PLLPREDIV__) \
+ (((__INPUTFREQ__) / ((((__PLLPREDIV__) & RCC_CFGR2_PREDIV) + 1U))) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE / (@ref LL_RCC_PLL_GetPrediv () + 1), @ref LL_RCC_PLL_GetMultiplicator());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE div Prediv / HSI div 2)
+ * @param __PLLMUL__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__) \
+ ((__INPUTFREQ__) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U))
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+/**
+ * @brief Helper macro to calculate the HCLK frequency
+ * @note: __AHBPRESCALER__ be retrieved by @ref LL_RCC_GetAHBPrescaler
+ * ex: __LL_RCC_CALC_HCLK_FREQ(LL_RCC_GetAHBPrescaler())
+ * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK)
+ * @param __AHBPRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval HCLK clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK1 frequency (ABP1)
+ * @note: __APB1PRESCALER__ be retrieved by @ref LL_RCC_GetAPB1Prescaler
+ * ex: __LL_RCC_CALC_PCLK1_FREQ(LL_RCC_GetAPB1Prescaler())
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB1PRESCALER__: This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK2 frequency (ABP2)
+ * @note: __APB2PRESCALER__ be retrieved by @ref LL_RCC_GetAPB2Prescaler
+ * ex: __LL_RCC_CALC_PCLK2_FREQ(LL_RCC_GetAPB2Prescaler())
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB2PRESCALER__: This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ * @retval PCLK2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos])
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_LL_EF_HSE HSE
+ * @{
+ */
+
+/**
+ * @brief Enable the Clock Security System.
+ * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Disable the Clock Security System.
+ * @note Cannot be disabled in HSE is ready (only by hardware)
+ * @rmtoll CR CSSON LL_RCC_HSE_DisableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_DisableCSS(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Enable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Disable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Enable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Disable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Check if HSE oscillator Ready
+ * @rmtoll CR HSERDY LL_RCC_HSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_HSI HSI
+ * @{
+ */
+
+/**
+ * @brief Enable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Disable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Check if HSI clock is ready
+ * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY));
+}
+
+/**
+ * @brief Get HSI Calibration value
+ * @note When HSITRIM is written, HSICAL is updated with the sum of
+ * HSITRIM and the factory trim value
+ * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0xFF
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos);
+}
+
+/**
+ * @brief Set HSI Calibration trimming
+ * @note user-programmable trimming value that is added to the HSICAL
+ * @note Default value is 16, which, when added to the HSICAL value,
+ * should trim the HSI to 16 MHz +/- 1 %
+ * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming
+ * @param Value between Min_Data = 0x00 and Max_Data = 0x1F
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
+{
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos);
+}
+
+/**
+ * @brief Get HSI Calibration trimming
+ * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming
+ * @retval Between Min_Data = 0x00 and Max_Data = 0x1F
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSE LSE
+ * @{
+ */
+
+/**
+ * @brief Enable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Enable(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Disable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Disable(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Enable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Disable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Set LSE oscillator drive capability
+ * @note The oscillator is in Xtal mode when it is not in bypass mode.
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability
+ * @param LSEDrive This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
+}
+
+/**
+ * @brief Get LSE oscillator drive capability
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
+}
+
+/**
+ * @brief Check if LSE oscillator Ready
+ * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSI LSI
+ * @{
+ */
+
+/**
+ * @brief Enable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Enable(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Disable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Check if LSI is Ready
+ * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_System System
+ * @{
+ */
+
+/**
+ * @brief Configure the system clock source
+ * @rmtoll CFGR SW LL_RCC_SetSysClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source);
+}
+
+/**
+ * @brief Get the system clock source
+ * @rmtoll CFGR SWS LL_RCC_GetSysClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS));
+}
+
+/**
+ * @brief Set AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler);
+}
+
+/**
+ * @brief Set APB1 prescaler
+ * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler);
+}
+
+/**
+ * @brief Set APB2 prescaler
+ * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler);
+}
+
+/**
+ * @brief Get AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE));
+}
+
+/**
+ * @brief Get APB1 prescaler
+ * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1));
+}
+
+/**
+ * @brief Get APB2 prescaler
+ * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_MCO MCO
+ * @{
+ */
+
+/**
+ * @brief Configure MCOx
+ * @rmtoll CFGR MCO LL_RCC_ConfigMCO\n
+ * CFGR MCOPRE LL_RCC_ConfigMCO\n
+ * CFGR PLLNODIV LL_RCC_ConfigMCO
+ * @param MCOxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK
+ * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI
+ * @arg @ref LL_RCC_MCO1SOURCE_HSE
+ * @arg @ref LL_RCC_MCO1SOURCE_LSI
+ * @arg @ref LL_RCC_MCO1SOURCE_LSE
+ * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK (*)
+ * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK_DIV_2
+ *
+ * (*) value not defined in all devices
+ * @param MCOxPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1_DIV_1
+ * @arg @ref LL_RCC_MCO1_DIV_2 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_4 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_8 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_16 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_32 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_64 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_128 (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
+{
+#if defined(RCC_CFGR_MCOPRE)
+#if defined(RCC_CFGR_PLLNODIV)
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE | RCC_CFGR_PLLNODIV, MCOxSource | MCOxPrescaler);
+#else
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler);
+#endif /* RCC_CFGR_PLLNODIV */
+#else
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL, MCOxSource);
+#endif /* RCC_CFGR_MCOPRE */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
+ * @{
+ */
+
+/**
+ * @brief Configure USARTx clock source
+ * @rmtoll CFGR3 USART1SW LL_RCC_SetUSARTClockSource\n
+ * CFGR3 USART2SW LL_RCC_SetUSARTClockSource\n
+ * CFGR3 USART3SW LL_RCC_SetUSARTClockSource
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
+{
+ MODIFY_REG(RCC->CFGR3, (RCC_CFGR3_USART1SW << ((USARTxSource & 0xFF000000U) >> 24U)), (USARTxSource & 0x00FFFFFFU));
+}
+
+#if defined(RCC_CFGR3_UART4SW) || defined(RCC_CFGR3_UART5SW)
+/**
+ * @brief Configure UARTx clock source
+ * @rmtoll CFGR3 UART4SW LL_RCC_SetUARTClockSource\n
+ * CFGR3 UART5SW LL_RCC_SetUARTClockSource
+ * @param UARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource)
+{
+ MODIFY_REG(RCC->CFGR3, ((UARTxSource & 0x0000FFFFU) << 8U), (UARTxSource & (RCC_CFGR3_UART4SW | RCC_CFGR3_UART5SW)));
+}
+#endif /* RCC_CFGR3_UART4SW || RCC_CFGR3_UART5SW */
+
+/**
+ * @brief Configure I2Cx clock source
+ * @rmtoll CFGR3 I2C1SW LL_RCC_SetI2CClockSource\n
+ * CFGR3 I2C2SW LL_RCC_SetI2CClockSource\n
+ * CFGR3 I2C3SW LL_RCC_SetI2CClockSource
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
+{
+ MODIFY_REG(RCC->CFGR3, ((I2CxSource & 0xFF000000U) >> 24U), (I2CxSource & 0x00FFFFFFU));
+}
+
+#if defined(RCC_CFGR_I2SSRC)
+/**
+ * @brief Configure I2Sx clock source
+ * @rmtoll CFGR I2SSRC LL_RCC_SetI2SClockSource
+ * @param I2SxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2S_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2S_CLKSOURCE_PIN
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetI2SClockSource(uint32_t I2SxSource)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, I2SxSource);
+}
+#endif /* RCC_CFGR_I2SSRC */
+
+#if defined(RCC_CFGR3_TIMSW)
+/**
+ * @brief Configure TIMx clock source
+ * @rmtoll CFGR3 TIM1SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM8SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM15SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM16SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM17SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM20SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM2SW LL_RCC_SetTIMClockSource\n
+ * CFGR3 TIM34SW LL_RCC_SetTIMClockSource
+ * @param TIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_TIM8_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM8_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM16_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM16_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM17_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM17_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM20_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM20_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_TIM2_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM34_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_TIM34_CLKSOURCE_PLL (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetTIMClockSource(uint32_t TIMxSource)
+{
+ MODIFY_REG(RCC->CFGR3, (RCC_CFGR3_TIM1SW << (TIMxSource >> 27U)), (TIMxSource & 0x03FFFFFFU));
+}
+#endif /* RCC_CFGR3_TIMSW */
+
+#if defined(HRTIM1)
+/**
+ * @brief Configure HRTIMx clock source
+ * @rmtoll CFGR3 HRTIMSW LL_RCC_SetHRTIMClockSource
+ * @param HRTIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_HRTIM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_HRTIM1_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetHRTIMClockSource(uint32_t HRTIMxSource)
+{
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_HRTIMSW, HRTIMxSource);
+}
+#endif /* HRTIM1 */
+
+#if defined(CEC)
+/**
+ * @brief Configure CEC clock source
+ * @rmtoll CFGR3 CECSW LL_RCC_SetCECClockSource
+ * @param CECxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource)
+{
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, CECxSource);
+}
+#endif /* CEC */
+
+#if defined(USB)
+/**
+ * @brief Configure USB clock source
+ * @rmtoll CFGR USBPRE LL_RCC_SetUSBClockSource
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, USBxSource);
+}
+#endif /* USB */
+
+#if defined(RCC_CFGR_ADCPRE)
+/**
+ * @brief Configure ADC clock source
+ * @rmtoll CFGR ADCPRE LL_RCC_SetADCClockSource
+ * @param ADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_2
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_4
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_6
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, ADCxSource);
+}
+
+#elif defined(RCC_CFGR2_ADC1PRES)
+/**
+ * @brief Configure ADC clock source
+ * @rmtoll CFGR2 ADC1PRES LL_RCC_SetADCClockSource
+ * @param ADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC1_CLKSRC_HCLK
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_1
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_2
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_4
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_6
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_8
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_10
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_12
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_16
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_32
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_64
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_128
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_256
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource)
+{
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADC1PRES, ADCxSource);
+}
+
+#elif defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+/**
+ * @brief Configure ADC clock source
+ * @rmtoll CFGR2 ADCPRE12 LL_RCC_SetADCClockSource\n
+ * CFGR2 ADCPRE34 LL_RCC_SetADCClockSource
+ * @param ADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC12_CLKSRC_HCLK
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_1
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_2
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_4
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_6
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_8
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_10
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_12
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_16
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_32
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_64
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_128
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_256
+ * @arg @ref LL_RCC_ADC34_CLKSRC_HCLK (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_1 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_2 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_4 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_6 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_8 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_10 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_12 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_16 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_32 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_64 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_128 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_256 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource)
+{
+#if defined(RCC_CFGR2_ADCPRE34)
+ MODIFY_REG(RCC->CFGR2, (ADCxSource >> 16U), (ADCxSource & 0x0000FFFFU));
+#else
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, ADCxSource);
+#endif /* RCC_CFGR2_ADCPRE34 */
+}
+#endif /* RCC_CFGR_ADCPRE */
+
+#if defined(RCC_CFGR_SDPRE)
+/**
+ * @brief Configure SDADCx clock source
+ * @rmtoll CFGR SDPRE LL_RCC_SetSDADCClockSource
+ * @param SDADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_1
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_2
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_4
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_6
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_8
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_10
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_12
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_14
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_16
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_20
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_24
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_28
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_32
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_36
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_40
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_44
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_48
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSDADCClockSource(uint32_t SDADCxSource)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SDPRE, SDADCxSource);
+}
+#endif /* RCC_CFGR_SDPRE */
+
+/**
+ * @brief Get USARTx clock source
+ * @rmtoll CFGR3 USART1SW LL_RCC_GetUSARTClockSource\n
+ * CFGR3 USART2SW LL_RCC_GetUSARTClockSource\n
+ * CFGR3 USART3SW LL_RCC_GetUSARTClockSource
+ * @param USARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, (RCC_CFGR3_USART1SW << USARTx)) | (USARTx << 24U));
+}
+
+#if defined(RCC_CFGR3_UART4SW) || defined(RCC_CFGR3_UART5SW)
+/**
+ * @brief Get UARTx clock source
+ * @rmtoll CFGR3 UART4SW LL_RCC_GetUARTClockSource\n
+ * CFGR3 UART5SW LL_RCC_GetUARTClockSource
+ * @param UARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, UARTx) | (UARTx >> 8U));
+}
+#endif /* RCC_CFGR3_UART4SW || RCC_CFGR3_UART5SW */
+
+/**
+ * @brief Get I2Cx clock source
+ * @rmtoll CFGR3 I2C1SW LL_RCC_GetI2CClockSource\n
+ * CFGR3 I2C2SW LL_RCC_GetI2CClockSource\n
+ * CFGR3 I2C3SW LL_RCC_GetI2CClockSource
+ * @param I2Cx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, I2Cx) | (I2Cx << 24U));
+}
+
+#if defined(RCC_CFGR_I2SSRC)
+/**
+ * @brief Get I2Sx clock source
+ * @rmtoll CFGR I2SSRC LL_RCC_GetI2SClockSource
+ * @param I2Sx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2S_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_I2S_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2S_CLKSOURCE_PIN
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetI2SClockSource(uint32_t I2Sx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, I2Sx));
+}
+#endif /* RCC_CFGR_I2SSRC */
+
+#if defined(RCC_CFGR3_TIMSW)
+/**
+ * @brief Get TIMx clock source
+ * @rmtoll CFGR3 TIM1SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM8SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM15SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM16SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM17SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM20SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM2SW LL_RCC_GetTIMClockSource\n
+ * CFGR3 TIM34SW LL_RCC_GetTIMClockSource
+ * @param TIMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_TIM1_CLKSOURCE
+ * @arg @ref LL_RCC_TIM2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM8_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM15_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM16_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM17_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM20_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM34_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_TIM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_TIM1_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_TIM8_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM8_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM15_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM15_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM16_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM16_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM17_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM17_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM20_CLKSOURCE_PCLK2 (*)
+ * @arg @ref LL_RCC_TIM20_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_TIM2_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_TIM34_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_TIM34_CLKSOURCE_PLL (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetTIMClockSource(uint32_t TIMx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, (RCC_CFGR3_TIM1SW << TIMx)) | (TIMx << 27U));
+}
+#endif /* RCC_CFGR3_TIMSW */
+
+#if defined(HRTIM1)
+/**
+ * @brief Get HRTIMx clock source
+ * @rmtoll CFGR3 HRTIMSW LL_RCC_GetHRTIMClockSource
+ * @param HRTIMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_HRTIM1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_HRTIM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_HRTIM1_CLKSOURCE_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetHRTIMClockSource(uint32_t HRTIMx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, HRTIMx));
+}
+#endif /* HRTIM1 */
+
+#if defined(CEC)
+/**
+ * @brief Get CEC clock source
+ * @rmtoll CFGR3 CECSW LL_RCC_GetCECClockSource
+ * @param CECx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, CECx));
+}
+#endif /* CEC */
+
+#if defined(USB)
+/**
+ * @brief Get USBx clock source
+ * @rmtoll CFGR USBPRE LL_RCC_GetUSBClockSource
+ * @param USBx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, USBx));
+}
+#endif /* USB */
+
+#if defined(RCC_CFGR_ADCPRE)
+/**
+ * @brief Get ADCx clock source
+ * @rmtoll CFGR ADCPRE LL_RCC_GetADCClockSource
+ * @param ADCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_2
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_4
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_6
+ * @arg @ref LL_RCC_ADC_CLKSRC_PCLK2_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, ADCx));
+}
+
+#elif defined(RCC_CFGR2_ADC1PRES)
+/**
+ * @brief Get ADCx clock source
+ * @rmtoll CFGR2 ADC1PRES LL_RCC_GetADCClockSource
+ * @param ADCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_ADC1_CLKSRC_HCLK
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_1
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_2
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_4
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_6
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_8
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_10
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_12
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_16
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_32
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_64
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_128
+ * @arg @ref LL_RCC_ADC1_CLKSRC_PLL_DIV_256
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR2, ADCx));
+}
+
+#elif defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+/**
+ * @brief Get ADCx clock source
+ * @rmtoll CFGR2 ADCPRE12 LL_RCC_GetADCClockSource\n
+ * CFGR2 ADCPRE34 LL_RCC_GetADCClockSource
+ * @param ADCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC12_CLKSOURCE
+ * @arg @ref LL_RCC_ADC34_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_ADC12_CLKSRC_HCLK
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_1
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_2
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_4
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_6
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_8
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_10
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_12
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_16
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_32
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_64
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_128
+ * @arg @ref LL_RCC_ADC12_CLKSRC_PLL_DIV_256
+ * @arg @ref LL_RCC_ADC34_CLKSRC_HCLK (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_1 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_2 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_4 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_6 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_8 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_10 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_12 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_16 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_32 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_64 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_128 (*)
+ * @arg @ref LL_RCC_ADC34_CLKSRC_PLL_DIV_256 (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx)
+{
+#if defined(RCC_CFGR2_ADCPRE34)
+ return (uint32_t)(READ_BIT(RCC->CFGR2, ADCx) | (ADCx << 16U));
+#else
+ return (uint32_t)(READ_BIT(RCC->CFGR2, ADCx));
+#endif /*RCC_CFGR2_ADCPRE34*/
+}
+#endif /* RCC_CFGR_ADCPRE */
+
+#if defined(RCC_CFGR_SDPRE)
+/**
+ * @brief Get SDADCx clock source
+ * @rmtoll CFGR SDPRE LL_RCC_GetSDADCClockSource
+ * @param SDADCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDADC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_1
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_2
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_4
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_6
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_8
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_10
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_12
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_14
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_16
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_20
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_24
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_28
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_32
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_36
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_40
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_44
+ * @arg @ref LL_RCC_SDADC_CLKSRC_SYS_DIV_48
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSDADCClockSource(uint32_t SDADCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, SDADCx));
+}
+#endif /* RCC_CFGR_SDPRE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_RTC RTC
+ * @{
+ */
+
+/**
+ * @brief Set RTC Clock Source
+ * @note Once the RTC clock source has been selected, it cannot be changed any more unless
+ * the Backup domain is reset. The BDRST bit can be used to reset them.
+ * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
+}
+
+/**
+ * @brief Get RTC Clock Source
+ * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
+}
+
+/**
+ * @brief Enable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_EnableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableRTC(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Disable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_DisableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableRTC(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Check if RTC has been enabled or not
+ * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN));
+}
+
+/**
+ * @brief Force the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @brief Release the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_PLL PLL
+ * @{
+ */
+
+/**
+ * @brief Enable PLL
+ * @rmtoll CR PLLON LL_RCC_PLL_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Disable PLL
+ * @note Cannot be disabled if the PLL clock is used as the system clock
+ * @rmtoll CR PLLON LL_RCC_PLL_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Check if PLL Ready
+ * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY));
+}
+
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+/**
+ * @brief Configure PLL used for SYSCLK Domain
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLMul This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @param PLLDiv This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PREDIV_DIV_1
+ * @arg @ref LL_RCC_PREDIV_DIV_2
+ * @arg @ref LL_RCC_PREDIV_DIV_3
+ * @arg @ref LL_RCC_PREDIV_DIV_4
+ * @arg @ref LL_RCC_PREDIV_DIV_5
+ * @arg @ref LL_RCC_PREDIV_DIV_6
+ * @arg @ref LL_RCC_PREDIV_DIV_7
+ * @arg @ref LL_RCC_PREDIV_DIV_8
+ * @arg @ref LL_RCC_PREDIV_DIV_9
+ * @arg @ref LL_RCC_PREDIV_DIV_10
+ * @arg @ref LL_RCC_PREDIV_DIV_11
+ * @arg @ref LL_RCC_PREDIV_DIV_12
+ * @arg @ref LL_RCC_PREDIV_DIV_13
+ * @arg @ref LL_RCC_PREDIV_DIV_14
+ * @arg @ref LL_RCC_PREDIV_DIV_15
+ * @arg @ref LL_RCC_PREDIV_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul, uint32_t PLLDiv)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, Source | PLLMul);
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, PLLDiv);
+}
+
+#else
+
+/**
+ * @brief Configure PLL used for SYSCLK Domain
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_1
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_2
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_3
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_4
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_5
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_6
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_7
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_8
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_9
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_10
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_11
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_12
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_13
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_14
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_15
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_16
+ * @param PLLMul This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, (Source & RCC_CFGR_PLLSRC) | PLLMul);
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (Source & RCC_CFGR2_PREDIV));
+}
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+
+/**
+ * @brief Get the oscillator used as PLL clock source.
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_GetMainSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI (*)
+ * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*)
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ *
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC));
+}
+
+/**
+ * @brief Get PLL multiplication Factor
+ * @rmtoll CFGR PLLMUL LL_RCC_PLL_GetMultiplicator
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetMultiplicator(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLMUL));
+}
+
+/**
+ * @brief Get PREDIV division factor for the main PLL
+ * @note They can be written only when the PLL is disabled
+ * @rmtoll CFGR2 PREDIV LL_RCC_PLL_GetPrediv
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PREDIV_DIV_1
+ * @arg @ref LL_RCC_PREDIV_DIV_2
+ * @arg @ref LL_RCC_PREDIV_DIV_3
+ * @arg @ref LL_RCC_PREDIV_DIV_4
+ * @arg @ref LL_RCC_PREDIV_DIV_5
+ * @arg @ref LL_RCC_PREDIV_DIV_6
+ * @arg @ref LL_RCC_PREDIV_DIV_7
+ * @arg @ref LL_RCC_PREDIV_DIV_8
+ * @arg @ref LL_RCC_PREDIV_DIV_9
+ * @arg @ref LL_RCC_PREDIV_DIV_10
+ * @arg @ref LL_RCC_PREDIV_DIV_11
+ * @arg @ref LL_RCC_PREDIV_DIV_12
+ * @arg @ref LL_RCC_PREDIV_DIV_13
+ * @arg @ref LL_RCC_PREDIV_DIV_14
+ * @arg @ref LL_RCC_PREDIV_DIV_15
+ * @arg @ref LL_RCC_PREDIV_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Clear LSI ready interrupt flag
+ * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC);
+}
+
+/**
+ * @brief Clear LSE ready interrupt flag
+ * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSERDYC);
+}
+
+/**
+ * @brief Clear HSI ready interrupt flag
+ * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC);
+}
+
+/**
+ * @brief Clear HSE ready interrupt flag
+ * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSERDYC);
+}
+
+/**
+ * @brief Clear PLL ready interrupt flag
+ * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC);
+}
+
+/**
+ * @brief Clear Clock security system interrupt flag
+ * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_CSSC);
+}
+
+/**
+ * @brief Check if LSI ready interrupt occurred or not
+ * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF));
+}
+
+/**
+ * @brief Check if LSE ready interrupt occurred or not
+ * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF));
+}
+
+/**
+ * @brief Check if HSI ready interrupt occurred or not
+ * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF));
+}
+
+/**
+ * @brief Check if HSE ready interrupt occurred or not
+ * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF));
+}
+
+#if defined(RCC_CFGR_MCOF)
+/**
+ * @brief Check if switch to new MCO source is effective or not
+ * @rmtoll CFGR MCOF LL_RCC_IsActiveFlag_MCO1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MCO1(void)
+{
+ return (READ_BIT(RCC->CFGR, RCC_CFGR_MCOF) == (RCC_CFGR_MCOF));
+}
+#endif /* RCC_CFGR_MCOF */
+
+/**
+ * @brief Check if PLL ready interrupt occurred or not
+ * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF));
+}
+
+/**
+ * @brief Check if Clock security system interrupt occurred or not
+ * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF));
+}
+
+/**
+ * @brief Check if RCC flag Independent Watchdog reset is set or not.
+ * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Low Power reset is set or not.
+ * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF));
+}
+
+/**
+ * @brief Check if RCC flag is set or not.
+ * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Pin reset is set or not.
+ * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF));
+}
+
+/**
+ * @brief Check if RCC flag POR/PDR reset is set or not.
+ * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Software reset is set or not.
+ * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Window Watchdog reset is set or not.
+ * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF));
+}
+
+#if defined(RCC_CSR_V18PWRRSTF)
+/**
+ * @brief Check if RCC Reset flag of the 1.8 V domain is set or not.
+ * @rmtoll CSR V18PWRRSTF LL_RCC_IsActiveFlag_V18PWRRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_V18PWRRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_V18PWRRSTF) == (RCC_CSR_V18PWRRSTF));
+}
+#endif /* RCC_CSR_V18PWRRSTF */
+
+/**
+ * @brief Set RMVF bit to clear the reset flags.
+ * @rmtoll CSR RMVF LL_RCC_ClearResetFlags
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_IT_Management IT Management
+ * @{
+ */
+
+/**
+ * @brief Enable LSI ready interrupt
+ * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
+}
+
+/**
+ * @brief Enable LSE ready interrupt
+ * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
+}
+
+/**
+ * @brief Enable HSI ready interrupt
+ * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
+}
+
+/**
+ * @brief Enable HSE ready interrupt
+ * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
+}
+
+/**
+ * @brief Enable PLL ready interrupt
+ * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
+}
+
+/**
+ * @brief Disable LSI ready interrupt
+ * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
+}
+
+/**
+ * @brief Disable LSE ready interrupt
+ * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
+}
+
+/**
+ * @brief Disable HSI ready interrupt
+ * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
+}
+
+/**
+ * @brief Disable HSE ready interrupt
+ * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
+}
+
+/**
+ * @brief Disable PLL ready interrupt
+ * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
+}
+
+/**
+ * @brief Checks if LSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE));
+}
+
+/**
+ * @brief Checks if LSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE));
+}
+
+/**
+ * @brief Checks if HSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE));
+}
+
+/**
+ * @brief Checks if HSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE));
+}
+
+/**
+ * @brief Checks if PLL ready interrupt source is enabled or disabled.
+ * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_RCC_DeInit(void);
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
+ * @{
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
+#if defined(UART4) || defined(UART5)
+uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource);
+#endif /* UART4 || UART5 */
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
+#if defined(RCC_CFGR_I2SSRC)
+uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource);
+#endif /* RCC_CFGR_I2SSRC */
+#if defined(USB_OTG_FS) || defined(USB)
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
+#endif /* USB_OTG_FS || USB */
+#if (defined(RCC_CFGR_ADCPRE) || defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34))
+uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource);
+#endif /*RCC_CFGR_ADCPRE || RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRE12 || RCC_CFGR2_ADCPRE34 */
+#if defined(RCC_CFGR_SDPRE)
+uint32_t LL_RCC_GetSDADCClockFreq(uint32_t SDADCxSource);
+#endif /*RCC_CFGR_SDPRE */
+#if defined(CEC)
+uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource);
+#endif /* CEC */
+#if defined(RCC_CFGR3_TIMSW)
+uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource);
+#endif /*RCC_CFGR3_TIMSW*/
+uint32_t LL_RCC_GetHRTIMClockFreq(uint32_t HRTIMxSource);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* RCC */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_system.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_system.h
new file mode 100644
index 00000000..d306226f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_system.h
@@ -0,0 +1,1740 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_system.h
+ * @author MCD Application Team
+ * @brief Header file of SYSTEM LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL SYSTEM driver contains a set of generic APIs that can be
+ used by user:
+ (+) Some of the FLASH features need to be handled in the SYSTEM file.
+ (+) Access to DBGCMU registers
+ (+) Access to SYSCFG registers
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_SYSTEM_H
+#define __STM32F3xx_LL_SYSTEM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
+
+/** @defgroup SYSTEM_LL SYSTEM
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
+ * @{
+ */
+
+/* Offset used to access to SYSCFG_CFGR1 and SYSCFG_CFGR3 registers */
+#define SYSCFG_OFFSET_CFGR1 0x00000000U
+#define SYSCFG_OFFSET_CFGR3 0x00000050U
+
+/* Mask used for TIM breaks functions */
+#if defined(SYSCFG_CFGR2_PVD_LOCK) && defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+#define SYSCFG_MASK_TIM_BREAK (SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK | SYSCFG_CFGR2_PVD_LOCK)
+#elif defined(SYSCFG_CFGR2_PVD_LOCK) && !defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+#define SYSCFG_MASK_TIM_BREAK (SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_PVD_LOCK)
+#elif !defined(SYSCFG_CFGR2_PVD_LOCK) && defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+#define SYSCFG_MASK_TIM_BREAK (SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+#else
+#define SYSCFG_MASK_TIM_BREAK (SYSCFG_CFGR2_LOCKUP_LOCK)
+#endif /* SYSCFG_CFGR2_PVD_LOCK && SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
+ * @{
+ */
+
+/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
+ * @{
+ */
+#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000 /* Main Flash memory mapped at 0x00000000 */
+#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /* System Flash memory mapped at 0x00000000 */
+#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /* Embedded SRAM mapped at 0x00000000 */
+#if defined(FMC_BANK1)
+#define LL_SYSCFG_REMAP_FMC SYSCFG_CFGR1_MEM_MODE_2 /*CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory);
+}
+
+/**
+ * @brief Get memory mapping at address 0x00000000
+ * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_REMAP_FLASH
+ * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
+ * @arg @ref LL_SYSCFG_REMAP_SRAM
+ * @arg @ref LL_SYSCFG_REMAP_FMC (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE));
+}
+
+#if defined(SYSCFG_CFGR3_SPI1_RX_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for SPI
+ * @rmtoll SYSCFG_CFGR3 SPI1_RX_DMA_RMP LL_SYSCFG_SetRemapDMA_SPI\n
+ * SYSCFG_CFGR3 SPI1_TX_DMA_RMP LL_SYSCFG_SetRemapDMA_SPI
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_SPI1RX_RMP_DMA1_CH2
+ * @arg @ref LL_SYSCFG_SPI1RX_RMP_DMA1_CH4
+ * @arg @ref LL_SYSCFG_SPI1RX_RMP_DMA1_CH6
+ * @arg @ref LL_SYSCFG_SPI1TX_RMP_DMA1_CH3
+ * @arg @ref LL_SYSCFG_SPI1TX_RMP_DMA1_CH5
+ * @arg @ref LL_SYSCFG_SPI1TX_RMP_DMA1_CH7
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_SPI(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR3, (Remap >> 16U), (Remap & 0x0000FFFF));
+}
+#endif /* SYSCFG_CFGR3_SPI1_RX_DMA_RMP */
+
+#if defined(SYSCFG_CFGR3_I2C1_RX_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for I2C
+ * @rmtoll SYSCFG_CFGR3 I2C1_RX_DMA_RMP LL_SYSCFG_SetRemapDMA_I2C\n
+ * SYSCFG_CFGR3 I2C1_TX_DMA_RMP LL_SYSCFG_SetRemapDMA_I2C
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_I2C1RX_RMP_DMA1_CH7
+ * @arg @ref LL_SYSCFG_I2C1RX_RMP_DMA1_CH3
+ * @arg @ref LL_SYSCFG_I2C1RX_RMP_DMA1_CH5
+ * @arg @ref LL_SYSCFG_I2C1TX_RMP_DMA1_CH6
+ * @arg @ref LL_SYSCFG_I2C1TX_RMP_DMA1_CH2
+ * @arg @ref LL_SYSCFG_I2C1TX_RMP_DMA1_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_I2C(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR3, (Remap >> 16U), (Remap & 0x0000FFFF));
+}
+#endif /* SYSCFG_CFGR3_I2C1_RX_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_ADC24_DMA_RMP) || defined(SYSCFG_CFGR3_ADC2_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for ADC
+ * @rmtoll SYSCFG_CFGR1 ADC24_DMA_RMP LL_SYSCFG_SetRemapDMA_ADC\n
+ * SYSCFG_CFGR3 ADC2_DMA_RMP LL_SYSCFG_SetRemapDMA_ADC
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_ADC24_RMP_DMA2_CH12 (*)
+ * @arg @ref LL_SYSCFG_ADC24_RMP_DMA2_CH34 (*)
+ * @arg @ref LL_SYSCFG_ADC2_RMP_DMA1_CH2 (*)
+ * @arg @ref LL_SYSCFG_ADC2_RMP_DMA1_CH4 (*)
+ * @arg @ref LL_SYSCFG_ADC2_RMP_DMA2 (*)
+ * @arg @ref LL_SYSCFG_ADC2_RMP_DMA1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_ADC(uint32_t Remap)
+{
+ __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(SYSCFG_BASE + (Remap >> 24U));
+ MODIFY_REG(*reg, (Remap & 0x00FF0000U) >> 8U, (Remap & 0x0000FFFFU));
+}
+#endif /* SYSCFG_CFGR1_ADC24_DMA_RMP || SYSCFG_CFGR3_ADC2_DMA_RMP */
+
+/**
+ * @brief Set DMA request remapping bits for DAC
+ * @rmtoll SYSCFG_CFGR1 TIM6DAC1Ch1_DMA_RMP LL_SYSCFG_SetRemapDMA_DAC\n
+ * SYSCFG_CFGR1 DAC2Ch1_DMA_RMP LL_SYSCFG_SetRemapDMA_DAC
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_DAC1_CH1_RMP_DMA2_CH3
+ * @arg @ref LL_SYSCFG_DAC1_CH1_RMP_DMA1_CH3
+ * @arg @ref LL_SYSCFG_DAC1_OUT2_RMP_DMA2_CH4 (*)
+ * @arg @ref LL_SYSCFG_DAC1_OUT2_RMP_DMA1_CH4 (*)
+ * @arg @ref LL_SYSCFG_DAC2_OUT1_RMP_DMA2_CH5 (*)
+ * @arg @ref LL_SYSCFG_DAC2_OUT1_RMP_DMA1_CH5 (*)
+ * @arg @ref LL_SYSCFG_DAC2_CH1_RMP_NO (*)
+ * @arg @ref LL_SYSCFG_DAC2_CH1_RMP_DMA1_CH5 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_DAC(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, (Remap & 0x00FF0000U) >> 8U, (Remap & 0x0000FF00U));
+}
+
+/**
+ * @brief Set DMA request remapping bits for TIM
+ * @rmtoll SYSCFG_CFGR1 TIM16_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM17_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM6DAC1Ch1_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM7DAC1Ch2_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM18DAC2Ch1_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM
+ * @param Remap This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH3 or @ref LL_SYSCFG_TIM16_RMP_DMA1_CH6
+ * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH1 or @ref LL_SYSCFG_TIM17_RMP_DMA1_CH7
+ * @arg @ref LL_SYSCFG_TIM6_RMP_DMA2_CH3 or @ref LL_SYSCFG_TIM6_RMP_DMA1_CH3
+ * @arg @ref LL_SYSCFG_TIM7_RMP_DMA2_CH4 or @ref LL_SYSCFG_TIM7_RMP_DMA1_CH4 (*)
+ * @arg @ref LL_SYSCFG_TIM18_RMP_DMA2_CH5 or @ref LL_SYSCFG_TIM18_RMP_DMA1_CH5 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_TIM(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, (Remap & 0x00FF0000U) >> 8U, (Remap & 0x0000FF00U));
+}
+
+#if defined(SYSCFG_CFGR1_TIM1_ITR3_RMP) || defined(SYSCFG_CFGR1_ENCODER_MODE)
+/**
+ * @brief Set Timer input remap
+ * @rmtoll SYSCFG_CFGR1 TIM1_ITR3_RMP LL_SYSCFG_SetRemapInput_TIM\n
+ * SYSCFG_CFGR1 ENCODER_MODE LL_SYSCFG_SetRemapInput_TIM
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_TIM1_ITR3_RMP_TIM4_TRGO (*)
+ * @arg @ref LL_SYSCFG_TIM1_ITR3_RMP_TIM17_OC (*)
+ * @arg @ref LL_SYSCFG_TIM15_ENCODEMODE_NOREDIRECTION (*)
+ * @arg @ref LL_SYSCFG_TIM15_ENCODEMODE_TIM2 (*)
+ * @arg @ref LL_SYSCFG_TIM15_ENCODEMODE_TIM3 (*)
+ * @arg @ref LL_SYSCFG_TIM15_ENCODEMODE_TIM4 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapInput_TIM(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, (Remap & 0xFF00FF00U) >> 8U, (Remap & 0x00FF00FFU));
+}
+#endif /* SYSCFG_CFGR1_TIM1_ITR3_RMP || SYSCFG_CFGR1_ENCODER_MODE */
+
+#if defined(SYSCFG_CFGR4_ADC12_EXT2_RMP)
+/**
+ * @brief Set ADC Trigger remap
+ * @rmtoll SYSCFG_CFGR4 ADC12_EXT2_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_EXT3_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_EXT5_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_EXT13_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_EXT15_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_JEXT3_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_JEXT6_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC12_JEXT13_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC34_EXT5_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC34_EXT6_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC34_EXT15_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC34_JEXT5_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC34_JEXT11_RMP LL_SYSCFG_SetRemapTrigger_ADC\n
+ * SYSCFG_CFGR4 ADC34_JEXT14_RMP LL_SYSCFG_SetRemapTrigger_ADC
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_ADC12_EXT2_RMP_TIM1_CC3
+ * @arg @ref LL_SYSCFG_ADC12_EXT2_RMP_TIM20_TRGO
+ * @arg @ref LL_SYSCFG_ADC12_EXT3_RMP_TIM2_CC2
+ * @arg @ref LL_SYSCFG_ADC12_EXT3_RMP_TIM20_TRGO2
+ * @arg @ref LL_SYSCFG_ADC12_EXT5_RMP_TIM4_CC4
+ * @arg @ref LL_SYSCFG_ADC12_EXT5_RMP_TIM20_CC1
+ * @arg @ref LL_SYSCFG_ADC12_EXT13_RMP_TIM6_TRGO
+ * @arg @ref LL_SYSCFG_ADC12_EXT13_RMP_TIM20_CC2
+ * @arg @ref LL_SYSCFG_ADC12_EXT15_RMP_TIM3_CC4
+ * @arg @ref LL_SYSCFG_ADC12_EXT15_RMP_TIM20_CC3
+ * @arg @ref LL_SYSCFG_ADC12_JEXT3_RMP_TIM2_CC1
+ * @arg @ref LL_SYSCFG_ADC12_JEXT3_RMP_TIM20_TRGO
+ * @arg @ref LL_SYSCFG_ADC12_JEXT6_RMP_EXTI_LINE_15
+ * @arg @ref LL_SYSCFG_ADC12_JEXT6_RMP_TIM20_TRGO2
+ * @arg @ref LL_SYSCFG_ADC12_JEXT13_RMP_TIM3_CC1
+ * @arg @ref LL_SYSCFG_ADC12_JEXT13_RMP_TIM20_CC4
+ * @arg @ref LL_SYSCFG_ADC34_EXT5_RMP_EXTI_LINE_2
+ * @arg @ref LL_SYSCFG_ADC34_EXT5_RMP_TIM20_TRGO
+ * @arg @ref LL_SYSCFG_ADC34_EXT6_RMP_TIM4_CC1
+ * @arg @ref LL_SYSCFG_ADC34_EXT6_RMP_TIM20_TRGO2
+ * @arg @ref LL_SYSCFG_ADC34_EXT15_RMP_TIM2_CC1
+ * @arg @ref LL_SYSCFG_ADC34_EXT15_RMP_TIM20_CC1
+ * @arg @ref LL_SYSCFG_ADC34_JEXT5_RMP_TIM4_CC3
+ * @arg @ref LL_SYSCFG_ADC34_JEXT5_RMP_TIM20_TRGO
+ * @arg @ref LL_SYSCFG_ADC34_JEXT11_RMP_TIM1_CC3
+ * @arg @ref LL_SYSCFG_ADC34_JEXT11_RMP_TIM20_TRGO2
+ * @arg @ref LL_SYSCFG_ADC34_JEXT14_RMP_TIM7_TRGO
+ * @arg @ref LL_SYSCFG_ADC34_JEXT14_RMP_TIM20_CC2
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapTrigger_ADC(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR4, (Remap & 0xFFFF0000U) >> 16U, (Remap & 0x0000FFFFU));
+}
+#endif /* SYSCFG_CFGR4_ADC12_EXT2_RMP */
+
+#if defined(SYSCFG_CFGR1_DAC1_TRIG1_RMP) || defined(SYSCFG_CFGR3_TRIGGER_RMP)
+/**
+ * @brief Set DAC Trigger remap
+ * @rmtoll SYSCFG_CFGR1 DAC1_TRIG1_RMP LL_SYSCFG_SetRemapTrigger_DAC\n
+ * SYSCFG_CFGR3 DAC1_TRG3_RMP LL_SYSCFG_SetRemapTrigger_DAC\n
+ * SYSCFG_CFGR3 DAC1_TRG5_RMP LL_SYSCFG_SetRemapTrigger_DAC
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_DAC1_TRIG1_RMP_TIM8_TRGO (*)
+ * @arg @ref LL_SYSCFG_DAC1_TRIG1_RMP_TIM3_TRGO (*)
+ * @arg @ref LL_SYSCFG_DAC1_TRIG3_RMP_TIM15_TRGO (*)
+ * @arg @ref LL_SYSCFG_DAC1_TRIG3_RMP_HRTIM1_DAC1_TRIG1 (*)
+ * @arg @ref LL_SYSCFG_DAC1_TRIG5_RMP_NO (*)
+ * @arg @ref LL_SYSCFG_DAC1_TRIG5_RMP_HRTIM1_DAC1_TRIG2 (*)
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapTrigger_DAC(uint32_t Remap)
+{
+ __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(SYSCFG_BASE + (Remap >> 24U));
+ MODIFY_REG(*reg, (Remap & 0x00F00F00U) >> 4U, (Remap & 0x000F00F0U));
+}
+#endif /* SYSCFG_CFGR1_DAC1_TRIG1_RMP || SYSCFG_CFGR3_TRIGGER_RMP */
+
+#if defined(SYSCFG_CFGR1_USB_IT_RMP)
+/**
+ * @brief Enable USB interrupt remap
+ * @note Remap the USB interrupts (USB_HP, USB_LP and USB_WKUP) on interrupt lines 74, 75 and 76
+ * respectively
+ * @rmtoll SYSCFG_CFGR1 USB_IT_RMP LL_SYSCFG_EnableRemapIT_USB
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableRemapIT_USB(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_USB_IT_RMP);
+}
+
+/**
+ * @brief Disable USB interrupt remap
+ * @rmtoll SYSCFG_CFGR1 USB_IT_RMP LL_SYSCFG_DisableRemapIT_USB
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableRemapIT_USB(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_USB_IT_RMP);
+}
+#endif /* SYSCFG_CFGR1_USB_IT_RMP */
+
+#if defined(SYSCFG_CFGR1_VBAT)
+/**
+ * @brief Enable VBAT monitoring (to enable the power switch to deliver VBAT voltage on ADC channel 18 input)
+ * @rmtoll SYSCFG_CFGR1 VBAT LL_SYSCFG_EnableVBATMonitoring
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableVBATMonitoring(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_VBAT);
+}
+
+/**
+ * @brief Disable VBAT monitoring
+ * @rmtoll SYSCFG_CFGR1 VBAT LL_SYSCFG_DisableVBATMonitoring
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableVBATMonitoring(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_VBAT);
+}
+#endif /* SYSCFG_CFGR1_VBAT */
+
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @rmtoll SYSCFG_CFGR1 I2C_PB6_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_PB7_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_PB8_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_PB9_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C1_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C2_FMP LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C3_FMP LL_SYSCFG_EnableFastModePlus
+ * @param ConfigFastModePlus This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @rmtoll SYSCFG_CFGR1 I2C_PB6_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_PB7_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_PB8_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_PB9_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C1_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C2_FMP LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C3_FMP LL_SYSCFG_DisableFastModePlus
+ * @param ConfigFastModePlus This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
+}
+
+/**
+ * @brief Enable Floating Point Unit Invalid operation Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_EnableIT_FPU_IOC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IOC(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0);
+}
+
+/**
+ * @brief Enable Floating Point Unit Divide-by-zero Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_EnableIT_FPU_DZC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_DZC(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1);
+}
+
+/**
+ * @brief Enable Floating Point Unit Underflow Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_EnableIT_FPU_UFC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_UFC(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2);
+}
+
+/**
+ * @brief Enable Floating Point Unit Overflow Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_EnableIT_FPU_OFC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_OFC(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3);
+}
+
+/**
+ * @brief Enable Floating Point Unit Input denormal Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_EnableIT_FPU_IDC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IDC(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4);
+}
+
+/**
+ * @brief Enable Floating Point Unit Inexact Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_EnableIT_FPU_IXC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IXC(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5);
+}
+
+/**
+ * @brief Disable Floating Point Unit Invalid operation Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_DisableIT_FPU_IOC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IOC(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0);
+}
+
+/**
+ * @brief Disable Floating Point Unit Divide-by-zero Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_DisableIT_FPU_DZC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_DZC(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1);
+}
+
+/**
+ * @brief Disable Floating Point Unit Underflow Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_DisableIT_FPU_UFC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_UFC(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2);
+}
+
+/**
+ * @brief Disable Floating Point Unit Overflow Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_DisableIT_FPU_OFC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_OFC(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3);
+}
+
+/**
+ * @brief Disable Floating Point Unit Input denormal Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_DisableIT_FPU_IDC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IDC(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4);
+}
+
+/**
+ * @brief Disable Floating Point Unit Inexact Interrupt
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_DisableIT_FPU_IXC
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IXC(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5);
+}
+
+/**
+ * @brief Check if Floating Point Unit Invalid operation Interrupt source is enabled or disabled.
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_IsEnabledIT_FPU_IOC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IOC(void)
+{
+ return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0) == (SYSCFG_CFGR1_FPU_IE_0));
+}
+
+/**
+ * @brief Check if Floating Point Unit Divide-by-zero Interrupt source is enabled or disabled.
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_IsEnabledIT_FPU_DZC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_DZC(void)
+{
+ return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1) == (SYSCFG_CFGR1_FPU_IE_1));
+}
+
+/**
+ * @brief Check if Floating Point Unit Underflow Interrupt source is enabled or disabled.
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_IsEnabledIT_FPU_UFC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_UFC(void)
+{
+ return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2) == (SYSCFG_CFGR1_FPU_IE_2));
+}
+
+/**
+ * @brief Check if Floating Point Unit Overflow Interrupt source is enabled or disabled.
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_IsEnabledIT_FPU_OFC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_OFC(void)
+{
+ return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3) == (SYSCFG_CFGR1_FPU_IE_3));
+}
+
+/**
+ * @brief Check if Floating Point Unit Input denormal Interrupt source is enabled or disabled.
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_IsEnabledIT_FPU_IDC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IDC(void)
+{
+ return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4) == (SYSCFG_CFGR1_FPU_IE_4));
+}
+
+/**
+ * @brief Check if Floating Point Unit Inexact Interrupt source is enabled or disabled.
+ * @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_IsEnabledIT_FPU_IXC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IXC(void)
+{
+ return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5) == (SYSCFG_CFGR1_FPU_IE_5));
+}
+
+/**
+ * @brief Configure source input for the EXTI external interrupt.
+ * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI4 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI5 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI6 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI7 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI8 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI9 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI10 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI11 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI12 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI13 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI14 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI15 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI0 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI1 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI2 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI3 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI8 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI9 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI10 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI11 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI12 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI13 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI14 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI15 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI0 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI1 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI2 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI3 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI4 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI5 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI6 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI7 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI12 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI13 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI14 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI15 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI0 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI1 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI2 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI3 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI4 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI5 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI6 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI7 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI8 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI9 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI10 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI11 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource
+ * @param Port This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_PORTA
+ * @arg @ref LL_SYSCFG_EXTI_PORTB
+ * @arg @ref LL_SYSCFG_EXTI_PORTC
+ * @arg @ref LL_SYSCFG_EXTI_PORTD
+ * @arg @ref LL_SYSCFG_EXTI_PORTE (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTF
+ * @arg @ref LL_SYSCFG_EXTI_PORTG (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTH (*)
+ *
+ * (*) value not defined in all devices.
+ * @param Line This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_LINE0
+ * @arg @ref LL_SYSCFG_EXTI_LINE1
+ * @arg @ref LL_SYSCFG_EXTI_LINE2
+ * @arg @ref LL_SYSCFG_EXTI_LINE3
+ * @arg @ref LL_SYSCFG_EXTI_LINE4
+ * @arg @ref LL_SYSCFG_EXTI_LINE5
+ * @arg @ref LL_SYSCFG_EXTI_LINE6
+ * @arg @ref LL_SYSCFG_EXTI_LINE7
+ * @arg @ref LL_SYSCFG_EXTI_LINE8
+ * @arg @ref LL_SYSCFG_EXTI_LINE9
+ * @arg @ref LL_SYSCFG_EXTI_LINE10
+ * @arg @ref LL_SYSCFG_EXTI_LINE11
+ * @arg @ref LL_SYSCFG_EXTI_LINE12
+ * @arg @ref LL_SYSCFG_EXTI_LINE13
+ * @arg @ref LL_SYSCFG_EXTI_LINE14
+ * @arg @ref LL_SYSCFG_EXTI_LINE15
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
+{
+ MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16U), Port << POSITION_VAL((Line >> 16U)));
+}
+
+/**
+ * @brief Get the configured defined for specific EXTI Line
+ * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI4 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI5 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI6 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI7 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI8 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI9 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI10 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI11 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI12 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI13 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI14 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI15 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI0 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI1 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI2 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI3 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI8 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI9 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI10 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI11 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI12 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI13 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI14 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI15 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI0 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI1 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI2 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI3 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI4 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI5 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI6 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI7 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI12 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI13 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI14 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI15 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI0 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI1 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI2 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI3 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI4 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI5 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI6 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI7 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI8 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI9 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI10 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI11 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_GetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_GetEXTISource
+ * @param Line This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_LINE0
+ * @arg @ref LL_SYSCFG_EXTI_LINE1
+ * @arg @ref LL_SYSCFG_EXTI_LINE2
+ * @arg @ref LL_SYSCFG_EXTI_LINE3
+ * @arg @ref LL_SYSCFG_EXTI_LINE4
+ * @arg @ref LL_SYSCFG_EXTI_LINE5
+ * @arg @ref LL_SYSCFG_EXTI_LINE6
+ * @arg @ref LL_SYSCFG_EXTI_LINE7
+ * @arg @ref LL_SYSCFG_EXTI_LINE8
+ * @arg @ref LL_SYSCFG_EXTI_LINE9
+ * @arg @ref LL_SYSCFG_EXTI_LINE10
+ * @arg @ref LL_SYSCFG_EXTI_LINE11
+ * @arg @ref LL_SYSCFG_EXTI_LINE12
+ * @arg @ref LL_SYSCFG_EXTI_LINE13
+ * @arg @ref LL_SYSCFG_EXTI_LINE14
+ * @arg @ref LL_SYSCFG_EXTI_LINE15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_PORTA
+ * @arg @ref LL_SYSCFG_EXTI_PORTB
+ * @arg @ref LL_SYSCFG_EXTI_PORTC
+ * @arg @ref LL_SYSCFG_EXTI_PORTD
+ * @arg @ref LL_SYSCFG_EXTI_PORTE (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTF
+ * @arg @ref LL_SYSCFG_EXTI_PORTG (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTH (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (Line >> 16U)) >> POSITION_VAL(Line >> 16U));
+}
+
+/**
+ * @brief Set connections to TIMx Break inputs
+ * @rmtoll SYSCFG_CFGR2 LOCKUP_LOCK LL_SYSCFG_SetTIMBreakInputs\n
+ * SYSCFG_CFGR2 SRAM_PARITY_LOCK LL_SYSCFG_SetTIMBreakInputs\n
+ * SYSCFG_CFGR2 PVD_LOCK LL_SYSCFG_SetTIMBreakInputs
+ * @param Break This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*)
+ * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY (*)
+ * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
+{
+ MODIFY_REG(SYSCFG->CFGR2, SYSCFG_MASK_TIM_BREAK, Break);
+}
+
+/**
+ * @brief Get connections to TIMx Break inputs
+ * @rmtoll SYSCFG_CFGR2 LOCKUP_LOCK LL_SYSCFG_GetTIMBreakInputs\n
+ * SYSCFG_CFGR2 SRAM_PARITY_LOCK LL_SYSCFG_GetTIMBreakInputs\n
+ * SYSCFG_CFGR2 PVD_LOCK LL_SYSCFG_GetTIMBreakInputs
+ * @retval Returned value can be can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*)
+ * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY (*)
+ * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_MASK_TIM_BREAK));
+}
+
+#if defined(SYSCFG_CFGR2_BYP_ADDR_PAR)
+/**
+ * @brief Disable RAM Parity Check Disable
+ * @rmtoll SYSCFG_CFGR2 BYP_ADDR_PAR LL_SYSCFG_DisableSRAMParityCheck
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableSRAMParityCheck(void)
+{
+ SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_BYP_ADDR_PAR);
+}
+#endif /* SYSCFG_CFGR2_BYP_ADDR_PAR */
+
+#if defined(SYSCFG_CFGR2_SRAM_PE)
+/**
+ * @brief Check if SRAM parity error detected
+ * @rmtoll SYSCFG_CFGR2 SRAM_PE LL_SYSCFG_IsActiveFlag_SP
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void)
+{
+ return (READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SRAM_PE) == (SYSCFG_CFGR2_SRAM_PE));
+}
+
+/**
+ * @brief Clear SRAM parity error flag
+ * @rmtoll SYSCFG_CFGR2 SRAM_PE LL_SYSCFG_ClearFlag_SP
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void)
+{
+ SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SRAM_PE);
+}
+#endif /* SYSCFG_CFGR2_SRAM_PE */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/**
+ * @brief Enable CCM SRAM page write protection
+ * @note Write protection is cleared only by a system reset
+ * @rmtoll SYSCFG_RCR PAGE0 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE1 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE2 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE3 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE4 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE5 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE6 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE7 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE8 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE9 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE10 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE11 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE12 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE13 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE14 LL_SYSCFG_EnableCCM_SRAMPageWRP\n
+ * SYSCFG_RCR PAGE15 LL_SYSCFG_EnableCCM_SRAMPageWRP
+ * @param PageWRP This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE0
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE1
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE2
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE3
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE4 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE5 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE6 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE7 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE8 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE9 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE10 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE11 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE12 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE13 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE14 (*)
+ * @arg @ref LL_SYSCFG_CCMSRAMWRP_PAGE15 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableCCM_SRAMPageWRP(uint32_t PageWRP)
+{
+ SET_BIT(SYSCFG->RCR, PageWRP);
+}
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
+ * @{
+ */
+
+/**
+ * @brief Return the device identifier
+ * @note For STM32F303xC, STM32F358xx and STM32F302xC devices, the device ID is 0x422
+ * @note For STM32F373xx and STM32F378xx devices, the device ID is 0x432
+ * @note For STM32F303x8, STM32F334xx and STM32F328xx devices, the device ID is 0x438.
+ * @note For STM32F302x8, STM32F301x8 and STM32F318xx devices, the device ID is 0x439
+ * @note For STM32F303xE, STM32F398xx and STM32F302xE devices, the device ID is 0x446
+ * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
+ * @retval Values between Min_Data=0x00 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
+}
+
+/**
+ * @brief Return the device revision identifier
+ * @note This field indicates the revision of the device.
+ * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
+ * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Set Trace pin assignment control
+ * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
+ * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
+ * @param PinAssignment This parameter can be one of the following values:
+ * @arg @ref LL_DBGMCU_TRACE_NONE
+ * @arg @ref LL_DBGMCU_TRACE_ASYNCH
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
+{
+ MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
+}
+
+/**
+ * @brief Get Trace pin assignment control
+ * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
+ * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DBGMCU_TRACE_NONE
+ * @arg @ref LL_DBGMCU_TRACE_ASYNCH
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
+ * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
+}
+
+/**
+ * @brief Freeze APB1 peripherals (group1 peripherals)
+ * @rmtoll APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_TIM18_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * APB1_FZ DBG_CAN_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM18_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
+{
+ SET_BIT(DBGMCU->APB1FZ, Periphs);
+}
+
+/**
+ * @brief Unfreeze APB1 peripherals (group1 peripherals)
+ * @rmtoll APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_TIM18_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * APB1_FZ DBG_CAN_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM18_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
+{
+ CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
+}
+
+/**
+ * @brief Freeze APB2 peripherals
+ * @rmtoll APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_TIM19_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_TIM20_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
+ * APB2_FZ DBG_HRTIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM19_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM20_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM1_STOP (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
+{
+ SET_BIT(DBGMCU->APB2FZ, Periphs);
+}
+
+/**
+ * @brief Unfreeze APB2 peripherals
+ * @rmtoll APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_TIM19_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_TIM20_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
+ * APB2_FZ DBG_HRTIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM19_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_TIM20_STOP (*)
+ * @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM1_STOP (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
+{
+ CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EF_FLASH FLASH
+ * @{
+ */
+
+/**
+ * @brief Set FLASH Latency
+ * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
+ * @param Latency This parameter can be one of the following values:
+ * @arg @ref LL_FLASH_LATENCY_0
+ * @arg @ref LL_FLASH_LATENCY_1
+ * @arg @ref LL_FLASH_LATENCY_2
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
+{
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
+}
+
+/**
+ * @brief Get FLASH Latency
+ * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_FLASH_LATENCY_0
+ * @arg @ref LL_FLASH_LATENCY_1
+ * @arg @ref LL_FLASH_LATENCY_2
+ */
+__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
+{
+ return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
+}
+
+/**
+ * @brief Enable Prefetch
+ * @rmtoll FLASH_ACR PRFTBE LL_FLASH_EnablePrefetch
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
+{
+ SET_BIT(FLASH->ACR, FLASH_ACR_PRFTBE );
+}
+
+/**
+ * @brief Disable Prefetch
+ * @rmtoll FLASH_ACR PRFTBE LL_FLASH_DisablePrefetch
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
+{
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTBE );
+}
+
+/**
+ * @brief Check if Prefetch buffer is enabled
+ * @rmtoll FLASH_ACR PRFTBS LL_FLASH_IsPrefetchEnabled
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
+{
+ return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTBS) == (FLASH_ACR_PRFTBS));
+}
+
+#if defined(FLASH_ACR_HLFCYA)
+/**
+ * @brief Enable Flash Half Cycle Access
+ * @rmtoll FLASH_ACR HLFCYA LL_FLASH_EnableHalfCycleAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_EnableHalfCycleAccess(void)
+{
+ SET_BIT(FLASH->ACR, FLASH_ACR_HLFCYA);
+}
+
+/**
+ * @brief Disable Flash Half Cycle Access
+ * @rmtoll FLASH_ACR HLFCYA LL_FLASH_DisableHalfCycleAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_DisableHalfCycleAccess(void)
+{
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_HLFCYA);
+}
+
+/**
+ * @brief Check if Flash Half Cycle Access is enabled or not
+ * @rmtoll FLASH_ACR HLFCYA LL_FLASH_IsHalfCycleAccessEnabled
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_FLASH_IsHalfCycleAccessEnabled(void)
+{
+ return (READ_BIT(FLASH->ACR, FLASH_ACR_HLFCYA) == (FLASH_ACR_HLFCYA));
+}
+#endif /* FLASH_ACR_HLFCYA */
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_SYSTEM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_usart.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_usart.h
new file mode 100644
index 00000000..a03334cf
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_usart.h
@@ -0,0 +1,3645 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_usart.h
+ * @author MCD Application Team
+ * @brief Header file of USART LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_USART_H
+#define __STM32F3xx_LL_USART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5)
+
+/** @defgroup USART_LL USART
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_LL_Private_Constants USART Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_Private_Macros USART Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_ES_INIT USART Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/
+
+ uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_LL_EC_DATAWIDTH.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_LL_EC_STOPBITS.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_LL_EC_PARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/
+
+ uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_DIRECTION.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_HWCONTROL.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/
+
+ uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8.
+ This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/
+
+} LL_USART_InitTypeDef;
+
+/**
+ * @brief LL USART Clock Init Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_CLOCK.
+
+ USART HW configuration can be modified afterwards using unitary functions
+ @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput().
+ For more details, refer to description of this function. */
+
+ uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_LL_EC_POLARITY.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity().
+ For more details, refer to description of this function. */
+
+ uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_LL_EC_PHASE.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase().
+ For more details, refer to description of this function. */
+
+ uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput().
+ For more details, refer to description of this function. */
+
+} LL_USART_ClockInitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_LL_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_USART_WriteReg function
+ * @{
+ */
+#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */
+#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */
+#define LL_USART_ICR_NCF USART_ICR_NCF /*!< Noise detected flag */
+#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */
+#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */
+#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */
+#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection flag */
+#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */
+#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout flag */
+#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block flag */
+#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */
+#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_USART_ReadReg function
+ * @{
+ */
+#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */
+#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */
+#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */
+#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */
+#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */
+#define LL_USART_ISR_RXNE USART_ISR_RXNE /*!< Read data register not empty flag */
+#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */
+#define LL_USART_ISR_TXE USART_ISR_TXE /*!< Transmit data register empty flag */
+#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */
+#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */
+#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */
+#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */
+#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */
+#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */
+#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */
+#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */
+#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */
+#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */
+#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */
+#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */
+#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */
+#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions
+ * @{
+ */
+#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */
+#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */
+#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */
+#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */
+#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */
+#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */
+#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */
+#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */
+#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */
+#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */
+#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */
+#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DIRECTION Communication Direction
+ * @{
+ */
+#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */
+#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */
+#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */
+#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_PARITY Parity Control
+ * @{
+ */
+#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */
+#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */
+#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_WAKEUP Wakeup
+ * @{
+ */
+#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */
+#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DATAWIDTH Datawidth
+ * @{
+ */
+#if defined(USART_7BITS_SUPPORT)
+#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
+#else
+#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling
+ * @{
+ */
+#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */
+#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_EC_CLOCK Clock Signal
+ * @{
+ */
+
+#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */
+#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse
+ * @{
+ */
+#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */
+#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_PHASE Clock Phase
+ * @{
+ */
+#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */
+#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_POLARITY Clock Polarity
+ * @{
+ */
+#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/
+#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_STOPBITS Stop Bits
+ * @{
+ */
+#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */
+#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */
+#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */
+#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap
+ * @{
+ */
+#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */
+#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion
+ * @{
+ */
+#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */
+#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion
+ * @{
+ */
+#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */
+#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion
+ * @{
+ */
+#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */
+#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_BITORDER Bit Order
+ * @{
+ */
+#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */
+#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection
+ * @{
+ */
+#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */
+#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */
+#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */
+#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection
+ * @{
+ */
+#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */
+#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_HWCONTROL Hardware Control
+ * @{
+ */
+#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */
+#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */
+#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */
+#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation
+ * @{
+ */
+#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */
+#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */
+#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power
+ * @{
+ */
+#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */
+#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length
+ * @{
+ */
+#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */
+#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity
+ * @{
+ */
+#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */
+#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data
+ * @{
+ */
+#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
+#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_LL_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in USART register
+ * @param __INSTANCE__ USART Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in USART register
+ * @param __INSTANCE__ USART Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper
+ * @{
+ */
+
+/**
+ * @brief Compute USARTDIV value according to Peripheral Clock and
+ * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned)
+ * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance
+ * @param __BAUDRATE__ Baud rate value to achieve
+ * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case
+ */
+#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2) + ((__BAUDRATE__)/2))/(__BAUDRATE__))
+
+/**
+ * @brief Compute USARTDIV value according to Peripheral Clock and
+ * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned)
+ * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance
+ * @param __BAUDRATE__ Baud rate value to achieve
+ * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case
+ */
+#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__) + ((__BAUDRATE__)/2))/(__BAUDRATE__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup USART_LL_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @defgroup USART_LL_EF_Configuration Configuration functions
+ * @{
+ */
+
+/**
+ * @brief USART Enable
+ * @rmtoll CR1 UE LL_USART_Enable
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_UE);
+}
+
+/**
+ * @brief USART Disable (all USART prescalers and outputs are disabled)
+ * @note When USART is disabled, USART prescalers and outputs are stopped immediately,
+ * and current operations are discarded. The configuration of the USART is kept, but all the status
+ * flags, in the USARTx_ISR are set to their default values.
+ * @rmtoll CR1 UE LL_USART_Disable
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_UE);
+}
+
+/**
+ * @brief Indicate if USART is enabled
+ * @rmtoll CR1 UE LL_USART_IsEnabled
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE));
+}
+
+/**
+ * @brief USART enabled in STOP Mode.
+ * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that
+ * USART clock selection is HSI or LSE in RCC.
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR1 UESM LL_USART_EnableInStopMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_UESM);
+}
+
+/**
+ * @brief USART disabled in STOP Mode.
+ * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR1 UESM LL_USART_DisableInStopMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
+}
+
+/**
+ * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not)
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM));
+}
+
+/**
+ * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit)
+ * @rmtoll CR1 RE LL_USART_EnableDirectionRx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RE);
+}
+
+/**
+ * @brief Receiver Disable
+ * @rmtoll CR1 RE LL_USART_DisableDirectionRx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
+}
+
+/**
+ * @brief Transmitter Enable
+ * @rmtoll CR1 TE LL_USART_EnableDirectionTx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TE);
+}
+
+/**
+ * @brief Transmitter Disable
+ * @rmtoll CR1 TE LL_USART_DisableDirectionTx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
+}
+
+/**
+ * @brief Configure simultaneously enabled/disabled states
+ * of Transmitter and Receiver
+ * @rmtoll CR1 RE LL_USART_SetTransferDirection\n
+ * CR1 TE LL_USART_SetTransferDirection
+ * @param USARTx USART Instance
+ * @param TransferDirection This parameter can be one of the following values:
+ * @arg @ref LL_USART_DIRECTION_NONE
+ * @arg @ref LL_USART_DIRECTION_RX
+ * @arg @ref LL_USART_DIRECTION_TX
+ * @arg @ref LL_USART_DIRECTION_TX_RX
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+}
+
+/**
+ * @brief Return enabled/disabled states of Transmitter and Receiver
+ * @rmtoll CR1 RE LL_USART_GetTransferDirection\n
+ * CR1 TE LL_USART_GetTransferDirection
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DIRECTION_NONE
+ * @arg @ref LL_USART_DIRECTION_RX
+ * @arg @ref LL_USART_DIRECTION_TX
+ * @arg @ref LL_USART_DIRECTION_TX_RX
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE));
+}
+
+/**
+ * @brief Configure Parity (enabled/disabled and parity mode if enabled).
+ * @note This function selects if hardware parity control (generation and detection) is enabled or disabled.
+ * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position
+ * (9th or 8th bit depending on data width) and parity is checked on the received data.
+ * @rmtoll CR1 PS LL_USART_SetParity\n
+ * CR1 PCE LL_USART_SetParity
+ * @param USARTx USART Instance
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity);
+}
+
+/**
+ * @brief Return Parity configuration (enabled/disabled and parity mode if enabled)
+ * @rmtoll CR1 PS LL_USART_GetParity\n
+ * CR1 PCE LL_USART_GetParity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ */
+__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE));
+}
+
+/**
+ * @brief Set Receiver Wake Up method from Mute mode.
+ * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod
+ * @param USARTx USART Instance
+ * @param Method This parameter can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_IDLELINE
+ * @arg @ref LL_USART_WAKEUP_ADDRESSMARK
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method);
+}
+
+/**
+ * @brief Return Receiver Wake Up method from Mute mode
+ * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_IDLELINE
+ * @arg @ref LL_USART_WAKEUP_ADDRESSMARK
+ */
+__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE));
+}
+
+/**
+ * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits)
+ * @rmtoll CR1 M0 LL_USART_SetDataWidth\n
+ * CR1 M1 LL_USART_SetDataWidth
+ * @param USARTx USART Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B (*)
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ *
+ * (*) Values not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth);
+}
+
+/**
+ * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits)
+ * @rmtoll CR1 M0 LL_USART_GetDataWidth\n
+ * CR1 M1 LL_USART_GetDataWidth
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B (*)
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ *
+ * (*) Values not available on all devices
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M));
+}
+
+/**
+ * @brief Allow switch between Mute Mode and Active mode
+ * @rmtoll CR1 MME LL_USART_EnableMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_MME);
+}
+
+/**
+ * @brief Prevent Mute Mode use. Set Receiver in active mode permanently.
+ * @rmtoll CR1 MME LL_USART_DisableMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
+}
+
+/**
+ * @brief Indicate if switch between Mute Mode and Active mode is allowed
+ * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME));
+}
+
+/**
+ * @brief Set Oversampling to 8-bit or 16-bit mode
+ * @rmtoll CR1 OVER8 LL_USART_SetOverSampling
+ * @param USARTx USART Instance
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling);
+}
+
+/**
+ * @brief Return Oversampling mode
+ * @rmtoll CR1 OVER8 LL_USART_GetOverSampling
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ */
+__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8));
+}
+
+/**
+ * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput
+ * @param USARTx USART Instance
+ * @param LastBitClockPulse This parameter can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse);
+}
+
+/**
+ * @brief Retrieve Clock pulse of the last data bit output configuration
+ * (Last bit Clock pulse output to the SCLK pin or not)
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ */
+__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL));
+}
+
+/**
+ * @brief Select the phase of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPHA LL_USART_SetClockPhase
+ * @param USARTx USART Instance
+ * @param ClockPhase This parameter can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase);
+}
+
+/**
+ * @brief Return phase of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPHA LL_USART_GetClockPhase
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA));
+}
+
+/**
+ * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPOL LL_USART_SetClockPolarity
+ * @param USARTx USART Instance
+ * @param ClockPolarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity);
+}
+
+/**
+ * @brief Return polarity of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPOL LL_USART_GetClockPolarity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL));
+}
+
+/**
+ * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse)
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function
+ * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function
+ * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function
+ * @rmtoll CR2 CPHA LL_USART_ConfigClock\n
+ * CR2 CPOL LL_USART_ConfigClock\n
+ * CR2 LBCL LL_USART_ConfigClock
+ * @param USARTx USART Instance
+ * @param Phase This parameter can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ * @param LBCPOutput This parameter can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput);
+}
+
+/**
+ * @brief Enable Clock output on SCLK pin
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Disable Clock output on SCLK pin
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Indicate if Clock output on SCLK pin is enabled
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN));
+}
+
+/**
+ * @brief Set the length of the stop bits
+ * @rmtoll CR2 STOP LL_USART_SetStopBitsLength
+ * @param USARTx USART Instance
+ * @param StopBits This parameter can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5
+ * @arg @ref LL_USART_STOPBITS_2
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits);
+}
+
+/**
+ * @brief Retrieve the length of the stop bits
+ * @rmtoll CR2 STOP LL_USART_GetStopBitsLength
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5
+ * @arg @ref LL_USART_STOPBITS_2
+ */
+__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP));
+}
+
+/**
+ * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits)
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Data Width configuration using @ref LL_USART_SetDataWidth() function
+ * - Parity Control and mode configuration using @ref LL_USART_SetParity() function
+ * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function
+ * @rmtoll CR1 PS LL_USART_ConfigCharacter\n
+ * CR1 PCE LL_USART_ConfigCharacter\n
+ * CR1 M0 LL_USART_ConfigCharacter\n
+ * CR1 M1 LL_USART_ConfigCharacter\n
+ * CR2 STOP LL_USART_ConfigCharacter
+ * @param USARTx USART Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B (*)
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ * @param StopBits This parameter can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5
+ * @arg @ref LL_USART_STOPBITS_2
+ *
+ * (*) Values not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity,
+ uint32_t StopBits)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth);
+ MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits);
+}
+
+/**
+ * @brief Configure TX/RX pins swapping setting.
+ * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap
+ * @param USARTx USART Instance
+ * @param SwapConfig This parameter can be one of the following values:
+ * @arg @ref LL_USART_TXRX_STANDARD
+ * @arg @ref LL_USART_TXRX_SWAPPED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig);
+}
+
+/**
+ * @brief Retrieve TX/RX pins swapping configuration.
+ * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_TXRX_STANDARD
+ * @arg @ref LL_USART_TXRX_SWAPPED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP));
+}
+
+/**
+ * @brief Configure RX pin active level logic
+ * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel
+ * @param USARTx USART Instance
+ * @param PinInvMethod This parameter can be one of the following values:
+ * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod);
+}
+
+/**
+ * @brief Retrieve RX pin active level logic configuration
+ * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV));
+}
+
+/**
+ * @brief Configure TX pin active level logic
+ * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel
+ * @param USARTx USART Instance
+ * @param PinInvMethod This parameter can be one of the following values:
+ * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod);
+}
+
+/**
+ * @brief Retrieve TX pin active level logic configuration
+ * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV));
+}
+
+/**
+ * @brief Configure Binary data logic.
+ * @note Allow to define how Logical data from the data register are send/received :
+ * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H)
+ * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic
+ * @param USARTx USART Instance
+ * @param DataLogic This parameter can be one of the following values:
+ * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE
+ * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic);
+}
+
+/**
+ * @brief Retrieve Binary data configuration
+ * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE
+ * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV));
+}
+
+/**
+ * @brief Configure transfer bit order (either Less or Most Significant Bit First)
+ * @note MSB First means data is transmitted/received with the MSB first, following the start bit.
+ * LSB First means data is transmitted/received with data bit 0 first, following the start bit.
+ * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder
+ * @param USARTx USART Instance
+ * @param BitOrder This parameter can be one of the following values:
+ * @arg @ref LL_USART_BITORDER_LSBFIRST
+ * @arg @ref LL_USART_BITORDER_MSBFIRST
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder);
+}
+
+/**
+ * @brief Return transfer bit order (either Less or Most Significant Bit First)
+ * @note MSB First means data is transmitted/received with the MSB first, following the start bit.
+ * LSB First means data is transmitted/received with data bit 0 first, following the start bit.
+ * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_BITORDER_LSBFIRST
+ * @arg @ref LL_USART_BITORDER_MSBFIRST
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST));
+}
+
+/**
+ * @brief Enable Auto Baud-Rate Detection
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_ABREN);
+}
+
+/**
+ * @brief Disable Auto Baud-Rate Detection
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN);
+}
+
+/**
+ * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN));
+}
+
+/**
+ * @brief Set Auto Baud-Rate mode bits
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode
+ * @param USARTx USART Instance
+ * @param AutoBaudRateMode This parameter can be one of the following values:
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode);
+}
+
+/**
+ * @brief Return Auto Baud-Rate mode
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME
+ */
+__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE));
+}
+
+/**
+ * @brief Enable Receiver Timeout
+ * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_RTOEN);
+}
+
+/**
+ * @brief Disable Receiver Timeout
+ * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN);
+}
+
+/**
+ * @brief Indicate if Receiver Timeout feature is enabled
+ * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN));
+}
+
+/**
+ * @brief Set Address of the USART node.
+ * @note This is used in multiprocessor communication during Mute mode or Stop mode,
+ * for wake up with address mark detection.
+ * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7.
+ * (b7-b4 should be set to 0)
+ * 8bits address node is used when 7-bit Address Detection is selected in ADDM7.
+ * (This is used in multiprocessor communication during Mute mode or Stop mode,
+ * for wake up with 7-bit address mark detection.
+ * The MSB of the character sent by the transmitter should be equal to 1.
+ * It may also be used for character detection during normal reception,
+ * Mute mode inactive (for example, end of block detection in ModBus protocol).
+ * In this case, the whole received character (8-bit) is compared to the ADD[7:0]
+ * value and CMF flag is set on match)
+ * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n
+ * CR2 ADDM7 LL_USART_ConfigNodeAddress
+ * @param USARTx USART Instance
+ * @param AddressLen This parameter can be one of the following values:
+ * @arg @ref LL_USART_ADDRESS_DETECT_4B
+ * @arg @ref LL_USART_ADDRESS_DETECT_7B
+ * @param NodeAddress 4 or 7 bit Address of the USART node.
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7,
+ (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos)));
+}
+
+/**
+ * @brief Return 8 bit Address of the USART node as set in ADD field of CR2.
+ * @note If 4-bit Address Detection is selected in ADDM7,
+ * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant)
+ * If 7-bit Address Detection is selected in ADDM7,
+ * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant)
+ * @rmtoll CR2 ADD LL_USART_GetNodeAddress
+ * @param USARTx USART Instance
+ * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos);
+}
+
+/**
+ * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit)
+ * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_ADDRESS_DETECT_4B
+ * @arg @ref LL_USART_ADDRESS_DETECT_7B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7));
+}
+
+/**
+ * @brief Enable RTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_RTSE);
+}
+
+/**
+ * @brief Disable RTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE);
+}
+
+/**
+ * @brief Enable CTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_CTSE);
+}
+
+/**
+ * @brief Disable CTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE);
+}
+
+/**
+ * @brief Configure HW Flow Control mode (both CTS and RTS)
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n
+ * CR3 CTSE LL_USART_SetHWFlowCtrl
+ * @param USARTx USART Instance
+ * @param HardwareFlowControl This parameter can be one of the following values:
+ * @arg @ref LL_USART_HWCONTROL_NONE
+ * @arg @ref LL_USART_HWCONTROL_RTS
+ * @arg @ref LL_USART_HWCONTROL_CTS
+ * @arg @ref LL_USART_HWCONTROL_RTS_CTS
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl);
+}
+
+/**
+ * @brief Return HW Flow Control configuration (both CTS and RTS)
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n
+ * CR3 CTSE LL_USART_GetHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_HWCONTROL_NONE
+ * @arg @ref LL_USART_HWCONTROL_RTS
+ * @arg @ref LL_USART_HWCONTROL_CTS
+ * @arg @ref LL_USART_HWCONTROL_RTS_CTS
+ */
+__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE));
+}
+
+/**
+ * @brief Enable One bit sampling method
+ * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_ONEBIT);
+}
+
+/**
+ * @brief Disable One bit sampling method
+ * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT);
+}
+
+/**
+ * @brief Indicate if One bit sampling method is enabled
+ * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT));
+}
+
+/**
+ * @brief Enable Overrun detection
+ * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Disable Overrun detection
+ * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Indicate if Overrun detection is enabled
+ * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits)
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUS LL_USART_SetWKUPType
+ * @param USARTx USART Instance
+ * @param Type This parameter can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_ON_ADDRESS
+ * @arg @ref LL_USART_WAKEUP_ON_STARTBIT
+ * @arg @ref LL_USART_WAKEUP_ON_RXNE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type);
+}
+
+/**
+ * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits)
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUS LL_USART_GetWKUPType
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_ON_ADDRESS
+ * @arg @ref LL_USART_WAKEUP_ON_STARTBIT
+ * @arg @ref LL_USART_WAKEUP_ON_RXNE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetWKUPType(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS));
+}
+
+/**
+ * @brief Configure USART BRR register for achieving expected Baud Rate value.
+ * @note Compute and set USARTDIV value in BRR Register (full BRR content)
+ * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values
+ * @note Peripheral clock and Baud rate values provided as function parameters should be valid
+ * (Baud rate value != 0)
+ * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d.
+ * @rmtoll BRR BRR LL_USART_SetBaudRate
+ * @param USARTx USART Instance
+ * @param PeriphClk Peripheral Clock
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @param BaudRate Baud Rate
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling,
+ uint32_t BaudRate)
+{
+ register uint32_t usartdiv = 0x0U;
+ register uint32_t brrtemp = 0x0U;
+
+ if (OverSampling == LL_USART_OVERSAMPLING_8)
+ {
+ usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate));
+ brrtemp = usartdiv & 0xFFF0U;
+ brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U);
+ USARTx->BRR = brrtemp;
+ }
+ else
+ {
+ USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate));
+ }
+}
+
+/**
+ * @brief Return current Baud Rate value, according to USARTDIV present in BRR register
+ * (full BRR content), and to used Peripheral Clock and Oversampling mode values
+ * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned.
+ * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d.
+ * @rmtoll BRR BRR LL_USART_GetBaudRate
+ * @param USARTx USART Instance
+ * @param PeriphClk Peripheral Clock
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @retval Baud Rate
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling)
+{
+ register uint32_t usartdiv = 0x0U;
+ register uint32_t brrresult = 0x0U;
+
+ usartdiv = USARTx->BRR;
+
+ if (OverSampling == LL_USART_OVERSAMPLING_8)
+ {
+ if ((usartdiv & 0xFFF7U) != 0U)
+ {
+ usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ;
+ brrresult = (PeriphClk * 2U) / usartdiv;
+ }
+ }
+ else
+ {
+ if ((usartdiv & 0xFFFFU) != 0U)
+ {
+ brrresult = PeriphClk / usartdiv;
+ }
+ }
+ return (brrresult);
+}
+
+/**
+ * @brief Set Receiver Time Out Value (expressed in nb of bits duration)
+ * @rmtoll RTOR RTO LL_USART_SetRxTimeout
+ * @param USARTx USART Instance
+ * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout)
+{
+ MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout);
+}
+
+/**
+ * @brief Get Receiver Time Out Value (expressed in nb of bits duration)
+ * @rmtoll RTOR RTO LL_USART_GetRxTimeout
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF
+ */
+__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO));
+}
+
+/**
+ * @brief Set Block Length value in reception
+ * @rmtoll RTOR BLEN LL_USART_SetBlockLength
+ * @param USARTx USART Instance
+ * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength)
+{
+ MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos);
+}
+
+/**
+ * @brief Get Block Length value in reception
+ * @rmtoll RTOR BLEN LL_USART_GetBlockLength
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBlockLength(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature
+ * @{
+ */
+
+/**
+ * @brief Enable IrDA mode
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_EnableIrda
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Disable IrDA mode
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_DisableIrda
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Indicate if IrDA mode is enabled
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_IsEnabledIrda
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN));
+}
+
+/**
+ * @brief Configure IrDA Power Mode (Normal or Low Power)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode
+ * @param USARTx USART Instance
+ * @param PowerMode This parameter can be one of the following values:
+ * @arg @ref LL_USART_IRDA_POWER_NORMAL
+ * @arg @ref LL_USART_IRDA_POWER_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode);
+}
+
+/**
+ * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_IRDA_POWER_NORMAL
+ * @arg @ref LL_USART_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP));
+}
+
+/**
+ * @brief Set Irda prescaler value, used for dividing the USART clock source
+ * to achieve the Irda Low Power frequency (8 bits value)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler
+ * @param USARTx USART Instance
+ * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
+{
+ MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue);
+}
+
+/**
+ * @brief Return Irda prescaler value, used for dividing the USART clock source
+ * to achieve the Irda Low Power frequency (8 bits value)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler
+ * @param USARTx USART Instance
+ * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature
+ * @{
+ */
+
+/**
+ * @brief Enable Smartcard NACK transmission
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_NACK);
+}
+
+/**
+ * @brief Disable Smartcard NACK transmission
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_NACK);
+}
+
+/**
+ * @brief Indicate if Smartcard NACK transmission is enabled
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK));
+}
+
+/**
+ * @brief Enable Smartcard mode
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_EnableSmartcard
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Disable Smartcard mode
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_DisableSmartcard
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Indicate if Smartcard mode is enabled
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN));
+}
+
+/**
+ * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode.
+ * In transmission mode, it specifies the number of automatic retransmission retries, before
+ * generating a transmission error (FE bit set).
+ * In reception mode, it specifies the number or erroneous reception trials, before generating a
+ * reception error (RXNE and PE bits set)
+ * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount
+ * @param USARTx USART Instance
+ * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos);
+}
+
+/**
+ * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount
+ * @param USARTx USART Instance
+ * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos);
+}
+
+/**
+ * @brief Set Smartcard prescaler value, used for dividing the USART clock
+ * source to provide the SMARTCARD Clock (5 bits value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler
+ * @param USARTx USART Instance
+ * @param PrescalerValue Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
+{
+ MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, PrescalerValue);
+}
+
+/**
+ * @brief Return Smartcard prescaler value, used for dividing the USART clock
+ * source to provide the SMARTCARD Clock (5 bits value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler
+ * @param USARTx USART Instance
+ * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC));
+}
+
+/**
+ * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods
+ * (GT[7:0] bits : Guard time value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime
+ * @param USARTx USART Instance
+ * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime)
+{
+ MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, GuardTime << USART_GTPR_GT_Pos);
+}
+
+/**
+ * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods
+ * (GT[7:0] bits : Guard time value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime
+ * @param USARTx USART Instance
+ * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature
+ * @{
+ */
+
+/**
+ * @brief Enable Single Wire Half-Duplex mode
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Disable Single Wire Half-Duplex mode
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Indicate if Single Wire Half-Duplex mode is enabled
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature
+ * @{
+ */
+
+/**
+ * @brief Set LIN Break Detection Length
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen
+ * @param USARTx USART Instance
+ * @param LINBDLength This parameter can be one of the following values:
+ * @arg @ref LL_USART_LINBREAK_DETECT_10B
+ * @arg @ref LL_USART_LINBREAK_DETECT_11B
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength);
+}
+
+/**
+ * @brief Return LIN Break Detection Length
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_LINBREAK_DETECT_10B
+ * @arg @ref LL_USART_LINBREAK_DETECT_11B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL));
+}
+
+/**
+ * @brief Enable LIN mode
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_EnableLIN
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Disable LIN mode
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_DisableLIN
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Indicate if LIN mode is enabled
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature
+ * @{
+ */
+
+/**
+ * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits).
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime
+ * @param USARTx USART Instance
+ * @param Time Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos);
+}
+
+/**
+ * @brief Return DEDT (Driver Enable De-Assertion Time)
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime
+ * @param USARTx USART Instance
+ * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos);
+}
+
+/**
+ * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits).
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime
+ * @param USARTx USART Instance
+ * @param Time Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos);
+}
+
+/**
+ * @brief Return DEAT (Driver Enable Assertion Time)
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime
+ * @param USARTx USART Instance
+ * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos);
+}
+
+/**
+ * @brief Enable Driver Enable (DE) Mode
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_EnableDEMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DEM);
+}
+
+/**
+ * @brief Disable Driver Enable (DE) Mode
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_DisableDEMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DEM);
+}
+
+/**
+ * @brief Indicate if Driver Enable (DE) Mode is enabled
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM));
+}
+
+/**
+ * @brief Select Driver Enable Polarity
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity
+ * @param USARTx USART Instance
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_DE_POLARITY_HIGH
+ * @arg @ref LL_USART_DE_POLARITY_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity);
+}
+
+/**
+ * @brief Return Driver Enable Polarity
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DE_POLARITY_HIGH
+ * @arg @ref LL_USART_DE_POLARITY_LOW
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services
+ * @{
+ */
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART)
+ * @note In UART mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * @note Other remaining configurations items related to Asynchronous Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n
+ * CR2 CLKEN LL_USART_ConfigAsyncMode\n
+ * CR3 SCEN LL_USART_ConfigAsyncMode\n
+ * CR3 IREN LL_USART_ConfigAsyncMode\n
+ * CR3 HDSEL LL_USART_ConfigAsyncMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx)
+{
+ /* In Asynchronous mode, the following bits must be kept cleared:
+ - LINEN, CLKEN bits in the USART_CR2 register,
+ - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Synchronous Mode
+ * @note In Synchronous mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also sets the USART in Synchronous mode.
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function
+ * @note Other remaining configurations items related to Synchronous Mode
+ * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n
+ * CR2 CLKEN LL_USART_ConfigSyncMode\n
+ * CR3 SCEN LL_USART_ConfigSyncMode\n
+ * CR3 IREN LL_USART_ConfigSyncMode\n
+ * CR3 HDSEL LL_USART_ConfigSyncMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx)
+{
+ /* In Synchronous mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register,
+ - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
+ /* set the UART/USART in Synchronous mode */
+ SET_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in LIN Mode
+ * @note In LIN mode, the following bits must be kept cleared:
+ * - STOP and CLKEN bits in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also set the UART/USART in LIN mode.
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function
+ * @note Other remaining configurations items related to LIN Mode
+ * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n
+ * CR2 STOP LL_USART_ConfigLINMode\n
+ * CR2 LINEN LL_USART_ConfigLINMode\n
+ * CR3 IREN LL_USART_ConfigLINMode\n
+ * CR3 SCEN LL_USART_ConfigLINMode\n
+ * CR3 HDSEL LL_USART_ConfigLINMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx)
+{
+ /* In LIN mode, the following bits must be kept cleared:
+ - STOP and CLKEN bits in the USART_CR2 register,
+ - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL));
+ /* Set the UART/USART in LIN mode */
+ SET_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode
+ * @note In Half Duplex mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * This function also sets the UART/USART in Half Duplex mode.
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function
+ * @note Other remaining configurations items related to Half Duplex Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n
+ * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n
+ * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n
+ * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n
+ * CR3 IREN LL_USART_ConfigHalfDuplexMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx)
+{
+ /* In Half Duplex mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN));
+ /* set the UART/USART in Half Duplex mode */
+ SET_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Smartcard Mode
+ * @note In Smartcard mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also configures Stop bits to 1.5 bits and
+ * sets the USART in Smartcard mode (SCEN bit).
+ * Clock Output is also enabled (CLKEN).
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function
+ * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function
+ * @note Other remaining configurations items related to Smartcard Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n
+ * CR2 STOP LL_USART_ConfigSmartcardMode\n
+ * CR2 CLKEN LL_USART_ConfigSmartcardMode\n
+ * CR3 HDSEL LL_USART_ConfigSmartcardMode\n
+ * CR3 SCEN LL_USART_ConfigSmartcardMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx)
+{
+ /* In Smartcard mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register,
+ - IREN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+ /* Configure Stop bits to 1.5 bits */
+ /* Synchronous mode is activated by default */
+ SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN));
+ /* set the UART/USART in Smartcard mode */
+ SET_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Irda Mode
+ * @note In IRDA mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - STOP and CLKEN bits in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also sets the UART/USART in IRDA mode (IREN bit).
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function
+ * @note Other remaining configurations items related to Irda Mode
+ * (as Baud Rate, Word length, Power mode, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n
+ * CR2 CLKEN LL_USART_ConfigIrdaMode\n
+ * CR2 STOP LL_USART_ConfigIrdaMode\n
+ * CR3 SCEN LL_USART_ConfigIrdaMode\n
+ * CR3 HDSEL LL_USART_ConfigIrdaMode\n
+ * CR3 IREN LL_USART_ConfigIrdaMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx)
+{
+ /* In IRDA mode, the following bits must be kept cleared:
+ - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+ - SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+ /* set the UART/USART in IRDA mode */
+ SET_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Multi processor Mode
+ * (several USARTs connected in a network, one of the USARTs can be the master,
+ * its TX output connected to the RX inputs of the other slaves USARTs).
+ * @note In MultiProcessor mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register,
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register,
+ * - IREN bit in the USART_CR3 register,
+ * - HDSEL bit in the USART_CR3 register.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * @note Other remaining configurations items related to Multi processor Mode
+ * (as Baud Rate, Wake Up Method, Node address, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n
+ * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n
+ * CR3 SCEN LL_USART_ConfigMultiProcessMode\n
+ * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n
+ * CR3 IREN LL_USART_ConfigMultiProcessMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx)
+{
+ /* In Multi Processor mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Check if the USART Parity Error Flag is set or not
+ * @rmtoll ISR PE LL_USART_IsActiveFlag_PE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE));
+}
+
+/**
+ * @brief Check if the USART Framing Error Flag is set or not
+ * @rmtoll ISR FE LL_USART_IsActiveFlag_FE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE));
+}
+
+/**
+ * @brief Check if the USART Noise error detected Flag is set or not
+ * @rmtoll ISR NF LL_USART_IsActiveFlag_NE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE));
+}
+
+/**
+ * @brief Check if the USART OverRun Error Flag is set or not
+ * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE));
+}
+
+/**
+ * @brief Check if the USART IDLE line detected Flag is set or not
+ * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE));
+}
+
+/**
+ * @brief Check if the USART Read Data Register Not Empty Flag is set or not
+ * @rmtoll ISR RXNE LL_USART_IsActiveFlag_RXNE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_RXNE) == (USART_ISR_RXNE));
+}
+
+/**
+ * @brief Check if the USART Transmission Complete Flag is set or not
+ * @rmtoll ISR TC LL_USART_IsActiveFlag_TC
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC));
+}
+
+/**
+ * @brief Check if the USART Transmit Data Register Empty Flag is set or not
+ * @rmtoll ISR TXE LL_USART_IsActiveFlag_TXE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TXE) == (USART_ISR_TXE));
+}
+
+/**
+ * @brief Check if the USART LIN Break Detection Flag is set or not
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF));
+}
+
+/**
+ * @brief Check if the USART CTS interrupt Flag is set or not
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF));
+}
+
+/**
+ * @brief Check if the USART CTS Flag is set or not
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS));
+}
+
+/**
+ * @brief Check if the USART Receiver Time Out Flag is set or not
+ * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF));
+}
+
+/**
+ * @brief Check if the USART End Of Block Flag is set or not
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF));
+}
+
+/**
+ * @brief Check if the USART Auto-Baud Rate Error Flag is set or not
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE));
+}
+
+/**
+ * @brief Check if the USART Auto-Baud Rate Flag is set or not
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF));
+}
+
+/**
+ * @brief Check if the USART Busy Flag is set or not
+ * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY));
+}
+
+/**
+ * @brief Check if the USART Character Match Flag is set or not
+ * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF));
+}
+
+/**
+ * @brief Check if the USART Send Break Flag is set or not
+ * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF));
+}
+
+/**
+ * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not
+ * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU));
+}
+
+/**
+ * @brief Check if the USART Wake Up from stop mode Flag is set or not
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF));
+}
+
+/**
+ * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not
+ * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK));
+}
+
+/**
+ * @brief Check if the USART Receive Enable Acknowledge Flag is set or not
+ * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK));
+}
+
+
+/**
+ * @brief Clear Parity Error Flag
+ * @rmtoll ICR PECF LL_USART_ClearFlag_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_PECF);
+}
+
+/**
+ * @brief Clear Framing Error Flag
+ * @rmtoll ICR FECF LL_USART_ClearFlag_FE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_FECF);
+}
+
+/**
+ * @brief Clear Noise detected Flag
+ * @rmtoll ICR NCF LL_USART_ClearFlag_NE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_NCF);
+}
+
+/**
+ * @brief Clear OverRun Error Flag
+ * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_ORECF);
+}
+
+/**
+ * @brief Clear IDLE line detected Flag
+ * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_IDLECF);
+}
+
+/**
+ * @brief Clear Transmission Complete Flag
+ * @rmtoll ICR TCCF LL_USART_ClearFlag_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_TCCF);
+}
+
+
+/**
+ * @brief Clear LIN Break Detection Flag
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_LBDCF);
+}
+
+/**
+ * @brief Clear CTS Interrupt Flag
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_CTSCF);
+}
+
+/**
+ * @brief Clear Receiver Time Out Flag
+ * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_RTOCF);
+}
+
+/**
+ * @brief Clear End Of Block Flag
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_EOBCF);
+}
+
+/**
+ * @brief Clear Character Match Flag
+ * @rmtoll ICR CMCF LL_USART_ClearFlag_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_CMCF);
+}
+
+/**
+ * @brief Clear Wake Up from stop mode Flag
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_WUCF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable IDLE Interrupt
+ * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+}
+
+/**
+ * @brief Enable RX Not Empty Interrupt
+ * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RXNEIE);
+}
+
+/**
+ * @brief Enable Transmission Complete Interrupt
+ * @rmtoll CR1 TCIE LL_USART_EnableIT_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief Enable TX Empty Interrupt
+ * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TXEIE);
+}
+
+/**
+ * @brief Enable Parity Error Interrupt
+ * @rmtoll CR1 PEIE LL_USART_EnableIT_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_PEIE);
+}
+
+/**
+ * @brief Enable Character Match Interrupt
+ * @rmtoll CR1 CMIE LL_USART_EnableIT_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_CMIE);
+}
+
+/**
+ * @brief Enable Receiver Timeout Interrupt
+ * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
+}
+
+/**
+ * @brief Enable End Of Block Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
+}
+
+/**
+ * @brief Enable LIN Break Detection Interrupt
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_LBDIE);
+}
+
+/**
+ * @brief Enable Error Interrupt
+ * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing
+ * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register).
+ * 0: Interrupt is inhibited
+ * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register.
+ * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Enable CTS Interrupt
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
+}
+
+/**
+ * @brief Enable Wake Up from Stop Mode Interrupt
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
+}
+
+
+/**
+ * @brief Disable IDLE Interrupt
+ * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+}
+
+/**
+ * @brief Disable RX Not Empty Interrupt
+ * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE);
+}
+
+/**
+ * @brief Disable Transmission Complete Interrupt
+ * @rmtoll CR1 TCIE LL_USART_DisableIT_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief Disable TX Empty Interrupt
+ * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE);
+}
+
+/**
+ * @brief Disable Parity Error Interrupt
+ * @rmtoll CR1 PEIE LL_USART_DisableIT_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
+}
+
+/**
+ * @brief Disable Character Match Interrupt
+ * @rmtoll CR1 CMIE LL_USART_DisableIT_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
+}
+
+/**
+ * @brief Disable Receiver Timeout Interrupt
+ * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
+}
+
+/**
+ * @brief Disable End Of Block Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
+}
+
+/**
+ * @brief Disable LIN Break Detection Interrupt
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE);
+}
+
+/**
+ * @brief Disable Error Interrupt
+ * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing
+ * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register).
+ * 0: Interrupt is inhibited
+ * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register.
+ * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Disable CTS Interrupt
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
+}
+
+/**
+ * @brief Disable Wake Up from Stop Mode Interrupt
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
+}
+
+
+/**
+ * @brief Check if the USART IDLE Interrupt source is enabled or disabled.
+ * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE));
+}
+
+/**
+ * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled.
+ * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE));
+}
+
+/**
+ * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled.
+ * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE));
+}
+
+/**
+ * @brief Check if the USART TX Empty Interrupt is enabled or disabled.
+ * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE));
+}
+
+/**
+ * @brief Check if the USART Parity Error Interrupt is enabled or disabled.
+ * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE));
+}
+
+/**
+ * @brief Check if the USART Character Match Interrupt is enabled or disabled.
+ * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE));
+}
+
+/**
+ * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled.
+ * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE));
+}
+
+/**
+ * @brief Check if the USART End Of Block Interrupt is enabled or disabled.
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE));
+}
+
+/**
+ * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE));
+}
+
+/**
+ * @brief Check if the USART Error Interrupt is enabled or disabled.
+ * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE));
+}
+
+/**
+ * @brief Check if the USART CTS Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE));
+}
+
+/**
+ * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_DMA_Management DMA_Management
+ * @{
+ */
+
+/**
+ * @brief Enable DMA Mode for reception
+ * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DMAR);
+}
+
+/**
+ * @brief Disable DMA Mode for reception
+ * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
+}
+
+/**
+ * @brief Check if DMA Mode is enabled for reception
+ * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR));
+}
+
+/**
+ * @brief Enable DMA Mode for transmission
+ * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DMAT);
+}
+
+/**
+ * @brief Disable DMA Mode for transmission
+ * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
+}
+
+/**
+ * @brief Check if DMA Mode is enabled for transmission
+ * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT));
+}
+
+/**
+ * @brief Enable DMA Disabling on Reception Error
+ * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DDRE);
+}
+
+/**
+ * @brief Disable DMA Disabling on Reception Error
+ * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE);
+}
+
+/**
+ * @brief Indicate if DMA Disabling on Reception Error is disabled
+ * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ return (READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE));
+}
+
+/**
+ * @brief Get the data register address used for DMA transfer
+ * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n
+ * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr
+ * @param USARTx USART Instance
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT
+ * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE
+ * @retval Address of data register
+ */
+__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t Direction)
+{
+ register uint32_t data_reg_addr = 0U;
+
+ if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT)
+ {
+ /* return address of TDR register */
+ data_reg_addr = (uint32_t) &(USARTx->TDR);
+ }
+ else
+ {
+ /* return address of RDR register */
+ data_reg_addr = (uint32_t) &(USARTx->RDR);
+ }
+
+ return data_reg_addr;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Data_Management Data_Management
+ * @{
+ */
+
+/**
+ * @brief Read Receiver Data register (Receive Data value, 8 bits)
+ * @rmtoll RDR RDR LL_USART_ReceiveData8
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx)
+{
+ return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR));
+}
+
+/**
+ * @brief Read Receiver Data register (Receive Data value, 9 bits)
+ * @rmtoll RDR RDR LL_USART_ReceiveData9
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x1FF
+ */
+__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx)
+{
+ return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR));
+}
+
+/**
+ * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits)
+ * @rmtoll TDR TDR LL_USART_TransmitData8
+ * @param USARTx USART Instance
+ * @param Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value)
+{
+ USARTx->TDR = Value;
+}
+
+/**
+ * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits)
+ * @rmtoll TDR TDR LL_USART_TransmitData9
+ * @param USARTx USART Instance
+ * @param Value between Min_Data=0x00 and Max_Data=0x1FF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value)
+{
+ USARTx->TDR = Value & 0x1FFU;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Execution Execution
+ * @{
+ */
+
+/**
+ * @brief Request an Automatic Baud Rate measurement on next received data frame
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_ABRRQ);
+}
+
+/**
+ * @brief Request Break sending
+ * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_SBKRQ);
+}
+
+/**
+ * @brief Put USART in mute mode and set the RWU flag
+ * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_MMRQ);
+}
+
+/**
+ * @brief Request a Receive Data flush
+ * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_RXFRQ);
+}
+
+/**
+ * @brief Request a Transmit data flush
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, USART_RQR_TXFRQ);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx);
+ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct);
+void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct);
+ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct);
+void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* USART1 || USART2|| USART3 || UART4 || UART5 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_utils.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_utils.h
new file mode 100644
index 00000000..99fb02f2
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_utils.h
@@ -0,0 +1,295 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_utils.h
+ * @author MCD Application Team
+ * @brief Header file of UTILS LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL UTILS driver contains a set of generic APIs that can be
+ used by user:
+ (+) Device electronic signature
+ (+) Timing functions
+ (+) PLL configuration functions
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_UTILS_H
+#define __STM32F3xx_LL_UTILS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+/** @defgroup UTILS_LL UTILS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
+ * @{
+ */
+
+/* Max delay can be used in LL_mDelay */
+#define LL_MAX_DELAY 0xFFFFFFFFU
+
+/**
+ * @brief Unique device ID register base address
+ */
+#define UID_BASE_ADDRESS UID_BASE
+
+/**
+ * @brief Flash size data register base address
+ */
+#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
+
+/**
+ * @brief Package data register base address
+ */
+#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
+ * @{
+ */
+/**
+ * @brief UTILS PLL structure definition
+ */
+typedef struct
+{
+ uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock.
+ This parameter can be a value of @ref RCC_LL_EC_PLL_MUL
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ uint32_t PLLDiv; /*!< Division factor for PLL VCO output clock.
+ This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+#else
+ uint32_t Prediv; /*!< Division factor for HSE used as PLL clock source.
+ This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+} LL_UTILS_PLLInitTypeDef;
+
+/**
+ * @brief UTILS System, AHB and APB buses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAHBPrescaler(). */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAPB1Prescaler(). */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAPB2Prescaler(). */
+
+} LL_UTILS_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
+ * @{
+ */
+
+/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
+ * @{
+ */
+#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
+#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
+ * @{
+ */
+
+/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
+ * @{
+ */
+
+/**
+ * @brief Get Word0 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
+}
+
+/**
+ * @brief Get Word1 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40])
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
+}
+
+/**
+ * @brief Get Word2 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24]
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
+}
+
+/**
+ * @brief Get Flash memory size
+ * @note This bitfield indicates the size of the device Flash memory expressed in
+ * Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
+ * @retval FLASH_SIZE[15:0]: Flash memory size
+ */
+__STATIC_INLINE uint32_t LL_GetFlashSize(void)
+{
+ return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_LL_EF_DELAY DELAY
+ * @{
+ */
+
+/**
+ * @brief This function configures the Cortex-M SysTick source of the time base.
+ * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
+ * @note When a RTOS is used, it is recommended to avoid changing the SysTick
+ * configuration by calling this function, for a delay use rather osDelay RTOS service.
+ * @param Ticks Number of ticks
+ * @retval None
+ */
+__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
+{
+ /* Configure the SysTick to have interrupt in 1ms time base */
+ SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
+}
+
+void LL_Init1msTick(uint32_t HCLKFrequency);
+void LL_mDelay(uint32_t Delay);
+
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_EF_SYSTEM SYSTEM
+ * @{
+ */
+
+void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
+ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
+ LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_UTILS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal.c
new file mode 100644
index 00000000..5be17ad4
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal.c
@@ -0,0 +1,486 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal.c
+ * @author MCD Application Team
+ * @brief HAL module driver.
+ * This is the common part of the HAL initialization
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The common HAL driver contains a set of generic and common APIs that can be
+ used by the PPP peripheral drivers and the user to start using the HAL.
+ [..]
+ The HAL contains two APIs categories:
+ (+) HAL Initialization and de-initialization functions
+ (+) HAL Control functions
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL
+ * @brief HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup HAL_Private Constants
+ * @{
+ */
+/**
+ * @brief STM32F3xx HAL Driver version number V1.5.0
+ */
+#define __STM32F3xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
+#define __STM32F3xx_HAL_VERSION_SUB1 (0x05U) /*!< [23:16] sub1 version */
+#define __STM32F3xx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
+#define __STM32F3xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
+#define __STM32F3xx_HAL_VERSION ((__STM32F3xx_HAL_VERSION_MAIN << 24U)\
+ |(__STM32F3xx_HAL_VERSION_SUB1 << 16U)\
+ |(__STM32F3xx_HAL_VERSION_SUB2 << 8U )\
+ |(__STM32F3xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK (0x00000FFFU)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+__IO uint32_t uwTick;
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initializes the Flash interface, the NVIC allocation and initial clock
+ configuration. It initializes the source of time base also when timeout
+ is needed and the backup domain when enabled.
+ (+) de-Initializes common part of the HAL.
+ (+) Configure The time base source to have 1ms time base with a dedicated
+ Tick interrupt priority.
+ (++) Systick timer is used by default as source of time base, but user
+ can eventually implement his proper time base source (a general purpose
+ timer for example or other time source), keeping in mind that Time base
+ duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+ handled in milliseconds basis.
+ (++) Time base configuration function (HAL_InitTick ()) is called automatically
+ at the beginning of the program after reset by HAL_Init() or at any time
+ when clock is configured, by HAL_RCC_ClockConfig().
+ (++) Source of time base is configured to generate interrupts at regular
+ time intervals. Care must be taken if HAL_Delay() is called from a
+ peripheral ISR process, the Tick interrupt line must have higher priority
+ (numerically lower) than the peripheral interrupt. Otherwise the caller
+ ISR process will be blocked.
+ (++) functions affecting time base configurations are declared as __Weak
+ to make override possible in case of other implementations in user file.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function configures the Flash prefetch,
+ * Configures time base source, NVIC and Low level hardware
+ * @note This function is called at the beginning of program after reset and before
+ * the clock configuration
+ *
+ * @note The Systick configuration is based on HSI clock, as HSI is the clock
+ * used after a system Reset and the NVIC configuration is set to Priority group 4
+ *
+ * @note The time base configuration is based on MSI clock when exting from Reset.
+ * Once done, time base tick start incrementing.
+ * In the default implementation,Systick is used as source of time base.
+ * The tick variable is incremented each 1ms in its ISR.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0U)
+ __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+ /* Set Interrupt Group Priority */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* Enable systick and configure 1ms tick (default clock after Reset is HSI) */
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ /* Init the low level hardware */
+ HAL_MspInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function de-Initializes common part of the HAL and stops the source
+ * of time base.
+ * @note This function is optional.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+ /* Reset of all peripherals */
+ __HAL_RCC_APB1_FORCE_RESET();
+ __HAL_RCC_APB1_RELEASE_RESET();
+
+ __HAL_RCC_APB2_FORCE_RESET();
+ __HAL_RCC_APB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB_FORCE_RESET();
+ __HAL_RCC_AHB_RELEASE_RESET();
+
+ /* De-Init the low level hardware */
+ HAL_MspDeInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspDeInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function configures the source of the time base.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
+ * @note This function is called automatically at the beginning of program after
+ * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals.
+ * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+ * The the SysTick interrupt must have higher priority (numerically lower)
+ * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementation in user file.
+ * @param TickPriority Tick interrupt priority.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ /*Configure the SysTick to have interrupt in 1ms time basis*/
+ HAL_SYSTICK_Config(SystemCoreClock / 1000U);
+
+ /*Configure the SysTick IRQ priority */
+ HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0U);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### HAL Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Provide a tick value in millisecond
+ (+) Provide a blocking delay in millisecond
+ (+) Suspend the time base source interrupt
+ (+) Resume the time base source interrupt
+ (+) Get the HAL API driver version
+ (+) Get the device identifier
+ (+) Get the device revision identifier
+ (+) Enable/Disable Debug module during Sleep mode
+ (+) Enable/Disable Debug module during STOP mode
+ (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is called to increment a global variable "uwTick"
+ * used as application time base.
+ * @note In the default implementation, this variable is incremented each 1ms
+ * in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_IncTick(void)
+{
+ uwTick++;
+}
+
+/**
+ * @brief Povides a tick value in millisecond.
+ * @note The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval tick value
+ */
+__weak uint32_t HAL_GetTick(void)
+{
+ return uwTick;
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on variable incremented.
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals where uwTick
+ * is incremented.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @param Delay specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t wait = Delay;
+
+ /* Add a period to guarantee minimum wait */
+ if (wait < HAL_MAX_DELAY)
+ {
+ wait++;
+ }
+
+ while((HAL_GetTick() - tickstart) < wait)
+ {
+ }
+}
+
+/**
+ * @brief Suspend Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+ * is called, the the SysTick interrupt will be disabled and so Tick increment
+ * is suspended.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_SuspendTick(void)
+
+{
+ /* Disable SysTick Interrupt */
+ SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+
+}
+
+/**
+ * @brief Resume Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+ * is called, the the SysTick interrupt will be enabled and so Tick increment
+ * is resumed.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_ResumeTick(void)
+{
+ /* Enable SysTick Interrupt */
+ SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
+
+}
+
+/**
+ * @brief This function returns the HAL revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F3xx_HAL_VERSION;
+}
+
+/**
+ * @brief Returns the device revision identifier.
+ * @retval Device revision identifier
+ */
+uint32_t HAL_GetREVID(void)
+{
+ return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @retval Device identifier
+ */
+uint32_t HAL_GetDEVID(void)
+{
+ return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Returns first word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw0(void)
+{
+ return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+ * @brief Returns second word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw1(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+ * @brief Returns third word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw2(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_cortex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_cortex.c
new file mode 100644
index 00000000..38080d53
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_cortex.c
@@ -0,0 +1,529 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cortex.c
+ * @author MCD Application Team
+ * @brief CORTEX HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CORTEX:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ * @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ *** How to configure Interrupts using CORTEX HAL driver ***
+ ===========================================================
+ [..]
+ This section provides functions allowing to configure the NVIC interrupts (IRQ).
+ The Cortex-M4 exceptions are managed by CMSIS functions.
+
+ (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function
+
+ (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
+
+ (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
+
+
+ -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible.
+ The pending IRQ priority will be managed only by the sub priority.
+
+ -@- IRQ priority order (sorted by highest to lowest priority):
+ (+@) Lowest pre-emption priority
+ (+@) Lowest sub priority
+ (+@) Lowest hardware priority (IRQ number)
+
+ [..]
+ *** How to configure Systick using CORTEX HAL driver ***
+ ========================================================
+ [..]
+ Setup SysTick Timer for time base
+
+ (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
+ is a CMSIS function that:
+ (++) Configures the SysTick Reload register with value passed as function parameter.
+ (++) Configures the SysTick IRQ priority to the lowest value (0x0FU).
+ (++) Resets the SysTick Counter register.
+ (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+ (++) Enables the SysTick Interrupt.
+ (++) Starts the SysTick Counter.
+
+ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+ __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+ HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+ inside the stm32f3xx_hal_cortex.h file.
+
+ (+) You can change the SysTick IRQ priority by calling the
+ HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+ call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+ (+) To adjust the SysTick time base, use the following formula:
+
+ Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
+ (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+ (++) Reload Value should not exceed 0xFFFFFF
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*
+ Additional Tables: CORTEX_NVIC_Priority_Table
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function
+ ==========================================================================================================================
+ NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ ==========================================================================================================================
+ NVIC_PRIORITYGROUP_0 | 0 | 0U-15 | 0 bits for pre-emption priority
+ | | | 4 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_1 | 0U-1 | 0U-7 | 1 bits for pre-emption priority
+ | | | 3 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_2 | 0U-3 | 0U-3 | 2 bits for pre-emption priority
+ | | | 2 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_3 | 0U-7 | 0U-1 | 3 bits for pre-emption priority
+ | | | 1 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_4 | 0U-15 | 0 | 4 bits for pre-emption priority
+ | | | 0 bits for subpriority
+ ==========================================================================================================================
+
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX CORTEX
+ * @brief CORTEX CORTEX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+ Systick functionalities
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Sets the priority grouping field (pre-emption priority and subpriority)
+ * using the required unlock sequence.
+ * @param PriorityGroup The priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+ NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+ * @brief Sets the priority of an interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @param PreemptPriority The pre-emption priority for the IRQn channel.
+ * This parameter can be a value between 0 and 15 as described in the table CORTEX_NVIC_Priority_Table
+ * A lower priority value indicates a higher priority
+ * @param SubPriority the subpriority level for the IRQ channel.
+ * This parameter can be a value between 0 and 15 as described in the table CORTEX_NVIC_Priority_Table
+ * A lower priority value indicates a higher priority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t prioritygroup = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+ prioritygroup = NVIC_GetPriorityGrouping();
+
+ NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+ * @brief Enables a device specific interrupt in the NVIC interrupt controller.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Enable interrupt */
+ NVIC_EnableIRQ(IRQn);
+}
+
+/**
+ * @brief Disables a device specific interrupt in the NVIC interrupt controller.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Disable interrupt */
+ NVIC_DisableIRQ(IRQn);
+}
+
+/**
+ * @brief Initiates a system reset request to reset the MCU.
+ * @retval None
+ */
+void HAL_NVIC_SystemReset(void)
+{
+ /* System Reset */
+ NVIC_SystemReset();
+}
+
+/**
+ * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ * Counter is in free running mode to generate periodic interrupts.
+ * @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
+ * @retval status: - 0 Function succeeded.
+ * - 1 Function failed.
+ */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ return SysTick_Config(TicksNumb);
+}
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CORTEX
+ (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+
+/**
+ * @brief Disables the MPU also clears the HFNMIENA bit (ARM recommendation)
+ * @retval None
+ */
+void HAL_MPU_Disable(void)
+{
+ /* Disable fault exceptions */
+ SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Disable the MPU */
+ MPU->CTRL = 0U;
+}
+
+/**
+ * @brief Enables the MPU
+ * @param MPU_Control Specifies the control mode of the MPU during hard fault,
+ * NMI, FAULTMASK and privileged access to the default memory
+ * This parameter can be one of the following values:
+ * @arg MPU_HFNMI_PRIVDEF_NONE
+ * @arg MPU_HARDFAULT_NMI
+ * @arg MPU_PRIVILEGED_DEFAULT
+ * @arg MPU_HFNMI_PRIVDEF
+ * @retval None
+ */
+void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+ /* Enable the MPU */
+ MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+
+ /* Enable fault exceptions */
+ SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+}
+
+ /**
+ * @brief Initializes and configures the Region and the memory to be protected.
+ * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
+ * the initialization and configuration information.
+ * @retval None
+ */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+ /* Check the parameters */
+ assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+ assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+ /* Set the Region number */
+ MPU->RNR = MPU_Init->Number;
+
+ if ((MPU_Init->Enable) != RESET)
+ {
+ /* Check the parameters */
+ assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+ assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+ assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+ assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+ assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+ assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+ assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+ assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+
+ MPU->RBAR = MPU_Init->BaseAddress;
+ MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
+ ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
+ ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
+ ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
+ ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
+ ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
+ ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
+ ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
+ ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
+ }
+ else
+ {
+ MPU->RBAR = 0x00U;
+ MPU->RASR = 0x00U;
+ }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+ * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
+ * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+ */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+ /* Get the PRIGROUP[10:8] field value */
+ return NVIC_GetPriorityGrouping();
+}
+
+/**
+ * @brief Gets the priority of an interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @param PriorityGroup: the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
+ * @param pSubPriority Pointer on the Subpriority value (starting from 0).
+ * @retval None
+ */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+ NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+ * @brief Sets Pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Set interrupt pending */
+ NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets Pending Interrupt (reads the pending register in the NVIC
+ * and returns the pending bit for the specified interrupt).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Return 1 if pending else 0U */
+ return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Clears the pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ /* Clear pending interrupt */
+ NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+ /* Return 1 if active else 0U */
+ return NVIC_GetActive(IRQn);
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param CLKSource specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+ if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+ {
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+ }
+}
+
+/**
+ * @brief This function handles SYSTICK interrupt request.
+ * @retval None
+ */
+void HAL_SYSTICK_IRQHandler(void)
+{
+ HAL_SYSTICK_Callback();
+}
+
+/**
+ * @brief SYSTICK callback.
+ * @retval None
+ */
+__weak void HAL_SYSTICK_Callback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SYSTICK_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_dma.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_dma.c
new file mode 100644
index 00000000..69e42aa9
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_dma.c
@@ -0,0 +1,904 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma.c
+ * @author MCD Application Team
+ * @brief DMA HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Direct Memory Access (DMA) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable and configure the peripheral to be connected to the DMA Channel
+ (except for internal SRAM / FLASH memories: no initialization is
+ necessary). Please refer to Reference manual for connection between peripherals
+ and DMA requests .
+
+ (#) For a given Channel, program the required configuration through the following parameters:
+ Transfer Direction, Source and Destination data formats,
+ Circular or Normal mode, Channel Priority level, Source and Destination Increment mode,
+ using HAL_DMA_Init() function.
+
+ (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+ detection.
+
+ (#) Use HAL_DMA_Abort() function to abort the current transfer
+
+ -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+ address and destination address and the Length of data to be transferred
+ (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+ case a fixed Timeout can be configured by User depending from his application.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+ (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+ (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+ Source address and destination address and the Length of data to be transferred.
+ In this case the DMA interrupt is configured
+ (+) Use HAL_DMA_Channel_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+ (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback and
+ XferErrorCallback (i.e a member of DMA handle structure).
+
+ *** DMA HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA HAL driver.
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA DMA
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @{
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize the DMA Channel source
+ and destination addresses, incrementation and data sizes, transfer direction,
+ circular/normal mode selection, memory-to-memory mode selection and Channel priority value.
+ [..]
+ The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+ reference manual.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DMA according to the specified
+ * parameters in the DMA_InitTypeDef and initialize the associated handle.
+ * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the DMA handle allocation */
+ if(NULL == hdma)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+ assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+ assert_param(IS_DMA_MODE(hdma->Init.Mode));
+ assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Get the CR register value */
+ tmp = hdma->Instance->CCR;
+
+ /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */
+ tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \
+ DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \
+ DMA_CCR_DIR));
+
+ /* Prepare the DMA Channel configuration */
+ tmp |= hdma->Init.Direction |
+ hdma->Init.PeriphInc | hdma->Init.MemInc |
+ hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+ hdma->Init.Mode | hdma->Init.Priority;
+
+ /* Write to DMA Channel CR register */
+ hdma->Instance->CCR = tmp;
+
+ /* Initialize DmaBaseAddress and ChannelIndex parameters used
+ by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+ DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clean callbacks */
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+
+ /* Initialise the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Allocate lock resource and initialize it */
+ hdma->Lock = HAL_UNLOCKED;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the DMA peripheral
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+ /* Check the DMA handle allocation */
+ if(NULL == hdma)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+ /* Disable the selected DMA Channelx */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Reset DMA Channel control register */
+ hdma->Instance->CCR = 0U;
+
+ /* Reset DMA Channel Number of Data to Transfer register */
+ hdma->Instance->CNDTR = 0U;
+
+ /* Reset DMA Channel peripheral address register */
+ hdma->Instance->CPAR = 0U;
+
+ /* Reset DMA Channel memory address register */
+ hdma->Instance->CMAR = 0U;
+
+ /* Get DMA Base Address */
+ DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions
+ * @brief I/O operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and Start DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start DMA transfer with interrupt
+ (+) Abort DMA transfer
+ (+) Poll for transfer complete
+ (+) Handle DMA interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Disable the peripheral */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the Peripheral */
+ hdma->Instance->CCR |= DMA_CCR_EN;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Remain BUSY */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Start the DMA Transfer with interrupt enabled.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Disable the peripheral */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the transfer complete, & transfer error interrupts */
+ /* Half transfer interrupt is optional: enable it only if associated callback is available */
+ if(NULL != hdma->XferHalfCpltCallback )
+ {
+ hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+ }
+ else
+ {
+ hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE);
+ hdma->Instance->CCR &= ~DMA_IT_HT;
+ }
+
+ /* Enable the Peripheral */
+ hdma->Instance->CCR |= DMA_CCR_EN;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Remain BUSY */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Abort the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+ /* Disable DMA IT */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+
+ /* Disable the channel */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex);
+
+ /* Change the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the DMA Transfer in Interrupt mode.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(HAL_DMA_STATE_BUSY != hdma->State)
+ {
+ /* no transfer ongoing */
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+
+ status = HAL_ERROR;
+ }
+ else
+ {
+
+ /* Disable DMA IT */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+
+ /* Disable the channel */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Call User Abort callback */
+ if(hdma->XferAbortCallback != NULL)
+ {
+ hdma->XferAbortCallback(hdma);
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Polling for transfer complete.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param CompleteLevel Specifies the DMA level complete.
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
+{
+ uint32_t temp;
+ uint32_t tickstart = 0U;
+
+ if(HAL_DMA_STATE_BUSY != hdma->State)
+ {
+ /* no transfer ongoing */
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ __HAL_UNLOCK(hdma);
+ return HAL_ERROR;
+ }
+
+ /* Polling mode not supported in circular mode */
+ if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC))
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Get the level transfer complete flag */
+ if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+ {
+ /* Transfer Complete flag */
+ temp = DMA_FLAG_TC1 << hdma->ChannelIndex;
+ }
+ else
+ {
+ /* Half Transfer Complete flag */
+ temp = DMA_FLAG_HT1 << hdma->ChannelIndex;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(RESET == (hdma->DmaBaseAddress->ISR & temp))
+ {
+ if(RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex)))
+ {
+ /* When a DMA transfer error occurs */
+ /* A hardware clear of its EN bits is performed */
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TE;
+
+ /* Change the DMA state */
+ hdma->State= HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+ {
+ /* Clear the transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex;
+
+ /* The selected Channelx EN bit is cleared (DMA is disabled and
+ all transfers are complete) */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ else
+ {
+ /* Clear the half transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle DMA interrupt request.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval None
+ */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+ uint32_t flag_it = hdma->DmaBaseAddress->ISR;
+ uint32_t source_it = hdma->Instance->CCR;
+
+ /* Half Transfer Complete Interrupt management ******************************/
+ if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT)))
+ {
+ /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+ {
+ /* Disable the half transfer interrupt */
+ hdma->Instance->CCR &= ~DMA_IT_HT;
+ }
+
+ /* Clear the half transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex;
+
+ /* DMA peripheral state is not updated in Half Transfer */
+ /* State is updated only in Transfer Complete case */
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+
+ /* Transfer Complete Interrupt management ***********************************/
+ else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC)))
+ {
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+ {
+ /* Disable the transfer complete & transfer error interrupts */
+ /* if the DMA mode is not CIRCULAR */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ /* Clear the transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete callback */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+
+ /* Transfer Error Interrupt management ***************************************/
+ else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE)))
+ {
+ /* When a DMA transfer error occurs */
+ /* A hardware clear of its EN bits is performed */
+ /* Then, disable all DMA interrupts */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TE;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ if(hdma->XferErrorCallback != NULL)
+ {
+ /* Transfer error callback */
+ hdma->XferErrorCallback(hdma);
+ }
+ }
+}
+
+/**
+ * @brief Register callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @param pCallback pointer to private callback function which has pointer to
+ * a DMA_HandleTypeDef structure as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma))
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = pCallback;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ALL_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DMA state
+ (+) Get error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the DMA state.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL state
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+ return hdma->State;
+}
+
+/**
+ * @brief Return the DMA error code
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval DMA Error Code
+ */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+ return hdma->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Set the DMA Transfer parameters.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex);
+
+ /* Configure DMA Channel data length */
+ hdma->Instance->CNDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Channel destination address */
+ hdma->Instance->CPAR = DstAddress;
+
+ /* Configure DMA Channel source address */
+ hdma->Instance->CMAR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Channel source address */
+ hdma->Instance->CPAR = SrcAddress;
+
+ /* Configure DMA Channel destination address */
+ hdma->Instance->CMAR = DstAddress;
+ }
+}
+
+/**
+ * @brief Set the DMA base address and channel index depending on DMA instance
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval None
+ */
+static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+#if defined (DMA2)
+ /* calculation of the channel index */
+ if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1))
+ {
+ /* DMA1 */
+ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
+ hdma->DmaBaseAddress = DMA1;
+ }
+ else
+ {
+ /* DMA2 */
+ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U;
+ hdma->DmaBaseAddress = DMA2;
+ }
+#else
+ /* calculation of the channel index */
+ /* DMA1 */
+ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
+ hdma->DmaBaseAddress = DMA1;
+#endif
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash.c
new file mode 100644
index 00000000..5762694e
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash.c
@@ -0,0 +1,707 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash.c
+ * @author MCD Application Team
+ * @brief FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the internal FLASH memory:
+ * + Program operations functions
+ * + Memory Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FLASH peripheral features #####
+ ==============================================================================
+ [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+ to the Flash memory. It implements the erase and program Flash memory operations
+ and the read and write protection mechanisms.
+
+ [..] The Flash memory interface accelerates code execution with a system of instruction
+ prefetch.
+
+ [..] The FLASH main features are:
+ (+) Flash memory read operations
+ (+) Flash memory program/erase operations
+ (+) Read / write protections
+ (+) Prefetch on I-Code
+ (+) Option Bytes programming
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver provides functions and macros to configure and program the FLASH
+ memory of all STM32F3xx devices.
+
+ (#) FLASH Memory I/O Programming functions: this group includes all needed
+ functions to erase and program the main memory:
+ (++) Lock and Unlock the FLASH interface
+ (++) Erase function: Erase page, erase all pages
+ (++) Program functions: half word, word and doubleword
+ (#) FLASH Option Bytes Programming functions: this group includes all needed
+ functions to manage the Option Bytes:
+ (++) Lock and Unlock the Option Bytes
+ (++) Set/Reset the write protection
+ (++) Set the Read protection Level
+ (++) Program the user Option Bytes
+ (++) Launch the Option Bytes loader
+ (++) Erase Option Bytes
+ (++) Program the data Option Bytes
+ (++) Get the Write protection.
+ (++) Get the user option bytes.
+
+ (#) Interrupts and flags management functions : this group
+ includes all needed functions to:
+ (++) Handle FLASH interrupts
+ (++) Wait for last FLASH operation according to its status
+ (++) Get error flag status
+
+ [..] In addition to these function, this driver includes a set of macros allowing
+ to handle the following operations:
+
+ (+) Set/Get the latency
+ (+) Enable/Disable the prefetch buffer
+ (+) Enable/Disable the half cycle access
+ (+) Enable/Disable the FLASH interrupts
+ (+) Monitor the FLASH flags status
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @defgroup FLASH FLASH
+ * @brief FLASH HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macro ---------------------------- ---------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+/* Variables used for Erase pages under interruption*/
+FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void FLASH_SetErrorCode(void);
+extern void FLASH_PageErase(uint32_t PageAddress);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ * @brief Programming operation functions
+ *
+@verbatim
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Program halfword, word or double word at a specified address
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @note FLASH should be previously erased before new programmation (only exception to this
+ * is when 0x0000 is programmed)
+ *
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address Specifie the address to be programmed.
+ * @param Data Specifie the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint8_t index = 0U;
+ uint8_t nbiterations = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+ {
+ /* Program halfword (16-bit) at a specified address. */
+ nbiterations = 1U;
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+ {
+ /* Program word (32-bit = 2*16-bit) at a specified address. */
+ nbiterations = 2U;
+ }
+ else
+ {
+ /* Program double word (64-bit = 4*16-bit) at a specified address. */
+ nbiterations = 4U;
+ }
+
+ for (index = 0U; index < nbiterations; index++)
+ {
+ FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the PG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+ /* In case of error, stop programation procedure */
+ if (status != HAL_OK)
+ {
+ break;
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Program halfword, word or double word at a specified address with interrupt enabled.
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address Specifie the address to be programmed.
+ * @param Data Specifie the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+ /* Enable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+ pFlash.Address = Address;
+ pFlash.Data = Data;
+
+ if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD;
+ /* Program halfword (16-bit) at a specified address. */
+ pFlash.DataRemaining = 1U;
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD;
+ /* Program word (32-bit : 2*16-bit) at a specified address. */
+ pFlash.DataRemaining = 2U;
+ }
+ else
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD;
+ /* Program double word (64-bit : 4*16-bit) at a specified address. */
+ pFlash.DataRemaining = 4U;
+ }
+
+ /* Program halfword (16-bit) at a specified address. */
+ FLASH_Program_HalfWord(Address, (uint16_t)Data);
+
+ return status;
+}
+
+/**
+ * @brief This function handles FLASH interrupt request.
+ * @retval None
+ */
+void HAL_FLASH_IRQHandler(void)
+{
+ uint32_t addresstmp = 0U;
+
+ /* Check FLASH operation error flags */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ /* Return the faulty address */
+ addresstmp = pFlash.Address;
+ /* Reset address */
+ pFlash.Address = 0xFFFFFFFFU;
+
+ /* Save the Error code */
+ FLASH_SetErrorCode();
+
+ /* FLASH error interrupt user callback */
+ HAL_FLASH_OperationErrorCallback(addresstmp);
+
+ /* Stop the procedure ongoing */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+ /* Process can continue only if no error detected */
+ if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+ {
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
+ {
+ /* Nb of pages to erased can be decreased */
+ pFlash.DataRemaining--;
+
+ /* Check if there are still pages to erase */
+ if(pFlash.DataRemaining != 0U)
+ {
+ addresstmp = pFlash.Address;
+ /*Indicate user which sector has been erased */
+ HAL_FLASH_EndOfOperationCallback(addresstmp);
+
+ /*Increment sector number*/
+ addresstmp = pFlash.Address + FLASH_PAGE_SIZE;
+ pFlash.Address = addresstmp;
+
+ /* If the erase operation is completed, disable the PER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+ FLASH_PageErase(addresstmp);
+ }
+ else
+ {
+ /* No more pages to Erase, user callback can be called. */
+ /* Reset Sector and stop Erase pages procedure */
+ pFlash.Address = addresstmp = 0xFFFFFFFFU;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(addresstmp);
+ }
+ }
+ else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+ {
+ /* Operation is completed, disable the MER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+
+ /* MassErase ended. Return the selected bank */
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(0U);
+
+ /* Stop Mass Erase procedure*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ else
+ {
+ /* Nb of 16-bit data to program can be decreased */
+ pFlash.DataRemaining--;
+
+ /* Check if there are still 16-bit data to program */
+ if(pFlash.DataRemaining != 0U)
+ {
+ /* Increment address to 16-bit */
+ pFlash.Address += 2U;
+ addresstmp = pFlash.Address;
+
+ /* Shift to have next 16-bit data */
+ pFlash.Data = (pFlash.Data >> 16U);
+
+ /* Operation is completed, disable the PG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data);
+ }
+ else
+ {
+ /* Program ended. Return the selected address */
+ /* FLASH EOP interrupt user callback */
+ if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD)
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+ }
+ else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD)
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U);
+ }
+ else
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U);
+ }
+
+ /* Reset Address and stop Program procedure */
+ pFlash.Address = 0xFFFFFFFFU;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ }
+ }
+ }
+
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+ {
+ /* Operation is completed, disable the PG, PER and MER Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER));
+
+ /* Disable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ }
+}
+
+/**
+ * @brief FLASH end of operation interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Mass Erase: No return value expected
+ * - Pages Erase: Address of the page which has been erased
+ * (if 0xFFFFFFFF, it means that all the selected pages have been erased)
+ * - Program: Address which was selected for data program
+ * @retval none
+ */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FLASH operation error interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Mass Erase: No return value expected
+ * - Pages Erase: Address of the page which returned an error
+ * - Program: Address which was selected for data program
+ * @retval none
+ */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Unlock the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+ if (HAL_IS_BIT_SET(FLASH->CR, FLASH_CR_LOCK))
+ {
+ /* Authorize the FLASH Registers access */
+ WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+ WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Locks the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+ /* Set the LOCK Bit to lock the FLASH Registers access */
+ SET_BIT(FLASH->CR, FLASH_CR_LOCK);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Unlock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+ if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE))
+ {
+ /* Authorizes the Option Byte register programming */
+ WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
+ WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Lock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+ /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Launch the option byte loading.
+ * @note This function will reset automatically the MCU.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+ /* Set the OBL_Launch bit to launch the option byte loading */
+ SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
+
+ /* Wait for last operation to be completed */
+ return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions
+ * @brief Peripheral errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH error flag.
+ * @retval FLASH_ErrorCode The returned value can be:
+ * @ref FLASH_Error_Codes
+ */
+uint32_t HAL_FLASH_GetError(void)
+{
+ return pFlash.ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Program a half-word (16-bit) at a specified address.
+ * @param Address specify the address to be programmed.
+ * @param Data specify the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Proceed to program the new data */
+ SET_BIT(FLASH->CR, FLASH_CR_PG);
+
+ /* Write data in the address */
+ *(__IO uint16_t*)Address = Data;
+}
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout maximum flash operation timeout
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+
+ uint32_t tickstart = HAL_GetTick();
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY))
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ /*Save the error code*/
+ FLASH_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* There is no error flag set */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval None
+ */
+static void FLASH_SetErrorCode(void)
+{
+ uint32_t flags = 0U;
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+ flags |= FLASH_FLAG_WRPERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG;
+ flags |= FLASH_FLAG_PGERR;
+ }
+ /* Clear FLASH error pending bits */
+ __HAL_FLASH_CLEAR_FLAG(flags);
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c
new file mode 100644
index 00000000..211ec0cc
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c
@@ -0,0 +1,1005 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash_ex.c
+ * @author MCD Application Team
+ * @brief Extended FLASH HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the FLASH peripheral:
+ * + Extended Initialization/de-initialization functions
+ * + Extended I/O operation functions
+ * + Extended Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Flash peripheral extended features #####
+ ==============================================================================
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure and program the FLASH memory
+ of all STM32F3xxx devices. It includes
+
+ (++) Set/Reset the write protection
+ (++) Program the user Option Bytes
+ (++) Get the Read protection Level
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @addtogroup FLASH
+ * @{
+ */
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+/* Variables used for Erase pages under interruption*/
+extern FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx FLASHEx
+ * @brief FLASH HAL Extension module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
+ * @{
+ */
+#define FLASH_POSITION_IWDGSW_BIT (uint32_t)POSITION_VAL(FLASH_OBR_IWDG_SW)
+#define FLASH_POSITION_OB_USERDATA0_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA0)
+#define FLASH_POSITION_OB_USERDATA1_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA1)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
+ * @{
+ */
+/* Erase operations */
+static void FLASH_MassErase(void);
+void FLASH_PageErase(uint32_t PageAddress);
+
+/* Option bytes control */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
+static uint32_t FLASH_OB_GetWRP(void);
+static uint32_t FLASH_OB_GetRDP(void);
+static uint8_t FLASH_OB_GetUser(void);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions
+ * @brief FLASH Memory Erasing functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FLASH Erasing Programming functions #####
+ ==============================================================================
+
+ [..] The FLASH Memory Erasing functions, includes the following functions:
+ (+) @ref HAL_FLASHEx_Erase: return only when erase has been done
+ (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback
+ is called with parameter 0xFFFFFFFF
+
+ [..] Any operation of erase should follow these steps:
+ (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and
+ program memory access.
+ (#) Call the desired function to erase page.
+ (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access
+ (recommended to protect the FLASH memory against possible unwanted operation).
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory pages
+ * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation)
+ * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @param[out] PageError pointer to variable that
+ * contains the configuration information on faulty page in case of error
+ * (0xFFFFFFFF means that all the pages have been correctly erased)
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t address = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /* Mass Erase requested for Bank1 */
+ /* Wait for last operation to be completed */
+ if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
+ {
+ /*Mass erase to be done*/
+ FLASH_MassErase();
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the MER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+ }
+ }
+ else
+ {
+ /* Page Erase is requested */
+ /* Check the parameters */
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+ assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+ /* Page Erase requested on address located on bank1 */
+ /* Wait for last operation to be completed */
+ if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
+ {
+ /*Initialization of PageError variable*/
+ *PageError = 0xFFFFFFFFU;
+
+ /* Erase page by page to be done*/
+ for(address = pEraseInit->PageAddress;
+ address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress);
+ address += FLASH_PAGE_SIZE)
+ {
+ FLASH_PageErase(address);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the PER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+ if (status != HAL_OK)
+ {
+ /* In case of error, stop erase procedure and return the faulty address */
+ *PageError = address;
+ break;
+ }
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled
+ * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation)
+ * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* If procedure already ongoing, reject the next one */
+ if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Enable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+ if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+ FLASH_MassErase();
+ }
+ else
+ {
+ /* Erase by page to be done*/
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+ assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
+ pFlash.DataRemaining = pEraseInit->NbPages;
+ pFlash.Address = pEraseInit->PageAddress;
+
+ /*Erase 1st page and wait for IT*/
+ FLASH_PageErase(pEraseInit->PageAddress);
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions
+ * @brief Option Bytes Programming functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Option Bytes Programming functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ option bytes operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
+{
+ uint8_t rdptmp = OB_RDP_LEVEL_0;
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Get the actual read protection Option Byte value */
+ rdptmp = FLASH_OB_GetRDP();
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* If the previous operation is completed, proceed to erase the option bytes */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the OPTER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+ if(status == HAL_OK)
+ {
+ /* Restore the last read protection Option Byte value */
+ status = FLASH_OB_RDP_LevelConfig(rdptmp);
+ }
+ }
+
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Program option bytes
+ * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ *
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+ /* Write protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+ {
+ assert_param(IS_WRPSTATE(pOBInit->WRPState));
+ if (pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+ {
+ /* Enable of Write protection on the selected page */
+ status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
+ }
+ else
+ {
+ /* Disable of Write protection on the selected page */
+ status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
+ }
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* Read protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+ {
+ status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* USER configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+ {
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig);
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* DATA configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
+ {
+ status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Get the Option byte configuration
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;
+
+ /*Get WRP*/
+ pOBInit->WRPPage = FLASH_OB_GetWRP();
+
+ /*Get RDP Level*/
+ pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+ /*Get USER*/
+ pOBInit->USERConfig = FLASH_OB_GetUser();
+}
+
+/**
+ * @brief Get the Option byte user data
+ * @param DATAAdress Address of the option byte DATA
+ * This parameter can be one of the following values:
+ * @arg @ref OB_DATA_ADDRESS_DATA0
+ * @arg @ref OB_DATA_ADDRESS_DATA1
+ * @retval Value programmed in USER data
+ */
+uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress)
+{
+ uint32_t value = 0U;
+
+ if (DATAAdress == OB_DATA_ADDRESS_DATA0)
+ {
+ /* Get value programmed in OB USER Data0 */
+ value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT;
+ }
+ else
+ {
+ /* Get value programmed in OB USER Data1 */
+ value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT;
+ }
+
+ return value;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Full erase of FLASH memory Bank
+ *
+ * @retval None
+ */
+static void FLASH_MassErase(void)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Only bank1 will be erased*/
+ SET_BIT(FLASH->CR, FLASH_CR_MER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+ * @brief Enable the write protection of the desired pages
+ * @note An option byte erase is done automatically in this function.
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash page i if
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WriteProtectPage specifies the page(s) to be write protected.
+ * The value of this parameter depend on device used within the same series
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint16_t WRP0_Data = 0xFFFFU;
+#if defined(OB_WRP1_WRP1)
+ uint16_t WRP1_Data = 0xFFFFU;
+#endif /* OB_WRP1_WRP1 */
+#if defined(OB_WRP2_WRP2)
+ uint16_t WRP2_Data = 0xFFFFU;
+#endif /* OB_WRP2_WRP2 */
+#if defined(OB_WRP3_WRP3)
+ uint16_t WRP3_Data = 0xFFFFU;
+#endif /* OB_WRP3_WRP3 */
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP(WriteProtectPage));
+
+ /* Get current write protected pages and the new pages to be protected ******/
+ WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage));
+
+#if defined(OB_WRP_PAGES0TO15MASK)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+#endif /* OB_WRP_PAGES0TO31MASK */
+
+#if defined(OB_WRP_PAGES16TO31MASK)
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
+#endif /* OB_WRP_PAGES32TO63MASK */
+
+#if defined(OB_WRP_PAGES32TO47MASK)
+ WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
+#endif /* OB_WRP_PAGES32TO47MASK */
+
+#if defined(OB_WRP_PAGES48TO127MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U);
+#elif defined(OB_WRP_PAGES48TO255MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U);
+#endif /* OB_WRP_PAGES48TO63MASK */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* To be able to write again option byte, need to perform a option byte erase */
+ status = HAL_FLASHEx_OBErase();
+ if (status == HAL_OK)
+ {
+ /* Enable write protection */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(OB_WRP0_WRP0)
+ if(WRP0_Data != 0xFFU)
+ {
+ OB->WRP0 &= WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP0_WRP0 */
+
+#if defined(OB_WRP1_WRP1)
+ if((status == HAL_OK) && (WRP1_Data != 0xFFU))
+ {
+ OB->WRP1 &= WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP1_WRP1 */
+
+#if defined(OB_WRP2_WRP2)
+ if((status == HAL_OK) && (WRP2_Data != 0xFFU))
+ {
+ OB->WRP2 &= WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP2_WRP2 */
+
+#if defined(OB_WRP3_WRP3)
+ if((status == HAL_OK) && (WRP3_Data != 0xFFU))
+ {
+ OB->WRP3 &= WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP3_WRP3 */
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired pages
+ * @note An option byte erase is done automatically in this function.
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash page i if
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WriteProtectPage specifies the page(s) to be write unprotected.
+ * The value of this parameter depend on device used within the same series
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint16_t WRP0_Data = 0xFFFFU;
+#if defined(OB_WRP1_WRP1)
+ uint16_t WRP1_Data = 0xFFFFU;
+#endif /* OB_WRP1_WRP1 */
+#if defined(OB_WRP2_WRP2)
+ uint16_t WRP2_Data = 0xFFFFU;
+#endif /* OB_WRP2_WRP2 */
+#if defined(OB_WRP3_WRP3)
+ uint16_t WRP3_Data = 0xFFFFU;
+#endif /* OB_WRP3_WRP3 */
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP(WriteProtectPage));
+
+ /* Get current write protected pages and the new pages to be unprotected ******/
+ WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage);
+
+#if defined(OB_WRP_PAGES0TO15MASK)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+#endif /* OB_WRP_PAGES0TO31MASK */
+
+#if defined(OB_WRP_PAGES16TO31MASK)
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
+#endif /* OB_WRP_PAGES32TO63MASK */
+
+#if defined(OB_WRP_PAGES32TO47MASK)
+ WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
+#endif /* OB_WRP_PAGES32TO47MASK */
+
+#if defined(OB_WRP_PAGES48TO127MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U);
+#elif defined(OB_WRP_PAGES48TO255MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U);
+#endif /* OB_WRP_PAGES48TO63MASK */
+
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* To be able to write again option byte, need to perform a option byte erase */
+ status = HAL_FLASHEx_OBErase();
+ if (status == HAL_OK)
+ {
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(OB_WRP0_WRP0)
+ if(WRP0_Data != 0xFFU)
+ {
+ OB->WRP0 |= WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP0_WRP0 */
+
+#if defined(OB_WRP1_WRP1)
+ if((status == HAL_OK) && (WRP1_Data != 0xFFU))
+ {
+ OB->WRP1 |= WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP1_WRP1 */
+
+#if defined(OB_WRP2_WRP2)
+ if((status == HAL_OK) && (WRP2_Data != 0xFFU))
+ {
+ OB->WRP2 |= WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP2_WRP2 */
+
+#if defined(OB_WRP3_WRP3)
+ if((status == HAL_OK) && (WRP3_Data != 0xFFU))
+ {
+ OB->WRP3 |= WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP3_WRP3 */
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Set the read protection level.
+ * @param ReadProtectLevel specifies the read protection level.
+ * This parameter can be one of the following values:
+ * @arg @ref OB_RDP_LEVEL_0 No protection
+ * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
+ * @arg @ref OB_RDP_LEVEL_2 Full chip protection
+ * @note Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* If the previous operation is completed, proceed to erase the option bytes */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the OPTER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+ if(status == HAL_OK)
+ {
+ /* Enable the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+ WRITE_REG(OB->RDP, ReadProtectLevel);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program the FLASH User Option Byte.
+ * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+ * @param UserConfig The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4),
+ * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
+ * And SDADC12_VDD_MONITOR(Bit7) for STM32F373 or STM32F378 .
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW)));
+ assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
+ assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
+ assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
+ assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON)));
+ assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_SRAM_PARITY_RESET)));
+#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
+ assert_param(IS_OB_SDACD_VDD_MONITOR((UserConfig&OB_SDACD_VDD_MONITOR_SET)));
+#endif /* FLASH_OBR_SDADC12_VDD_MONITOR */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Enable the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
+ OB->USER = (UserConfig | 0x08U);
+#else
+ OB->USER = (UserConfig | 0x88U);
+#endif
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ * Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+ * @param Address specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data specifies the data to be programmed.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Enables the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval The FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return (uint32_t)(READ_REG(FLASH->WRPR));
+}
+
+/**
+ * @brief Returns the FLASH Read Protection level.
+ * @retval FLASH RDP level
+ * This parameter can be one of the following values:
+ * @arg @ref OB_RDP_LEVEL_0 No protection
+ * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
+ * @arg @ref OB_RDP_LEVEL_2 Full chip protection
+ */
+static uint32_t FLASH_OB_GetRDP(void)
+{
+ uint32_t tmp_reg = 0U;
+
+ /* Read RDP level bits */
+#if defined(FLASH_OBR_RDPRT)
+ tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT);
+#endif
+#if defined(FLASH_OBR_LEVEL1_PROT)
+ tmp_reg = READ_BIT(FLASH->OBR, (FLASH_OBR_LEVEL1_PROT | FLASH_OBR_LEVEL2_PROT));
+#endif /* FLASH_OBR_LEVEL1_PROT */
+
+#if defined(FLASH_OBR_RDPRT)
+ if (tmp_reg == FLASH_OBR_RDPRT_1)
+#endif
+#if defined(FLASH_OBR_LEVEL1_PROT)
+ if (tmp_reg == FLASH_OBR_LEVEL1_PROT)
+#endif /* FLASH_OBR_LEVEL1_PROT */
+ {
+ return OB_RDP_LEVEL_1;
+ }
+#if defined(FLASH_OBR_RDPRT)
+ else if (tmp_reg == FLASH_OBR_RDPRT_2)
+#elif defined(FLASH_OBR_LEVEL2_PROT)
+ else if (tmp_reg == FLASH_OBR_LEVEL2_PROT)
+#endif
+ {
+ return OB_RDP_LEVEL_2;
+ }
+ else
+ {
+ return OB_RDP_LEVEL_0;
+ }
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4),
+ * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
+ * And SDADC12_VDD_MONITOR(Bit7) for STM32F373 or STM32F378 .
+ */
+static uint8_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Erase the specified FLASH memory page
+ * @param PageAddress FLASH page to erase
+ * The value of this parameter depend on device used within the same series
+ *
+ * @retval None
+ */
+void FLASH_PageErase(uint32_t PageAddress)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Proceed to erase the page */
+ SET_BIT(FLASH->CR, FLASH_CR_PER);
+ WRITE_REG(FLASH->AR, PageAddress);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c
new file mode 100644
index 00000000..d935fcd7
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c
@@ -0,0 +1,547 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio.c
+ * @author MCD Application Team
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
+ configured by software in several modes:
+ (++) Input mode
+ (++) Analog mode
+ (++) Output mode
+ (++) Alternate function mode
+ (++) External interrupt/event lines
+
+ (+) During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ (+) The microcontroller IO pins are connected to onboard peripherals/modules through a
+ multiplexer that allows only one peripheral alternate function (AF) connected
+ to an IO pin at a time. In this way, there can be no conflict between peripherals
+ sharing the same IO pin.
+
+ (+) All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ (+) The external interrupt/event controller consists of up to 23 edge detectors
+ (16 lines are connected to GPIO) for generating event/interrupt requests (each
+ input line can be independently configured to select the type (interrupt or event)
+ and the corresponding trigger event (rising or falling or both). Each line can
+ also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure.
+ (++) In alternate mode is selection, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure.
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15U, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PF0 and PF1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup GPIO_Private_Defines GPIO Private Defines
+ * @{
+ */
+#define GPIO_MODE (0x00000003U)
+#define EXTI_MODE (0x10000000U)
+#define GPIO_MODE_IT (0x00010000U)
+#define GPIO_MODE_EVT (0x00020000U)
+#define RISING_EDGE (0x00100000U)
+#define FALLING_EDGE (0x00200000U)
+#define GPIO_OUTPUT_TYPE (0x00000010U)
+
+#define GPIO_NUMBER (16U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family devices
+ * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t temp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ while (((GPIO_Init->Pin) >> position) != RESET)
+ {
+ /* Get current io position */
+ iocurrent = (GPIO_Init->Pin) & (1U << position);
+
+ if(iocurrent)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameters */
+ assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3];
+ temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U));
+ GPIOx->AFR[position >> 3] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2U));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+ temp |= (GPIO_Init->Speed << (position * 2U));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+ temp |= ((GPIO_Init->Pull) << (position * 2U));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2];
+ temp &= ~((0x0FU) << (4U * (position & 0x03U)));
+ temp |= (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U)));
+ SYSCFG->EXTICR[position >> 2] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+
+ position++;
+ }
+}
+
+/**
+ * @brief De-initialize the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F30X device or STM32F37X device
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t tmp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Configure the port pins */
+ while ((GPIO_Pin >> position) != RESET)
+ {
+ /* Get current io position */
+ iocurrent = GPIO_Pin & (1U << position);
+
+ if (iocurrent)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floting Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ /* Clear the External Interrupt or Event for the current IO */
+
+ tmp = SYSCFG->EXTICR[position >> 2];
+ tmp &= ((0x0FU) << (4U * (position & 0x03U)));
+ if(tmp == (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U))))
+ {
+ tmp = (0x0FU) << (4U * (position & 0x03U));
+ SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+
+ position++;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read the specified input port pin.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Set or clear the selected data port bit.
+ *
+ * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ *
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if(PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BRR = (uint32_t)GPIO_Pin;
+ }
+}
+
+/**
+ * @brief Toggle the specified GPIO pin.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the pin to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+* @brief Lock GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the port bits to be locked.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15U-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15U-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15U-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Handle EXTI interrupt request.
+ * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callback.
+ * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(GPIO_Pin);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c
new file mode 100644
index 00000000..7328bf6c
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c
@@ -0,0 +1,4868 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c.c
+ * @author MCD Application Team
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API:
+ (##) Enable the I2Cx interface clock
+ (##) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx channel
+ (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx channel
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+
+ *** Interrupt mode IO sequential operation ***
+ ==============================================
+ [..]
+ (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ [..]
+ (+) A specific option field manage the different steps of a sequential transfer
+ (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition
+ (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition, an then permit a call the same master sequential interface
+ several times (like HAL_I2C_Master_Sequential_Transmit_IT() then HAL_I2C_Master_Sequential_Transmit_IT())
+ (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and without a final stop condition in both cases
+ (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and with a final stop condition in both cases
+
+ (+) Differents sequential I2C interfaces are listed below:
+ (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT()
+ (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ListenCpltCallback()
+ (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode
+ (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup I2C_Private_Define I2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */
+#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE 255U
+#define SlaveAddr_SHIFT 7U
+#define SlaveAddr_MSK 0x06U
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define I2C_XFER_TX_IT (0x00000001U)
+#define I2C_XFER_RX_IT (0x00000002U)
+#define I2C_XFER_LISTEN_IT (0x00000004U)
+
+#define I2C_XFER_ERROR_IT (0x00000011U)
+#define I2C_XFER_CPLT_IT (0x00000012U)
+#define I2C_XFER_RELOAD_IT (0x00000012U)
+
+/* Private define Sequential Transfer Options default/reset value */
+#define I2C_NO_OPTION_FRAME (0xFFFF0000U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) ((((__HANDLE__)->State) == HAL_I2C_STATE_BUSY_TX) ? \
+ ((uint32_t)((__HANDLE__)->hdmatx->Instance->CNDTR)) : \
+ ((uint32_t)((__HANDLE__)->hdmarx->Instance->CNDTR)))
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+
+/* Private functions to flush TXDR register */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
+
+/* Private functions to handle start, restart or stop a transfer */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ deinitialize the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and initialize the associated handle.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if (hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2c->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Disable Own Address1 before set the Own Address1 configuration */
+ hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+
+ /* Configure I2Cx: Own Address1 and ack own address1 mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+ }
+ else /* I2C_ADDRESSINGMODE_10BIT */
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+ }
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Addressing Master mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Disable Own Address2 before set the Own Address2 configuration */
+ hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
+
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the I2C peripheral.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Store Last receive data if any */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ __IO uint32_t I2C_Trials = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && (hi2c->State != HAL_I2C_STATE_TIMEOUT))
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (I2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+ }
+ while (I2C_Trials < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt.
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_WRITE;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If size > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to write */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_READ;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to read */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave RX state to TX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave TX state to RX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Enable the Address Match interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Disable the Address Match interrupt */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master I2C IT or DMA process communication with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+ if (hi2c->Mode == HAL_I2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Set State at HAL_I2C_STATE_ABORT */
+ hi2c->State = HAL_I2C_STATE_ABORT;
+
+ /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ /* Get current IT Flags and IT sources value */
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C events treatment -------------------------------------*/
+ if (hi2c->XferISR != NULL)
+ {
+ hi2c->XferISR(hi2c, itflags, itsources);
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C Bus error interrupt occurred ------------------------------------*/
+ if (((itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if (((itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if (((itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if ((hi2c->ErrorCode & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE)
+ {
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterRxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION
+ * @param AddrMatchCode Address Match Code
+ * @retval None
+ */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AddrCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ListenCpltCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C abort callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @brief Peripheral State, Mode and Error functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2C handle state.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ /* Return I2C handle state */
+ return hi2c->State;
+}
+
+/**
+ * @brief Returns the I2C Master, Slave, Memory or no mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL mode
+ */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->Mode;
+}
+
+/**
+* @brief Return the I2C error code.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ /* Error callback will be send during stop flag treatment */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ else
+ {
+ /* Call TxCpltCallback() if no stop mode is set */
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_TC) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if (hi2c->XferCount == 0U)
+ {
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Generate a stop condition in case of no transfer option */
+ if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ else
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TC flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if (hi2c->XferCount == 0U)
+ {
+ if (((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_LAST_FRAME)) && \
+ (hi2c->State == HAL_I2C_STATE_LISTEN))
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ else if ((hi2c->XferOptions != I2C_NO_OPTION_FRAME) && (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ if (hi2c->XferCount > 0U)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+
+ if ((hi2c->XferCount == 0U) && \
+ (hi2c->XferOptions != I2C_NO_OPTION_FRAME))
+ {
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ I2C_ITAddrCplt(hi2c, ITFlags);
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if (hi2c->XferCount > 0U)
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+ }
+ else
+ {
+ if ((hi2c->XferOptions == I2C_NEXT_FRAME) || (hi2c->XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ }
+
+ /* Check if STOPF is set */
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* No need to generate STOP, it is automatically done */
+ /* But enable STOP interrupt, to treat it */
+ /* Error callback will be send during stop flag treatment */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ /* Disable TC interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
+
+ if (hi2c->XferCount != 0U)
+ {
+ /* Recover Slave address */
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Prepare the new XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Set the new XferSize in Nbytes register */
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Enable DMA Request */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0 */
+ /* So clear Flag NACKF only */
+ if (I2C_GET_DMA_REMAIN_DATA(hi2c) == 0U)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C Address complete process callback.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ uint8_t transferdirection = 0U;
+ uint16_t slaveaddrcode = 0U;
+ uint16_t ownadd1code = 0U;
+ uint16_t ownadd2code = 0U;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ITFlags);
+
+ /* In case of Listen state, need to inform upper layer of address match code event */
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ transferdirection = I2C_GET_DIR(hi2c);
+ slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c);
+ ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c);
+ ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c);
+
+ /* If 10bits addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ {
+ slaveaddrcode = ownadd1code;
+ hi2c->AddrEventCount++;
+ if (hi2c->AddrEventCount == 2U)
+ {
+ /* Reset Address Event counter */
+ hi2c->AddrEventCount = 0U;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ else
+ {
+ slaveaddrcode = ownadd2code;
+
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* else 7 bits addressing mode is selected */
+ else
+ {
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* Else clear address flag only */
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Slave sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Reset handle parameters */
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if ((ITFlags & I2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set acknowledge error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if ((hi2c->ErrorCode != HAL_I2C_ERROR_NONE) || (hi2c->State == HAL_I2C_STATE_ABORT))
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_TX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief I2C Slave complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* If a DMA is ongoing, Update handle size context */
+ if (((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) ||
+ ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN))
+ {
+ hi2c->XferCount = I2C_GET_DMA_REMAIN_DATA(hi2c);
+ }
+
+ /* All data are not transferred, so set error code accordingly */
+ if (hi2c->XferCount != 0U)
+ {
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ }
+ else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Rx Complete callback */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Tx Complete callback */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Listen complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Reset handle parameters */
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ /* Disable all Interrupts*/
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+}
+
+/**
+ * @brief I2C interrupts error process.
+ * @param hi2c I2C handle.
+ * @param ErrorCode Error code to handle.
+ * @retval None
+ */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
+{
+ /* Reset handle parameters */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferCount = 0U;
+
+ /* Set new error code */
+ hi2c->ErrorCode |= ErrorCode;
+
+ /* Disable Interrupts */
+ if ((hi2c->State == HAL_I2C_STATE_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Disable all interrupts, except interrupts related to LISTEN state */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* keep HAL_I2C_STATE_LISTEN if set */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+ }
+ else
+ {
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* If state is an abort treatment on goind, don't change state */
+ /* This change will be do later */
+ if (hi2c->State != HAL_I2C_STATE_ABORT)
+ {
+ /* Set HAL_I2C_STATE_READY */
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ }
+
+ /* Abort DMA TX transfer if any */
+ if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA TX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+ }
+ }
+ /* Abort DMA RX transfer if any */
+ else if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA RX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+ hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+ }
+ }
+ else if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Tx data register flush process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c)
+{
+ /* If a pending TXIS flag is set */
+ /* Write a dummy data in TXDR to clear it */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET)
+ {
+ hi2c->Instance->TXDR = 0x00U;
+ }
+
+ /* Flush TX register if not empty */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+ {
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+ }
+}
+
+/**
+ * @brief DMA I2C master transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C master receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+}
+
+/**
+ * @brief DMA I2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Reset AbortCpltCallback */
+ hi2c->hdmatx->XferAbortCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Flag Specifies the I2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check if a STOPF is detected */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hi2c I2C handle.
+ * @param DevAddress Specifies the slave address to be programmed.
+ * @param Size Specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_RELOAD_MODE Enable Reload mode .
+ * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode.
+ * @arg @ref I2C_SOFTEND_MODE Enable Software end mode.
+ * @param Request New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition.
+ * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+ * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request.
+ * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
+ * @retval None
+ */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* Get the CR2 register value */
+ tmpreg = hi2c->Instance->CR2;
+
+ /* clear tmpreg specific bits */
+ tmpreg &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP));
+
+ /* update tmpreg */
+ tmpreg |= (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << 16) & I2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request);
+
+ /* update CR2 register */
+ hi2c->Instance->CR2 = tmpreg;
+}
+
+/**
+ * @brief Manage the enabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
+ (hi2c->XferISR == I2C_Slave_ISR_DMA))
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+ }
+ else
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK, and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of I2C interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_I2C_ENABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Manage the disabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Disable TC and TXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_TXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Disable TC and RXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_RXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Disable ADDR, NACK and STOP interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_I2C_DISABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c
new file mode 100644
index 00000000..e58a72eb
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c
@@ -0,0 +1,349 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @brief I2C Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F3xx
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable wakeup from Stop mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter and Wake Up Feature
+ (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+ (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+ (#) Configure the enable or disable of I2C Wake Up Mode using the functions :
+ (++) HAL_I2CEx_EnableWakeUp()
+ (++) HAL_I2CEx_DisableWakeUp()
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_I2CEx_EnableFastModePlus()
+ (++) HAL_I2CEx_DisableFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx
+ * @brief I2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+ (+) Configure Wake Up Feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure I2C Analog noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter New state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure I2C Digital noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->CR1;
+
+ /* Reset I2Cx DNF bits [11:8] */
+ tmpreg &= ~(I2C_CR1_DNF);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8U;
+
+ /* Store the new register value */
+ hi2c->Instance->CR1 = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable I2C wakeup from stop mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Enable wakeup from stop mode */
+ hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable I2C wakeup from stop mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Enable wakeup from stop mode */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be enabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be disabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pcd.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pcd.c
new file mode 100644
index 00000000..f8b6ccb0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pcd.c
@@ -0,0 +1,1336 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd.c
+ * @author MCD Application Team
+ * @brief PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The PCD HAL driver can be used as follows:
+
+ (#) Declare a PCD_HandleTypeDef handle structure, for example:
+ PCD_HandleTypeDef hpcd;
+
+ (#) Fill parameters of Init structure in HCD handle
+
+ (#) Call HAL_PCD_Init() API to initialize the HCD peripheral (Core, Device core, ...)
+
+ (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+ (##) Enable the PCD/USB Low Level interface clock using
+ (+++) __HAL_RCC_USB_CLK_ENABLE();
+
+ (##) Initialize the related GPIO clocks
+ (##) Configure PCD pin-out
+ (##) Configure PCD NVIC interrupt
+
+ (#)Associate the Upper USB device stack to the HAL PCD Driver:
+ (##) hpcd.pData = pdev;
+
+ (#)Enable HCD transmission and reception:
+ (##) HAL_PCD_Start();
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCD PCD
+ * @brief PCD HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup PCD_Private_Define PCD Private Define
+ * @{
+ */
+#define BTABLE_ADDRESS (0x000U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the PCD according to the specified
+ * parameters in the PCD_InitTypeDef and create the associated handle.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{
+ uint32_t i = 0U;
+
+ uint32_t wInterrupt_Mask = 0U;
+
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+ if(hpcd->State == HAL_PCD_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hpcd->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_PCD_MspInit(hpcd);
+ }
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Init endpoints structures */
+ for (i = 0U; i < hpcd->Init.dev_endpoints ; i++)
+ {
+ /* Init ep structure */
+ hpcd->IN_ep[i].is_in = 1U;
+ hpcd->IN_ep[i].num = i;
+ /* Control until ep is actvated */
+ hpcd->IN_ep[i].type = PCD_EP_TYPE_CTRL;
+ hpcd->IN_ep[i].maxpacket = 0U;
+ hpcd->IN_ep[i].xfer_buff = 0U;
+ hpcd->IN_ep[i].xfer_len = 0U;
+ }
+
+ for (i = 0U; i < hpcd->Init.dev_endpoints ; i++)
+ {
+ hpcd->OUT_ep[i].is_in = 0U;
+ hpcd->OUT_ep[i].num = i;
+ /* Control until ep is activated */
+ hpcd->OUT_ep[i].type = PCD_EP_TYPE_CTRL;
+ hpcd->OUT_ep[i].maxpacket = 0U;
+ hpcd->OUT_ep[i].xfer_buff = 0U;
+ hpcd->OUT_ep[i].xfer_len = 0U;
+ }
+
+ /* Init Device */
+ /*CNTR_FRES = 1U*/
+ hpcd->Instance->CNTR = USB_CNTR_FRES;
+
+ /*CNTR_FRES = 0U*/
+ hpcd->Instance->CNTR = 0U;
+
+ /*Clear pending interrupts*/
+ hpcd->Instance->ISTR = 0U;
+
+ /*Set Btable Adress*/
+ hpcd->Instance->BTABLE = BTABLE_ADDRESS;
+
+ /*set wInterrupt_Mask global variable*/
+ wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
+ | USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_RESETM;
+
+ /*Set interrupt mask*/
+ hpcd->Instance->CNTR = wInterrupt_Mask;
+
+ hpcd->USB_Address = 0U;
+ hpcd->State= HAL_PCD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the PCD peripheral
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Check the PCD handle allocation */
+ if(hpcd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ hpcd->State = HAL_PCD_STATE_BUSY;
+
+ /* Stop Device */
+ HAL_PCD_Stop(hpcd);
+
+ /* DeInit the low level hardware */
+ HAL_PCD_MspDeInit(hpcd);
+
+ hpcd->State = HAL_PCD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the PCD MSP.
+ * @param hpcd PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes PCD MSP.
+ * @param hpcd PCD handle
+ * @retval None
+ */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the USB device.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{
+ /* DP Pull-Down is external */
+ HAL_PCDEx_SetConnectionState (hpcd, 1U);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the USB device.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+
+ /* disable all interrupts and force USB reset */
+ hpcd->Instance->CNTR = USB_CNTR_FRES;
+
+ /* clear interrupt status register */
+ hpcd->Instance->ISTR = 0U;
+
+ /* switch-off device */
+ hpcd->Instance->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN);
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Private_Functions PCD Private Functions
+ * @{
+ */
+/**
+ * @brief This function handles PCD Endpoint interrupt request.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd)
+{
+ PCD_EPTypeDef *ep;
+ uint16_t count=0U;
+ uint8_t EPindex;
+ __IO uint16_t wIstr;
+ __IO uint16_t wEPVal = 0U;
+
+ /* stay in loop while pending interrupts */
+ while (((wIstr = hpcd->Instance->ISTR) & USB_ISTR_CTR) != 0U)
+ {
+ /* extract highest priority endpoint number */
+ EPindex = (uint8_t)(wIstr & USB_ISTR_EP_ID);
+
+ if (EPindex == 0U)
+ {
+ /* Decode and service control endpoint interrupt */
+
+ /* DIR bit = origin of the interrupt */
+ if ((wIstr & USB_ISTR_DIR) == 0U)
+ {
+ /* DIR = 0U */
+
+ /* DIR = 0 => IN int */
+ /* DIR = 0 implies that (EP_CTR_TX = 1U) always */
+ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0);
+ ep = &hpcd->IN_ep[0];
+
+ ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
+ ep->xfer_buff += ep->xfer_count;
+
+ /* TX COMPLETE */
+ HAL_PCD_DataInStageCallback(hpcd, 0U);
+
+
+ if((hpcd->USB_Address > 0U)&& ( ep->xfer_len == 0U))
+ {
+ hpcd->Instance->DADDR = (hpcd->USB_Address | USB_DADDR_EF);
+ hpcd->USB_Address = 0U;
+ }
+
+ }
+ else
+ {
+ /* DIR = 1U */
+
+ /* DIR = 1U & CTR_RX => SETUP or OUT int */
+ /* DIR = 1U & (CTR_TX | CTR_RX) => 2 int pending */
+ ep = &hpcd->OUT_ep[0];
+ wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0);
+
+ if ((wEPVal & USB_EP_SETUP) != 0U)
+ {
+ /* Get SETUP Packet*/
+ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
+ PCD_ReadPMA(hpcd->Instance, (uint8_t*)(void*)hpcd->Setup ,ep->pmaadress , ep->xfer_count);
+ /* SETUP bit kept frozen while CTR_RX = 1U*/
+ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0);
+
+ /* Process SETUP Packet*/
+ HAL_PCD_SetupStageCallback(hpcd);
+ }
+
+ else if ((wEPVal & USB_EP_CTR_RX) != 0U)
+ {
+ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0);
+ /* Get Control Data OUT Packet*/
+ ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
+
+ if (ep->xfer_count != 0U)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count);
+ ep->xfer_buff+=ep->xfer_count;
+ }
+
+ /* Process Control Data OUT Packet*/
+ HAL_PCD_DataOutStageCallback(hpcd, 0U);
+
+ PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket)
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID)
+ }
+ }
+ }
+ else
+ {
+
+ /* Decode and service non control endpoints interrupt */
+
+ /* process related endpoint register */
+ wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, EPindex);
+ if ((wEPVal & USB_EP_CTR_RX) != 0U)
+ {
+ /* clear int flag */
+ PCD_CLEAR_RX_EP_CTR(hpcd->Instance, EPindex);
+ ep = &hpcd->OUT_ep[EPindex];
+
+ /* OUT double Buffering*/
+ if (ep->doublebuffer == 0U)
+ {
+ count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
+ if (count != 0U)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count);
+ }
+ }
+ else
+ {
+ if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num)& USB_EP_DTOG_RX) == USB_EP_DTOG_RX)
+ {
+ /*read from endpoint BUF0Addr buffer*/
+ count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num);
+ if (count != 0U)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count);
+ }
+ }
+ else
+ {
+ /*read from endpoint BUF1Addr buffer*/
+ count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num);
+ if (count != 0U)
+ {
+ PCD_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count);
+ }
+ }
+ PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_OUT)
+ }
+ /*multi-packet on the NON control OUT endpoint*/
+ ep->xfer_count+=count;
+ ep->xfer_buff+=count;
+
+ if ((ep->xfer_len == 0U) || (count < ep->maxpacket))
+ {
+ /* RX COMPLETE */
+ HAL_PCD_DataOutStageCallback(hpcd, ep->num);
+ }
+ else
+ {
+ HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len);
+ }
+
+ } /* if((wEPVal & EP_CTR_RX) */
+
+ if ((wEPVal & USB_EP_CTR_TX) != 0U)
+ {
+ ep = &hpcd->IN_ep[EPindex];
+
+ /* clear int flag */
+ PCD_CLEAR_TX_EP_CTR(hpcd->Instance, EPindex);
+
+ /* IN double Buffering*/
+ if (ep->doublebuffer == 0U)
+ {
+ ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
+ if (ep->xfer_count != 0U)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count);
+ }
+ }
+ else
+ {
+ if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num)& USB_EP_DTOG_TX) == USB_EP_DTOG_TX)
+ {
+ /*read from endpoint BUF0Addr buffer*/
+ ep->xfer_count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num);
+ if (ep->xfer_count != 0U)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, ep->xfer_count);
+ }
+ }
+ else
+ {
+ /*read from endpoint BUF1Addr buffer*/
+ ep->xfer_count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num);
+ if (ep->xfer_count != 0U)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, ep->xfer_count);
+ }
+ }
+ PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_IN)
+ }
+ /*multi-packet on the NON control IN endpoint*/
+ ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
+ ep->xfer_buff+=ep->xfer_count;
+
+ /* Zero Length Packet? */
+ if (ep->xfer_len == 0U)
+ {
+ /* TX COMPLETE */
+ HAL_PCD_DataInStageCallback(hpcd, ep->num);
+ }
+ else
+ {
+ HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len);
+ }
+ }
+ }
+ }
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @defgroup PCD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/**
+ * @brief This function handles PCD interrupt request.
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_CTR))
+ {
+ /* servicing of the endpoint correct transfer interrupt */
+ /* clear of the CTR flag into the sub */
+ PCD_EP_ISR_Handler(hpcd);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_RESET))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET);
+ HAL_PCD_ResetCallback(hpcd);
+ HAL_PCD_SetAddress(hpcd, 0U);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_PMAOVR))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR);
+ }
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ERR))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP))
+ {
+ hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_LPMODE);
+ hpcd->Instance->CNTR &= (uint16_t) ~(USB_CNTR_FSUSP);
+
+ HAL_PCD_ResumeCallback(hpcd);
+
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SUSP))
+ {
+ /* Force low-power mode in the macrocell */
+ hpcd->Instance->CNTR |= USB_CNTR_FSUSP;
+
+ /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP);
+
+ hpcd->Instance->CNTR |= USB_CNTR_LPMODE;
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP) == 0U)
+ {
+ HAL_PCD_SuspendCallback(hpcd);
+ }
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SOF))
+ {
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF);
+ HAL_PCD_SOFCallback(hpcd);
+ }
+
+ if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ESOF))
+ {
+ /* clear ESOF flag in ISTR */
+ __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF);
+ }
+}
+
+/**
+ * @brief Data out stage callbacks
+ * @param hpcd PCD handle
+ * @param epnum endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_DataOutStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Data IN stage callbacks
+ * @param hpcd PCD handle
+ * @param epnum endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_DataInStageCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Setup stage callback
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_SetupStageCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Start Of Frame callbacks
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_SOFCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief USB Reset callbacks
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_ResetCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Suspend event callbacks
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_SuspendCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Resume event callbacks
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_ResumeCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO OUT callbacks
+ * @param hpcd PCD handle
+ * @param epnum endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Incomplete ISO IN callbacks
+ * @param hpcd PCD handle
+ * @param epnum endpoint number
+ * @retval None
+ */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(epnum);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Connection event callbacks
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_ConnectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Disconnection event callbacks
+ * @param hpcd PCD handle
+ * @retval None
+ */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_PCD_DisconnectCallback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the PCD data
+ transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Connect the USB device
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+
+ /* Enabling DP Pull-Down bit to Connect internal pull-up on USB DP line */
+ HAL_PCDEx_SetConnectionState(hpcd, 1U);
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Disconnect the USB device
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+ __HAL_LOCK(hpcd);
+
+ /* Disable DP Pull-Down bit*/
+ HAL_PCDEx_SetConnectionState(hpcd, 0U);
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the USB Device address
+ * @param hpcd PCD handle
+ * @param address new device address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+ __HAL_LOCK(hpcd);
+
+ if(address == 0U)
+ {
+ /* set device address and enable function */
+ hpcd->Instance->DADDR = USB_DADDR_EF;
+ }
+ else /* USB Address will be applied later */
+ {
+ hpcd->USB_Address = address;
+ }
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+/**
+ * @brief Open and configure an endpoint
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @param ep_mps endpoint max packet size
+ * @param ep_type endpoint type
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+ HAL_StatusTypeDef ret = HAL_OK;
+ PCD_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7FU];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+ ep->maxpacket = ep_mps;
+ ep->type = ep_type;
+
+ __HAL_LOCK(hpcd);
+
+ /* initialize Endpoint */
+ switch (ep->type)
+ {
+ case PCD_EP_TYPE_CTRL:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_CONTROL);
+ break;
+ case PCD_EP_TYPE_BULK:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_BULK);
+ break;
+ case PCD_EP_TYPE_INTR:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_INTERRUPT);
+ break;
+ case PCD_EP_TYPE_ISOC:
+ PCD_SET_EPTYPE(hpcd->Instance, ep->num, USB_EP_ISOCHRONOUS);
+ break;
+ default:
+ break;
+ }
+
+ PCD_SET_EP_ADDRESS(hpcd->Instance, ep->num, ep->num);
+
+ if (ep->doublebuffer == 0U)
+ {
+ if (ep->is_in)
+ {
+ /*Set the endpoint Transmit buffer address */
+ PCD_SET_EP_TX_ADDRESS(hpcd->Instance, ep->num, ep->pmaadress);
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+ /* Configure NAK status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_NAK)
+ }
+ else
+ {
+ /*Set the endpoint Receive buffer address */
+ PCD_SET_EP_RX_ADDRESS(hpcd->Instance, ep->num, ep->pmaadress);
+ /*Set the endpoint Receive buffer counter*/
+ PCD_SET_EP_RX_CNT(hpcd->Instance, ep->num, ep->maxpacket)
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ /* Configure VALID status for the Endpoint*/
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID)
+ }
+ }
+ /*Double Buffer*/
+ else
+ {
+ /*Set the endpoint as double buffered*/
+ PCD_SET_EP_DBUF(hpcd->Instance, ep->num);
+ /*Set buffer address for double buffered mode*/
+ PCD_SET_EP_DBUF_ADDR(hpcd->Instance, ep->num,ep->pmaaddr0, ep->pmaaddr1)
+
+ if (ep->is_in==0U)
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+
+ /* Reset value of the data toggle bits for the endpoint out*/
+ PCD_TX_DTOG(hpcd->Instance, ep->num);
+
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID)
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS)
+ }
+ else
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+ PCD_RX_DTOG(hpcd->Instance, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS)
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS)
+ }
+ }
+
+ __HAL_UNLOCK(hpcd);
+ return ret;
+}
+
+
+/**
+ * @brief Deactivate an endpoint
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ PCD_EPTypeDef *ep;
+
+ if ((ep_addr & 0x80U) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+ }
+ ep->num = ep_addr & 0x7FU;
+
+ ep->is_in = (0x80U & ep_addr) != 0U;
+
+ __HAL_LOCK(hpcd);
+
+ if (ep->doublebuffer == 0U)
+ {
+ if (ep->is_in)
+ {
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS)
+ }
+ else
+ {
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS)
+ }
+ }
+ /*Double Buffer*/
+ else
+ {
+ if (ep->is_in==0U)
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+
+ /* Reset value of the data toggle bits for the endpoint out*/
+ PCD_TX_DTOG(hpcd->Instance, ep->num);
+
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS)
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS)
+ }
+ else
+ {
+ /* Clear the data toggle bits for the endpoint IN/OUT*/
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+ PCD_RX_DTOG(hpcd->Instance, ep->num);
+ /* Configure DISABLE status for the Endpoint*/
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_DIS)
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_DIS)
+ }
+ }
+
+ __HAL_UNLOCK(hpcd);
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Receive an amount of data
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @param pBuf pointer to the reception buffer
+ * @param len amount of data to be received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+
+ PCD_EPTypeDef *ep;
+
+ ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 0U;
+ ep->num = ep_addr & 0x7FU;
+
+ /* Multi packet transfer*/
+ if (ep->xfer_len > ep->maxpacket)
+ {
+ len=ep->maxpacket;
+ ep->xfer_len-=len;
+ }
+ else
+ {
+ len=ep->xfer_len;
+ ep->xfer_len =0U;
+ }
+
+ /* configure and validate Rx endpoint */
+ if (ep->doublebuffer == 0U)
+ {
+ /*Set RX buffer count*/
+ PCD_SET_EP_RX_CNT(hpcd->Instance, ep->num, len)
+ }
+ else
+ {
+ /*Set the Double buffer counter*/
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, len)
+ }
+
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID)
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get Received Data Size
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @retval Data Size
+ */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count;
+}
+/**
+ * @brief Send an amount of data
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @param pBuf pointer to the transmission buffer
+ * @param len amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+ PCD_EPTypeDef *ep;
+ uint16_t pmabuffer = 0U;
+
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+
+ /*setup and start the Xfer */
+ ep->xfer_buff = pBuf;
+ ep->xfer_len = len;
+ ep->xfer_count = 0U;
+ ep->is_in = 1U;
+ ep->num = ep_addr & 0x7FU;
+
+ /*Multi packet transfer*/
+ if (ep->xfer_len > ep->maxpacket)
+ {
+ len=ep->maxpacket;
+ ep->xfer_len-=len;
+ }
+ else
+ {
+ len=ep->xfer_len;
+ ep->xfer_len =0U;
+ }
+
+ /* configure and validate Tx endpoint */
+ if (ep->doublebuffer == 0U)
+ {
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, len);
+ PCD_SET_EP_TX_CNT(hpcd->Instance, ep->num, len);
+ }
+ else
+ {
+ /*Write the data to the USB endpoint*/
+ if ((PCD_GET_ENDPOINT(hpcd->Instance, ep->num)& USB_EP_DTOG_TX) == USB_EP_DTOG_TX)
+ {
+ pmabuffer = ep->pmaaddr1;
+ }
+ else
+ {
+ pmabuffer = ep->pmaaddr0;
+ }
+ PCD_WritePMA(hpcd->Instance, ep->xfer_buff, pmabuffer, len);
+ PCD_FreeUserBuffer(hpcd->Instance, ep->num, ep->is_in)
+ }
+
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID)
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set a STALL condition over an endpoint
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ PCD_EPTypeDef *ep;
+
+ __HAL_LOCK(hpcd);
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 1U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+ if (ep->num == 0U)
+ {
+ /* This macro sets STALL status for RX & TX*/
+ PCD_SET_EP_TXRX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL)
+ }
+ else
+ {
+ if (ep->is_in)
+ {
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num , USB_EP_TX_STALL)
+ }
+ else
+ {
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num , USB_EP_RX_STALL)
+ }
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Clear a STALL condition over in an endpoint
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ PCD_EPTypeDef *ep;
+
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7F];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ ep->is_stall = 0U;
+ ep->num = ep_addr & 0x7FU;
+ ep->is_in = ((ep_addr & 0x80U) == 0x80U);
+
+ __HAL_LOCK(hpcd);
+
+ if (ep->is_in)
+ {
+ PCD_CLEAR_TX_DTOG(hpcd->Instance, ep->num)
+ PCD_SET_EP_TX_STATUS(hpcd->Instance, ep->num, USB_EP_TX_VALID)
+ }
+ else
+ {
+ PCD_CLEAR_RX_DTOG(hpcd->Instance, ep->num)
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_VALID)
+ }
+ __HAL_UNLOCK(hpcd);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Flush an endpoint
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCD_ActivateRemoteWakeup : active remote wakeup signalling
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ hpcd->Instance->CNTR |= USB_CNTR_RESUME;
+ return HAL_OK;
+}
+
+/**
+ * @brief HAL_PCD_DeActivateRemoteWakeup : de-active remote wakeup signalling
+ * @param hpcd PCD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+ hpcd->Instance->CNTR &=~((uint32_t)USB_CNTR_RESUME);
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the PCD state
+ * @param hpcd PCD handle
+ * @retval HAL state
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+ return hpcd->State;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pcd_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pcd_ex.c
new file mode 100644
index 00000000..9919743d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pcd_ex.c
@@ -0,0 +1,327 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd_ex.c
+ * @author MCD Application Team
+ * @brief Extended PCD HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the USB Peripheral Controller:
+ * + Configuration of the PMA for EP
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PCDEx PCDEx
+ * @brief PCD Extended HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @brief PCDEx control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Update PMA configuration
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure PMA for EP
+ * @param hpcd PCD handle
+ * @param ep_addr endpoint address
+ * @param ep_kind endpoint Kind
+ * @arg USB_SNG_BUF: Single Buffer used
+ * @arg USB_DBL_BUF: Double Buffer used
+ * @param pmaadress EP address in The PMA: In case of single buffer endpoint
+ * this parameter is 16-bit value providing the address
+ * in PMA allocated to endpoint.
+ * In case of double buffer endpoint this parameter
+ * is a 32-bit value providing the endpoint buffer 0 address
+ * in the LSB part of 32-bit value and endpoint buffer 1 address
+ * in the MSB part of 32-bit value.
+ * @retval : status
+ */
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress)
+
+{
+ PCD_EPTypeDef *ep;
+
+ /* initialize ep structure*/
+ if ((0x80U & ep_addr) == 0x80U)
+ {
+ ep = &hpcd->IN_ep[ep_addr & 0x7FU];
+ }
+ else
+ {
+ ep = &hpcd->OUT_ep[ep_addr];
+ }
+
+ /* Here we check if the endpoint is single or double Buffer*/
+ if (ep_kind == PCD_SNG_BUF)
+ {
+ /*Single Buffer*/
+ ep->doublebuffer = 0U;
+ /*Configure the PMA*/
+ ep->pmaadress = (uint16_t)pmaadress;
+ }
+ else /*USB_DBL_BUF*/
+ {
+ /*Double Buffer Endpoint*/
+ ep->doublebuffer = 1;
+ /*Configure the PMA*/
+ ep->pmaaddr0 = pmaadress & 0xFFFFU;
+ ep->pmaaddr1 = (pmaadress & 0xFFFF0000U) >> 16U;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PCDEx_Private_Functions PCD Extended Private Functions
+ * @{
+ */
+#if defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || \
+ defined(STM32F373xC) || defined(STM32F378xx) || \
+ defined(STM32F302xC)
+
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx: USB peripheral instance register address.
+ * @param pbUsrBuf: pointer to user memory area.
+ * @param wPMABufAddr: address into PMA.
+ * @param wNBytes: no. of bytes to be copied.
+ * @retval None
+ */
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = ((uint32_t)((uint32_t)wNBytes + 1U)) >> 1U;
+
+ uint32_t i, temp1, temp2;
+ uint16_t *pdwVal;
+ pdwVal = (uint16_t *)((uint32_t)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400U));
+
+ for (i = n; i != 0; i--)
+ {
+ temp1 = (uint16_t) * pbUsrBuf;
+ pbUsrBuf++;
+ temp2 = temp1 | ((uint16_t)((uint16_t) * pbUsrBuf << 8U)) ;
+ *pdwVal++ = temp2;
+ pdwVal++;
+ pbUsrBuf++;
+ }
+}
+
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx: USB peripheral instance register address.
+ * @param pbUsrBuf: pointer to user memory area.
+ * @param wPMABufAddr: address into PMA.
+ * @param wNBytes: no. of bytes to be copied.
+ * @retval None
+ */
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = (uint32_t)wNBytes >> 1U;
+ uint32_t i;
+ uint16_t *pdwVal;
+ uint32_t temp;
+ pdwVal = (uint16_t *)((uint32_t)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400U));
+
+ for (i = n; i != 0U; i--)
+ {
+ temp = *pdwVal++;
+ *pbUsrBuf++ = ((temp >> 0) & 0xFF);
+ *pbUsrBuf++ = ((temp >> 8) & 0xFF);
+ pdwVal++;
+ }
+
+ if (wNBytes % 2)
+ {
+ temp = *pdwVal++;
+ *pbUsrBuf++ = ((temp >> 0) & 0xFF);
+ }
+}
+#endif /* STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302x8)
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx: USB peripheral instance register address.
+ * @param pbUsrBuf: pointer to user memory area.
+ * @param wPMABufAddr: address into PMA.
+ * @param wNBytes: no. of bytes to be copied.
+ * @retval None
+ */
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = ((uint32_t)((uint32_t)wNBytes + 1U)) >> 1U;
+ uint32_t i;
+ uint16_t temp1, temp2;
+ uint16_t *pdwVal;
+ pdwVal = (uint16_t *)((uint32_t)(wPMABufAddr + (uint32_t)USBx + 0x400U));
+ for (i = n; i != 0U; i--)
+ {
+ temp1 = (uint16_t) * pbUsrBuf;
+ pbUsrBuf++;
+ temp2 = temp1 | ((uint16_t)((uint16_t) * pbUsrBuf << 8U)) ;
+ *pdwVal++ = temp2;
+ pbUsrBuf++;
+ }
+}
+
+/**
+ * @brief Copy a buffer from user memory area to packet memory area (PMA)
+ * @param USBx: USB peripheral instance register address.
+ * @param pbUsrBuf: pointer to user memory area.
+ * @param wPMABufAddr: address into PMA.
+ * @param wNBytes: no. of bytes to be copied.
+ * @retval None
+ */
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
+{
+ uint32_t n = (uint32_t)wNBytes >> 1U;
+ uint32_t i;
+ uint16_t *pdwVal;
+ uint32_t temp;
+ pdwVal = (uint16_t *)((uint32_t)(wPMABufAddr + (uint32_t)USBx + 0x400U));
+
+ for (i = n; i != 0U; i--)
+ {
+ temp = *pdwVal++;
+ *pbUsrBuf++ = ((temp >> 0) & 0xFF);
+ *pbUsrBuf++ = ((temp >> 8) & 0xFF);
+ }
+
+ if (wNBytes % 2)
+ {
+ temp = *pdwVal++;
+ *pbUsrBuf++ = ((temp >> 0) & 0xFF);
+ }
+}
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || */
+ /* STM32F302x8 */
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PCDEx_Exported_Functions_Group2 Extended Initialization and de-initialization functions
+ * @{
+ */
+/**
+ * @brief Software Device Connection
+ * @param hpcd PCD handle
+ * @param state Device state
+ * @retval None
+ */
+ __weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hpcd);
+ UNUSED(state);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PCDEx_SetConnectionState could be implenetd in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c
new file mode 100644
index 00000000..15599cf0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c
@@ -0,0 +1,477 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr.c
+ * @author MCD Application Team
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __HAL_RCC_PWR_FORCE_RESET();
+ __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 32 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 32 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** WakeUp pin configuration ***
+ ================================
+ [..]
+ (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is
+ forced in input pull down configuration and is active on rising edges.
+ (+) There are up to three WakeUp pins:
+ (++)WakeUp Pin 1 on PA.00.
+ (++)WakeUp Pin 2 on PC.13 (STM32F303xC, STM32F303xE only).
+ (++)WakeUp Pin 3 on PE.06.
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ Refer to the datasheets for more details.
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off (mode not available on STM32F3x8 devices).
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ (+) Exit:
+ (++) Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode to minimize the consumption.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI )
+ function with:
+ (++) Main regulator ON or
+ (++) Low Power regulator ON.
+ (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction or
+ (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction
+ (+) Exit:
+ (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+ (++) Some specific communication peripherals (CEC, USART, I2C) interrupts,
+ when programmed in wakeup mode (the peripheral must be
+ programmed in wakeup mode and the corresponding interrupt vector
+ must be enabled in the NVIC).
+
+ *** Standby mode ***
+ ====================
+ [..]
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
+ The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers, backup SRAM and Standby
+ circuitry.
+ The voltage regulator is OFF.
+
+ (+) Entry:
+ (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (+) Exit:
+ (++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup,
+ tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wakeup (AWU) from low-power mode ***
+ =============================================
+ [..]
+ The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wakeup event, a tamper event, a time-stamp event, or a comparator event,
+ without depending on an external interrupt (Auto-wakeup mode).
+
+ (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+ configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function.
+
+ (+) Comparator auto-wakeup (AWU) from the Stop mode
+
+ (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to:
+ (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2U)
+ to be sensitive to to the selected edges (falling, rising or falling
+ and rising) (Interrupt or Event modes) using the EXTI_Init() function.
+ (+++) Configure the comparator to generate the event.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the WakeUp PINx functionality.
+ * @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
+ * This parameter can be value of :
+ * @ref PWR_WakeUp_Pins
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+ /* Enable the EWUPx pin */
+ SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Disables the WakeUp PINx functionality.
+ * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
+ * This parameter can be values of :
+ * @ref PWR_WakeUp_Pins
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+ /* Disable the EWUPx pin */
+ CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ * @param Regulator Specifies the regulator state in SLEEP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+ * @note This parameter has no effect in F3 family and is just maintained to
+ * offer full portability of other STM32 families softwares.
+ * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction.
+ * When WFI entry is used, tick interrupt have to be disabled if not desired as
+ * the interrupt wake up source.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters STOP mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator Specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON
+ * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg = PWR->CR;
+
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS);
+
+ /* Set LPDS bit according to Regulator value */
+ tmpreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR = tmpreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+}
+
+/**
+ * @brief Enters STANDBY mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available),
+ * - RTC alternate function pins if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out,
+ * - WKUP pins if enabled.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select STANDBY mode */
+ PWR->CR |= PWR_CR_PDDS;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c
new file mode 100644
index 00000000..188535e1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c
@@ -0,0 +1,288 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Extended Initialization and de-initialization functions
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWREx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWR Extended Private Constants
+ * @{
+ */
+#define PVD_MODE_IT (0x00010000U)
+#define PVD_MODE_EVT (0x00020000U)
+#define PVD_RISING_EDGE (0x00000001U)
+#define PVD_FALLING_EDGE (0x00000002U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Extended control functions #####
+ ===============================================================================
+ *** PVD configuration (present on all other devices than STM32F3x8 devices) ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro
+ (+) The PVD is stopped in Standby mode.
+ -@- PVD is not available on STM32F3x8 Product Line
+
+
+ *** Voltage regulator ***
+ =========================
+ [..]
+ (+) The voltage regulator is always enabled after Reset. It works in three different
+ modes.
+ In Run mode, the regulator supplies full power to the 1.8V domain (core, memories
+ and digital peripherals).
+ In Stop mode, the regulator supplies low power to the 1.8V domain, preserving
+ contents of registers and SRAM.
+ In Stop mode, the regulator is powered off. The contents of the registers and SRAM
+ are lost except for the Standby circuitry and the Backup Domain.
+ Note: in the STM32F3x8xx devices, the voltage regulator is bypassed and the
+ microcontroller must be powered from a nominal VDD = 1.8V +/-8U% voltage.
+
+
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro
+ (+) The PVD is stopped in Standby mode.
+
+
+ *** SDADC power configuration ***
+ ================================
+ [..]
+ (+) On STM32F373xC/STM32F378xx devices, there are up to
+ 3 SDADC instances that can be enabled/disabled.
+
+@endverbatim
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/**
+ * @brief Enables the SDADC peripheral functionaliy
+ * @param Analogx specifies the SDADC peripheral instance.
+ * This parameter can be: PWR_SDADC_ANALOG1, PWR_SDADC_ANALOG2 or PWR_SDADC_ANALOG3.
+ * @retval None
+ */
+void HAL_PWREx_EnableSDADC(uint32_t Analogx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_SDADC_ANALOG(Analogx));
+
+ /* Enable PWR clock interface for SDADC use */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ PWR->CR |= Analogx;
+}
+
+/**
+ * @brief Disables the SDADC peripheral functionaliy
+ * @param Analogx specifies the SDADC peripheral instance.
+ * This parameter can be: PWR_SDADC_ANALOG1, PWR_SDADC_ANALOG2 or PWR_SDADC_ANALOG3.
+ * @retval None
+ */
+void HAL_PWREx_DisableSDADC(uint32_t Analogx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_SDADC_ANALOG(Analogx));
+
+ PWR->CR &= ~Analogx;
+}
+
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c
new file mode 100644
index 00000000..0fa36cc9
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c
@@ -0,0 +1,1171 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc.c
+ * @author MCD Application Team
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled,
+ and all peripherals are off except internal SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses;
+ all peripherals mapped on these buses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+ [..] Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB buses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals whose clocks are not
+ derived from the System clock (RTC, ADC, I2C, I2S, TIM, USB FS)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC
+* @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+/* Bits position in in the CFGR register */
+#define RCC_CFGR_HPRE_BITNUMBER POSITION_VAL(RCC_CFGR_HPRE)
+#define RCC_CFGR_PPRE1_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE1)
+#define RCC_CFGR_PPRE2_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE2)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U,
+ 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U};
+const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U,
+ 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U};
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to configure the internal/external oscillators
+ (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1
+ and APB2).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+ The HSI clock can be used also to clock the USART and I2C peripherals.
+
+ (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI or HSE), featuring different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 72 MHz)
+ (++) The second output is used to generate the clock for the USB FS (48 MHz)
+ (++) The third output may be used to generate the clock for the ADC peripherals (up to 72 MHz)
+ (++) The fourth output may be used to generate the clock for the TIM peripherals (144 MHz)
+
+ (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clocks automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL
+ clock (divided by 2) output on pin (such as PA8 pin).
+
+ [..] System, AHB and APB buses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these buses. You can use
+ "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ (#) All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ (++) The FLASH program/erase clock which is always HSI 8MHz clock.
+ (++) The USB 48 MHz clock which is derived from the PLL VCO clock.
+ (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE.
+ (++) The I2C clock which can be derived as well from HSI 8MHz clock.
+ (++) The ADC clock which is derived from PLL output.
+ (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC
+ (HSE divided by a programmable prescaler). The System clock (SYSCLK)
+ frequency must be higher or equal to the RTC clock frequency.
+ (++) IWDG clock which is always the LSI clock.
+
+ (#) For the STM32F3xx devices, the maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 72 MHz,
+ Depending on the SYSCLK frequency, the flash latency should be adapted accordingly.
+
+ (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and
+ prefetch is disabled.
+ @endverbatim
+ * @{
+ */
+
+/*
+ Additional consideration on the SYSCLK based on Latency settings:
+ +-----------------------------------------------+
+ | Latency | SYSCLK clock frequency (MHz) |
+ |---------------|-------------------------------|
+ |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
+ |---------------|-------------------------------|
+ |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
+ |---------------|-------------------------------|
+ |2WS(3CPU cycle)| 48 < SYSCLK <= 72 |
+ +-----------------------------------------------+
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS and MCO1 OFF
+ * - All interrupts disabled
+ * @note This function does not modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit, HSITRIM[4:0] bits to the reset value*/
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0] and MCOSEL[2:0] bits */
+ CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE1 | RCC_CFGR_PPRE2 | RCC_CFGR_MCO);
+
+ /* Reset HSEON, CSSON, PLLON bits */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset CFGR2 register */
+ CLEAR_REG(RCC->CFGR2);
+
+ /* Reset CFGR3 register */
+ CLEAR_REG(RCC->CFGR3);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this macro. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(RCC_OscInitStruct != NULL);
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+
+ /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ /* Configure the HSE predivision factor --------------------------------*/
+ __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue);
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+ /* Check the HSE State */
+ if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ FlagStatus pwrclkchanged = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Update LSE configuration in Backup Domain control register */
+ /* Requires to enable write access to Backup Domain of necessary */
+ if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ {
+ __HAL_RCC_PWR_CLK_ENABLE();
+ pwrclkchanged = SET;
+ }
+
+ if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF)
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Require to disable power clock if necessary */
+ if(pwrclkchanged == SET)
+ {
+ __HAL_RCC_PWR_CLK_DISABLE();
+ }
+ }
+
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV));
+#endif
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ /* Configure the main PLL clock source, predivider and multiplication factor. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PREDIV,
+ RCC_OscInitStruct->PLL.PLLMUL);
+#else
+ /* Configure the main PLL clock source and multiplication factor. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLMUL);
+#endif /* RCC_CFGR_PLLSRC_HSI_PREDIV */
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB buses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * start-up from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after start-up delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is
+ * currently used as system clock source.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(RCC_ClkInitStruct != NULL);
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) of the device. */
+
+ /* Increasing the number of wait states because of higher CPU frequency */
+ if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /*-------------------------- PCLK2 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
+ }
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+ @endverbatim
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @note MCO pin should be configured in alternate function mode.
+ * @param RCC_MCOx specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
+ * @param RCC_MCOSource specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param RCC_MCODiv specifies the MCO DIV.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 no division applied to MCO clock
+ * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock
+ * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock
+ * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock
+ * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock
+ * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock
+ * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock
+ * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock
+ * @retval None
+ */
+#else
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @note MCO pin should be configured in alternate function mode.
+ * @param RCC_MCOx specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
+ * @param RCC_MCOSource specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param RCC_MCODiv specifies the MCO DIV.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 no division applied to MCO clock
+ * @retval None
+ */
+#endif
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef gpio;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+ /* Configure the MCO1 pin in alternate function mode */
+ gpio.Mode = GPIO_MODE_AF_PP;
+ gpio.Speed = GPIO_SPEED_FREQ_HIGH;
+ gpio.Pull = GPIO_NOPULL;
+ gpio.Pin = MCO1_PIN;
+ gpio.Alternate = GPIO_AF0_MCO;
+
+ /* MCO1 Clock Enable */
+ MCO1_CLK_ENABLE();
+
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio);
+
+ /* Configure the MCO clock source */
+ __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv);
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**)
+ * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**) or HSI_VALUE(*) multiplied by the PLL factor.
+ * @note (*) HSI_VALUE is a constant defined in stm32f3xx_hal_conf.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f3xx_hal_conf.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baud-rate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U;
+ uint32_t sysclockfreq = 0U;
+
+ tmpreg = RCC->CFGR;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (tmpreg & RCC_CFGR_SWS)
+ {
+ case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */
+ {
+ pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> POSITION_VAL(RCC_CFGR_PLLMUL)];
+ prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> POSITION_VAL(RCC_CFGR2_PREDIV)];
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE / prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
+ pllclk = (HSI_VALUE >> 1U) * pllmul;
+ }
+#else
+ if ((tmpreg & RCC_CFGR_PLLSRC_HSE_PREDIV) == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE / prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+ pllclk = (HSI_VALUE / prediv) * pllmul;
+ }
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+ sysclockfreq = pllclk;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ default: /* HSI used as system clock */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated within this function
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_BITNUMBER]);
+}
+
+/**
+ * @brief Returns the PCLK2 frequency
+ * @note Each time PCLK2 changes, this function must be called to update the
+ * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK2 frequency
+ */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+ /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_BITNUMBER]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Check the parameters */
+ assert_param(RCC_OscInitStruct != NULL);
+
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \
+ | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ RCC_OscInitStruct->HSEPredivValue = __HAL_RCC_HSE_GET_PREDIV();
+#endif
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL);
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV);
+#endif /* RCC_CFGR_PLLSRC_HSI_PREDIV */
+}
+
+/**
+ * @brief Get the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
+ * contains the current clock configuration.
+ * @param pFLatency Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Check the parameters */
+ assert_param(RCC_ClkInitStruct != NULL);
+ assert_param(pFLatency != NULL);
+
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+ /* Get the APB2 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CSSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval none
+ */
+__weak void HAL_RCC_CSSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc_ex.c
new file mode 100644
index 00000000..b1f47057
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc_ex.c
@@ -0,0 +1,1596 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @brief Extended RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/** @defgroup RCCEx RCCEx
+ * @brief RCC Extension HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34) || defined(RCC_CFGR_USBPRE) \
+ || defined(RCC_CFGR3_TIM1SW) || defined(RCC_CFGR3_TIM2SW) || defined(RCC_CFGR3_TIM8SW) || defined(RCC_CFGR3_TIM15SW) \
+ || defined(RCC_CFGR3_TIM16SW) || defined(RCC_CFGR3_TIM17SW) || defined(RCC_CFGR3_TIM20SW) || defined(RCC_CFGR3_TIM34SW) \
+ || defined(RCC_CFGR3_HRTIM1SW)
+/** @defgroup RCCEx_Private_Functions RCCEx Private Functions
+ * @{
+ */
+static uint32_t RCC_GetPLLCLKFreq(void);
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRExx || RCC_CFGR3_TIMxSW || RCC_CFGR3_HRTIM1SW || RCC_CFGR_USBPRE */
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) are set to their reset values.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks
+ * (ADC, CEC, I2C, I2S, SDADC, HRTIM, TIM, USART, RTC and USB).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t temp_reg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- RTC configuration -------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ FlagStatus pwrclkchanged = RESET;
+
+ /* As soon as function is called to change RTC clock source, activation of the
+ power domain is done. */
+ /* Requires to enable write access to Backup Domain of necessary */
+ if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ {
+ __HAL_RCC_PWR_CLK_ENABLE();
+ pwrclkchanged = SET;
+ }
+
+ if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = temp_reg;
+
+ /* Wait for LSERDY if LSE was enabled */
+ if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON))
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+
+ /* Require to disable power clock if necessary */
+ if(pwrclkchanged == SET)
+ {
+ __HAL_RCC_PWR_CLK_DISABLE();
+ }
+ }
+
+ /*------------------------------- USART1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+#if defined(RCC_CFGR3_USART2SW)
+ /*----------------------------- USART2 Configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+ /*------------------------------ USART3 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+#endif /* RCC_CFGR3_USART3SW */
+
+ /*------------------------------ I2C1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+ /*------------------------------ USB Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->USBClockSelection));
+
+ /* Configure the USB clock source */
+ __HAL_RCC_USB_CONFIG(PeriphClkInit->USBClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+
+ /*------------------------------ I2C2 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+
+ /* Configure the I2C2 clock source */
+ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ I2C3 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+
+ /* Configure the I2C3 clock source */
+ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+ }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+ /*------------------------------ UART4 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+
+ /* Configure the UART4 clock source */
+ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+ }
+
+ /*------------------------------ UART5 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+
+ /* Configure the UART5 clock source */
+ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+ /*------------------------------ I2S Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+
+ /* Configure the I2S clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ ADC1 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC1) == RCC_PERIPHCLK_ADC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC1PLLCLK_DIV(PeriphClkInit->Adc1ClockSelection));
+
+ /* Configure the ADC1 clock source */
+ __HAL_RCC_ADC1_CONFIG(PeriphClkInit->Adc1ClockSelection);
+ }
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+ /*------------------------------ ADC1 & ADC2 clock Configuration -------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC12) == RCC_PERIPHCLK_ADC12)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC12PLLCLK_DIV(PeriphClkInit->Adc12ClockSelection));
+
+ /* Configure the ADC12 clock source */
+ __HAL_RCC_ADC12_CONFIG(PeriphClkInit->Adc12ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ /*------------------------------ ADC3 & ADC4 clock Configuration -------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC34) == RCC_PERIPHCLK_ADC34)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC34PLLCLK_DIV(PeriphClkInit->Adc34ClockSelection));
+
+ /* Configure the ADC34 clock source */
+ __HAL_RCC_ADC34_CONFIG(PeriphClkInit->Adc34ClockSelection);
+ }
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+ /*------------------------------ ADC1 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC1) == RCC_PERIPHCLK_ADC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC1PCLK2_DIV(PeriphClkInit->Adc1ClockSelection));
+
+ /* Configure the ADC1 clock source */
+ __HAL_RCC_ADC1_CONFIG(PeriphClkInit->Adc1ClockSelection);
+ }
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ TIM1 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM1CLKSOURCE(PeriphClkInit->Tim1ClockSelection));
+
+ /* Configure the TIM1 clock source */
+ __HAL_RCC_TIM1_CONFIG(PeriphClkInit->Tim1ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ /*------------------------------ TIM8 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM8) == RCC_PERIPHCLK_TIM8)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM8CLKSOURCE(PeriphClkInit->Tim8ClockSelection));
+
+ /* Configure the TIM8 clock source */
+ __HAL_RCC_TIM8_CONFIG(PeriphClkInit->Tim8ClockSelection);
+ }
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ TIM15 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection));
+
+ /* Configure the TIM15 clock source */
+ __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection);
+ }
+
+ /*------------------------------ TIM16 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM16) == RCC_PERIPHCLK_TIM16)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM16CLKSOURCE(PeriphClkInit->Tim16ClockSelection));
+
+ /* Configure the TIM16 clock source */
+ __HAL_RCC_TIM16_CONFIG(PeriphClkInit->Tim16ClockSelection);
+ }
+
+ /*------------------------------ TIM17 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM17) == RCC_PERIPHCLK_TIM17)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM17CLKSOURCE(PeriphClkInit->Tim17ClockSelection));
+
+ /* Configure the TIM17 clock source */
+ __HAL_RCC_TIM17_CONFIG(PeriphClkInit->Tim17ClockSelection);
+ }
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F334x8)
+
+ /*------------------------------ HRTIM1 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HRTIM1) == RCC_PERIPHCLK_HRTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HRTIM1CLKSOURCE(PeriphClkInit->Hrtim1ClockSelection));
+
+ /* Configure the HRTIM1 clock source */
+ __HAL_RCC_HRTIM1_CONFIG(PeriphClkInit->Hrtim1ClockSelection);
+ }
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+ /*------------------------------ SDADC clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDADC) == RCC_PERIPHCLK_SDADC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDADCSYSCLK_DIV(PeriphClkInit->SdadcClockSelection));
+
+ /* Configure the SDADC clock prescaler */
+ __HAL_RCC_SDADC_CONFIG(PeriphClkInit->SdadcClockSelection);
+ }
+
+ /*------------------------------ CEC clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+ /*------------------------------ TIM2 clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM2) == RCC_PERIPHCLK_TIM2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM2CLKSOURCE(PeriphClkInit->Tim2ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM2_CONFIG(PeriphClkInit->Tim2ClockSelection);
+ }
+
+ /*------------------------------ TIM3 clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM34) == RCC_PERIPHCLK_TIM34)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM3CLKSOURCE(PeriphClkInit->Tim34ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM34_CONFIG(PeriphClkInit->Tim34ClockSelection);
+ }
+
+ /*------------------------------ TIM15 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection);
+ }
+
+ /*------------------------------ TIM16 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM16) == RCC_PERIPHCLK_TIM16)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM16CLKSOURCE(PeriphClkInit->Tim16ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM16_CONFIG(PeriphClkInit->Tim16ClockSelection);
+ }
+
+ /*------------------------------ TIM17 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM17) == RCC_PERIPHCLK_TIM17)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM17CLKSOURCE(PeriphClkInit->Tim17ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM17_CONFIG(PeriphClkInit->Tim17ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+ /*------------------------------ TIM20 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM20) == RCC_PERIPHCLK_TIM20)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM20CLKSOURCE(PeriphClkInit->Tim20ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM20_CONFIG(PeriphClkInit->Tim20ClockSelection);
+ }
+#endif /* STM32F303xE || STM32F398xx */
+
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * returns the configuration information for the Extended Peripherals clocks
+ * (ADC, CEC, I2C, I2S, SDADC, HRTIM, TIM, USART, RTC and USB clocks).
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ /* Set all possible values for the extended clock type parameter------------*/
+ /* Common part first */
+#if defined(RCC_CFGR3_USART2SW) && defined(RCC_CFGR3_USART3SW)
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC;
+#else
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC;
+#endif /* RCC_CFGR3_USART2SW && RCC_CFGR3_USART3SW */
+
+ /* Get the RTC configuration --------------------------------------------*/
+ PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE();
+ /* Get the USART1 clock configuration --------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+#if defined(RCC_CFGR3_USART2SW)
+ /* Get the USART2 clock configuration -----------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+ /* Get the USART3 clock configuration -----------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+#endif /* RCC_CFGR3_USART3SW */
+ /* Get the I2C1 clock configuration -----------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB;
+ /* Get the USB clock configuration -----------------------------------------*/
+ PeriphClkInit->USBClockSelection = __HAL_RCC_GET_USB_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C2;
+ /* Get the I2C2 clock configuration -----------------------------------------*/
+ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C3;
+ /* Get the I2C3 clock configuration -----------------------------------------*/
+ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx)
+
+ PeriphClkInit->PeriphClockSelection |= (RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5);
+ /* Get the UART4 clock configuration -----------------------------------------*/
+ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+ /* Get the UART5 clock configuration -----------------------------------------*/
+ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S;
+ /* Get the I2S clock configuration -----------------------------------------*/
+ PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2S_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC1;
+ /* Get the ADC1 clock configuration -----------------------------------------*/
+ PeriphClkInit->Adc1ClockSelection = __HAL_RCC_GET_ADC1_SOURCE();
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC12;
+ /* Get the ADC1 & ADC2 clock configuration -----------------------------------------*/
+ PeriphClkInit->Adc12ClockSelection = __HAL_RCC_GET_ADC12_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC34;
+ /* Get the ADC3 & ADC4 clock configuration -----------------------------------------*/
+ PeriphClkInit->Adc34ClockSelection = __HAL_RCC_GET_ADC34_SOURCE();
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM1;
+ /* Get the TIM1 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim1ClockSelection = __HAL_RCC_GET_TIM1_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM8;
+ /* Get the TIM8 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim8ClockSelection = __HAL_RCC_GET_TIM8_SOURCE();
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= (RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | RCC_PERIPHCLK_TIM17);
+ /* Get the TIM15 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE();
+ /* Get the TIM16 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim16ClockSelection = __HAL_RCC_GET_TIM16_SOURCE();
+ /* Get the TIM17 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim17ClockSelection = __HAL_RCC_GET_TIM17_SOURCE();
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F334x8)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_HRTIM1;
+ /* Get the HRTIM1 clock configuration -----------------------------------------*/
+ PeriphClkInit->Hrtim1ClockSelection = __HAL_RCC_GET_HRTIM1_SOURCE();
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SDADC;
+ /* Get the SDADC clock configuration -----------------------------------------*/
+ PeriphClkInit->SdadcClockSelection = __HAL_RCC_GET_SDADC_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC;
+ /* Get the CEC clock configuration -----------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM2;
+ /* Get the TIM2 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim2ClockSelection = __HAL_RCC_GET_TIM2_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM34;
+ /* Get the TIM3 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim34ClockSelection = __HAL_RCC_GET_TIM34_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM15;
+ /* Get the TIM15 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM16;
+ /* Get the TIM16 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim16ClockSelection = __HAL_RCC_GET_TIM16_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM17;
+ /* Get the TIM17 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim17ClockSelection = __HAL_RCC_GET_TIM17_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined (STM32F303xE) || defined(STM32F398xx)
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM20;
+ /* Get the TIM20 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim20ClockSelection = __HAL_RCC_GET_TIM20_SOURCE();
+#endif /* STM32F303xE || STM32F398xx */
+}
+
+/**
+ * @brief Returns the peripheral clock frequency
+ * @note Returns 0 if peripheral clock is unknown or 0xDEADDEAD if not applicable.
+ * @param PeriphClk Peripheral clock identifier
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock
+ @if STM32F301x8
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ @endif
+ @if STM32F302x8
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ @endif
+ @if STM32F302xC
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ @endif
+ @if STM32F302xE
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM2 TIM2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM34 TIM34 peripheral clock
+ @endif
+ @if STM32F303x8
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ @endif
+ @if STM32F303xC
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ @endif
+ @if STM32F303xE
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM2 TIM2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM20 TIM20 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM34 TIM34 peripheral clock
+ @endif
+ @if STM32F318xx
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ @endif
+ @if STM32F328xx
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ @endif
+ @if STM32F334x8
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_HRTIM1 HRTIM1 peripheral clock
+ @endif
+ @if STM32F358xx
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ @endif
+ @if STM32F373xC
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_SDADC SDADC peripheral clock
+ * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock
+ @endif
+ @if STM32F378xx
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_SDADC SDADC peripheral clock
+ * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock
+ @endif
+ @if STM32F398xx
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM2 TIM2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM20 TIM20 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM34 TIM34 peripheral clock
+ @endif
+ * @retval Frequency in Hz (0: means that no available frequency for the peripheral)
+ */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+ /* frequency == 0 : means that no available frequency for the peripheral */
+ uint32_t frequency = 0U;
+
+ uint32_t srcclk = 0U;
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+ uint16_t adc_pll_prediv_table[16] = { 1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U, 256U, 256U, 256U, 256U};
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRE12 || RCC_CFGR2_ADCPRE34 */
+#if defined(RCC_CFGR_SDPRE)
+ uint8_t sdadc_prescaler_table[16] = { 2U, 4U, 6U, 8U, 10U, 12U, 14U, 16U, 20U, 24U, 28U, 32U, 36U, 40U, 44U, 48U};
+#endif /* RCC_CFGR_SDPRE */
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClk));
+
+ switch (PeriphClk)
+ {
+ case RCC_PERIPHCLK_RTC:
+ {
+ /* Get the current RTC source */
+ srcclk = __HAL_RCC_GET_RTC_SOURCE();
+
+ /* Check if LSE is ready and if RTC clock selection is LSE */
+ if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ /* Check if LSI is ready and if RTC clock selection is LSI */
+ else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)))
+ {
+ frequency = LSI_VALUE;
+ }
+ /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/
+ else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIV32) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)))
+ {
+ frequency = HSE_VALUE / 32U;
+ }
+ break;
+ }
+ case RCC_PERIPHCLK_USART1:
+ {
+ /* Get the current USART1 source */
+ srcclk = __HAL_RCC_GET_USART1_SOURCE();
+
+ /* Check if USART1 clock selection is PCLK1 */
+#if defined(RCC_USART1CLKSOURCE_PCLK2)
+ if (srcclk == RCC_USART1CLKSOURCE_PCLK2)
+ {
+ frequency = HAL_RCC_GetPCLK2Freq();
+ }
+#else
+ if (srcclk == RCC_USART1CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+#endif /* RCC_USART1CLKSOURCE_PCLK2 */
+ /* Check if HSI is ready and if USART1 clock selection is HSI */
+ else if ((srcclk == RCC_USART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if USART1 clock selection is SYSCLK */
+ else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if USART1 clock selection is LSE */
+ else if ((srcclk == RCC_USART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#if defined(RCC_CFGR3_USART2SW)
+ case RCC_PERIPHCLK_USART2:
+ {
+ /* Get the current USART2 source */
+ srcclk = __HAL_RCC_GET_USART2_SOURCE();
+
+ /* Check if USART2 clock selection is PCLK1 */
+ if (srcclk == RCC_USART2CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if USART2 clock selection is HSI */
+ else if ((srcclk == RCC_USART2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if USART2 clock selection is SYSCLK */
+ else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if USART2 clock selection is LSE */
+ else if ((srcclk == RCC_USART2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+ case RCC_PERIPHCLK_USART3:
+ {
+ /* Get the current USART3 source */
+ srcclk = __HAL_RCC_GET_USART3_SOURCE();
+
+ /* Check if USART3 clock selection is PCLK1 */
+ if (srcclk == RCC_USART3CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if USART3 clock selection is HSI */
+ else if ((srcclk == RCC_USART3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if USART3 clock selection is SYSCLK */
+ else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if USART3 clock selection is LSE */
+ else if ((srcclk == RCC_USART3CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_USART3SW */
+#if defined(RCC_CFGR3_UART4SW)
+ case RCC_PERIPHCLK_UART4:
+ {
+ /* Get the current UART4 source */
+ srcclk = __HAL_RCC_GET_UART4_SOURCE();
+
+ /* Check if UART4 clock selection is PCLK1 */
+ if (srcclk == RCC_UART4CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if UART4 clock selection is HSI */
+ else if ((srcclk == RCC_UART4CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if UART4 clock selection is SYSCLK */
+ else if (srcclk == RCC_UART4CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if UART4 clock selection is LSE */
+ else if ((srcclk == RCC_UART4CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_UART4SW */
+#if defined(RCC_CFGR3_UART5SW)
+ case RCC_PERIPHCLK_UART5:
+ {
+ /* Get the current UART5 source */
+ srcclk = __HAL_RCC_GET_UART5_SOURCE();
+
+ /* Check if UART5 clock selection is PCLK1 */
+ if (srcclk == RCC_UART5CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if UART5 clock selection is HSI */
+ else if ((srcclk == RCC_UART5CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if UART5 clock selection is SYSCLK */
+ else if (srcclk == RCC_UART5CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if UART5 clock selection is LSE */
+ else if ((srcclk == RCC_UART5CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_UART5SW */
+ case RCC_PERIPHCLK_I2C1:
+ {
+ /* Get the current I2C1 source */
+ srcclk = __HAL_RCC_GET_I2C1_SOURCE();
+
+ /* Check if HSI is ready and if I2C1 clock selection is HSI */
+ if ((srcclk == RCC_I2C1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if I2C1 clock selection is SYSCLK */
+ else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#if defined(RCC_CFGR3_I2C2SW)
+ case RCC_PERIPHCLK_I2C2:
+ {
+ /* Get the current I2C2 source */
+ srcclk = __HAL_RCC_GET_I2C2_SOURCE();
+
+ /* Check if HSI is ready and if I2C2 clock selection is HSI */
+ if ((srcclk == RCC_I2C2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if I2C2 clock selection is SYSCLK */
+ else if (srcclk == RCC_I2C2CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_I2C2SW */
+#if defined(RCC_CFGR3_I2C3SW)
+ case RCC_PERIPHCLK_I2C3:
+ {
+ /* Get the current I2C3 source */
+ srcclk = __HAL_RCC_GET_I2C3_SOURCE();
+
+ /* Check if HSI is ready and if I2C3 clock selection is HSI */
+ if ((srcclk == RCC_I2C3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if I2C3 clock selection is SYSCLK */
+ else if (srcclk == RCC_I2C3CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_I2C3SW */
+#if defined(RCC_CFGR_I2SSRC)
+ case RCC_PERIPHCLK_I2S:
+ {
+ /* Get the current I2S source */
+ srcclk = __HAL_RCC_GET_I2S_SOURCE();
+
+ /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin */
+ if (srcclk == RCC_I2SCLKSOURCE_EXT)
+ {
+ /* External clock used. Frequency cannot be returned.*/
+ frequency = 0xDEADDEADU;
+ }
+ /* Check if I2S clock selection is SYSCLK */
+ else if (srcclk == RCC_I2SCLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#endif /* RCC_CFGR_I2SSRC */
+#if defined(RCC_CFGR_USBPRE)
+ case RCC_PERIPHCLK_USB:
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Get the current USB source */
+ srcclk = __HAL_RCC_GET_USB_SOURCE();
+
+ /* Check if USB clock selection is not divided */
+ if (srcclk == RCC_USBCLKSOURCE_PLL)
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if USB clock selection is divided by 1.5 */
+ else /* RCC_USBCLKSOURCE_PLL_DIV1_5 */
+ {
+ frequency = (RCC_GetPLLCLKFreq() * 3U) / 2U;
+ }
+ }
+ break;
+ }
+#endif /* RCC_CFGR_USBPRE */
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR_ADCPRE)
+ case RCC_PERIPHCLK_ADC1:
+ {
+ /* Get the current ADC1 source */
+ srcclk = __HAL_RCC_GET_ADC1_SOURCE();
+#if defined(RCC_CFGR2_ADC1PRES)
+ /* Check if ADC1 clock selection is AHB */
+ if (srcclk == RCC_ADC1PLLCLK_OFF)
+ {
+ frequency = SystemCoreClock;
+ }
+ /* PLL clock has been selected */
+ else
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Frequency is the PLL frequency divided by ADC prescaler (1U/2U/4U/6U/8U/10U/12U/16U/32U/64U/128U/256U) */
+ frequency = RCC_GetPLLCLKFreq() / adc_pll_prediv_table[(srcclk >> POSITION_VAL(RCC_CFGR2_ADC1PRES)) & 0xFU];
+ }
+ }
+#else /* RCC_CFGR_ADCPRE */
+ /* ADC1 is set to PLCK2 frequency divided by 2U/4U/6U/8U */
+ frequency = HAL_RCC_GetPCLK2Freq() / (((srcclk >> POSITION_VAL(RCC_CFGR_ADCPRE)) + 1U) * 2U);
+#endif /* RCC_CFGR2_ADC1PRES */
+ break;
+ }
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR_ADCPRE */
+#if defined(RCC_CFGR2_ADCPRE12)
+ case RCC_PERIPHCLK_ADC12:
+ {
+ /* Get the current ADC12 source */
+ srcclk = __HAL_RCC_GET_ADC12_SOURCE();
+ /* Check if ADC12 clock selection is AHB */
+ if (srcclk == RCC_ADC12PLLCLK_OFF)
+ {
+ frequency = SystemCoreClock;
+ }
+ /* PLL clock has been selected */
+ else
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Frequency is the PLL frequency divided by ADC prescaler (1U/2U/4U/6/8U/10U/12U/16U/32U/64U/128U/256U) */
+ frequency = RCC_GetPLLCLKFreq() / adc_pll_prediv_table[(srcclk >> POSITION_VAL(RCC_CFGR2_ADCPRE12)) & 0xF];
+ }
+ }
+ break;
+ }
+#endif /* RCC_CFGR2_ADCPRE12 */
+#if defined(RCC_CFGR2_ADCPRE34)
+ case RCC_PERIPHCLK_ADC34:
+ {
+ /* Get the current ADC34 source */
+ srcclk = __HAL_RCC_GET_ADC34_SOURCE();
+ /* Check if ADC34 clock selection is AHB */
+ if (srcclk == RCC_ADC34PLLCLK_OFF)
+ {
+ frequency = SystemCoreClock;
+ }
+ /* PLL clock has been selected */
+ else
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Frequency is the PLL frequency divided by ADC prescaler (1U/2U/4U/6U/8U/10U/12U/16U/32U/64U/128U/256U) */
+ frequency = RCC_GetPLLCLKFreq() / adc_pll_prediv_table[(srcclk >> POSITION_VAL(RCC_CFGR2_ADCPRE34)) & 0xF];
+ }
+ }
+ break;
+ }
+#endif /* RCC_CFGR2_ADCPRE34 */
+#if defined(RCC_CFGR3_TIM1SW)
+ case RCC_PERIPHCLK_TIM1:
+ {
+ /* Get the current TIM1 source */
+ srcclk = __HAL_RCC_GET_TIM1_SOURCE();
+
+ /* Check if PLL is ready and if TIM1 clock selection is PLL */
+ if ((srcclk == RCC_TIM1CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM1 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM1CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM1SW */
+#if defined(RCC_CFGR3_TIM2SW)
+ case RCC_PERIPHCLK_TIM2:
+ {
+ /* Get the current TIM2 source */
+ srcclk = __HAL_RCC_GET_TIM2_SOURCE();
+
+ /* Check if PLL is ready and if TIM2 clock selection is PLL */
+ if ((srcclk == RCC_TIM2CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM2 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM2CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM2SW */
+#if defined(RCC_CFGR3_TIM8SW)
+ case RCC_PERIPHCLK_TIM8:
+ {
+ /* Get the current TIM8 source */
+ srcclk = __HAL_RCC_GET_TIM8_SOURCE();
+
+ /* Check if PLL is ready and if TIM8 clock selection is PLL */
+ if ((srcclk == RCC_TIM8CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM8 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM8CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM8SW */
+#if defined(RCC_CFGR3_TIM15SW)
+ case RCC_PERIPHCLK_TIM15:
+ {
+ /* Get the current TIM15 source */
+ srcclk = __HAL_RCC_GET_TIM15_SOURCE();
+
+ /* Check if PLL is ready and if TIM15 clock selection is PLL */
+ if ((srcclk == RCC_TIM15CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM15 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM15CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM15SW */
+#if defined(RCC_CFGR3_TIM16SW)
+ case RCC_PERIPHCLK_TIM16:
+ {
+ /* Get the current TIM16 source */
+ srcclk = __HAL_RCC_GET_TIM16_SOURCE();
+
+ /* Check if PLL is ready and if TIM16 clock selection is PLL */
+ if ((srcclk == RCC_TIM16CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM16 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM16CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM16SW */
+#if defined(RCC_CFGR3_TIM17SW)
+ case RCC_PERIPHCLK_TIM17:
+ {
+ /* Get the current TIM17 source */
+ srcclk = __HAL_RCC_GET_TIM17_SOURCE();
+
+ /* Check if PLL is ready and if TIM17 clock selection is PLL */
+ if ((srcclk == RCC_TIM17CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM17 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM17CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM17SW */
+#if defined(RCC_CFGR3_TIM20SW)
+ case RCC_PERIPHCLK_TIM20:
+ {
+ /* Get the current TIM20 source */
+ srcclk = __HAL_RCC_GET_TIM20_SOURCE();
+
+ /* Check if PLL is ready and if TIM20 clock selection is PLL */
+ if ((srcclk == RCC_TIM20CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM20 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM20CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM20SW */
+#if defined(RCC_CFGR3_TIM34SW)
+ case RCC_PERIPHCLK_TIM34:
+ {
+ /* Get the current TIM34 source */
+ srcclk = __HAL_RCC_GET_TIM34_SOURCE();
+
+ /* Check if PLL is ready and if TIM34 clock selection is PLL */
+ if ((srcclk == RCC_TIM34CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM34 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM34CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM34SW */
+#if defined(RCC_CFGR3_HRTIM1SW)
+ case RCC_PERIPHCLK_HRTIM1:
+ {
+ /* Get the current HRTIM1 source */
+ srcclk = __HAL_RCC_GET_HRTIM1_SOURCE();
+
+ /* Check if PLL is ready and if HRTIM1 clock selection is PLL */
+ if ((srcclk == RCC_HRTIM1CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if HRTIM1 clock selection is SYSCLK */
+ else if (srcclk == RCC_HRTIM1CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_HRTIM1SW */
+#if defined(RCC_CFGR_SDPRE)
+ case RCC_PERIPHCLK_SDADC:
+ {
+ /* Get the current SDADC source */
+ srcclk = __HAL_RCC_GET_SDADC_SOURCE();
+ /* Frequency is the system frequency divided by SDADC prescaler (2U/4U/6U/8U/10U/12U/14U/16U/20U/24U/28U/32U/36U/40U/44U/48U) */
+ frequency = SystemCoreClock / sdadc_prescaler_table[(srcclk >> POSITION_VAL(RCC_CFGR_SDPRE)) & 0xF];
+ break;
+ }
+#endif /* RCC_CFGR_SDPRE */
+#if defined(RCC_CFGR3_CECSW)
+ case RCC_PERIPHCLK_CEC:
+ {
+ /* Get the current CEC source */
+ srcclk = __HAL_RCC_GET_CEC_SOURCE();
+
+ /* Check if HSI is ready and if CEC clock selection is HSI */
+ if ((srcclk == RCC_CECCLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if LSE is ready and if CEC clock selection is LSE */
+ else if ((srcclk == RCC_CECCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_CECSW */
+ default:
+ {
+ break;
+ }
+ }
+ return(frequency);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34) || defined(RCC_CFGR_USBPRE) \
+ || defined(RCC_CFGR3_TIM1SW) || defined(RCC_CFGR3_TIM2SW) || defined(RCC_CFGR3_TIM8SW) || defined(RCC_CFGR3_TIM15SW) \
+ || defined(RCC_CFGR3_TIM16SW) || defined(RCC_CFGR3_TIM17SW) || defined(RCC_CFGR3_TIM20SW) || defined(RCC_CFGR3_TIM34SW) \
+ || defined(RCC_CFGR3_HRTIM1SW)
+
+/** @addtogroup RCCEx_Private_Functions
+ * @{
+ */
+static uint32_t RCC_GetPLLCLKFreq(void)
+{
+ uint32_t pllmul = 0U, pllsource = 0U, prediv = 0U, pllclk = 0U;
+
+ pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllmul = ( pllmul >> 18U) + 2U;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ if (pllsource != RCC_PLLSOURCE_HSI)
+ {
+ prediv = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U;
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE/prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/2U * PLLMUL */
+ pllclk = (HSI_VALUE >> 1U) * pllmul;
+ }
+#else
+ prediv = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U;
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE/prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+ pllclk = (HSI_VALUE/prediv) * pllmul;
+ }
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+ return pllclk;
+}
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRExx || RCC_CFGR3_TIMxSW || RCC_CFGR3_HRTIM1SW || RCC_CFGR_USBPRE */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim.c
new file mode 100644
index 00000000..964139f6
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim.c
@@ -0,0 +1,5492 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE ();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ Initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim TIM handle
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim TIM OC handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in DMA mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in DMA mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM OnePulse handle
+ * @param OnePulseMode Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim TIM One Pulse handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be disable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim TIM Encoder Interface handle
+ * @param sConfig TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
+
+ /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
+ tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim TIM Encoder handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2U */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1U */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2U */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2U */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1: The destination Buffer address for IC1.
+ * @param pData2: The destination Buffer address for IC2.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0U) || (pData2 == 0U) )) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1U */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2U */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2U */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim TIM handle
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE);
+ HAL_TIM_PeriodElapsedCallback(htim);
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK);
+ HAL_TIMEx_BreakCallback(htim);
+ }
+ }
+
+#if defined(TIM_FLAG_BREAK2)
+ /* TIM Break input 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2);
+ HAL_TIMEx_Break2Callback(htim);
+ }
+ }
+#endif
+
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER);
+ HAL_TIM_TriggerCallback(htim);
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM);
+ HAL_TIMEx_CommutationCallback(htim);
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim TIM IC handle
+ * @param sConfig TIM Input Capture configuration structure
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim TIM One Pulse handle
+ * @param sConfig TIM One Pulse configuration structure
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Ouput compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, ((BurstLength) >> 8U) + 1U);
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @param DataLength Data length. This parameter can be one value
+ * between 1 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+ assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U ) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim TIM handle
+ * @param BurstRequestSrc TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will starts the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, ((BurstLength) >> 8U) + 1U);
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer multiple Data from the TIM peripheral to the memory
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will starts the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @param DataLength Data length. This parameter can be one value
+ * between 1 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+ assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U ) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim TIM handle
+ * @param BurstRequestSrc TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim TIM handle
+ * @param EventSource specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source
+ * @retval HAL status
+ * @note TIM_EVENTSOURCE_BREAK2 isn't relevant for STM32F37xx and STM32F38xx
+ * devices
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim TIM handle
+ * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+
+ /* Check ETR input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
+
+ /* Check ETR input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI2 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim TIM handle.
+ * @param TI1_Selection: Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Disable Trigger Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim TIM handle.
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0U;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+
+}
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim TIM OC handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim TIM IC handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim TIM Base handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim TIM Ouput Compare handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim TIM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim TIM IC handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim TIM OPM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim TIM Encoder handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Private_Functions TIM_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_IC_CaptureCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx TIM periheral
+ * @param Structure TIM Base configuration structure
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0U;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ /* Set the auto-reload preload */
+ MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediatly */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Time Ouput Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4U);
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#else
+ /* Reset the Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+#endif
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8U);
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#else
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+#endif
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12U);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#else
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+#endif
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4U);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12U);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param InputTriggerSource The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPRESCALER_DIV1 : ETRP Prescaler OFF.
+ * @arg TIM_ETRPRESCALER_DIV2 : ETRP frequency divided by 2.
+ * @arg TIM_ETRPRESCALER_DIV4 : ETRP frequency divided by 4.
+ * @arg TIM_ETRPRESCALER_DIV8 : ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPOLARITY_INVERTED : active low or falling edge active.
+ * @arg TIM_ETRPOLARITY_NONINVERTED : active high or rising edge active.
+ * @param ExtTRGFilter External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0U;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @param ChannelState specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim_ex.c
new file mode 100644
index 00000000..cbdfce17
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim_ex.c
@@ -0,0 +1,2802 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer Extended peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6)
+ * + Time OCRef clear configuration
+ * + Timer remapping capabilities configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extended features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE ();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define BDTR_BKF_SHIFT (16U)
+#define BDTR_BK2F_SHIFT (20U)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config);
+
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim TIM Encoder Interface handle
+ * @param sConfig TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101U */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1U, 2 and 3
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim TIM Hall Sensor handle
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel for Capture 1U*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare.
+ (+) Stop the Complementary Output Compare.
+ (+) Start the Complementary Output Compare and enable interrupts.
+ (+) Stop the Complementary Output Compare and disable interrupts.
+ (+) Start the Complementary Output Compare and enable DMA transfers.
+ (+) Stop the Complementary Output Compare and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim TIM OC handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complemetary
+ * output.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure Output channels for OC and PWM mode.
+
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master synchronization.
+ (+) Configure timer remapping capabilities.
+ (+) Enable or disable channel grouping
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F303xE, STM32F358xx,
+ * STM32F398xx and STM32F303x8 up to 6 OC channels can be configured
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim,
+ TIM_OC_InitTypeDef* sConfig,
+ uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 5 in Output Compare */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 6 in Output Compare */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM PWM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be configured
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F303xE, STM32F358xx,
+ * STM32F398xx and STM32F303x8 up to 6 PWM channels can be configured
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
+ TIM_OC_InitTypeDef* sConfig,
+ uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel5*/
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel6 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim TIM handle.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+ TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ uint32_t tmpcr2;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2U */
+ if (IS_TIM_TRGO2_INSTANCE(htim->Instance))
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2));
+
+ /* Clear the MMS2 bits */
+ tmpcr2 &= ~TIM_CR2_MMS2;
+ /* Select the TRGO2 source*/
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger2;
+ }
+
+ /* Reset the MMS Bits */
+ tmpcr2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ tmpsmcr &= ~TIM_SMCR_MSM;
+ /* Set master mode */
+ tmpsmcr |= sMasterConfig->MasterSlaveMode;
+
+ /* Update TIMx CR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ /* Update TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim TIM handle.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Reset the MMS Bits */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_MSM;
+ /* Set or Reset the MSM Bit */
+ htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim TIM handle
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef
+ structure that contains the BDTR Register configuration information
+ for the TIM peripheral.
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F358xx, STM32F303xE,
+ STM32F398xx and STM32F303x8 two break inputs can be configured.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+ uint32_t tmpbdtr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << BDTR_BKF_SHIFT));
+
+ if (IS_TIM_BKIN2_INSTANCE(htim->Instance))
+ {
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Set the BREAK2 input related BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << BDTR_BK2F_SHIFT));
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity);
+ }
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim TIM handle
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig)
+{
+ uint32_t tmpbdtr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, sBreakDeadTimeConfig->AutomaticOutput);
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8)
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/**
+ * @brief Configures the TIM1, TIM8, TIM16 and TIM20 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap1: specifies the first TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM8_ADC2_NONE: TIM8_ETR is not connected to any ADC2 AWD
+ * @arg TIM_TIM8_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM8_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM8_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @arg TIM_TIM20_ADC3_NONE: TIM20_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM20_ADC3_AWD1: TIM20_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM20_ADC3_AWD2: TIM20_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM20_ADC3_AWD3: TIM20_ETR is connected to ADC3 AWD3
+ * @param Remap2: specifies the second TIMremapping source (if any).
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC4_NONE: TIM1_ETR is not connected to any ADC4 AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC4_AWD1: TIM1_ETR is connected to ADC4 AWD1
+ * @arg TIM_TIM1_ADC4_AWD2: TIM1_ETR is connected to ADC4 AWD2
+ * @arg TIM_TIM1_ADC4_AWD3: TIM1_ETR is connected to ADC4 AWD3
+ * @arg TIM_TIM8_ADC3_NONE: TIM8_ETR is not connected to any ADC3 AWD
+ * @arg TIM_TIM8_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM8_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM8_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3
+ * @arg TIM_TIM16_NONE: Non significant value for TIM16
+ * @arg TIM_TIM20_ADC4_NONE: TIM20_ETR is not connected to any ADC4 AWD
+ * @arg TIM_TIM20_ADC4_AWD1: TIM20_ETR is connected to ADC4 AWD1
+ * @arg TIM_TIM20_ADC4_AWD2: TIM20_ETR is connected to ADC4 AWD2
+ * @arg TIM_TIM20_ADC4_AWD3: TIM20_ETR is connected to ADC4 AWD3
+ * @retval HAL status
+ */
+#elif defined(STM32F303xC) || defined(STM32F358xx)
+/**
+ * @brief Configures the TIM1, TIM8 and TIM16 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap1: specifies the first TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM8_ADC2_NONE: TIM8_ETR is not connected to any AWD
+ * @arg TIM_TIM8_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM8_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM8_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @param Remap2: specifies the second TIMremapping source (if any).
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC4_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC4_AWD1: TIM1_ETR is connected to ADC4 AWD1
+ * @arg TIM_TIM1_ADC4_AWD2: TIM1_ETR is connected to ADC4 AWD2
+ * @arg TIM_TIM1_ADC4_AWD3: TIM1_ETR is connected to ADC4 AWD3
+ * @arg TIM_TIM8_ADC3_NONE: TIM8_ETR is not connected to any AWD
+ * @arg TIM_TIM8_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM8_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM8_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3
+ * @retval HAL status
+ */
+#else /* STM32F334x8 */
+/**
+ * @brief Configures the TIM1, TIM8 and TIM16 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap1: specifies the first TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @param Remap2: specifies the second TIMremapping source (if any).
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC2_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC2_AWD1: TIM1_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM1_ADC2_AWD2: TIM1_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM1_ADC2_AWD3: TIM1_ETR is connected to ADC2 AWD3
+ * @retval HAL status
+ */
+#endif /* STM32F303xE || STM32F398xx || */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap1));
+ assert_param(IS_TIM_REMAP2(Remap2));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap1 | Remap2;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || STM32F334x8 */
+
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configures the TIM1 and TIM16 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap specifies the TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC_clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @retval HAL status
+ */
+#else /* STM32F373xC || STM32F378xx */
+/**
+ * @brief Configures the TIM2 and TIM14 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap specifies the TIM remapping source.
+ * This parameter can be one of the following values:
+ * STM32F373xC, STM32F378xx:
+ * @arg TIM_TIM2_TIM8_TRGO: TIM8 TRGOUT is connected to TIM2_ITR1
+ * @arg TIM_TIM2_ETH_PTP: PTP trigger output is connected to TIM2_ITR1
+ * @arg TIM_TIM2_USBFS_SOF: OTG FS SOF is connected to the TIM2_ITR1 input
+ * @arg TIM_TIM2_USBHS_SOF: OTG HS SOF is connected to the TIM2_ITR1 input
+ * @arg TIM_TIM14_GPIO: TIM14 TI1 is connected to GPIO
+ * @arg TIM_TIM14_RTC: TIM14 TI1 is connected to RTC_clock
+ * @arg TIM_TIM14_HSE: TIM14 TI1 is connected to HSE/32
+ * @arg TIM_TIM14_MCO: TIM14 TI1 is connected to MCO
+ * @retval HAL status
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Group channel 5 and channel 1, 2 or 3
+ * @param htim TIM handle.
+ * @param Channels specifies the reference signal(s) the OC5REF is combined with.
+ * This parameter can be any combination of the following values:
+ * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC
+ * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF
+ * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF
+ * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels)
+{
+ /* Check parameters */
+ assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_GROUPCH5(Channels));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Clear GC5Cx bit fields */
+ htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3|TIM_CCR5_GC5C2|TIM_CCR5_GC5C1);
+
+ /* Set GC5Cx bit fields */
+ htim->Instance->CCR5 |= Channels;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @arg TIM_Channel_5: TIM Channel 5
+ * @arg TIM_Channel_6: TIM Channel 6
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F303xE, STM32F358xx,
+ * STM32F398xx and STM32F303x8 up to 6 OC channels can be configured
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+ TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (sClearInputConfig->ClearInputSource)
+ {
+ case TIM_CLEARINPUTSOURCE_NONE:
+ {
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Clear the OCREF clear selection bit */
+ tmpsmcr &= ~TIM_SMCR_OCCS;
+
+ /* Clear the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set TIMx_SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_OCREFCLR:
+ {
+ /* Clear the OCREF clear selection bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_OCCS;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_ETR:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+
+ /* Set the OCREF clear selection bit */
+ htim->Instance->SMCR |= TIM_SMCR_OCCS;
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_5:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_6:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extension Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extended TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break2 detection callback in non blocking mode
+ * @param htim: TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_Break2Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIMEx_CommutationCallback(htim);
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @param ChannelNState specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0U;
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Timer Ouput Compare 5 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC5E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC5M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC5P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 16U);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS5;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 8U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR5 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Ouput Compare 6 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC6E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC6M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint32_t)~TIM_CCER_CC6P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 20U);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS6;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 10U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR6 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_dma.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_dma.c
new file mode 100644
index 00000000..2e03385a
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_dma.c
@@ -0,0 +1,352 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_dma.c
+ * @author MCD Application Team
+ * @brief DMA LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_ll_dma.h"
+#include "stm32f3xx_ll_bus.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup DMA_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \
+ ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \
+ ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY))
+
+#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \
+ ((__VALUE__) == LL_DMA_MODE_CIRCULAR))
+
+#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \
+ ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT))
+
+#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \
+ ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT))
+
+#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \
+ ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \
+ ((__VALUE__) == LL_DMA_PDATAALIGN_WORD))
+
+#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \
+ ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \
+ ((__VALUE__) == LL_DMA_MDATAALIGN_WORD))
+
+#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
+
+
+#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \
+ ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \
+ ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \
+ ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH))
+
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
+ (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_5) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_6) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_7))) || \
+ (((INSTANCE) == DMA2) && \
+ (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_5) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_6) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_7))))
+#else
+#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
+ (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_5) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_6) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_7))) || \
+ (((INSTANCE) == DMA2) && \
+ (((CHANNEL) == LL_DMA_CHANNEL_1) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_5))))
+#endif
+#else
+#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
+ (((CHANNEL) == LL_DMA_CHANNEL_1)|| \
+ ((CHANNEL) == LL_DMA_CHANNEL_2) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_3) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_4) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_5) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_6) || \
+ ((CHANNEL) == LL_DMA_CHANNEL_7))))
+#endif
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize the DMA registers to their default reset values.
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: DMA registers are de-initialized
+ * - ERROR: DMA registers are not de-initialized
+ */
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1;
+ ErrorStatus status = SUCCESS;
+
+ /* Check the DMA Instance DMAx and Channel parameters*/
+ assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
+
+ tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel));
+
+ /* Disable the selected DMAx_Channely */
+ CLEAR_BIT(tmp->CCR, DMA_CCR_EN);
+
+ /* Reset DMAx_Channely control register */
+ LL_DMA_WriteReg(tmp, CCR, 0U);
+
+ /* Reset DMAx_Channely remaining bytes register */
+ LL_DMA_WriteReg(tmp, CNDTR, 0U);
+
+ /* Reset DMAx_Channely peripheral address register */
+ LL_DMA_WriteReg(tmp, CPAR, 0U);
+
+ /* Reset DMAx_Channely memory address register */
+ LL_DMA_WriteReg(tmp, CMAR, 0U);
+
+
+ if (Channel == LL_DMA_CHANNEL_1)
+ {
+ /* Reset interrupt pending bits for DMAx Channel1 */
+ LL_DMA_ClearFlag_GI1(DMAx);
+ }
+ else if (Channel == LL_DMA_CHANNEL_2)
+ {
+ /* Reset interrupt pending bits for DMAx Channel2 */
+ LL_DMA_ClearFlag_GI2(DMAx);
+ }
+ else if (Channel == LL_DMA_CHANNEL_3)
+ {
+ /* Reset interrupt pending bits for DMAx Channel3 */
+ LL_DMA_ClearFlag_GI3(DMAx);
+ }
+ else if (Channel == LL_DMA_CHANNEL_4)
+ {
+ /* Reset interrupt pending bits for DMAx Channel4 */
+ LL_DMA_ClearFlag_GI4(DMAx);
+ }
+ else if (Channel == LL_DMA_CHANNEL_5)
+ {
+ /* Reset interrupt pending bits for DMAx Channel5 */
+ LL_DMA_ClearFlag_GI5(DMAx);
+ }
+
+ else if (Channel == LL_DMA_CHANNEL_6)
+ {
+ /* Reset interrupt pending bits for DMAx Channel6 */
+ LL_DMA_ClearFlag_GI6(DMAx);
+ }
+ else if (Channel == LL_DMA_CHANNEL_7)
+ {
+ /* Reset interrupt pending bits for DMAx Channel7 */
+ LL_DMA_ClearFlag_GI7(DMAx);
+ }
+ else
+ {
+ status = ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct.
+ * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros :
+ * @arg @ref __LL_DMA_GET_INSTANCE
+ * @arg @ref __LL_DMA_GET_CHANNEL
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: DMA registers are initialized
+ * - ERROR: Not applicable
+ */
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct)
+{
+ /* Check the DMA Instance DMAx and Channel parameters*/
+ assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
+
+ /* Check the DMA parameters from DMA_InitStruct */
+ assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction));
+ assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode));
+ assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode));
+ assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode));
+ assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize));
+ assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize));
+ assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData));
+ assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority));
+
+ /*---------------------------- DMAx CCR Configuration ------------------------
+ * Configure DMAx_Channely: data transfer direction, data transfer mode,
+ * peripheral and memory increment mode,
+ * data size alignment and priority level with parameters :
+ * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits
+ * - Mode: DMA_CCR_CIRC bit
+ * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit
+ * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit
+ * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits
+ * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits
+ * - Priority: DMA_CCR_PL[1:0] bits
+ */
+ LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \
+ DMA_InitStruct->Mode | \
+ DMA_InitStruct->PeriphOrM2MSrcIncMode | \
+ DMA_InitStruct->MemoryOrM2MDstIncMode | \
+ DMA_InitStruct->PeriphOrM2MSrcDataSize | \
+ DMA_InitStruct->MemoryOrM2MDstDataSize | \
+ DMA_InitStruct->Priority);
+
+ /*-------------------------- DMAx CMAR Configuration -------------------------
+ * Configure the memory or destination base address with parameter :
+ * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits
+ */
+ LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress);
+
+ /*-------------------------- DMAx CPAR Configuration -------------------------
+ * Configure the peripheral or source base address with parameter :
+ * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits
+ */
+ LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress);
+
+ /*--------------------------- DMAx CNDTR Configuration -----------------------
+ * Configure the peripheral base address with parameter :
+ * - NbData: DMA_CNDTR_NDT[15:0] bits
+ */
+ LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData);
+
+
+ return SUCCESS;
+}
+
+/**
+ * @brief Set each @ref LL_DMA_InitTypeDef field to default value.
+ * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure.
+ * @retval None
+ */
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct)
+{
+ /* Set DMA_InitStruct fields to default values */
+ DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U;
+ DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U;
+ DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
+ DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL;
+ DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
+ DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT;
+ DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE;
+ DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE;
+ DMA_InitStruct->NbData = 0x00000000U;
+ DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_exti.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_exti.c
new file mode 100644
index 00000000..47c9f227
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_exti.c
@@ -0,0 +1,317 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_exti.c
+ * @author MCD Application Team
+ * @brief EXTI LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_ll_exti.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Private_Macros
+ * @{
+ */
+
+#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
+#if defined(EXTI_32_63_SUPPORT)
+#define IS_LL_EXTI_LINE_32_63(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_32_63) == 0x00000000U)
+#endif
+
+#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \
+ || ((__VALUE__) == LL_EXTI_MODE_EVENT) \
+ || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
+
+
+#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \
+ || ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \
+ || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \
+ || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup EXTI_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize the EXTI registers to their default reset values.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: EXTI registers are de-initialized
+ * - ERROR: not applicable
+ */
+uint32_t LL_EXTI_DeInit(void)
+{
+ /* Interrupt mask register set to default reset values */
+ LL_EXTI_WriteReg(IMR, 0x1F800000U);
+ /* Event mask register set to default reset values */
+ LL_EXTI_WriteReg(EMR, 0x00000000U);
+ /* Rising Trigger selection register set to default reset values */
+ LL_EXTI_WriteReg(RTSR, 0x00000000U);
+ /* Falling Trigger selection register set to default reset values */
+ LL_EXTI_WriteReg(FTSR, 0x00000000U);
+ /* Software interrupt event register set to default reset values */
+ LL_EXTI_WriteReg(SWIER, 0x00000000U);
+ /* Pending register clear */
+ LL_EXTI_WriteReg(PR, 0x007FFFFFU);
+
+#if defined(EXTI_32_63_SUPPORT)
+ /* Interrupt mask register 2 set to default reset values */
+#if defined(STM32F334x8)
+ LL_EXTI_WriteReg(IMR2, 0xFFFFFFFEU);
+#else
+ LL_EXTI_WriteReg(IMR2, 0xFFFFFFFCU);
+#endif
+ /* Event mask register 2 set to default reset values */
+ LL_EXTI_WriteReg(EMR2, 0x00000000U);
+ /* Rising Trigger selection register 2 set to default reset values */
+ LL_EXTI_WriteReg(RTSR2, 0x00000000U);
+ /* Falling Trigger selection register 2 set to default reset values */
+ LL_EXTI_WriteReg(FTSR2, 0x00000000U);
+ /* Software interrupt event register 2 set to default reset values */
+ LL_EXTI_WriteReg(SWIER2, 0x00000000U);
+ /* Pending register 2 clear */
+ LL_EXTI_WriteReg(PR2, 0x00000003U);
+
+#endif
+ return SUCCESS;
+}
+
+/**
+ * @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
+ * @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: EXTI registers are initialized
+ * - ERROR: not applicable
+ */
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ /* Check the parameters */
+ assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
+#if defined(EXTI_32_63_SUPPORT)
+ assert_param(IS_LL_EXTI_LINE_32_63(EXTI_InitStruct->Line_32_63));
+#endif
+ assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
+ assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
+
+ /* ENABLE LineCommand */
+ if (EXTI_InitStruct->LineCommand != DISABLE)
+ {
+ assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
+
+ /* Configure EXTI Lines in range from 0 to 31 */
+ if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
+ {
+ switch (EXTI_InitStruct->Mode)
+ {
+ case LL_EXTI_MODE_IT:
+ /* First Disable Event on provided Lines */
+ LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable IT on provided Lines */
+ LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_MODE_EVENT:
+ /* First Disable IT on provided Lines */
+ LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable Event on provided Lines */
+ LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_MODE_IT_EVENT:
+ /* Directly Enable IT & Event on provided Lines */
+ LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+ LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ default:
+ status = ERROR;
+ break;
+ }
+ if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+ {
+ switch (EXTI_InitStruct->Trigger)
+ {
+ case LL_EXTI_TRIGGER_RISING:
+ /* First Disable Falling Trigger on provided Lines */
+ LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable Rising Trigger on provided Lines */
+ LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_TRIGGER_FALLING:
+ /* First Disable Rising Trigger on provided Lines */
+ LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ /* Then Enable Falling Trigger on provided Lines */
+ LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ case LL_EXTI_TRIGGER_RISING_FALLING:
+ LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+ break;
+ default:
+ status = ERROR;
+ break;
+ }
+ }
+ }
+#if defined(EXTI_32_63_SUPPORT)
+ /* Configure EXTI Lines in range from 32 to 63 */
+ if (EXTI_InitStruct->Line_32_63 != LL_EXTI_LINE_NONE)
+ {
+ switch (EXTI_InitStruct->Mode)
+ {
+ case LL_EXTI_MODE_IT:
+ /* First Disable Event on provided Lines */
+ LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63);
+ /* Then Enable IT on provided Lines */
+ LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63);
+ break;
+ case LL_EXTI_MODE_EVENT:
+ /* First Disable IT on provided Lines */
+ LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63);
+ /* Then Enable Event on provided Lines */
+ LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63);
+ break;
+ case LL_EXTI_MODE_IT_EVENT:
+ /* Directly Enable IT & Event on provided Lines */
+ LL_EXTI_EnableIT_32_63(EXTI_InitStruct->Line_32_63);
+ LL_EXTI_EnableEvent_32_63(EXTI_InitStruct->Line_32_63);
+ break;
+ default:
+ status = ERROR;
+ break;
+ }
+ if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+ {
+ switch (EXTI_InitStruct->Trigger)
+ {
+ case LL_EXTI_TRIGGER_RISING:
+ /* First Disable Falling Trigger on provided Lines */
+ LL_EXTI_DisableFallingTrig_32_63(EXTI_InitStruct->Line_32_63);
+ /* Then Enable IT on provided Lines */
+ LL_EXTI_EnableRisingTrig_32_63(EXTI_InitStruct->Line_32_63);
+ break;
+ case LL_EXTI_TRIGGER_FALLING:
+ /* First Disable Rising Trigger on provided Lines */
+ LL_EXTI_DisableRisingTrig_32_63(EXTI_InitStruct->Line_32_63);
+ /* Then Enable Falling Trigger on provided Lines */
+ LL_EXTI_EnableFallingTrig_32_63(EXTI_InitStruct->Line_32_63);
+ break;
+ case LL_EXTI_TRIGGER_RISING_FALLING:
+ LL_EXTI_EnableRisingTrig_32_63(EXTI_InitStruct->Line_32_63);
+ LL_EXTI_EnableFallingTrig_32_63(EXTI_InitStruct->Line_32_63);
+ break;
+ default:
+ status = ERROR;
+ break;
+ }
+ }
+ }
+#endif
+ }
+ /* DISABLE LineCommand */
+ else
+ {
+ /* De-configure EXTI Lines in range from 0 to 31 */
+ LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+ LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+#if defined(EXTI_32_63_SUPPORT)
+ /* De-configure EXTI Lines in range from 32 to 63 */
+ LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63);
+ LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63);
+#endif
+ }
+ return status;
+}
+
+/**
+ * @brief Set each @ref LL_EXTI_InitTypeDef field to default value.
+ * @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
+ * @retval None
+ */
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+ EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE;
+#if defined(EXTI_32_63_SUPPORT)
+ EXTI_InitStruct->Line_32_63 = LL_EXTI_LINE_NONE;
+#endif
+ EXTI_InitStruct->LineCommand = DISABLE;
+ EXTI_InitStruct->Mode = LL_EXTI_MODE_IT;
+ EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (EXTI) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_gpio.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_gpio.c
new file mode 100644
index 00000000..dea7d7b2
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_gpio.c
@@ -0,0 +1,301 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_gpio.c
+ * @author MCD Application Team
+ * @brief GPIO LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_ll_gpio.h"
+#include "stm32f3xx_ll_bus.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH)
+
+/** @addtogroup GPIO_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_GPIO_PIN(__VALUE__) (((0x00000000U) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL)))
+
+#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\
+ ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\
+ ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\
+ ((__VALUE__) == LL_GPIO_MODE_ANALOG))
+
+#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\
+ ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN))
+
+#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\
+ ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\
+ ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH))
+
+#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\
+ ((__VALUE__) == LL_GPIO_PULL_UP) ||\
+ ((__VALUE__) == LL_GPIO_PULL_DOWN))
+
+#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_1 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_2 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_3 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_4 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_5 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_6 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_7 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_8 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_9 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_10 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_11 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_12 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_13 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_14 ) ||\
+ ((__VALUE__) == LL_GPIO_AF_15 ))
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize GPIO registers (Registers restored to their default values).
+ * @param GPIOx GPIO Port
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: GPIO registers are de-initialized
+ * - ERROR: Wrong GPIO Port
+ */
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+
+ /* Force and Release reset on clock of GPIOx Port */
+ if (GPIOx == GPIOA)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA);
+ }
+ else if (GPIOx == GPIOB)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB);
+ }
+ else if (GPIOx == GPIOC)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC);
+ }
+#if defined(GPIOD)
+ else if (GPIOx == GPIOD)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD);
+ }
+#endif /* GPIOD */
+#if defined(GPIOE)
+ else if (GPIOx == GPIOE)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE);
+ }
+#endif /* GPIOE */
+#if defined(GPIOF)
+ else if (GPIOx == GPIOF)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF);
+ }
+#endif /* GPIOF */
+#if defined(GPIOG)
+ else if (GPIOx == GPIOG)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOG);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOG);
+ }
+#endif /* GPIOG */
+#if defined(GPIOH)
+ else if (GPIOx == GPIOH)
+ {
+ LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOH);
+ LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOH);
+ }
+#endif /* GPIOH */
+ else
+ {
+ status = ERROR;
+ }
+
+ return (status);
+}
+
+/**
+ * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct.
+ * @param GPIOx GPIO Port
+ * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
+ * that contains the configuration information for the specified GPIO peripheral.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content
+ * - ERROR: Not applicable
+ */
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct)
+{
+ uint32_t pinpos = 0x00000000U;
+ uint32_t currentpin = 0x00000000U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin));
+ assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode));
+ assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull));
+
+ /* ------------------------- Configure the port pins ---------------- */
+ /* Initialize pinpos on first pin set */
+ pinpos = POSITION_VAL(GPIO_InitStruct->Pin);
+
+ /* Configure the port pins */
+ while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00000000U)
+ {
+ /* Get current io position */
+ currentpin = (GPIO_InitStruct->Pin) & (0x00000001U << pinpos);
+
+ if (currentpin)
+ {
+ /* Pin Mode configuration */
+ LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
+
+ if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
+ {
+ /* Check Speed mode parameters */
+ assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed));
+
+ /* Speed mode configuration */
+ LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
+ }
+
+ /* Pull-up Pull down resistor configuration*/
+ LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull);
+
+ if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)
+ {
+ /* Check Alternate parameter */
+ assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate));
+
+ /* Speed mode configuration */
+ if (POSITION_VAL(currentpin) < 0x00000008U)
+ {
+ LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate);
+ }
+ else
+ {
+ LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
+ }
+ }
+ }
+ pinpos++;
+ }
+
+ if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
+ {
+ /* Check Output mode parameters */
+ assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
+
+ /* Output mode configuration*/
+ LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
+
+ }
+ return (SUCCESS);
+}
+
+/**
+ * @brief Set each @ref LL_GPIO_InitTypeDef field to default value.
+ * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
+ * whose fields will be set to default values.
+ * @retval None
+ */
+
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct)
+{
+ /* Reset GPIO init structure parameters values */
+ GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL;
+ GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG;
+ GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct->Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct->Alternate = LL_GPIO_AF_0;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_rcc.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_rcc.c
new file mode 100644
index 00000000..58729145
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_rcc.c
@@ -0,0 +1,1119 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_rcc.c
+ * @author MCD Application Team
+ * @brief RCC LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_ll_rcc.h"
+#ifdef USE_FULL_ASSERT
+ #include "stm32_assert.h"
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup RCC_LL RCC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup RCC_LL_Private_Variables
+ * @{
+ */
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+const uint16_t aADCPrescTable[16] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U, 256U, 256U, 256U, 256U};
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRE12 || RCC_CFGR2_ADCPRE34 */
+#if defined(RCC_CFGR_SDPRE)
+const uint8_t aSDADCPrescTable[16] = {2U, 4U, 6U, 8U, 10U, 12U, 14U, 16U, 20U, 24U, 28U, 32U, 36U, 40U, 44U, 48U};
+#endif /* RCC_CFGR_SDPRE */
+/**
+ * @}
+ */
+
+
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_LL_Private_Macros
+ * @{
+ */
+#if defined(RCC_CFGR3_USART2SW) && defined(RCC_CFGR3_USART3SW)
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
+#elif defined(RCC_CFGR3_USART2SW) && !defined(RCC_CFGR3_USART3SW)
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE))
+#elif defined(RCC_CFGR3_USART3SW) && !defined(RCC_CFGR3_USART2SW)
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
+#else
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE))
+#endif /* RCC_CFGR3_USART2SW && RCC_CFGR3_USART3SW */
+
+#if defined(UART4) && defined(UART5)
+#define IS_LL_RCC_UART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_UART4_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_UART5_CLKSOURCE))
+#elif defined(UART4)
+#define IS_LL_RCC_UART_INSTANCE(__VALUE__) ((__VALUE__) == LL_RCC_UART4_CLKSOURCE)
+#elif defined(UART5)
+#define IS_LL_RCC_UART_INSTANCE(__VALUE__) ((__VALUE__) == LL_RCC_UART5_CLKSOURCE)
+#endif /* UART4 && UART5*/
+
+#if defined(RCC_CFGR3_I2C2SW) && defined(RCC_CFGR3_I2C3SW)
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE))
+
+#elif defined(RCC_CFGR3_I2C2SW) && !defined(RCC_CFGR3_I2C3SW)
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE))
+
+#elif defined(RCC_CFGR3_I2C3SW) && !defined(RCC_CFGR3_I2C2SW)
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE))
+
+#else
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE)
+#endif /* RCC_CFGR3_I2C2SW && RCC_CFGR3_I2C3SW */
+
+#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2S_CLKSOURCE)
+
+#if defined(USB)
+#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE))
+#endif /* USB */
+
+#if defined(RCC_CFGR_ADCPRE)
+#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE))
+#else
+#if defined(RCC_CFGR2_ADC1PRES)
+#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC1_CLKSOURCE))
+#elif defined(RCC_CFGR2_ADCPRE12) && defined(RCC_CFGR2_ADCPRE34)
+#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC12_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_ADC34_CLKSOURCE))
+#else /* RCC_CFGR2_ADCPRE12 */
+#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC12_CLKSOURCE))
+#endif /* RCC_CFGR2_ADC1PRES */
+#endif /* RCC_CFGR_ADCPRE */
+
+#if defined(RCC_CFGR_SDPRE)
+#define IS_LL_RCC_SDADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SDADC_CLKSOURCE))
+#endif /* RCC_CFGR_SDPRE */
+
+#if defined(CEC)
+#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE))
+#endif /* CEC */
+
+#if defined(RCC_CFGR3_TIMSW)
+#if defined(RCC_CFGR3_TIM8SW) && defined(RCC_CFGR3_TIM15SW) && defined(RCC_CFGR3_TIM16SW) \
+ && defined(RCC_CFGR3_TIM17SW) && defined(RCC_CFGR3_TIM20SW) && defined(RCC_CFGR3_TIM2SW) \
+ && defined(RCC_CFGR3_TIM34SW)
+
+#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM8_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM16_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM17_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM20_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM34_CLKSOURCE))
+
+#elif !defined(RCC_CFGR3_TIM8SW) && defined(RCC_CFGR3_TIM15SW) && defined(RCC_CFGR3_TIM16SW) \
+ && defined(RCC_CFGR3_TIM17SW) && !defined(RCC_CFGR3_TIM20SW) && defined(RCC_CFGR3_TIM2SW) \
+ && defined(RCC_CFGR3_TIM34SW)
+
+#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM16_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM17_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM34_CLKSOURCE))
+
+#elif defined(RCC_CFGR3_TIM8SW) && !defined(RCC_CFGR3_TIM15SW) && !defined(RCC_CFGR3_TIM16SW) \
+ && !defined(RCC_CFGR3_TIM17SW) && !defined(RCC_CFGR3_TIM20SW) && !defined(RCC_CFGR3_TIM2SW) \
+ && !defined(RCC_CFGR3_TIM34SW)
+
+#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM8_CLKSOURCE))
+
+#elif !defined(RCC_CFGR3_TIM8SW) && defined(RCC_CFGR3_TIM15SW) && defined(RCC_CFGR3_TIM16SW) \
+ && defined(RCC_CFGR3_TIM17SW) && !defined(RCC_CFGR3_TIM20SW) && !defined(RCC_CFGR3_TIM2SW) \
+ && !defined(RCC_CFGR3_TIM34SW)
+
+#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM16_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_TIM17_CLKSOURCE))
+
+#elif !defined(RCC_CFGR3_TIM8SW) && !defined(RCC_CFGR3_TIM15SW) && !defined(RCC_CFGR3_TIM16SW) \
+ && !defined(RCC_CFGR3_TIM17SW) && !defined(RCC_CFGR3_TIM20SW) && !defined(RCC_CFGR3_TIM2SW) \
+ && !defined(RCC_CFGR3_TIM34SW)
+
+#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE))
+
+#else
+#error "Miss macro"
+#endif /* RCC_CFGR3_TIMxSW */
+#endif /* RCC_CFGR3_TIMSW */
+
+#if defined(HRTIM1)
+#define IS_LL_RCC_HRTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_HRTIM1_CLKSOURCE))
+#endif /* HRTIM1 */
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup RCC_LL_Private_Functions RCC Private functions
+ * @{
+ */
+uint32_t RCC_GetSystemClockFreq(void);
+uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
+uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
+uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency);
+uint32_t RCC_PLL_GetFreqDomain_SYS(void);
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief Reset the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: RCC registers are de-initialized
+ * - ERROR: not applicable
+ */
+ErrorStatus LL_RCC_DeInit(void)
+{
+ uint32_t vl_mask = 0U;
+
+ /* Set HSION bit */
+ LL_RCC_HSI_Enable();
+
+ /* Set HSITRIM bits to the reset value*/
+ LL_RCC_HSI_SetCalibTrimming(0x10U);
+
+ /* Reset SW, HPRE, PPRE and MCOSEL bits */
+ vl_mask = 0xFFFFFFFFU;
+ CLEAR_BIT(vl_mask, (RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE1 | RCC_CFGR_PPRE2 | RCC_CFGR_MCOSEL));
+ LL_RCC_WriteReg(CFGR, vl_mask);
+
+ /* Reset HSEON, CSSON, PLLON bits */
+ vl_mask = 0xFFFFFFFFU;
+ CLEAR_BIT(vl_mask, (RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON));
+ LL_RCC_WriteReg(CR, vl_mask);
+
+ /* Reset HSEBYP bit */
+ LL_RCC_HSE_DisableBypass();
+
+ /* Reset CFGR register */
+ LL_RCC_WriteReg(CFGR, 0x00000000U);
+
+ /* Reset CFGR2 register */
+ LL_RCC_WriteReg(CFGR2, 0x00000000U);
+
+ /* Reset CFGR3 register */
+ LL_RCC_WriteReg(CFGR3, 0x00000000U);
+
+ /* Clear pending flags */
+ vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC | LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_CSSC);
+ SET_BIT(RCC->CIR, vl_mask);
+
+ /* Disable all interrupts */
+ LL_RCC_WriteReg(CIR, 0x00000000U);
+
+ return SUCCESS;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_LL_EF_Get_Freq
+ * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks
+ * and different peripheral clocks available on the device.
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***)
+ * @note If SYSCLK source is PLL, function returns values based on
+ * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
+ * @note (**) HSI_VALUE is a defined constant but the real value may vary
+ * depending on the variations in voltage and temperature.
+ * @note (***) HSE_VALUE is a defined constant, user has to ensure that
+ * HSE_VALUE is same as the real frequency of the crystal used.
+ * Otherwise, this function may have wrong result.
+ * @note The result of this function could be incorrect when using fractional
+ * value for HSE crystal.
+ * @note This function can be used by the user application to compute the
+ * baud-rate for the communication peripherals or configure other parameters.
+ * @{
+ */
+
+/**
+ * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks
+ * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function
+ * must be called to update structure fields. Otherwise, any
+ * configuration based on this function will be incorrect.
+ * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies
+ * @retval None
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks)
+{
+ /* Get SYSCLK frequency */
+ RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq();
+
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency);
+
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency);
+
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency);
+}
+
+/**
+ * @brief Return USARTx clock frequency
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval USART clock frequency (in Hz)
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource)
+{
+ uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource));
+#if defined(RCC_CFGR3_USART1SW)
+ if (USARTxSource == LL_RCC_USART1_CLKSOURCE)
+ {
+ /* USART1CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+#if defined(RCC_CFGR3_USART1SW_PCLK1)
+ case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+#else
+ case LL_RCC_USART1_CLKSOURCE_PCLK2: /* USART1 Clock is PCLK2 */
+ default:
+ usart_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+#endif /* RCC_CFGR3_USART1SW_PCLK1 */
+ break;
+ }
+ }
+#endif /* RCC_CFGR3_USART1SW */
+
+#if defined(RCC_CFGR3_USART2SW)
+ if (USARTxSource == LL_RCC_USART2_CLKSOURCE)
+ {
+ /* USART2CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+ if (USARTxSource == LL_RCC_USART3_CLKSOURCE)
+ {
+ /* USART3CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+
+#endif /* RCC_CFGR3_USART3SW */
+ return usart_frequency;
+}
+
+#if defined(UART4) || defined(UART5)
+/**
+ * @brief Return UARTx clock frequency
+ * @param UARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE
+ * @retval UART clock frequency (in Hz)
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource)
+{
+ uint32_t uart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_UART_CLKSOURCE(UARTxSource));
+
+#if defined(UART4)
+ if (UARTxSource == LL_RCC_UART4_CLKSOURCE)
+ {
+ /* UART4CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART4_CLKSOURCE_SYSCLK: /* UART4 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_HSI: /* UART4 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_LSE: /* UART4 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_PCLK1: /* UART4 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /* UART4 */
+
+#if defined(UART5)
+ if (UARTxSource == LL_RCC_UART5_CLKSOURCE)
+ {
+ /* UART5CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART5_CLKSOURCE_SYSCLK: /* UART5 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_HSI: /* UART5 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_LSE: /* UART5 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_PCLK1: /* UART5 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /* UART5 */
+
+ return uart_frequency;
+}
+#endif /* UART4 || UART5 */
+
+/**
+ * @brief Return I2Cx clock frequency
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices
+ * @retval I2C clock frequency (in Hz)
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready
+ */
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource)
+{
+ uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource));
+
+ /* I2C1 CLK clock frequency */
+ if (I2CxSource == LL_RCC_I2C1_CLKSOURCE)
+ {
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */
+ default:
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+ }
+ }
+
+#if defined(RCC_CFGR3_I2C2SW)
+ /* I2C2 CLK clock frequency */
+ if (I2CxSource == LL_RCC_I2C2_CLKSOURCE)
+ {
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C2_CLKSOURCE_SYSCLK: /* I2C2 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C2_CLKSOURCE_HSI: /* I2C2 Clock is HSI Osc. */
+ default:
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+ }
+ }
+#endif /*RCC_CFGR3_I2C2SW*/
+
+#if defined(RCC_CFGR3_I2C3SW)
+ /* I2C3 CLK clock frequency */
+ if (I2CxSource == LL_RCC_I2C3_CLKSOURCE)
+ {
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C3_CLKSOURCE_SYSCLK: /* I2C3 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C3_CLKSOURCE_HSI: /* I2C3 Clock is HSI Osc. */
+ default:
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+ }
+ }
+#endif /*RCC_CFGR3_I2C3SW*/
+
+ return i2c_frequency;
+}
+
+#if defined(RCC_CFGR_I2SSRC)
+/**
+ * @brief Return I2Sx clock frequency
+ * @param I2SxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2S_CLKSOURCE
+ * @retval I2S clock frequency (in Hz)
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that external clock is used */
+uint32_t LL_RCC_GetI2SClockFreq(uint32_t I2SxSource)
+{
+ uint32_t i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_I2S_CLKSOURCE(I2SxSource));
+
+ /* I2S1CLK clock frequency */
+ switch (LL_RCC_GetI2SClockSource(I2SxSource))
+ {
+ case LL_RCC_I2S_CLKSOURCE_SYSCLK: /*!< System clock selected as I2S clock source */
+ i2s_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2S_CLKSOURCE_PIN: /*!< External clock selected as I2S clock source */
+ default:
+ i2s_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+
+ return i2s_frequency;
+}
+#endif /* RCC_CFGR_I2SSRC */
+#if defined(USB)
+/**
+ * @brief Return USBx clock frequency
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval USB clock frequency (in Hz)
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
+ */
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource)
+{
+ uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource));
+
+ /* USBCLK clock frequency */
+ switch (LL_RCC_GetUSBClockSource(USBxSource))
+ {
+ case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ usb_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ break;
+
+ case LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5: /* PLL clock used as USB clock source */
+ default:
+ if (LL_RCC_PLL_IsReady())
+ {
+ usb_frequency = (RCC_PLL_GetFreqDomain_SYS() * 3U) / 2U;
+ }
+ break;
+ }
+
+ return usb_frequency;
+}
+#endif /* USB */
+
+#if defined(RCC_CFGR_ADCPRE) || defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+/**
+ * @brief Return ADCx clock frequency
+ * @param ADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSOURCE (*)
+ * @arg @ref LL_RCC_ADC1_CLKSOURCE (*)
+ * @arg @ref LL_RCC_ADC12_CLKSOURCE (*)
+ * @arg @ref LL_RCC_ADC34_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices
+ * @retval ADC clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource)
+{
+ uint32_t adc_prescaler = 0U;
+ uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource));
+
+ /* Get ADC prescaler */
+ adc_prescaler = LL_RCC_GetADCClockSource(ADCxSource);
+
+#if defined(RCC_CFGR_ADCPRE)
+ /* ADC frequency = PCLK2 frequency / ADC prescaler (2, 4, 6 or 8) */
+ adc_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()))
+ / (((adc_prescaler >> POSITION_VAL(ADCxSource)) + 1U) * 2U);
+#else
+ if ((adc_prescaler & 0x0000FFFFU) == ((uint32_t)0x00000000U))
+ {
+ /* ADC frequency = HCLK frequency */
+ adc_frequency = RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq());
+ }
+ else
+ {
+ /* ADC frequency = PCLK2 frequency / ADC prescaler (from 1 to 256) */
+ adc_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()))
+ / (aADCPrescTable[((adc_prescaler & 0x0000FFFFU) >> POSITION_VAL(ADCxSource)) & 0xFU]);
+ }
+#endif /* RCC_CFGR_ADCPRE */
+
+ return adc_frequency;
+}
+#endif /*RCC_CFGR_ADCPRE || RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRE12 || RCC_CFGR2_ADCPRE34 */
+
+#if defined(RCC_CFGR_SDPRE)
+/**
+ * @brief Return SDADCx clock frequency
+ * @param SDADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDADC_CLKSOURCE
+ * @retval SDADC clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetSDADCClockFreq(uint32_t SDADCxSource)
+{
+ uint32_t sdadc_prescaler = 0U;
+ uint32_t sdadc_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SDADC_CLKSOURCE(SDADCxSource));
+
+ /* Get SDADC prescaler */
+ sdadc_prescaler = LL_RCC_GetSDADCClockSource(SDADCxSource);
+
+ /* SDADC frequency = SYSTEM frequency / SDADC prescaler (from 2 to 48) */
+ sdadc_frequency = RCC_GetSystemClockFreq()
+ / (aSDADCPrescTable[(sdadc_prescaler >> POSITION_VAL(SDADCxSource)) & 0xFU]);
+
+ return sdadc_frequency;
+}
+#endif /*RCC_CFGR_SDPRE */
+
+#if defined(CEC)
+/**
+ * @brief Return CECx clock frequency
+ * @param CECxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE
+ * @retval CEC clock frequency (in Hz)
+ * @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (HSI or LSE) are not ready
+ */
+uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource)
+{
+ uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource));
+
+ /* CECCLK clock frequency */
+ switch (LL_RCC_GetCECClockSource(CECxSource))
+ {
+ case LL_RCC_CEC_CLKSOURCE_HSI_DIV244: /* HSI / 244 clock used as CEC clock source */
+ if (LL_RCC_HSI_IsReady())
+ {
+ cec_frequency = HSI_VALUE / 244U;
+ }
+ break;
+
+ case LL_RCC_CEC_CLKSOURCE_LSE: /* LSE clock used as CEC clock source */
+ default:
+ if (LL_RCC_LSE_IsReady())
+ {
+ cec_frequency = LSE_VALUE;
+ }
+ break;
+ }
+
+ return cec_frequency;
+}
+#endif /* CEC */
+
+#if defined(RCC_CFGR3_TIMSW)
+/**
+ * @brief Return TIMx clock frequency
+ * @param TIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_TIM1_CLKSOURCE
+ * @arg @ref LL_RCC_TIM8_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM15_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM16_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM17_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM20_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_TIM34_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices
+ * @retval TIM clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetTIMClockFreq(uint32_t TIMxSource)
+{
+ uint32_t tim_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_TIM_CLKSOURCE(TIMxSource));
+
+ if (TIMxSource == LL_RCC_TIM1_CLKSOURCE)
+ {
+ /* TIM1CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM1_CLKSOURCE) == LL_RCC_TIM1_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as TIM1 clock source */
+ tim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM1_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM1 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+
+#if defined(RCC_CFGR3_TIM8SW)
+ if (TIMxSource == LL_RCC_TIM8_CLKSOURCE)
+ {
+ /* TIM8CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM8_CLKSOURCE) == LL_RCC_TIM8_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as TIM8 clock source */
+ tim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM8_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM8 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM8SW*/
+
+#if defined(RCC_CFGR3_TIM15SW)
+ if (TIMxSource == LL_RCC_TIM15_CLKSOURCE)
+ {
+ /* TIM15CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM15_CLKSOURCE) == LL_RCC_TIM15_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as TIM15 clock source */
+ tim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM15_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM15 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM15SW*/
+
+#if defined(RCC_CFGR3_TIM16SW)
+ if (TIMxSource == LL_RCC_TIM16_CLKSOURCE)
+ {
+ /* TIM16CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM16_CLKSOURCE) == LL_RCC_TIM16_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as TIM16 clock source */
+ tim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM16_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM16 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM16SW*/
+
+#if defined(RCC_CFGR3_TIM17SW)
+ if (TIMxSource == LL_RCC_TIM17_CLKSOURCE)
+ {
+ /* TIM17CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM17_CLKSOURCE) == LL_RCC_TIM17_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as TIM17 clock source */
+ tim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM17_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM17 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM17SW*/
+
+#if defined(RCC_CFGR3_TIM20SW)
+ if (TIMxSource == LL_RCC_TIM20_CLKSOURCE)
+ {
+ /* TIM20CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM20_CLKSOURCE) == LL_RCC_TIM20_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as TIM20 clock source */
+ tim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM20_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM20 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM20SW*/
+
+#if defined(RCC_CFGR3_TIM2SW)
+ if (TIMxSource == LL_RCC_TIM2_CLKSOURCE)
+ {
+ /* TIM2CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM2_CLKSOURCE) == LL_RCC_TIM2_CLKSOURCE_PCLK1)
+ {
+ /* PCLK1 used as TIM2 clock source */
+ tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM2_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM2 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM2SW*/
+
+#if defined(RCC_CFGR3_TIM34SW)
+ if (TIMxSource == LL_RCC_TIM34_CLKSOURCE)
+ {
+ /* TIM3/4 CLK clock frequency */
+ if (LL_RCC_GetTIMClockSource(LL_RCC_TIM34_CLKSOURCE) == LL_RCC_TIM34_CLKSOURCE_PCLK1)
+ {
+ /* PCLK1 used as TIM3/4 clock source */
+ tim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_TIM34_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as TIM3/4 clock source */
+ tim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+ }
+#endif /*RCC_CFGR3_TIM34SW*/
+
+ return tim_frequency;
+}
+#endif /*RCC_CFGR3_TIMSW*/
+
+#if defined(HRTIM1)
+/**
+ * @brief Return HRTIMx clock frequency
+ * @param HRTIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_HRTIM1_CLKSOURCE
+ * @retval HRTIM clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetHRTIMClockFreq(uint32_t HRTIMxSource)
+{
+ uint32_t hrtim_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_HRTIM_CLKSOURCE(HRTIMxSource));
+
+ /* HRTIM1CLK clock frequency */
+ if (LL_RCC_GetHRTIMClockSource(LL_RCC_HRTIM1_CLKSOURCE) == LL_RCC_HRTIM1_CLKSOURCE_PCLK2)
+ {
+ /* PCLK2 used as HRTIM1 clock source */
+ hrtim_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ }
+ else /* LL_RCC_HRTIM1_CLKSOURCE_PLL */
+ {
+ /* PLL clock used as HRTIM1 clock source */
+ hrtim_frequency = RCC_PLL_GetFreqDomain_SYS();
+ }
+
+ return hrtim_frequency;
+}
+#endif /* HRTIM1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_LL_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Return SYSTEM clock frequency
+ * @retval SYSTEM clock frequency (in Hz)
+ */
+uint32_t RCC_GetSystemClockFreq(void)
+{
+ uint32_t frequency = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (LL_RCC_GetSysClkSource())
+ {
+ case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ frequency = HSI_VALUE;
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
+ frequency = HSE_VALUE;
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */
+ frequency = RCC_PLL_GetFreqDomain_SYS();
+ break;
+
+ default:
+ frequency = HSI_VALUE;
+ break;
+ }
+
+ return frequency;
+}
+
+/**
+ * @brief Return HCLK clock frequency
+ * @param SYSCLK_Frequency SYSCLK clock frequency
+ * @retval HCLK clock frequency (in Hz)
+ */
+uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
+{
+ /* HCLK clock frequency */
+ return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());
+}
+
+/**
+ * @brief Return PCLK1 clock frequency
+ * @param HCLK_Frequency HCLK clock frequency
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
+{
+ /* PCLK1 clock frequency */
+ return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());
+}
+
+/**
+ * @brief Return PCLK2 clock frequency
+ * @param HCLK_Frequency HCLK clock frequency
+ * @retval PCLK2 clock frequency (in Hz)
+ */
+uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency)
+{
+ /* PCLK2 clock frequency */
+ return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler());
+}
+
+/**
+ * @brief Return PLL clock frequency used for system domain
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_SYS(void)
+{
+ uint32_t pllinputfreq = 0U, pllsource = 0U;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL divider) * PLL Multiplicator */
+
+ /* Get PLL source */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE;
+#else
+ case LL_RCC_PLLSOURCE_HSI_DIV_2: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE / 2U;
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ pllinputfreq = HSI_VALUE;
+#else
+ pllinputfreq = HSI_VALUE / 2U;
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+ break;
+ }
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetMultiplicator(), LL_RCC_PLL_GetPrediv());
+#else
+ return __LL_RCC_CALC_PLLCLK_FREQ((pllinputfreq / (LL_RCC_PLL_GetPrediv() + 1U)), LL_RCC_PLL_GetMultiplicator());
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_usart.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_usart.c
new file mode 100644
index 00000000..7809ccb9
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_usart.c
@@ -0,0 +1,458 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_usart.c
+ * @author MCD Application Team
+ * @brief USART LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_ll_usart.h"
+#include "stm32f3xx_ll_rcc.h"
+#include "stm32f3xx_ll_bus.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5)
+
+/** @addtogroup USART_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup USART_LL_Private_Macros
+ * @{
+ */
+
+/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available
+ * divided by the smallest oversampling used on the USART (i.e. 8) */
+#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 9000000U)
+
+/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */
+#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U)
+
+/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */
+#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
+
+#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \
+ || ((__VALUE__) == LL_USART_DIRECTION_RX) \
+ || ((__VALUE__) == LL_USART_DIRECTION_TX) \
+ || ((__VALUE__) == LL_USART_DIRECTION_TX_RX))
+
+#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \
+ || ((__VALUE__) == LL_USART_PARITY_EVEN) \
+ || ((__VALUE__) == LL_USART_PARITY_ODD))
+
+#if defined(USART_7BITS_SUPPORT)
+#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \
+ || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \
+ || ((__VALUE__) == LL_USART_DATAWIDTH_9B))
+#else
+#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_8B) \
+ || ((__VALUE__) == LL_USART_DATAWIDTH_9B))
+#endif
+
+#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \
+ || ((__VALUE__) == LL_USART_OVERSAMPLING_8))
+
+#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \
+ || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT))
+
+#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \
+ || ((__VALUE__) == LL_USART_PHASE_2EDGE))
+
+#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \
+ || ((__VALUE__) == LL_USART_POLARITY_HIGH))
+
+#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \
+ || ((__VALUE__) == LL_USART_CLOCK_ENABLE))
+
+#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \
+ || ((__VALUE__) == LL_USART_STOPBITS_1) \
+ || ((__VALUE__) == LL_USART_STOPBITS_1_5) \
+ || ((__VALUE__) == LL_USART_STOPBITS_2))
+
+#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \
+ || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \
+ || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \
+ || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS))
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup USART_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief De-initialize USART registers (Registers restored to their default values).
+ * @param USARTx USART Instance
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: USART registers are de-initialized
+ * - ERROR: USART registers are not de-initialized
+ */
+ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(USARTx));
+
+ if (USARTx == USART1)
+ {
+ /* Force reset of USART clock */
+ LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_USART1);
+
+ /* Release reset of USART clock */
+ LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_USART1);
+ }
+ else if (USARTx == USART2)
+ {
+ /* Force reset of USART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART2);
+
+ /* Release reset of USART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART2);
+ }
+ else if (USARTx == USART3)
+ {
+ /* Force reset of USART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART3);
+
+ /* Release reset of USART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART3);
+ }
+#if defined(UART4)
+ else if (USARTx == UART4)
+ {
+ /* Force reset of UART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART4);
+
+ /* Release reset of UART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART4);
+ }
+#endif /* UART4 */
+#if defined(UART5)
+ else if (USARTx == UART5)
+ {
+ /* Force reset of UART clock */
+ LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_UART5);
+
+ /* Release reset of UART clock */
+ LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_UART5);
+ }
+#endif /* UART5 */
+ else
+ {
+ status = ERROR;
+ }
+
+ return (status);
+}
+
+/**
+ * @brief Initialize USART registers according to the specified
+ * parameters in USART_InitStruct.
+ * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
+ * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0).
+ * @param USARTx USART Instance
+ * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure
+ * that contains the configuration information for the specified USART peripheral.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: USART registers are initialized according to USART_InitStruct content
+ * - ERROR: Problem occurred during USART Registers initialization
+ */
+ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct)
+{
+ ErrorStatus status = ERROR;
+ uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO;
+#if defined(STM32F303x8)||defined(STM32F334x8)||defined(STM32F328xx)||defined(STM32F301x8)||defined(STM32F302x8)||defined(STM32F318xx)
+ LL_RCC_ClocksTypeDef RCC_Clocks;
+#endif
+
+ /* Check the parameters */
+ assert_param(IS_UART_INSTANCE(USARTx));
+ assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate));
+ assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth));
+ assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits));
+ assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity));
+ assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection));
+ assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl));
+ assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling));
+
+ /* USART needs to be in disabled state, in order to be able to configure some bits in
+ CRx registers */
+ if (LL_USART_IsEnabled(USARTx) == 0U)
+ {
+ /*---------------------------- USART CR1 Configuration ---------------------
+ * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters:
+ * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value
+ * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value
+ * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value
+ * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value.
+ */
+ MODIFY_REG(USARTx->CR1,
+ (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS |
+ USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8),
+ (USART_InitStruct->DataWidth | USART_InitStruct->Parity |
+ USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling));
+
+ /*---------------------------- USART CR2 Configuration ---------------------
+ * Configure USARTx CR2 (Stop bits) with parameters:
+ * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value.
+ * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit().
+ */
+ LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits);
+
+ /*---------------------------- USART CR3 Configuration ---------------------
+ * Configure USARTx CR3 (Hardware Flow Control) with parameters:
+ * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value.
+ */
+ LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl);
+
+ /*---------------------------- USART BRR Configuration ---------------------
+ * Retrieve Clock frequency used for USART Peripheral
+ */
+ if (USARTx == USART1)
+ {
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART1_CLKSOURCE);
+ }
+ else if (USARTx == USART2)
+ {
+#if defined (RCC_CFGR3_USART2SW)
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART2_CLKSOURCE);
+#else
+ /* USART2 clock is PCLK */
+ LL_RCC_GetSystemClocksFreq(&RCC_Clocks);
+ periphclk = RCC_Clocks.PCLK1_Frequency;
+#endif
+ }
+ else if (USARTx == USART3)
+ {
+#if defined (RCC_CFGR3_USART3SW)
+ periphclk = LL_RCC_GetUSARTClockFreq(LL_RCC_USART3_CLKSOURCE);
+#else
+ /* USART3 clock is PCLK */
+ LL_RCC_GetSystemClocksFreq(&RCC_Clocks);
+ periphclk = RCC_Clocks.PCLK1_Frequency;
+#endif
+ }
+#if defined(UART4)
+ else if (USARTx == UART4)
+ {
+ periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_UART4_CLKSOURCE);
+ }
+#endif /* UART4 */
+#if defined(UART5)
+ else if (USARTx == UART5)
+ {
+ periphclk = LL_RCC_GetUARTClockFreq(LL_RCC_UART5_CLKSOURCE);
+ }
+#endif /* UART5 */
+ else
+ {
+ /* Nothing to do, as error code is already assigned to ERROR value */
+ }
+
+ /* Configure the USART Baud Rate :
+ - valid baud rate value (different from 0) is required
+ - Peripheral clock as returned by RCC service, should be valid (different from 0).
+ */
+ if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO)
+ && (USART_InitStruct->BaudRate != 0U))
+ {
+ status = SUCCESS;
+ LL_USART_SetBaudRate(USARTx,
+ periphclk,
+ USART_InitStruct->OverSampling,
+ USART_InitStruct->BaudRate);
+
+ /* Check BRR is greater than or equal to 16d */
+ assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR));
+
+ /* Check BRR is greater than or equal to 16d */
+ assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR));
+ }
+ }
+ /* Endif (=> USART not in Disabled state => return ERROR) */
+
+ return (status);
+}
+
+/**
+ * @brief Set each @ref LL_USART_InitTypeDef field to default value.
+ * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure
+ * whose fields will be set to default values.
+ * @retval None
+ */
+
+void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct)
+{
+ /* Set USART_InitStruct fields to default values */
+ USART_InitStruct->BaudRate = 9600U;
+ USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B;
+ USART_InitStruct->StopBits = LL_USART_STOPBITS_1;
+ USART_InitStruct->Parity = LL_USART_PARITY_NONE ;
+ USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX;
+ USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE;
+ USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16;
+}
+
+/**
+ * @brief Initialize USART Clock related settings according to the
+ * specified parameters in the USART_ClockInitStruct.
+ * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
+ * USART IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @param USARTx USART Instance
+ * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure
+ * that contains the Clock configuration information for the specified USART peripheral.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content
+ * - ERROR: Problem occurred during USART Registers initialization
+ */
+ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check USART Instance and Clock signal output parameters */
+ assert_param(IS_UART_INSTANCE(USARTx));
+ assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput));
+
+ /* USART needs to be in disabled state, in order to be able to configure some bits in
+ CRx registers */
+ if (LL_USART_IsEnabled(USARTx) == 0U)
+ {
+ /*---------------------------- USART CR2 Configuration -----------------------*/
+ /* If Clock signal has to be output */
+ if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE)
+ {
+ /* Deactivate Clock signal delivery :
+ * - Disable Clock Output: USART_CR2_CLKEN cleared
+ */
+ LL_USART_DisableSCLKOutput(USARTx);
+ }
+ else
+ {
+ /* Ensure USART instance is USART capable */
+ assert_param(IS_USART_INSTANCE(USARTx));
+
+ /* Check clock related parameters */
+ assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity));
+ assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase));
+ assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse));
+
+ /*---------------------------- USART CR2 Configuration -----------------------
+ * Configure USARTx CR2 (Clock signal related bits) with parameters:
+ * - Enable Clock Output: USART_CR2_CLKEN set
+ * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value
+ * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value
+ * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value.
+ */
+ MODIFY_REG(USARTx->CR2,
+ USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL,
+ USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity |
+ USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
+ }
+ }
+ /* Else (USART not in Disabled state => return ERROR */
+ else
+ {
+ status = ERROR;
+ }
+
+ return (status);
+}
+
+/**
+ * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value.
+ * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure
+ * whose fields will be set to default values.
+ * @retval None
+ */
+void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
+{
+ /* Set LL_USART_ClockInitStruct fields with default values */
+ USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE;
+ USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* USART1 || USART2|| USART3 || UART4 || UART5 */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_utils.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_utils.c
new file mode 100644
index 00000000..33e72c20
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_utils.c
@@ -0,0 +1,583 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_utils.c
+ * @author MCD Application Team
+ * @brief UTILS LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_ll_rcc.h"
+#include "stm32f3xx_ll_utils.h"
+#include "stm32f3xx_ll_system.h"
+#include "stm32f3xx_ll_pwr.h"
+#ifdef USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F3xx_LL_Driver
+ * @{
+ */
+
+/** @addtogroup UTILS_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup UTILS_LL_Private_Constants
+ * @{
+ */
+
+/* Defines used for PLL range */
+#define UTILS_PLL_OUTPUT_MAX 72000000U /*!< Frequency max for PLL output, in Hz */
+
+/* Defines used for HSE range */
+#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */
+#define UTILS_HSE_FREQUENCY_MAX 32000000U /*!< Frequency max for HSE frequency, in Hz */
+
+/* Defines used for FLASH latency according to SYSCLK Frequency */
+#define UTILS_LATENCY1_FREQ 24000000U /*!< SYSCLK frequency to set FLASH latency 1 */
+#define UTILS_LATENCY2_FREQ 48000000U /*!< SYSCLK frequency to set FLASH latency 2 */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup UTILS_LL_Private_Macros
+ * @{
+ */
+#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \
+ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512))
+
+#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_2) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_4) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_8) \
+ || ((__VALUE__) == LL_RCC_APB1_DIV_16))
+
+#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_2) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_4) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_8) \
+ || ((__VALUE__) == LL_RCC_APB2_DIV_16))
+
+#define IS_LL_UTILS_PLLMUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_MUL_2) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_3) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_4) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_5) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_6) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_7) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_8) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_9) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_10) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_11) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_12) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_13) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_14) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_15) \
+ || ((__VALUE__) == LL_RCC_PLL_MUL_16))
+
+#define IS_LL_UTILS_PREDIV_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PREDIV_DIV_1) || ((__VALUE__) == LL_RCC_PREDIV_DIV_2) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_3) || ((__VALUE__) == LL_RCC_PREDIV_DIV_4) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_5) || ((__VALUE__) == LL_RCC_PREDIV_DIV_6) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_7) || ((__VALUE__) == LL_RCC_PREDIV_DIV_8) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_9) || ((__VALUE__) == LL_RCC_PREDIV_DIV_10) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_11) || ((__VALUE__) == LL_RCC_PREDIV_DIV_12) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_13) || ((__VALUE__) == LL_RCC_PREDIV_DIV_14) || \
+ ((__VALUE__) == LL_RCC_PREDIV_DIV_15) || ((__VALUE__) == LL_RCC_PREDIV_DIV_16))
+
+#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((__VALUE__) <= UTILS_PLL_OUTPUT_MAX)
+
+
+#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \
+ || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF))
+
+#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX))
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Functions UTILS Private functions
+ * @{
+ */
+static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct);
+#if defined(FLASH_ACR_LATENCY)
+static ErrorStatus UTILS_SetFlashLatency(uint32_t Frequency);
+#endif /* FLASH_ACR_LATENCY */
+static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+static ErrorStatus UTILS_PLL_IsBusy(void);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UTILS_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UTILS_LL_EF_DELAY
+ * @{
+ */
+
+/**
+ * @brief This function configures the Cortex-M SysTick source to have 1ms time base.
+ * @note When a RTOS is used, it is recommended to avoid changing the Systick
+ * configuration by calling this function, for a delay use rather osDelay RTOS service.
+ * @param HCLKFrequency HCLK frequency in Hz
+ * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq
+ * @retval None
+ */
+void LL_Init1msTick(uint32_t HCLKFrequency)
+{
+ /* Use frequency provided in argument */
+ LL_InitTick(HCLKFrequency, 1000U);
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on SysTick counter flag
+ * @note When a RTOS is used, it is recommended to avoid using blocking delay
+ * and use rather osDelay service.
+ * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which
+ * will configure Systick to 1ms
+ * @param Delay specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+void LL_mDelay(uint32_t Delay)
+{
+ __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */
+ /* Add this code to indicate that local variable is not used */
+ ((void)tmp);
+
+ /* Add a period to guaranty minimum wait */
+ if (Delay < LL_MAX_DELAY)
+ {
+ Delay++;
+ }
+
+ while (Delay)
+ {
+ if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U)
+ {
+ Delay--;
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup UTILS_EF_SYSTEM
+ * @brief System Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### System Configuration functions #####
+ ===============================================================================
+ [..]
+ System, AHB and APB buses clocks configuration
+
+ (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 72000000 Hz.
+ @endverbatim
+ @internal
+ Depending on the SYSCLK frequency, the flash latency should be adapted accordingly:
+ (++) +-----------------------------------------------+
+ (++) | Latency | SYSCLK clock frequency (MHz) |
+ (++) |---------------|-------------------------------|
+ (++) |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
+ (++) |---------------|-------------------------------|
+ (++) |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
+ (++) |---------------|-------------------------------|
+ (++) |2WS(3CPU cycle)| 48 < SYSCLK <= 72 |
+ (++) +-----------------------------------------------+
+ @endinternal
+ * @{
+ */
+
+/**
+ * @brief This function sets directly SystemCoreClock CMSIS variable.
+ * @note Variable can be calculated also through SystemCoreClockUpdate function.
+ * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
+ * @retval None
+ */
+void LL_SetSystemCoreClock(uint32_t HCLKFrequency)
+{
+ /* HCLK clock frequency */
+ SystemCoreClock = HCLKFrequency;
+}
+
+/**
+ * @brief This function configures system clock with HSI as clock source of the PLL
+ * @note The application need to ensure that PLL is disabled.
+ * @note Function is based on the following formula:
+ * - PLL output frequency = ((HSI frequency / PREDIV) * PLLMUL)
+ * - PREDIV: Set to 2 for few devices
+ * - PLLMUL: The application software must set correctly the PLL multiplication factor to
+ * not exceed 72MHz
+ * @note FLASH latency can be modified through this function.
+ * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
+ * the configuration information for the PLL.
+ * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
+ * the configuration information for the BUS prescalers.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Max frequency configuration done
+ * - ERROR: Max frequency configuration not done
+ */
+ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
+ LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ uint32_t pllfreq = 0U;
+
+ /* Check if one of the PLL is enabled */
+ if (UTILS_PLL_IsBusy() == SUCCESS)
+ {
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ /* Check PREDIV value */
+ assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv));
+#else
+ /* Force PREDIV value to 2 */
+ UTILS_PLLInitStruct->Prediv = LL_RCC_PREDIV_DIV_2;
+#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
+ /* Calculate the new PLL output frequency */
+ pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct);
+
+ /* Enable HSI if not enabled */
+ if (LL_RCC_HSI_IsReady() != 1U)
+ {
+ LL_RCC_HSI_Enable();
+ while (LL_RCC_HSI_IsReady() != 1U)
+ {
+ /* Wait for HSI ready */
+ }
+ }
+
+ /* Configure PLL */
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
+#else
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI_DIV_2, UTILS_PLLInitStruct->PLLMul);
+#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
+
+ /* Enable PLL and switch system clock to PLL */
+ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
+ }
+ else
+ {
+ /* Current PLL configuration cannot be modified */
+ status = ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief This function configures system clock with HSE as clock source of the PLL
+ * @note The application need to ensure that PLL is disabled.
+ * @note Function is based on the following formula:
+ * - PLL output frequency = ((HSI frequency / PREDIV) * PLLMUL)
+ * - PREDIV: Set to 2 for few devices
+ * - PLLMUL: The application software must set correctly the PLL multiplication factor to
+ * not exceed @ref UTILS_PLL_OUTPUT_MAX
+ * @note FLASH latency can be modified through this function.
+ * @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 32000000
+ * @param HSEBypass This parameter can be one of the following values:
+ * @arg @ref LL_UTILS_HSEBYPASS_ON
+ * @arg @ref LL_UTILS_HSEBYPASS_OFF
+ * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
+ * the configuration information for the PLL.
+ * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
+ * the configuration information for the BUS prescalers.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Max frequency configuration done
+ * - ERROR: Max frequency configuration not done
+ */
+ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ uint32_t pllfreq = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency));
+ assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass));
+
+ /* Check if one of the PLL is enabled */
+ if (UTILS_PLL_IsBusy() == SUCCESS)
+ {
+ /* Check PREDIV value */
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv));
+#else
+ assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->Prediv));
+#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
+
+ /* Calculate the new PLL output frequency */
+ pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct);
+
+ /* Enable HSE if not enabled */
+ if (LL_RCC_HSE_IsReady() != 1U)
+ {
+ /* Check if need to enable HSE bypass feature or not */
+ if (HSEBypass == LL_UTILS_HSEBYPASS_ON)
+ {
+ LL_RCC_HSE_EnableBypass();
+ }
+ else
+ {
+ LL_RCC_HSE_DisableBypass();
+ }
+
+ /* Enable HSE */
+ LL_RCC_HSE_Enable();
+ while (LL_RCC_HSE_IsReady() != 1U)
+ {
+ /* Wait for HSE ready */
+ }
+ }
+
+ /* Configure PLL */
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
+#else
+ LL_RCC_PLL_ConfigDomain_SYS((RCC_CFGR_PLLSRC_HSE_PREDIV | UTILS_PLLInitStruct->Prediv), UTILS_PLLInitStruct->PLLMul);
+#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
+
+ /* Enable PLL and switch system clock to PLL */
+ status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
+ }
+ else
+ {
+ /* Current PLL configuration cannot be modified */
+ status = ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UTILS_LL_Private_Functions
+ * @{
+ */
+/**
+ * @brief Update number of Flash wait states in line with new frequency and current
+ voltage range.
+ * @param Frequency SYSCLK frequency
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Latency has been modified
+ * - ERROR: Latency cannot be modified
+ */
+#if defined(FLASH_ACR_LATENCY)
+static ErrorStatus UTILS_SetFlashLatency(uint32_t Frequency)
+{
+ ErrorStatus status = SUCCESS;
+
+ uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */
+
+ /* Frequency cannot be equal to 0 */
+ if (Frequency == 0U)
+ {
+ status = ERROR;
+ }
+ else
+ {
+ if (Frequency > UTILS_LATENCY2_FREQ)
+ {
+ /* 48 < SYSCLK <= 72 => 2WS (3 CPU cycles) */
+ latency = LL_FLASH_LATENCY_2;
+ }
+ else
+ {
+ if (Frequency > UTILS_LATENCY1_FREQ)
+ {
+ /* 24 < SYSCLK <= 48 => 1WS (2 CPU cycles) */
+ latency = LL_FLASH_LATENCY_1;
+ }
+ /* else SYSCLK < 24MHz default LL_FLASH_LATENCY_0 0WS */
+ }
+
+ LL_FLASH_SetLatency(latency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if (LL_FLASH_GetLatency() != latency)
+ {
+ status = ERROR;
+ }
+ }
+ return status;
+}
+#endif /* FLASH_ACR_LATENCY */
+
+/**
+ * @brief Function to check that PLL can be modified
+ * @param PLL_InputFrequency PLL input frequency (in Hz)
+ * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
+ * the configuration information for the PLL.
+ * @retval PLL output frequency (in Hz)
+ */
+static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct)
+{
+ uint32_t pllfreq = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_LL_UTILS_PLLMUL_VALUE(UTILS_PLLInitStruct->PLLMul));
+
+ /* Check different PLL parameters according to RM */
+ /* The application software must set correctly the PLL multiplication factor to
+ not exceed @ref UTILS_PLL_OUTPUT_MAX */
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
+#else
+ pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency / (UTILS_PLLInitStruct->Prediv + 1U), UTILS_PLLInitStruct->PLLMul);
+#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
+ assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq));
+
+ return pllfreq;
+}
+
+/**
+ * @brief Function to check that PLL can be modified
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: PLL modification can be done
+ * - ERROR: PLL is busy
+ */
+static ErrorStatus UTILS_PLL_IsBusy(void)
+{
+ ErrorStatus status = SUCCESS;
+
+ /* Check if PLL is busy*/
+ if (LL_RCC_PLL_IsReady() != 0U)
+ {
+ /* PLL configuration cannot be modified */
+ status = ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Function to enable PLL and switch system clock to PLL
+ * @param SYSCLK_Frequency SYSCLK frequency
+ * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
+ * the configuration information for the BUS prescalers.
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: No problem to switch system to PLL
+ * - ERROR: Problem to switch system to PLL
+ */
+static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
+{
+ ErrorStatus status = SUCCESS;
+ uint32_t sysclk_frequency_current = 0U;
+
+ assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider));
+ assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider));
+ assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider));
+
+ /* Calculate current SYSCLK frequency */
+ sysclk_frequency_current = (SystemCoreClock << AHBPrescTable[LL_RCC_GetAHBPrescaler() >> RCC_POSITION_HPRE]);
+
+ /* Increasing the number of wait states because of higher CPU frequency */
+ if (sysclk_frequency_current < SYSCLK_Frequency)
+ {
+ /* Set FLASH latency to highest latency */
+ status = UTILS_SetFlashLatency(SYSCLK_Frequency);
+ }
+
+ /* Update system clock configuration */
+ if (status == SUCCESS)
+ {
+ /* Enable PLL */
+ LL_RCC_PLL_Enable();
+ while (LL_RCC_PLL_IsReady() != 1U)
+ {
+ /* Wait for PLL ready */
+ }
+
+ /* Sysclk activation on the main PLL */
+ LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
+ LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+ while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+ {
+ /* Wait for system clock switch to PLL */
+ }
+
+ /* Set APB1 & APB2 prescaler*/
+ LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider);
+ LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider);
+ }
+
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if (sysclk_frequency_current > SYSCLK_Frequency)
+ {
+ /* Set FLASH latency to lowest latency */
+ status = UTILS_SetFlashLatency(SYSCLK_Frequency);
+ }
+
+ /* Update SystemCoreClock variable */
+ if (status == SUCCESS)
+ {
+ LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider));
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_core.h
new file mode 100644
index 00000000..6550cd78
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_core.h
@@ -0,0 +1,167 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for usbd_core.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay (uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
new file mode 100644
index 00000000..66380fdc
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h
@@ -0,0 +1,113 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_req.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_def.h
new file mode 100644
index 00000000..969e3248
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_def.h
@@ -0,0 +1,330 @@
+/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief General defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
+#define USB_LEN_DEV_DESC 0x12
+#define USB_LEN_CFG_DESC 0x09
+#define USB_LEN_IF_DESC 0x09
+#define USB_LEN_EP_DESC 0x07
+#define USB_LEN_OTG_DESC 0x03
+#define USB_LEN_LANGID_STR_DESC 0x04
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
+
+#define USBD_IDX_LANGID_STR 0x00
+#define USBD_IDX_MFC_STR 0x01
+#define USBD_IDX_PRODUCT_STR 0x02
+#define USBD_IDX_SERIAL_STR 0x03
+#define USBD_IDX_CONFIG_STR 0x04
+#define USBD_IDX_INTERFACE_STR 0x05
+
+#define USB_REQ_TYPE_STANDARD 0x00
+#define USB_REQ_TYPE_CLASS 0x20
+#define USB_REQ_TYPE_VENDOR 0x40
+#define USB_REQ_TYPE_MASK 0x60
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00
+#define USB_REQ_RECIPIENT_INTERFACE 0x01
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02
+#define USB_REQ_RECIPIENT_MASK 0x03
+
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_DESC_TYPE_DEVICE 1
+#define USB_DESC_TYPE_CONFIGURATION 2
+#define USB_DESC_TYPE_STRING 3
+#define USB_DESC_TYPE_INTERFACE 4
+#define USB_DESC_TYPE_ENDPOINT 5
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
+#define USB_DESC_TYPE_BOS 0x0F
+
+#define USB_CONFIG_REMOTE_WAKEUP 2
+#define USB_CONFIG_SELF_POWERED 1
+
+#define USB_FEATURE_EP_HALT 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+#define USB_FEATURE_TEST_MODE 2
+
+#define USB_DEVICE_CAPABITY_TYPE 0x10
+
+#define USB_HS_MAX_PACKET_SIZE 512
+#define USB_FS_MAX_PACKET_SIZE 64
+#define USB_MAX_EP0_SIZE 64
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 1
+#define USBD_STATE_ADDRESSED 2
+#define USBD_STATE_CONFIGURED 3
+#define USBD_STATE_SUSPENDED 4
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0
+#define USBD_EP0_SETUP 1
+#define USBD_EP0_DATA_IN 2
+#define USBD_EP0_DATA_OUT 3
+#define USBD_EP0_STATUS_IN 4
+#define USBD_EP0_STATUS_OUT 5
+#define USBD_EP0_STALL 6
+
+#define USBD_EP_TYPE_CTRL 0
+#define USBD_EP_TYPE_ISOC 1
+#define USBD_EP_TYPE_BULK 2
+#define USBD_EP_TYPE_INTR 3
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
+ uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING == 1)
+ uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length);
+#endif
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0,
+ USBD_SPEED_FULL = 1,
+ USBD_SPEED_LOW = 2,
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+ USBD_OK = 0,
+ USBD_BUSY,
+ USBD_FAIL,
+}USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#if (USBD_LPM_ENABLED == 1)
+ uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[15];
+ USBD_EndpointTypeDef ep_out[15];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
+
+#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
+#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+#else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
new file mode 100644
index 00000000..dbf8ca19
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h
@@ -0,0 +1,128 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_IOREQ_H
+#define __USBD_IOREQ_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *buf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
+
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
+ uint8_t epnum);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_IOREQ_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_core.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_core.c
new file mode 100644
index 00000000..86fc2dec
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_core.c
@@ -0,0 +1,565 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+/**
+* @}
+*/
+
+
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initializes the device stack and load the class driver
+* @param pdev: device instance
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if(pdev == NULL)
+ {
+ USBD_ErrLog("Invalid Device handle");
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if(pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if(pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if(pclass != 0)
+ {
+ /* link the class to the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+ USBD_ErrLog("Invalid Class handle");
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
+{
+
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if(pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if(pdev->pClass->Init(pdev, cfgidx) == 0)
+ {
+ ret = USBD_OK;
+ }
+ }
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and De-initialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1F)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq (pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_out[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx (pdev,
+ pdata,
+ MIN(pep->rem_length ,pep->maxpacket));
+ }
+ else
+ {
+ if((pdev->pClass->EP0_RxReady != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ }
+ else if((pdev->pClass->DataOut != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_in[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData (pdev,
+ pdata,
+ pep->rem_length);
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ { /* last packet is MPS multiple, so send ZLP packet */
+ if((pep->total_length % pep->maxpacket == 0) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len ))
+ {
+
+ USBD_CtlContinueSendData(pdev , NULL, 0);
+ pdev->ep0_data_len = 0;
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ {
+ if((pdev->pClass->EP0_TxSent != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ if (pdev->dev_test_mode == 1)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0;
+ }
+ }
+ else if((pdev->pClass->DataIn != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev,
+ 0x00,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev,
+ 0x80,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+ /* Upon Reset call user call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ if (pdev->pClassData)
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+
+ return USBD_OK;
+}
+
+
+
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_state = pdev->dev_old_state;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if(pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if(pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c
new file mode 100644
index 00000000..7701a6d3
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ USBD_GetDescriptor (pdev, req) ;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress(pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus (pdev , req);
+ break;
+
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature (pdev , req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature (pdev , req);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ if((req->wLength == 0)&& (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ USBD_EndpointTypeDef *pep;
+ ep_addr = LOBYTE(req->wIndex);
+
+ /* Check if it is a class request */
+ if ((req->bmRequest & 0x60) == 0x20)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ return USBD_OK;
+ }
+
+ switch (req->bRequest)
+ {
+
+ case USB_REQ_SET_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+
+ }
+ }
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_ClearStallEP(pdev , ep_addr);
+ pdev->pClass->Setup (pdev, req);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
+ &pdev->ep_out[ep_addr & 0x7F];
+ if(USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001;
+ }
+ else
+ {
+ pep->status = 0x0000;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pep->status,
+ 2);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len;
+ uint8_t *pbuf;
+
+
+ switch (req->wValue >> 8)
+ {
+#if (USBD_LPM_ENABLED == 1)
+ case USB_DESC_TYPE_BOS:
+ pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
+ break;
+#endif
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ switch ((uint8_t)(req->wValue))
+ {
+ case USBD_IDX_LANGID_STR:
+ pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_MFC_STR:
+ pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_PRODUCT_STR:
+ pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_SERIAL_STR:
+ pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_CONFIG_STR:
+ pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_INTERFACE_STR:
+ pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ default:
+#if (USBD_SUPPORT_USER_STRING == 1)
+ pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len);
+ break;
+#else
+ USBD_CtlError(pdev , req);
+ return;
+#endif
+ }
+ break;
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len);
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ default:
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ if((len != 0)&& (req->wLength != 0))
+ {
+
+ len = MIN(len , req->wLength);
+
+ USBD_CtlSendData (pdev,
+ pbuf,
+ len);
+ }
+
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0) && (req->wLength == 0))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7F;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ static uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev , cfgidx);
+ USBD_CtlSendStatus(pdev);
+
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev , pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wLength != 1)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state )
+ {
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0;
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_default_config,
+ 1);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_config,
+ 1);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+#if ( USBD_SELF_POWERED == 1)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)& pdev->dev_config_status,
+ 2);
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *) (pdata);
+ req->bRequest = *(uint8_t *) (pdata + 1);
+ req->wValue = SWAPBYTE (pdata + 2);
+ req->wIndex = SWAPBYTE (pdata + 4);
+ req->wLength = SWAPBYTE (pdata + 6);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError( USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev , 0x80);
+ USBD_LL_StallEP(pdev , 0);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0;
+
+ if (desc != NULL)
+ {
+ *len = USBD_GetLen(desc) * 2 + 2;
+ unicode[idx++] = *len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0x00;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
new file mode 100644
index 00000000..d66d777d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
@@ -0,0 +1,236 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+ return USBD_OK;
+}
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
+{
+
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, NULL, 0);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive ( pdev,
+ 0,
+ NULL,
+ 0);
+
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: device instance
+* @param ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/stm32f3xx_hal_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/stm32f3xx_hal_conf.h
new file mode 100644
index 00000000..7c23191d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/stm32f3xx_hal_conf.h
@@ -0,0 +1,349 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CONF_H
+#define __STM32F3xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+
+#define HAL_MODULE_ENABLED
+/*#define HAL_ADC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_CAN_MODULE_ENABLED */
+/*#define HAL_CEC_MODULE_ENABLED */
+/*#define HAL_NAND_MODULE_ENABLED */
+/*#define HAL_NOR_MODULE_ENABLED */
+/*#define HAL_PCCARD_MODULE_ENABLED */
+/*#define HAL_SRAM_MODULE_ENABLED */
+/*#define HAL_HRTIM_MODULE_ENABLED */
+/*#define HAL_OPAMP_MODULE_ENABLED */
+/*#define HAL_SDADC_MODULE_ENABLED */
+/*#define HAL_TSC_MODULE_ENABLED */
+/*#define HAL_COMP_MODULE_ENABLED */
+/*#define HAL_CRC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_DAC_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+/*#define HAL_LCD_MODULE_ENABLED */
+/*#define HAL_LPTIM_MODULE_ENABLED */
+/*#define HAL_RNG_MODULE_ENABLED */
+/*#define HAL_RTC_MODULE_ENABLED */
+/*#define HAL_SPI_MODULE_ENABLED */
+/*#define HAL_TIM_MODULE_ENABLED */
+/*#define HAL_UART_MODULE_ENABLED */
+/*#define HAL_USART_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_SMARTCARD_MODULE_ENABLED */
+/*#define HAL_SMBUS_MODULE_ENABLED */
+/*#define HAL_WWDG_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief Time out for LSE start up value in ms.
+ */
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
+ * - External clock not generated on EVAL 373
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f3xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f3xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f3xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f3xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f3xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f3xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f3xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f3xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f3xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f3xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f3xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f3xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f3xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SDADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_sdadc.h"
+#endif /* HAL_SDADC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f3xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f3xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f3xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f3xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/system_stm32f3xx.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/system_stm32f3xx.c
new file mode 100644
index 00000000..895a7106
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/lib/system_stm32f3xx.c
@@ -0,0 +1,314 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f3xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f3xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F3xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB2 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * USB Clock | DISABLE
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f3xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and the PLL configuration is reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= 0x00000001U;
+
+ /* Reset CFGR register */
+ RCC->CFGR &= 0xF87FC00CU;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= 0xFEF6FFFFU;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= 0xFFFBFFFFU;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */
+ RCC->CFGR &= 0xFF80FFFFU;
+
+ /* Reset PREDIV1[3:0] bits */
+ RCC->CFGR2 &= 0xFFFFFFF0U;
+
+ /* Reset USARTSW[1:0], I2CSW and TIMs bits */
+ RCC->CFGR3 &= 0xFF00FCCCU;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000U;
+
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+ }
+ else
+ {
+ /* HSI oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSI_VALUE / predivfactor) * pllmull;
+ }
+#else
+ if (pllsource == RCC_CFGR_PLLSRC_HSI_DIV2)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+ }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/main.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/main.c
new file mode 100644
index 00000000..7cc9201d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/main.c
@@ -0,0 +1,229 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Boot\main.c
+* \brief Bootloader application source file.
+* \ingroup Boot_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "boot.h" /* bootloader generic header */
+#include "stm32f3xx.h" /* STM32 CPU and HAL header */
+#include "stm32f3xx_ll_rcc.h" /* STM32 LL RCC header */
+#include "stm32f3xx_ll_bus.h" /* STM32 LL BUS header */
+#include "stm32f3xx_ll_system.h" /* STM32 LL SYSTEM header */
+#include "stm32f3xx_ll_utils.h" /* STM32 LL UTILS header */
+#include "stm32f3xx_ll_usart.h" /* STM32 LL USART header */
+#include "stm32f3xx_ll_gpio.h" /* STM32 LL GPIO header */
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static void Init(void);
+static void SystemClock_Config(void);
+
+
+/************************************************************************************//**
+** \brief This is the entry point for the bootloader application and is called
+** by the reset interrupt vector after the C-startup routines executed.
+** \return Program return code.
+**
+****************************************************************************************/
+int main(void)
+{
+ /* initialize the microcontroller */
+ Init();
+ /* initialize the bootloader */
+ BootInit();
+
+ /* start the infinite program loop */
+ while (1)
+ {
+ /* run the bootloader task */
+ BootTask();
+ }
+
+ /* program should never get here */
+ return 0;
+} /*** end of main ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the microcontroller.
+** \return none.
+**
+****************************************************************************************/
+static void Init(void)
+{
+ /* HAL library initialization */
+ HAL_Init();
+ /* configure system clock */
+ SystemClock_Config();
+} /*** end of Init ***/
+
+
+/************************************************************************************//**
+** \brief System Clock Configuration. This code was created by CubeMX and configures
+** the system clock to match the configuration in the bootloader's
+** configuration (blt_conf.h), specifically the macros:
+** BOOT_CPU_SYSTEM_SPEED_KHZ and BOOT_CPU_XTAL_SPEED_KHZ.
+** Note that the Lower Layer drivers were selected in CubeMX for the RCC
+** subsystem.
+** \return none.
+**
+****************************************************************************************/
+static void SystemClock_Config(void)
+{
+ /* Set flash latency. */
+ LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
+ /* Verify flash latency setting. */
+ if(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_2)
+ {
+ /* Error setting flash latency. */
+ ASSERT_RT(BLT_FALSE);
+ }
+
+ /* Enable the HSE bypass clock. */
+ LL_RCC_HSE_EnableBypass();
+ LL_RCC_HSE_Enable();
+
+ /* Wait till HSE is ready */
+ while(LL_RCC_HSE_IsReady() != 1)
+ {
+ ;
+ }
+
+ /* Configure and enable the PLL. */
+ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9);
+ LL_RCC_PLL_Enable();
+ /* Wait till PLL is ready */
+ while(LL_RCC_PLL_IsReady() != 1)
+ {
+ ;
+ }
+ LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+ LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
+ LL_RCC_SetAPB2Prescaler(LL_RCC_APB1_DIV_1);
+ LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
+ /* Wait till System clock is ready */
+ while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
+ {
+ ;
+ }
+
+#if (BOOT_COM_USB_ENABLE > 0)
+ LL_RCC_SetUSBClockSource(LL_RCC_USB_CLKSOURCE_PLL_DIV_1_5);
+#endif
+ /* Update the system clock speed setting. */
+ LL_SetSystemCoreClock(BOOT_CPU_SYSTEM_SPEED_KHZ * 1000u);
+} /*** end of SystemClock_Config ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the Global MSP. This function is called from HAL_Init()
+** function to perform system level initialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspInit(void)
+{
+ LL_GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* SYSCFG clock enable. */
+ LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
+
+ /* GPIO ports clock enable. */
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOF);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
+ LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOE);
+
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* UART clock enable. */
+ LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART2);
+#endif
+
+ /* Configure GPIO pin for the LED. */
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_8;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ LL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+ LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
+
+ /* Configure GPIO pin for (optional) backdoor entry input. */
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_0;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_INPUT;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_DOWN;
+ LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* UART TX and RX GPIO pin configuration. */
+ GPIO_InitStruct.Pin = LL_GPIO_PIN_2|LL_GPIO_PIN_3;
+ GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
+ GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
+ GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
+ GPIO_InitStruct.Alternate = LL_GPIO_AF_7;
+ LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+#endif
+} /*** end of HAL_MspInit ***/
+
+
+/************************************************************************************//**
+** \brief DeInitializes the Global MSP. This function is called from HAL_DeInit()
+** function to perform system level de-initialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspDeInit(void)
+{
+ /* Reset GPIO pin for the LED to turn it off. */
+ LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
+
+ /* Deinit used GPIOs. */
+ LL_GPIO_DeInit(GPIOE);
+ LL_GPIO_DeInit(GPIOA);
+
+#if (BOOT_COM_UART_ENABLE > 0)
+ /* UART clock disable. */
+ LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USART2);
+
+#endif
+
+ /* GPIO ports clock disable. */
+ LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_GPIOE);
+ LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
+ LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_GPIOF);
+
+ /* SYSCFG clock disable. */
+ LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
+} /*** end of HAL_MspDeInit ***/
+
+
+/*********************************** end of main.c *************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/openblt_stm32f303.elf.launch b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/openblt_stm32f303.elf.launch
new file mode 100644
index 00000000..8da9cd8e
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/openblt_stm32f303.elf.launch
@@ -0,0 +1,40 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/startup_stm32f303xc.s b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/startup_stm32f303xc.s
new file mode 100644
index 00000000..9de82c57
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/startup_stm32f303xc.s
@@ -0,0 +1,471 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f303xc.s
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief STM32F303xB/STM32F303xC devices vector table for Atollic
+ * TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address,
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m4
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMP_STAMP_IRQHandler
+ .word RTC_WKUP_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_TSC_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN_TX_IRQHandler
+ .word USB_LP_CAN_RX0_IRQHandler
+ .word CAN_RX1_IRQHandler
+ .word CAN_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTC_Alarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word TIM8_BRK_IRQHandler
+ .word TIM8_UP_IRQHandler
+ .word TIM8_TRG_COM_IRQHandler
+ .word TIM8_CC_IRQHandler
+ .word ADC3_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word ADC4_IRQHandler
+ .word 0
+ .word 0
+ .word COMP1_2_3_IRQHandler
+ .word COMP4_5_6_IRQHandler
+ .word COMP7_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word USB_HP_IRQHandler
+ .word USB_LP_IRQHandler
+ .word USBWakeUp_RMP_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word FPU_IRQHandler
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_TSC_IRQHandler
+ .thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN_TX_IRQHandler
+ .thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN_RX0_IRQHandler
+ .thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+ .weak CAN_RX1_IRQHandler
+ .thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+ .weak CAN_SCE_IRQHandler
+ .thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_IRQHandler
+ .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_IRQHandler
+ .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_IRQHandler
+ .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak ADC3_IRQHandler
+ .thumb_set ADC3_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_IRQHandler
+ .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+ .weak ADC4_IRQHandler
+ .thumb_set ADC4_IRQHandler,Default_Handler
+
+ .weak COMP1_2_3_IRQHandler
+ .thumb_set COMP1_2_3_IRQHandler,Default_Handler
+
+ .weak COMP4_5_6_IRQHandler
+ .thumb_set COMP4_5_6_IRQHandler,Default_Handler
+
+ .weak COMP7_IRQHandler
+ .thumb_set COMP7_IRQHandler,Default_Handler
+
+ .weak USB_HP_IRQHandler
+ .thumb_set USB_HP_IRQHandler,Default_Handler
+
+ .weak USB_LP_IRQHandler
+ .thumb_set USB_LP_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_RMP_IRQHandler
+ .thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/stm32f30_flash.ld b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/stm32f30_flash.ld
new file mode 100644
index 00000000..054d17b8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/stm32f30_flash.ld
@@ -0,0 +1,198 @@
+/*
+******************************************************************************
+File: stm32f30_flash.ld
+Info: Generated by Atollic TrueSTUDIO(R) 9.0.0 2018-03-16
+
+Abstract: Linker script for STM32F303VC device
+ Set heap size, stack size, stack location, memory areas and
+ sections according to application requirements.
+
+The MIT License (MIT)
+Copyright (c) 2018 STMicroelectronics
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x2000a000; /* end of 40K RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x800; /* required amount of heap */
+_Min_Stack_Size = 0x800; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 16K
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K
+ MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
+ CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ _siccmram = LOADADDR(.ccmram);
+
+ /* CCM-RAM section
+ *
+ * IMPORTANT NOTE!
+ * If initialized variables will be placed in this section,
+ * the startup code needs to be modified to copy the init-values.
+ */
+ .ccmram :
+ {
+ . = ALIGN(4);
+ _sccmram = .; /* create a global symbol at ccmram start */
+ *(.ccmram)
+ *(.ccmram*)
+
+ . = ALIGN(4);
+ _eccmram = .; /* create a global symbol at ccmram end */
+ } >CCMRAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+ /* MEMORY_bank1 section, code must be located here explicitly */
+ /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
+ .memory_b1_text :
+ {
+ *(.mb1text) /* .mb1text sections (code) */
+ *(.mb1text*) /* .mb1text* sections (code) */
+ *(.mb1rodata) /* read-only data (constants) */
+ *(.mb1rodata*)
+ } >MEMORY_B1
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_bulk.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_bulk.c
new file mode 100644
index 00000000..2c60ddd7
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_bulk.c
@@ -0,0 +1,400 @@
+/**
+ ******************************************************************************
+ * @file usbd_bulk.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the high layer firmware functions to manage a
+ * USB bulk device.
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_bulk.h"
+#include "usbd_desc.h"
+#include "usbd_ctlreq.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_Bulk
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_Bulk_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_Bulk_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_Bulk_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_Bulk_Private_FunctionPrototypes
+ * @{
+ */
+extern void UsbReceivePipeBulkOUT(uint8_t epnum);
+extern void UsbTransmitPipeBulkIN(void);
+
+
+static uint8_t USBD_Bulk_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_Bulk_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_Bulk_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_Bulk_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_Bulk_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_Bulk_SOF (USBD_HandleTypeDef *pdev);
+
+static uint8_t *USBD_Bulk_GetFSCfgDesc (uint16_t *length);
+
+uint8_t *USBD_Bulk_GetDeviceQualifierDescriptor (uint16_t *length);
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_Bulk_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
+{
+ USB_LEN_DEV_QUALIFIER_DESC,
+ USB_DESC_TYPE_DEVICE_QUALIFIER,
+ 0x10,
+ 0x01,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x40,
+ 0x01,
+ 0x00,
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_Bulk_Private_Variables
+ * @{
+ */
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+__ALIGN_BEGIN static volatile uint32_t usbd_bulk_AltSet __ALIGN_END = 0;
+__ALIGN_BEGIN uint8_t USB_Rx_Buffer[BULK_DATA_MAX_PACKET_SIZE] __ALIGN_END ;
+
+
+/* Bulk interface class callbacks structure */
+USBD_ClassTypeDef USBD_Bulk =
+{
+ USBD_Bulk_Init,
+ USBD_Bulk_DeInit,
+ USBD_Bulk_Setup,
+ NULL,
+ NULL,
+ USBD_Bulk_DataIn,
+ USBD_Bulk_DataOut,
+ USBD_Bulk_SOF,
+ NULL,
+ NULL,
+ NULL,
+ USBD_Bulk_GetFSCfgDesc,
+ NULL,
+ USBD_Bulk_GetDeviceQualifierDescriptor,
+};
+
+/* USB Bulk device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_Bulk_CfgFSDesc[USB_BULK_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_BULK_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x01, /* bNumInterfaces: 1 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 100 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: One endpoints used */
+ 0xFF, /* bInterfaceClass: vendor specific */
+ 0x00, /* bInterfaceSubClass */
+ 0x00, /* bInterfaceProtocol */
+ 0x00, /* iInterface: */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ BULK_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(BULK_DATA_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(BULK_DATA_MAX_PACKET_SIZE),
+ 0xFF, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ BULK_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(BULK_DATA_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(BULK_DATA_MAX_PACKET_SIZE),
+ 0xFF /* bInterval: ignore for Bulk transfer */
+} ;
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_Bulk_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief USBD_Bulk_Init
+ * Initialize the Bulk interface
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_Bulk_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ BULK_IN_EP,
+ USBD_EP_TYPE_BULK,
+ BULK_DATA_FS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ BULK_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ BULK_DATA_FS_OUT_PACKET_SIZE);
+
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ BULK_OUT_EP,
+ &USB_Rx_Buffer[0],
+ BULK_DATA_FS_OUT_PACKET_SIZE);
+
+ return ret;
+}
+
+/**
+ * @brief USBD_Bulk_DeInit
+ * DeInitialize the Bulk layer
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_Bulk_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+
+ /* Close EP IN */
+ USBD_LL_CloseEP(pdev, BULK_IN_EP);
+
+ /* lose EP OUT */
+ USBD_LL_CloseEP(pdev, BULK_OUT_EP);
+
+ return ret;
+}
+
+/**
+ * @brief USBD_Bulk_Setup
+ * Handle the bulk specific requests
+ * @param pdev: instance
+ * @param req: usb requests
+ * @retval status
+ */
+static uint8_t USBD_Bulk_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len=USB_BULK_DESC_SIZ;
+ uint8_t *pbuf=USBD_Bulk_CfgFSDesc + 9;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_STANDARD:
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR :
+ if ( (req->wValue >> 8) == BULK_DESCRIPTOR_TYPE)
+ {
+ pbuf = USBD_Bulk_CfgFSDesc + 9 + (9 * USBD_MAX_NUM_INTERFACES);
+ len = MIN(USB_BULK_DESC_SIZ , req->wLength);
+
+ }
+ USBD_CtlSendData (pdev, pbuf, len);
+ break;
+
+ case USB_REQ_GET_INTERFACE :
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&usbd_bulk_AltSet,
+ 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE :
+ if ((uint8_t)(req->wValue) < USBD_MAX_NUM_INTERFACES)
+ {
+ usbd_bulk_AltSet = (uint8_t)(req->wValue);
+ }
+ else
+ {
+ /* Call the error management function (command will be nacked */
+ USBD_CtlError (pdev, req);
+ }
+ break;
+ }
+
+ default:
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Bulk_DataIn
+ * Data sent on non-control IN endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_Bulk_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ /* endpoint finished the previous transmission so see if more data is left */
+ UsbTransmitPipeBulkIN();
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Bulk_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_Bulk_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ /* read the data from the bulk OUT pipe */
+ UsbReceivePipeBulkOUT(epnum);
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Bulk_SOF
+ * Start Of Frame event management
+ * @param pdev: device instance
+ * @retval status
+ */
+static uint8_t USBD_Bulk_SOF (USBD_HandleTypeDef *pdev)
+{
+ if (pdev->dev_state == USBD_STATE_CONFIGURED )
+ {
+ /* Check the data to be sent through IN pipe */
+ UsbTransmitPipeBulkIN();
+ }
+ return USBD_OK;
+
+}
+
+/**
+ * @brief USBD_Bulk_GetFSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_Bulk_GetFSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_Bulk_CfgFSDesc);
+ return USBD_Bulk_CfgFSDesc;
+}
+
+/**
+* @brief DeviceQualifierDescriptor
+* return Device Qualifier descriptor
+* @param length : pointer data length
+* @retval pointer to descriptor buffer
+*/
+uint8_t *USBD_Bulk_GetDeviceQualifierDescriptor (uint16_t *length)
+{
+ *length = sizeof (USBD_Bulk_DeviceQualifierDesc);
+ return USBD_Bulk_DeviceQualifierDesc;
+}
+
+/**
+ * @brief USBD_Bulk_GetRxBufferPtr
+ * @retval Pointer to reception buffer.
+ */
+uint8_t * USBD_Bulk_GetRxBufferPtr(void)
+{
+ return &USB_Rx_Buffer[0];
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_bulk.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_bulk.h
new file mode 100644
index 00000000..6de35653
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_bulk.h
@@ -0,0 +1,120 @@
+/**
+ ******************************************************************************
+ * @file usbd_bulk.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief header file for the usbd_bulk.c file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2015 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CDC_H
+#define __USB_CDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup usbd_cdc
+ * @brief This file is the Header file for usbd_cdc.c
+ * @{
+ */
+
+
+/** @defgroup usbd_cdc_Exported_Defines
+ * @{
+ */
+#define BULK_IN_EP 0x81 /* EP1 for data IN */
+#define BULK_OUT_EP 0x01 /* EP1 for data OUT */
+
+/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
+#define BULK_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
+
+#define USB_BULK_CONFIG_DESC_SIZ 32
+#define USB_BULK_DESC_SIZ (32-9)
+
+#define BULK_DESCRIPTOR_TYPE 0x21
+
+
+#define BULK_DATA_FS_IN_PACKET_SIZE BULK_DATA_MAX_PACKET_SIZE
+#define BULK_DATA_FS_OUT_PACKET_SIZE BULK_DATA_MAX_PACKET_SIZE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+
+extern USBD_ClassTypeDef USBD_Bulk;
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Exported_Functions
+ * @{
+ */
+uint8_t * USBD_Bulk_GetRxBufferPtr(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_CDC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_conf.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_conf.c
new file mode 100644
index 00000000..d812cd79
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_conf.c
@@ -0,0 +1,763 @@
+/**
+ ******************************************************************************
+ * @file : usbd_conf.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the board support package for the USB device library
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+#include "stm32f3xx_hal.h"
+#include "usbd_def.h"
+#include "usbd_core.h"
+#include "usbd_bulk.h"
+#include "boot.h"
+#include "usb.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+PCD_HandleTypeDef hpcd_USB_FS;
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+/* USER CODE END PFP */
+
+/* Private functions ---------------------------------------------------------*/
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+
+/*******************************************************************************
+ LL Driver Callbacks (PCD -> USB Device Library)
+*******************************************************************************/
+/* MSP Init */
+
+void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+ if(pcdHandle->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspInit 0 */
+
+ /* USER CODE END USB_MspInit 0 */
+
+ /**USB GPIO Configuration
+ PA11 ------> USB_DM
+ PA12 ------> USB_DP
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF14_USB;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* Peripheral clock enable */
+ __HAL_RCC_USB_CLK_ENABLE();
+
+ /* USER CODE BEGIN USB_MspInit 1 */
+
+ /* USER CODE END USB_MspInit 1 */
+ }
+}
+
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
+{
+ if(pcdHandle->Instance==USB)
+ {
+ /* USER CODE BEGIN USB_MspDeInit 0 */
+
+ /* USER CODE END USB_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USB_CLK_DISABLE();
+
+ /**USB GPIO Configuration
+ PA11 ------> USB_DM
+ PA12 ------> USB_DP
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
+
+ /* USER CODE BEGIN USB_MspDeInit 1 */
+
+ /* USER CODE END USB_MspDeInit 1 */
+ }
+}
+
+/**
+ * @brief Setup stage callback
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
+}
+
+/**
+ * @brief Data Out stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief Data In stage callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
+}
+
+/**
+ * @brief SOF callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Reset callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
+
+ /* Set USB current speed. */
+ switch (hpcd->Init.speed)
+ {
+ case PCD_SPEED_FULL:
+ speed = USBD_SPEED_FULL;
+ break;
+
+ default:
+ speed = USBD_SPEED_FULL;
+ break;
+ }
+ USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
+
+ /* Reset Device. */
+ USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Suspend callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* Invoke hook function to allow the application to prepare entry into low power
+ * mode.
+ */
+ UsbEnterLowPowerModeHook();
+ /* Inform USB library that core enters in suspend Mode. */
+ USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
+ /* Enter in STOP mode. */
+ /* USER CODE BEGIN 2 */
+ if (hpcd->Init.low_power_enable)
+ {
+ /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
+ SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
+ }
+ /* USER CODE END 2 */
+}
+
+/**
+ * @brief Resume callback.
+ * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+ /* USER CODE BEGIN 3 */
+
+ /* USER CODE END 3 */
+ USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
+ /* Invoke hook function to allow the application to process exit from low power
+ * mode.
+ */
+ UsbLeaveLowPowerModeHook();
+}
+
+/**
+ * @brief ISOOUTIncomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+ * @brief ISOINIncomplete callback.
+ * @param hpcd: PCD handle
+ * @param epnum: Endpoint number
+ * @retval None
+ */
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+ USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
+}
+
+/**
+ * @brief Connect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/**
+ * @brief Disconnect callback.
+ * @param hpcd: PCD handle
+ * @retval None
+ */
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+ USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
+}
+
+/*******************************************************************************
+ LL Driver Interface (USB Device Library --> PCD)
+*******************************************************************************/
+
+/**
+ * @brief Initializes the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+ /* Init USB Ip. */
+ /* Link the driver to the stack. */
+ hpcd_USB_FS.pData = pdev;
+ pdev->pData = &hpcd_USB_FS;
+
+ hpcd_USB_FS.Instance = USB;
+ hpcd_USB_FS.Init.dev_endpoints = 8;
+ hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
+ hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_64;
+ hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
+ hpcd_USB_FS.Init.low_power_enable = DISABLE;
+ hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
+ if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
+ {
+ ASSERT_RT(BLT_FALSE);
+ }
+
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
+ HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_DeInit(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Starts the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_Start(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Stops the low level portion of the device driver.
+ * @param pdev: Device handle
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_Stop(pdev->pData);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Opens an endpoint of the low level driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param ep_type: Endpoint type
+ * @param ep_mps: Endpoint max packet size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Closes an endpoint of the low level driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
+
+ if((ep_addr & 0x80) == 0x80)
+ {
+ return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
+ }
+ else
+ {
+ return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
+ }
+}
+
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param dev_addr: Device address
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
+{
+ HAL_StatusTypeDef hal_status = HAL_OK;
+ USBD_StatusTypeDef usb_status = USBD_OK;
+
+ hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
+
+ switch (hal_status) {
+ case HAL_OK :
+ usb_status = USBD_OK;
+ break;
+ case HAL_ERROR :
+ usb_status = USBD_FAIL;
+ break;
+ case HAL_BUSY :
+ usb_status = USBD_BUSY;
+ break;
+ case HAL_TIMEOUT :
+ usb_status = USBD_FAIL;
+ break;
+ default :
+ usb_status = USBD_FAIL;
+ break;
+ }
+ return usb_status;
+}
+
+/**
+ * @brief Returns the last transfered packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
+}
+
+/**
+ * @brief Delays routine for the USB device library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay(uint32_t Delay)
+{
+ HAL_Delay(Delay);
+}
+
+/**
+ * @brief Software device connection
+ * @param hpcd: PCD handle
+ * @param state: Connection state (0: disconnected / 1: connected)
+ * @retval None
+ */
+void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
+{
+ /* USER CODE BEGIN 6 */
+ if (state == 1)
+ {
+ /* Configure Low connection state. */
+ UsbConnectHook(BLT_TRUE);
+ }
+ else
+ {
+ /* Configure High connection state. */
+ UsbConnectHook(BLT_FALSE);
+ }
+ /* USER CODE END 6 */
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_conf.h
new file mode 100644
index 00000000..c21938da
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_conf.h
@@ -0,0 +1,184 @@
+/**
+ ******************************************************************************
+ * @file : usbd_conf.h
+ * @version : v2.0_Cube
+ * @brief : Header for usbd_conf.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include
+#include
+#include
+#include "stm32f3xx.h"
+#include "stm32f3xx_hal.h"
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup USBD_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USBD_CONF USBD_CONF
+ * @brief Configuration file for Usb otg low level driver.
+ * @{
+ */
+
+/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
+ * @brief Defines for configuration of the Usb device.
+ * @{
+ */
+
+/*---------- -----------*/
+#define USBD_MAX_NUM_INTERFACES 1
+/*---------- -----------*/
+#define USBD_MAX_NUM_CONFIGURATION 1
+/*---------- -----------*/
+#define USBD_MAX_STR_DESC_SIZ 512
+/*---------- -----------*/
+#define USBD_SUPPORT_USER_STRING 0
+/*---------- -----------*/
+#define USBD_DEBUG_LEVEL 0
+/*---------- -----------*/
+#define USBD_SELF_POWERED 1
+
+/****************************************/
+/* #define for FS and HS identification */
+#define DEVICE_FS 0
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+
+/* DEBUG macros */
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...) printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...) printf("ERROR: ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...) printf("DEBUG : ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
+ * @brief Types.
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
+ * @brief Declaration of public functions for Usb device.
+ * @{
+ */
+
+/* Exported functions -------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_desc.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_desc.c
new file mode 100644
index 00000000..36990052
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_desc.c
@@ -0,0 +1,354 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.c
+ * @version : v2.0_Cube
+ * @brief : This file implements the USB device descriptors.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE END PV */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @addtogroup USBD_DESC
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
+ * @brief Private types.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_TYPES */
+
+/* USER CODE END PRIVATE_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
+ * @brief Private defines.
+ * @{
+ */
+
+#define USBD_VID 0x1d50
+#define USBD_LANGID_STRING 1033
+#define USBD_MANUFACTURER_STRING "OpenBLT User"
+#define USBD_PID_FS 0x60ac
+#define USBD_PRODUCT_STRING_FS "WinUSB Bulk Device"
+#define USBD_SERIALNUMBER_STRING_FS "00000000050C"
+#define USBD_CONFIGURATION_STRING_FS "Default"
+#define USBD_INTERFACE_STRING_FS "WinUSB Bulk Interface"
+
+/* USER CODE BEGIN PRIVATE_DEFINES */
+
+/* USER CODE END PRIVATE_DEFINES */
+
+/**
+ * @}
+ */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
+ * @brief Private macros.
+ * @{
+ */
+
+/* USER CODE BEGIN PRIVATE_MACRO */
+
+/* USER CODE END PRIVATE_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
+ * @brief Private functions declaration.
+ * @{
+ */
+
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_FS_USRStringDesc(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+USBD_DescriptorsTypeDef FS_Desc =
+{
+ USBD_FS_DeviceDescriptor
+, USBD_FS_LangIDStrDescriptor
+, USBD_FS_ManufacturerStrDescriptor
+, USBD_FS_ProductStrDescriptor
+, USBD_FS_SerialStrDescriptor
+, USBD_FS_ConfigStrDescriptor
+, USBD_FS_InterfaceStrDescriptor
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/** USB standard device descriptor. */
+__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
+{
+ 0x12, /*bLength */
+ USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
+ 0x10, /*bcdUSB */
+ 0x01,
+ 0x00, /*bDeviceClass*/
+ 0x00, /*bDeviceSubClass*/
+ 0x00, /*bDeviceProtocol*/
+ USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
+ LOBYTE(USBD_VID), /*idVendor*/
+ HIBYTE(USBD_VID), /*idVendor*/
+ LOBYTE(USBD_PID_FS), /*idProduct*/
+ HIBYTE(USBD_PID_FS), /*idProduct*/
+ 0x00, /*bcdDevice rel. 2.00*/
+ 0x01,
+ USBD_IDX_MFC_STR, /*Index of manufacturer string*/
+ USBD_IDX_PRODUCT_STR, /*Index of product string*/
+ USBD_IDX_SERIAL_STR, /*Index of serial number string*/
+ USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
+};
+
+/* USB_DeviceDescriptor */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
+ * @brief Private variables.
+ * @{
+ */
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+
+/** USB lang indentifier descriptor. */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
+{
+ USB_LEN_LANGID_STR_DESC,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING)
+};
+
+#if defined ( __ICCARM__ ) /* IAR Compiler */
+ #pragma data_alignment=4
+#endif /* defined ( __ICCARM__ ) */
+/* Internal string descriptor. */
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
+ * @brief Private functions.
+ * @{
+ */
+
+/**
+ * @brief Return the device descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_FS_DeviceDesc);
+ return USBD_FS_DeviceDesc;
+}
+
+/**
+ * @brief Return the LangID string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return USBD_LangIDDesc;
+}
+
+/**
+ * @brief Return the product string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the manufacturer string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the serial number string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the configuration string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Return the interface string descriptor
+ * @param speed : Current device speed
+ * @param length : Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_desc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_desc.h
new file mode 100644
index 00000000..9abf0aff
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/usbd_desc.h
@@ -0,0 +1,156 @@
+/**
+ ******************************************************************************
+ * @file : usbd_desc.h
+ * @version : v2.0_Cube
+ * @brief : Header for usbd_desc.c file.
+ ******************************************************************************
+ * This notice applies to any and all portions of this file
+ * that are not between comment pairs USER CODE BEGIN and
+ * USER CODE END. Other portions of this file, whether
+ * inserted by the user or by software development tools
+ * are owned by their respective copyright owners.
+ *
+ * Copyright (c) 2018 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC__H__
+#define __USBD_DESC__H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/* USER CODE BEGIN INCLUDE */
+
+/* USER CODE END INCLUDE */
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_DESC USBD_DESC
+ * @brief Usb device descriptors module.
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
+ * @brief Defines.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_DEFINES */
+
+/* USER CODE END EXPORTED_DEFINES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
+ * @brief Types.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_TYPES */
+
+/* USER CODE END EXPORTED_TYPES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
+ * @brief Aliases.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_MACRO */
+
+/* USER CODE END EXPORTED_MACRO */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
+ * @brief Public variables.
+ * @{
+ */
+
+/** Descriptor for the Usb device. */
+extern USBD_DescriptorsTypeDef FS_Desc;
+
+/* USER CODE BEGIN EXPORTED_VARIABLES */
+
+/* USER CODE END EXPORTED_VARIABLES */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
+ * @brief Public functions declaration.
+ * @{
+ */
+
+/* USER CODE BEGIN EXPORTED_FUNCTIONS */
+
+/* USER CODE END EXPORTED_FUNCTIONS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DESC__H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.cproject b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.cproject
new file mode 100644
index 00000000..f53ad4e3
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.cproject
@@ -0,0 +1,128 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.project b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.project
new file mode 100644
index 00000000..aa7f79b4
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.project
@@ -0,0 +1,26 @@
+
+
+ Prog
+
+
+
+
+
+ org.eclipse.cdt.managedbuilder.core.genmakebuilder
+ clean,full,incremental,
+
+
+
+
+ org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder
+ full,incremental,
+
+
+
+
+
+ org.eclipse.cdt.core.cnature
+ org.eclipse.cdt.managedbuilder.core.managedBuildNature
+ org.eclipse.cdt.managedbuilder.core.ScannerConfigNature
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs
new file mode 100644
index 00000000..8a85c903
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/com.atollic.truestudio.debug.hardware_device.prefs
@@ -0,0 +1,11 @@
+BOARD=None
+CODE_LOCATION=FLASH
+ENDIAN=Little-endian
+MCU=STM32F303VC
+MCU_VENDOR=STMicroelectronics
+MODEL=Pro
+PROBE=ST-LINK
+PROJECT_FORMAT_VERSION=2
+TARGET=STM32
+VERSION=9.0.0
+eclipse.preferences.version=1
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/language.settings.xml b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/language.settings.xml
new file mode 100644
index 00000000..ba91ec37
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/language.settings.xml
@@ -0,0 +1,13 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs
new file mode 100644
index 00000000..bdba3b4f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.core.prefs
@@ -0,0 +1,164 @@
+eclipse.preferences.version=1
+org.eclipse.cdt.core.formatter.alignment_for_arguments_in_method_invocation=16
+org.eclipse.cdt.core.formatter.alignment_for_assignment=16
+org.eclipse.cdt.core.formatter.alignment_for_base_clause_in_type_declaration=80
+org.eclipse.cdt.core.formatter.alignment_for_binary_expression=16
+org.eclipse.cdt.core.formatter.alignment_for_compact_if=16
+org.eclipse.cdt.core.formatter.alignment_for_conditional_expression=34
+org.eclipse.cdt.core.formatter.alignment_for_conditional_expression_chain=18
+org.eclipse.cdt.core.formatter.alignment_for_constructor_initializer_list=0
+org.eclipse.cdt.core.formatter.alignment_for_declarator_list=16
+org.eclipse.cdt.core.formatter.alignment_for_enumerator_list=48
+org.eclipse.cdt.core.formatter.alignment_for_expression_list=0
+org.eclipse.cdt.core.formatter.alignment_for_expressions_in_array_initializer=16
+org.eclipse.cdt.core.formatter.alignment_for_member_access=0
+org.eclipse.cdt.core.formatter.alignment_for_overloaded_left_shift_chain=16
+org.eclipse.cdt.core.formatter.alignment_for_parameters_in_method_declaration=16
+org.eclipse.cdt.core.formatter.alignment_for_throws_clause_in_method_declaration=16
+org.eclipse.cdt.core.formatter.brace_position_for_array_initializer=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_block=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_block_in_case=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_method_declaration=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_namespace_declaration=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_switch=next_line
+org.eclipse.cdt.core.formatter.brace_position_for_type_declaration=next_line
+org.eclipse.cdt.core.formatter.comment.line_up_line_comment_in_blocks_on_first_column=false
+org.eclipse.cdt.core.formatter.comment.min_distance_between_code_and_line_comment=1
+org.eclipse.cdt.core.formatter.comment.never_indent_line_comments_on_first_column=true
+org.eclipse.cdt.core.formatter.comment.preserve_white_space_between_code_and_line_comments=true
+org.eclipse.cdt.core.formatter.compact_else_if=true
+org.eclipse.cdt.core.formatter.continuation_indentation=2
+org.eclipse.cdt.core.formatter.continuation_indentation_for_array_initializer=2
+org.eclipse.cdt.core.formatter.format_guardian_clause_on_one_line=false
+org.eclipse.cdt.core.formatter.indent_access_specifier_compare_to_type_header=false
+org.eclipse.cdt.core.formatter.indent_access_specifier_extra_spaces=0
+org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_access_specifier=true
+org.eclipse.cdt.core.formatter.indent_body_declarations_compare_to_namespace_header=false
+org.eclipse.cdt.core.formatter.indent_breaks_compare_to_cases=true
+org.eclipse.cdt.core.formatter.indent_declaration_compare_to_template_header=false
+org.eclipse.cdt.core.formatter.indent_empty_lines=false
+org.eclipse.cdt.core.formatter.indent_statements_compare_to_block=true
+org.eclipse.cdt.core.formatter.indent_statements_compare_to_body=true
+org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_cases=true
+org.eclipse.cdt.core.formatter.indent_switchstatements_compare_to_switch=false
+org.eclipse.cdt.core.formatter.indentation.size=2
+org.eclipse.cdt.core.formatter.insert_new_line_after_opening_brace_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_after_template_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_at_end_of_file_if_missing=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_catch_in_try_statement=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_closing_brace_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_colon_in_constructor_initializer_list=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_else_in_if_statement=insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_identifier_in_function_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_before_while_in_do_statement=do not insert
+org.eclipse.cdt.core.formatter.insert_new_line_in_empty_block=insert
+org.eclipse.cdt.core.formatter.insert_space_after_assignment_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_after_binary_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_arguments=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_angle_bracket_in_template_parameters=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_brace_in_block=insert
+org.eclipse.cdt.core.formatter.insert_space_after_closing_paren_in_cast=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_base_clause=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_case=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_after_colon_in_labeled_statement=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_base_types=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_declarator_list=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_enum_declarations=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_expression_list=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_parameters=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_declaration_throws=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_method_invocation_arguments=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_arguments=insert
+org.eclipse.cdt.core.formatter.insert_space_after_comma_in_template_parameters=insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_angle_bracket_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_brace_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_bracket=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_cast=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_catch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_exception_specification=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_for=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_if=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_parenthesized_expression=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_switch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_opening_paren_in_while=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_postfix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_prefix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_after_question_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_after_semicolon_in_for=insert
+org.eclipse.cdt.core.formatter.insert_space_after_unary_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_assignment_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_before_binary_operator=insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_angle_bracket_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_brace_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_bracket=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_cast=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_catch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_exception_specification=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_for=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_if=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_parenthesized_expression=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_switch=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_closing_paren_in_while=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_base_clause=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_case=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_default=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_colon_in_labeled_statement=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_base_types=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_declarator_list=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_enum_declarations=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_expression_list=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_declaration_throws=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_method_invocation_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_comma_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_arguments=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_angle_bracket_in_template_parameters=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_array_initializer=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_block=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_method_declaration=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_namespace_declaration=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_switch=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_brace_in_type_declaration=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_bracket=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_catch=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_exception_specification=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_for=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_if=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_parenthesized_expression=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_switch=insert
+org.eclipse.cdt.core.formatter.insert_space_before_opening_paren_in_while=insert
+org.eclipse.cdt.core.formatter.insert_space_before_postfix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_prefix_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_question_in_conditional=insert
+org.eclipse.cdt.core.formatter.insert_space_before_semicolon=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_semicolon_in_for=do not insert
+org.eclipse.cdt.core.formatter.insert_space_before_unary_operator=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_braces_in_array_initializer=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_brackets=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_exception_specification=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_declaration=do not insert
+org.eclipse.cdt.core.formatter.insert_space_between_empty_parens_in_method_invocation=do not insert
+org.eclipse.cdt.core.formatter.join_wrapped_lines=true
+org.eclipse.cdt.core.formatter.keep_else_statement_on_same_line=false
+org.eclipse.cdt.core.formatter.keep_empty_array_initializer_on_one_line=false
+org.eclipse.cdt.core.formatter.keep_imple_if_on_one_line=false
+org.eclipse.cdt.core.formatter.keep_then_statement_on_same_line=false
+org.eclipse.cdt.core.formatter.lineSplit=89
+org.eclipse.cdt.core.formatter.number_of_empty_lines_to_preserve=1
+org.eclipse.cdt.core.formatter.put_empty_statement_on_new_line=true
+org.eclipse.cdt.core.formatter.tabulation.char=space
+org.eclipse.cdt.core.formatter.tabulation.size=2
+org.eclipse.cdt.core.formatter.use_tabs_only_for_leading_indentations=false
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs
new file mode 100644
index 00000000..4a97956c
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.managedbuilder.core.prefs
@@ -0,0 +1,11 @@
+eclipse.preferences.version=1
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.280166515/CPATH/delimiter=;
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.280166515/CPATH/operation=remove
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.280166515/C_INCLUDE_PATH/delimiter=;
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.280166515/C_INCLUDE_PATH/operation=remove
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.280166515/append=true
+environment/buildEnvironmentInclude/com.atollic.truestudio.exe.debug.280166515/appendContributed=true
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.280166515/LIBRARY_PATH/delimiter=;
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.280166515/LIBRARY_PATH/operation=remove
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.280166515/append=true
+environment/buildEnvironmentLibrary/com.atollic.truestudio.exe.debug.280166515/appendContributed=true
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs
new file mode 100644
index 00000000..7da732ea
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/.settings/org.eclipse.cdt.ui.prefs
@@ -0,0 +1,3 @@
+eclipse.preferences.version=1
+formatter_profile=_Feaser
+formatter_settings_version=1
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/Debug/demoprog_stm32f303.elf b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/Debug/demoprog_stm32f303.elf
new file mode 100755
index 00000000..1d6019fa
Binary files /dev/null and b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/Debug/demoprog_stm32f303.elf differ
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/Debug/demoprog_stm32f303.srec b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/Debug/demoprog_stm32f303.srec
new file mode 100755
index 00000000..f81f9ca8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/Debug/demoprog_stm32f303.srec
@@ -0,0 +1,269 @@
+S01A000064656D6F70726F675F73746D3332663330332E7372656399
+S3150800400000A00020554F0008A54F0008A54F00083E
+S31508004010A54F0008A54F0008A54F0008000000009E
+S31508004020000000000000000000000000A54F000886
+S31508004030A54F000800000000A54F0008DD4F000846
+S31508004040A54F0008A54F0008A54F0008A54F000872
+S31508004050A54F0008A54F0008A54F0008A54F000862
+S31508004060A54F0008A54F0008A54F0008A54F000852
+S31508004070A54F0008A54F0008A54F0008A54F000842
+S31508004080A54F0008A54F0008A54F0008A54F000832
+S31508004090A54F0008A54F0008A54F0008A54F000822
+S315080040A0A54F0008A54F0008A54F0008A54F000812
+S315080040B0A54F0008A54F0008A54F0008A54F000802
+S315080040C0A54F0008A54F0008A54F0008A54F0008F2
+S315080040D0A54F0008A54F0008A54F0008A54F0008E2
+S315080040E0A54F0008A54F0008A54F0008A54F0008D2
+S315080040F0A54F0008A54F0008A54F0008A54F0008C2
+S31508004100000000000000000000000000A54F0008A5
+S31508004110A54F0008A54F0008A54F0008A54F0008A1
+S31508004120A54F0008A54F0008A54F0008A54F000891
+S31508004130A54F0008A54F0008000000000000000079
+S31508004140A54F0008A54F0008A54F0008000000006D
+S315080041500000000000000000000000000000000051
+S315080041600000000000000000A54F0008A54F000849
+S31508004170A54F000800000000000000000000000035
+S3110800418000000000A54F0008EE11AA552B
+S3150800418C10B5054C237833B9044B13B10448AFF377
+S3150800419C00800123237010BD0400002000000000DD
+S315080041AC3050000808B5034B1BB103490348AFF35D
+S315080041BC008008BD000000000800002030500008F0
+S315080041CC08B500224FF48071014800F0A1F908BD2A
+S315080041DC0010004810B500F0F7FE0F4B1B68C31A09
+S315080041ECB3F5FA7F0DD304460C4B1B7853B9012251
+S315080041FC0A4B1A704FF48071094800F089F9064B7E
+S3150800420C1C6010BD0022054B1A704FF480710448CF
+S3150800421C00F07EF9F3E700BF240000202000002000
+S3150800422C0010004810B50446074B1868074BA3FB4B
+S3150800423C0030800900F070F8002221464FF0FF305C
+S3150800424C00F038F8002010BD00000020D34D621095
+S3150800425C08B5074A136843F010031360032000F0EF
+S3150800426C17F80020FFF7DEFF00F0F6FD002008BD6A
+S3150800427C00200240024A136801331360704700BFDE
+S3150800428C28000020014B1868704700BF2800002042
+S3150800429C074AD36823F4E0631B041B0C000200F4E2
+S315080042ACE060184340F0BF6040F40030D0607047BF
+S315080042BC00ED00E030B4164BDB68C3F30223C3F100
+S315080042CC0704042C28BF04241D1D062D17D9033BEF
+S315080042DC012505FA04F4013C2140994005FA03F33B
+S315080042EC013B1340194300280BDB0901C9B200F145
+S315080042FC604000F5614080F8001330BC704700231D
+S3150800430CE6E700F00F000901C9B2024B1954F4E7AD
+S3150800431C00ED00E014ED00E00138B0F1807F0AD220
+S3150800432C064B5860F021064A82F823100020986044
+S3150800433C07221A6070470120704700BF10E000E0A2
+S3150800434C00ED00E0042805D0054A136823F00403A1
+S3150800435C13607047024A136843F0040313607047EE
+S3150800436C10E000E0704708B5FFF7FCFF08BD000039
+S3150800437CF0B583B000238CE0DE08083650F82640EA
+S3150800438C03F0070E4FEA8E0E0F2707FA0EF724EAEC
+S3150800439C07040F6907FA0EF73C4340F8264087E0F6
+S315080043AC86682640CF6807FA0EF73E43866046684D
+S315080043BC26EA05054E68C6F300169E403543456049
+S315080043CCC5682C408D6805FA0EF52C43C4604C68FC
+S315080043DC14F0805F5CD04A4CA56945F00105A561CF
+S315080043ECA46904F001040194019C9D08AE1C454C7B
+S315080043FC54F8264003F00306B6000F27B74024EA04
+S3150800440C0704B0F1904F70D03F4FB8426FD007F504
+S3150800441C8067B8426DD007F58067B8426BD007F550
+S3150800442C8067B8425FD0052707FA06F6344302358B
+S3150800443C344E46F82540354C2568D44305EA04061F
+S3150800444C4F6817F4803F01D042EA05062F4D2E60BF
+S3150800445C6D6804EA05064F6817F4003F01D042EA76
+S3150800446C05062A4D6E60AD6804EA05064F6817F412
+S3150800447C801F01D042EA0506244DAE60ED682C403B
+S3150800448C4E6816F4001F01D042EA05041F4AD46090
+S3150800449C01330A6832FA03F42FD001259D402A40CD
+S315080044ACF6D04C68022C3FF467AF122C3FF464AF7D
+S315080044BC06684FEA430E032404FA0EF4E443264036
+S315080044CC4F6807F0030707FA0EF73E4306604E6877
+S315080044DC771E012F7FF664AF112E3FF461AF122EB3
+S315080044EC7FF46EAF5CE704279EE700279CE701275D
+S315080044FC9AE7022798E7032796E703B0F0BD00BFB3
+S3150800450C001002400000014000040048000401406D
+S3150800451C0AB98162704781617047000070B582B034
+S3150800452C0446036813F0010F63D0B54B5B6803F0C0
+S3150800453C0C03042B46D0B24B5B6803F00C03082B18
+S3150800454C3BD06368B3F5803F00F08E80002B40F0BB
+S3150800455C918003F1804303F504331A6822F4803200
+S3150800456C1A601A6822F480221A60A54AD36A23F0C4
+S3150800457C0F03A1680B43D3626368002B00F0948089
+S3150800458CFFF780FE05464FF4003393FAA3F39C4BD2
+S3150800459C19684FF4003393FAA3F3B3FA83F303F0D1
+S315080045AC1F03012202FA03F3194222D1FFF76AFE0E
+S315080045BC401B6428E7D90320ABE2914B5B6813F4E4
+S315080045CC803FBED04FF4003393FAA3F38C4B196893
+S315080045DC4FF4003393FAA3F3B3FA83F303F01F03F0
+S315080045EC012202FA03F3194203D06368002B00F088
+S315080045FC8982236813F0020F00F09C80804B5B685D
+S3150800460C13F00C0F72D07E4B5B6803F00C03082B6F
+S3150800461C67D02369002B00F0CB80012292FAA2F313
+S3150800462CB3FA83F303F1845303F584139B001A60DE
+S3150800463CFFF728FE0546022393FAA3F3704B196875
+S3150800464C022393FAA3F3B3FA83F303F01F030122AD
+S3150800465C02FA03F3194240F09C80FFF713FE401B45
+S3150800466C0228E8D9032054E2654A136843F48033D8
+S3150800467C13607AE7B3F5A02F09D0614B1A6822F4B8
+S3150800468C80321A601A6822F480221A606DE703F1E8
+S3150800469C8043A3F53C331A6842F480221A601A68E0
+S315080046AC42F480321A6060E7FFF7ECFD05464FF4DA
+S315080046BC003393FAA3F3524B19684FF4003393FA69
+S315080046CCA3F3B3FA83F303F01F03012202FA03F3ED
+S315080046DC19428ED0FFF7D6FD401B6428E7D9032074
+S315080046EC17E2474B5B6813F4803F92D1022393FA87
+S315080046FCA3F3434B1968022393FAA3F3B3FA83F390
+S3150800470C03F01F03012202FA03F3194204D02369AA
+S3150800471C934201D00120FCE13948036823F0F803E1
+S3150800472C6169F82292FAA2F2B2FA82F201FA02F25C
+S3150800473C13430360236813F0080F00F08D80A369F8
+S3150800474C002B61D0012191FAA1F2B2FA82F22D4B1B
+S3150800475C13449B001960FFF795FD0546022393FA4F
+S3150800476CA3F293FAA3F293FAA3F2254A516A93FA9F
+S3150800477CA3F3B3FA83F303F01F03012202FA03F33C
+S3150800478C194269D1FFF77EFD401B0228E6D90320A2
+S3150800479CBFE11B48036823F0F8036169F82292FA13
+S315080047ACA2F2B2FA82F201FA02F213430360C1E7EB
+S315080047BC012393FAA3F3B3FA83F303F1845303F5B2
+S315080047CC84139B0000221A60FFF75CFD0546022342
+S315080047DC93FAA3F30A4B1968022393FAA3F3B3FAD1
+S315080047EC83F303F01F03012202FA03F31942A1D043
+S315080047FCFFF748FD401B0228E9D9032089E100BFD1
+S3150800480C0010024020819010012292FAA2F2B2FA0C
+S3150800481C82F2C14B13449B0000221A60FFF732FD4B
+S3150800482C0546022393FAA3F293FAA3F293FAA3F298
+S3150800483CBA4A516A93FAA3F3B3FA83F303F01F0344
+S3150800484C012202FA03F3194206D0FFF71BFD401B9F
+S3150800485C0228E6D903205CE1236813F0040F00F064
+S3150800486CB380AE4BDB6913F0805F26D1AB4BDA69AC
+S3150800487C42F08052DA61DB6903F080530193019BA5
+S3150800488C0125A74B1B6813F4807F18D0E368012B0E
+S3150800489C29D073BB03F1804303F504331A6A22F05B
+S315080048AC01021A621A6A22F004021A62E368002BE1
+S315080048BC5DD0FFF7E7FC064647E00025E1E7984A96
+S315080048CC136843F480731360FFF7DCFC0646944BBD
+S315080048DC1B6813F4807FD9D1FFF7D4FC801B64289E
+S315080048ECF5D9032015E18D4A136A43F001031362C7
+S315080048FCDCE7052B09D0894B1A6A22F001021A62E9
+S3150800490C1A6A22F004021A62D0E7844B1A6A42F039
+S3150800491C04021A621A6A42F001021A62C6E77F4B4F
+S3150800492C196A022393FAA3F3B3FA83F303F01F036A
+S3150800493C012202FA03F3194245D1FFF7A3FC801BA7
+S3150800494C41F28833984200F2DF80022393FAA3F2ED
+S3150800495C93FAA3F3B3FA83F35B0943F00203022B2E
+S3150800496CDDD0022393FAA3F36C4B596AD9E7FFF708
+S3150800497C89FC064615E0694B196A022393FAA3F3D8
+S3150800498CB3FA83F303F01F03012202FA03F3194265
+S3150800499C19D0FFF777FC801B41F28833984200F256
+S315080049ACB580022393FAA3F293FAA3F3B3FA83F32B
+S315080049BC5B0943F00203022BDDD0022393FAA3F31F
+S315080049CC564B596AD9E7B5BBE369002B00F0A080B2
+S315080049DC524A526802F00C02082A00F0A380022BF5
+S315080049EC2FD04FF0807393FAA3F3B3FA83F303F142
+S315080049FC845303F584139B0000221A60FFF742FCCC
+S31508004A0C04464FF0007393FAA3F3444B19684FF01E
+S31508004A1C007393FAA3F3B3FA83F303F01F0301228B
+S31508004A2C02FA03F319426BD0FFF72CFC001B022881
+S31508004A3CE7D903206DE0394AD36923F08053D36153
+S31508004A4CC2E74FF0807393FAA3F3B3FA83F303F137
+S31508004A5C845303F584139B0000221A60FFF712FC9B
+S31508004A6C05464FF0007393FAA3F32C4B19684FF0D5
+S31508004A7C007393FAA3F3B3FA83F303F01F0301222B
+S31508004A8C02FA03F3194206D0FFF7FCFB401B022877
+S31508004A9CE7D903203DE021494B6823F47413626A75
+S31508004AAC206A024313434B604FF0807393FAA3F3C7
+S31508004ABCB3FA83F303F1845303F584139B000122A1
+S31508004ACC1A60FFF7DFFB04464FF0007393FAA3F363
+S31508004ADC124B19684FF0007393FAA3F3B3FA83F3E6
+S31508004AEC03F01F03012202FA03F3194206D1FFF75A
+S31508004AFCC9FB001B0228E7D903200AE0002008E0BE
+S31508004B0C002006E0012004E0032002E0032000E078
+S31508004B1C002002B070BD00BF20819010001002402A
+S31508004B2C007000400120F4E7164B5B6803F00C029A
+S31508004B3C082A24D103F470114FF4701292FAA2F2D7
+S31508004B4CB2FA82F221FA02F20F49885C0D4AD26A4D
+S31508004B5C02F00F020F2191FAA1F1B1FA81F1CA40C4
+S31508004B6C0A498A5C13F4803F03D1094B03FB00F016
+S31508004B7C7047084BB3FBF2F303FB00F0704705488C
+S31508004B8C704700BF001002404850000858500008F3
+S31508004B9C00093D0000127A00704B1B6803F00703EE
+S31508004BAC8B420CD26D4A136823F007030B43136030
+S31508004BBC136803F00703994201D00120704770B5BA
+S31508004BCC036813F0020F06D0654A536823F0F00306
+S31508004BDC8468234353600D460446036813F0010F9B
+S31508004BEC7AD04368012B2FD0022B42D0022292FA9C
+S31508004BFCA2F25B4A1068022292FAA2F2B2FA82F286
+S31508004C0C02F01F02012101FA02F2104200F0A48000
+S31508004C1C53494A6822F0030213434B60FFF732FBF1
+S31508004C2C06466368012B39D0022B46D04C4B5B6881
+S31508004C3C13F00C0F50D0FFF725FB801B41F288337D
+S31508004C4C9842F3D9032070BD4FF4003292FAA2F2BF
+S31508004C5C434A10684FF4003292FAA2F2B2FA82F280
+S31508004C6C02F01F02012101FA02F21042D0D10120F2
+S31508004C7C70BD4FF0007292FAA2F2394A10684FF0E2
+S31508004C8C007292FAA2F2B2FA82F202F01F02012123
+S31508004C9C01FA02F21042BBD1012070BD304B5B68A1
+S31508004CAC03F00C03042B17D0FFF7ECFA801B41F228
+S31508004CBC88339842F2D9032070BD294B5B6803F000
+S31508004CCC0C03082B08D0FFF7DDFA801B41F288335A
+S31508004CDC9842F2D9032070BD204B1B6803F00703DA
+S31508004CEC9D420CD21D4A136823F007032B4313600D
+S31508004CFC136803F007039D4201D0012070BD236899
+S31508004D0C13F0040F06D0164A536823F4E063E168DF
+S31508004D1C0B435360236813F0080F07D0104A5368E7
+S31508004D2C23F46053216943EAC1035360FFF7FCFE81
+S31508004D3C0B4B5B6803F0F003F02292FAA2F2B2FA7C
+S31508004D4C82F2D340074AD35CD840074B1860002040
+S31508004D5CFFF768FA002070BD012070BD00200240E4
+S31508004D6C001002406850000800000020014B18682B
+S31508004D7C704700BF000000201549D1F8883043F46D
+S31508004D8C7003C1F88830134B1A6842F001021A6096
+S31508004D9C5868114A02405A601A6822F0847222F442
+S31508004DAC80321A601A6822F480221A605A6822F431
+S31508004DBCFE025A60DA6A22F00F02DA62186B074AA8
+S31508004DCC02401A6300229A60054B8B60704700BF3D
+S31508004DDC00ED00E0001002400CC07FF8CCFC00FF90
+S31508004DEC0040000800B591B0012306934FF4A022A9
+S31508004DFC0792002208920A9302230D934FF48033EC
+S31508004E0C0E934FF4E0130F9306A8FFF787FB00B138
+S31508004E1CFEE70F23019302210291002303934FF41B
+S31508004E2C80620492059301A8FFF7B6FE00B1FEE76F
+S31508004E3C11B05DF804FB08B5FFF70AFAFFF7D2FFC5
+S31508004E4C00F0ACF8FFF7BCF908BD08B5FFF7F3FF9F
+S31508004E5CFFF7C0F9FCE7000070B58AB0384B9A69C1
+S31508004E6C42F001029A619A6902F001020192019AD2
+S31508004E7C5A6942F480025A615A6902F48002029213
+S31508004E8C029A5A6942F400125A615A6902F40012DB
+S31508004E9C0392039A5A6942F400325A615B6903F425
+S31508004EAC00330493049B0320FFF7F2F90022114602
+S31508004EBC6FF00B00FFF7FEF9002211466FF00A009F
+S31508004ECCFFF7F8F9002211466FF00900FFF7F2F91F
+S31508004EDC002211466FF00400FFF7ECF90022114688
+S31508004EEC6FF00300FFF7E6F9002211466FF0010098
+S31508004EFCFFF7E0F9002211464FF0FF30FFF7DAF919
+S31508004F0C4FF480560596012506950024079403232D
+S31508004F1C089305A94FF09040FFF72AFA2246314626
+S31508004F2C4FF09040FFF7F4FA4FF48073059306950B
+S31508004F3C0794089405A90348FFF71AFA0AB070BD36
+S31508004F4C0010024000100048DFF834D0002103E0BE
+S31508004F5C0C4B5B58435004310B480C4B42189A4285
+S31508004F6CF6D30B4A02E0002342F8043B094B9A425B
+S31508004F7CF9D3FFF701FF00F031F8FFF766FFFEE7FC
+S31508004F8C00A000208050000800000020040000202B
+S31508004F9C040000202C000020FEE7000008B5FFF7EF
+S31508004FACE5FE084BA3FB00308009FFF7B5F9042092
+S31508004FBCFFF7C8F9002211464FF0FF30FFF77AF9D0
+S31508004FCC08BD00BFD34D621008B5FFF75BF908BDE5
+S31508004FDC08B5FFF74FF9FFF7C6F908BD70B50D4EC2
+S31508004FEC0D4CA41BA4100025A54209D10B4E0C4C44
+S31508004FFC00F018F8A41BA4100025A54205D170BD15
+S3150800500C56F8253098470135EEE756F82530984777
+S3150800501C0135F2E7785000087850000878500008F7
+S3150800502C7C500008F8B500BFF8BC08BC9E46704713
+S3110800503CF8B500BFF8BC08BC9E467047DB
+S3150800504802030405060708090A0B0C0D0E0F1010B3
+S315080050580102030405060708090A0B0C0D0E0F10B2
+S315080050680000000000000000010203040607080902
+S30908005078B14100082C
+S3090800507C8D4100084C
+S3090800508000127A0092
+S70508004F554E
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/demoprog_stm32f303.elf.launch b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/demoprog_stm32f303.elf.launch
new file mode 100644
index 00000000..6194016c
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/demoprog_stm32f303.elf.launch
@@ -0,0 +1,40 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/header.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/header.h
new file mode 100644
index 00000000..3370800f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/header.h
@@ -0,0 +1,40 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Prog\header.h
+* \brief Generic header file.
+* \ingroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef HEADER_H
+#define HEADER_H
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "stm32f3xx.h" /* STM32 CPU and HAL header */
+#include "led.h" /* LED driver */
+#include "timer.h" /* Timer driver */
+
+
+#endif /* HEADER_H */
+/*********************************** end of header.h ***********************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/led.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/led.c
new file mode 100644
index 00000000..113e323c
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/led.c
@@ -0,0 +1,94 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Prog\led.c
+* \brief LED driver source file.
+* \ingroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Toggle interval time in milliseconds. */
+#define LED_TOGGLE_MS (500)
+
+
+/************************************************************************************//**
+** \brief Initializes the LED.
+** \return none.
+**
+****************************************************************************************/
+void LedInit(void)
+{
+ /* Note that the initialization of the LED GPIO pin is done in HAL_MspInit(). All that
+ * is left to do here is to make sure the LED is turned off after initialization.
+ */
+ HAL_GPIO_WritePin(GPIOE, GPIO_PIN_8, GPIO_PIN_RESET);
+} /*** end of LedInit ***/
+
+
+/************************************************************************************//**
+** \brief Toggles the LED at a fixed time interval.
+** \return none.
+**
+****************************************************************************************/
+void LedToggle(void)
+{
+ static unsigned char led_toggle_state = 0;
+ static unsigned long timer_counter_last = 0;
+ unsigned long timer_counter_now;
+
+ /* check if toggle interval time passed */
+ timer_counter_now = TimerGet();
+ if ( (timer_counter_now - timer_counter_last) < LED_TOGGLE_MS)
+ {
+ /* not yet time to toggle */
+ return;
+ }
+
+ /* determine toggle action */
+ if (led_toggle_state == 0)
+ {
+ led_toggle_state = 1;
+ /* turn the LED on */
+ HAL_GPIO_WritePin(GPIOE, GPIO_PIN_8, GPIO_PIN_SET);
+ }
+ else
+ {
+ led_toggle_state = 0;
+ /* turn the LED off */
+ HAL_GPIO_WritePin(GPIOE, GPIO_PIN_8, GPIO_PIN_RESET);
+ }
+
+ /* store toggle time to determine next toggle interval */
+ timer_counter_last = timer_counter_now;
+} /*** end of LedToggle ***/
+
+
+/*********************************** end of led.c **************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/led.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/led.h
new file mode 100644
index 00000000..5af489b7
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/led.h
@@ -0,0 +1,39 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Prog\led.h
+* \brief LED driver header file.
+* \ingroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef LED_H
+#define LED_H
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void LedInit(void);
+void LedToggle(void);
+
+
+#endif /* LED_H */
+/*********************************** end of led.h **************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Device/ST/STM32F3xx/Include/stm32f303xc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Device/ST/STM32F3xx/Include/stm32f303xc.h
new file mode 100644
index 00000000..ec70ffd2
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Device/ST/STM32F3xx/Include/stm32f303xc.h
@@ -0,0 +1,13397 @@
+/**
+ ******************************************************************************
+ * @file stm32f303xc.h
+ * @author MCD Application Team
+ * @brief CMSIS STM32F303xC Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f303xc
+ * @{
+ */
+
+#ifndef __STM32F303xC_H
+#define __STM32F303xC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F303xC devices provide an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F303xC devices use 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1U /*!< STM32F303xC devices provide an FPU */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F303xC devices Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M4 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line 19 */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line 20 */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_TSC_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Controller Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */
+ ADC1_2_IRQn = 18, /*!< ADC1 & ADC2 Interrupts */
+ USB_HP_CAN_TX_IRQn = 19, /*!< USB Device High Priority or CAN TX Interrupts */
+ USB_LP_CAN_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN RX0 Interrupts */
+ CAN_RX1_IRQn = 21, /*!< CAN RX1 Interrupt */
+ CAN_SCE_IRQn = 22, /*!< CAN SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt & EXTI Line24 Interrupt (I2C2 wakeup) */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt & EXTI Line28 Interrupt (USART3 wakeup) */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line 17 Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Wakeup Interrupt */
+ TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */
+ TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */
+ TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt & EXTI Line34 Interrupt (UART4 wakeup) */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt & EXTI Line35 Interrupt (UART5 wakeup) */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC underrun error Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ ADC4_IRQn = 61, /*!< ADC4 global Interrupt */
+ COMP1_2_3_IRQn = 64, /*!< COMP1, COMP2 and COMP3 global Interrupt via EXTI Line21, 22 and 29*/
+ COMP4_5_6_IRQn = 65, /*!< COMP4, COMP5 and COMP6 global Interrupt via EXTI Line30, 31 and 32*/
+ COMP7_IRQn = 66, /*!< COMP7 global Interrupt via EXTI Line33 */
+ USB_HP_IRQn = 74, /*!< USB High Priority global Interrupt */
+ USB_LP_IRQn = 75, /*!< USB Low Priority global Interrupt */
+ USBWakeUp_RMP_IRQn = 76, /*!< USB Wakeup Interrupt remap */
+ FPU_IRQn = 81, /*!< Floating point Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f3xx.h" /* STM32F3xx System Header */
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */
+ uint32_t RESERVED0; /*!< Reserved, 0x010 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x01C */
+ __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x02C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x044 */
+ uint32_t RESERVED4; /*!< Reserved, 0x048 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */
+ uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1/3 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief Analog Comparators
+ */
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */
+} COMP_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx
+ * @{
+ */
+
+#ifndef __STM32F3xx_H
+#define __STM32F3xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F3)
+#define STM32F3
+#endif /* STM32F3 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \
+ !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \
+ !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \
+ !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \
+ !defined (STM32F373xC) && !defined (STM32F378xx)
+
+ /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
+ STM32F301R6 and STM32F301R8 Devices */
+ /* #define STM32F302x8 */ /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
+ STM32F302R6 and STM32F302R8 Devices */
+ /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC,
+ STM32F302VB and STM32F302VC Devices */
+ /* #define STM32F302xE */ /*!< STM32F302RE, STM32F302VE, STM32F302ZE, STM32F302RD,
+ STM32F302VD and STM32F302ZD Devices */
+ /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8,
+ STM32F303R6 and STM32F303R8 Devices */
+ /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC,
+ STM32F303VB and STM32F303VC Devices */
+ /* #define STM32F303xE */ /*!< STM32F303RE, STM32F303VE, STM32F303ZE, STM32F303RD,
+ STM32F303VD and STM32F303ZD Devices */
+ /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC,
+ STM32F373R8, STM32F373RB, STM32F373RC,
+ STM32F373V8, STM32F373VB and STM32F373VC Devices */
+ /* #define STM32F334x8 */ /*!< STM32F334K4, STM32F334K6, STM32F334K8,
+ STM32F334C4, STM32F334C6, STM32F334C8,
+ STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
+ /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
+ /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
+ /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
+ /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
+ /* #define STM32F398xx */ /*!< STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.3.2
+ */
+#define __STM32F3_CMSIS_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F3_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F3_CMSIS_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
+#define __STM32F3_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F3_CMSIS_VERSION ((__STM32F3_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F3_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F3_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F3_CMSIS_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F301x8)
+ #include "stm32f301x8.h"
+#elif defined(STM32F302x8)
+ #include "stm32f302x8.h"
+#elif defined(STM32F302xC)
+ #include "stm32f302xc.h"
+#elif defined(STM32F302xE)
+ #include "stm32f302xe.h"
+#elif defined(STM32F303x8)
+ #include "stm32f303x8.h"
+#elif defined(STM32F303xC)
+ #include "stm32f303xc.h"
+#elif defined(STM32F303xE)
+ #include "stm32f303xe.h"
+#elif defined(STM32F373xC)
+ #include "stm32f373xc.h"
+#elif defined(STM32F334x8)
+ #include "stm32f334x8.h"
+#elif defined(STM32F318xx)
+ #include "stm32f318xx.h"
+#elif defined(STM32F328xx)
+ #include "stm32f328xx.h"
+#elif defined(STM32F358xx)
+ #include "stm32f358xx.h"
+#elif defined(STM32F378xx)
+ #include "stm32f378xx.h"
+#elif defined(STM32F398xx)
+ #include "stm32f398xx.h"
+#else
+ #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f3xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F3xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Device/ST/STM32F3xx/Include/system_stm32f3xx.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Device/ST/STM32F3xx/Include/system_stm32f3xx.h
new file mode 100644
index 00000000..3670bcff
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Device/ST/STM32F3xx/Include/system_stm32f3xx.h
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F3xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F3XX_H
+#define __SYSTEM_STM32F3XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F3xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F3xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F3XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_common_tables.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_common_tables.h
new file mode 100644
index 00000000..d5d72417
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_common_tables.h
@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. October 2015
+* $Revision: V.1.4.5 a
+*
+* Project: CMSIS DSP Library
+* Title: arm_common_tables.h
+*
+* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+/* extern const q31_t realCoefAQ31[1024]; */
+/* extern const q31_t realCoefBQ31[1024]; */
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /* ARM_COMMON_TABLES_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_const_structs.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_const_structs.h
new file mode 100644
index 00000000..54595f55
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_const_structs.h
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date: 19. March 2015
+* $Revision: V.1.4.5
+*
+* Project: CMSIS DSP Library
+* Title: arm_const_structs.h
+*
+* Description: This file has constant structs that are initialized for
+* user convenience. For example, some can be given as
+* arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+ extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+ extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+ extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_math.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_math.h
new file mode 100644
index 00000000..580cbbde
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/arm_math.h
@@ -0,0 +1,7154 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date: 20. October 2015
+* $Revision: V1.4.5 b
+*
+* Project: CMSIS DSP Library
+* Title: arm_math.h
+*
+* Description: Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of ARM LIMITED nor the names of its contributors
+* may be used to endorse or promote products derived from this
+* software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * Introduction
+ * ------------
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of functions each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * Using the Library
+ * ------------
+ *
+ * The library installer contains prebuilt versions of the libraries in the Lib
folder.
+ * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+ * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+ * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+ *
+ * The library functions are declared in the public file arm_math.h
which is placed in the Include
folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file arm_math.h
for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+ *
+ * Examples
+ * --------
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * Toolchain Support
+ * ------------
+ *
+ * The library has been developed and tested with MDK-ARM version 5.14.0.0
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * Building the Library
+ * ------------
+ *
+ * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the CMSIS\\DSP_Lib\\Source\\ARM
folder.
+ * - arm_cortexM_math.uvprojx
+ *
+ *
+ * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+ *
+ * Pre-processor Macros
+ * ------------
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * - UNALIGNED_SUPPORT_DISABLE:
+ *
+ * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+ *
+ * - ARM_MATH_BIG_ENDIAN:
+ *
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * - ARM_MATH_MATRIX_CHECK:
+ *
+ * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+ *
+ * - ARM_MATH_ROUNDING:
+ *
+ * Define macro ARM_MATH_ROUNDING for rounding on support functions
+ *
+ * - ARM_MATH_CMx:
+ *
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+ * ARM_MATH_CM7 for building the library on cortex-M7.
+ *
+ * - __FPU_PRESENT:
+ *
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ *
+ * CMSIS-DSP in ARM::CMSIS Pack
+ * -----------------------------
+ *
+ * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories:
+ * |File/Folder |Content |
+ * |------------------------------|------------------------------------------------------------------------|
+ * |\b CMSIS\\Documentation\\DSP | This documentation |
+ * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
+ * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
+ * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
+ *
+ *
+ * Revision History of CMSIS-DSP
+ * ------------
+ * Please refer to \ref ChangeLog_pg.
+ *
+ * Copyright Notice
+ * ------------
+ *
+ * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ *
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size numRows X numCols
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ *
+ * pData[i*numCols + j]
+ *
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function arm_mat_init_f32()
, arm_mat_init_q31()
+ * and arm_mat_init_q15()
for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ *
+ * arm_matrix_instance_f32 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q31 S = {nRows, nColumns, pData};
+ * arm_matrix_instance_q15 S = {nRows, nColumns, pData};
+ *
+ * where nRows
specifies the number of rows, nColumns
+ * specifies the number of columns, and pData
points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ *
+ * ARM_MATH_SIZE_MISMATCH
+ *
+ * Otherwise the functions return
+ *
+ * ARM_MATH_SUCCESS
+ *
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ *
+ * ARM_MATH_MATRIX_CHECK
+ *
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return ARM_MATH_SUCCESS
.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+ #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+ #define ARM_MATH_CM0_FAMILY
+#elif defined (ARM_MATH_CM0PLUS)
+ #include "core_cm0plus.h"
+ #define ARM_MATH_CM0_FAMILY
+#else
+ #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#ifndef PI
+#define PI 3.14159265358979f
+#endif
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define FAST_MATH_TABLE_SIZE 512
+#define FAST_MATH_Q31_SHIFT (32 - 10)
+#define FAST_MATH_Q15_SHIFT (16 - 10)
+#define CONTROLLER_Q31_SHIFT (32 - 9)
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x400000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+ /**
+ * @brief Macro for Unaligned Support
+ */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+ #define ALIGN4
+#else
+ #if defined (__GNUC__)
+ #define ALIGN4 __attribute__((aligned(4)))
+ #else
+ #define ALIGN4 __align(4)
+ #endif
+#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#if defined __CC_ARM
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __GNUC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED __attribute__((unused))
+
+#elif defined __ICCARM__
+ #define __SIMD32_TYPE int32_t __packed
+ #define CMSIS_UNUSED
+
+#elif defined __CSMC__
+ #define __SIMD32_TYPE int32_t
+ #define CMSIS_UNUSED
+
+#elif defined __TASKING__
+ #define __SIMD32_TYPE __unaligned int32_t
+ #define CMSIS_UNUSED
+
+#else
+ #error Unknown compiler
+#endif
+
+#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
+#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
+#define __SIMD64(addr) (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
+ (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+/*
+ #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
+ #define __CLZ __clz
+ #endif
+ */
+/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
+ static __INLINE uint32_t __CLZ(
+ q31_t data);
+
+ static __INLINE uint32_t __CLZ(
+ q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return (count);
+ }
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+ q31_t out;
+ uint32_t tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t) (__CLZ( in) - 1));
+ }
+ else
+ {
+ signBits = ((uint32_t) (__CLZ(-in) - 1));
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 24);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q63_t) in * out) >> 31);
+ tempVal = 0x7FFFFFFFu - tempVal;
+ /* 1.31 with exp 1 */
+ /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */
+ out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+ }
+
+
+ /**
+ * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+ q15_t out = 0;
+ uint32_t tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = ((uint32_t)(__CLZ( in) - 17));
+ }
+ else
+ {
+ signBits = ((uint32_t)(__CLZ(-in) - 17));
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = (in << signBits);
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t)(in >> 8);
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (uint32_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFFu - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0_FAMILY)
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+ }
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB8(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s, t, u;
+
+ r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
+ s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
+ t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
+ u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
+
+ return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */
+ q31_t r = 0, s = 0;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHADD16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSUB16(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHASX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __QSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
+ s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SHSAX(
+ uint32_t x,
+ uint32_t y)
+ {
+ q31_t r, s;
+
+ r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+ s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
+
+ return ((uint32_t)((s << 16) | (r )));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSDX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUADX(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE int32_t __QADD(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE int32_t __QSUB(
+ int32_t x,
+ int32_t y)
+ {
+ return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y)));
+ }
+
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLAD(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLADX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMLSDX(
+ uint32_t x,
+ uint32_t y,
+ uint32_t sum)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q31_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALD(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE uint64_t __SMLALDX(
+ uint32_t x,
+ uint32_t y,
+ uint64_t sum)
+ {
+/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */
+ return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ( ((q63_t)sum ) ) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUAD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SMUSD(
+ uint32_t x,
+ uint32_t y)
+ {
+ return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) -
+ ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
+ }
+
+
+ /*
+ * @brief C custom defined SXTB16 for M3 and M0 processors
+ */
+ static __INLINE uint32_t __SXTB16(
+ uint32_t x)
+ {
+ return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) |
+ ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) ));
+ }
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] S points to an instance of the Q7 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] S points to an instance of the Q15 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * numTaps
is not a supported value.
+ */
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] S points to an instance of the Q31 FIR filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] S points to an instance of the floating-point FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q15;
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_casd_df1_inst_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float64_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f64;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_q31;
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Q31, complex, matrix multiplication.
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_cmplx_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] pSrc points to the input matrix
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either ARM_MATH_SIZE_MISMATCH
+ * or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @param[in] pState points to the array for storing intermediate results
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] pSrcA points to the first input matrix structure
+ * @param[in] pSrcB points to the second input matrix structure
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] pDst points to the output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to output matrix structure
+ * @return The function returns either
+ * ARM_MATH_SIZE_MISMATCH
or ARM_MATH_SUCCESS
based on the outcome of size checking.
+ */
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t * pData);
+
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t * pData);
+
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] pData points to the matrix data array.
+ */
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t * pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+ q15_t A1;
+ q15_t A2;
+#else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the q15 PID Control structure
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues; /**< nValues */
+ float32_t x1; /**< x1 */
+ float32_t xSpacing; /**< xSpacing */
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q15(
+ arm_cfft_radix2_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q15(
+ const arm_cfft_radix2_instance_q15 * S,
+ q15_t * pSrc);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_q31(
+ arm_cfft_radix2_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_q31(
+ const arm_cfft_radix2_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix2_init_f32(
+ arm_cfft_radix2_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix2_f32(
+ const arm_cfft_radix2_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+/* Deprecated */
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q15;
+
+void arm_cfft_q15(
+ const arm_cfft_instance_q15 * S,
+ q15_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_q31;
+
+void arm_cfft_q31(
+ const arm_cfft_instance_q31 * S,
+ q31_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
+ const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t bitRevLength; /**< bit reversal table length. */
+ } arm_cfft_instance_f32;
+
+ void arm_cfft_f32(
+ const arm_cfft_instance_f32 * S,
+ float32_t * p1,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+typedef struct
+ {
+ arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
+ uint16_t fftLenRFFT; /**< length of the real sequence */
+ float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
+ } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+ arm_rfft_fast_instance_f32 * S,
+ uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+ arm_rfft_fast_instance_f32 * S,
+ float32_t * p, float32_t * pOut,
+ uint8_t ifftFlag);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if fftLenReal
is not a supported transform length.
+ */
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N
is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q31 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if N
is not a supported transform length.
+ */
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] S points to an instance of the Q15 DCT4 structure.
+ * @param[in] pState points to state buffer.
+ * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
+ */
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] pSrc points to the input buffer
+ * @param[out] pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ */
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] result output result returned here
+ */
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ */
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ */
+ void arm_conv_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_conv_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
+ */
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q7 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+/**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize
is not a multiple of M
.
+ */
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize
is not a multiple of M
.
+ */
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * blockSize
is not a multiple of M
.
+ */
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps
is not a multiple of the interpolation factor L
.
+ */
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps
is not a multiple of the interpolation factor L
.
+ */
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] pCoeffs points to the filter coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length numTaps
is not a multiple of the interpolation factor L
.
+ */
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ */
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f64;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_stereo_df2T_f32(
+ const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] S points to an instance of the filter data structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_biquad_cascade_df2T_f64(
+ const arm_biquad_cascade_df2T_instance_f64 * S,
+ float64_t * pSrc,
+ float64_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_stereo_df2T_init_f32(
+ arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] pCoeffs points to the filter coefficients.
+ * @param[in] pState points to the state buffer.
+ */
+ void arm_biquad_cascade_df2T_init_f64(
+ arm_biquad_cascade_df2T_instance_f64 * S,
+ uint8_t numStages,
+ float64_t * pCoeffs,
+ float64_t * pState);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] pState points to the state buffer. The array is of length numStages.
+ */
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pkCoeffs,
+ float32_t * pvCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pkCoeffs,
+ q31_t * pvCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ */
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pkCoeffs,
+ q15_t * pvCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to the coefficient buffer.
+ * @param[in] pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q15 LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[in] pRef points to the block of reference data.
+ * @param[out] pOut points to the block of output data.
+ * @param[out] pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ */
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] pCoeffs points to coefficient buffer.
+ * @param[in] pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ */
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ */
+ void arm_correlate_fast_opt_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ q15_t * pScratch);
+
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+ * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+ */
+ void arm_correlate_opt_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ q15_t * pScratch1,
+ q15_t * pScratch2);
+
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ */
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] pSrc points to the block of input data.
+ * @param[out] pDst points to the block of output data
+ * @param[in] pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ */
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] pCoeffs points to the array of filter coefficients.
+ * @param[in] pState points to the state buffer.
+ * @param[in] pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ */
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cos output.
+ */
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t * pSinVal,
+ float32_t * pCosVal);
+
+
+ /**
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] pSinVal points to the processed sine output.
+ * @param[out] pCosVal points to the processed cosine output.
+ */
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t * pSinVal,
+ q31_t * pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] pSrc points to the input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * S
points to an instance of the PID control data structure. in
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ *
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+ __SIMD32_TYPE *vstate;
+
+ /* Implementation of PID controller */
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in);
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ vstate = __SIMD32_CONST(S->state);
+ acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc);
+#else
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0) * in;
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0];
+ acc += (q31_t) S->A2 * S->state[1];
+#endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] src points to the instance of the input floating-point matrix structure.
+ * @param[out] dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+ arm_status arm_mat_inverse_f64(
+ const arm_matrix_instance_f64 * src,
+ arm_matrix_instance_f64 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents Ia, Ib and Ic
to calculate currents
+ * in the two-phase orthogonal stator axis Ialpha
and Ibeta
.
+ * When Ialpha
is superposed with Ia
as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and Ia + Ib + Ic = 0
, in this condition Ialpha
and Ibeta
+ * can be calculated using only Ia
and Ib
.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where Ia
and Ib
are the instantaneous stator phases and
+ * pIalpha
and pIbeta
are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ */
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+ }
+
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate a
+ * @param[in] Ib input three-phase coordinate b
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where pIa
and pIb
are the instantaneous stator phases and
+ * Ialpha
and Ibeta
are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ */
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta;
+ }
+
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] pIa points to output three-phase coordinate a
+ * @param[out] pIb points to output three-phase coordinate b
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] pSrc input pointer
+ * @param[out] pDst output pointer
+ * @param[in] blockSize number of samples to process
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the Ialpha
and the Ibeta
currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where Ialpha
and Ibeta
are the stator vector components,
+ * pId
and pIq
are rotor vector components and cosVal
and sinVal
are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+ }
+
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] pId points to output rotor reference frame d
+ * @param[out] pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where pIalpha
and pIbeta
are the stator vector components,
+ * Id
and Iq
are rotor vector components and cosVal
and sinVal
are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ */
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ *
+ * Scaling and Overflow Behavior:
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ *
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ *
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * S
points to an instance of the Linear Interpolate function data structure.
+ * x
is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (int32_t) ((x - S->x1) / xSpacing);
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if((uint32_t)i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues - 1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i + 1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x
is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q31_t arm_linear_interp_q31(
+ q31_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (q31_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x
is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+ static __INLINE q15_t arm_linear_interp_q15(
+ q15_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & (int32_t)0xFFF00000) >> 20);
+
+ if(index >= (int32_t)(nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return (pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (q15_t) (y >> 20);
+ }
+ }
+
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample x
is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+ static __INLINE q7_t arm_linear_interp_q7(
+ q7_t * pYData,
+ q31_t x,
+ uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ uint32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ if (x < 0)
+ {
+ return (pYData[0]);
+ }
+ index = (x >> 20) & 0xfff;
+
+ if(index >= (nValues - 1))
+ {
+ return (pYData[nValues - 1]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (q7_t) (y >> 20);
+ }
+ }
+
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+ float32_t arm_sin_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q31_t arm_sin_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+ q15_t arm_sin_q15(
+ q15_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+ float32_t arm_cos_f32(
+ float32_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q31_t arm_cos_q31(
+ q31_t x);
+
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ *
+ * x1 = x0 - f(x0)/f'(x0)
+ *
+ * where x1
is the current estimate,
+ * x0
is the previous estimate, and
+ * f'(x0)
is the derivative of f()
evaluated at x0
.
+ * For the square root function, the algorithm reduces to:
+ *
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ *
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in
is negative value and returns zero output for negative values.
+ */
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in,
+ float32_t * pOut)
+ {
+ if(in >= 0.0f)
+ {
+
+#if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined(__GNUC__)
+ *pOut = __builtin_sqrtf(in);
+#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000)
+ __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in));
+#else
+ *pOut = sqrtf(in);
+#endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in
is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in,
+ q31_t * pOut);
+
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * in
is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in,
+ q15_t * pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = (uint16_t)wOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output value.
+ */
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] pSrc points to the complex input vector
+ * @param[out] pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ */
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] realResult real part of the result returned here
+ * @param[out] imagResult imaginary part of the result returned here
+ */
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] pSrcCmplx points to the complex input vector
+ * @param[in] pSrcReal points to the real input vector
+ * @param[out] pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ */
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[in] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] pResult is output pointer
+ * @param[out] pIndex is the array index of the minimum value in the input buffer.
+ */
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] pResult maximum value returned here
+ * @param[out] pIndex index of maximum value returned here
+ */
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] pSrcA points to the first input vector
+ * @param[in] pSrcB points to the second input vector
+ * @param[out] pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ */
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] pSrc points to the floating-point input vector
+ * @param[out] pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] pSrc is input pointer
+ * @param[out] pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function f(x, y)
is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * Algorithm
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ *
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ *
+ *
+ * \par
+ * where numRows
specifies the number of rows in the table;
+ * numCols
specifies the number of columns in the table;
+ * and pData
points to an array of size numRows*numCols
values.
+ * The data table pTable
is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at pTable[x + y*numCols]
where x and y are integers.
+ *
+ * \par
+ * Let (x, y)
specify the desired interpolation point. Then define:
+ *
+ * XF = floor(x)
+ * YF = floor(y)
+ *
+ * \par
+ * The interpolated output point is computed as:
+ *
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ *
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+ }
+
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + (int32_t)nCols * (cI) ];
+ x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ];
+ y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return ((q31_t)(acc << 2));
+ }
+
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return ((q15_t)(acc >> 36));
+ }
+
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & (q31_t)0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & (q31_t)0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+ {
+ return (0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
+ x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & (q31_t)0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
+ y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return ((q7_t)(acc >> 40));
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+/* SMMLAR */
+#define multAcc_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMLSR */
+#define multSub_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+/* SMMULR */
+#define mult_32x32_keep32_R(a, x, y) \
+ a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+/* SMMLA */
+#define multAcc_32x32_keep32(a, x, y) \
+ a += (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMLS */
+#define multSub_32x32_keep32(a, x, y) \
+ a -= (q31_t) (((q63_t) x * y) >> 32)
+
+/* SMMUL */
+#define mult_32x32_keep32(a, x, y) \
+ a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM )
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("push") \
+ _Pragma ("O1")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_EXIT \
+ _Pragma ("pop")
+ #else
+ #define LOW_OPTIMIZATION_EXIT
+ #endif
+
+ /* Enter low optimization region - place directly above function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+ #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__)
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define LOW_OPTIMIZATION_EXIT
+
+ /* Enter low optimization region - place directly above function definition */
+ #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+ _Pragma ("optimize=low")
+ #else
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #endif
+
+ /* Exit low optimization region - place directly after end of function definition */
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__)
+ #define LOW_OPTIMIZATION_ENTER
+ #define LOW_OPTIMIZATION_EXIT
+ #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+ #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_armcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_armcc.h
new file mode 100644
index 00000000..f2bb66a0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_armcc.h
@@ -0,0 +1,734 @@
+/**************************************************************************//**
+ * @file cmsis_armcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_H
+#define __CMSIS_ARMCC_H
+
+
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+ register uint32_t __regBasePriMax __ASM("basepri_max");
+ __regBasePriMax = (basePri & 0xFFU);
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0U);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() do {\
+ __schedule_barrier();\
+ __isb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+ __schedule_barrier();\
+ __dsb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+ __schedule_barrier();\
+ __dmb(0xF);\
+ __schedule_barrier();\
+ } while (0U)
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ #define __RBIT __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+#else
+ #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+#else
+ #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+#else
+ #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXB(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXH(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
+ #define __STREXW(value, ptr) __strex(value, ptr)
+#else
+ #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
+#endif
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32U) ) >> 32U))
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_armcc_V6.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_armcc_V6.h
new file mode 100644
index 00000000..d714e9b0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_armcc_V6.h
@@ -0,0 +1,1800 @@
+/**************************************************************************//**
+ * @file cmsis_armcc_V6.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_ARMCC_V6_H
+#define __CMSIS_ARMCC_V6_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Control Register (non-secure)
+ \details Returns the content of the non-secure Control Register when in secure mode.
+ \return non-secure Control Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Control Register (non-secure)
+ \details Writes the given value to the non-secure Control Register when in secure state.
+ \param [in] control Control Register value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control)
+{
+ __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get IPSR Register (non-secure)
+ \details Returns the content of the non-secure IPSR Register when in secure state.
+ \return IPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get APSR Register (non-secure)
+ \details Returns the content of the non-secure APSR Register when in secure state.
+ \return APSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get xPSR Register (non-secure)
+ \details Returns the content of the non-secure xPSR Register when in secure state.
+ \return xPSR Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Process Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
+ \return PSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Main Stack Pointer (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
+ \return MSP Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Main Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp");
+}
+#endif
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Priority Mask (non-secure)
+ \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
+ \return Priority Mask value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Priority Mask (non-secure)
+ \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
+ \param [in] priMask Priority Mask
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
+}
+#endif
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Base Priority (non-secure)
+ \details Returns the current value of the non-secure Base Priority register when in secure state.
+ \return Base Priority register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority (non-secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Base Priority with condition (non_secure)
+ \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory");
+}
+#endif
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get Fault Mask (non-secure)
+ \details Returns the current value of the non-secure Fault Mask register when in secure state.
+ \return Fault Mask register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set Fault Mask (non-secure)
+ \details Assigns the given value to the non-secure Fault Mask register when in secure state.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
+}
+#endif
+
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Get Process Stack Pointer Limit
+ \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim" : "=r" (result) );
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Process Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \return PSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Process Stack Pointer Limit
+ \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Process Stack Pointer (non-secure)
+ \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
+ \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
+{
+ __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
+}
+#endif
+
+
+/**
+ \brief Get Main Stack Pointer Limit
+ \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim" : "=r" (result) );
+
+ return(result);
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Get Main Stack Pointer Limit (non-secure)
+ \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
+ \return MSPLIM Register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Set Main Stack Pointer Limit
+ \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
+ \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
+}
+
+
+#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
+/**
+ \brief Set Main Stack Pointer Limit (non-secure)
+ \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
+ \param [in] MainStackPtrLimit Main Stack Pointer value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
+{
+ __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
+}
+#endif
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+
+#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */
+
+/**
+ \brief Get FPSCR
+ \details eturns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+#define __get_FPSCR __builtin_arm_get_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Get FPSCR (non-secure)
+ \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state.
+ \return Floating Point Status/Control register value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+#endif
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+#define __set_FPSCR __builtin_arm_set_fpscr
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#if (__ARM_FEATURE_CMSE == 3U)
+/**
+ \brief Set FPSCR (non-secure)
+ \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+#endif
+
+#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __builtin_arm_nop
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+#define __WFI __builtin_arm_wfi
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __builtin_arm_wfe
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __builtin_arm_sev
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+#define __ISB() __builtin_arm_isb(0xF);
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __builtin_arm_dsb(0xF);
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __builtin_arm_dmb(0xF);
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __builtin_bswap32
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+#if 0
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+#endif
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] op1 Value to rotate
+ \param [in] op2 Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+ /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB (uint8_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH (uint16_t)__builtin_arm_ldrex
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW (uint32_t)__builtin_arm_ldrex
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW (uint32_t)__builtin_arm_strex
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+#define __CLREX __builtin_arm_clrex
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+/*#define __SSAT __builtin_arm_ssat*/
+#define __SSAT(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __builtin_arm_usat
+#if 0
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+#endif
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
+}
+
+#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
+
+
+#if (__ARM_ARCH_8M__ == 1U)
+
+/**
+ \brief Load-Acquire (8 bit)
+ \details Executes a LDAB instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint8_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (16 bit)
+ \details Executes a LDAH instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return ((uint16_t) result);
+}
+
+
+/**
+ \brief Load-Acquire (32 bit)
+ \details Executes a LDA instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr)
+{
+ uint32_t result;
+
+ __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
+ return(result);
+}
+
+
+/**
+ \brief Store-Release (8 bit)
+ \details Executes a STLB instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
+{
+ __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (16 bit)
+ \details Executes a STLH instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
+{
+ __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Store-Release (32 bit)
+ \details Executes a STL instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr)
+{
+ __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief Load-Acquire Exclusive (8 bit)
+ \details Executes a LDAB exclusive instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDAEXB (uint8_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (16 bit)
+ \details Executes a LDAH exclusive instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDAEXH (uint16_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Load-Acquire Exclusive (32 bit)
+ \details Executes a LDA exclusive instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDAEX (uint32_t)__builtin_arm_ldaex
+
+
+/**
+ \brief Store-Release Exclusive (8 bit)
+ \details Executes a STLB exclusive instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXB (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (16 bit)
+ \details Executes a STLH exclusive instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEXH (uint32_t)__builtin_arm_stlex
+
+
+/**
+ \brief Store-Release Exclusive (32 bit)
+ \details Executes a STL exclusive instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STLEX (uint32_t)__builtin_arm_stlex
+
+#endif /* (__ARM_ARCH_8M__ == 1U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__ARM_FEATURE_DSP == 1U) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CMSIS_ARMCC_V6_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_gcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_gcc.h
new file mode 100644
index 00000000..d868f2e6
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/cmsis_gcc.h
@@ -0,0 +1,1373 @@
+/**************************************************************************//**
+ * @file cmsis_gcc.h
+ * @brief CMSIS Cortex-M Core Function/Instruction Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CMSIS_GCC_H
+#define __CMSIS_GCC_H
+
+/* ignore some GCC warnings */
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+/**
+ \brief Enable IRQ Interrupts
+ \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/**
+ \brief Disable IRQ Interrupts
+ \details Disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/**
+ \brief Get Control Register
+ \details Returns the content of the Control Register.
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Control Register
+ \details Writes the given value to the Control Register.
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/**
+ \brief Get IPSR Register
+ \details Returns the content of the IPSR Register.
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get APSR Register
+ \details Returns the content of the APSR Register.
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get xPSR Register
+ \details Returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Get Process Stack Pointer
+ \details Returns the current value of the Process Stack Pointer (PSP).
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Process Stack Pointer
+ \details Assigns the given value to the Process Stack Pointer (PSP).
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/**
+ \brief Get Main Stack Pointer
+ \details Returns the current value of the Main Stack Pointer (MSP).
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Main Stack Pointer
+ \details Assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/**
+ \brief Get Priority Mask
+ \details Returns the current state of the priority mask bit from the Priority Mask Register.
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Priority Mask
+ \details Assigns the given value to the Priority Mask Register.
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03U)
+
+/**
+ \brief Enable FIQ
+ \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/**
+ \brief Disable FIQ
+ \details Disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/**
+ \brief Get Base Priority
+ \details Returns the current value of the Base Priority register.
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Base Priority
+ \details Assigns the given value to the Base Priority register.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Set Base Priority with condition
+ \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+ or the new value increases the BASEPRI priority level.
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+ __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/**
+ \brief Get Fault Mask
+ \details Returns the current value of the Fault Mask register.
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/**
+ \brief Set Fault Mask
+ \details Assigns the given value to the Fault Mask register.
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03U) */
+
+
+#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
+
+/**
+ \brief Get FPSCR
+ \details Returns the current value of the Floating Point Status/Control register.
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/**
+ \brief Set FPSCR
+ \details Assigns the given value to the Floating Point Status/Control register.
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
+
+
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constraint "l"
+ * Otherwise, use general registers, specified by constraint "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/**
+ \brief No Operation
+ \details No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/**
+ \brief Wait For Interrupt
+ \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/**
+ \brief Wait For Event
+ \details Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/**
+ \brief Send Event
+ \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/**
+ \brief Instruction Synchronization Barrier
+ \details Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or memory,
+ after the instruction has been completed.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Synchronization Barrier
+ \details Acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/**
+ \brief Data Memory Barrier
+ \details Ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/**
+ \brief Reverse byte order (32 bit)
+ \details Reverses the byte order in integer value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Reverse byte order (16 bit)
+ \details Reverses the byte order in two unsigned short values.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief Reverse byte order in signed short value
+ \details Reverses the byte order in a signed short value with sign extension to integer.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ int32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/**
+ \brief Rotate Right in unsigned value (32 bit)
+ \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32U - op2));
+}
+
+
+/**
+ \brief Breakpoint
+ \details Causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+/**
+ \brief Reverse bit order of value
+ \details Reverses the bit order of the given value.
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+ int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
+
+ result = value; /* r will be reversed bits of v; first get LSB of v */
+ for (value >>= 1U; value; value >>= 1U)
+ {
+ result <<= 1U;
+ result |= value & 1U;
+ s--;
+ }
+ result <<= s; /* shift when v's highest bits are zero */
+#endif
+ return(result);
+}
+
+
+/**
+ \brief Count leading zeros
+ \details Counts the number of leading zeros of a data value.
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __builtin_clz
+
+
+#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
+
+/**
+ \brief LDR Exclusive (8 bit)
+ \details Executes a exclusive LDR instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (16 bit)
+ \details Executes a exclusive LDR instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDR Exclusive (32 bit)
+ \details Executes a exclusive LDR instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (8 bit)
+ \details Executes a exclusive STR instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (16 bit)
+ \details Executes a exclusive STR instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/**
+ \brief STR Exclusive (32 bit)
+ \details Executes a exclusive STR instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/**
+ \brief Remove the exclusive lock
+ \details Removes the exclusive lock which is created by LDREX.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/**
+ \brief Signed Saturate
+ \details Saturates a signed value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Unsigned Saturate
+ \details Saturates an unsigned value.
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/**
+ \brief Rotate Right with Extend (32 bit)
+ \details Moves each bit of a bitstring right by one bit.
+ The carry input is shifted in at the left end of the bitstring.
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/**
+ \brief LDRT Unprivileged (8 bit)
+ \details Executes a Unprivileged LDRT instruction for 8 bit value.
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (16 bit)
+ \details Executes a Unprivileged LDRT instruction for 16 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/**
+ \brief LDRT Unprivileged (32 bit)
+ \details Executes a Unprivileged LDRT instruction for 32 bit values.
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/**
+ \brief STRT Unprivileged (8 bit)
+ \details Executes a Unprivileged STRT instruction for 8 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (16 bit)
+ \details Executes a Unprivileged STRT instruction for 16 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/**
+ \brief STRT Unprivileged (32 bit)
+ \details Executes a Unprivileged STRT instruction for 32 bit values.
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ int32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+ union llreg_u{
+ uint32_t w32[2];
+ uint64_t w64;
+ } llr;
+ llr.w64 = acc;
+
+#ifndef __ARMEB__ /* Little endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else /* Big endian */
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+ return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
+{
+ int32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x04) */
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#if defined ( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
+#endif /* __CMSIS_GCC_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm0.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm0.h
new file mode 100644
index 00000000..fdee521a
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm0.h
@@ -0,0 +1,798 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000U
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm0plus.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm0plus.h
new file mode 100644
index 00000000..7614450d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm0plus.h
@@ -0,0 +1,914 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0+ definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
+ __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000U
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0U
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1U)
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1U)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the Cortex-M0+ header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm3.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm3.h
new file mode 100644
index 00000000..34ed84c1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm3.h
@@ -0,0 +1,1763 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200U
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201U) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U))
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1U];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm4.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm4.h
new file mode 100644
index 00000000..01cb73bf
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm4.h
@@ -0,0 +1,1937 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000U
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm7.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm7.h
new file mode 100644
index 00000000..20963c14
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cm7.h
@@ -0,0 +1,2512 @@
+/**************************************************************************//**
+ * @file core_cm7.h
+ * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup Cortex_M7
+ @{
+ */
+
+/* CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \
+ __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x07U) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1U
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #if (__FPU_PRESENT == 1U)
+ #define __FPU_USED 1U
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0U
+ #endif
+ #else
+ #define __FPU_USED 0U
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM7_REV
+ #define __CM7_REV 0x0000U
+ #warning "__CM7_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0U
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __ICACHE_PRESENT
+ #define __ICACHE_PRESENT 0U
+ #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DCACHE_PRESENT
+ #define __DCACHE_PRESENT 0U
+ #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __DTCM_PRESENT
+ #define __DTCM_PRESENT 0U
+ #warning "__DTCM_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 3U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos 16U /*!< APSR: GE Position */
+#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
+#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[1U];
+ __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */
+ __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */
+ __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */
+ __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED3[93U];
+ __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */
+ uint32_t RESERVED4[15U];
+ __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */
+ uint32_t RESERVED5[1U];
+ __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */
+ uint32_t RESERVED6[1U];
+ __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */
+ __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */
+ __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */
+ __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */
+ __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */
+ __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */
+ __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */
+ __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */
+ uint32_t RESERVED7[6U];
+ __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */
+ __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */
+ __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */
+ __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */
+ __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */
+ uint32_t RESERVED8[1U];
+ __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/* SCB Cache Level ID Register Definitions */
+#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */
+
+/* SCB Cache Type Register Definitions */
+#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */
+
+/* SCB Cache Size ID Register Definitions */
+#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */
+
+/* SCB Cache Size Selection Register Definitions */
+#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register Definitions */
+#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */
+
+/* SCB D-Cache Invalidate by Set-way Register Definitions */
+#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */
+#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */
+
+#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */
+#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */
+
+/* SCB D-Cache Clean by Set-way Register Definitions */
+#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */
+#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */
+
+#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */
+#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */
+
+/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
+#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */
+#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */
+
+#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */
+#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register Definitions */
+#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Register Definitions */
+#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register Definitions */
+#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register Definitions */
+#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */
+
+/* AHBS Control Register Definitions */
+#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register Definitions */
+#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+ uint32_t RESERVED3[981U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+ __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register Definitions */
+#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register Definitions */
+#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register Definitions */
+#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 Definitions */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 Definitions */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 Definitions */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1U)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ########################## FPU functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_FpuFunctions FPU Functions
+ \brief Function that provides FPU type.
+ @{
+ */
+
+/**
+ \brief get FPU type
+ \details returns the FPU type
+ \returns
+ - \b 0: No FPU
+ - \b 1: Single precision FPU
+ - \b 2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+ uint32_t mvfr0;
+
+ mvfr0 = SCB->MVFR0;
+ if ((mvfr0 & 0x00000FF0UL) == 0x220UL)
+ {
+ return 2UL; /* Double + Single precision FPU */
+ }
+ else if ((mvfr0 & 0x00000FF0UL) == 0x020UL)
+ {
+ return 1UL; /* Single precision FPU */
+ }
+ else
+ {
+ return 0UL; /* No FPU */
+ }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ########################## Cache functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_CacheFunctions Cache Functions
+ \brief Functions that configure Instruction and Data cache.
+ @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
+
+
+/**
+ \brief Enable I-Cache
+ \details Turns on I-Cache
+ */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable I-Cache
+ \details Turns off I-Cache
+ */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */
+ SCB->ICIALLU = 0UL; /* invalidate I-Cache */
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate I-Cache
+ \details Invalidates I-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+ #if (__ICACHE_PRESENT == 1U)
+ __DSB();
+ __ISB();
+ SCB->ICIALLU = 0UL;
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Enable D-Cache
+ \details Turns on D-Cache
+ */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+ __DSB();
+
+ SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Disable D-Cache
+ \details Turns off D-Cache
+ */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Invalidate D-Cache
+ \details Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
+ ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean D-Cache
+ \details Cleans D-Cache
+ */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
+ ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief Clean & Invalidate D-Cache
+ \details Cleans and Invalidates D-Cache
+ */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ uint32_t ccsidr;
+ uint32_t sets;
+ uint32_t ways;
+
+ SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
+ __DSB();
+
+ ccsidr = SCB->CCSIDR;
+
+ /* clean & invalidate D-Cache */
+ sets = (uint32_t)(CCSIDR_SETS(ccsidr));
+ do {
+ ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
+ do {
+ SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
+ ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
+ #if defined ( __CC_ARM )
+ __schedule_barrier();
+ #endif
+ } while (ways--);
+ } while(sets--);
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Invalidate by address
+ \details Invalidates D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t)addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean by address
+ \details Cleans D-Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/**
+ \brief D-Cache Clean and Invalidate by address
+ \details Cleans and invalidates D_Cache for the given address
+ \param[in] addr address (aligned to 32-byte boundary)
+ \param[in] dsize size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+ #if (__DCACHE_PRESENT == 1U)
+ int32_t op_size = dsize;
+ uint32_t op_addr = (uint32_t) addr;
+ int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
+
+ __DSB();
+
+ while (op_size > 0) {
+ SCB->DCCIMVAC = op_addr;
+ op_addr += linesize;
+ op_size -= linesize;
+ }
+
+ __DSB();
+ __ISB();
+ #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmFunc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmFunc.h
new file mode 100644
index 00000000..ca319a55
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmFunc.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmInstr.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmInstr.h
new file mode 100644
index 00000000..a0a50645
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmInstr.h
@@ -0,0 +1,87 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmSimd.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmSimd.h
new file mode 100644
index 00000000..4d76bf90
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_cmSimd.h
@@ -0,0 +1,96 @@
+/**************************************************************************//**
+ * @file core_cmSimd.h
+ * @brief CMSIS Cortex-M SIMD Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if defined ( __CC_ARM )
+ #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+ #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+ #include
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+ #include
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+ /*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+ #include
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_sc000.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_sc000.h
new file mode 100644
index 00000000..ea16bf3e
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_sc000.h
@@ -0,0 +1,926 @@
+/**************************************************************************//**
+ * @file core_sc000.h
+ * @brief CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC000
+ @{
+ */
+
+/* CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
+ __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (000U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC000_REV
+ #define __SC000_REV 0x0000U
+ #warning "__SC000_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:1; /*!< bit: 0 Reserved */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31U];
+ __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31U];
+ __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31U];
+ __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31U];
+ uint32_t RESERVED4[64U];
+ __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ uint32_t RESERVED1[154U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
+ Therefore they are not covered by the SC000 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
+#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
+#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+ else
+ {
+ NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+ (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_sc300.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_sc300.h
new file mode 100644
index 00000000..820cef4f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/CMSIS/Include/core_sc300.h
@@ -0,0 +1,1745 @@
+/**************************************************************************//**
+ * @file core_sc300.h
+ * @brief CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version V4.30
+ * @date 20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #pragma clang system_header /* treat file as system include file */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#include
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/**
+ \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/**
+ \ingroup SC3000
+ @{
+ */
+
+/* CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
+#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
+ __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_SC (300U) /*!< Cortex secure core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
+ #define __STATIC_INLINE static inline
+
+#else
+ #error Unknown compiler
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0U
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+ #if defined __ARM_PCS_VFP
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ )
+ #if ( __CSMC__ & 0x400U)
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#endif
+
+#include "core_cmInstr.h" /* Core Instruction Access */
+#include "core_cmFunc.h" /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __SC300_REV
+ #define __SC300_REV 0x0000U
+ #warning "__SC300_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0U
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4U
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0U
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/* following defines should be used for structure members */
+#define __IM volatile const /*! Defines 'read only' structure member permissions */
+#define __OM volatile /*! Defines 'write only' structure member permissions */
+#define __IOM volatile /*! Defines 'read / write' structure member permissions */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/**
+ \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos 31U /*!< APSR: N Position */
+#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
+
+#define APSR_Z_Pos 30U /*!< APSR: Z Position */
+#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
+
+#define APSR_C_Pos 29U /*!< APSR: C Position */
+#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
+
+#define APSR_V_Pos 28U /*!< APSR: V Position */
+#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
+
+#define APSR_Q_Pos 27U /*!< APSR: Q Position */
+#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
+
+
+/**
+ \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos 31U /*!< xPSR: N Position */
+#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
+#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos 29U /*!< xPSR: C Position */
+#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos 28U /*!< xPSR: V Position */
+#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
+#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
+#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos 24U /*!< xPSR: T Position */
+#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
+
+
+/**
+ \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24U];
+ __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24U];
+ __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24U];
+ __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24U];
+ __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56U];
+ __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644U];
+ __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5U];
+ __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+ uint32_t RESERVED1[129U];
+ __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Register Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Register Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1U];
+ __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ uint32_t RESERVED1[1U];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/**
+ \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __OM union
+ {
+ __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864U];
+ __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15U];
+ __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15U];
+ __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29U];
+ __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43U];
+ __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6U];
+ __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1U];
+ __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1U];
+ __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1U];
+ __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2U];
+ __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55U];
+ __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131U];
+ __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759U];
+ __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1U];
+ __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39U];
+ __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8U];
+ __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1U)
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/**
+ \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register Definitions */
+#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register Definitions */
+#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register Definitions */
+#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register Definitions */
+#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register Definitions */
+#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/**
+ \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register Definitions */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register Definitions */
+#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register Definitions */
+#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_bitfield Core register bit field macros
+ \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
+ @{
+ */
+
+/**
+ \brief Mask and shift a bit field value for use in a register bit range.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of the bit field.
+ \return Masked and shifted value.
+*/
+#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
+
+/**
+ \brief Mask and shift a register value to extract a bit filed value.
+ \param[in] field Name of the register bit field.
+ \param[in] value Value of register.
+ \return Masked and shifted bit field value.
+*/
+#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
+
+/*@} end of group CMSIS_core_bitfield */
+
+
+/**
+ \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1U)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/**
+ \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/**
+ \brief Set Priority Grouping
+ \details Sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/**
+ \brief Get Priority Grouping
+ \details Reads the priority grouping field from the NVIC Interrupt Controller.
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/**
+ \brief Enable External Interrupt
+ \details Enables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Disable External Interrupt
+ \details Disables a device-specific interrupt in the NVIC interrupt controller.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Pending Interrupt
+ \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Pending Interrupt
+ \details Sets the pending bit of an external interrupt.
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Clear Pending Interrupt
+ \details Clears the pending bit of an external interrupt.
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/**
+ \brief Get Active Interrupt
+ \details Reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Interrupt number.
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/**
+ \brief Set Interrupt Priority
+ \details Sets the priority of an interrupt.
+ \note The priority cannot be set for every core interrupt.
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if ((int32_t)(IRQn) < 0)
+ {
+ SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+ else
+ {
+ NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+ }
+}
+
+
+/**
+ \brief Get Interrupt Priority
+ \details Reads the priority of an interrupt.
+ The interrupt number can be positive to specify an external (device specific) interrupt,
+ or negative to specify an internal (core) interrupt.
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority.
+ Value is aligned automatically to the implemented priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if ((int32_t)(IRQn) < 0)
+ {
+ return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
+ }
+ else
+ {
+ return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
+ }
+}
+
+
+/**
+ \brief Encode Priority
+ \details Encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ return (
+ ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+ ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
+ );
+}
+
+
+/**
+ \brief Decode Priority
+ \details Decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+ SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+ *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
+}
+
+
+/**
+ \brief System Reset
+ \details Initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+
+ for(;;) /* wait until reset */
+ {
+ __NOP();
+ }
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0U)
+
+/**
+ \brief System Tick Configuration
+ \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+ \param [in] ticks Number of ticks between two interrupts.
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device .h
+ must contain a vendor-specific implementation of this function.
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
+ {
+ return (1UL); /* Reload value impossible */
+ }
+
+ SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0UL); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/**
+ \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/**
+ \brief ITM Send Character
+ \details Transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+ \param [in] ch Character to transmit.
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
+ ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0U].u32 == 0UL)
+ {
+ __NOP();
+ }
+ ITM->PORT[0U].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}
+
+
+/**
+ \brief ITM Receive Character
+ \details Inputs a character via the external variable \ref ITM_RxBuffer.
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void)
+{
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
+ {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ \brief ITM Check Character
+ \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void)
+{
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
+ {
+ return (0); /* no character available */
+ }
+ else
+ {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 00000000..d261da88
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,3173 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#define COMP_LPTIMCONNECTION_ENABLED COMP_LPTIMCONNECTION_IN1_ENABLED /*!< COMPX output is connected to LPTIM input 1 */
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */
+/* to the second dedicated IO (only for COMP2). */
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE 0x00000000U
+#define DAC_WAVE_NOISE DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define __DIV_LPUART UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR 0x00000100U
+#define ETH_MMCRIR 0x00000104U
+#define ETH_MMCTIR 0x00000108U
+#define ETH_MMCRIMR 0x0000010CU
+#define ETH_MMCTIMR 0x00000110U
+#define ETH_MMCTGFSCCR 0x0000014CU
+#define ETH_MMCTGFMSCCR 0x00000150U
+#define ETH_MMCTGFCR 0x00000168U
+#define ETH_MMCRFCECR 0x00000194U
+#define ETH_MMCRFAECR 0x00000198U
+#define ETH_MMCRGUFCR 0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */
+#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4 || STM32F7*/
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE RCC_IT_LSECSS
+#define RCC_IT_CSSHSE RCC_IT_CSS
+
+#define RCC_PLLMUL_3 RCC_PLL_MUL3
+#define RCC_PLLMUL_4 RCC_PLL_MUL4
+#define RCC_PLLMUL_6 RCC_PLL_MUL6
+#define RCC_PLLMUL_8 RCC_PLL_MUL8
+#define RCC_PLLMUL_12 RCC_PLL_MUL12
+#define RCC_PLLMUL_16 RCC_PLL_MUL16
+#define RCC_PLLMUL_24 RCC_PLL_MUL24
+#define RCC_PLLMUL_32 RCC_PLL_MUL32
+#define RCC_PLLMUL_48 RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2 RCC_PLL_DIV2
+#define RCC_PLLDIV_3 RCC_PLL_DIV3
+#define RCC_PLLDIV_4 RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2)
+#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef
+#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef
+#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef
+#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal.h
new file mode 100644
index 00000000..ca95785d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal.h
@@ -0,0 +1,916 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_H
+#define __STM32F3xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_conf.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Macros
+ * @{
+ */
+#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9))
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+/** @defgroup SYSCFG_BitAddress_AliasRegion SYSCFG registers bit address in the alias region
+ * @brief SYSCFG registers bit address in the alias region
+ * @{
+ */
+/* ------------ SYSCFG registers bit address in the alias region -------------*/
+#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
+/* --- CFGR2 Register ---*/
+/* Alias word address of BYP_ADDR_PAR bit */
+#define CFGR2_OFFSET (SYSCFG_OFFSET + 0x18U)
+#define BYPADDRPAR_BitNumber 0x04U
+#define CFGR2_BYPADDRPAR_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32U) + (BYPADDRPAR_BitNumber * 4U))
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_Remapping HAL DMA Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG (not available on STM32F373xC/STM32F378xx devices)
+ * @{
+ */
+#define HAL_REMAPDMA_ADC24_DMA2_CH34 (0x00000100U) /*!< ADC24 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (ADC24 DMA requests mapped on DMA2 channels 3 and 4) */
+#define HAL_REMAPDMA_TIM16_DMA1_CH6 (0x00000800U) /*!< TIM16 DMA request remap
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA1 channel 6) */
+#define HAL_REMAPDMA_TIM17_DMA1_CH7 (0x00001000U) /*!< TIM17 DMA request remap
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA1 channel 7) */
+#define HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3 (0x00002000U) /*!< TIM6 and DAC channel1 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (TIM6_UP and DAC_CH1 DMA requests mapped on DMA1 channel 3) */
+#define HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4 (0x00004000U) /*!< TIM7 and DAC channel2 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (TIM7_UP and DAC_CH2 DMA requests mapped on DMA1 channel 4) */
+#define HAL_REMAPDMA_DAC2_CH1_DMA1_CH5 (0x00008000U) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#define HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5 (0x00008000U) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK (0x01000000U)
+#endif
+
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH2 (0x01000003U) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH4 (0x01000001U) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH6 (0x01000002U) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH3 (0x0100000CU) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH5 (0x01000004U) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH7 (0x01000008U) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH7 (0x01000030U) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH3 (0x01000010U) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH5 (0x01000020U) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH6 (0x010000C0U) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH2 (0x01000040U) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH4 (0x01000080U) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH2 (0x01000100U) /*!< ADC2 DMA remap
+ x0: No remap (ADC2 on DMA2)
+ 10: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH4 (0x01000300U) /*!< ADC2 DMA remap
+ 11: Map on DMA1 channel 4 */
+#endif /* SYSCFG_CFGR3_DMA_RMP */
+
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#define IS_DMA_REMAP(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH2) == HAL_REMAPDMA_SPI1_RX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH4) == HAL_REMAPDMA_SPI1_RX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH6) == HAL_REMAPDMA_SPI1_RX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH3) == HAL_REMAPDMA_SPI1_TX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH5) == HAL_REMAPDMA_SPI1_TX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH7) == HAL_REMAPDMA_SPI1_TX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH7) == HAL_REMAPDMA_I2C1_RX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH3) == HAL_REMAPDMA_I2C1_RX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH5) == HAL_REMAPDMA_I2C1_RX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH6) == HAL_REMAPDMA_I2C1_TX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH2) == HAL_REMAPDMA_I2C1_TX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH4) == HAL_REMAPDMA_I2C1_TX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH2) == HAL_REMAPDMA_ADC2_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH4) == HAL_REMAPDMA_ADC2_DMA1_CH4))
+#else
+#define IS_DMA_REMAP(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5))
+#endif /* SYSCFG_CFGR3_DMA_RMP && SYSCFG_CFGR1_DMA_RMP*/
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+/** @defgroup HAL_Trigger_Remapping HAL Trigger Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG
+ * @{
+ */
+#define HAL_REMAPTRIGGER_DAC1_TRIG (0x00000080U) /*!< DAC trigger remap (when TSEL = 001 on STM32F303xB/C and STM32F358xx devices)
+ 0: No remap (DAC trigger is TIM8_TRGO)
+ 1: Remap (DAC trigger is TIM3_TRGO) */
+#define HAL_REMAPTRIGGER_TIM1_ITR3 (0x00000040U) /*!< TIM1 ITR3 trigger remap
+ 0: No remap
+ 1: Remap (TIM1_TRG3 = TIM17_OC) */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK (0x01000000U)
+#endif
+#define HAL_REMAPTRIGGER_DAC1_TRIG3 (0x01010000U) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: Remap (DAC trigger is TIM15_TRGO)
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG1) */
+#define HAL_REMAPTRIGGER_DAC1_TRIG5 (0x01020000U) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: No remap
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG2) */
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG3) == HAL_REMAPTRIGGER_DAC1_TRIG3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG5) == HAL_REMAPTRIGGER_DAC1_TRIG5))
+#else
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3))
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+#if defined (STM32F302xE)
+/** @defgroup HAL_ADC_Trigger_Remapping HAL ADC Trigger Remapping
+ * @{
+ */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT2 SYSCFG_CFGR4_ADC12_EXT2_RMP /*!< Input trigger of ADC12 regular channel EXT2
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT3 SYSCFG_CFGR4_ADC12_EXT3_RMP /*!< Input trigger of ADC12 regular channel EXT3
+ 0: No remap (TIM2_CC2)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT5 SYSCFG_CFGR4_ADC12_EXT5_RMP /*!< Input trigger of ADC12 regular channel EXT5
+ 0: No remap (TIM4_CC4)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT13 SYSCFG_CFGR4_ADC12_EXT13_RMP /*!< Input trigger of ADC12 regular channel EXT13
+ 0: No remap (TIM6_TRGO)
+ 1: Remap (TIM20_CC2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT15 SYSCFG_CFGR4_ADC12_EXT15_RMP /*!< Input trigger of ADC12 regular channel EXT15
+ 0: No remap (TIM3_CC4)
+ 1: Remap (TIM20_CC3) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT3 SYSCFG_CFGR4_ADC12_JEXT3_RMP /*!< Input trigger of ADC12 injected channel JEXT3
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT6 SYSCFG_CFGR4_ADC12_JEXT6_RMP /*!< Input trigger of ADC12 injected channel JEXT6
+ 0: No remap (EXTI line 15)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT13 SYSCFG_CFGR4_ADC12_JEXT13_RMP /*!< Input trigger of ADC12 injected channel JEXT13
+ 0: No remap (TIM3_CC1)
+ 1: Remap (TIM20_CC4) */
+
+#define IS_HAL_REMAPADCTRIGGER(RMP) ((((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT2) == HAL_REMAPADCTRIGGER_ADC12_EXT2) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT3) == HAL_REMAPADCTRIGGER_ADC12_EXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT5) == HAL_REMAPADCTRIGGER_ADC12_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT13) == HAL_REMAPADCTRIGGER_ADC12_EXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT15) == HAL_REMAPADCTRIGGER_ADC12_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT3) == HAL_REMAPADCTRIGGER_ADC12_JEXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT6) == HAL_REMAPADCTRIGGER_ADC12_JEXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT13) == HAL_REMAPADCTRIGGER_ADC12_JEXT13))
+/**
+ * @}
+ */
+#endif /* STM32F302xE */
+
+#if defined (STM32F303xE) || defined (STM32F398xx)
+/** @defgroup HAL_ADC_Trigger_Remapping HAL ADC Trigger Remapping
+ * @{
+ */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT2 SYSCFG_CFGR4_ADC12_EXT2_RMP /*!< Input trigger of ADC12 regular channel EXT2
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT3 SYSCFG_CFGR4_ADC12_EXT3_RMP /*!< Input trigger of ADC12 regular channel EXT3
+ 0: No remap (TIM2_CC2)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT5 SYSCFG_CFGR4_ADC12_EXT5_RMP /*!< Input trigger of ADC12 regular channel EXT5
+ 0: No remap (TIM4_CC4)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT13 SYSCFG_CFGR4_ADC12_EXT13_RMP /*!< Input trigger of ADC12 regular channel EXT13
+ 0: No remap (TIM6_TRGO)
+ 1: Remap (TIM20_CC2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT15 SYSCFG_CFGR4_ADC12_EXT15_RMP /*!< Input trigger of ADC12 regular channel EXT15
+ 0: No remap (TIM3_CC4)
+ 1: Remap (TIM20_CC3) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT3 SYSCFG_CFGR4_ADC12_JEXT3_RMP /*!< Input trigger of ADC12 injected channel JEXT3
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT6 SYSCFG_CFGR4_ADC12_JEXT6_RMP /*!< Input trigger of ADC12 injected channel JEXT6
+ 0: No remap (EXTI line 15)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT13 SYSCFG_CFGR4_ADC12_JEXT13_RMP /*!< Input trigger of ADC12 injected channel JEXT13
+ 0: No remap (TIM3_CC1)
+ 1: Remap (TIM20_CC4) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT5 SYSCFG_CFGR4_ADC34_EXT5_RMP /*!< Input trigger of ADC34 regular channel EXT5
+ 0: No remap (EXTI line 2)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT6 SYSCFG_CFGR4_ADC34_EXT6_RMP /*!< Input trigger of ADC34 regular channel EXT6
+ 0: No remap (TIM4_CC1)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT15 SYSCFG_CFGR4_ADC34_EXT15_RMP /*!< Input trigger of ADC34 regular channel EXT15
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT5 SYSCFG_CFGR4_ADC34_JEXT5_RMP /*!< Input trigger of ADC34 injected channel JEXT5
+ 0: No remap (TIM4_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT11 SYSCFG_CFGR4_ADC34_JEXT11_RMP /*!< Input trigger of ADC34 injected channel JEXT11
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT14 SYSCFG_CFGR4_ADC34_JEXT14_RMP /*!< Input trigger of ADC34 injected channel JEXT14
+ 0: No remap (TIM7_TRGO)
+ 1: Remap (TIM20_CC2) */
+
+#define IS_HAL_REMAPADCTRIGGER(RMP) ((((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT2) == HAL_REMAPADCTRIGGER_ADC12_EXT2) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT3) == HAL_REMAPADCTRIGGER_ADC12_EXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT5) == HAL_REMAPADCTRIGGER_ADC12_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT13) == HAL_REMAPADCTRIGGER_ADC12_EXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT15) == HAL_REMAPADCTRIGGER_ADC12_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT3) == HAL_REMAPADCTRIGGER_ADC12_JEXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT6) == HAL_REMAPADCTRIGGER_ADC12_JEXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT13) == HAL_REMAPADCTRIGGER_ADC12_JEXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT5) == HAL_REMAPADCTRIGGER_ADC34_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT6) == HAL_REMAPADCTRIGGER_ADC34_EXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT15) == HAL_REMAPADCTRIGGER_ADC34_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT5) == HAL_REMAPADCTRIGGER_ADC34_JEXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT11) == HAL_REMAPADCTRIGGER_ADC34_JEXT11) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT14) == HAL_REMAPADCTRIGGER_ADC34_JEXT14))
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO
+ * @{
+ */
+
+/** @brief Fast-mode Plus driving capability on a specific GPIO
+ */
+#if defined(SYSCFG_CFGR1_I2C_PB6_FMP)
+#define SYSCFG_FASTMODEPLUS_PB6 ((uint32_t)SYSCFG_CFGR1_I2C_PB6_FMP) /*!< Enable Fast-mode Plus on PB6 */
+#endif /* SYSCFG_CFGR1_I2C_PB6_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB7_FMP)
+#define SYSCFG_FASTMODEPLUS_PB7 ((uint32_t)SYSCFG_CFGR1_I2C_PB7_FMP) /*!< Enable Fast-mode Plus on PB7 */
+#endif /* SYSCFG_CFGR1_I2C_PB7_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
+#define SYSCFG_FASTMODEPLUS_PB8 ((uint32_t)SYSCFG_CFGR1_I2C_PB8_FMP) /*!< Enable Fast-mode Plus on PB8 */
+#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB9_FMP)
+#define SYSCFG_FASTMODEPLUS_PB9 ((uint32_t)SYSCFG_CFGR1_I2C_PB9_FMP) /*!< Enable Fast-mode Plus on PB9 */
+#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/* CCM-SRAM defined */
+/** @defgroup HAL_Page_Write_Protection HAL CCM RAM page write protection
+ * @{
+ */
+#define HAL_SYSCFG_WP_PAGE0 (SYSCFG_RCR_PAGE0) /*!< ICODE SRAM Write protection page 0 */
+#define HAL_SYSCFG_WP_PAGE1 (SYSCFG_RCR_PAGE1) /*!< ICODE SRAM Write protection page 1 */
+#define HAL_SYSCFG_WP_PAGE2 (SYSCFG_RCR_PAGE2) /*!< ICODE SRAM Write protection page 2 */
+#define HAL_SYSCFG_WP_PAGE3 (SYSCFG_RCR_PAGE3) /*!< ICODE SRAM Write protection page 3 */
+#if defined(SYSCFG_RCR_PAGE4)
+/* More than 4KB CCM-SRAM defined */
+#define HAL_SYSCFG_WP_PAGE4 (SYSCFG_RCR_PAGE4) /*!< ICODE SRAM Write protection page 4 */
+#define HAL_SYSCFG_WP_PAGE5 (SYSCFG_RCR_PAGE5) /*!< ICODE SRAM Write protection page 5 */
+#define HAL_SYSCFG_WP_PAGE6 (SYSCFG_RCR_PAGE6) /*!< ICODE SRAM Write protection page 6 */
+#define HAL_SYSCFG_WP_PAGE7 (SYSCFG_RCR_PAGE7) /*!< ICODE SRAM Write protection page 7 */
+#endif /* SYSCFG_RCR_PAGE4 */
+#if defined(SYSCFG_RCR_PAGE8)
+#define HAL_SYSCFG_WP_PAGE8 (SYSCFG_RCR_PAGE8) /*!< ICODE SRAM Write protection page 8 */
+#define HAL_SYSCFG_WP_PAGE9 (SYSCFG_RCR_PAGE9) /*!< ICODE SRAM Write protection page 9 */
+#define HAL_SYSCFG_WP_PAGE10 (SYSCFG_RCR_PAGE10) /*!< ICODE SRAM Write protection page 10 */
+#define HAL_SYSCFG_WP_PAGE11 (SYSCFG_RCR_PAGE11) /*!< ICODE SRAM Write protection page 11 */
+#define HAL_SYSCFG_WP_PAGE12 (SYSCFG_RCR_PAGE12) /*!< ICODE SRAM Write protection page 12 */
+#define HAL_SYSCFG_WP_PAGE13 (SYSCFG_RCR_PAGE13) /*!< ICODE SRAM Write protection page 13 */
+#define HAL_SYSCFG_WP_PAGE14 (SYSCFG_RCR_PAGE14) /*!< ICODE SRAM Write protection page 14 */
+#define HAL_SYSCFG_WP_PAGE15 (SYSCFG_RCR_PAGE15) /*!< ICODE SRAM Write protection page 15 */
+#endif /* SYSCFG_RCR_PAGE8 */
+
+#if defined(SYSCFG_RCR_PAGE8)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFU))
+#elif defined(SYSCFG_RCR_PAGE4)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0x00FFU))
+#else
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0x000FU))
+#endif /* SYSCFG_RCR_PAGE8 */
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/** @defgroup HAL_SYSCFG_Interrupts HAL SYSCFG Interrupts
+ * @{
+ */
+#define HAL_SYSCFG_IT_FPU_IOC (SYSCFG_CFGR1_FPU_IE_0) /*!< Floating Point Unit Invalid operation Interrupt */
+#define HAL_SYSCFG_IT_FPU_DZC (SYSCFG_CFGR1_FPU_IE_1) /*!< Floating Point Unit Divide-by-zero Interrupt */
+#define HAL_SYSCFG_IT_FPU_UFC (SYSCFG_CFGR1_FPU_IE_2) /*!< Floating Point Unit Underflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_OFC (SYSCFG_CFGR1_FPU_IE_3) /*!< Floating Point Unit Overflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_IDC (SYSCFG_CFGR1_FPU_IE_4) /*!< Floating Point Unit Input denormal Interrupt */
+#define HAL_SYSCFG_IT_FPU_IXC (SYSCFG_CFGR1_FPU_IE_5) /*!< Floating Point Unit Inexact Interrupt */
+
+#define IS_HAL_SYSCFG_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_0) == SYSCFG_CFGR1_FPU_IE_0) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_1) == SYSCFG_CFGR1_FPU_IE_1) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_2) == SYSCFG_CFGR1_FPU_IE_2) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_3) == SYSCFG_CFGR1_FPU_IE_3) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_4) == SYSCFG_CFGR1_FPU_IE_4) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_5) == SYSCFG_CFGR1_FPU_IE_5))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @defgroup Debug_MCU_APB1_Freeze Freeze/Unfreeze APB1 Peripherals in Debug mode
+ * @{
+ */
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM5_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM18_STOP)
+#define __HAL_FREEZE_TIM18_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM18_STOP))
+#define __HAL_UNFREEZE_TIM18_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM18_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+/**
+ * @}
+ */
+
+/** @defgroup Debug_MCU_APB2_Freeze Freeze/Unfreeze APB2 Peripherals in Debug mode
+ * @{
+ */
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM15() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM16() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM17() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM19_STOP)
+#define __HAL_FREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#define __HAL_UNFREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM19_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM20_STOP)
+#define __HAL_FREEZE_TIM20_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM20_STOP))
+#define __HAL_UNFREEZE_TIM20_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM20_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM20_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_HRTIM1_STOP)
+#define __HAL_FREEZE_HRTIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_HRTIM1_STOP))
+#define __HAL_UNFREEZE_HRTIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_HRTIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_HRTIM1_STOP */
+/**
+ * @}
+ */
+
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_2)
+#define __HAL_SYSCFG_FMC_BANK() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_2); \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_MEM_MODE_2 */
+/**
+ * @}
+ */
+
+/** @defgroup Encoder_Mode Encoder Mode
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_ENCODER_MODE)
+/** @brief No Encoder mode
+ */
+#define __HAL_REMAPENCODER_NONE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE))
+#endif /* SYSCFG_CFGR1_ENCODER_MODE */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0)
+/** @brief Encoder mode : TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM2() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_0; \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM3() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_1; \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0) && defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 (STM32F303xB/C and STM32F358xx devices)
+ */
+#define __HAL_REMAPENCODER_TIM4() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_ENCODER_MODE_0 | SYSCFG_CFGR1_ENCODER_MODE_1); \
+ }while(0U)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 && SYSCFG_CFGR1_ENCODER_MODE_1 */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Remap_Enable DMA Remap Enable
+ * @{
+ */
+#if defined(SYSCFG_CFGR3_DMA_RMP) && defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__DMA_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__DMA_REMAP__))); \
+ }while(0U)
+#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__DMA_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__DMA_REMAP__))); \
+ }while(0U)
+#elif defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0U)
+#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0U)
+#endif /* SYSCFG_CFGR3_DMA_RMP || SYSCFG_CFGR1_DMA_RMP */
+/**
+ * @}
+ */
+
+/** @defgroup FastModePlus_GPIO Fast-mode Plus on GPIO
+ * @{
+ */
+/** @brief Fast-mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO values.
+ * That you can find above these macros.
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+ SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+ }while(0U)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+ CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+ }while(0U)
+/**
+ * @}
+ */
+
+/** @defgroup Floating_Point_Unit_Interrupts_Enable Floating Point Unit Interrupts Enable
+ * @{
+ */
+/** @brief SYSCFG interrupt enable/disable macros
+ * @param __INTERRUPT__ This parameter can be a value of @ref HAL_SYSCFG_Interrupts
+ */
+#define __HAL_SYSCFG_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 |= (__INTERRUPT__); \
+ }while(0U)
+
+#define __HAL_SYSCFG_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 &= ~(__INTERRUPT__); \
+ }while(0U)
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_USB_IT_RMP)
+/** @defgroup USB_Interrupt_Remap USB Interrupt Remap
+ * @{
+ */
+/** @brief USB interrupt remapping enable/disable macros
+ */
+#define __HAL_REMAPINTERRUPT_USB_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_USB_IT_RMP))
+#define __HAL_REMAPINTERRUPT_USB_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_USB_IT_RMP))
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_USB_IT_RMP */
+
+#if defined(SYSCFG_CFGR1_VBAT)
+/** @defgroup VBAT_Monitoring_Enable VBAT Monitoring Enable
+ * @{
+ */
+/** @brief SYSCFG interrupt enable/disable macros
+ */
+#define __HAL_SYSCFG_VBAT_MONITORING_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_VBAT))
+#define __HAL_SYSCFG_VBAT_MONITORING_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_VBAT))
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_VBAT */
+
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+ * @{
+ */
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+/** @defgroup Trigger_Remapping_Enable Trigger Remapping Enable
+ * @{
+ */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__ This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__TRIGGER_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__))); \
+ }while(0U)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__TRIGGER_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__))); \
+ }while(0U)
+#else
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__ This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__)); \
+ }while(0U)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__)); \
+ }while(0U)
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+/** @defgroup ADC_Trigger_Remapping_Enable ADC Trigger Remapping Enable
+ * @{
+ */
+/** @brief ADC trigger remapping enable/disable macros
+ * @param __ADCTRIGGER_REMAP__ This parameter can be a value of @ref HAL_ADC_Trigger_Remapping
+ */
+#define __HAL_REMAPADCTRIGGER_ENABLE(__ADCTRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPADCTRIGGER((__ADCTRIGGER_REMAP__))); \
+ (SYSCFG->CFGR4 |= (__ADCTRIGGER_REMAP__)); \
+ }while(0U)
+#define __HAL_REMAPADCTRIGGER_DISABLE(__ADCTRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPADCTRIGGER((__ADCTRIGGER_REMAP__))); \
+ (SYSCFG->CFGR4 &= ~(__ADCTRIGGER_REMAP__)); \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(SYSCFG_CFGR2_BYP_ADDR_PAR)
+/** @defgroup RAM_Parity_Check_Disable RAM Parity Check Disable
+ * @{
+ */
+/**
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (*(__IO uint32_t *) CFGR2_BYPADDRPAR_BB = 0x00000001U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_BYP_ADDR_PAR */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/** @defgroup CCM_RAM_Page_Write_Protection_Enable CCM RAM page write protection enable
+ * @{
+ */
+/** @brief CCM RAM page write protection enable macro
+ * @param __PAGE_WP__ This parameter can be a value of @ref HAL_Page_Write_Protection
+ * @note write protection can only be disabled by a system reset
+ */
+#define __HAL_SYSCFG_SRAM_WRP_ENABLE(__PAGE_WP__) do {assert_param(IS_HAL_SYSCFG_WP_PAGE((__PAGE_WP__))); \
+ SYSCFG->RCR |= (__PAGE_WP__); \
+ }while(0U)
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_cortex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_cortex.h
new file mode 100644
index 00000000..43ff209f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_cortex.h
@@ -0,0 +1,442 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CORTEX_H
+#define __STM32F3xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types CORTEX Exported Types
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+ * @brief MPU Region initialization structure
+ * @{
+ */
+typedef struct
+{
+ uint8_t Enable; /*!< Specifies the status of the region.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
+ uint8_t Number; /*!< Specifies the number of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Number */
+ uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
+ uint8_t Size; /*!< Specifies the size of the region to protect.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Size */
+ uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint8_t TypeExtField; /*!< Specifies the TEX field level.
+ This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
+ uint8_t AccessPermission; /*!< Specifies the region access permission type.
+ This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
+ uint8_t DisableExec; /*!< Specifies the instruction access status.
+ This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
+ uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
+ uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
+ uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
+ This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
+}MPU_Region_InitTypeDef;
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+#define NVIC_PRIORITYGROUP_0 (0x00000007U) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 (0x00000006U) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 (0x00000005U) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 (0x00000004U) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 (0x00000003U) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 (0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK (0x00000004U)
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+ * @{
+ */
+#define MPU_HFNMI_PRIVDEF_NONE (0x00000000U)
+#define MPU_HARDFAULT_NMI (0x00000002U)
+#define MPU_PRIVILEGED_DEFAULT (0x00000004U)
+#define MPU_HFNMI_PRIVDEF (0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+ * @{
+ */
+#define MPU_REGION_ENABLE ((uint8_t)0x01U)
+#define MPU_REGION_DISABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+ * @{
+ */
+#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
+#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+ * @{
+ */
+#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+ * @{
+ */
+#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+ * @{
+ */
+#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
+#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+ * @{
+ */
+#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
+#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
+#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+ * @{
+ */
+#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
+#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
+#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
+#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
+#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
+#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
+#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
+#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
+#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
+#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
+#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
+#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
+#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
+#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
+#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
+#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
+#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
+#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
+#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
+#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
+#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
+#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
+#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
+#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
+#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
+#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
+#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
+#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+ * @{
+ */
+#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
+#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
+#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
+#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
+#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
+#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+ * @{
+ */
+#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
+#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
+#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
+#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
+#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
+#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
+#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
+#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1U)
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
+
+/** @defgroup CORTEX_SysTick_clock_source_Macro_Private CORTEX SysTick clock source
+ * @{
+ */
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+#if (__MPU_PRESENT == 1U)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+ ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+ ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+ ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
+ ((TYPE) == MPU_TEX_LEVEL1) || \
+ ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RW) || \
+ ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+ ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+ ((TYPE) == MPU_REGION_PRIV_RO) || \
+ ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
+ ((NUMBER) == MPU_REGION_NUMBER1) || \
+ ((NUMBER) == MPU_REGION_NUMBER2) || \
+ ((NUMBER) == MPU_REGION_NUMBER3) || \
+ ((NUMBER) == MPU_REGION_NUMBER4) || \
+ ((NUMBER) == MPU_REGION_NUMBER5) || \
+ ((NUMBER) == MPU_REGION_NUMBER6) || \
+ ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
+ ((SIZE) == MPU_REGION_SIZE_64B) || \
+ ((SIZE) == MPU_REGION_SIZE_128B) || \
+ ((SIZE) == MPU_REGION_SIZE_256B) || \
+ ((SIZE) == MPU_REGION_SIZE_512B) || \
+ ((SIZE) == MPU_REGION_SIZE_1KB) || \
+ ((SIZE) == MPU_REGION_SIZE_2KB) || \
+ ((SIZE) == MPU_REGION_SIZE_4KB) || \
+ ((SIZE) == MPU_REGION_SIZE_8KB) || \
+ ((SIZE) == MPU_REGION_SIZE_16KB) || \
+ ((SIZE) == MPU_REGION_SIZE_32KB) || \
+ ((SIZE) == MPU_REGION_SIZE_64KB) || \
+ ((SIZE) == MPU_REGION_SIZE_128KB) || \
+ ((SIZE) == MPU_REGION_SIZE_256KB) || \
+ ((SIZE) == MPU_REGION_SIZE_512KB) || \
+ ((SIZE) == MPU_REGION_SIZE_1MB) || \
+ ((SIZE) == MPU_REGION_SIZE_2MB) || \
+ ((SIZE) == MPU_REGION_SIZE_4MB) || \
+ ((SIZE) == MPU_REGION_SIZE_8MB) || \
+ ((SIZE) == MPU_REGION_SIZE_16MB) || \
+ ((SIZE) == MPU_REGION_SIZE_32MB) || \
+ ((SIZE) == MPU_REGION_SIZE_64MB) || \
+ ((SIZE) == MPU_REGION_SIZE_128MB) || \
+ ((SIZE) == MPU_REGION_SIZE_256MB) || \
+ ((SIZE) == MPU_REGION_SIZE_512MB) || \
+ ((SIZE) == MPU_REGION_SIZE_1GB) || \
+ ((SIZE) == MPU_REGION_SIZE_2GB) || \
+ ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Functions CORTEX Private Functions
+ * @brief CORTEX private functions
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+
+void HAL_MPU_Disable(void);
+void HAL_MPU_Enable(uint32_t MPU_Control);
+
+#endif /* __MPU_PRESENT */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_def.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_def.h
new file mode 100644
index 00000000..3a13224b
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_def.h
@@ -0,0 +1,180 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_def.h
+ * @author MCD Application Team
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DEF
+#define __STM32F3xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+#if defined USE_LEGACY
+#include "Legacy/stm32_hal_legacy.h"
+#endif
+#include
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0U)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__ specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0U)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0U)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F3xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma.h
new file mode 100644
index 00000000..4120bde8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma.h
@@ -0,0 +1,470 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_H
+#define __STM32F3xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+} DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03 /*!< DMA timeout state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01 /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief HAL DMA Callback ID structure definition
+ */
+typedef enum
+{
+ HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
+ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
+ HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
+ HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
+ HAL_DMA_XFER_ALL_CB_ID = 0x04 /*!< All */
+}HAL_DMA_CallbackIDTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+ DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
+
+ uint32_t ChannelIndex; /*!< DMA Channel Index */
+} DMA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */
+#define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */
+#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @{
+ */
+#define DMA_NORMAL (0x00000000U) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @{
+ */
+#define DMA_PRIORITY_LOW (0x00000000U) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @{
+ */
+#define DMA_FLAG_GL1 (0x00000001U)
+#define DMA_FLAG_TC1 (0x00000002U)
+#define DMA_FLAG_HT1 (0x00000004U)
+#define DMA_FLAG_TE1 (0x00000008U)
+#define DMA_FLAG_GL2 (0x00000010U)
+#define DMA_FLAG_TC2 (0x00000020U)
+#define DMA_FLAG_HT2 (0x00000040U)
+#define DMA_FLAG_TE2 (0x00000080U)
+#define DMA_FLAG_GL3 (0x00000100U)
+#define DMA_FLAG_TC3 (0x00000200U)
+#define DMA_FLAG_HT3 (0x00000400U)
+#define DMA_FLAG_TE3 (0x00000800U)
+#define DMA_FLAG_GL4 (0x00001000U)
+#define DMA_FLAG_TC4 (0x00002000U)
+#define DMA_FLAG_HT4 (0x00004000U)
+#define DMA_FLAG_TE4 (0x00008000U)
+#define DMA_FLAG_GL5 (0x00010000U)
+#define DMA_FLAG_TC5 (0x00020000U)
+#define DMA_FLAG_HT5 (0x00040000U)
+#define DMA_FLAG_TE5 (0x00080000U)
+#define DMA_FLAG_GL6 (0x00100000U)
+#define DMA_FLAG_TC6 (0x00200000U)
+#define DMA_FLAG_HT6 (0x00400000U)
+#define DMA_FLAG_TE6 (0x00800000U)
+#define DMA_FLAG_GL7 (0x01000000U)
+#define DMA_FLAG_TC7 (0x02000000U)
+#define DMA_FLAG_HT7 (0x04000000U)
+#define DMA_FLAG_TE7 (0x08000000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__ DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Channelx transfer.
+ * @param __HANDLE__ DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Channel transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extended module */
+#include "stm32f3xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Input and Output operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+ * @brief DMA private macros
+ * @{
+ */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma_ex.h
new file mode 100644
index 00000000..c1cec1f5
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_dma_ex.h
@@ -0,0 +1,290 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_EX_H
+#define __STM32F3xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
+ * @{
+ */
+/* Interrupt & Flag management */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
+ DMA_FLAG_GL5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+/**
+ * @}
+ */
+
+#else /* STM32F301x8_STM32F302x8_STM32F318xx_STM32F303x8_STM32F334x8_STM32F328xx Product devices */
+/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices
+ * @{
+ */
+
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ DMA_FLAG_GL7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+/**
+ * @}
+ */
+
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash.h
new file mode 100644
index 00000000..234e82c1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash.h
@@ -0,0 +1,397 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash.h
+ * @author MCD Application Team
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_H
+#define __STM32F3xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @addtogroup FLASH_Private_Constants
+ * @{
+ */
+#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Private_Macros
+ * @{
+ */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+ ((__LATENCY__) == FLASH_LATENCY_1) || \
+ ((__LATENCY__) == FLASH_LATENCY_2))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0U,
+ FLASH_PROC_PAGEERASE = 1U,
+ FLASH_PROC_MASSERASE = 2U,
+ FLASH_PROC_PROGRAMHALFWORD = 3U,
+ FLASH_PROC_PROGRAMWORD = 4U,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5U
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
+
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error_Codes */
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
+ * @{
+ */
+
+#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */
+#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */
+#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!ACR |= FLASH_ACR_HLFCYA)
+
+/**
+ * @brief Disable the FLASH half cycle access.
+ * @retval None
+ */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_EM_Latency FLASH Latency
+ * @brief macros to handle FLASH Latency
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__ FLASH Latency
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle
+ * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle
+ * @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle
+ * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle
+ * @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles
+ */
+#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ * @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt FLASH Interrupts
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+ * @arg @ref FLASH_IT_ERR Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+ * @arg @ref FLASH_IT_ERR Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__ specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_FLAG_BSY FLASH Busy flag
+ * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
+ * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
+ * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__ specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
+ * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
+ * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extended module */
+#include "stm32f3xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash_ex.h
new file mode 100644
index 00000000..48bb860b
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_flash_ex.h
@@ -0,0 +1,498 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @brief Header file of Flash HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_EX_H
+#define __STM32F3xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Private_Constants
+ * @{
+ */
+
+#define FLASH_SIZE_DATA_REGISTER (0x1FFFF7CCU)
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Private_Macros
+ * @{
+ */
+#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+
+
+#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
+#define IS_OB_SDACD_VDD_MONITOR(VDD_MONITOR) (((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_SET) || \
+ ((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_RESET))
+#endif /* FLASH_OBR_SDADC12_VDD_MONITOR */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \
+ ((ADDRESS) <= 0x0803FFFFU) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \
+ ((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU))))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= 0x0807FFFFU))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \
+ ((ADDRESS) <= 0x0800FFFFU) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \
+ ((ADDRESS) <= 0x08007FFFU) : ((ADDRESS) <= 0x08003FFFU))))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0803FFFFU) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0801FFFFU) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0800FFFFU)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0807FFFFU)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x0800FFFFU) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x08007FFFU) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1U <= 0x08003FFFU)))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
+ * @{
+ */
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY / SDADC12_VDD_MONITOR
+ This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
+ @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring,
+ @ref FLASHEx_OB_RAM_Parity_Check_Enable.
+ @if STM32F373xC
+ And @ref FLASHEx_OB_SDADC12_VDD_MONITOR (only for STM32F373xC & STM32F378xx devices)
+ @endif
+ @if STM32F378xx
+ And @ref FLASHEx_OB_SDADC12_VDD_MONITOR (only for STM32F373xC & STM32F378xx devices)
+ @endif
+ */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
+ This parameter can be a value of @ref FLASHEx_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
+} FLASH_OBProgramInitTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
+ * @{
+ */
+#define FLASH_PAGE_SIZE 0x800
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_PAGES (0x00U) /*!© COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_H
+#define __STM32F3xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0U,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+/** @defgroup GPIO_pins GPIO pins
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode GPIO mode
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
+#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
+#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed GPIO speed
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull GPIO pull
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Check whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__ specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clear the EXTI's line pending flags.
+ * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Check whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clear the EXTI's line pending bits.
+ * @param __EXTI_LINE__ specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(__PIN__) ((((__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
+ (((__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
+
+#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
+ ((__MODE__) == GPIO_MODE_AF_PP) ||\
+ ((__MODE__) == GPIO_MODE_AF_OD) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_IT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_ANALOG))
+
+#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
+ ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
+ ((__SPEED__) == GPIO_SPEED_FREQ_HIGH))
+
+#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
+ ((__PULL__) == GPIO_PULLUP) || \
+ ((__PULL__) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extended module */
+#include "stm32f3xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_gpio_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_gpio_ex.h
new file mode 100644
index 00000000..3b6ee044
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_gpio_ex.h
@@ -0,0 +1,1538 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_EX_H
+#define __STM32F3xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @brief GPIO Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
+ * @{
+ */
+
+#if defined (STM32F302xC)
+/*---------------------------------- STM32F302xC ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xC */
+
+#if defined (STM32F303xC)
+/*---------------------------------- STM32F303xC ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303xC */
+
+#if defined (STM32F303xE)
+/*---------------------------------- STM32F303xE ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM20 ((uint8_t)0x02U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM20 ((uint8_t)0x03U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_TIM20 ((uint8_t)0x06U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xCU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303xE */
+
+#if defined (STM32F302xE)
+/*---------------------------------- STM32F302xE ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xCU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xE */
+
+#if defined (STM32F398xx)
+/*---------------------------------- STM32F398xx ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM20 ((uint8_t)0x02U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM20 ((uint8_t)0x03U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_TIM20 ((uint8_t)0x06U) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xCU) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F398xx */
+
+#if defined (STM32F358xx)
+/*---------------------------------- STM32F358xx -------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02U) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03U) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05U) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05U) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05U) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05U) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06U) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07U) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08U) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08U) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08U) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08U) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09U) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xAU) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0BU) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xCU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F358xx */
+
+#if defined (STM32F373xC)
+/*---------------------------------- STM32F373xC--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02U) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06U) /* CEC Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xAU) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0BU) /* TIM19 Alternate Function mapping */
+
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0EU) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0BU) || ((AF) == (uint8_t)0x0EU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F373xC */
+
+
+#if defined (STM32F378xx)
+/*---------------------------------------- STM32F378xx--------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02U) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06U) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07U) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08U) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08U) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xAU) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xAU) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0BU) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0BU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F378xx */
+
+#if defined (STM32F303x8)
+/*---------------------------------- STM32F303x8--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0DU) /* OPAMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0DU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303x8 */
+
+#if defined (STM32F334x8) || defined (STM32F328xx)
+/*---------------------------------- STM32F334x8/STM32F328xx -------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_HRTIM1 ((uint8_t)0x03U) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xAU) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_HRTIM1 ((uint8_t)0x0CU) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0DU) /* OPAMP2 Alternate Function mapping */
+#define GPIO_AF13_HRTIM1 ((uint8_t)0x0DU) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0DU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F334x8 || STM32F328xx */
+
+#if defined (STM32F301x8) || defined (STM32F318xx)
+/*---------------------------------- STM32F301x8 / STM32F318xx ------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined (STM32F302x8)
+/*---------------------------------- STM32F302x8------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00U) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01U) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04U) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04U) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05U) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06U) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06U) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07U) /* GPCOMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08U) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08U) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08U) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08U) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09U) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09U) /* TIM15 Alternate Function mapping */
+#define GPIO_AF9_CAN ((uint8_t)0x09U) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xAU) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xAU) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0BU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0CU) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0CU) || ((AF) == (uint8_t)0x0FU))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302x8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index
+* @{
+ */
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U : 5U)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U : 7U)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c.h
new file mode 100644
index 00000000..4e349739
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c.h
@@ -0,0 +1,708 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_H
+#define __STM32F3xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :\n
+ * b7-b6 Error information\n
+ * 00 : No Error\n
+ * 01 : Abort (Abort user request on going)\n
+ * 10 : Timeout\n
+ * 11 : Error\n
+ * b5 IP initilisation status\n
+ * 0 : Reset (IP not initialized)\n
+ * 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)\n
+ * b4 (not used)\n
+ * x : Should be set to 0\n
+ * b3\n
+ * 0 : Ready or Busy (No Listen mode ongoing)\n
+ * 1 : Listen (IP in Address Listen Mode)\n
+ * b2 Intrinsic process state\n
+ * 0 : Ready\n
+ * 1 : Busy (IP busy with some configuration or internal operations)\n
+ * b1 Rx state\n
+ * 0 : Ready (no Rx operation ongoing)\n
+ * 1 : Busy (Rx operation ongoing)\n
+ * b0 Tx state\n
+ * 0 : Ready (no Tx operation ongoing)\n
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :\n
+ * b7 (not used)\n
+ * x : Should be set to 0\n
+ * b6\n
+ * 0 : None\n
+ * 1 : Memory (HAL I2C communication is in Memory Mode)\n
+ * b5\n
+ * 0 : None\n
+ * 1 : Slave (HAL I2C communication is in Slave Mode)\n
+ * b4\n
+ * 0 : None\n
+ * 1 : Master (HAL I2C communication is in Master Mode)\n
+ * b3-b2-b1-b0 (not used)\n
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+ * @brief I2C Error Code definition
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
+#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+typedef struct __I2C_HandleTypeDef
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
+ be a value of @ref I2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state */
+
+ HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
+} I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+ * @{
+ */
+#define I2C_OA2_NOMASK ((uint8_t)0x00U)
+#define I2C_OA2_MASK01 ((uint8_t)0x01U)
+#define I2C_OA2_MASK02 ((uint8_t)0x02U)
+#define I2C_OA2_MASK03 ((uint8_t)0x03U)
+#define I2C_OA2_MASK04 ((uint8_t)0x04U)
+#define I2C_OA2_MASK05 ((uint8_t)0x05U)
+#define I2C_OA2_MASK06 ((uint8_t)0x06U)
+#define I2C_OA2_MASK07 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE (0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+ * @{
+ */
+#define I2C_DIRECTION_TRANSMIT (0x00000000U)
+#define I2C_DIRECTION_RECEIVE (0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+ * @{
+ */
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+ * @{
+ */
+#define I2C_NO_STARTSTOP (0x00000000U)
+#define I2C_GENERATE_STOP I2C_CR2_STOP
+#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE I2C_CR2_START
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified I2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified I2C flag is set or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref I2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref I2C_FLAG_TCR Transfer complete reload
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ * @arg @ref I2C_FLAG_BUSY Bus busy
+ * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Disable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f3xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+ * @{
+ */
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME))
+
+#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)
+#define I2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
+#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f3xx_hal_i2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c_ex.h
new file mode 100644
index 00000000..7bbb7ffd
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_i2c_ex.h
@@ -0,0 +1,179 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_EX_H
+#define __STM32F3xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE 0x00000000U
+#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+ * @{
+ */
+#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#if defined(SYSCFG_CFGR1_I2C2_FMP)
+#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
+#endif
+#if defined(SYSCFG_CFGR1_I2C3_FMP)
+#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \
+ ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f3xx_hal_i2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr.h
new file mode 100644
index 00000000..e8531c41
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr.h
@@ -0,0 +1,235 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_H
+#define __STM32F3xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+
+#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1) /*!< Wakeup pin 1U */
+#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2) /*!< Wakeup pin 2U */
+#define PWR_WAKEUP_PIN3 ((uint32_t)PWR_CSR_EWUP3) /*!< Wakeup pin 3U */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON (0x00000000U) /*!< Voltage regulator on during STOP mode */
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS /*!< Voltage regulator in low-power mode during STOP mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U) /*!< Wait For Interruption instruction to enter SLEEP mode */
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U) /*!< Wait For Event instruction to enter SLEEP mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U) /*!< Wait For Interruption instruction to enter STOP mode */
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U) /*!< Wait For Event instruction to enter STOP mode */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF /*!< Wakeup event from wakeup pin or RTC alarm */
+#define PWR_FLAG_SB PWR_CSR_SBF /*!< Standby flag */
+#define PWR_FLAG_PVDO PWR_CSR_PVDO /*!< Power Voltage Detector output flag */
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF /*!< VREFINT reference voltage ready */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3))
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extended module */
+#include "stm32f3xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr_ex.h
new file mode 100644
index 00000000..da99cd58
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_pwr_ex.h
@@ -0,0 +1,338 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_EX_H
+#define __STM32F3xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Types PWR Extended Exported Types
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/** @defgroup PWREx_PVD_detection_level PWR Extended PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 /*!< PVD threshold around 2.2 V */
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 /*!< PVD threshold around 2.3 V */
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 /*!< PVD threshold around 2.4 V */
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 /*!< PVD threshold around 2.5 V */
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 /*!< PVD threshold around 2.6 V */
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 /*!< PVD threshold around 2.7 V */
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 /*!< PVD threshold around 2.8 V */
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 /*!< PVD threshold around 2.9 V */
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode PWR Extended PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
+#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+#define PWR_EXTI_LINE_PVD EXTI_IMR_MR16 /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup PWREx_SDADC_ANALOGx PWR Extended SDADC ANALOGx
+ * @{
+ */
+#define PWR_SDADC_ANALOG1 ((uint32_t)PWR_CR_ENSD1) /*!< Enable SDADC1 */
+#define PWR_SDADC_ANALOG2 ((uint32_t)PWR_CR_ENSD2) /*!< Enable SDADC2 */
+#define PWR_SDADC_ANALOG3 ((uint32_t)PWR_CR_ENSD3) /*!< Enable SDADC3 */
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWR Extended Exported Macros
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/**
+ * @brief Enable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief PVD EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_PWR_SDADC_ANALOG(SDADC) (((SDADC) == PWR_SDADC_ANALOG1) || \
+ ((SDADC) == PWR_SDADC_ANALOG2) || \
+ ((SDADC) == PWR_SDADC_ANALOG3))
+#endif /* STM32F373xC || STM32F378xx */
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+ * @{
+ */
+/* Peripheral Extended control functions **************************************/
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+void HAL_PWREx_EnableSDADC(uint32_t Analogx);
+void HAL_PWREx_DisableSDADC(uint32_t Analogx);
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc.h
new file mode 100644
index 00000000..decab31f
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc.h
@@ -0,0 +1,1756 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_H
+#define __STM32F3xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @addtogroup RCC_Private_Constants
+ * @{
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
+
+/* Disable Backup domain write protection state change timeout */
+#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */
+/* LSE state change timeout */
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Register_Offset Register offsets
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+#define RCC_CR_OFFSET 0x00
+#define RCC_CFGR_OFFSET 0x04
+#define RCC_CIR_OFFSET 0x08
+#define RCC_BDCR_OFFSET 0x20
+#define RCC_CSR_OFFSET 0x24
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET)
+#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET)
+#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET)
+#define RCC_BDCR_OFFSET_BB (RCC_OFFSET + RCC_BDCR_OFFSET)
+#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET)
+
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_HSION_BIT_NUMBER POSITION_VAL(RCC_CR_HSION)
+#define RCC_CR_HSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSION_BIT_NUMBER * 4U)))
+/* Alias word address of HSEON bit */
+#define RCC_HSEON_BIT_NUMBER POSITION_VAL(RCC_CR_HSEON)
+#define RCC_CR_HSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_HSEON_BIT_NUMBER * 4U)))
+/* Alias word address of CSSON bit */
+#define RCC_CSSON_BIT_NUMBER POSITION_VAL(RCC_CR_CSSON)
+#define RCC_CR_CSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_CSSON_BIT_NUMBER * 4U)))
+/* Alias word address of PLLON bit */
+#define RCC_PLLON_BIT_NUMBER POSITION_VAL(RCC_CR_PLLON)
+#define RCC_CR_PLLON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32U) + (RCC_PLLON_BIT_NUMBER * 4U)))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_LSION_BIT_NUMBER POSITION_VAL(RCC_CSR_LSION)
+#define RCC_CSR_LSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_LSION_BIT_NUMBER * 4U)))
+
+/* Alias word address of RMVF bit */
+#define RCC_RMVF_BIT_NUMBER POSITION_VAL(RCC_CSR_RMVF)
+#define RCC_CSR_RMVF_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32U) + (RCC_RMVF_BIT_NUMBER * 4U)))
+
+/* --- BDCR Registers ---*/
+/* Alias word address of LSEON bit */
+#define RCC_LSEON_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEON)
+#define RCC_BDCR_LSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEON_BIT_NUMBER * 4U)))
+
+/* Alias word address of LSEON bit */
+#define RCC_LSEBYP_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEBYP)
+#define RCC_BDCR_LSEBYP_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_LSEBYP_BIT_NUMBER * 4U)))
+
+/* Alias word address of RTCEN bit */
+#define RCC_RTCEN_BIT_NUMBER POSITION_VAL(RCC_BDCR_RTCEN)
+#define RCC_BDCR_RTCEN_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U)))
+
+/* Alias word address of BDRST bit */
+#define RCC_BDRST_BIT_NUMBER POSITION_VAL(RCC_BDCR_BDRST)
+#define RCC_BDCR_BDRST_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32U) + (RCC_BDRST_BIT_NUMBER * 4U)))
+
+/**
+ * @}
+ */
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U))
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U))
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U))
+
+/* Defines used for Flags */
+#define CR_REG_INDEX ((uint8_t)1U)
+#define BDCR_REG_INDEX ((uint8_t)2U)
+#define CSR_REG_INDEX ((uint8_t)3U)
+#define CFGR_REG_INDEX ((uint8_t)4U)
+
+#define RCC_FLAG_MASK ((uint8_t)0x1FU)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_PLLSOURCE_HSE))
+#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
+#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
+ ((__HSE__) == RCC_HSE_BYPASS))
+#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
+ ((__LSE__) == RCC_LSE_BYPASS))
+#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
+#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU)
+#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
+#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \
+ ((__PLL__) == RCC_PLL_ON))
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16))
+#else
+#define IS_RCC_PLL_DIV(__DIV__) (((__DIV__) == RCC_PLL_DIV2) || \
+ ((__DIV__) == RCC_PLL_DIV3) || ((__DIV__) == RCC_PLL_DIV4))
+#endif
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+#define IS_RCC_HSE_PREDIV(DIV) (((DIV) == RCC_HSE_PREDIV_DIV1) || ((DIV) == RCC_HSE_PREDIV_DIV2) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV3) || ((DIV) == RCC_HSE_PREDIV_DIV4) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV5) || ((DIV) == RCC_HSE_PREDIV_DIV6) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV7) || ((DIV) == RCC_HSE_PREDIV_DIV8) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV9) || ((DIV) == RCC_HSE_PREDIV_DIV10) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV11) || ((DIV) == RCC_HSE_PREDIV_DIV12) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV13) || ((DIV) == RCC_HSE_PREDIV_DIV14) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV15) || ((DIV) == RCC_HSE_PREDIV_DIV16))
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \
+ ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
+ ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
+ ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
+ ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \
+ ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \
+ ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \
+ ((__MUL__) == RCC_PLL_MUL16))
+#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2))
+#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
+#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV512))
+#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
+ ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
+ ((__PCLK__) == RCC_HCLK_DIV16))
+#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO)
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
+#if defined(RCC_CFGR3_USART2SW)
+#define IS_RCC_USART2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI))
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+#define IS_RCC_USART3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI))
+#endif /* RCC_CFGR3_USART3SW */
+#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
+
+#endif
+} RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ uint32_t HSEPredivValue; /*!< The HSE predivision factor value.
+ This parameter can be a value of @ref RCC_PLL_HSE_Prediv_Factor */
+
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+} RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+} RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< HSI clock selected as PLL entry clock source */
+#endif /* RCC_CFGR_PLLSRC_HSI_PREDIV */
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2 /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE (0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE (0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI (0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE (0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI (0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */
+#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */
+#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */
+#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */
+#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */
+#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
+
+#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */
+#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */
+#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */
+#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */
+#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */
+#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */
+#define RCC_CLOCKTYPE_PCLK2 (0x00000008U) /*!< PCLK2 to configure */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NO_CLK RCC_BDCR_RTCSEL_NOCLOCK /*!< No clock */
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+/**
+ * @}
+ */
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
+ * @{
+ */
+
+#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+/**
+ * @}
+ */
+
+#endif
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+/** @defgroup RCC_PLL_HSE_Prediv_Factor RCC PLL HSE Prediv Factor
+ * @{
+ */
+
+#define RCC_HSE_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+#if defined(RCC_CFGR3_USART2SW)
+/** @defgroup RCC_USART2_Clock_Source RCC USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+/** @defgroup RCC_USART3_Clock_Source RCC USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR3_USART3SW */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+/**
+ * @}
+ */
+/** @defgroup RCC_MCO_Index MCO Index
+ * @{
+ */
+#define RCC_MCO1 (0x00000000U)
+#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt Interrupts
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */
+#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */
+#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */
+#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */
+#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */
+#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag Flags
+ * Elements values convention: XXXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XXX : Register index
+ * - 001: CR register
+ * - 010: BDCR register
+ * - 011: CSR register
+ * - 100: CFGR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< Internal High Speed clock ready flag */
+#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_HSERDY))) /*!< External High Speed clock ready flag */
+#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL clock ready flag */
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< Internal Low Speed oscillator Ready */
+#if defined(RCC_CSR_V18PWRRSTF)
+#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_V18PWRRSTF)))
+#endif
+#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_OBLRSTF))) /*!< Options bytes loading reset flag */
+#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */
+#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_PORRSTF))) /*!< POR/PDR reset flag */
+#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */
+#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */
+#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */
+#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | POSITION_VAL(RCC_BDCR_LSERDY))) /*!< External Low Speed oscillator Ready */
+
+/* Flags in the CFGR register */
+#if defined(RCC_CFGR_MCOF)
+#define RCC_FLAG_MCO ((uint8_t)((CFGR_REG_INDEX << 5U) | POSITION_VAL(RCC_CFGR_MCOF))) /*!< Microcontroller Clock Output Flag */
+#endif /* RCC_CFGR_MCOF */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_FLITF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TSC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+#define __HAL_RCC_TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DAC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+#define __HAL_RCC_DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM16_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET)
+#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET)
+#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET)
+#define __HAL_RCC_TSC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET)
+
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET)
+#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET)
+#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET)
+#define __HAL_RCC_TSC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+#define __HAL_RCC_DAC1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+#define __HAL_RCC_DAC1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief EGet the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
+#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET)
+#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
+#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET)
+#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+#define __HAL_RCC_TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+#define __HAL_RCC_TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+#define __HAL_RCC_DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC1RST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U)
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+#define __HAL_RCC_DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \
+ (MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << POSITION_VAL(RCC_CR_HSITRIM)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
+
+/** @brief Macro to disable the Internal Low Speed oscillator (LSI).
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__ specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg @ref RCC_HSE_ON turn ON the HSE oscillator
+ * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) \
+ do{ \
+ if ((__STATE__) == RCC_HSE_ON) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else if ((__STATE__) == RCC_HSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_HSE_BYPASS) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ }while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__ specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg @ref RCC_LSE_ON turn ON the LSE oscillator.
+ * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ do{ \
+ if ((__STATE__) == RCC_LSE_ON) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else if ((__STATE__) == RCC_LSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_LSE_BYPASS) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ }while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ @if STM32F302xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F358xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F302xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F398xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F373xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F378xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F301x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F302x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F318xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F303x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F334x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F328xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ @if STM32F302xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F358xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F302xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F303xE
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F398xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F373xC
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F378xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ @endif
+ @if STM32F301x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F302x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F318xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F303x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F334x8
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ @if STM32F328xx
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ @endif
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+
+#if defined(RCC_CFGR3_USART2SW)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+#endif /* RCC_CFGR3_USART2SW */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
+
+/** @brief Macro to disable the main PLL.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ */
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
+
+
+/** @brief Get oscillator clock selected as PLL input clock
+ * @retval The clock source used for PLL entry. The returned value can be one
+ * of the following:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL input clock
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __SYSCLKSOURCE__ specifies the system clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source.
+ * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source.
+ * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1
+ * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2
+ * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4
+ * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8
+ * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16
+ * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32
+ * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64
+ * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128
+ */
+#else
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source
+ */
+#endif
+#if defined(RCC_CFGR_MCOPRE)
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+#else
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__))
+
+#endif
+
+/**
+ * @}
+ */
+
+ /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it cannot be changed unless the
+ * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by
+ * a Power On Reset (POR).
+ *
+ * @param __RTC_CLKSOURCE__ specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
+
+/** @brief Macro to enable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
+
+/** @brief Macro to disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macro to force the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_BDCR register.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
+
+/** @brief Macros to release the Backup domain reset.
+ */
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt.
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt.
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+ * @arg @ref RCC_IT_CSS Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+ * @arg @ref RCC_IT_CSS Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags.
+ * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)RCC_CSR_RMVF_BB = ENABLE)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready.
+ * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready.
+ * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready.
+ * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready.
+ * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready.
+ * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset
+ * @arg @ref RCC_FLAG_PINRST Pin reset.
+ * @arg @ref RCC_FLAG_PORRST POR/PDR reset.
+ * @arg @ref RCC_FLAG_SFTRST Software reset.
+ * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset.
+ * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset.
+ * @arg @ref RCC_FLAG_LPWRRST Low Power reset.
+ @if defined(STM32F301x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F302x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F302xC)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ * @arg @ref RCC_FLAG_MCO Microcontroller Clock Output
+ @endif
+ @if defined(STM32F302xE)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F303x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F303xC)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ * @arg @ref RCC_FLAG_MCO Microcontroller Clock Output
+ @endif
+ @if defined(STM32F303xE)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F334x8)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ @if defined(STM32F358xx)
+ * @arg @ref RCC_FLAG_MCO Microcontroller Clock Output
+ @endif
+ @if defined(STM32F373xC)
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \
+ (((__FLAG__) >> 5U) == BDCR_REG_INDEX)? RCC->BDCR : \
+ (((__FLAG__) >> 5U) == CFGR_REG_INDEX)? RCC->CFGR : \
+ RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f3xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc_ex.h
new file mode 100644
index 00000000..81a4da7a
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_rcc_ex.h
@@ -0,0 +1,3843 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_EX_H
+#define __STM32F3xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/** @addtogroup RCCEx_Private_Macros
+ * @{
+ */
+
+#if defined(RCC_CFGR_PLLNODIV)
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2))
+#else
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2))
+#endif /* RCC_CFGR_PLLNODIV */
+
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F301x8 || STM32F318xx */
+#if defined(STM32F302x8)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302x8 */
+#if defined(STM32F302xC)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F302xC */
+#if defined(STM32F303xC)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F303xC */
+#if defined(STM32F302xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_TIM2 | RCC_PERIPHCLK_TIM34 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302xE */
+#if defined(STM32F303xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_TIM2 | RCC_PERIPHCLK_TIM34 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_TIM20))
+#endif /* STM32F303xE */
+#if defined(STM32F398xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM2 | \
+ RCC_PERIPHCLK_TIM34 | RCC_PERIPHCLK_TIM15 | \
+ RCC_PERIPHCLK_TIM16 | RCC_PERIPHCLK_TIM17 | \
+ RCC_PERIPHCLK_TIM20))
+#endif /* STM32F398xx */
+#if defined(STM32F358xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F358xx */
+#if defined(STM32F303x8)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F303x8 */
+#if defined(STM32F334x8)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_HRTIM1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F334x8 */
+#if defined(STM32F328xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F328xx */
+#if defined(STM32F373xC)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F373xC */
+#if defined(STM32F378xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC1PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PLLCLK_OFF) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV256))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#define IS_RCC_TIM2CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM2CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM2CLK_PLLCLK))
+#define IS_RCC_TIM3CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM34CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM34CLK_PLLCLK))
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_RCC_TIM20CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM20CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM20CLK_PLLCLK))
+#endif /* STM32F303xE || STM32F398xx */
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define IS_RCC_ADC34PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC34PLLCLK_OFF) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV256))
+#define IS_RCC_TIM8CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM8CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM8CLK_PLLCLK))
+#endif /* STM32F303xC || STM32F303xE || STM32F398xx || STM32F358xx */
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+#if defined(STM32F334x8)
+#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_HRTIM1CLK_PLLCLK))
+#endif /* STM32F334x8 */
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+#define IS_RCC_ADC1PCLK2_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PCLK2_DIV2) || ((ADCCLK) == RCC_ADC1PCLK2_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PCLK2_DIV6) || ((ADCCLK) == RCC_ADC1PCLK2_DIV8))
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#define IS_RCC_SDADCSYSCLK_DIV(DIV) (((DIV) == RCC_SDADCSYSCLK_DIV1) || ((DIV) == RCC_SDADCSYSCLK_DIV2) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV4) || ((DIV) == RCC_SDADCSYSCLK_DIV6) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV8) || ((DIV) == RCC_SDADCSYSCLK_DIV10) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV12) || ((DIV) == RCC_SDADCSYSCLK_DIV14) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV16) || ((DIV) == RCC_SDADCSYSCLK_DIV20) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV24) || ((DIV) == RCC_SDADCSYSCLK_DIV28) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV32) || ((DIV) == RCC_SDADCSYSCLK_DIV36) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV40) || ((DIV) == RCC_SDADCSYSCLK_DIV44) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV48))
+#endif /* STM32F373xC || STM32F378xx */
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLL) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLL_DIV1_5))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+#if defined(RCC_CFGR_MCOPRE)
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_4) || ((DIV) == RCC_MCODIV_8) || \
+ ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32) || \
+ ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128))
+#else
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1))
+#endif /* RCC_CFGR_MCOPRE */
+
+#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_HIGH))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xC */
+
+#if defined(STM32F302xE)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xE */
+
+#if defined(STM32F303xE)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t Tim20ClockSelection; /*!< TIM20 clock source
+ This parameter can be a value of @ref RCCEx_TIM20_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xE */
+
+#if defined(STM32F398xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t Tim20ClockSelection; /*!< TIM20 clock source
+ This parameter can be a value of @ref RCCEx_TIM20_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F398xx */
+
+#if defined(STM32F358xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Hrtim1ClockSelection; /*!< HRTIM1 clock source
+ This parameter can be a value of @ref RCCEx_HRTIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCC Extended Exported Constants
+ * @{
+ */
+/** @defgroup RCCEx_MCO_Clock_Source RCC Extended MCO Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE
+#if defined(RCC_CFGR_PLLNODIV)
+#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_PLLNODIV | RCC_CFGR_MCO_PLL)
+#endif /* RCC_CFGR_PLLNODIV */
+#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Extended Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_I2C3 (0x00008000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_TIM15 (0x00040000U)
+#define RCC_PERIPHCLK_TIM16 (0x00080000U)
+#define RCC_PERIPHCLK_TIM17 (0x00100000U)
+
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_I2C3 (0x00008000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+#define RCC_PERIPHCLK_TIM15 (0x00040000U)
+#define RCC_PERIPHCLK_TIM16 (0x00080000U)
+#define RCC_PERIPHCLK_TIM17 (0x00100000U)
+
+
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F303xC */
+
+#if defined(STM32F302xE)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+#define RCC_PERIPHCLK_I2C3 (0x00040000U)
+#define RCC_PERIPHCLK_TIM2 (0x00100000U)
+#define RCC_PERIPHCLK_TIM34 (0x00200000U)
+#define RCC_PERIPHCLK_TIM15 (0x00400000U)
+#define RCC_PERIPHCLK_TIM16 (0x00800000U)
+#define RCC_PERIPHCLK_TIM17 (0x01000000U)
+
+#endif /* STM32F302xE */
+
+#if defined(STM32F303xE)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+#define RCC_PERIPHCLK_I2C3 (0x00040000U)
+#define RCC_PERIPHCLK_TIM2 (0x00100000U)
+#define RCC_PERIPHCLK_TIM34 (0x00200000U)
+#define RCC_PERIPHCLK_TIM15 (0x00400000U)
+#define RCC_PERIPHCLK_TIM16 (0x00800000U)
+#define RCC_PERIPHCLK_TIM17 (0x01000000U)
+#define RCC_PERIPHCLK_TIM20 (0x02000000U)
+
+#endif /* STM32F303xE */
+
+#if defined(STM32F398xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_I2C3 (0x00040000U)
+#define RCC_PERIPHCLK_TIM2 (0x00100000U)
+#define RCC_PERIPHCLK_TIM34 (0x00200000U)
+#define RCC_PERIPHCLK_TIM15 (0x00400000U)
+#define RCC_PERIPHCLK_TIM16 (0x00800000U)
+#define RCC_PERIPHCLK_TIM17 (0x01000000U)
+#define RCC_PERIPHCLK_TIM20 (0x02000000U)
+
+
+#endif /* STM32F398xx */
+
+#if defined(STM32F358xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_UART4 (0x00000008U)
+#define RCC_PERIPHCLK_UART5 (0x00000010U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_ADC34 (0x00000100U)
+#define RCC_PERIPHCLK_I2S (0x00000200U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_TIM8 (0x00002000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_HRTIM1 (0x00004000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_ADC12 (0x00000080U)
+#define RCC_PERIPHCLK_TIM1 (0x00001000U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_SDADC (0x00000800U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_USART3 (0x00000004U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_I2C2 (0x00000040U)
+#define RCC_PERIPHCLK_ADC1 (0x00000080U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_SDADC (0x00000800U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK1
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCC Extended I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source RCC Extended ADC1 Clock Source
+ * @{
+ */
+#define RCC_ADC1PLLCLK_OFF RCC_CFGR2_ADC1PRES_NO
+#define RCC_ADC1PLLCLK_DIV1 RCC_CFGR2_ADC1PRES_DIV1
+#define RCC_ADC1PLLCLK_DIV2 RCC_CFGR2_ADC1PRES_DIV2
+#define RCC_ADC1PLLCLK_DIV4 RCC_CFGR2_ADC1PRES_DIV4
+#define RCC_ADC1PLLCLK_DIV6 RCC_CFGR2_ADC1PRES_DIV6
+#define RCC_ADC1PLLCLK_DIV8 RCC_CFGR2_ADC1PRES_DIV8
+#define RCC_ADC1PLLCLK_DIV10 RCC_CFGR2_ADC1PRES_DIV10
+#define RCC_ADC1PLLCLK_DIV12 RCC_CFGR2_ADC1PRES_DIV12
+#define RCC_ADC1PLLCLK_DIV16 RCC_CFGR2_ADC1PRES_DIV16
+#define RCC_ADC1PLLCLK_DIV32 RCC_CFGR2_ADC1PRES_DIV32
+#define RCC_ADC1PLLCLK_DIV64 RCC_CFGR2_ADC1PRES_DIV64
+#define RCC_ADC1PLLCLK_DIV128 RCC_CFGR2_ADC1PRES_DIV128
+#define RCC_ADC1PLLCLK_DIV256 RCC_CFGR2_ADC1PRES_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source RCC Extended TIM15 Clock Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source RCC Extended TIM16 Clock Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source RCC Extended TIM17 Clock Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK2
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+/**
+ * @}
+ */
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCC Extended UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCC Extended UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK2
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCC Extended I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM2_Clock_Source RCC Extended TIM2 Clock Source
+ * @{
+ */
+#define RCC_TIM2CLK_HCLK RCC_CFGR3_TIM2SW_HCLK
+#define RCC_TIM2CLK_PLLCLK RCC_CFGR3_TIM2SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM34_Clock_Source RCC Extended TIM3 & TIM4 Clock Source
+ * @{
+ */
+#define RCC_TIM34CLK_HCLK RCC_CFGR3_TIM34SW_HCLK
+#define RCC_TIM34CLK_PLLCLK RCC_CFGR3_TIM34SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source RCC Extended TIM15 Clock Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source RCC Extended TIM16 Clock Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source RCC Extended TIM17 Clock Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCC Extended UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCC Extended UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup RCCEx_TIM20_Clock_Source RCC Extended TIM20 Clock Source
+ * @{
+ */
+#define RCC_TIM20CLK_HCLK RCC_CFGR3_TIM20SW_HCLK
+#define RCC_TIM20CLK_PLLCLK RCC_CFGR3_TIM20SW_PLL
+
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_ADC34_Clock_Source RCC Extended ADC34 Clock Source
+ * @{
+ */
+
+/* ADC3 & ADC4 */
+#define RCC_ADC34PLLCLK_OFF RCC_CFGR2_ADCPRE34_NO
+#define RCC_ADC34PLLCLK_DIV1 RCC_CFGR2_ADCPRE34_DIV1
+#define RCC_ADC34PLLCLK_DIV2 RCC_CFGR2_ADCPRE34_DIV2
+#define RCC_ADC34PLLCLK_DIV4 RCC_CFGR2_ADCPRE34_DIV4
+#define RCC_ADC34PLLCLK_DIV6 RCC_CFGR2_ADCPRE34_DIV6
+#define RCC_ADC34PLLCLK_DIV8 RCC_CFGR2_ADCPRE34_DIV8
+#define RCC_ADC34PLLCLK_DIV10 RCC_CFGR2_ADCPRE34_DIV10
+#define RCC_ADC34PLLCLK_DIV12 RCC_CFGR2_ADCPRE34_DIV12
+#define RCC_ADC34PLLCLK_DIV16 RCC_CFGR2_ADCPRE34_DIV16
+#define RCC_ADC34PLLCLK_DIV32 RCC_CFGR2_ADCPRE34_DIV32
+#define RCC_ADC34PLLCLK_DIV64 RCC_CFGR2_ADCPRE34_DIV64
+#define RCC_ADC34PLLCLK_DIV128 RCC_CFGR2_ADCPRE34_DIV128
+#define RCC_ADC34PLLCLK_DIV256 RCC_CFGR2_ADCPRE34_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM8_Clock_Source RCC Extended TIM8 Clock Source
+ * @{
+ */
+#define RCC_TIM8CLK_HCLK RCC_CFGR3_TIM8SW_HCLK
+#define RCC_TIM8CLK_PLLCLK RCC_CFGR3_TIM8SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F303xC || STM32F303xE || STM32F398xx || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK1
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @defgroup RCCEx_HRTIM1_Clock_Source RCC Extended HRTIM1 Clock Source
+ * @{
+ */
+#define RCC_HRTIM1CLK_HCLK RCC_CFGR3_HRTIM1SW_HCLK
+#define RCC_HRTIM1CLK_PLLCLK RCC_CFGR3_HRTIM1SW_PLL
+
+/**
+ * @}
+ */
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK2
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source RCC Extended ADC1 Clock Source
+ * @{
+ */
+
+/* ADC1 */
+#define RCC_ADC1PCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
+#define RCC_ADC1PCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
+#define RCC_ADC1PCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
+#define RCC_ADC1PCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCC Extended CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADC_Clock_Prescaler RCC Extended SDADC Clock Prescaler
+ * @{
+ */
+#define RCC_SDADCSYSCLK_DIV1 RCC_CFGR_SDPRE_DIV1
+#define RCC_SDADCSYSCLK_DIV2 RCC_CFGR_SDPRE_DIV2
+#define RCC_SDADCSYSCLK_DIV4 RCC_CFGR_SDPRE_DIV4
+#define RCC_SDADCSYSCLK_DIV6 RCC_CFGR_SDPRE_DIV6
+#define RCC_SDADCSYSCLK_DIV8 RCC_CFGR_SDPRE_DIV8
+#define RCC_SDADCSYSCLK_DIV10 RCC_CFGR_SDPRE_DIV10
+#define RCC_SDADCSYSCLK_DIV12 RCC_CFGR_SDPRE_DIV12
+#define RCC_SDADCSYSCLK_DIV14 RCC_CFGR_SDPRE_DIV14
+#define RCC_SDADCSYSCLK_DIV16 RCC_CFGR_SDPRE_DIV16
+#define RCC_SDADCSYSCLK_DIV20 RCC_CFGR_SDPRE_DIV20
+#define RCC_SDADCSYSCLK_DIV24 RCC_CFGR_SDPRE_DIV24
+#define RCC_SDADCSYSCLK_DIV28 RCC_CFGR_SDPRE_DIV28
+#define RCC_SDADCSYSCLK_DIV32 RCC_CFGR_SDPRE_DIV32
+#define RCC_SDADCSYSCLK_DIV36 RCC_CFGR_SDPRE_DIV36
+#define RCC_SDADCSYSCLK_DIV40 RCC_CFGR_SDPRE_DIV40
+#define RCC_SDADCSYSCLK_DIV44 RCC_CFGR_SDPRE_DIV44
+#define RCC_SDADCSYSCLK_DIV48 RCC_CFGR_SDPRE_DIV48
+
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+/** @defgroup RCCEx_USB_Clock_Source RCC Extended USB Clock Source
+ * @{
+ */
+
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE_DIV1
+#define RCC_USBCLKSOURCE_PLL_DIV1_5 RCC_CFGR_USBPRE_DIV1_5
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCC Extended MCOx Clock Prescaler
+ * @{
+ */
+#if defined(RCC_CFGR_MCOPRE)
+
+#define RCC_MCODIV_1 (0x00000000U)
+#define RCC_MCODIV_2 (0x10000000U)
+#define RCC_MCODIV_4 (0x20000000U)
+#define RCC_MCODIV_8 (0x30000000U)
+#define RCC_MCODIV_16 (0x40000000U)
+#define RCC_MCODIV_32 (0x50000000U)
+#define RCC_MCODIV_64 (0x60000000U)
+#define RCC_MCODIV_128 (0x70000000U)
+
+#else
+
+#define RCC_MCODIV_1 (0x00000000U)
+
+#endif /* RCC_CFGR_MCOPRE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration
+ * @{
+ */
+
+#define RCC_LSEDRIVE_LOW (0x00000000U) /*!< Xtal mode lower driving capability */
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCC Extended Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_PLL_Configuration RCC Extended PLL Configuration
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+/** @brief Macro to configure the PLL clock source, multiplication and division factors.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
+ * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+ * @param __PLLMUL__ specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
+ do { \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
+ } while(0U)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+/** @brief Macro to configure the PLL clock source and multiplication factor.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
+ * @param __PLLMUL__ specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PLLMUL__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_HSE_Configuration RCC Extended HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__))
+
+/**
+ * @brief Macro to get prediv1 factor for PLL.
+ */
+#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV)
+
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+
+/** @defgroup RCCEx_AHB_Clock_Enable_Disable RCC Extended AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_ADC12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+#define __HAL_RCC_ADC2_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#define __HAL_RCC_ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#define __HAL_RCC_ADC2_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_ADC34_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC34EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC34EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_ADC34_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC34EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_ADC12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ADC12EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+#define __HAL_RCC_ADC2_CLK_ENABLE() __HAL_RCC_ADC12_CLK_ENABLE()
+
+#define __HAL_RCC_ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#define __HAL_RCC_ADC2_CLK_DISABLE() __HAL_RCC_ADC12_CLK_DISABLE()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FMCEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOGEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOHEN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable RCC Extended APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DAC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM18_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM18EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM18EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DAC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DAC2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_TIM18_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM18EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) \
+ || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define __HAL_RCC_USB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable RCC Extended APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HAL_RCC_HRTIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_HRTIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_HRTIM1EN))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM19_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM19EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM19EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SDADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SDADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SDADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_TIM19_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM19EN))
+#define __HAL_RCC_SDADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC1EN))
+#define __HAL_RCC_SDADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC2EN))
+#define __HAL_RCC_SDADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC3EN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_TIM20_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM20EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM20EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM20_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM20EN))
+#endif /* STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Peripheral_Clock_Enable_Disable_Status RCC Extended AHB Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC1EN)) != RESET)
+
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC1EN)) == RESET)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_ADC12_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) != RESET)
+
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_ADC12_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_ADC34_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC34EN)) != RESET)
+
+#define __HAL_RCC_ADC34_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC34EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_ADC12_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) != RESET)
+
+#define __HAL_RCC_ADC12_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ADC12EN)) == RESET)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FMCEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOHEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FMCEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOHEN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable_Status RCC Extended APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_DAC2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) != RESET)
+
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_DAC2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) == RESET)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_TIM18_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM18EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_DAC2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_TIM18_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM18EN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_DAC2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) \
+ || defined(STM32F303xC) || defined(STM32F358xx) \
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
+
+#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CANEN)) != RESET)
+
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CANEN)) == RESET)
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable_Status RCC Extended APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HAL_RCC_HRTIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_HRTIM1EN)) != RESET)
+
+#define __HAL_RCC_HRTIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_HRTIM1EN)) == RESET)
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_TIM19_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM19EN)) != RESET)
+#define __HAL_RCC_SDADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC1EN)) != RESET)
+#define __HAL_RCC_SDADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC2EN)) != RESET)
+#define __HAL_RCC_SDADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC3EN)) != RESET)
+
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_TIM19_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM19EN)) == RESET)
+#define __HAL_RCC_SDADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC1EN)) == RESET)
+#define __HAL_RCC_SDADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC2EN)) == RESET)
+#define __HAL_RCC_SDADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDADC3EN)) == RESET)
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_TIM20_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM20EN)) != RESET)
+
+#define __HAL_RCC_TIM20_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM20EN)) == RESET)
+#endif /* STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Force_Release_Reset RCC Extended AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC1RST))
+
+#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+#define __HAL_RCC_ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+#define __HAL_RCC_ADC2_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#define __HAL_RCC_ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#define __HAL_RCC_ADC2_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_ADC34_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC34RST))
+
+#define __HAL_RCC_ADC34_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC34RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+#define __HAL_RCC_ADC2_FORCE_RESET() __HAL_RCC_ADC12_FORCE_RESET()
+
+#define __HAL_RCC_ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __HAL_RCC_ADC1_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#define __HAL_RCC_ADC2_RELEASE_RESET() __HAL_RCC_ADC12_RELEASE_RESET()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_FMCRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOHRST))
+
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_FMCRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOHRST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset RCC Extended APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_TIM18_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM18RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_TIM18_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM18RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset RCC Extended APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HAL_RCC_HRTIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_HRTIM1RST))
+
+#define __HAL_RCC_HRTIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_HRTIM1RST))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM19_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM19RST))
+#define __HAL_RCC_SDADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC1RST))
+#define __HAL_RCC_SDADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC2RST))
+#define __HAL_RCC_SDADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC3RST))
+
+#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_TIM19_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM19RST))
+#define __HAL_RCC_SDADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC1RST))
+#define __HAL_RCC_SDADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC2RST))
+#define __HAL_RCC_SDADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC3RST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __HAL_RCC_TIM20_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM20RST))
+
+#define __HAL_RCC_TIM20_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM20RST))
+#endif /* STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__ specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__ specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__ specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__ specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2Sx_Clock_Config RCC Extended I2Sx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__ specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__ specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC1PLLCLK_OFF ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADC1PRES, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC1PLLCLK_OFF ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADC1PRES)))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__ specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__ specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2Sx_Clock_Config RCC Extended I2Sx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__ specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2SCLKSOURCE_SYSCLK SYSCLK clock used as I2S clock source
+ * @arg @ref RCC_I2SCLKSOURCE_EXT External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UARTx_Clock_Config RCC Extended UARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the UART4 clock (UART4CLK).
+ * @param __UART4CLKSource__ specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART4SW, (uint32_t)(__UART4CLKSource__))
+
+/** @brief Macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART4SW)))
+
+/** @brief Macro to configure the UART5 clock (UART5CLK).
+ * @param __UART5CLKSource__ specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART5SW, (uint32_t)(__UART5CLKSource__))
+
+/** @brief Macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART5SW)))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC3 & ADC4 clock (ADC34CLK).
+ * @param __ADC34CLKSource__ specifies the ADC3 & ADC4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC34PLLCLK_OFF ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV1 PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV2 PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV4 PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV6 PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV8 PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV10 PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV12 PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV16 PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV32 PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV64 PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV128 PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV256 PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_ADC34_CONFIG(__ADC34CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE34, (uint32_t)(__ADC34CLKSource__))
+
+/** @brief Macro to get the ADC3 & ADC4 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC34PLLCLK_OFF ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV1 PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV2 PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV4 PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV6 PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV8 PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV10 PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV12 PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV16 PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV32 PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV64 PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV128 PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg @ref RCC_ADC34PLLCLK_DIV256 PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_GET_ADC34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE34)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the TIM8 clock (TIM8CLK).
+ * @param __TIM8CLKSource__ specifies the TIM8 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM8CLK_HCLK HCLK selected as TIM8 clock
+ * @arg @ref RCC_TIM8CLK_PLLCLK PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_TIM8_CONFIG(__TIM8CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM8SW, (uint32_t)(__TIM8CLKSource__))
+
+/** @brief Macro to get the TIM8 clock (TIM8CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM8CLK_HCLK HCLK selected as TIM8 clock
+ * @arg @ref RCC_TIM8CLK_PLLCLK PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_GET_TIM8_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM8SW)))
+
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__ specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC12PLLCLK_OFF ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV1 PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV2 PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV4 PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV6 PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV8 PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV10 PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV12 PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV16 PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV32 PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV64 PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV128 PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg @ref RCC_ADC12PLLCLK_DIV256 PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__ specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM1CLK_HCLK HCLK selected as TIM1 clock
+ * @arg @ref RCC_TIM1CLK_PLLCLK PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+/**
+ * @}
+ */
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/** @defgroup RCCEx_HRTIMx_Clock_Config RCC Extended HRTIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the HRTIM1 clock.
+ * @param __HRTIM1CLKSource__ specifies the HRTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_HRTIM1CLK_HCLK HCLK selected as HRTIM1 clock
+ * @arg @ref RCC_HRTIM1CLK_PLLCLK PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_HRTIM1SW, (uint32_t)(__HRTIM1CLKSource__))
+
+/** @brief Macro to get the HRTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_HRTIM1CLK_HCLK HCLK selected as HRTIM1 clock
+ * @arg @ref RCC_HRTIM1CLK_PLLCLK PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_HRTIM1SW)))
+/**
+ * @}
+ */
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__ specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADC1PCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock (ADC1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADC1PCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg @ref RCC_ADC1PCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADCx_Clock_Config RCC Extended SDADCx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the SDADCx clock (SDADCxCLK).
+ * @param __SDADCPrescaler__ specifies the SDADCx system clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SDADCSYSCLK_DIV1 SYSCLK clock selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV2 SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV4 SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV6 SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV8 SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV10 SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV12 SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV14 SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV16 SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV20 SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV24 SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV28 SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV32 SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV36 SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV40 SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV44 SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV48 SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_SDADC_CONFIG(__SDADCPrescaler__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SDPRE, (uint32_t)(__SDADCPrescaler__))
+
+/** @brief Macro to get the SDADCx clock prescaler.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_SDADCSYSCLK_DIV1 SYSCLK clock selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV2 SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV4 SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV6 SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV8 SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV10 SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV12 SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV14 SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV16 SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV20 SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV24 SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV28 SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV32 SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV36 SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV40 SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV44 SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg @ref RCC_SDADCSYSCLK_DIV48 SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_GET_SDADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SDPRE)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CECx_Clock_Config RCC Extended CECx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__ specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+
+/** @defgroup RCCEx_USBx_Clock_Config RCC Extended USBx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock divided by 1 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock divided by 1 selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM2 clock (TIM2CLK).
+ * @param __TIM2CLKSource__ specifies the TIM2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM2CLK_HCLK HCLK selected as TIM2 clock
+ * @arg @ref RCC_TIM2CLK_PLL PLL Clock selected as TIM2 clock
+ */
+#define __HAL_RCC_TIM2_CONFIG(__TIM2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM2SW, (uint32_t)(__TIM2CLKSource__))
+
+/** @brief Macro to get the TIM2 clock (TIM2CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM2CLK_HCLK HCLK selected as TIM2 clock
+ * @arg @ref RCC_TIM2CLK_PLL PLL Clock selected as TIM2 clock
+ */
+#define __HAL_RCC_GET_TIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM2SW)))
+
+/** @brief Macro to configure the TIM3 & TIM4 clock (TIM34CLK).
+ * @param __TIM34CLKSource__ specifies the TIM3 & TIM4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM34CLK_HCLK HCLK selected as TIM3 & TIM4 clock
+ * @arg @ref RCC_TIM34CLK_PLL PLL Clock selected as TIM3 & TIM4 clock
+ */
+#define __HAL_RCC_TIM34_CONFIG(__TIM34CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM34SW, (uint32_t)(__TIM34CLKSource__))
+
+/** @brief Macro to get the TIM3 & TIM4 clock (TIM34CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM34CLK_HCLK HCLK selected as TIM3 & TIM4 clock
+ * @arg @ref RCC_TIM34CLK_PLL PLL Clock selected as TIM3 & TIM4 clock
+ */
+#define __HAL_RCC_GET_TIM34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM34SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__ specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM15CLK_HCLK HCLK selected as TIM15 clock
+ * @arg @ref RCC_TIM15CLK_PLL PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__ specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM16CLK_HCLK HCLK selected as TIM16 clock
+ * @arg @ref RCC_TIM16CLK_PLL PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__ specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM17CLK_HCLK HCLK selected as TIM17 clock
+ * @arg @ref RCC_TIM17CLK_PLL PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/**
+ * @}
+ */
+
+#endif /* STM32f302xE || STM32f303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @addtogroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM20 clock (TIM20CLK).
+ * @param __TIM20CLKSource__ specifies the TIM20 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_TIM20CLK_HCLK HCLK selected as TIM20 clock
+ * @arg @ref RCC_TIM20CLK_PLL PLL Clock selected as TIM20 clock
+ */
+#define __HAL_RCC_TIM20_CONFIG(__TIM20CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM20SW, (uint32_t)(__TIM20CLKSource__))
+
+/** @brief Macro to get the TIM20 clock (TIM20CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_TIM20CLK_HCLK HCLK selected as TIM20 clock
+ * @arg @ref RCC_TIM20CLK_PLL PLL Clock selected as TIM20 clock
+ */
+#define __HAL_RCC_GET_TIM20_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM20SW)))
+
+/**
+ * @}
+ */
+#endif /* STM32f303xE || STM32F398xx */
+
+/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability.
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+ * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\
+ RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim.h
new file mode 100644
index 00000000..df34ae0d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim.h
@@ -0,0 +1,1623 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_H
+#define __STM32F3xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1U) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
+ This parameter can be a value of @ref TIM_AutoReloadPreload */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+} TIM_Encoder_InitTypeDef;
+
+
+/**
+ * @brief TIM Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief TIM Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIMEx_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIMEx_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref TIM_DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING (0x00000000U) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED (0x0000U) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 (0x0000U) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2U */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4U */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8U */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP (0x0000U)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 (0x0000U)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+ * @{
+ */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE (0x0000U) /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE (TIM_CR1_ARPE) /*!< TIMx_ARR register is buffered */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE (0x0000U)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH (0x0000U)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH (0x0000U)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1U, 2U, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1U, 2U, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1U, 2U, 3 or 4 is selected to be connected to TRC */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 (0x0000U) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE (0x0000U)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#if defined(TIM_SR_B2IF)
+#define TIM_FLAG_BREAK2 (TIM_SR_B2IF)
+#endif
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 (0x0000U)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR Off State Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI Off State Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF (0x0000U)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable Disable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW (0x0000U)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET (0x0000U)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE (0x0080U)
+#define TIM_MASTERSLAVEMODE_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 (0x0000U)
+#define TIM_TS_ITR1 (0x0010U)
+#define TIM_TS_ITR2 (0x0020U)
+#define TIM_TS_ITR3 (0x0030U)
+#define TIM_TS_TI1F_ED (0x0040U)
+#define TIM_TS_TI1FP1 (0x0050U)
+#define TIM_TS_TI2FP2 (0x0060U)
+#define TIM_TS_ETRF (0x0070U)
+#define TIM_TS_NONE (0xFFFFU)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+ /** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 (0x0000U)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000U)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100U)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200U)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300U)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400U)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500U)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600U)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700U)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800U)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900U)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00U)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00U)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00U)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00U)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00U)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00U)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000U)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100U)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0U) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1U) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2U) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3U) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4U) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5U) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6U) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE (0x0001U)
+#define TIM_CCx_DISABLE (0x0000U)
+#define TIM_CCxN_ENABLE (0x0004U)
+#define TIM_CCxN_DISABLE (0x0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0U)
+/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0U) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0U) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0U)
+
+/* The Main Output Enable of a timer instance is disabled unconditionally */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled uncondiotionally
+ */
+#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
+
+/**
+ * @brief Enables the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Enables the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/**
+ * @brief Disables the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/**
+ * @brief Checks whether the specified TIM interrupt flag is set or not.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the specified TIM interrupt flag.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+ * @brief Checks whether the specified TIM interrupt has occurred or not.
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the TIM interrupt source to check.
+ * @retval The state of TIM_IT (SET or RESET).
+ */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TIM interrupt pending bits
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * @retval None
+ */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Indicates whether or not the TIM Counter is used as downcounter
+ * @param __HANDLE__ TIM handle.
+ * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+ * @note This macro is particularly usefull to get the counting mode when the timer operates in Center-aligned mode or Encoder mode.
+ */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+ * @brief Sets the TIM active prescaler register value on update event.
+ * @param __HANDLE__ TIM handle.
+ * @param __PRESC__ specifies the active prescaler register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __COUNTER__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) \
+ ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __AUTORELOAD__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0U)
+
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \
+ ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CKD__ specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0U)
+
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @retval The clock division can be one of the following values:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0U)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval The input capture prescaler can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__ TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__ TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * (+) Counter overflow/underflow
+ * (+) Setting the UG bit
+ * (+) Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Sets the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__ Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0U)
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Private Constants -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+ * @{
+ */
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+ * @}
+ */
+/* End of private constants --------------------------------------------------*/
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+ ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FFU) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xFU)
+
+/** @brief Set TIM IC prescaler
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @param __ICPSC__ specifies the prescaler value.
+ * @retval None
+ */
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+/** @brief Reset TIM IC prescaler
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @retval None
+ */
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+/** @brief Set TIM IC polarity
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @param __POLARITY__ specifies TIM Channel Polarity
+ * @retval None
+ */
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
+
+/** @brief Reset TIM IC polarity
+ * @param __HANDLE__ TIM handle
+ * @param __CHANNEL__ specifies TIM Channel
+ * @retval None
+ */
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/* Include TIM HAL Extended module */
+#include "stm32f3xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private Functions --------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim_ex.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim_ex.h
new file mode 100644
index 00000000..d5dcde5d
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Inc/stm32f3xx_hal_tim_ex.h
@@ -0,0 +1,1243 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_EX_H
+#define __STM32F3xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIMEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFFU */
+} TIM_HallSensor_InitTypeDef;
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: timer instances provide a single TRGO
+ * output
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: single break input with configurable polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFFU */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the brek input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xFU */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note Advanced timers provide TRGO2 internal line which is redirected
+ * to the ADC
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Channel TIMEx Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 (0x0000U)
+#define TIM_CHANNEL_2 (0x0004U)
+#define TIM_CHANNEL_3 (0x0008U)
+#define TIM_CHANNEL_4 (0x000CU)
+#define TIM_CHANNEL_ALL (0x0018U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING (0x0000U)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR (0x0001U)
+#define TIM_CLEARINPUTSOURCE_NONE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE (0x0000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Event_Source TIMEx Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1U */
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2U */
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3U */
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4U */
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_DMA_Base_address TIMEx DMA BAse Address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_OR (0x00000013U)
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Channel TIMEx Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 (0x0000U)
+#define TIM_CHANNEL_2 (0x0004U)
+#define TIM_CHANNEL_3 (0x0008U)
+#define TIM_CHANNEL_4 (0x000CU)
+#define TIM_CHANNEL_5 (0x0010U)
+#define TIM_CHANNEL_6 (0x0014U)
+#define TIM_CHANNEL_ALL (0x003CU)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING (0x0000U)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR (0x0001U)
+#define TIM_CLEARINPUTSOURCE_OCREFCLR (0x0002U)
+#define TIM_CLEARINPUTSOURCE_NONE (0x0000U)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable TIMEX Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE (0x00000000U)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Polarity TIMEx Break Input 2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW (0x00000000U)
+#define TIM_BREAK2POLARITY_HIGH ((uint32_t)TIM_BDTR_BK2P)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIMEx Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET (0x00000000U)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE (0x0000U)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIMEx Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1U */
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2U */
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3U */
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4U */
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
+#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIMEx DMA Base Address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000U)
+#define TIM_DMABASE_CR2 (0x00000001U)
+#define TIM_DMABASE_SMCR (0x00000002U)
+#define TIM_DMABASE_DIER (0x00000003U)
+#define TIM_DMABASE_SR (0x00000004U)
+#define TIM_DMABASE_EGR (0x00000005U)
+#define TIM_DMABASE_CCMR1 (0x00000006U)
+#define TIM_DMABASE_CCMR2 (0x00000007U)
+#define TIM_DMABASE_CCER (0x00000008U)
+#define TIM_DMABASE_CNT (0x00000009U)
+#define TIM_DMABASE_PSC (0x0000000AU)
+#define TIM_DMABASE_ARR (0x0000000BU)
+#define TIM_DMABASE_RCR (0x0000000CU)
+#define TIM_DMABASE_CCR1 (0x0000000DU)
+#define TIM_DMABASE_CCR2 (0x0000000EU)
+#define TIM_DMABASE_CCR3 (0x0000000FU)
+#define TIM_DMABASE_CCR4 (0x00000010U)
+#define TIM_DMABASE_BDTR (0x00000011U)
+#define TIM_DMABASE_DCR (0x00000012U)
+#define TIM_DMABASE_CCMR3 (0x00000015U)
+#define TIM_DMABASE_CCR5 (0x00000016U)
+#define TIM_DMABASE_CCR6 (0x00000017U)
+#define TIM_DMABASE_OR (0x00000018U)
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Remap TIMEx Remapping
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+/**
+ * @}
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+
+#if defined(STM32F334x8)
+/** @defgroup TIMEx_Remap TIMEx Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIMEx Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC2_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC2_AWD1 (0x00000004U) /*!< TIM1_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM1_ADC2_AWD2 (0x00000008U) /*!< TIM1_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM1_ADC2_AWD3 (0x0000000CU) /*!< TIM1_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_NONE (0x00000000U) /*!< Non significant value for TIM16U */
+/**
+ * @}
+ */
+#endif /* STM32F334x8 */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup TIMEx_Remap TIMEx Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001U) /*!< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002U) /*!< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003U) /*!< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIMEx Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004U) /*!< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008U) /*!< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000CU) /*!< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004U) /*!< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008U) /*!< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000CU) /*!< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000U) /*!< Non significant value for TIM16U */
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup TIMEx_Remap TIMEx Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001U) /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002U) /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003U) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001U) /*!< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002U) /*!< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003U) /*!< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000U) /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001U) /*!< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002U) /*!< TIM16 TI1 is connected to HSE/32U */
+#define TIM_TIM16_MCO (0x00000003U) /*!< TIM16 TI1 is connected to MCO */
+#define TIM_TIM20_ADC3_NONE (0x00000000U) /*!< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC3_AWD1 (0x00000001U) /*!< TIM20_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM20_ADC3_AWD2 (0x00000002U) /*!< TIM20_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM20_ADC3_AWD3 (0x00000003U) /*!< TIM20_ETR is connected to ADC3 AWD3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIMEx Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000U) /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004U) /*!< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008U) /*!< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000CU) /*!< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000U) /*!< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004U) /*!< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008U) /*!< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000CU) /*!< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000U) /*!< Non significant value for TIM16U */
+#define TIM_TIM20_ADC4_NONE (0x00000000U) /*!< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC4_AWD1 (0x00000004U) /*!< TIM20_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM20_ADC4_AWD2 (0x00000008U) /*!< TIM20_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM20_ADC4_AWD3 (0x0000000CU) /*!< TIM20_ETR is connected to ADC4 AWD3 */
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Remap TIMEx remapping
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000U) /*!< TIM8 TRGOUT is connected to TIM2_ITR1 */
+#define TIM_TIM2_ETH_PTP (0x00000400U) /*!< PTP trigger output is connected to TIM2_ITR1 */
+#define TIM_TIM2_USBFS_SOF (0x00000800U) /*!< OTG FS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM2_USBHS_SOF (0x00000C00U) /*!< OTG HS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM14_GPIO (0x00000000U) /*!< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001U) /*!< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002U) /*!< TIM14 TI1 is connected to HSE/32U */
+#define TIM_TIM14_MCO (0x00000003U) /*!< TIM14 TI1 is connected to MCO */
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Group_Channel5 Group Channel 5 and Channel 1U, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE 0x00000000 /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_DCR) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+
+#define IS_TIM_BREAK_FILTER(BRKFILTER) ((BRKFILTER) <= 0xFU)
+
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+
+#define IS_TIM_BREAK2_POLARITY(POLARITY) (((POLARITY) == TIM_BREAK2POLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAK2POLARITY_HIGH))
+
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFE00U) == 0x00000000U) && ((SOURCE) != 0x00000000U))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_CCMR3) || \
+ ((BASE) == TIM_DMABASE_CCR5) || \
+ ((BASE) == TIM_DMABASE_CCR6) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP) == TIM_TIM16_GPIO) ||\
+ ((REMAP) == TIM_TIM16_RTC) ||\
+ ((REMAP) == TIM_TIM16_HSE) ||\
+ ((REMAP) == TIM_TIM16_MCO))
+
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+#if defined(STM32F334x8)
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC2_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC2_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC2_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC2_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_NONE) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD1) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD2) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD3))
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD3))
+
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM2_TIM8_TRGO) ||\
+ ((REMAP) == TIM_TIM2_ETH_PTP) ||\
+ ((REMAP) == TIM_TIM2_USBFS_SOF) ||\
+ ((REMAP) == TIM_TIM2_USBHS_SOF) ||\
+ ((REMAP) == TIM_TIM14_GPIO) ||\
+ ((REMAP) == TIM_TIM14_RTC) ||\
+ ((REMAP) == TIM_TIM14_HSE) ||\
+ ((REMAP) == TIM_TIM14_MCO))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFFU) == 0x00000000U))
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFFU)
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIMEx Exported Macros
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2U)))
+
+/**
+ * @brief Sets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE))
+
+/**
+ * @brief Resets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE))
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+
+/**
+ * @brief Sets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE))
+
+/**
+ * @brief Resets the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 &= (uint16_t)~TIM_CCMR3_OC6PE))
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx) || defined(STM32F334x8)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2);
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extended Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extended Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal.c
new file mode 100644
index 00000000..5be17ad4
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal.c
@@ -0,0 +1,486 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal.c
+ * @author MCD Application Team
+ * @brief HAL module driver.
+ * This is the common part of the HAL initialization
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The common HAL driver contains a set of generic and common APIs that can be
+ used by the PPP peripheral drivers and the user to start using the HAL.
+ [..]
+ The HAL contains two APIs categories:
+ (+) HAL Initialization and de-initialization functions
+ (+) HAL Control functions
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HAL HAL
+ * @brief HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup HAL_Private Constants
+ * @{
+ */
+/**
+ * @brief STM32F3xx HAL Driver version number V1.5.0
+ */
+#define __STM32F3xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
+#define __STM32F3xx_HAL_VERSION_SUB1 (0x05U) /*!< [23:16] sub1 version */
+#define __STM32F3xx_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
+#define __STM32F3xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
+#define __STM32F3xx_HAL_VERSION ((__STM32F3xx_HAL_VERSION_MAIN << 24U)\
+ |(__STM32F3xx_HAL_VERSION_SUB1 << 16U)\
+ |(__STM32F3xx_HAL_VERSION_SUB2 << 8U )\
+ |(__STM32F3xx_HAL_VERSION_RC))
+
+#define IDCODE_DEVID_MASK (0x00000FFFU)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+__IO uint32_t uwTick;
+/**
+ * @}
+ */
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initializes the Flash interface, the NVIC allocation and initial clock
+ configuration. It initializes the source of time base also when timeout
+ is needed and the backup domain when enabled.
+ (+) de-Initializes common part of the HAL.
+ (+) Configure The time base source to have 1ms time base with a dedicated
+ Tick interrupt priority.
+ (++) Systick timer is used by default as source of time base, but user
+ can eventually implement his proper time base source (a general purpose
+ timer for example or other time source), keeping in mind that Time base
+ duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+ handled in milliseconds basis.
+ (++) Time base configuration function (HAL_InitTick ()) is called automatically
+ at the beginning of the program after reset by HAL_Init() or at any time
+ when clock is configured, by HAL_RCC_ClockConfig().
+ (++) Source of time base is configured to generate interrupts at regular
+ time intervals. Care must be taken if HAL_Delay() is called from a
+ peripheral ISR process, the Tick interrupt line must have higher priority
+ (numerically lower) than the peripheral interrupt. Otherwise the caller
+ ISR process will be blocked.
+ (++) functions affecting time base configurations are declared as __Weak
+ to make override possible in case of other implementations in user file.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function configures the Flash prefetch,
+ * Configures time base source, NVIC and Low level hardware
+ * @note This function is called at the beginning of program after reset and before
+ * the clock configuration
+ *
+ * @note The Systick configuration is based on HSI clock, as HSI is the clock
+ * used after a system Reset and the NVIC configuration is set to Priority group 4
+ *
+ * @note The time base configuration is based on MSI clock when exting from Reset.
+ * Once done, time base tick start incrementing.
+ * In the default implementation,Systick is used as source of time base.
+ * The tick variable is incremented each 1ms in its ISR.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_Init(void)
+{
+ /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0U)
+ __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+ /* Set Interrupt Group Priority */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+ /* Enable systick and configure 1ms tick (default clock after Reset is HSI) */
+ HAL_InitTick(TICK_INT_PRIORITY);
+
+ /* Init the low level hardware */
+ HAL_MspInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief This function de-Initializes common part of the HAL and stops the source
+ * of time base.
+ * @note This function is optional.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+ /* Reset of all peripherals */
+ __HAL_RCC_APB1_FORCE_RESET();
+ __HAL_RCC_APB1_RELEASE_RESET();
+
+ __HAL_RCC_APB2_FORCE_RESET();
+ __HAL_RCC_APB2_RELEASE_RESET();
+
+ __HAL_RCC_AHB_FORCE_RESET();
+ __HAL_RCC_AHB_RELEASE_RESET();
+
+ /* De-Init the low level hardware */
+ HAL_MspDeInit();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the MSP.
+ * @retval None
+ */
+__weak void HAL_MspDeInit(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function configures the source of the time base.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
+ * @note This function is called automatically at the beginning of program after
+ * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals.
+ * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+ * The the SysTick interrupt must have higher priority (numerically lower)
+ * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementation in user file.
+ * @param TickPriority Tick interrupt priority.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+ /*Configure the SysTick to have interrupt in 1ms time basis*/
+ HAL_SYSTICK_Config(SystemCoreClock / 1000U);
+
+ /*Configure the SysTick IRQ priority */
+ HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0U);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### HAL Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Provide a tick value in millisecond
+ (+) Provide a blocking delay in millisecond
+ (+) Suspend the time base source interrupt
+ (+) Resume the time base source interrupt
+ (+) Get the HAL API driver version
+ (+) Get the device identifier
+ (+) Get the device revision identifier
+ (+) Enable/Disable Debug module during Sleep mode
+ (+) Enable/Disable Debug module during STOP mode
+ (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function is called to increment a global variable "uwTick"
+ * used as application time base.
+ * @note In the default implementation, this variable is incremented each 1ms
+ * in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_IncTick(void)
+{
+ uwTick++;
+}
+
+/**
+ * @brief Povides a tick value in millisecond.
+ * @note The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval tick value
+ */
+__weak uint32_t HAL_GetTick(void)
+{
+ return uwTick;
+}
+
+/**
+ * @brief This function provides accurate delay (in milliseconds) based
+ * on variable incremented.
+ * @note In the default implementation , SysTick timer is the source of time base.
+ * It is used to generate interrupts at regular time intervals where uwTick
+ * is incremented.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @param Delay specifies the delay time length, in milliseconds.
+ * @retval None
+ */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t wait = Delay;
+
+ /* Add a period to guarantee minimum wait */
+ if (wait < HAL_MAX_DELAY)
+ {
+ wait++;
+ }
+
+ while((HAL_GetTick() - tickstart) < wait)
+ {
+ }
+}
+
+/**
+ * @brief Suspend Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+ * is called, the the SysTick interrupt will be disabled and so Tick increment
+ * is suspended.
+ * @note This function is declared as __weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_SuspendTick(void)
+
+{
+ /* Disable SysTick Interrupt */
+ SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+
+}
+
+/**
+ * @brief Resume Tick increment.
+ * @note In the default implementation , SysTick timer is the source of time base. It is
+ * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+ * is called, the the SysTick interrupt will be enabled and so Tick increment
+ * is resumed.
+ * The function is declared as __Weak to be overwritten in case of other
+ * implementations in user file.
+ * @retval None
+ */
+__weak void HAL_ResumeTick(void)
+{
+ /* Enable SysTick Interrupt */
+ SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
+
+}
+
+/**
+ * @brief This function returns the HAL revision
+ * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F3xx_HAL_VERSION;
+}
+
+/**
+ * @brief Returns the device revision identifier.
+ * @retval Device revision identifier
+ */
+uint32_t HAL_GetREVID(void)
+{
+ return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @retval Device identifier
+ */
+uint32_t HAL_GetDEVID(void)
+{
+ return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Returns first word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw0(void)
+{
+ return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+ * @brief Returns second word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw1(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+ * @brief Returns third word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw2(void)
+{
+ return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+ * @brief Enable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Disable the Debug Module during SLEEP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @retval None
+ */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_cortex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_cortex.c
new file mode 100644
index 00000000..38080d53
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_cortex.c
@@ -0,0 +1,529 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cortex.c
+ * @author MCD Application Team
+ * @brief CORTEX HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the CORTEX:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ * @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+
+ [..]
+ *** How to configure Interrupts using CORTEX HAL driver ***
+ ===========================================================
+ [..]
+ This section provides functions allowing to configure the NVIC interrupts (IRQ).
+ The Cortex-M4 exceptions are managed by CMSIS functions.
+
+ (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function
+
+ (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
+
+ (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
+
+
+ -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible.
+ The pending IRQ priority will be managed only by the sub priority.
+
+ -@- IRQ priority order (sorted by highest to lowest priority):
+ (+@) Lowest pre-emption priority
+ (+@) Lowest sub priority
+ (+@) Lowest hardware priority (IRQ number)
+
+ [..]
+ *** How to configure Systick using CORTEX HAL driver ***
+ ========================================================
+ [..]
+ Setup SysTick Timer for time base
+
+ (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
+ is a CMSIS function that:
+ (++) Configures the SysTick Reload register with value passed as function parameter.
+ (++) Configures the SysTick IRQ priority to the lowest value (0x0FU).
+ (++) Resets the SysTick Counter register.
+ (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+ (++) Enables the SysTick Interrupt.
+ (++) Starts the SysTick Counter.
+
+ (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+ __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+ HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+ inside the stm32f3xx_hal_cortex.h file.
+
+ (+) You can change the SysTick IRQ priority by calling the
+ HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+ call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+ (+) To adjust the SysTick time base, use the following formula:
+
+ Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
+ (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+ (++) Reload Value should not exceed 0xFFFFFF
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/*
+ Additional Tables: CORTEX_NVIC_Priority_Table
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function
+ ==========================================================================================================================
+ NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ ==========================================================================================================================
+ NVIC_PRIORITYGROUP_0 | 0 | 0U-15 | 0 bits for pre-emption priority
+ | | | 4 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_1 | 0U-1 | 0U-7 | 1 bits for pre-emption priority
+ | | | 3 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_2 | 0U-3 | 0U-3 | 2 bits for pre-emption priority
+ | | | 2 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_3 | 0U-7 | 0U-1 | 3 bits for pre-emption priority
+ | | | 1 bits for subpriority
+ --------------------------------------------------------------------------------------------------------------------------
+ NVIC_PRIORITYGROUP_4 | 0U-15 | 0 | 4 bits for pre-emption priority
+ | | | 0 bits for subpriority
+ ==========================================================================================================================
+
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX CORTEX
+ * @brief CORTEX CORTEX HAL module driver
+ * @{
+ */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+ Systick functionalities
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Sets the priority grouping field (pre-emption priority and subpriority)
+ * using the required unlock sequence.
+ * @param PriorityGroup The priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+ NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+ * @brief Sets the priority of an interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @param PreemptPriority The pre-emption priority for the IRQn channel.
+ * This parameter can be a value between 0 and 15 as described in the table CORTEX_NVIC_Priority_Table
+ * A lower priority value indicates a higher priority
+ * @param SubPriority the subpriority level for the IRQ channel.
+ * This parameter can be a value between 0 and 15 as described in the table CORTEX_NVIC_Priority_Table
+ * A lower priority value indicates a higher priority.
+ * @retval None
+ */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t prioritygroup = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+ prioritygroup = NVIC_GetPriorityGrouping();
+
+ NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+ * @brief Enables a device specific interrupt in the NVIC interrupt controller.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Enable interrupt */
+ NVIC_EnableIRQ(IRQn);
+}
+
+/**
+ * @brief Disables a device specific interrupt in the NVIC interrupt controller.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+
+ /* Disable interrupt */
+ NVIC_DisableIRQ(IRQn);
+}
+
+/**
+ * @brief Initiates a system reset request to reset the MCU.
+ * @retval None
+ */
+void HAL_NVIC_SystemReset(void)
+{
+ /* System Reset */
+ NVIC_SystemReset();
+}
+
+/**
+ * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ * Counter is in free running mode to generate periodic interrupts.
+ * @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
+ * @retval status: - 0 Function succeeded.
+ * - 1 Function failed.
+ */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+ return SysTick_Config(TicksNumb);
+}
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CORTEX
+ (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+ * @{
+ */
+
+#if (__MPU_PRESENT == 1U)
+
+/**
+ * @brief Disables the MPU also clears the HFNMIENA bit (ARM recommendation)
+ * @retval None
+ */
+void HAL_MPU_Disable(void)
+{
+ /* Disable fault exceptions */
+ SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+
+ /* Disable the MPU */
+ MPU->CTRL = 0U;
+}
+
+/**
+ * @brief Enables the MPU
+ * @param MPU_Control Specifies the control mode of the MPU during hard fault,
+ * NMI, FAULTMASK and privileged access to the default memory
+ * This parameter can be one of the following values:
+ * @arg MPU_HFNMI_PRIVDEF_NONE
+ * @arg MPU_HARDFAULT_NMI
+ * @arg MPU_PRIVILEGED_DEFAULT
+ * @arg MPU_HFNMI_PRIVDEF
+ * @retval None
+ */
+void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+ /* Enable the MPU */
+ MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+
+ /* Enable fault exceptions */
+ SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+}
+
+ /**
+ * @brief Initializes and configures the Region and the memory to be protected.
+ * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
+ * the initialization and configuration information.
+ * @retval None
+ */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+ /* Check the parameters */
+ assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+ assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+ /* Set the Region number */
+ MPU->RNR = MPU_Init->Number;
+
+ if ((MPU_Init->Enable) != RESET)
+ {
+ /* Check the parameters */
+ assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+ assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+ assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+ assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+ assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+ assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+ assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+ assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+
+ MPU->RBAR = MPU_Init->BaseAddress;
+ MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
+ ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
+ ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
+ ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
+ ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
+ ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
+ ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
+ ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
+ ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
+ }
+ else
+ {
+ MPU->RBAR = 0x00U;
+ MPU->RASR = 0x00U;
+ }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+ * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
+ * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+ */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+ /* Get the PRIGROUP[10:8] field value */
+ return NVIC_GetPriorityGrouping();
+}
+
+/**
+ * @brief Gets the priority of an interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @param PriorityGroup: the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
+ * @param pSubPriority Pointer on the Subpriority value (starting from 0).
+ * @retval None
+ */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+ NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+ * @brief Sets Pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Set interrupt pending */
+ NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets Pending Interrupt (reads the pending register in the NVIC
+ * and returns the pending bit for the specified interrupt).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ /* Return 1 if pending else 0U */
+ return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Clears the pending bit of an external interrupt.
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval None
+ */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ /* Clear pending interrupt */
+ NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+ * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+ * @param IRQn External interrupt number
+ * This parameter can be an enumerator of IRQn_Type enumeration
+ * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f3xxxx.h))
+ * @retval status: - 0 Interrupt status is not pending.
+ * - 1 Interrupt status is pending.
+ */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+ /* Return 1 if active else 0U */
+ return NVIC_GetActive(IRQn);
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param CLKSource specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+ if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+ {
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+ }
+}
+
+/**
+ * @brief This function handles SYSTICK interrupt request.
+ * @retval None
+ */
+void HAL_SYSTICK_IRQHandler(void)
+{
+ HAL_SYSTICK_Callback();
+}
+
+/**
+ * @brief SYSTICK callback.
+ * @retval None
+ */
+__weak void HAL_SYSTICK_Callback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SYSTICK_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_dma.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_dma.c
new file mode 100644
index 00000000..69e42aa9
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_dma.c
@@ -0,0 +1,904 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma.c
+ * @author MCD Application Team
+ * @brief DMA HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Direct Memory Access (DMA) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable and configure the peripheral to be connected to the DMA Channel
+ (except for internal SRAM / FLASH memories: no initialization is
+ necessary). Please refer to Reference manual for connection between peripherals
+ and DMA requests .
+
+ (#) For a given Channel, program the required configuration through the following parameters:
+ Transfer Direction, Source and Destination data formats,
+ Circular or Normal mode, Channel Priority level, Source and Destination Increment mode,
+ using HAL_DMA_Init() function.
+
+ (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
+ detection.
+
+ (#) Use HAL_DMA_Abort() function to abort the current transfer
+
+ -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
+ address and destination address and the Length of data to be transferred
+ (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
+ case a fixed Timeout can be configured by User depending from his application.
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+ (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
+ (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
+ Source address and destination address and the Length of data to be transferred.
+ In this case the DMA interrupt is configured
+ (+) Use HAL_DMA_Channel_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+ (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
+ add his own function by customization of function pointer XferCpltCallback and
+ XferErrorCallback (i.e a member of DMA handle structure).
+
+ *** DMA HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DMA HAL driver.
+
+ [..]
+ (@) You can refer to the DMA HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA DMA
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @{
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to initialize the DMA Channel source
+ and destination addresses, incrementation and data sizes, transfer direction,
+ circular/normal mode selection, memory-to-memory mode selection and Channel priority value.
+ [..]
+ The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+ reference manual.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the DMA according to the specified
+ * parameters in the DMA_InitTypeDef and initialize the associated handle.
+ * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the DMA handle allocation */
+ if(NULL == hdma)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+ assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+ assert_param(IS_DMA_MODE(hdma->Init.Mode));
+ assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ /* Get the CR register value */
+ tmp = hdma->Instance->CCR;
+
+ /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */
+ tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \
+ DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \
+ DMA_CCR_DIR));
+
+ /* Prepare the DMA Channel configuration */
+ tmp |= hdma->Init.Direction |
+ hdma->Init.PeriphInc | hdma->Init.MemInc |
+ hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+ hdma->Init.Mode | hdma->Init.Priority;
+
+ /* Write to DMA Channel CR register */
+ hdma->Instance->CCR = tmp;
+
+ /* Initialize DmaBaseAddress and ChannelIndex parameters used
+ by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+ DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clean callbacks */
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+
+ /* Initialise the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Allocate lock resource and initialize it */
+ hdma->Lock = HAL_UNLOCKED;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the DMA peripheral
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+ /* Check the DMA handle allocation */
+ if(NULL == hdma)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+ /* Disable the selected DMA Channelx */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Reset DMA Channel control register */
+ hdma->Instance->CCR = 0U;
+
+ /* Reset DMA Channel Number of Data to Transfer register */
+ hdma->Instance->CNDTR = 0U;
+
+ /* Reset DMA Channel peripheral address register */
+ hdma->Instance->CPAR = 0U;
+
+ /* Reset DMA Channel memory address register */
+ hdma->Instance->CMAR = 0U;
+
+ /* Get DMA Base Address */
+ DMA_CalcBaseAndBitshift(hdma);
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Initialize the error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the DMA state */
+ hdma->State = HAL_DMA_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions
+ * @brief I/O operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the source, destination address and data length and Start DMA transfer
+ (+) Configure the source, destination address and data length and
+ Start DMA transfer with interrupt
+ (+) Abort DMA transfer
+ (+) Poll for transfer complete
+ (+) Handle DMA interrupt request
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Start the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Disable the peripheral */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the Peripheral */
+ hdma->Instance->CCR |= DMA_CCR_EN;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Remain BUSY */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Start the DMA Transfer with interrupt enabled.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ /* Change DMA peripheral state */
+ hdma->State = HAL_DMA_STATE_BUSY;
+
+ hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Disable the peripheral */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Configure the source, destination address and the data length */
+ DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+ /* Enable the transfer complete, & transfer error interrupts */
+ /* Half transfer interrupt is optional: enable it only if associated callback is available */
+ if(NULL != hdma->XferHalfCpltCallback )
+ {
+ hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+ }
+ else
+ {
+ hdma->Instance->CCR |= (DMA_IT_TC | DMA_IT_TE);
+ hdma->Instance->CCR &= ~DMA_IT_HT;
+ }
+
+ /* Enable the Peripheral */
+ hdma->Instance->CCR |= DMA_CCR_EN;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Remain BUSY */
+ status = HAL_BUSY;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Abort the DMA Transfer.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+ /* Disable DMA IT */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+
+ /* Disable the channel */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex);
+
+ /* Change the DMA state*/
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the DMA Transfer in Interrupt mode.
+ * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(HAL_DMA_STATE_BUSY != hdma->State)
+ {
+ /* no transfer ongoing */
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+
+ status = HAL_ERROR;
+ }
+ else
+ {
+
+ /* Disable DMA IT */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+
+ /* Disable the channel */
+ hdma->Instance->CCR &= ~DMA_CCR_EN;
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ /* Call User Abort callback */
+ if(hdma->XferAbortCallback != NULL)
+ {
+ hdma->XferAbortCallback(hdma);
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Polling for transfer complete.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param CompleteLevel Specifies the DMA level complete.
+ * @param Timeout Timeout duration.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
+{
+ uint32_t temp;
+ uint32_t tickstart = 0U;
+
+ if(HAL_DMA_STATE_BUSY != hdma->State)
+ {
+ /* no transfer ongoing */
+ hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
+ __HAL_UNLOCK(hdma);
+ return HAL_ERROR;
+ }
+
+ /* Polling mode not supported in circular mode */
+ if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC))
+ {
+ hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
+ return HAL_ERROR;
+ }
+
+ /* Get the level transfer complete flag */
+ if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+ {
+ /* Transfer Complete flag */
+ temp = DMA_FLAG_TC1 << hdma->ChannelIndex;
+ }
+ else
+ {
+ /* Half Transfer Complete flag */
+ temp = DMA_FLAG_HT1 << hdma->ChannelIndex;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(RESET == (hdma->DmaBaseAddress->ISR & temp))
+ {
+ if(RESET != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << hdma->ChannelIndex)))
+ {
+ /* When a DMA transfer error occurs */
+ /* A hardware clear of its EN bits is performed */
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TE;
+
+ /* Change the DMA state */
+ hdma->State= HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
+ {
+ /* Clear the transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex;
+
+ /* The selected Channelx EN bit is cleared (DMA is disabled and
+ all transfers are complete) */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+ else
+ {
+ /* Clear the half transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdma);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle DMA interrupt request.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval None
+ */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+ uint32_t flag_it = hdma->DmaBaseAddress->ISR;
+ uint32_t source_it = hdma->Instance->CCR;
+
+ /* Half Transfer Complete Interrupt management ******************************/
+ if ((RESET != (flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_HT)))
+ {
+ /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+ {
+ /* Disable the half transfer interrupt */
+ hdma->Instance->CCR &= ~DMA_IT_HT;
+ }
+
+ /* Clear the half transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_HT1 << hdma->ChannelIndex;
+
+ /* DMA peripheral state is not updated in Half Transfer */
+ /* State is updated only in Transfer Complete case */
+
+ if(hdma->XferHalfCpltCallback != NULL)
+ {
+ /* Half transfer callback */
+ hdma->XferHalfCpltCallback(hdma);
+ }
+ }
+
+ /* Transfer Complete Interrupt management ***********************************/
+ else if ((RESET != (flag_it & (DMA_FLAG_TC1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TC)))
+ {
+ if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
+ {
+ /* Disable the transfer complete & transfer error interrupts */
+ /* if the DMA mode is not CIRCULAR */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_TE);
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+ }
+
+ /* Clear the transfer complete flag */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_TC1 << hdma->ChannelIndex;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ if(hdma->XferCpltCallback != NULL)
+ {
+ /* Transfer complete callback */
+ hdma->XferCpltCallback(hdma);
+ }
+ }
+
+ /* Transfer Error Interrupt management ***************************************/
+ else if (( RESET != (flag_it & (DMA_FLAG_TE1 << hdma->ChannelIndex))) && (RESET != (source_it & DMA_IT_TE)))
+ {
+ /* When a DMA transfer error occurs */
+ /* A hardware clear of its EN bits is performed */
+ /* Then, disable all DMA interrupts */
+ hdma->Instance->CCR &= ~(DMA_IT_TC | DMA_IT_HT | DMA_IT_TE);
+
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = DMA_FLAG_GL1 << hdma->ChannelIndex;
+
+ /* Update error code */
+ hdma->ErrorCode = HAL_DMA_ERROR_TE;
+
+ /* Change the DMA state */
+ hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
+ if(hdma->XferErrorCallback != NULL)
+ {
+ /* Transfer error callback */
+ hdma->XferErrorCallback(hdma);
+ }
+ }
+}
+
+/**
+ * @brief Register callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @param pCallback pointer to private callback function which has pointer to
+ * a DMA_HandleTypeDef structure as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma))
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = pCallback;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = pCallback;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister callbacks
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @param CallbackID User Callback identifer
+ * a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdma);
+
+ if(HAL_DMA_STATE_READY == hdma->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DMA_XFER_CPLT_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_HALFCPLT_CB_ID:
+ hdma->XferHalfCpltCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ERROR_CB_ID:
+ hdma->XferErrorCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ABORT_CB_ID:
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ case HAL_DMA_XFER_ALL_CB_ID:
+ hdma->XferCpltCallback = NULL;
+ hdma->XferHalfCpltCallback = NULL;
+ hdma->XferErrorCallback = NULL;
+ hdma->XferAbortCallback = NULL;
+ break;
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdma);
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DMA state
+ (+) Get error code
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the DMA state.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval HAL state
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+ return hdma->State;
+}
+
+/**
+ * @brief Return the DMA error code
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @retval DMA Error Code
+ */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+ return hdma->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Set the DMA Transfer parameters.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Channel.
+ * @param SrcAddress The source memory Buffer address
+ * @param DstAddress The destination memory Buffer address
+ * @param DataLength The length of data to be transferred from source to destination
+ * @retval HAL status
+ */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+ /* Clear all flags */
+ hdma->DmaBaseAddress->IFCR = (DMA_FLAG_GL1 << hdma->ChannelIndex);
+
+ /* Configure DMA Channel data length */
+ hdma->Instance->CNDTR = DataLength;
+
+ /* Peripheral to Memory */
+ if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+ {
+ /* Configure DMA Channel destination address */
+ hdma->Instance->CPAR = DstAddress;
+
+ /* Configure DMA Channel source address */
+ hdma->Instance->CMAR = SrcAddress;
+ }
+ /* Memory to Peripheral */
+ else
+ {
+ /* Configure DMA Channel source address */
+ hdma->Instance->CPAR = SrcAddress;
+
+ /* Configure DMA Channel destination address */
+ hdma->Instance->CMAR = DstAddress;
+ }
+}
+
+/**
+ * @brief Set the DMA base address and channel index depending on DMA instance
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA Stream.
+ * @retval None
+ */
+static void DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+#if defined (DMA2)
+ /* calculation of the channel index */
+ if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1))
+ {
+ /* DMA1 */
+ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
+ hdma->DmaBaseAddress = DMA1;
+ }
+ else
+ {
+ /* DMA2 */
+ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U;
+ hdma->DmaBaseAddress = DMA2;
+ }
+#else
+ /* calculation of the channel index */
+ /* DMA1 */
+ hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
+ hdma->DmaBaseAddress = DMA1;
+#endif
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash.c
new file mode 100644
index 00000000..5762694e
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash.c
@@ -0,0 +1,707 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash.c
+ * @author MCD Application Team
+ * @brief FLASH HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the internal FLASH memory:
+ * + Program operations functions
+ * + Memory Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FLASH peripheral features #####
+ ==============================================================================
+ [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+ to the Flash memory. It implements the erase and program Flash memory operations
+ and the read and write protection mechanisms.
+
+ [..] The Flash memory interface accelerates code execution with a system of instruction
+ prefetch.
+
+ [..] The FLASH main features are:
+ (+) Flash memory read operations
+ (+) Flash memory program/erase operations
+ (+) Read / write protections
+ (+) Prefetch on I-Code
+ (+) Option Bytes programming
+
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver provides functions and macros to configure and program the FLASH
+ memory of all STM32F3xx devices.
+
+ (#) FLASH Memory I/O Programming functions: this group includes all needed
+ functions to erase and program the main memory:
+ (++) Lock and Unlock the FLASH interface
+ (++) Erase function: Erase page, erase all pages
+ (++) Program functions: half word, word and doubleword
+ (#) FLASH Option Bytes Programming functions: this group includes all needed
+ functions to manage the Option Bytes:
+ (++) Lock and Unlock the Option Bytes
+ (++) Set/Reset the write protection
+ (++) Set the Read protection Level
+ (++) Program the user Option Bytes
+ (++) Launch the Option Bytes loader
+ (++) Erase Option Bytes
+ (++) Program the data Option Bytes
+ (++) Get the Write protection.
+ (++) Get the user option bytes.
+
+ (#) Interrupts and flags management functions : this group
+ includes all needed functions to:
+ (++) Handle FLASH interrupts
+ (++) Wait for last FLASH operation according to its status
+ (++) Get error flag status
+
+ [..] In addition to these function, this driver includes a set of macros allowing
+ to handle the following operations:
+
+ (+) Set/Get the latency
+ (+) Enable/Disable the prefetch buffer
+ (+) Enable/Disable the half cycle access
+ (+) Enable/Disable the FLASH interrupts
+ (+) Monitor the FLASH flags status
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @defgroup FLASH FLASH
+ * @brief FLASH HAL module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macro ---------------------------- ---------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+/* Variables used for Erase pages under interruption*/
+FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void FLASH_SetErrorCode(void);
+extern void FLASH_PageErase(uint32_t PageAddress);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ * @brief Programming operation functions
+ *
+@verbatim
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Program halfword, word or double word at a specified address
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @note FLASH should be previously erased before new programmation (only exception to this
+ * is when 0x0000 is programmed)
+ *
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address Specifie the address to be programmed.
+ * @param Data Specifie the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint8_t index = 0U;
+ uint8_t nbiterations = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+ {
+ /* Program halfword (16-bit) at a specified address. */
+ nbiterations = 1U;
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+ {
+ /* Program word (32-bit = 2*16-bit) at a specified address. */
+ nbiterations = 2U;
+ }
+ else
+ {
+ /* Program double word (64-bit = 4*16-bit) at a specified address. */
+ nbiterations = 4U;
+ }
+
+ for (index = 0U; index < nbiterations; index++)
+ {
+ FLASH_Program_HalfWord((Address + (2U*index)), (uint16_t)(Data >> (16U*index)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the PG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+ /* In case of error, stop programation procedure */
+ if (status != HAL_OK)
+ {
+ break;
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Program halfword, word or double word at a specified address with interrupt enabled.
+ * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
+ *
+ * @note If an erase and a program operations are requested simultaneously,
+ * the erase operation is performed before the program one.
+ *
+ * @param TypeProgram Indicate the way to program at a specified address.
+ * This parameter can be a value of @ref FLASH_Type_Program
+ * @param Address Specifie the address to be programmed.
+ * @param Data Specifie the data to be programmed
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+ /* Enable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+ pFlash.Address = Address;
+ pFlash.Data = Data;
+
+ if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD;
+ /* Program halfword (16-bit) at a specified address. */
+ pFlash.DataRemaining = 1U;
+ }
+ else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD;
+ /* Program word (32-bit : 2*16-bit) at a specified address. */
+ pFlash.DataRemaining = 2U;
+ }
+ else
+ {
+ pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD;
+ /* Program double word (64-bit : 4*16-bit) at a specified address. */
+ pFlash.DataRemaining = 4U;
+ }
+
+ /* Program halfword (16-bit) at a specified address. */
+ FLASH_Program_HalfWord(Address, (uint16_t)Data);
+
+ return status;
+}
+
+/**
+ * @brief This function handles FLASH interrupt request.
+ * @retval None
+ */
+void HAL_FLASH_IRQHandler(void)
+{
+ uint32_t addresstmp = 0U;
+
+ /* Check FLASH operation error flags */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ /* Return the faulty address */
+ addresstmp = pFlash.Address;
+ /* Reset address */
+ pFlash.Address = 0xFFFFFFFFU;
+
+ /* Save the Error code */
+ FLASH_SetErrorCode();
+
+ /* FLASH error interrupt user callback */
+ HAL_FLASH_OperationErrorCallback(addresstmp);
+
+ /* Stop the procedure ongoing */
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+
+ /* Check FLASH End of Operation flag */
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+ /* Process can continue only if no error detected */
+ if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+ {
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
+ {
+ /* Nb of pages to erased can be decreased */
+ pFlash.DataRemaining--;
+
+ /* Check if there are still pages to erase */
+ if(pFlash.DataRemaining != 0U)
+ {
+ addresstmp = pFlash.Address;
+ /*Indicate user which sector has been erased */
+ HAL_FLASH_EndOfOperationCallback(addresstmp);
+
+ /*Increment sector number*/
+ addresstmp = pFlash.Address + FLASH_PAGE_SIZE;
+ pFlash.Address = addresstmp;
+
+ /* If the erase operation is completed, disable the PER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+ FLASH_PageErase(addresstmp);
+ }
+ else
+ {
+ /* No more pages to Erase, user callback can be called. */
+ /* Reset Sector and stop Erase pages procedure */
+ pFlash.Address = addresstmp = 0xFFFFFFFFU;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(addresstmp);
+ }
+ }
+ else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+ {
+ /* Operation is completed, disable the MER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+
+ /* MassErase ended. Return the selected bank */
+ /* FLASH EOP interrupt user callback */
+ HAL_FLASH_EndOfOperationCallback(0U);
+
+ /* Stop Mass Erase procedure*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ else
+ {
+ /* Nb of 16-bit data to program can be decreased */
+ pFlash.DataRemaining--;
+
+ /* Check if there are still 16-bit data to program */
+ if(pFlash.DataRemaining != 0U)
+ {
+ /* Increment address to 16-bit */
+ pFlash.Address += 2U;
+ addresstmp = pFlash.Address;
+
+ /* Shift to have next 16-bit data */
+ pFlash.Data = (pFlash.Data >> 16U);
+
+ /* Operation is completed, disable the PG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
+
+ /*Program halfword (16-bit) at a specified address.*/
+ FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data);
+ }
+ else
+ {
+ /* Program ended. Return the selected address */
+ /* FLASH EOP interrupt user callback */
+ if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD)
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+ }
+ else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD)
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2U);
+ }
+ else
+ {
+ HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6U);
+ }
+
+ /* Reset Address and stop Program procedure */
+ pFlash.Address = 0xFFFFFFFFU;
+ pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+ }
+ }
+ }
+ }
+
+
+ if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+ {
+ /* Operation is completed, disable the PG, PER and MER Bits */
+ CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER));
+
+ /* Disable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ }
+}
+
+/**
+ * @brief FLASH end of operation interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Mass Erase: No return value expected
+ * - Pages Erase: Address of the page which has been erased
+ * (if 0xFFFFFFFF, it means that all the selected pages have been erased)
+ * - Program: Address which was selected for data program
+ * @retval none
+ */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief FLASH operation error interrupt callback
+ * @param ReturnValue The value saved in this parameter depends on the ongoing procedure
+ * - Mass Erase: No return value expected
+ * - Pages Erase: Address of the page which returned an error
+ * - Program: Address which was selected for data program
+ * @retval none
+ */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ReturnValue);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ memory operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Unlock the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+ if (HAL_IS_BIT_SET(FLASH->CR, FLASH_CR_LOCK))
+ {
+ /* Authorize the FLASH Registers access */
+ WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+ WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Locks the FLASH control register access
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+ /* Set the LOCK Bit to lock the FLASH Registers access */
+ SET_BIT(FLASH->CR, FLASH_CR_LOCK);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Unlock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+ if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE))
+ {
+ /* Authorizes the Option Byte register programming */
+ WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
+ WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Lock the FLASH Option Control Registers access.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+ /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Launch the option byte loading.
+ * @note This function will reset automatically the MCU.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+ /* Set the OBL_Launch bit to launch the option byte loading */
+ SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
+
+ /* Wait for last operation to be completed */
+ return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions
+ * @brief Peripheral errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time errors of the FLASH peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Get the specific FLASH error flag.
+ * @retval FLASH_ErrorCode The returned value can be:
+ * @ref FLASH_Error_Codes
+ */
+uint32_t HAL_FLASH_GetError(void)
+{
+ return pFlash.ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Program a half-word (16-bit) at a specified address.
+ * @param Address specify the address to be programmed.
+ * @param Data specify the data to be programmed.
+ * @retval None
+ */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Proceed to program the new data */
+ SET_BIT(FLASH->CR, FLASH_CR_PG);
+
+ /* Write data in the address */
+ *(__IO uint16_t*)Address = Data;
+}
+
+/**
+ * @brief Wait for a FLASH operation to complete.
+ * @param Timeout maximum flash operation timeout
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+ Even if the FLASH operation fails, the BUSY flag will be reset and an error
+ flag will be set */
+
+ uint32_t tickstart = HAL_GetTick();
+
+ while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY))
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check FLASH End of Operation flag */
+ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+ {
+ /* Clear FLASH End of Operation pending bit */
+ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+ }
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
+ __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ /*Save the error code*/
+ FLASH_SetErrorCode();
+ return HAL_ERROR;
+ }
+
+ /* There is no error flag set */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Set the specific FLASH error flag.
+ * @retval None
+ */
+static void FLASH_SetErrorCode(void)
+{
+ uint32_t flags = 0U;
+
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+ flags |= FLASH_FLAG_WRPERR;
+ }
+ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
+ {
+ pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG;
+ flags |= FLASH_FLAG_PGERR;
+ }
+ /* Clear FLASH error pending bits */
+ __HAL_FLASH_CLEAR_FLAG(flags);
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c
new file mode 100644
index 00000000..211ec0cc
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c
@@ -0,0 +1,1005 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash_ex.c
+ * @author MCD Application Team
+ * @brief Extended FLASH HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the FLASH peripheral:
+ * + Extended Initialization/de-initialization functions
+ * + Extended I/O operation functions
+ * + Extended Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Flash peripheral extended features #####
+ ==============================================================================
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure and program the FLASH memory
+ of all STM32F3xxx devices. It includes
+
+ (++) Set/Reset the write protection
+ (++) Program the user Option Bytes
+ (++) Get the Read protection Level
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/** @addtogroup FLASH
+ * @{
+ */
+/** @addtogroup FLASH_Private_Variables
+ * @{
+ */
+/* Variables used for Erase pages under interruption*/
+extern FLASH_ProcessTypeDef pFlash;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx FLASHEx
+ * @brief FLASH HAL Extension module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
+ * @{
+ */
+#define FLASH_POSITION_IWDGSW_BIT (uint32_t)POSITION_VAL(FLASH_OBR_IWDG_SW)
+#define FLASH_POSITION_OB_USERDATA0_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA0)
+#define FLASH_POSITION_OB_USERDATA1_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA1)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
+ * @{
+ */
+/* Erase operations */
+static void FLASH_MassErase(void);
+void FLASH_PageErase(uint32_t PageAddress);
+
+/* Option bytes control */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
+static uint32_t FLASH_OB_GetWRP(void);
+static uint32_t FLASH_OB_GetRDP(void);
+static uint8_t FLASH_OB_GetUser(void);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions
+ * @brief FLASH Memory Erasing functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FLASH Erasing Programming functions #####
+ ==============================================================================
+
+ [..] The FLASH Memory Erasing functions, includes the following functions:
+ (+) @ref HAL_FLASHEx_Erase: return only when erase has been done
+ (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback
+ is called with parameter 0xFFFFFFFF
+
+ [..] Any operation of erase should follow these steps:
+ (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and
+ program memory access.
+ (#) Call the desired function to erase page.
+ (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access
+ (recommended to protect the FLASH memory against possible unwanted operation).
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory pages
+ * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation)
+ * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @param[out] PageError pointer to variable that
+ * contains the configuration information on faulty page in case of error
+ * (0xFFFFFFFF means that all the pages have been correctly erased)
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+ uint32_t address = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /* Mass Erase requested for Bank1 */
+ /* Wait for last operation to be completed */
+ if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
+ {
+ /*Mass erase to be done*/
+ FLASH_MassErase();
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the MER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
+ }
+ }
+ else
+ {
+ /* Page Erase is requested */
+ /* Check the parameters */
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+ assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+ /* Page Erase requested on address located on bank1 */
+ /* Wait for last operation to be completed */
+ if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
+ {
+ /*Initialization of PageError variable*/
+ *PageError = 0xFFFFFFFFU;
+
+ /* Erase page by page to be done*/
+ for(address = pEraseInit->PageAddress;
+ address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress);
+ address += FLASH_PAGE_SIZE)
+ {
+ FLASH_PageErase(address);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the PER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
+
+ if (status != HAL_OK)
+ {
+ /* In case of error, stop erase procedure and return the faulty address */
+ *PageError = address;
+ break;
+ }
+ }
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled
+ * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
+ * must be called before.
+ * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
+ * (recommended to protect the FLASH memory against possible unwanted operation)
+ * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
+ * contains the configuration information for the erasing.
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* If procedure already ongoing, reject the next one */
+ if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+ /* Enable End of FLASH Operation and Error source interrupts */
+ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
+
+ if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+ {
+ /*Mass erase to be done*/
+ pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+ FLASH_MassErase();
+ }
+ else
+ {
+ /* Erase by page to be done*/
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
+ assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
+
+ pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
+ pFlash.DataRemaining = pEraseInit->NbPages;
+ pFlash.Address = pEraseInit->PageAddress;
+
+ /*Erase 1st page and wait for IT*/
+ FLASH_PageErase(pEraseInit->PageAddress);
+ }
+
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions
+ * @brief Option Bytes Programming functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Option Bytes Programming functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the FLASH
+ option bytes operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
+{
+ uint8_t rdptmp = OB_RDP_LEVEL_0;
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Get the actual read protection Option Byte value */
+ rdptmp = FLASH_OB_GetRDP();
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* If the previous operation is completed, proceed to erase the option bytes */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the OPTER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+ if(status == HAL_OK)
+ {
+ /* Restore the last read protection Option Byte value */
+ status = FLASH_OB_RDP_LevelConfig(rdptmp);
+ }
+ }
+
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Program option bytes
+ * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ *
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval HAL_StatusTypeDef HAL Status
+ */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Process Locked */
+ __HAL_LOCK(&pFlash);
+
+ /* Check the parameters */
+ assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+ /* Write protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+ {
+ assert_param(IS_WRPSTATE(pOBInit->WRPState));
+ if (pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+ {
+ /* Enable of Write protection on the selected page */
+ status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
+ }
+ else
+ {
+ /* Disable of Write protection on the selected page */
+ status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
+ }
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* Read protection configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+ {
+ status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* USER configuration */
+ if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+ {
+ status = FLASH_OB_UserConfig(pOBInit->USERConfig);
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* DATA configuration*/
+ if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
+ {
+ status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
+ if (status != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+ return status;
+ }
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(&pFlash);
+
+ return status;
+}
+
+/**
+ * @brief Get the Option byte configuration
+ * @param pOBInit pointer to an FLASH_OBInitStruct structure that
+ * contains the configuration information for the programming.
+ *
+ * @retval None
+ */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+ pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;
+
+ /*Get WRP*/
+ pOBInit->WRPPage = FLASH_OB_GetWRP();
+
+ /*Get RDP Level*/
+ pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+ /*Get USER*/
+ pOBInit->USERConfig = FLASH_OB_GetUser();
+}
+
+/**
+ * @brief Get the Option byte user data
+ * @param DATAAdress Address of the option byte DATA
+ * This parameter can be one of the following values:
+ * @arg @ref OB_DATA_ADDRESS_DATA0
+ * @arg @ref OB_DATA_ADDRESS_DATA1
+ * @retval Value programmed in USER data
+ */
+uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress)
+{
+ uint32_t value = 0U;
+
+ if (DATAAdress == OB_DATA_ADDRESS_DATA0)
+ {
+ /* Get value programmed in OB USER Data0 */
+ value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT;
+ }
+ else
+ {
+ /* Get value programmed in OB USER Data1 */
+ value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT;
+ }
+
+ return value;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Full erase of FLASH memory Bank
+ *
+ * @retval None
+ */
+static void FLASH_MassErase(void)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Only bank1 will be erased*/
+ SET_BIT(FLASH->CR, FLASH_CR_MER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+ * @brief Enable the write protection of the desired pages
+ * @note An option byte erase is done automatically in this function.
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash page i if
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WriteProtectPage specifies the page(s) to be write protected.
+ * The value of this parameter depend on device used within the same series
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint16_t WRP0_Data = 0xFFFFU;
+#if defined(OB_WRP1_WRP1)
+ uint16_t WRP1_Data = 0xFFFFU;
+#endif /* OB_WRP1_WRP1 */
+#if defined(OB_WRP2_WRP2)
+ uint16_t WRP2_Data = 0xFFFFU;
+#endif /* OB_WRP2_WRP2 */
+#if defined(OB_WRP3_WRP3)
+ uint16_t WRP3_Data = 0xFFFFU;
+#endif /* OB_WRP3_WRP3 */
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP(WriteProtectPage));
+
+ /* Get current write protected pages and the new pages to be protected ******/
+ WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage));
+
+#if defined(OB_WRP_PAGES0TO15MASK)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+#endif /* OB_WRP_PAGES0TO31MASK */
+
+#if defined(OB_WRP_PAGES16TO31MASK)
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
+#endif /* OB_WRP_PAGES32TO63MASK */
+
+#if defined(OB_WRP_PAGES32TO47MASK)
+ WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
+#endif /* OB_WRP_PAGES32TO47MASK */
+
+#if defined(OB_WRP_PAGES48TO127MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U);
+#elif defined(OB_WRP_PAGES48TO255MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U);
+#endif /* OB_WRP_PAGES48TO63MASK */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* To be able to write again option byte, need to perform a option byte erase */
+ status = HAL_FLASHEx_OBErase();
+ if (status == HAL_OK)
+ {
+ /* Enable write protection */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(OB_WRP0_WRP0)
+ if(WRP0_Data != 0xFFU)
+ {
+ OB->WRP0 &= WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP0_WRP0 */
+
+#if defined(OB_WRP1_WRP1)
+ if((status == HAL_OK) && (WRP1_Data != 0xFFU))
+ {
+ OB->WRP1 &= WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP1_WRP1 */
+
+#if defined(OB_WRP2_WRP2)
+ if((status == HAL_OK) && (WRP2_Data != 0xFFU))
+ {
+ OB->WRP2 &= WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP2_WRP2 */
+
+#if defined(OB_WRP3_WRP3)
+ if((status == HAL_OK) && (WRP3_Data != 0xFFU))
+ {
+ OB->WRP3 &= WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP3_WRP3 */
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Disable the write protection of the desired pages
+ * @note An option byte erase is done automatically in this function.
+ * @note When the memory read protection level is selected (RDP level = 1),
+ * it is not possible to program or erase the flash page i if
+ * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
+ *
+ * @param WriteProtectPage specifies the page(s) to be write unprotected.
+ * The value of this parameter depend on device used within the same series
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint16_t WRP0_Data = 0xFFFFU;
+#if defined(OB_WRP1_WRP1)
+ uint16_t WRP1_Data = 0xFFFFU;
+#endif /* OB_WRP1_WRP1 */
+#if defined(OB_WRP2_WRP2)
+ uint16_t WRP2_Data = 0xFFFFU;
+#endif /* OB_WRP2_WRP2 */
+#if defined(OB_WRP3_WRP3)
+ uint16_t WRP3_Data = 0xFFFFU;
+#endif /* OB_WRP3_WRP3 */
+
+ /* Check the parameters */
+ assert_param(IS_OB_WRP(WriteProtectPage));
+
+ /* Get current write protected pages and the new pages to be unprotected ******/
+ WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage);
+
+#if defined(OB_WRP_PAGES0TO15MASK)
+ WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
+#endif /* OB_WRP_PAGES0TO31MASK */
+
+#if defined(OB_WRP_PAGES16TO31MASK)
+ WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
+#endif /* OB_WRP_PAGES32TO63MASK */
+
+#if defined(OB_WRP_PAGES32TO47MASK)
+ WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
+#endif /* OB_WRP_PAGES32TO47MASK */
+
+#if defined(OB_WRP_PAGES48TO127MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U);
+#elif defined(OB_WRP_PAGES48TO255MASK)
+ WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U);
+#endif /* OB_WRP_PAGES48TO63MASK */
+
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* To be able to write again option byte, need to perform a option byte erase */
+ status = HAL_FLASHEx_OBErase();
+ if (status == HAL_OK)
+ {
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(OB_WRP0_WRP0)
+ if(WRP0_Data != 0xFFU)
+ {
+ OB->WRP0 |= WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP0_WRP0 */
+
+#if defined(OB_WRP1_WRP1)
+ if((status == HAL_OK) && (WRP1_Data != 0xFFU))
+ {
+ OB->WRP1 |= WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP1_WRP1 */
+
+#if defined(OB_WRP2_WRP2)
+ if((status == HAL_OK) && (WRP2_Data != 0xFFU))
+ {
+ OB->WRP2 |= WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP2_WRP2 */
+
+#if defined(OB_WRP3_WRP3)
+ if((status == HAL_OK) && (WRP3_Data != 0xFFU))
+ {
+ OB->WRP3 |= WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+ }
+#endif /* OB_WRP3_WRP3 */
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ }
+ return status;
+}
+
+/**
+ * @brief Set the read protection level.
+ * @param ReadProtectLevel specifies the read protection level.
+ * This parameter can be one of the following values:
+ * @arg @ref OB_RDP_LEVEL_0 No protection
+ * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
+ * @arg @ref OB_RDP_LEVEL_2 Full chip protection
+ * @note Warning: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* If the previous operation is completed, proceed to erase the option bytes */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTER);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the erase operation is completed, disable the OPTER Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
+
+ if(status == HAL_OK)
+ {
+ /* Enable the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+ WRITE_REG(OB->RDP, ReadProtectLevel);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Program the FLASH User Option Byte.
+ * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+ * @param UserConfig The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4),
+ * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
+ * And SDADC12_VDD_MONITOR(Bit7) for STM32F373 or STM32F378 .
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW)));
+ assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
+ assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
+ assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
+ assert_param(IS_OB_VDDA_ANALOG((UserConfig&OB_VDDA_ANALOG_ON)));
+ assert_param(IS_OB_SRAM_PARITY((UserConfig&OB_SRAM_PARITY_RESET)));
+#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
+ assert_param(IS_OB_SDACD_VDD_MONITOR((UserConfig&OB_SDACD_VDD_MONITOR_SET)));
+#endif /* FLASH_OBR_SDADC12_VDD_MONITOR */
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Enable the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+
+#if defined(FLASH_OBR_SDADC12_VDD_MONITOR)
+ OB->USER = (UserConfig | 0x08U);
+#else
+ OB->USER = (UserConfig | 0x88U);
+#endif
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* if the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
+ * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
+ * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
+ * (system reset will occur)
+ * Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
+ * @param Address specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data specifies the data to be programmed.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
+{
+ HAL_StatusTypeDef status = HAL_ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ if(status == HAL_OK)
+ {
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Enables the Option Bytes Programming operation */
+ SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+ /* If the program operation is completed, disable the OPTPG Bit */
+ CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Return the FLASH Write Protection Option Bytes value.
+ * @retval The FLASH Write Protection Option Bytes value
+ */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+ /* Return the FLASH write protection Register value */
+ return (uint32_t)(READ_REG(FLASH->WRPR));
+}
+
+/**
+ * @brief Returns the FLASH Read Protection level.
+ * @retval FLASH RDP level
+ * This parameter can be one of the following values:
+ * @arg @ref OB_RDP_LEVEL_0 No protection
+ * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
+ * @arg @ref OB_RDP_LEVEL_2 Full chip protection
+ */
+static uint32_t FLASH_OB_GetRDP(void)
+{
+ uint32_t tmp_reg = 0U;
+
+ /* Read RDP level bits */
+#if defined(FLASH_OBR_RDPRT)
+ tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT);
+#endif
+#if defined(FLASH_OBR_LEVEL1_PROT)
+ tmp_reg = READ_BIT(FLASH->OBR, (FLASH_OBR_LEVEL1_PROT | FLASH_OBR_LEVEL2_PROT));
+#endif /* FLASH_OBR_LEVEL1_PROT */
+
+#if defined(FLASH_OBR_RDPRT)
+ if (tmp_reg == FLASH_OBR_RDPRT_1)
+#endif
+#if defined(FLASH_OBR_LEVEL1_PROT)
+ if (tmp_reg == FLASH_OBR_LEVEL1_PROT)
+#endif /* FLASH_OBR_LEVEL1_PROT */
+ {
+ return OB_RDP_LEVEL_1;
+ }
+#if defined(FLASH_OBR_RDPRT)
+ else if (tmp_reg == FLASH_OBR_RDPRT_2)
+#elif defined(FLASH_OBR_LEVEL2_PROT)
+ else if (tmp_reg == FLASH_OBR_LEVEL2_PROT)
+#endif
+ {
+ return OB_RDP_LEVEL_2;
+ }
+ else
+ {
+ return OB_RDP_LEVEL_0;
+ }
+}
+
+/**
+ * @brief Return the FLASH User Option Byte value.
+ * @retval The FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1), RST_STDBY(Bit2), nBOOT1(Bit4),
+ * VDDA_Analog_Monitoring(Bit5) and SRAM_Parity_Enable(Bit6).
+ * And SDADC12_VDD_MONITOR(Bit7) for STM32F373 or STM32F378 .
+ */
+static uint8_t FLASH_OB_GetUser(void)
+{
+ /* Return the User Option Byte */
+ return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Erase the specified FLASH memory page
+ * @param PageAddress FLASH page to erase
+ * The value of this parameter depend on device used within the same series
+ *
+ * @retval None
+ */
+void FLASH_PageErase(uint32_t PageAddress)
+{
+ /* Clean the error context */
+ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+ /* Proceed to erase the page */
+ SET_BIT(FLASH->CR, FLASH_CR_PER);
+ WRITE_REG(FLASH->AR, PageAddress);
+ SET_BIT(FLASH->CR, FLASH_CR_STRT);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c
new file mode 100644
index 00000000..d935fcd7
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_gpio.c
@@ -0,0 +1,547 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio.c
+ * @author MCD Application Team
+ * @brief GPIO HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the General Purpose Input/Output (GPIO) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### GPIO Peripheral features #####
+ ==============================================================================
+ [..]
+ (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
+ configured by software in several modes:
+ (++) Input mode
+ (++) Analog mode
+ (++) Output mode
+ (++) Alternate function mode
+ (++) External interrupt/event lines
+
+ (+) During and just after reset, the alternate functions and external interrupt
+ lines are not active and the I/O ports are configured in input floating mode.
+
+ (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+ activated or not.
+
+ (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+ type and the IO speed can be selected depending on the VDD value.
+
+ (+) The microcontroller IO pins are connected to onboard peripherals/modules through a
+ multiplexer that allows only one peripheral alternate function (AF) connected
+ to an IO pin at a time. In this way, there can be no conflict between peripherals
+ sharing the same IO pin.
+
+ (+) All ports have external interrupt/event capability. To use external interrupt
+ lines, the port must be configured in input mode. All available GPIO pins are
+ connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+ (+) The external interrupt/event controller consists of up to 23 edge detectors
+ (16 lines are connected to GPIO) for generating event/interrupt requests (each
+ input line can be independently configured to select the type (interrupt or event)
+ and the corresponding trigger event (rising or falling or both). Each line can
+ also be masked independently.
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+ (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+ (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+ (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+ structure.
+ (++) In case of Output or alternate function mode selection: the speed is
+ configured through "Speed" member from GPIO_InitTypeDef structure.
+ (++) In alternate mode is selection, the alternate function connected to the IO
+ is configured through "Alternate" member from GPIO_InitTypeDef structure.
+ (++) Analog mode is required when a pin is to be used as ADC channel
+ or DAC output.
+ (++) In case of external interrupt/event selection the "Mode" member from
+ GPIO_InitTypeDef structure select the type (interrupt or event) and
+ the corresponding trigger event (rising or falling or both).
+
+ (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+ mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+ HAL_NVIC_EnableIRQ().
+
+ (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+ (#) To set/reset the level of a pin configured in output mode use
+ HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+ (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+ (#) During and just after reset, the alternate functions are not
+ active and the GPIO pins are configured in input floating mode (except JTAG
+ pins).
+
+ (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+ (PC14 and PC15U, respectively) when the LSE oscillator is off. The LSE has
+ priority over the GPIO function.
+
+ (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ general purpose PF0 and PF1, respectively, when the HSE oscillator is off.
+ The HSE has priority over the GPIO function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIO GPIO
+ * @brief GPIO HAL module driver
+ * @{
+ */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup GPIO_Private_Defines GPIO Private Defines
+ * @{
+ */
+#define GPIO_MODE (0x00000003U)
+#define EXTI_MODE (0x10000000U)
+#define GPIO_MODE_IT (0x00010000U)
+#define GPIO_MODE_EVT (0x00020000U)
+#define RISING_EDGE (0x00100000U)
+#define FALLING_EDGE (0x00200000U)
+#define GPIO_OUTPUT_TYPE (0x00000010U)
+
+#define GPIO_NUMBER (16U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family devices
+ * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+ uint32_t position = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t temp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+ assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Configure the port pins */
+ while (((GPIO_Init->Pin) >> position) != RESET)
+ {
+ /* Get current io position */
+ iocurrent = (GPIO_Init->Pin) & (1U << position);
+
+ if(iocurrent)
+ {
+ /*--------------------- GPIO Mode Configuration ------------------------*/
+ /* In case of Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Alternate function parameters */
+ assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+ /* Configure Alternate function mapped with the current IO */
+ temp = GPIOx->AFR[position >> 3];
+ temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+ temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U));
+ GPIOx->AFR[position >> 3] = temp;
+ }
+
+ /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+ temp = GPIOx->MODER;
+ temp &= ~(GPIO_MODER_MODER0 << (position * 2U));
+ temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
+ GPIOx->MODER = temp;
+
+ /* In case of Output or Alternate function mode selection */
+ if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+ (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ {
+ /* Check the Speed parameter */
+ assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+ /* Configure the IO Speed */
+ temp = GPIOx->OSPEEDR;
+ temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+ temp |= (GPIO_Init->Speed << (position * 2U));
+ GPIOx->OSPEEDR = temp;
+
+ /* Configure the IO Output Type */
+ temp = GPIOx->OTYPER;
+ temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+ temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
+ GPIOx->OTYPER = temp;
+ }
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+ temp |= ((GPIO_Init->Pull) << (position * 2U));
+ GPIOx->PUPDR = temp;
+
+ /*--------------------- EXTI Mode Configuration ------------------------*/
+ /* Configure the External Interrupt or event for the current IO */
+ if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ {
+ /* Enable SYSCFG Clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ temp = SYSCFG->EXTICR[position >> 2];
+ temp &= ~((0x0FU) << (4U * (position & 0x03U)));
+ temp |= (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U)));
+ SYSCFG->EXTICR[position >> 2] = temp;
+
+ /* Clear EXTI line configuration */
+ temp = EXTI->IMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->IMR = temp;
+
+ temp = EXTI->EMR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->EMR = temp;
+
+ /* Clear Rising Falling edge configuration */
+ temp = EXTI->RTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->RTSR = temp;
+
+ temp = EXTI->FTSR;
+ temp &= ~((uint32_t)iocurrent);
+ if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ {
+ temp |= iocurrent;
+ }
+ EXTI->FTSR = temp;
+ }
+ }
+
+ position++;
+ }
+}
+
+/**
+ * @brief De-initialize the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F30X device or STM32F37X device
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @retval None
+ */
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
+{
+ uint32_t position = 0x00U;
+ uint32_t iocurrent = 0x00U;
+ uint32_t tmp = 0x00U;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Configure the port pins */
+ while ((GPIO_Pin >> position) != RESET)
+ {
+ /* Get current io position */
+ iocurrent = GPIO_Pin & (1U << position);
+
+ if (iocurrent)
+ {
+ /*------------------------- GPIO Mode Configuration --------------------*/
+ /* Configure IO Direction in Input Floting Mode */
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
+
+ /* Configure the default Alternate Function in current IO */
+ GPIOx->AFR[position >> 3] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+
+ /* Configure the default value for IO Speed */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+
+ /* Configure the default value IO Output Type */
+ GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+ /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+
+
+ /*------------------------- EXTI Mode Configuration --------------------*/
+ /* Clear the External Interrupt or Event for the current IO */
+
+ tmp = SYSCFG->EXTICR[position >> 2];
+ tmp &= ((0x0FU) << (4U * (position & 0x03U)));
+ if(tmp == (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U))))
+ {
+ tmp = (0x0FU) << (4U * (position & 0x03U));
+ SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~((uint32_t)iocurrent);
+ EXTI->EMR &= ~((uint32_t)iocurrent);
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~((uint32_t)iocurrent);
+ EXTI->FTSR &= ~((uint32_t)iocurrent);
+ }
+ }
+
+ position++;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Read the specified input port pin.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the port bit to read.
+ * This parameter can be GPIO_PIN_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ GPIO_PinState bitstatus;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+ {
+ bitstatus = GPIO_PIN_SET;
+ }
+ else
+ {
+ bitstatus = GPIO_PIN_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Set or clear the selected data port bit.
+ *
+ * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ *
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the port bit to be written.
+ * This parameter can be one of GPIO_PIN_x where x can be (0..15).
+ * @param PinState specifies the value to be written to the selected bit.
+ * This parameter can be one of the GPIO_PinState enum values:
+ * @arg GPIO_PIN_RESET: to clear the port pin
+ * @arg GPIO_PIN_SET: to set the port pin
+ * @retval None
+ */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+ if(PinState != GPIO_PIN_RESET)
+ {
+ GPIOx->BSRR = (uint32_t)GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BRR = (uint32_t)GPIO_Pin;
+ }
+}
+
+/**
+ * @brief Toggle the specified GPIO pin.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the pin to be toggled.
+ * @retval None
+ */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+* @brief Lock GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F3 family
+ * @param GPIO_Pin specifies the port bits to be locked.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ /* Apply lock key write sequence */
+ tmp |= GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15U-0] */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKx bit(s): LCKK='0' + LCK[15U-0] */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKx bit(s): LCKK='1' + LCK[15U-0] */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+ {
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Handle EXTI interrupt request.
+ * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+ * @retval None
+ */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+ /* EXTI line interrupt detected */
+ if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+ {
+ __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+ HAL_GPIO_EXTI_Callback(GPIO_Pin);
+ }
+}
+
+/**
+ * @brief EXTI line detection callback.
+ * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+ * @retval None
+ */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(GPIO_Pin);
+
+ /* NOTE: This function should not be modified, when the callback is needed,
+ the HAL_GPIO_EXTI_Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c
new file mode 100644
index 00000000..7328bf6c
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c
@@ -0,0 +1,4868 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c.c
+ * @author MCD Application Team
+ * @brief I2C HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (I2C) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral State and Errors functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The I2C HAL driver can be used as follows:
+
+ (#) Declare a I2C_HandleTypeDef handle structure, for example:
+ I2C_HandleTypeDef hi2c;
+
+ (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API:
+ (##) Enable the I2Cx interface clock
+ (##) I2C pins configuration
+ (+++) Enable the clock for the I2C GPIOs
+ (+++) Configure I2C pins as alternate function open-drain
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the I2Cx interrupt priority
+ (+++) Enable the NVIC I2C IRQ Channel
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Enable the DMAx interface clock using
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx channel
+ (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
+ the DMA Tx or Rx channel
+
+ (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+ Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+ (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
+ (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
+
+ (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+ (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+ *** Polling mode IO operation ***
+ =================================
+ [..]
+ (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+ (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+ (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+ (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+ *** Polling mode IO MEM operation ***
+ =====================================
+ [..]
+ (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+ (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+ *** Interrupt mode IO operation ***
+ ===================================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+
+ *** Interrupt mode IO sequential operation ***
+ ==============================================
+ [..]
+ (@) These interfaces allow to manage a sequential transfer with a repeated start condition
+ when a direction change during transfer
+ [..]
+ (+) A specific option field manage the different steps of a sequential transfer
+ (+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition
+ (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
+ and data to transfer without a final stop condition, an then permit a call the same master sequential interface
+ several times (like HAL_I2C_Master_Sequential_Transmit_IT() then HAL_I2C_Master_Sequential_Transmit_IT())
+ (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and without a final stop condition in both cases
+ (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
+ and with new data to transfer if the direction change or manage only the new data to transfer
+ if no direction change and with a final stop condition in both cases
+
+ (+) Differents sequential I2C interfaces are listed below:
+ (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT()
+ (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can
+ add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
+ (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ListenCpltCallback()
+ (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Transmit_IT()
+ (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Sequential_Receive_IT()
+ (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (++) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** Interrupt mode IO MEM operation ***
+ =======================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
+ HAL_I2C_Mem_Write_IT()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
+ HAL_I2C_Mem_Read_IT()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+ *** DMA mode IO operation ***
+ ==============================
+ [..]
+ (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback()
+ (+) Receive in master mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Master_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback()
+ (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Transmit_DMA()
+ (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback()
+ (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
+ HAL_I2C_Slave_Receive_DMA()
+ (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+ (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT()
+ (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_AbortCpltCallback()
+ (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro.
+ This action will inform Master to generate a Stop condition to discard the communication.
+
+ *** DMA mode IO MEM operation ***
+ =================================
+ [..]
+ (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
+ HAL_I2C_Mem_Write_DMA()
+ (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback()
+ (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
+ HAL_I2C_Mem_Read_DMA()
+ (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can
+ add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+ add his own code by customization of function pointer HAL_I2C_ErrorCallback()
+
+
+ *** I2C HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in I2C HAL driver.
+
+ (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+ (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+ (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode
+ (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not
+ (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
+ (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+ (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+ [..]
+ (@) You can refer to the I2C HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2C I2C
+ * @brief I2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup I2C_Private_Define I2C Private Define
+ * @{
+ */
+#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */
+#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */
+#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */
+
+#define MAX_NBYTE_SIZE 255U
+#define SlaveAddr_SHIFT 7U
+#define SlaveAddr_MSK 0x06U
+
+/* Private define for @ref PreviousState usage */
+#define I2C_STATE_MSK ((uint32_t)((HAL_I2C_STATE_BUSY_TX | HAL_I2C_STATE_BUSY_RX) & (~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_TX ((uint32_t)((HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_RX ((uint32_t)((HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+
+
+/* Private define to centralize the enable/disable of Interrupts */
+#define I2C_XFER_TX_IT (0x00000001U)
+#define I2C_XFER_RX_IT (0x00000002U)
+#define I2C_XFER_LISTEN_IT (0x00000004U)
+
+#define I2C_XFER_ERROR_IT (0x00000011U)
+#define I2C_XFER_CPLT_IT (0x00000012U)
+#define I2C_XFER_RELOAD_IT (0x00000012U)
+
+/* Private define Sequential Transfer Options default/reset value */
+#define I2C_NO_OPTION_FRAME (0xFFFF0000U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) ((((__HANDLE__)->State) == HAL_I2C_STATE_BUSY_TX) ? \
+ ((uint32_t)((__HANDLE__)->hdmatx->Instance->CNDTR)) : \
+ ((uint32_t)((__HANDLE__)->hdmarx->Instance->CNDTR)))
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions to handle DMA transfer */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
+
+/* Private functions to handle IT transfer */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c);
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
+
+/* Private functions to handle IT transfer */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions for I2C transfer IRQ handler */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+
+/* Private functions to handle flags during polling transfer */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+
+/* Private functions to centralize the enable/disable of Interrupts */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
+
+/* Private functions to flush TXDR register */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
+
+/* Private functions to handle start, restart or stop a transfer */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ deinitialize the I2Cx peripheral:
+
+ (+) User must Implement HAL_I2C_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_I2C_Init() to configure the selected device with
+ the selected configuration:
+ (++) Clock Timing
+ (++) Own Address 1
+ (++) Addressing mode (Master, Slave)
+ (++) Dual Addressing mode
+ (++) Own Address 2
+ (++) Own Address 2 Mask
+ (++) General call mode
+ (++) Nostretch mode
+
+ (+) Call the function HAL_I2C_DeInit() to restore the default configuration
+ of the selected I2Cx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the I2C according to the specified parameters
+ * in the I2C_InitTypeDef and initialize the associated handle.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+ assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+ assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+ assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+ assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+ assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+ assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+ if (hi2c->State == HAL_I2C_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hi2c->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_I2C_MspInit(hi2c);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+ /* Configure I2Cx: Frequency range */
+ hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+
+ /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+ /* Disable Own Address1 before set the Own Address1 configuration */
+ hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+
+ /* Configure I2Cx: Own Address1 and ack own address1 mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+ }
+ else /* I2C_ADDRESSINGMODE_10BIT */
+ {
+ hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+ }
+
+ /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+ /* Configure I2Cx: Addressing Master mode */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+ }
+ /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+ hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+
+ /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+ /* Disable Own Address2 before set the Own Address2 configuration */
+ hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
+
+ /* Configure I2Cx: Dual mode and Own Address2 */
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+ /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+ /* Configure I2Cx: Generalcall and NoStretch mode */
+ hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+
+ /* Enable the selected I2C peripheral */
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the I2C peripheral.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the I2C handle allocation */
+ if (hi2c == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the I2C Peripheral Clock */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_I2C_MspDeInit(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_RESET;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize the I2C MSP.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the I2C data
+ transfers.
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode : The communication is performed in the polling mode.
+ The status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode : The communication is performed using Interrupts
+ or DMA. These functions return the status of the transfer startup.
+ The end of the data processing will be indicated through the
+ dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+
+ (#) Blocking mode functions are :
+ (++) HAL_I2C_Master_Transmit()
+ (++) HAL_I2C_Master_Receive()
+ (++) HAL_I2C_Slave_Transmit()
+ (++) HAL_I2C_Slave_Receive()
+ (++) HAL_I2C_Mem_Write()
+ (++) HAL_I2C_Mem_Read()
+ (++) HAL_I2C_IsDeviceReady()
+
+ (#) No-Blocking mode functions with Interrupt are :
+ (++) HAL_I2C_Master_Transmit_IT()
+ (++) HAL_I2C_Master_Receive_IT()
+ (++) HAL_I2C_Slave_Transmit_IT()
+ (++) HAL_I2C_Slave_Receive_IT()
+ (++) HAL_I2C_Mem_Write_IT()
+ (++) HAL_I2C_Mem_Read_IT()
+
+ (#) No-Blocking mode functions with DMA are :
+ (++) HAL_I2C_Master_Transmit_DMA()
+ (++) HAL_I2C_Master_Receive_DMA()
+ (++) HAL_I2C_Slave_Transmit_DMA()
+ (++) HAL_I2C_Slave_Receive_DMA()
+ (++) HAL_I2C_Mem_Write_DMA()
+ (++) HAL_I2C_Mem_Read_DMA()
+
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (++) HAL_I2C_MemTxCpltCallback()
+ (++) HAL_I2C_MemRxCpltCallback()
+ (++) HAL_I2C_MasterTxCpltCallback()
+ (++) HAL_I2C_MasterRxCpltCallback()
+ (++) HAL_I2C_SlaveTxCpltCallback()
+ (++) HAL_I2C_SlaveRxCpltCallback()
+ (++) HAL_I2C_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receives in master mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmits in slave mode an amount of data in blocking mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* If 10bit addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Wait until DIR flag is set Transmitter mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Normal use case for Transmitter mode */
+ /* A NACK is generated to confirm the end of transfer */
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in blocking mode
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Wait until ADDR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Wait until DIR flag is reset Receiver mode */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ while (hi2c->XferCount > 0U)
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Store Last receive data if any */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+ {
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferCount--;
+ }
+
+ /* Wait until STOP flag is set */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Wait until BUSY flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+ return HAL_TIMEOUT;
+ }
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in master mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+ uint32_t xfermode = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ if (hi2c->XferSize > 0U)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ /* Update Transfer ISR function pointer */
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* Send Slave Address */
+ /* Set NBYTES to read and generate START condition */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive in slave mode an amount of data in non-blocking mode with DMA
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Slave_ISR_DMA;
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR, STOP, NACK, ADDR interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in blocking mode to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+
+ do
+ {
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in blocking mode from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferISR = NULL;
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ }
+
+ do
+ {
+ /* Wait until RXNE flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ while (hi2c->XferCount > 0U);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+
+ /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+ /* possible to enable all of these */
+ /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+/**
+ * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Send Slave Address */
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+ uint32_t tickstart = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MEM;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferISR = I2C_Master_ISR_DMA;
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Send Slave Address and Memory Address */
+ if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+
+ /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Enable DMA Request */
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* Enable ERR and NACK interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param Trials Number of trials
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ __IO uint32_t I2C_Trials = 0U;
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ do
+ {
+ /* Generate Start */
+ hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress);
+
+ /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+ /* Wait until STOPF flag is set or a NACK flag is set*/
+ tickstart = HAL_GetTick();
+ while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && (hi2c->State != HAL_I2C_STATE_TIMEOUT))
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Check if the NACKF flag has not been set */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Device is ready */
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag, auto generated with autoend*/
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+
+ /* Check if the maximum allowed number of trials has been reached */
+ if (I2C_Trials++ == Trials)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+
+ /* Wait until STOPF flag is reset */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+ }
+ }
+ while (I2C_Trials < Trials);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt.
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_WRITE;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If size > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to write */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ uint32_t xfermode = 0U;
+ uint32_t xferrequest = I2C_GENERATE_START_READ;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX;
+ hi2c->Mode = HAL_I2C_MODE_MASTER;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Master_ISR_IT;
+
+ /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = hi2c->XferOptions;
+ }
+
+ /* If transfer direction not change, do not generate Restart Condition */
+ /* Mean Previous state is same as current state */
+ if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX)
+ {
+ xferrequest = I2C_NO_STARTSTOP;
+ }
+
+ /* Send Slave Address and set NBYTES to read */
+ I2C_TransferConfig(hi2c, DevAddress, hi2c->XferSize, xfermode, xferrequest);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave RX state to TX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
+ * @note This interface allow to manage repeated start condition when a direction change during transfer
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param pData Pointer to data buffer
+ * @param Size Amount of data to be sent
+ * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable Interrupts, to prevent preemption during treatment in case of multicall */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
+ /* and then toggle the HAL slave TX state to RX state */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Disable associated Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+ }
+
+ hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_SLAVE;
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+ /* Enable Address Acknowledge */
+ hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+
+ /* Prepare transfer parameters */
+ hi2c->pBuffPtr = pData;
+ hi2c->XferCount = Size;
+ hi2c->XferSize = hi2c->XferCount;
+ hi2c->XferOptions = XferOptions;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
+ {
+ /* Clear ADDR flag after prepare the transfer parameters */
+ /* This action will generate an acknowledge to the Master */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ /* REnable ADDR interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Enable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+
+ /* Enable the Address Match interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable the Address listen mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
+{
+ /* Declaration of tmp to prevent undefined behavior of volatile usage */
+ uint32_t tmp;
+
+ /* Disable Address listen mode only if a transfer is not ongoing */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
+ hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Disable the Address Match interrupt */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Abort a master I2C IT or DMA process communication with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
+{
+ if (hi2c->Mode == HAL_I2C_MODE_MASTER)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Set State at HAL_I2C_STATE_ABORT */
+ hi2c->State = HAL_I2C_STATE_ABORT;
+
+ /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */
+ /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
+ I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Note : The I2C interrupts must be enabled after unlocking current process
+ to avoid the risk of I2C interrupt handle execution before current
+ process unlock */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Wrong usage of abort function */
+ /* This function should be used only in case of abort monitored by master device */
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+
+/**
+ * @brief This function handles I2C event interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ /* Get current IT Flags and IT sources value */
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C events treatment -------------------------------------*/
+ if (hi2c->XferISR != NULL)
+ {
+ hi2c->XferISR(hi2c, itflags, itsources);
+ }
+}
+
+/**
+ * @brief This function handles I2C error interrupt request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+ uint32_t itflags = READ_REG(hi2c->Instance->ISR);
+ uint32_t itsources = READ_REG(hi2c->Instance->CR1);
+
+ /* I2C Bus error interrupt occurred ------------------------------------*/
+ if (((itflags & I2C_FLAG_BERR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+
+ /* Clear BERR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+ }
+
+ /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+ if (((itflags & I2C_FLAG_OVR) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+
+ /* Clear OVR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+ }
+
+ /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+ if (((itflags & I2C_FLAG_ARLO) != RESET) && ((itsources & I2C_IT_ERRI) != RESET))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+
+ /* Clear ARLO flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+ }
+
+ /* Call the Error Callback in case of Error detected */
+ if ((hi2c->ErrorCode & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE)
+ {
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+}
+
+/**
+ * @brief Master Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Master Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MasterRxCpltCallback could be implemented in the user file
+ */
+}
+
+/** @brief Slave Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Slave Address Match callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION
+ * @param AddrMatchCode Address Match Code
+ * @retval None
+ */
+__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+ UNUSED(TransferDirection);
+ UNUSED(AddrMatchCode);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AddrCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Listen Complete callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ListenCpltCallback() could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Tx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemTxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Memory Rx Transfer completed callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_MemRxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C error callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief I2C abort callback.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval None
+ */
+__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hi2c);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_I2C_AbortCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @brief Peripheral State, Mode and Error functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State, Mode and Error functions #####
+ ===============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the I2C handle state.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @retval HAL state
+ */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+ /* Return I2C handle state */
+ return hi2c->State;
+}
+
+/**
+ * @brief Returns the I2C Master, Slave, Memory or no mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for I2C module
+ * @retval HAL mode
+ */
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->Mode;
+}
+
+/**
+* @brief Return the I2C error code.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+ return hi2c->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ /* No need to generate STOP, it is automatically done */
+ /* Error callback will be send during stop flag treatment */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if ((hi2c->XferSize == 0U) && (hi2c->XferCount != 0U))
+ {
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
+ }
+ else
+ {
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ }
+ }
+ }
+ else
+ {
+ /* Call TxCpltCallback() if no stop mode is set */
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_TC) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ if (hi2c->XferCount == 0U)
+ {
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Generate a stop condition in case of no transfer option */
+ if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
+ else
+ {
+ /* Call I2C Master Sequential complete process */
+ I2C_ITMasterSequentialCplt(hi2c);
+ }
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TC flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0*/
+ /* So clear Flag NACKF only */
+ if (hi2c->XferCount == 0U)
+ {
+ if (((hi2c->XferOptions == I2C_FIRST_AND_LAST_FRAME) || (hi2c->XferOptions == I2C_LAST_FRAME)) && \
+ (hi2c->State == HAL_I2C_STATE_LISTEN))
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ else if ((hi2c->XferOptions != I2C_NO_OPTION_FRAME) && (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ else
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_RXNE) != RESET) && ((ITSources & I2C_IT_RXI) != RESET))
+ {
+ if (hi2c->XferCount > 0U)
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+ }
+
+ if ((hi2c->XferCount == 0U) && \
+ (hi2c->XferOptions != I2C_NO_OPTION_FRAME))
+ {
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ I2C_ITAddrCplt(hi2c, ITFlags);
+ }
+ else if (((ITFlags & I2C_FLAG_TXIS) != RESET) && ((ITSources & I2C_IT_TXI) != RESET))
+ {
+ /* Write data to TXDR only if XferCount not reach "0" */
+ /* A TXIS flag can be set, during STOP treatment */
+ /* Check if all Datas have already been sent */
+ /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
+ if (hi2c->XferCount > 0U)
+ {
+ /* Write data to TXDR */
+ hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+ hi2c->XferCount--;
+ hi2c->XferSize--;
+ }
+ else
+ {
+ if ((hi2c->XferOptions == I2C_NEXT_FRAME) || (hi2c->XferOptions == I2C_FIRST_FRAME))
+ {
+ /* Last Byte is Transmitted */
+ /* Call I2C Slave Sequential complete process */
+ I2C_ITSlaveSequentialCplt(hi2c);
+ }
+ }
+ }
+
+ /* Check if STOPF is set */
+ if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ uint16_t devaddress = 0U;
+ uint32_t xfermode = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set corresponding Error Code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+
+ /* No need to generate STOP, it is automatically done */
+ /* But enable STOP interrupt, to treat it */
+ /* Error callback will be send during stop flag treatment */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+ }
+ else if (((ITFlags & I2C_FLAG_TCR) != RESET) && ((ITSources & I2C_IT_TCI) != RESET))
+ {
+ /* Disable TC interrupt */
+ __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
+
+ if (hi2c->XferCount != 0U)
+ {
+ /* Recover Slave address */
+ devaddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+
+ /* Prepare the new XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ xfermode = I2C_RELOAD_MODE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ xfermode = I2C_AUTOEND_MODE;
+ }
+
+ /* Set the new XferSize in Nbytes register */
+ I2C_TransferConfig(hi2c, devaddress, hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
+
+ /* Update XferCount value */
+ hi2c->XferCount -= hi2c->XferSize;
+
+ /* Enable DMA Request */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+ }
+ else
+ {
+ hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+ }
+ }
+ else
+ {
+ /* Wrong size Status regarding TCR flag event */
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Master complete process */
+ I2C_ITMasterCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param ITFlags Interrupt flags to handle.
+ * @param ITSources Interrupt sources enabled.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+{
+ /* Process locked */
+ __HAL_LOCK(hi2c);
+
+ if (((ITFlags & I2C_FLAG_AF) != RESET) && ((ITSources & I2C_IT_NACKI) != RESET))
+ {
+ /* Check that I2C transfer finished */
+ /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
+ /* Mean XferCount == 0 */
+ /* So clear Flag NACKF only */
+ if (I2C_GET_DMA_REMAIN_DATA(hi2c) == 0U)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+ }
+ else
+ {
+ /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+ else if (((ITFlags & I2C_FLAG_ADDR) != RESET) && ((ITSources & I2C_IT_ADDRI) != RESET))
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ }
+ else if (((ITFlags & I2C_FLAG_STOPF) != RESET) && ((ITSources & I2C_IT_STOPI) != RESET))
+ {
+ /* Call I2C Slave complete process */
+ I2C_ITSlaveCplt(hi2c, ITFlags);
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for write request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TCR flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Master sends target device address followed by internal memory address for read request.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param DevAddress Target device address: The device 7 bits address value
+ * in datasheet must be shift at right before call interface
+ * @param MemAddress Internal memory address
+ * @param MemAddSize Size of internal memory address
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+{
+ I2C_TransferConfig(hi2c, DevAddress, MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* If Memory address size is 8Bit */
+ if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
+ {
+ /* Send Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+ /* If Memory address size is 16Bit */
+ else
+ {
+ /* Send MSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
+
+ /* Wait until TXIS flag is set */
+ if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send LSB of Memory Address */
+ hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
+ }
+
+ /* Wait until TC flag is set */
+ if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief I2C Address complete process callback.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ uint8_t transferdirection = 0U;
+ uint16_t slaveaddrcode = 0U;
+ uint16_t ownadd1code = 0U;
+ uint16_t ownadd2code = 0U;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(ITFlags);
+
+ /* In case of Listen state, need to inform upper layer of address match code event */
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) == HAL_I2C_STATE_LISTEN)
+ {
+ transferdirection = I2C_GET_DIR(hi2c);
+ slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c);
+ ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c);
+ ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c);
+
+ /* If 10bits addressing mode is selected */
+ if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+ {
+ if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ {
+ slaveaddrcode = ownadd1code;
+ hi2c->AddrEventCount++;
+ if (hi2c->AddrEventCount == 2U)
+ {
+ /* Reset Address Event counter */
+ hi2c->AddrEventCount = 0U;
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ else
+ {
+ slaveaddrcode = ownadd2code;
+
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* else 7 bits addressing mode is selected */
+ else
+ {
+ /* Disable ADDR Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call Slave Addr callback */
+ HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
+ }
+ }
+ /* Else clear address flag only */
+ else
+ {
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITMasterSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* No Generate Stop, to permit restart mode */
+ /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
+ hi2c->XferISR = NULL;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Slave sequential complete process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_ITSlaveSequentialCplt(I2C_HandleTypeDef *hi2c)
+{
+ /* Reset I2C handle mode */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Tx complete callback to inform upper layer of the end of transmit process */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
+ {
+ /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Rx complete callback to inform upper layer of the end of receive process */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Master complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Reset handle parameters */
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+
+ if ((ITFlags & I2C_FLAG_AF) != RESET)
+ {
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Set acknowledge error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Disable Interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ if ((hi2c->ErrorCode != HAL_I2C_ERROR_NONE) || (hi2c->State == HAL_I2C_STATE_ABORT))
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_TX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MemTxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_MasterTxCpltCallback(hi2c);
+ }
+ }
+ /* hi2c->State == HAL_I2C_STATE_BUSY_RX */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MemRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ HAL_I2C_MasterRxCpltCallback(hi2c);
+ }
+ }
+}
+
+/**
+ * @brief I2C Slave complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear ADDR flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT);
+
+ /* Disable Address Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* If a DMA is ongoing, Update handle size context */
+ if (((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) ||
+ ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN))
+ {
+ hi2c->XferCount = I2C_GET_DMA_REMAIN_DATA(hi2c);
+ }
+
+ /* All data are not transferred, so set error code accordingly */
+ if (hi2c->XferCount != 0U)
+ {
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, hi2c->ErrorCode);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ if (hi2c->State == HAL_I2C_STATE_LISTEN)
+ {
+ /* Call I2C Listen complete process */
+ I2C_ITListenCplt(hi2c, ITFlags);
+ }
+ }
+ else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
+ {
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+ }
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Rx Complete callback */
+ HAL_I2C_SlaveRxCpltCallback(hi2c);
+ }
+ else
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Slave Tx Complete callback */
+ HAL_I2C_SlaveTxCpltCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Listen complete process.
+ * @param hi2c I2C handle.
+ * @param ITFlags Interrupt flags to handle.
+ * @retval None
+ */
+static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
+{
+ /* Reset handle parameters */
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferISR = NULL;
+
+ /* Store Last receive data if any */
+ if (((ITFlags & I2C_FLAG_RXNE) != RESET))
+ {
+ /* Read data from RXDR */
+ (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+
+ if ((hi2c->XferSize > 0U))
+ {
+ hi2c->XferSize--;
+ hi2c->XferCount--;
+
+ /* Set ErrorCode corresponding to a Non-Acknowledge */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+ }
+ }
+
+ /* Disable all Interrupts*/
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* Clear NACK Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
+ HAL_I2C_ListenCpltCallback(hi2c);
+}
+
+/**
+ * @brief I2C interrupts error process.
+ * @param hi2c I2C handle.
+ * @param ErrorCode Error code to handle.
+ * @retval None
+ */
+static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
+{
+ /* Reset handle parameters */
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+ hi2c->XferOptions = I2C_NO_OPTION_FRAME;
+ hi2c->XferCount = 0U;
+
+ /* Set new error code */
+ hi2c->ErrorCode |= ErrorCode;
+
+ /* Disable Interrupts */
+ if ((hi2c->State == HAL_I2C_STATE_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) ||
+ (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN))
+ {
+ /* Disable all interrupts, except interrupts related to LISTEN state */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* keep HAL_I2C_STATE_LISTEN if set */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = I2C_Slave_ISR_IT;
+ }
+ else
+ {
+ /* Disable all interrupts */
+ I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
+
+ /* If state is an abort treatment on goind, don't change state */
+ /* This change will be do later */
+ if (hi2c->State != HAL_I2C_STATE_ABORT)
+ {
+ /* Set HAL_I2C_STATE_READY */
+ hi2c->State = HAL_I2C_STATE_READY;
+ }
+ hi2c->PreviousState = I2C_STATE_NONE;
+ hi2c->XferISR = NULL;
+ }
+
+ /* Abort DMA TX transfer if any */
+ if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA TX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
+ {
+ /* Call Directly XferAbortCallback function in case of error */
+ hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
+ }
+ }
+ /* Abort DMA RX transfer if any */
+ else if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
+ {
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* Set the I2C DMA Abort callback :
+ will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
+ hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Abort DMA RX */
+ if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
+ {
+ /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
+ hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
+ }
+ }
+ else if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief I2C Tx data register flush process.
+ * @param hi2c I2C handle.
+ * @retval None
+ */
+static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c)
+{
+ /* If a pending TXIS flag is set */
+ /* Write a dummy data in TXDR to clear it */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET)
+ {
+ hi2c->Instance->TXDR = 0x00U;
+ }
+
+ /* Flush TX register if not empty */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+ {
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+ }
+}
+
+/**
+ * @brief DMA I2C master transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave transmit process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C master receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable DMA Request */
+ hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
+
+ /* If last transfer, enable STOP interrupt */
+ if (hi2c->XferCount == 0U)
+ {
+ /* Enable STOP interrupt */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
+ }
+ /* else prepare a new DMA transfer and enable TCReload interrupt */
+ else
+ {
+ /* Update Buffer pointer */
+ hi2c->pBuffPtr += hi2c->XferSize;
+
+ /* Set the XferSize to transfer */
+ if (hi2c->XferCount > MAX_NBYTE_SIZE)
+ {
+ hi2c->XferSize = MAX_NBYTE_SIZE;
+ }
+ else
+ {
+ hi2c->XferSize = hi2c->XferCount;
+ }
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+
+ /* Enable TC interrupts */
+ I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
+ }
+}
+
+/**
+ * @brief DMA I2C slave receive process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdma);
+
+ /* No specific action, Master fully manage the generation of STOP condition */
+ /* Mean that this generation can arrive at any time, at the end or during DMA process */
+ /* So STOP condition should be manage through Interrupt treatment */
+}
+
+/**
+ * @brief DMA I2C communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
+}
+
+/**
+ * @brief DMA I2C communication abort callback
+ * (To be called at end of DMA Abort procedure).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
+{
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Disable Acknowledge */
+ hi2c->Instance->CR2 |= I2C_CR2_NACK;
+
+ /* Reset AbortCpltCallback */
+ hi2c->hdmatx->XferAbortCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
+
+ /* Check if come from abort from user */
+ if (hi2c->State == HAL_I2C_STATE_ABORT)
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_AbortCpltCallback(hi2c);
+ }
+ else
+ {
+ /* Call the corresponding callback to inform upper layer of End of Transfer */
+ HAL_I2C_ErrorCallback(hi2c);
+ }
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Flag Specifies the I2C flag to check.
+ * @param Status The new Flag status (SET or RESET).
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+ {
+ /* Check if a NACK is detected */
+ if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check if a STOPF is detected */
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+ {
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+
+ /* Check for the Timeout */
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Acknowledge failed detection during an I2C Communication.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param Timeout Timeout duration
+ * @param Tickstart Tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+{
+ if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+ {
+ /* Wait until STOP Flag is reset */
+ /* AutoEnd should be initiate after AF */
+ while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0U) || ((HAL_GetTick() - Tickstart) > Timeout))
+ {
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear NACKF Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+
+ /* Clear STOP Flag */
+ __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+
+ /* Flush TX register */
+ I2C_Flush_TXDR(hi2c);
+
+ /* Clear Configuration Register 2 */
+ I2C_RESET_CR2(hi2c);
+
+ hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @param hi2c I2C handle.
+ * @param DevAddress Specifies the slave address to be programmed.
+ * @param Size Specifies the number of bytes to be programmed.
+ * This parameter must be a value between 0 and 255.
+ * @param Mode New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_RELOAD_MODE Enable Reload mode .
+ * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode.
+ * @arg @ref I2C_SOFTEND_MODE Enable Software end mode.
+ * @param Request New state of the I2C START condition generation.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition.
+ * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
+ * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request.
+ * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
+ * @retval None
+ */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_TRANSFER_MODE(Mode));
+ assert_param(IS_TRANSFER_REQUEST(Request));
+
+ /* Get the CR2 register value */
+ tmpreg = hi2c->Instance->CR2;
+
+ /* clear tmpreg specific bits */
+ tmpreg &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP));
+
+ /* update tmpreg */
+ tmpreg |= (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << 16) & I2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request);
+
+ /* update CR2 register */
+ hi2c->Instance->CR2 = tmpreg;
+}
+
+/**
+ * @brief Manage the enabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
+ (hi2c->XferISR == I2C_Slave_ISR_DMA))
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+ }
+ else
+ {
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Enable ERR, STOP, NACK, and ADDR interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and RXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Enable ERR, TC, STOP, NACK and TXI interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+ }
+
+ /* Enable interrupts only at the end */
+ /* to avoid the risk of I2C interrupt handle execution before */
+ /* all interrupts requested done */
+ __HAL_I2C_ENABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Manage the disabling of Interrupts.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2C.
+ * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
+{
+ uint32_t tmpisr = 0U;
+
+ if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
+ {
+ /* Disable TC and TXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_TXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
+ {
+ /* Disable TC and RXI interrupts */
+ tmpisr |= I2C_IT_TCI | I2C_IT_RXI;
+
+ if ((hi2c->State & HAL_I2C_STATE_LISTEN) != HAL_I2C_STATE_LISTEN)
+ {
+ /* Disable NACK and STOP interrupts */
+ tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+ }
+
+ if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
+ {
+ /* Disable ADDR, NACK and STOP interrupts */
+ tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_ERROR_IT) == I2C_XFER_ERROR_IT)
+ {
+ /* Enable ERR and NACK interrupts */
+ tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_CPLT_IT) == I2C_XFER_CPLT_IT)
+ {
+ /* Enable STOP interrupts */
+ tmpisr |= I2C_IT_STOPI;
+ }
+
+ if ((InterruptRequest & I2C_XFER_RELOAD_IT) == I2C_XFER_RELOAD_IT)
+ {
+ /* Enable TC interrupts */
+ tmpisr |= I2C_IT_TCI;
+ }
+
+ /* Disable interrupts only at the end */
+ /* to avoid a breaking situation like at "t" time */
+ /* all disable interrupts request are not done */
+ __HAL_I2C_DISABLE_IT(hi2c, tmpisr);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c
new file mode 100644
index 00000000..e58a72eb
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c
@@ -0,0 +1,349 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c_ex.c
+ * @author MCD Application Team
+ * @brief I2C Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of I2C Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### I2C peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the I2C interface for STM32F3xx
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable wakeup from Stop mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter and Wake Up Feature
+ (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+ (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+ (#) Configure the enable or disable of I2C Wake Up Mode using the functions :
+ (++) HAL_I2CEx_EnableWakeUp()
+ (++) HAL_I2CEx_DisableWakeUp()
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_I2CEx_EnableFastModePlus()
+ (++) HAL_I2CEx_DisableFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup I2CEx I2CEx
+ * @brief I2C Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+ (+) Configure Wake Up Feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure I2C Analog noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param AnalogFilter New state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Reset I2Cx ANOFF bit */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Configure I2C Digital noise filter.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+ assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Get the old register value */
+ tmpreg = hi2c->Instance->CR1;
+
+ /* Reset I2Cx DNF bits [11:8] */
+ tmpreg &= ~(I2C_CR1_DNF);
+
+ /* Set I2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8U;
+
+ /* Store the new register value */
+ hi2c->Instance->CR1 = tmpreg;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable I2C wakeup from stop mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Enable wakeup from stop mode */
+ hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Disable I2C wakeup from stop mode.
+ * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
+ * the configuration information for the specified I2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+ if (hi2c->State == HAL_I2C_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_BUSY;
+
+ /* Disable the selected I2C peripheral */
+ __HAL_I2C_DISABLE(hi2c);
+
+ /* Enable wakeup from stop mode */
+ hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
+
+ __HAL_I2C_ENABLE(hi2c);
+
+ hi2c->State = HAL_I2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be enabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref I2CEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be disabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @retval None
+ */
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c
new file mode 100644
index 00000000..15599cf0
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr.c
@@ -0,0 +1,477 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr.c
+ * @author MCD Application Team
+ * @brief PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWR PWR
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted
+ write accesses.
+ To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Enable the Power Controller (PWR) APB1 interface clock using the
+ __HAL_RCC_PWR_CLK_ENABLE() macro.
+ (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the PWR peripheral registers to their default reset values.
+ * @retval None
+ */
+void HAL_PWR_DeInit(void)
+{
+ __HAL_RCC_PWR_FORCE_RESET();
+ __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+ * @brief Enables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 32 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @brief Disables access to the backup domain (RTC registers, RTC
+ * backup data registers and backup SRAM).
+ * @note If the HSE divided by 32 is used as the RTC clock, the
+ * Backup Domain Access should be kept enabled.
+ * @retval None
+ */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+
+ *** WakeUp pin configuration ***
+ ================================
+ [..]
+ (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is
+ forced in input pull down configuration and is active on rising edges.
+ (+) There are up to three WakeUp pins:
+ (++)WakeUp Pin 1 on PA.00.
+ (++)WakeUp Pin 2 on PC.13 (STM32F303xC, STM32F303xE only).
+ (++)WakeUp Pin 3 on PE.06.
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ Refer to the datasheets for more details.
+
+ *** Low Power modes configuration ***
+ =====================================
+ [..]
+ The devices feature 3 low-power modes:
+ (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
+ (+) Stop mode: all clocks are stopped, regulator running, regulator
+ in low power mode
+ (+) Standby mode: 1.2V domain powered off (mode not available on STM32F3x8 devices).
+
+ *** Sleep mode ***
+ ==================
+ [..]
+ (+) Entry:
+ The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
+ functions with
+ (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+ (+) Exit:
+ (++) Any peripheral interrupt acknowledged by the nested vectored interrupt
+ controller (NVIC) can wake up the device from Sleep mode.
+
+ *** Stop mode ***
+ =================
+ [..]
+ In Stop mode, all clocks in the 1.8V domain are stopped, the PLL, the HSI,
+ and the HSE RC oscillators are disabled. Internal SRAM and register contents
+ are preserved.
+ The voltage regulator can be configured either in normal or low-power mode to minimize the consumption.
+
+ (+) Entry:
+ The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFI )
+ function with:
+ (++) Main regulator ON or
+ (++) Low Power regulator ON.
+ (++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction or
+ (++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction
+ (+) Exit:
+ (++) Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+ (++) Some specific communication peripherals (CEC, USART, I2C) interrupts,
+ when programmed in wakeup mode (the peripheral must be
+ programmed in wakeup mode and the corresponding interrupt vector
+ must be enabled in the NVIC).
+
+ *** Standby mode ***
+ ====================
+ [..]
+ The Standby mode allows to achieve the lowest power consumption. It is based
+ on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
+ The 1.8V domain is consequently powered off. The PLL, the HSI oscillator and
+ the HSE oscillator are also switched off. SRAM and register contents are lost
+ except for the RTC registers, RTC backup registers, backup SRAM and Standby
+ circuitry.
+ The voltage regulator is OFF.
+
+ (+) Entry:
+ (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+ (+) Exit:
+ (++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup,
+ tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+ *** Auto-wakeup (AWU) from low-power mode ***
+ =============================================
+ [..]
+ The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+ Wakeup event, a tamper event, a time-stamp event, or a comparator event,
+ without depending on an external interrupt (Auto-wakeup mode).
+
+ (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+
+ (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+ configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+ (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+ is necessary to configure the RTC to detect the tamper or time stamp event using the
+ HAL_RTC_SetTimeStamp_IT() or HAL_RTC_SetTamper_IT() functions.
+
+ (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+ configure the RTC to generate the RTC WakeUp event using the HAL_RTC_SetWakeUpTimer_IT() function.
+
+ (+) Comparator auto-wakeup (AWU) from the Stop mode
+
+ (++) To wake up from the Stop mode with a comparator wakeup event, it is necessary to:
+ (+++) Configure the EXTI Line associated with the comparator (example EXTI Line 22 for comparator 2U)
+ to be sensitive to to the selected edges (falling, rising or falling
+ and rising) (Interrupt or Event modes) using the EXTI_Init() function.
+ (+++) Configure the comparator to generate the event.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the WakeUp PINx functionality.
+ * @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
+ * This parameter can be value of :
+ * @ref PWR_WakeUp_Pins
+ * @retval None
+ */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+ /* Enable the EWUPx pin */
+ SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Disables the WakeUp PINx functionality.
+ * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
+ * This parameter can be values of :
+ * @ref PWR_WakeUp_Pins
+ * @retval None
+ */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+ /* Disable the EWUPx pin */
+ CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+ * @brief Enters Sleep mode.
+ * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+ * @param Regulator Specifies the regulator state in SLEEP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+ * @note This parameter has no effect in F3 family and is just maintained to
+ * offer full portability of other STM32 families softwares.
+ * @param SLEEPEntry Specifies if SLEEP mode is entered with WFI or WFE instruction.
+ * When WFI entry is used, tick interrupt have to be disabled if not desired as
+ * the interrupt wake up source.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ /* Select SLEEP mode entry -------------------------------------------------*/
+ if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+}
+
+/**
+ * @brief Enters STOP mode.
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ * @note When exiting Stop mode by issuing an interrupt or a wakeup event,
+ * the HSI RC oscillator is selected as system clock.
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ * @param Regulator Specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_ON: STOP mode with regulator ON
+ * @arg PWR_LOWPOWERREGULATOR_ON: STOP mode with low power regulator ON
+ * @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPENTRY_WFI:Enter STOP mode with WFI instruction
+ * @arg PWR_STOPENTRY_WFE: Enter STOP mode with WFE instruction
+ * @retval None
+ */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg = PWR->CR;
+
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS);
+
+ /* Set LPDS bit according to Regulator value */
+ tmpreg |= Regulator;
+
+ /* Store the new value */
+ PWR->CR = tmpreg;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_STOPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __SEV();
+ __WFE();
+ __WFE();
+ }
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+}
+
+/**
+ * @brief Enters STANDBY mode.
+ * @note In Standby mode, all I/O pins are high impedance except for:
+ * - Reset pad (still available),
+ * - RTC alternate function pins if configured for tamper, time-stamp, RTC
+ * Alarm out, or RTC clock calibration out,
+ * - WKUP pins if enabled.
+ * @retval None
+ */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+ /* Select STANDBY mode */
+ PWR->CR |= PWR_CR_PDDS;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
+ * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * Setting this bit is useful when the processor is expected to run only on
+ * interruptions handling.
+ * @retval None
+ */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+/**
+ * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+ * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+ * re-enters SLEEP mode when an interruption handling is over.
+ * @retval None
+ */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+
+/**
+ * @brief Enables CORTEX M4 SEVONPEND bit.
+ * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+ /* Set SEVONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+
+/**
+ * @brief Disables CORTEX M4 SEVONPEND bit.
+ * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
+ * WFE to wake up when an interrupt moves from inactive to pended.
+ * @retval None
+ */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+ /* Clear SEVONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c
new file mode 100644
index 00000000..188535e1
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_pwr_ex.c
@@ -0,0 +1,288 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Extended Initialization and de-initialization functions
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWREx HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWR Extended Private Constants
+ * @{
+ */
+#define PVD_MODE_IT (0x00010000U)
+#define PVD_MODE_EVT (0x00020000U)
+#define PVD_RISING_EDGE (0x00000001U)
+#define PVD_FALLING_EDGE (0x00000002U)
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral Extended control functions #####
+ ===============================================================================
+ *** PVD configuration (present on all other devices than STM32F3x8 devices) ***
+ =========================
+ [..]
+ (+) The PVD is used to monitor the VDD power supply by comparing it to a
+ threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro
+ (+) The PVD is stopped in Standby mode.
+ -@- PVD is not available on STM32F3x8 Product Line
+
+
+ *** Voltage regulator ***
+ =========================
+ [..]
+ (+) The voltage regulator is always enabled after Reset. It works in three different
+ modes.
+ In Run mode, the regulator supplies full power to the 1.8V domain (core, memories
+ and digital peripherals).
+ In Stop mode, the regulator supplies low power to the 1.8V domain, preserving
+ contents of registers and SRAM.
+ In Stop mode, the regulator is powered off. The contents of the registers and SRAM
+ are lost except for the Standby circuitry and the Backup Domain.
+ Note: in the STM32F3x8xx devices, the voltage regulator is bypassed and the
+ microcontroller must be powered from a nominal VDD = 1.8V +/-8U% voltage.
+
+
+ (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
+ than the PVD threshold. This event is internally connected to the EXTI
+ line16 and can generate an interrupt if enabled. This is done through
+ __HAL_PWR_PVD_EXTI_ENABLE_IT() macro
+ (+) The PVD is stopped in Standby mode.
+
+
+ *** SDADC power configuration ***
+ ================================
+ [..]
+ (+) On STM32F373xC/STM32F378xx devices, there are up to
+ 3 SDADC instances that can be enabled/disabled.
+
+@endverbatim
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
+ * information for the PVD.
+ * @note Refer to the electrical characteristics of your device datasheet for
+ * more details about the voltage threshold corresponding to each
+ * detection level.
+ * @retval None
+ */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+ assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+ /* Set PLS[7:5] bits according to PVDLevel value */
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+
+ /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+ __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+ __HAL_PWR_PVD_EXTI_DISABLE_IT();
+ __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+ /* Configure interrupt mode */
+ if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_IT();
+ }
+
+ /* Configure event mode */
+ if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+ }
+
+ /* Configure the edge */
+ if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+ }
+
+ if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ {
+ __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+ }
+}
+
+/**
+ * @brief Enables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_EnablePVD(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief Disables the Power Voltage Detector(PVD).
+ * @retval None
+ */
+void HAL_PWR_DisablePVD(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief This function handles the PWR PVD interrupt request.
+ * @note This API should be called under the PVD_IRQHandler().
+ * @retval None
+ */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+ /* Check PWR exti flag */
+ if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+ {
+ /* PWR PVD interrupt user callback */
+ HAL_PWR_PVDCallback();
+
+ /* Clear PWR Exti pending bit */
+ __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+ }
+}
+
+/**
+ * @brief PWR PVD interrupt callback
+ * @retval None
+ */
+__weak void HAL_PWR_PVDCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_PWR_PVDCallback could be implemented in the user file
+ */
+}
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/**
+ * @brief Enables the SDADC peripheral functionaliy
+ * @param Analogx specifies the SDADC peripheral instance.
+ * This parameter can be: PWR_SDADC_ANALOG1, PWR_SDADC_ANALOG2 or PWR_SDADC_ANALOG3.
+ * @retval None
+ */
+void HAL_PWREx_EnableSDADC(uint32_t Analogx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_SDADC_ANALOG(Analogx));
+
+ /* Enable PWR clock interface for SDADC use */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ PWR->CR |= Analogx;
+}
+
+/**
+ * @brief Disables the SDADC peripheral functionaliy
+ * @param Analogx specifies the SDADC peripheral instance.
+ * This parameter can be: PWR_SDADC_ANALOG1, PWR_SDADC_ANALOG2 or PWR_SDADC_ANALOG3.
+ * @retval None
+ */
+void HAL_PWREx_DisableSDADC(uint32_t Analogx)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_SDADC_ANALOG(Analogx));
+
+ PWR->CR &= ~Analogx;
+}
+
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c
new file mode 100644
index 00000000..0fa36cc9
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc.c
@@ -0,0 +1,1171 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc.c
+ * @author MCD Application Team
+ * @brief RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Reset and Clock Control (RCC) peripheral:
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### RCC specific features #####
+ ==============================================================================
+ [..]
+ After reset the device is running from Internal High Speed oscillator
+ (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled,
+ and all peripherals are off except internal SRAM, Flash and JTAG.
+ (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses;
+ all peripherals mapped on these buses are running at HSI speed.
+ (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+ (+) All GPIOs are in input floating state, except the JTAG pins which
+ are assigned to be used for debug purpose.
+ [..] Once the device started from reset, the user application has to:
+ (+) Configure the clock source to be used to drive the System clock
+ (if the application needs higher frequency/performance)
+ (+) Configure the System clock frequency and Flash settings
+ (+) Configure the AHB and APB buses prescalers
+ (+) Enable the clock for the peripheral(s) to be used
+ (+) Configure the clock source(s) for peripherals whose clocks are not
+ derived from the System clock (RTC, ADC, I2C, I2S, TIM, USB FS)
+
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RCC RCC
+* @brief RCC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+/* Bits position in in the CFGR register */
+#define RCC_CFGR_HPRE_BITNUMBER POSITION_VAL(RCC_CFGR_HPRE)
+#define RCC_CFGR_PPRE1_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE1)
+#define RCC_CFGR_PPRE2_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE2)
+/**
+ * @}
+ */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+ * @{
+ */
+const uint8_t aPLLMULFactorTable[16] = { 2U, 3U, 4U, 5U, 6U, 7U, 8U, 9U,
+ 10U, 11U, 12U, 13U, 14U, 15U, 16U, 16U};
+const uint8_t aPredivFactorTable[16] = { 1U, 2U, 3U, 4U, 5U, 6U, 7U, 8U,
+ 9U,10U, 11U, 12U, 13U, 14U, 15U, 16U};
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..]
+ This section provides functions allowing to configure the internal/external oscillators
+ (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1
+ and APB2).
+
+ [..] Internal/external clock and PLL configuration
+ (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+ The HSI clock can be used also to clock the USART and I2C peripherals.
+
+ (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ (#) PLL (clocked by HSI or HSE), featuring different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 72 MHz)
+ (++) The second output is used to generate the clock for the USB FS (48 MHz)
+ (++) The third output may be used to generate the clock for the ADC peripherals (up to 72 MHz)
+ (++) The fourth output may be used to generate the clock for the TIM peripherals (144 MHz)
+
+ (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clocks automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
+ (Non-Maskable Interrupt) exception vector.
+
+ (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL
+ clock (divided by 2) output on pin (such as PA8 pin).
+
+ [..] System, AHB and APB buses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these buses. You can use
+ "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+
+ (#) All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ (++) The FLASH program/erase clock which is always HSI 8MHz clock.
+ (++) The USB 48 MHz clock which is derived from the PLL VCO clock.
+ (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE.
+ (++) The I2C clock which can be derived as well from HSI 8MHz clock.
+ (++) The ADC clock which is derived from PLL output.
+ (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC
+ (HSE divided by a programmable prescaler). The System clock (SYSCLK)
+ frequency must be higher or equal to the RTC clock frequency.
+ (++) IWDG clock which is always the LSI clock.
+
+ (#) For the STM32F3xx devices, the maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 72 MHz,
+ Depending on the SYSCLK frequency, the flash latency should be adapted accordingly.
+
+ (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and
+ prefetch is disabled.
+ @endverbatim
+ * @{
+ */
+
+/*
+ Additional consideration on the SYSCLK based on Latency settings:
+ +-----------------------------------------------+
+ | Latency | SYSCLK clock frequency (MHz) |
+ |---------------|-------------------------------|
+ |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
+ |---------------|-------------------------------|
+ |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
+ |---------------|-------------------------------|
+ |2WS(3CPU cycle)| 48 < SYSCLK <= 72 |
+ +-----------------------------------------------+
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE and PLL OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS and MCO1 OFF
+ * - All interrupts disabled
+ * @note This function does not modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval None
+ */
+void HAL_RCC_DeInit(void)
+{
+ /* Set HSION bit, HSITRIM[4:0] bits to the reset value*/
+ SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
+
+ /* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0] and MCOSEL[2:0] bits */
+ CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE1 | RCC_CFGR_PPRE2 | RCC_CFGR_MCO);
+
+ /* Reset HSEON, CSSON, PLLON bits */
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON);
+
+ /* Reset HSEBYP bit */
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+
+ /* Reset CFGR register */
+ CLEAR_REG(RCC->CFGR);
+
+ /* Reset CFGR2 register */
+ CLEAR_REG(RCC->CFGR2);
+
+ /* Reset CFGR3 register */
+ CLEAR_REG(RCC->CFGR3);
+
+ /* Disable all interrupts */
+ CLEAR_REG(RCC->CIR);
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HSI_VALUE;
+}
+
+/**
+ * @brief Initializes the RCC Oscillators according to the specified parameters in the
+ * RCC_OscInitTypeDef.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC Oscillators.
+ * @note The PLL is not disabled when used as system clock.
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this macro. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(RCC_OscInitStruct != NULL);
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+
+ /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ /* Configure the HSE predivision factor --------------------------------*/
+ __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue);
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+ /* Check the HSE State */
+ if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ FlagStatus pwrclkchanged = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Update LSE configuration in Backup Domain control register */
+ /* Requires to enable write access to Backup Domain of necessary */
+ if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ {
+ __HAL_RCC_PWR_CLK_ENABLE();
+ pwrclkchanged = SET;
+ }
+
+ if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF)
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Require to disable power clock if necessary */
+ if(pwrclkchanged == SET)
+ {
+ __HAL_RCC_PWR_CLK_DISABLE();
+ }
+ }
+
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV));
+#endif
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ /* Configure the main PLL clock source, predivider and multiplication factor. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PREDIV,
+ RCC_OscInitStruct->PLL.PLLMUL);
+#else
+ /* Configure the main PLL clock source and multiplication factor. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PLLMUL);
+#endif /* RCC_CFGR_PLLSRC_HSI_PREDIV */
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CPU, AHB and APB buses clocks according to the specified
+ * parameters in the RCC_ClkInitStruct.
+ * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * contains the configuration information for the RCC peripheral.
+ * @param FLatency FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function
+ *
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * start-up from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ *
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after start-up delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is
+ * currently used as system clock source.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check the parameters */
+ assert_param(RCC_ClkInitStruct != NULL);
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) of the device. */
+
+ /* Increasing the number of wait states because of higher CPU frequency */
+ if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /* Decreasing the number of wait states because of lower CPU frequency */
+ if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /*-------------------------- PCLK2 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U));
+ }
+
+ /* Update the SystemCoreClock global variable */
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+
+ @endverbatim
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @note MCO pin should be configured in alternate function mode.
+ * @param RCC_MCOx specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
+ * @param RCC_MCOSource specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param RCC_MCODiv specifies the MCO DIV.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 no division applied to MCO clock
+ * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock
+ * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock
+ * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock
+ * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock
+ * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock
+ * @arg @ref RCC_MCODIV_64 division by 64 applied to MCO clock
+ * @arg @ref RCC_MCODIV_128 division by 128 applied to MCO clock
+ * @retval None
+ */
+#else
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @note MCO pin should be configured in alternate function mode.
+ * @param RCC_MCOx specifies the output direction for the clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
+ * @param RCC_MCOSource specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param RCC_MCODiv specifies the MCO DIV.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 no division applied to MCO clock
+ * @retval None
+ */
+#endif
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+ GPIO_InitTypeDef gpio;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCOx));
+ assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
+ /* Configure the MCO1 pin in alternate function mode */
+ gpio.Mode = GPIO_MODE_AF_PP;
+ gpio.Speed = GPIO_SPEED_FREQ_HIGH;
+ gpio.Pull = GPIO_NOPULL;
+ gpio.Pin = MCO1_PIN;
+ gpio.Alternate = GPIO_AF0_MCO;
+
+ /* MCO1 Clock Enable */
+ MCO1_CLK_ENABLE();
+
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio);
+
+ /* Configure the MCO clock source */
+ __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv);
+}
+
+/**
+ * @brief Enables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+ * @retval None
+ */
+void HAL_RCC_EnableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Clock Security System.
+ * @retval None
+ */
+void HAL_RCC_DisableCSS(void)
+{
+ *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Returns the SYSCLK frequency
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**)
+ * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE
+ * divided by PREDIV factor(**) or HSI_VALUE(*) multiplied by the PLL factor.
+ * @note (*) HSI_VALUE is a constant defined in stm32f3xx_hal_conf.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f3xx_hal_conf.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @note This function can be used by the user application to compute the
+ * baud-rate for the communication peripherals or configure other parameters.
+ *
+ * @note Each time SYSCLK changes, this function must be called to update the
+ * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @retval SYSCLK frequency
+ */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+ uint32_t tmpreg = 0U, prediv = 0U, pllclk = 0U, pllmul = 0U;
+ uint32_t sysclockfreq = 0U;
+
+ tmpreg = RCC->CFGR;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (tmpreg & RCC_CFGR_SWS)
+ {
+ case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */
+ {
+ pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> POSITION_VAL(RCC_CFGR_PLLMUL)];
+ prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> POSITION_VAL(RCC_CFGR2_PREDIV)];
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE / prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
+ pllclk = (HSI_VALUE >> 1U) * pllmul;
+ }
+#else
+ if ((tmpreg & RCC_CFGR_PLLSRC_HSE_PREDIV) == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE / prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+ pllclk = (HSI_VALUE / prediv) * pllmul;
+ }
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+ sysclockfreq = pllclk;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ default: /* HSI used as system clock */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
+}
+
+/**
+ * @brief Returns the HCLK frequency
+ * @note Each time HCLK changes, this function must be called to update the
+ * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+ *
+ * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
+ * and updated within this function
+ * @retval HCLK frequency
+ */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+ return SystemCoreClock;
+}
+
+/**
+ * @brief Returns the PCLK1 frequency
+ * @note Each time PCLK1 changes, this function must be called to update the
+ * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK1 frequency
+ */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{
+ /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_BITNUMBER]);
+}
+
+/**
+ * @brief Returns the PCLK2 frequency
+ * @note Each time PCLK2 changes, this function must be called to update the
+ * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+ * @retval PCLK2 frequency
+ */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+ /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+ return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_BITNUMBER]);
+}
+
+/**
+ * @brief Configures the RCC_OscInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
+ * will be configured.
+ * @retval None
+ */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+{
+ /* Check the parameters */
+ assert_param(RCC_OscInitStruct != NULL);
+
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \
+ | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+
+ /* Get the HSE configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+ }
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+ }
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ RCC_OscInitStruct->HSEPredivValue = __HAL_RCC_HSE_GET_PREDIV();
+#endif
+
+ /* Get the HSI configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+ }
+
+ RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+ /* Get the LSE configuration -----------------------------------------------*/
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+ }
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+ }
+
+ /* Get the LSI configuration -----------------------------------------------*/
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+ }
+
+
+ /* Get the PLL configuration -----------------------------------------------*/
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+ }
+ else
+ {
+ RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+ }
+ RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC);
+ RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL);
+#if defined(RCC_CFGR_PLLSRC_HSI_PREDIV)
+ RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV);
+#endif /* RCC_CFGR_PLLSRC_HSI_PREDIV */
+}
+
+/**
+ * @brief Get the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
+ * contains the current clock configuration.
+ * @param pFLatency Pointer on the Flash Latency.
+ * @retval None
+ */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+ /* Check the parameters */
+ assert_param(RCC_ClkInitStruct != NULL);
+ assert_param(pFLatency != NULL);
+
+ /* Set all possible values for the Clock type parameter --------------------*/
+ RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
+ RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
+
+ /* Get the APB2 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3U);
+
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+}
+
+/**
+ * @brief This function handles the RCC CSS interrupt request.
+ * @note This API should be called under the NMI_Handler().
+ * @retval None
+ */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+ /* Check RCC CSSF flag */
+ if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+ {
+ /* RCC Clock Security System interrupt user callback */
+ HAL_RCC_CSSCallback();
+
+ /* Clear RCC CSS pending bit */
+ __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+ }
+}
+
+/**
+ * @brief RCC Clock Security System interrupt callback
+ * @retval none
+ */
+__weak void HAL_RCC_CSSCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc_ex.c
new file mode 100644
index 00000000..b1f47057
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_rcc_ex.c
@@ -0,0 +1,1596 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.c
+ * @author MCD Application Team
+ * @brief Extended RCC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities RCC extension peripheral:
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/** @defgroup RCCEx RCCEx
+ * @brief RCC Extension HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34) || defined(RCC_CFGR_USBPRE) \
+ || defined(RCC_CFGR3_TIM1SW) || defined(RCC_CFGR3_TIM2SW) || defined(RCC_CFGR3_TIM8SW) || defined(RCC_CFGR3_TIM15SW) \
+ || defined(RCC_CFGR3_TIM16SW) || defined(RCC_CFGR3_TIM17SW) || defined(RCC_CFGR3_TIM20SW) || defined(RCC_CFGR3_TIM34SW) \
+ || defined(RCC_CFGR3_HRTIM1SW)
+/** @defgroup RCCEx_Private_Functions RCCEx Private Functions
+ * @{
+ */
+static uint32_t RCC_GetPLLCLKFreq(void);
+
+/**
+ * @}
+ */
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRExx || RCC_CFGR3_TIMxSW || RCC_CFGR3_HRTIM1SW || RCC_CFGR_USBPRE */
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+ * @{
+ */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the RCC Clocks
+ frequencies.
+ [..]
+ (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+ select the RTC clock source; in this case the Backup domain will be reset in
+ order to modify the RTC Clock source, as consequence RTC registers (including
+ the backup registers) are set to their reset values.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RCC extended peripherals clocks according to the specified
+ * parameters in the RCC_PeriphCLKInitTypeDef.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * contains the configuration information for the Extended Peripherals clocks
+ * (ADC, CEC, I2C, I2S, SDADC, HRTIM, TIM, USART, RTC and USB).
+ *
+ * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+ * the RTC clock source; in this case the Backup domain will be reset in
+ * order to modify the RTC Clock source, as consequence RTC registers (including
+ * the backup registers) and RCC_BDCR register are set to their reset values.
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ uint32_t tickstart = 0U;
+ uint32_t temp_reg = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+ /*---------------------------- RTC configuration -------------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+ {
+ /* check for RTC Parameters used to output RTCCLK */
+ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
+
+ FlagStatus pwrclkchanged = RESET;
+
+ /* As soon as function is called to change RTC clock source, activation of the
+ power domain is done. */
+ /* Requires to enable write access to Backup Domain of necessary */
+ if(__HAL_RCC_PWR_IS_CLK_DISABLED())
+ {
+ __HAL_RCC_PWR_CLK_ENABLE();
+ pwrclkchanged = SET;
+ }
+
+ if(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
+ {
+ if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
+ temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL);
+ if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
+ {
+ /* Store the content of BDCR register before the reset of Backup Domain */
+ temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+ /* RTC Clock selection can be changed only if the Backup Domain is reset */
+ __HAL_RCC_BACKUPRESET_FORCE();
+ __HAL_RCC_BACKUPRESET_RELEASE();
+ /* Restore the Content of BDCR register */
+ RCC->BDCR = temp_reg;
+
+ /* Wait for LSERDY if LSE was enabled */
+ if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON))
+ {
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+
+ /* Require to disable power clock if necessary */
+ if(pwrclkchanged == SET)
+ {
+ __HAL_RCC_PWR_CLK_DISABLE();
+ }
+ }
+
+ /*------------------------------- USART1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+
+ /* Configure the USART1 clock source */
+ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+ }
+
+#if defined(RCC_CFGR3_USART2SW)
+ /*----------------------------- USART2 Configuration --------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+
+ /* Configure the USART2 clock source */
+ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+ }
+#endif /* RCC_CFGR3_USART2SW */
+
+#if defined(RCC_CFGR3_USART3SW)
+ /*------------------------------ USART3 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+
+ /* Configure the USART3 clock source */
+ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+ }
+#endif /* RCC_CFGR3_USART3SW */
+
+ /*------------------------------ I2C1 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+
+ /* Configure the I2C1 clock source */
+ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+ }
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+ /*------------------------------ USB Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->USBClockSelection));
+
+ /* Configure the USB clock source */
+ __HAL_RCC_USB_CONFIG(PeriphClkInit->USBClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+
+ /*------------------------------ I2C2 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+
+ /* Configure the I2C2 clock source */
+ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ I2C3 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+
+ /* Configure the I2C3 clock source */
+ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+ }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+ /*------------------------------ UART4 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+
+ /* Configure the UART4 clock source */
+ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+ }
+
+ /*------------------------------ UART5 Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+
+ /* Configure the UART5 clock source */
+ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+ /*------------------------------ I2S Configuration ------------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+
+ /* Configure the I2S clock source */
+ __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ ADC1 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC1) == RCC_PERIPHCLK_ADC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC1PLLCLK_DIV(PeriphClkInit->Adc1ClockSelection));
+
+ /* Configure the ADC1 clock source */
+ __HAL_RCC_ADC1_CONFIG(PeriphClkInit->Adc1ClockSelection);
+ }
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+ /*------------------------------ ADC1 & ADC2 clock Configuration -------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC12) == RCC_PERIPHCLK_ADC12)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC12PLLCLK_DIV(PeriphClkInit->Adc12ClockSelection));
+
+ /* Configure the ADC12 clock source */
+ __HAL_RCC_ADC12_CONFIG(PeriphClkInit->Adc12ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ /*------------------------------ ADC3 & ADC4 clock Configuration -------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC34) == RCC_PERIPHCLK_ADC34)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC34PLLCLK_DIV(PeriphClkInit->Adc34ClockSelection));
+
+ /* Configure the ADC34 clock source */
+ __HAL_RCC_ADC34_CONFIG(PeriphClkInit->Adc34ClockSelection);
+ }
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+ /*------------------------------ ADC1 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC1) == RCC_PERIPHCLK_ADC1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_ADC1PCLK2_DIV(PeriphClkInit->Adc1ClockSelection));
+
+ /* Configure the ADC1 clock source */
+ __HAL_RCC_ADC1_CONFIG(PeriphClkInit->Adc1ClockSelection);
+ }
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ TIM1 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM1CLKSOURCE(PeriphClkInit->Tim1ClockSelection));
+
+ /* Configure the TIM1 clock source */
+ __HAL_RCC_TIM1_CONFIG(PeriphClkInit->Tim1ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ /*------------------------------ TIM8 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM8) == RCC_PERIPHCLK_TIM8)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM8CLKSOURCE(PeriphClkInit->Tim8ClockSelection));
+
+ /* Configure the TIM8 clock source */
+ __HAL_RCC_TIM8_CONFIG(PeriphClkInit->Tim8ClockSelection);
+ }
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ /*------------------------------ TIM15 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection));
+
+ /* Configure the TIM15 clock source */
+ __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection);
+ }
+
+ /*------------------------------ TIM16 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM16) == RCC_PERIPHCLK_TIM16)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM16CLKSOURCE(PeriphClkInit->Tim16ClockSelection));
+
+ /* Configure the TIM16 clock source */
+ __HAL_RCC_TIM16_CONFIG(PeriphClkInit->Tim16ClockSelection);
+ }
+
+ /*------------------------------ TIM17 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM17) == RCC_PERIPHCLK_TIM17)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM17CLKSOURCE(PeriphClkInit->Tim17ClockSelection));
+
+ /* Configure the TIM17 clock source */
+ __HAL_RCC_TIM17_CONFIG(PeriphClkInit->Tim17ClockSelection);
+ }
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F334x8)
+
+ /*------------------------------ HRTIM1 clock Configuration ----------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HRTIM1) == RCC_PERIPHCLK_HRTIM1)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HRTIM1CLKSOURCE(PeriphClkInit->Hrtim1ClockSelection));
+
+ /* Configure the HRTIM1 clock source */
+ __HAL_RCC_HRTIM1_CONFIG(PeriphClkInit->Hrtim1ClockSelection);
+ }
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+ /*------------------------------ SDADC clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDADC) == RCC_PERIPHCLK_SDADC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_SDADCSYSCLK_DIV(PeriphClkInit->SdadcClockSelection));
+
+ /* Configure the SDADC clock prescaler */
+ __HAL_RCC_SDADC_CONFIG(PeriphClkInit->SdadcClockSelection);
+ }
+
+ /*------------------------------ CEC clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+ }
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+ /*------------------------------ TIM2 clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM2) == RCC_PERIPHCLK_TIM2)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM2CLKSOURCE(PeriphClkInit->Tim2ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM2_CONFIG(PeriphClkInit->Tim2ClockSelection);
+ }
+
+ /*------------------------------ TIM3 clock Configuration -------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM34) == RCC_PERIPHCLK_TIM34)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM3CLKSOURCE(PeriphClkInit->Tim34ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM34_CONFIG(PeriphClkInit->Tim34ClockSelection);
+ }
+
+ /*------------------------------ TIM15 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM15CLKSOURCE(PeriphClkInit->Tim15ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM15_CONFIG(PeriphClkInit->Tim15ClockSelection);
+ }
+
+ /*------------------------------ TIM16 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM16) == RCC_PERIPHCLK_TIM16)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM16CLKSOURCE(PeriphClkInit->Tim16ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM16_CONFIG(PeriphClkInit->Tim16ClockSelection);
+ }
+
+ /*------------------------------ TIM17 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM17) == RCC_PERIPHCLK_TIM17)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM17CLKSOURCE(PeriphClkInit->Tim17ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM17_CONFIG(PeriphClkInit->Tim17ClockSelection);
+ }
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+ /*------------------------------ TIM20 clock Configuration ------------------*/
+ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM20) == RCC_PERIPHCLK_TIM20)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_TIM20CLKSOURCE(PeriphClkInit->Tim20ClockSelection));
+
+ /* Configure the CEC clock source */
+ __HAL_RCC_TIM20_CONFIG(PeriphClkInit->Tim20ClockSelection);
+ }
+#endif /* STM32F303xE || STM32F398xx */
+
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Get the RCC_ClkInitStruct according to the internal
+ * RCC configuration registers.
+ * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
+ * returns the configuration information for the Extended Peripherals clocks
+ * (ADC, CEC, I2C, I2S, SDADC, HRTIM, TIM, USART, RTC and USB clocks).
+ * @retval None
+ */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
+{
+ /* Set all possible values for the extended clock type parameter------------*/
+ /* Common part first */
+#if defined(RCC_CFGR3_USART2SW) && defined(RCC_CFGR3_USART3SW)
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC;
+#else
+ PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_RTC;
+#endif /* RCC_CFGR3_USART2SW && RCC_CFGR3_USART3SW */
+
+ /* Get the RTC configuration --------------------------------------------*/
+ PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE();
+ /* Get the USART1 clock configuration --------------------------------------------*/
+ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+#if defined(RCC_CFGR3_USART2SW)
+ /* Get the USART2 clock configuration -----------------------------------------*/
+ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+ /* Get the USART3 clock configuration -----------------------------------------*/
+ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+#endif /* RCC_CFGR3_USART3SW */
+ /* Get the I2C1 clock configuration -----------------------------------------*/
+ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+
+#if defined(STM32F302xE) || defined(STM32F303xE)\
+ || defined(STM32F302xC) || defined(STM32F303xC)\
+ || defined(STM32F302x8) \
+ || defined(STM32F373xC)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB;
+ /* Get the USB clock configuration -----------------------------------------*/
+ PeriphClkInit->USBClockSelection = __HAL_RCC_GET_USB_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C2;
+ /* Get the I2C2 clock configuration -----------------------------------------*/
+ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C3;
+ /* Get the I2C3 clock configuration -----------------------------------------*/
+ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx)
+
+ PeriphClkInit->PeriphClockSelection |= (RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5);
+ /* Get the UART4 clock configuration -----------------------------------------*/
+ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+ /* Get the UART5 clock configuration -----------------------------------------*/
+ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S;
+ /* Get the I2S clock configuration -----------------------------------------*/
+ PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2S_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)\
+ || defined(STM32F373xC) || defined(STM32F378xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC1;
+ /* Get the ADC1 clock configuration -----------------------------------------*/
+ PeriphClkInit->Adc1ClockSelection = __HAL_RCC_GET_ADC1_SOURCE();
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC12;
+ /* Get the ADC1 & ADC2 clock configuration -----------------------------------------*/
+ PeriphClkInit->Adc12ClockSelection = __HAL_RCC_GET_ADC12_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC34;
+ /* Get the ADC3 & ADC4 clock configuration -----------------------------------------*/
+ PeriphClkInit->Adc34ClockSelection = __HAL_RCC_GET_ADC34_SOURCE();
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)\
+ || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)\
+ || defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM1;
+ /* Get the TIM1 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim1ClockSelection = __HAL_RCC_GET_TIM1_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)\
+ || defined(STM32F303xC) || defined(STM32F358xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM8;
+ /* Get the TIM8 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim8ClockSelection = __HAL_RCC_GET_TIM8_SOURCE();
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+ PeriphClkInit->PeriphClockSelection |= (RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | RCC_PERIPHCLK_TIM17);
+ /* Get the TIM15 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE();
+ /* Get the TIM16 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim16ClockSelection = __HAL_RCC_GET_TIM16_SOURCE();
+ /* Get the TIM17 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim17ClockSelection = __HAL_RCC_GET_TIM17_SOURCE();
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F334x8)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_HRTIM1;
+ /* Get the HRTIM1 clock configuration -----------------------------------------*/
+ PeriphClkInit->Hrtim1ClockSelection = __HAL_RCC_GET_HRTIM1_SOURCE();
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SDADC;
+ /* Get the SDADC clock configuration -----------------------------------------*/
+ PeriphClkInit->SdadcClockSelection = __HAL_RCC_GET_SDADC_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_CEC;
+ /* Get the CEC clock configuration -----------------------------------------*/
+ PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM2;
+ /* Get the TIM2 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim2ClockSelection = __HAL_RCC_GET_TIM2_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM34;
+ /* Get the TIM3 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim34ClockSelection = __HAL_RCC_GET_TIM34_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM15;
+ /* Get the TIM15 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim15ClockSelection = __HAL_RCC_GET_TIM15_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM16;
+ /* Get the TIM16 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim16ClockSelection = __HAL_RCC_GET_TIM16_SOURCE();
+
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM17;
+ /* Get the TIM17 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim17ClockSelection = __HAL_RCC_GET_TIM17_SOURCE();
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined (STM32F303xE) || defined(STM32F398xx)
+ PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_TIM20;
+ /* Get the TIM20 clock configuration -----------------------------------------*/
+ PeriphClkInit->Tim20ClockSelection = __HAL_RCC_GET_TIM20_SOURCE();
+#endif /* STM32F303xE || STM32F398xx */
+}
+
+/**
+ * @brief Returns the peripheral clock frequency
+ * @note Returns 0 if peripheral clock is unknown or 0xDEADDEAD if not applicable.
+ * @param PeriphClk Peripheral clock identifier
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock
+ @if STM32F301x8
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ @endif
+ @if STM32F302x8
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ @endif
+ @if STM32F302xC
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ @endif
+ @if STM32F302xE
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM2 TIM2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM34 TIM34 peripheral clock
+ @endif
+ @if STM32F303x8
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ @endif
+ @if STM32F303xC
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ @endif
+ @if STM32F303xE
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM2 TIM2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM20 TIM20 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM34 TIM34 peripheral clock
+ @endif
+ @if STM32F318xx
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ @endif
+ @if STM32F328xx
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ @endif
+ @if STM32F334x8
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_HRTIM1 HRTIM1 peripheral clock
+ @endif
+ @if STM32F358xx
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ @endif
+ @if STM32F373xC
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_SDADC SDADC peripheral clock
+ * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock
+ @endif
+ @if STM32F378xx
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC1 ADC1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_SDADC SDADC peripheral clock
+ * @arg @ref RCC_PERIPHCLK_CEC CEC peripheral clock
+ @endif
+ @if STM32F398xx
+ * @arg @ref RCC_PERIPHCLK_USART2 USART2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_USART3 USART3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_I2S I2S peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC12 ADC12 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_ADC34 ADC34 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM1 TIM1 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM2 TIM2 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM8 TIM8 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM15 TIM15 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM16 TIM16 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM17 TIM17 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM20 TIM20 peripheral clock
+ * @arg @ref RCC_PERIPHCLK_TIM34 TIM34 peripheral clock
+ @endif
+ * @retval Frequency in Hz (0: means that no available frequency for the peripheral)
+ */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+ /* frequency == 0 : means that no available frequency for the peripheral */
+ uint32_t frequency = 0U;
+
+ uint32_t srcclk = 0U;
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34)
+ uint16_t adc_pll_prediv_table[16] = { 1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U, 256U, 256U, 256U, 256U};
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRE12 || RCC_CFGR2_ADCPRE34 */
+#if defined(RCC_CFGR_SDPRE)
+ uint8_t sdadc_prescaler_table[16] = { 2U, 4U, 6U, 8U, 10U, 12U, 14U, 16U, 20U, 24U, 28U, 32U, 36U, 40U, 44U, 48U};
+#endif /* RCC_CFGR_SDPRE */
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PERIPHCLOCK(PeriphClk));
+
+ switch (PeriphClk)
+ {
+ case RCC_PERIPHCLK_RTC:
+ {
+ /* Get the current RTC source */
+ srcclk = __HAL_RCC_GET_RTC_SOURCE();
+
+ /* Check if LSE is ready and if RTC clock selection is LSE */
+ if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ /* Check if LSI is ready and if RTC clock selection is LSI */
+ else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)))
+ {
+ frequency = LSI_VALUE;
+ }
+ /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/
+ else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIV32) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)))
+ {
+ frequency = HSE_VALUE / 32U;
+ }
+ break;
+ }
+ case RCC_PERIPHCLK_USART1:
+ {
+ /* Get the current USART1 source */
+ srcclk = __HAL_RCC_GET_USART1_SOURCE();
+
+ /* Check if USART1 clock selection is PCLK1 */
+#if defined(RCC_USART1CLKSOURCE_PCLK2)
+ if (srcclk == RCC_USART1CLKSOURCE_PCLK2)
+ {
+ frequency = HAL_RCC_GetPCLK2Freq();
+ }
+#else
+ if (srcclk == RCC_USART1CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+#endif /* RCC_USART1CLKSOURCE_PCLK2 */
+ /* Check if HSI is ready and if USART1 clock selection is HSI */
+ else if ((srcclk == RCC_USART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if USART1 clock selection is SYSCLK */
+ else if (srcclk == RCC_USART1CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if USART1 clock selection is LSE */
+ else if ((srcclk == RCC_USART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#if defined(RCC_CFGR3_USART2SW)
+ case RCC_PERIPHCLK_USART2:
+ {
+ /* Get the current USART2 source */
+ srcclk = __HAL_RCC_GET_USART2_SOURCE();
+
+ /* Check if USART2 clock selection is PCLK1 */
+ if (srcclk == RCC_USART2CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if USART2 clock selection is HSI */
+ else if ((srcclk == RCC_USART2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if USART2 clock selection is SYSCLK */
+ else if (srcclk == RCC_USART2CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if USART2 clock selection is LSE */
+ else if ((srcclk == RCC_USART2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+ case RCC_PERIPHCLK_USART3:
+ {
+ /* Get the current USART3 source */
+ srcclk = __HAL_RCC_GET_USART3_SOURCE();
+
+ /* Check if USART3 clock selection is PCLK1 */
+ if (srcclk == RCC_USART3CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if USART3 clock selection is HSI */
+ else if ((srcclk == RCC_USART3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if USART3 clock selection is SYSCLK */
+ else if (srcclk == RCC_USART3CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if USART3 clock selection is LSE */
+ else if ((srcclk == RCC_USART3CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_USART3SW */
+#if defined(RCC_CFGR3_UART4SW)
+ case RCC_PERIPHCLK_UART4:
+ {
+ /* Get the current UART4 source */
+ srcclk = __HAL_RCC_GET_UART4_SOURCE();
+
+ /* Check if UART4 clock selection is PCLK1 */
+ if (srcclk == RCC_UART4CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if UART4 clock selection is HSI */
+ else if ((srcclk == RCC_UART4CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if UART4 clock selection is SYSCLK */
+ else if (srcclk == RCC_UART4CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if UART4 clock selection is LSE */
+ else if ((srcclk == RCC_UART4CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_UART4SW */
+#if defined(RCC_CFGR3_UART5SW)
+ case RCC_PERIPHCLK_UART5:
+ {
+ /* Get the current UART5 source */
+ srcclk = __HAL_RCC_GET_UART5_SOURCE();
+
+ /* Check if UART5 clock selection is PCLK1 */
+ if (srcclk == RCC_UART5CLKSOURCE_PCLK1)
+ {
+ frequency = HAL_RCC_GetPCLK1Freq();
+ }
+ /* Check if HSI is ready and if UART5 clock selection is HSI */
+ else if ((srcclk == RCC_UART5CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if UART5 clock selection is SYSCLK */
+ else if (srcclk == RCC_UART5CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ /* Check if LSE is ready and if UART5 clock selection is LSE */
+ else if ((srcclk == RCC_UART5CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_UART5SW */
+ case RCC_PERIPHCLK_I2C1:
+ {
+ /* Get the current I2C1 source */
+ srcclk = __HAL_RCC_GET_I2C1_SOURCE();
+
+ /* Check if HSI is ready and if I2C1 clock selection is HSI */
+ if ((srcclk == RCC_I2C1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if I2C1 clock selection is SYSCLK */
+ else if (srcclk == RCC_I2C1CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#if defined(RCC_CFGR3_I2C2SW)
+ case RCC_PERIPHCLK_I2C2:
+ {
+ /* Get the current I2C2 source */
+ srcclk = __HAL_RCC_GET_I2C2_SOURCE();
+
+ /* Check if HSI is ready and if I2C2 clock selection is HSI */
+ if ((srcclk == RCC_I2C2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if I2C2 clock selection is SYSCLK */
+ else if (srcclk == RCC_I2C2CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_I2C2SW */
+#if defined(RCC_CFGR3_I2C3SW)
+ case RCC_PERIPHCLK_I2C3:
+ {
+ /* Get the current I2C3 source */
+ srcclk = __HAL_RCC_GET_I2C3_SOURCE();
+
+ /* Check if HSI is ready and if I2C3 clock selection is HSI */
+ if ((srcclk == RCC_I2C3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if I2C3 clock selection is SYSCLK */
+ else if (srcclk == RCC_I2C3CLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_I2C3SW */
+#if defined(RCC_CFGR_I2SSRC)
+ case RCC_PERIPHCLK_I2S:
+ {
+ /* Get the current I2S source */
+ srcclk = __HAL_RCC_GET_I2S_SOURCE();
+
+ /* Check if I2S clock selection is External clock mapped on the I2S_CKIN pin */
+ if (srcclk == RCC_I2SCLKSOURCE_EXT)
+ {
+ /* External clock used. Frequency cannot be returned.*/
+ frequency = 0xDEADDEADU;
+ }
+ /* Check if I2S clock selection is SYSCLK */
+ else if (srcclk == RCC_I2SCLKSOURCE_SYSCLK)
+ {
+ frequency = HAL_RCC_GetSysClockFreq();
+ }
+ break;
+ }
+#endif /* RCC_CFGR_I2SSRC */
+#if defined(RCC_CFGR_USBPRE)
+ case RCC_PERIPHCLK_USB:
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Get the current USB source */
+ srcclk = __HAL_RCC_GET_USB_SOURCE();
+
+ /* Check if USB clock selection is not divided */
+ if (srcclk == RCC_USBCLKSOURCE_PLL)
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if USB clock selection is divided by 1.5 */
+ else /* RCC_USBCLKSOURCE_PLL_DIV1_5 */
+ {
+ frequency = (RCC_GetPLLCLKFreq() * 3U) / 2U;
+ }
+ }
+ break;
+ }
+#endif /* RCC_CFGR_USBPRE */
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR_ADCPRE)
+ case RCC_PERIPHCLK_ADC1:
+ {
+ /* Get the current ADC1 source */
+ srcclk = __HAL_RCC_GET_ADC1_SOURCE();
+#if defined(RCC_CFGR2_ADC1PRES)
+ /* Check if ADC1 clock selection is AHB */
+ if (srcclk == RCC_ADC1PLLCLK_OFF)
+ {
+ frequency = SystemCoreClock;
+ }
+ /* PLL clock has been selected */
+ else
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Frequency is the PLL frequency divided by ADC prescaler (1U/2U/4U/6U/8U/10U/12U/16U/32U/64U/128U/256U) */
+ frequency = RCC_GetPLLCLKFreq() / adc_pll_prediv_table[(srcclk >> POSITION_VAL(RCC_CFGR2_ADC1PRES)) & 0xFU];
+ }
+ }
+#else /* RCC_CFGR_ADCPRE */
+ /* ADC1 is set to PLCK2 frequency divided by 2U/4U/6U/8U */
+ frequency = HAL_RCC_GetPCLK2Freq() / (((srcclk >> POSITION_VAL(RCC_CFGR_ADCPRE)) + 1U) * 2U);
+#endif /* RCC_CFGR2_ADC1PRES */
+ break;
+ }
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR_ADCPRE */
+#if defined(RCC_CFGR2_ADCPRE12)
+ case RCC_PERIPHCLK_ADC12:
+ {
+ /* Get the current ADC12 source */
+ srcclk = __HAL_RCC_GET_ADC12_SOURCE();
+ /* Check if ADC12 clock selection is AHB */
+ if (srcclk == RCC_ADC12PLLCLK_OFF)
+ {
+ frequency = SystemCoreClock;
+ }
+ /* PLL clock has been selected */
+ else
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Frequency is the PLL frequency divided by ADC prescaler (1U/2U/4U/6/8U/10U/12U/16U/32U/64U/128U/256U) */
+ frequency = RCC_GetPLLCLKFreq() / adc_pll_prediv_table[(srcclk >> POSITION_VAL(RCC_CFGR2_ADCPRE12)) & 0xF];
+ }
+ }
+ break;
+ }
+#endif /* RCC_CFGR2_ADCPRE12 */
+#if defined(RCC_CFGR2_ADCPRE34)
+ case RCC_PERIPHCLK_ADC34:
+ {
+ /* Get the current ADC34 source */
+ srcclk = __HAL_RCC_GET_ADC34_SOURCE();
+ /* Check if ADC34 clock selection is AHB */
+ if (srcclk == RCC_ADC34PLLCLK_OFF)
+ {
+ frequency = SystemCoreClock;
+ }
+ /* PLL clock has been selected */
+ else
+ {
+ /* Check if PLL is ready */
+ if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY))
+ {
+ /* Frequency is the PLL frequency divided by ADC prescaler (1U/2U/4U/6U/8U/10U/12U/16U/32U/64U/128U/256U) */
+ frequency = RCC_GetPLLCLKFreq() / adc_pll_prediv_table[(srcclk >> POSITION_VAL(RCC_CFGR2_ADCPRE34)) & 0xF];
+ }
+ }
+ break;
+ }
+#endif /* RCC_CFGR2_ADCPRE34 */
+#if defined(RCC_CFGR3_TIM1SW)
+ case RCC_PERIPHCLK_TIM1:
+ {
+ /* Get the current TIM1 source */
+ srcclk = __HAL_RCC_GET_TIM1_SOURCE();
+
+ /* Check if PLL is ready and if TIM1 clock selection is PLL */
+ if ((srcclk == RCC_TIM1CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM1 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM1CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM1SW */
+#if defined(RCC_CFGR3_TIM2SW)
+ case RCC_PERIPHCLK_TIM2:
+ {
+ /* Get the current TIM2 source */
+ srcclk = __HAL_RCC_GET_TIM2_SOURCE();
+
+ /* Check if PLL is ready and if TIM2 clock selection is PLL */
+ if ((srcclk == RCC_TIM2CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM2 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM2CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM2SW */
+#if defined(RCC_CFGR3_TIM8SW)
+ case RCC_PERIPHCLK_TIM8:
+ {
+ /* Get the current TIM8 source */
+ srcclk = __HAL_RCC_GET_TIM8_SOURCE();
+
+ /* Check if PLL is ready and if TIM8 clock selection is PLL */
+ if ((srcclk == RCC_TIM8CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM8 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM8CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM8SW */
+#if defined(RCC_CFGR3_TIM15SW)
+ case RCC_PERIPHCLK_TIM15:
+ {
+ /* Get the current TIM15 source */
+ srcclk = __HAL_RCC_GET_TIM15_SOURCE();
+
+ /* Check if PLL is ready and if TIM15 clock selection is PLL */
+ if ((srcclk == RCC_TIM15CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM15 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM15CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM15SW */
+#if defined(RCC_CFGR3_TIM16SW)
+ case RCC_PERIPHCLK_TIM16:
+ {
+ /* Get the current TIM16 source */
+ srcclk = __HAL_RCC_GET_TIM16_SOURCE();
+
+ /* Check if PLL is ready and if TIM16 clock selection is PLL */
+ if ((srcclk == RCC_TIM16CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM16 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM16CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM16SW */
+#if defined(RCC_CFGR3_TIM17SW)
+ case RCC_PERIPHCLK_TIM17:
+ {
+ /* Get the current TIM17 source */
+ srcclk = __HAL_RCC_GET_TIM17_SOURCE();
+
+ /* Check if PLL is ready and if TIM17 clock selection is PLL */
+ if ((srcclk == RCC_TIM17CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM17 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM17CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM17SW */
+#if defined(RCC_CFGR3_TIM20SW)
+ case RCC_PERIPHCLK_TIM20:
+ {
+ /* Get the current TIM20 source */
+ srcclk = __HAL_RCC_GET_TIM20_SOURCE();
+
+ /* Check if PLL is ready and if TIM20 clock selection is PLL */
+ if ((srcclk == RCC_TIM20CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM20 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM20CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM20SW */
+#if defined(RCC_CFGR3_TIM34SW)
+ case RCC_PERIPHCLK_TIM34:
+ {
+ /* Get the current TIM34 source */
+ srcclk = __HAL_RCC_GET_TIM34_SOURCE();
+
+ /* Check if PLL is ready and if TIM34 clock selection is PLL */
+ if ((srcclk == RCC_TIM34CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if TIM34 clock selection is SYSCLK */
+ else if (srcclk == RCC_TIM34CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_TIM34SW */
+#if defined(RCC_CFGR3_HRTIM1SW)
+ case RCC_PERIPHCLK_HRTIM1:
+ {
+ /* Get the current HRTIM1 source */
+ srcclk = __HAL_RCC_GET_HRTIM1_SOURCE();
+
+ /* Check if PLL is ready and if HRTIM1 clock selection is PLL */
+ if ((srcclk == RCC_HRTIM1CLK_PLLCLK) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)))
+ {
+ frequency = RCC_GetPLLCLKFreq();
+ }
+ /* Check if HRTIM1 clock selection is SYSCLK */
+ else if (srcclk == RCC_HRTIM1CLK_HCLK)
+ {
+ frequency = SystemCoreClock;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_HRTIM1SW */
+#if defined(RCC_CFGR_SDPRE)
+ case RCC_PERIPHCLK_SDADC:
+ {
+ /* Get the current SDADC source */
+ srcclk = __HAL_RCC_GET_SDADC_SOURCE();
+ /* Frequency is the system frequency divided by SDADC prescaler (2U/4U/6U/8U/10U/12U/14U/16U/20U/24U/28U/32U/36U/40U/44U/48U) */
+ frequency = SystemCoreClock / sdadc_prescaler_table[(srcclk >> POSITION_VAL(RCC_CFGR_SDPRE)) & 0xF];
+ break;
+ }
+#endif /* RCC_CFGR_SDPRE */
+#if defined(RCC_CFGR3_CECSW)
+ case RCC_PERIPHCLK_CEC:
+ {
+ /* Get the current CEC source */
+ srcclk = __HAL_RCC_GET_CEC_SOURCE();
+
+ /* Check if HSI is ready and if CEC clock selection is HSI */
+ if ((srcclk == RCC_CECCLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)))
+ {
+ frequency = HSI_VALUE;
+ }
+ /* Check if LSE is ready and if CEC clock selection is LSE */
+ else if ((srcclk == RCC_CECCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)))
+ {
+ frequency = LSE_VALUE;
+ }
+ break;
+ }
+#endif /* RCC_CFGR3_CECSW */
+ default:
+ {
+ break;
+ }
+ }
+ return(frequency);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#if defined(RCC_CFGR2_ADC1PRES) || defined(RCC_CFGR2_ADCPRE12) || defined(RCC_CFGR2_ADCPRE34) || defined(RCC_CFGR_USBPRE) \
+ || defined(RCC_CFGR3_TIM1SW) || defined(RCC_CFGR3_TIM2SW) || defined(RCC_CFGR3_TIM8SW) || defined(RCC_CFGR3_TIM15SW) \
+ || defined(RCC_CFGR3_TIM16SW) || defined(RCC_CFGR3_TIM17SW) || defined(RCC_CFGR3_TIM20SW) || defined(RCC_CFGR3_TIM34SW) \
+ || defined(RCC_CFGR3_HRTIM1SW)
+
+/** @addtogroup RCCEx_Private_Functions
+ * @{
+ */
+static uint32_t RCC_GetPLLCLKFreq(void)
+{
+ uint32_t pllmul = 0U, pllsource = 0U, prediv = 0U, pllclk = 0U;
+
+ pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllmul = ( pllmul >> 18U) + 2U;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+#if defined(RCC_CFGR_PLLSRC_HSI_DIV2)
+ if (pllsource != RCC_PLLSOURCE_HSI)
+ {
+ prediv = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U;
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE/prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/2U * PLLMUL */
+ pllclk = (HSI_VALUE >> 1U) * pllmul;
+ }
+#else
+ prediv = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1U;
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE/prediv) * pllmul;
+ }
+ else
+ {
+ /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+ pllclk = (HSI_VALUE/prediv) * pllmul;
+ }
+#endif /* RCC_CFGR_PLLSRC_HSI_DIV2 */
+
+ return pllclk;
+}
+/**
+ * @}
+ */
+
+#endif /* RCC_CFGR2_ADC1PRES || RCC_CFGR2_ADCPRExx || RCC_CFGR3_TIMxSW || RCC_CFGR3_HRTIM1SW || RCC_CFGR_USBPRE */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim.c
new file mode 100644
index 00000000..964139f6
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim.c
@@ -0,0 +1,5492 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + Time Base Initialization
+ * + Time Base Start
+ * + Time Base Start Interruption
+ * + Time Base Start DMA
+ * + Time Output Compare/PWM Initialization
+ * + Time Output Compare/PWM Channel Configuration
+ * + Time Output Compare/PWM Start
+ * + Time Output Compare/PWM Start Interruption
+ * + Time Output Compare/PWM Start DMA
+ * + Time Input Capture Initialization
+ * + Time Input Capture Channel Configuration
+ * + Time Input Capture Start
+ * + Time Input Capture Start Interruption
+ * + Time Input Capture Start DMA
+ * + Time One Pulse Initialization
+ * + Time One Pulse Channel Configuration
+ * + Time One Pulse Start
+ * + Time Encoder Interface Initialization
+ * + Time Encoder Interface Start
+ * + Time Encoder Interface Start Interruption
+ * + Time Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + Time OCRef clear configuration
+ * + Time External Clock configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE ();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ Initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim TIM handle
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim TIM handle
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the Time Output Compare.
+ (+) Stop the Time Output Compare.
+ (+) Start the Time Output Compare and enable interrupt.
+ (+) Stop the Time Output Compare and disable interrupt.
+ (+) Start the Time Output Compare and enable DMA transfer.
+ (+) Stop the Time Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim TIM OC handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM OPWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the Time PWM.
+ (+) Stop the Time PWM.
+ (+) Start the Time PWM and enable interrupt.
+ (+) Stop the Time PWM and disable interrupt.
+ (+) Start the Time PWM and enable DMA transfer.
+ (+) Stop the Time PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the Time Input Capture.
+ (+) Stop the Time Input Capture.
+ (+) Start the Time Input Capture and enable interrupt.
+ (+) Stop the Time Input Capture and disable interrupt.
+ (+) Start the Time Input Capture and enable DMA transfer.
+ (+) Stop the Time Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in DMA mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in DMA mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the Time One Pulse.
+ (+) Stop the Time One Pulse.
+ (+) Start the Time One Pulse and enable interrupt.
+ (+) Stop the Time One Pulse and disable interrupt.
+ (+) Start the Time One Pulse and enable DMA transfer.
+ (+) Stop the Time One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and create the associated handle.
+ * @param htim TIM OnePulse handle
+ * @param OnePulseMode Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim TIM One Pulse handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be disable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the Time Encoder.
+ (+) Stop the Time Encoder.
+ (+) Start the Time Encoder and enable interrupt.
+ (+) Stop the Time Encoder and disable interrupt.
+ (+) Start the Time Encoder and enable DMA transfer.
+ (+) Stop the Time Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and create the associated handle.
+ * @param htim TIM Encoder Interface handle
+ * @param sConfig TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State= HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS bits */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
+
+ /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
+ tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim TIM Encoder handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2U */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1U */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2U */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2U */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1: The destination Buffer address for IC1.
+ * @param pData2: The destination Buffer address for IC2.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((((pData1 == 0U) || (pData2 == 0U) )) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ }
+ break;
+
+ case TIM_CHANNEL_ALL:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ default:
+ break;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if(Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1U */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ else if(Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2U */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2U */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim TIM handle
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ /* Capture compare 1 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+ {
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
+ {
+ HAL_TIM_IC_CaptureCallback(htim);
+ }
+ /* Output compare event */
+ else
+ {
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE);
+ HAL_TIM_PeriodElapsedCallback(htim);
+ }
+ }
+ /* TIM Break input event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK);
+ HAL_TIMEx_BreakCallback(htim);
+ }
+ }
+
+#if defined(TIM_FLAG_BREAK2)
+ /* TIM Break input 2 event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2);
+ HAL_TIMEx_Break2Callback(htim);
+ }
+ }
+#endif
+
+ /* TIM Trigger detection event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER);
+ HAL_TIM_TriggerCallback(htim);
+ }
+ }
+ /* TIM commutation event */
+ if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+ {
+ if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM);
+ HAL_TIMEx_CommutationCallback(htim);
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim TIM IC handle
+ * @param sConfig TIM Input Capture configuration structure
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+ __HAL_LOCK(htim);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim TIM One Pulse handle
+ * @param sConfig TIM One Pulse configuration structure
+ * @param OutputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
+{
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if(OutputChannel != InputChannel)
+ {
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Ouput compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ }
+ break;
+ default:
+ break;
+ }
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+return HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, ((BurstLength) >> 8U) + 1U);
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @param DataLength Data length. This parameter can be one value
+ * between 1 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t* BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+ assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U ) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, DataLength);
+ }
+ break;
+ default:
+ break;
+ }
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim TIM handle
+ * @param BurstRequestSrc TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will starts the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+return HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, ((BurstLength) >> 8U) + 1U);
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer multiple Data from the TIM peripheral to the memory
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will starts the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_DCR
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @param DataLength Data length. This parameter can be one value
+ * between 1 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+ uint32_t *BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+ assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if((BurstBuffer == 0U ) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, DataLength);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* configure the DMA Burst Mode */
+ htim->Instance->DCR = BurstBaseAddress | BurstLength;
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim TIM handle
+ * @param BurstRequestSrc TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch(BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+ }
+ break;
+ case TIM_DMA_CC1:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ break;
+ case TIM_DMA_CC2:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ break;
+ case TIM_DMA_CC3:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+ }
+ break;
+ case TIM_DMA_CC4:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+ }
+ break;
+ case TIM_DMA_COM:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ }
+ break;
+ case TIM_DMA_TRIGGER:
+ {
+ HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim TIM handle
+ * @param EventSource specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source
+ * @retval HAL status
+ * @note TIM_EVENTSOURCE_BREAK2 isn't relevant for STM32F37xx and STM32F38xx
+ * devices
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim TIM handle
+ * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+
+ /* Check ETR input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+ /* Reset the SMS and TS Bits */
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
+
+ /* Check ETR input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ }
+ break;
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI2 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR0:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+ }
+ break;
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1U */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+ }
+ break;
+
+ default:
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim TIM handle.
+ * @param TI1_Selection: Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2 = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Disable Trigger Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the ) and the Slave
+ * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim TIM handle.
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0U;
+
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) Timer Period elapsed callback
+ (+) Timer Output Compare callback
+ (+) Timer Input capture callback
+ (+) Timer Trigger callback
+ (+) Timer Error callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+
+}
+/**
+ * @brief Output Compare callback in non blocking mode
+ * @param htim TIM OC handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Input Capture callback in non blocking mode
+ * @param htim TIM IC handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base state
+ * @param htim TIM Base handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC state
+ * @param htim TIM Ouput Compare handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM state
+ * @param htim TIM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture state
+ * @param htim TIM IC handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode state
+ * @param htim TIM OPM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode state
+ * @param htim TIM Encoder handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Private_Functions TIM_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+
+ HAL_TIM_IC_CaptureCallback(htim);
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx TIM periheral
+ * @param Structure TIM Base configuration structure
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1 = 0U;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ /* Set the auto-reload preload */
+ MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = (uint32_t)Structure->Prescaler;
+
+ if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediatly */
+ TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+ * @brief Time Ouput Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4U);
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#else
+ /* Reset the Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+#endif
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8U);
+
+ if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+ }
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#else
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+#endif
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Time Ouput Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12U);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#else
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+#endif
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+ uint32_t tmpsmcr = 0U;
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+
+ }
+ break;
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ }
+ break;
+
+ case TIM_TS_ITR0:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR1:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR2:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4U);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12U);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2 = 0U;
+ uint32_t tmpccer = 0U;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param InputTriggerSource The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPRESCALER_DIV1 : ETRP Prescaler OFF.
+ * @arg TIM_ETRPRESCALER_DIV2 : ETRP frequency divided by 2.
+ * @arg TIM_ETRPRESCALER_DIV4 : ETRP frequency divided by 4.
+ * @arg TIM_ETRPRESCALER_DIV8 : ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPOLARITY_INVERTED : active low or falling edge active.
+ * @arg TIM_ETRPOLARITY_NONINVERTED : active high or rising edge active.
+ * @param ExtTRGFilter External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr = 0U;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @param ChannelState specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim_ex.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim_ex.c
new file mode 100644
index 00000000..cbdfce17
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_tim_ex.c
@@ -0,0 +1,2802 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer Extended peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal bread and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6)
+ * + Time OCRef clear configuration
+ * + Timer remapping capabilities configuration
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extended features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending from feature used :
+ (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+ (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+ (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE ();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+*/
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+#define BDTR_BKF_SHIFT (16U)
+#define BDTR_BK2F_SHIFT (20U)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config);
+
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
+ * @param htim TIM Encoder Interface handle
+ * @param sConfig TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if(htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ if(htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101U */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the TIM state*/
+ htim->State= HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1U, 2 and 3
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim TIM Hall Sensor handle
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel for Capture 1U*/
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
+
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim TIM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare.
+ (+) Stop the Complementary Output Compare.
+ (+) Start the Complementary Output Compare and enable interrupts.
+ (+) Stop the Complementary Output Compare and disable interrupts.
+ (+) Start the Complementary Output Compare and enable DMA transfers.
+ (+) Stop the Complementary Output Compare and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim TIM OC handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+{
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+ (+) Start the Complementary Input Capture measurement.
+ (+) Stop the Complementary Input Capture.
+ (+) Start the Complementary Input Capture and enable interrupts.
+ (+) Stop the Complementary Input Capture and disable interrupts.
+ (+) Start the Complementary Input Capture and enable DMA transfers.
+ (+) Stop the Complementary Input Capture and disable DMA transfers.
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpccer = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ if((htim->State == HAL_TIM_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if((htim->State == HAL_TIM_STATE_READY))
+ {
+ if(((uint32_t)pData == 0U ) && (Length > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA Period elapsed callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complemetary
+ * output.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Ouput */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Ouput */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure Output channels for OC and PWM mode.
+
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master synchronization.
+ (+) Configure timer remapping capabilities.
+ (+) Enable or disable channel grouping
+
+@endverbatim
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation Interrupt Request */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note this function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F303xE, STM32F358xx,
+ * STM32F398xx and STM32F303x8 up to 6 OC channels can be configured
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim,
+ TIM_OC_InitTypeDef* sConfig,
+ uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 5 in Output Compare */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 6 in Output Compare */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM PWM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be configured
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F303xE, STM32F358xx,
+ * STM32F398xx and STM32F303x8 up to 6 PWM channels can be configured
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
+ TIM_OC_InitTypeDef* sConfig,
+ uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel5*/
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode;
+ }
+ break;
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel6 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim TIM handle.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+ TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ uint32_t tmpcr2;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2U */
+ if (IS_TIM_TRGO2_INSTANCE(htim->Instance))
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2));
+
+ /* Clear the MMS2 bits */
+ tmpcr2 &= ~TIM_CR2_MMS2;
+ /* Select the TRGO2 source*/
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger2;
+ }
+
+ /* Reset the MMS Bits */
+ tmpcr2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ tmpsmcr &= ~TIM_SMCR_MSM;
+ /* Set master mode */
+ tmpsmcr |= sMasterConfig->MasterSlaveMode;
+
+ /* Update TIMx CR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ /* Update TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim TIM handle.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Reset the MMS Bits */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Reset the MSM Bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_MSM;
+ /* Set or Reset the MSM Bit */
+ htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim TIM handle
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef
+ structure that contains the BDTR Register configuration information
+ for the TIM peripheral.
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F358xx, STM32F303xE,
+ STM32F398xx and STM32F303x8 two break inputs can be configured.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+ uint32_t tmpbdtr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << BDTR_BKF_SHIFT));
+
+ if (IS_TIM_BKIN2_INSTANCE(htim->Instance))
+ {
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Set the BREAK2 input related BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << BDTR_BK2F_SHIFT));
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity);
+ }
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim TIM handle
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig)
+{
+ uint32_t tmpbdtr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_MOE, sBreakDeadTimeConfig->AutomaticOutput);
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8)
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/**
+ * @brief Configures the TIM1, TIM8, TIM16 and TIM20 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap1: specifies the first TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM8_ADC2_NONE: TIM8_ETR is not connected to any ADC2 AWD
+ * @arg TIM_TIM8_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM8_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM8_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @arg TIM_TIM20_ADC3_NONE: TIM20_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM20_ADC3_AWD1: TIM20_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM20_ADC3_AWD2: TIM20_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM20_ADC3_AWD3: TIM20_ETR is connected to ADC3 AWD3
+ * @param Remap2: specifies the second TIMremapping source (if any).
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC4_NONE: TIM1_ETR is not connected to any ADC4 AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC4_AWD1: TIM1_ETR is connected to ADC4 AWD1
+ * @arg TIM_TIM1_ADC4_AWD2: TIM1_ETR is connected to ADC4 AWD2
+ * @arg TIM_TIM1_ADC4_AWD3: TIM1_ETR is connected to ADC4 AWD3
+ * @arg TIM_TIM8_ADC3_NONE: TIM8_ETR is not connected to any ADC3 AWD
+ * @arg TIM_TIM8_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM8_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM8_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3
+ * @arg TIM_TIM16_NONE: Non significant value for TIM16
+ * @arg TIM_TIM20_ADC4_NONE: TIM20_ETR is not connected to any ADC4 AWD
+ * @arg TIM_TIM20_ADC4_AWD1: TIM20_ETR is connected to ADC4 AWD1
+ * @arg TIM_TIM20_ADC4_AWD2: TIM20_ETR is connected to ADC4 AWD2
+ * @arg TIM_TIM20_ADC4_AWD3: TIM20_ETR is connected to ADC4 AWD3
+ * @retval HAL status
+ */
+#elif defined(STM32F303xC) || defined(STM32F358xx)
+/**
+ * @brief Configures the TIM1, TIM8 and TIM16 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap1: specifies the first TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM8_ADC2_NONE: TIM8_ETR is not connected to any AWD
+ * @arg TIM_TIM8_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM8_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM8_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @param Remap2: specifies the second TIMremapping source (if any).
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC4_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC4_AWD1: TIM1_ETR is connected to ADC4 AWD1
+ * @arg TIM_TIM1_ADC4_AWD2: TIM1_ETR is connected to ADC4 AWD2
+ * @arg TIM_TIM1_ADC4_AWD3: TIM1_ETR is connected to ADC4 AWD3
+ * @arg TIM_TIM8_ADC3_NONE: TIM8_ETR is not connected to any AWD
+ * @arg TIM_TIM8_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM8_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM8_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3
+ * @retval HAL status
+ */
+#else /* STM32F334x8 */
+/**
+ * @brief Configures the TIM1, TIM8 and TIM16 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap1: specifies the first TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @param Remap2: specifies the second TIMremapping source (if any).
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC2_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC2_AWD1: TIM1_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM1_ADC2_AWD2: TIM1_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM1_ADC2_AWD3: TIM1_ETR is connected to ADC2 AWD3
+ * @retval HAL status
+ */
+#endif /* STM32F303xE || STM32F398xx || */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap1));
+ assert_param(IS_TIM_REMAP2(Remap2));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap1 | Remap2;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || STM32F334x8 */
+
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configures the TIM1 and TIM16 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap specifies the TIM remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIM1_ADC1_NONE: TIM1_ETR is not connected to any AWD (analog watchdog)
+ * @arg TIM_TIM1_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ * @arg TIM_TIM16_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_RTC: TIM16 TI1 is connected to RTC_clock
+ * @arg TIM_TIM16_HSE: TIM16 TI1 is connected to HSE/32
+ * @arg TIM_TIM16_MCO: TIM16 TI1 is connected to MCO
+ * @retval HAL status
+ */
+#else /* STM32F373xC || STM32F378xx */
+/**
+ * @brief Configures the TIM2 and TIM14 Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap specifies the TIM remapping source.
+ * This parameter can be one of the following values:
+ * STM32F373xC, STM32F378xx:
+ * @arg TIM_TIM2_TIM8_TRGO: TIM8 TRGOUT is connected to TIM2_ITR1
+ * @arg TIM_TIM2_ETH_PTP: PTP trigger output is connected to TIM2_ITR1
+ * @arg TIM_TIM2_USBFS_SOF: OTG FS SOF is connected to the TIM2_ITR1 input
+ * @arg TIM_TIM2_USBHS_SOF: OTG HS SOF is connected to the TIM2_ITR1 input
+ * @arg TIM_TIM14_GPIO: TIM14 TI1 is connected to GPIO
+ * @arg TIM_TIM14_RTC: TIM14 TI1 is connected to RTC_clock
+ * @arg TIM_TIM14_HSE: TIM14 TI1 is connected to HSE/32
+ * @arg TIM_TIM14_MCO: TIM14 TI1 is connected to MCO
+ * @retval HAL status
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ __HAL_LOCK(htim);
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ /* Set the Timer remapping configuration */
+ htim->Instance->OR = Remap;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Group channel 5 and channel 1, 2 or 3
+ * @param htim TIM handle.
+ * @param Channels specifies the reference signal(s) the OC5REF is combined with.
+ * This parameter can be any combination of the following values:
+ * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC
+ * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF
+ * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF
+ * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels)
+{
+ /* Check parameters */
+ assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_GROUPCH5(Channels));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Clear GC5Cx bit fields */
+ htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3|TIM_CCR5_GC5C2|TIM_CCR5_GC5C1);
+
+ /* Set GC5Cx bit fields */
+ htim->Instance->CCR5 |= Channels;
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @arg TIM_Channel_5: TIM Channel 5
+ * @arg TIM_Channel_6: TIM Channel 6
+ * @note For STM32F302xC, STM32F302xE, STM32F303xC, STM32F303xE, STM32F358xx,
+ * STM32F398xx and STM32F303x8 up to 6 OC channels can be configured
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+ TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel)
+{
+ uint32_t tmpsmcr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (sClearInputConfig->ClearInputSource)
+ {
+ case TIM_CLEARINPUTSOURCE_NONE:
+ {
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Clear the OCREF clear selection bit */
+ tmpsmcr &= ~TIM_SMCR_OCCS;
+
+ /* Clear the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set TIMx_SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_OCREFCLR:
+ {
+ /* Clear the OCREF clear selection bit */
+ htim->Instance->SMCR &= ~TIM_SMCR_OCCS;
+ }
+ break;
+
+ case TIM_CLEARINPUTSOURCE_ETR:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+
+ /* Set the OCREF clear selection bit */
+ htim->Instance->SMCR |= TIM_SMCR_OCCS;
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_2:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 2U */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_3:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 3U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_4:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 4U */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_5:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5CE;
+ }
+ }
+ break;
+ case TIM_CHANNEL_6:
+ {
+ if(sClearInputConfig->ClearInputState != RESET)
+ {
+ /* Enable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6CE;
+ }
+ else
+ {
+ /* Disable the Ocref clear feature for Channel 1U */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6CE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extension Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extended TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Hall commutation changed callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutationCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break detection callback in non blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Break2 detection callback in non blocking mode
+ * @param htim: TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_Break2Callback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permit to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface state
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Private_Functions
+ * @{
+ */
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ htim->State= HAL_TIM_STATE_READY;
+
+ HAL_TIMEx_CommutationCallback(htim);
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @param ChannelNState specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp = 0U;
+
+ tmp = TIM_CCER_CC1NE << Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Timer Ouput Compare 5 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC5E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC5M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC5P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 16U);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS5;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 8U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR5 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Ouput Compare 6 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The ouput configuration structure
+ * @retval None
+ */
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx,
+ TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx = 0U;
+ uint32_t tmpccer = 0U;
+ uint32_t tmpcr2 = 0U;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC6E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC6M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint32_t)~TIM_CCER_CC6P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 20U);
+
+ if(IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS6;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 10U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR6 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/stm32f3xx_hal_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/stm32f3xx_hal_conf.h
new file mode 100644
index 00000000..ffc0763e
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/stm32f3xx_hal_conf.h
@@ -0,0 +1,349 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_conf.h
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2018 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CONF_H
+#define __STM32F3xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+
+#define HAL_MODULE_ENABLED
+/*#define HAL_ADC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_CAN_MODULE_ENABLED */
+/*#define HAL_CEC_MODULE_ENABLED */
+/*#define HAL_NAND_MODULE_ENABLED */
+/*#define HAL_NOR_MODULE_ENABLED */
+/*#define HAL_PCCARD_MODULE_ENABLED */
+/*#define HAL_SRAM_MODULE_ENABLED */
+/*#define HAL_HRTIM_MODULE_ENABLED */
+/*#define HAL_OPAMP_MODULE_ENABLED */
+/*#define HAL_SDADC_MODULE_ENABLED */
+/*#define HAL_TSC_MODULE_ENABLED */
+/*#define HAL_COMP_MODULE_ENABLED */
+/*#define HAL_CRC_MODULE_ENABLED */
+/*#define HAL_CRYP_MODULE_ENABLED */
+/*#define HAL_DAC_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+/*#define HAL_LCD_MODULE_ENABLED */
+/*#define HAL_LPTIM_MODULE_ENABLED */
+/*#define HAL_RNG_MODULE_ENABLED */
+/*#define HAL_RTC_MODULE_ENABLED */
+/*#define HAL_SPI_MODULE_ENABLED */
+/*#define HAL_TIM_MODULE_ENABLED */
+/*#define HAL_UART_MODULE_ENABLED */
+/*#define HAL_USART_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_SMARTCARD_MODULE_ENABLED */
+/*#define HAL_SMBUS_MODULE_ENABLED */
+/*#define HAL_WWDG_MODULE_ENABLED */
+/*#define HAL_PCD_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief Time out for LSE start up value in ms.
+ */
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
+ * - External clock not generated on EVAL 373
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f3xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f3xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f3xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f3xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f3xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f3xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f3xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f3xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f3xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f3xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f3xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f3xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f3xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SDADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_sdadc.h"
+#endif /* HAL_SDADC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f3xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f3xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f3xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f3xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/system_stm32f3xx.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/system_stm32f3xx.c
new file mode 100644
index 00000000..9051dca3
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/lib/system_stm32f3xx.c
@@ -0,0 +1,317 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f3xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f3xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. This file configures the system clock as follows:
+ *=============================================================================
+ * Supported STM32F3xx device
+ *-----------------------------------------------------------------------------
+ * System Clock source | HSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB2 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * USB Clock | DISABLE
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f3xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Defines
+ * @{
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
+ This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+/* Moved the vector table forward, because the OpenBLT bootloader is located in the
+ * first part of flash.
+ */
+#define VECT_TAB_OFFSET 0x4000 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock there is no need to
+ call the 2 first functions listed above, since SystemCoreClock variable is
+ updated automatically.
+ */
+uint32_t SystemCoreClock = 8000000;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and the PLL configuration is reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= 0x00000001U;
+
+ /* Reset CFGR register */
+ RCC->CFGR &= 0xF87FC00CU;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= 0xFEF6FFFFU;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= 0xFFFBFFFFU;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */
+ RCC->CFGR &= 0xFF80FFFFU;
+
+ /* Reset PREDIV1[3:0] bits */
+ RCC->CFGR2 &= 0xFFFFFFF0U;
+
+ /* Reset USARTSW[1:0], I2CSW and TIMs bits */
+ RCC->CFGR3 &= 0xFF00FCCCU;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000U;
+
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f3xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+ pllmull = ( pllmull >> 18) + 2;
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+ if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
+ {
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+ }
+ else
+ {
+ /* HSI oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSI_VALUE / predivfactor) * pllmull;
+ }
+#else
+ if (pllsource == RCC_CFGR_PLLSRC_HSI_DIV2)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / predivfactor) * pllmull;
+ }
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+ break;
+ default: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/main.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/main.c
new file mode 100644
index 00000000..23610fe8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/main.c
@@ -0,0 +1,210 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Prog\main.c
+* \brief Demo program application source file.
+* \ingroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static void Init(void);
+static void SystemClock_Config(void);
+
+
+/************************************************************************************//**
+** \brief This is the entry point for the bootloader application and is called
+** by the reset interrupt vector after the C-startup routines executed.
+** \return Program exit code.
+**
+****************************************************************************************/
+int main(void)
+{
+ /* Initialize the microcontroller */
+ Init();
+
+ /* start the infinite program loop */
+ while (1)
+ {
+ /* Toggle LED with a fixed frequency. */
+ LedToggle();
+ }
+ /* Set program exit code. note that the program should never get here. */
+ return 0;
+} /*** end of main ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the microcontroller.
+** \return none.
+**
+****************************************************************************************/
+static void Init(void)
+{
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+ /* Configure the system clock. */
+ SystemClock_Config();
+ /* Initialize the timer driver. */
+ TimerInit();
+ /* Initialize the led driver. */
+ LedInit();
+} /*** end of Init ***/
+
+
+/************************************************************************************//**
+** \brief System Clock Configuration. This code was created by CubeMX and configures
+** the system clock.
+** \return none.
+**
+****************************************************************************************/
+static void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+ /* Initializes the CPU, AHB and APB busses clocks. */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
+ RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ /* Clock configuration incorrect or hardware failure. Hang the system to prevent
+ * damage.
+ */
+ while(1);
+ }
+
+ /* Initializes the CPU, AHB and APB busses clocks. */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+ {
+ /* Clock configuration incorrect or hardware failure. Hang the system to prevent
+ * damage.
+ */
+ while(1);
+ }
+} /*** end of SystemClock_Config ***/
+
+
+/************************************************************************************//**
+** \brief Initializes the Global MSP. This function is called from HAL_Init()
+** function to perform system level initialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* SYSCFG clock enable. */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ /* GPIO ports clock enable. */
+ __HAL_RCC_GPIOF_CLK_ENABLE();
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+
+ /* Set priority grouping. */
+ HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+ /* MemoryManagement_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
+ /* BusFault_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
+ /* UsageFault_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
+ /* SVCall_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0);
+ /* DebugMonitor_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
+ /* PendSV_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(PendSV_IRQn, 0, 0);
+ /* SysTick_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+
+ /* The STM32F3-Discovery board has a pull-up on the USB_DP line, which is always
+ * enabled by default. If the USB USER cable is connected (for example after a
+ * firmware update with the bootloader), this pull-up causes the USB host to try
+ * and enumerate the USB device. This enumeration will fail if this application itself
+ * does not make use of the USB peripheral. This failed enumeration is not a problem
+ * for this application, but will cause the bootloader to not enumerate properly after
+ * starting it via a system reset.
+ * To prevent enumeration by the USB host, the USB device needs to stay in a
+ * disconnected state, which is done by configuring the USB_DP line as a digital
+ * output and setting it to logic low.
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_12;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+ HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
+
+ /* Configure the LED GPIO pin. */
+ GPIO_InitStruct.Pin = GPIO_PIN_8;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+} /*** end of HAL_MspInit ***/
+
+
+/************************************************************************************//**
+** \brief Deinitializes the Global MSP. This function is called from HAL_DeInit()
+** function to perform system level Deinitialization (GPIOs, clock, DMA,
+** interrupt).
+** \return none.
+**
+****************************************************************************************/
+void HAL_MspDeInit(void)
+{
+ /* Deconfigure GPIO pin for the LED. */
+ HAL_GPIO_WritePin(GPIOE, GPIO_PIN_8, GPIO_PIN_RESET);
+ HAL_GPIO_DeInit(GPIOE, GPIO_PIN_8);
+
+ /* GPIO ports clock disable. */
+ __HAL_RCC_GPIOA_CLK_DISABLE();
+ __HAL_RCC_GPIOE_CLK_DISABLE();
+ __HAL_RCC_GPIOF_CLK_DISABLE();
+ /* SYSCFG clock disable. */
+ __HAL_RCC_SYSCFG_CLK_DISABLE();
+} /*** end of HAL_MspDeInit ***/
+
+
+/*********************************** end of main.c *************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/prog.dox b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/prog.dox
new file mode 100644
index 00000000..31a25232
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/prog.dox
@@ -0,0 +1,16 @@
+/**
+\defgroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio User Program
+\ingroup ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+\brief User Program.
+\details The intention of the demo user program is two-fold. (1) To test the
+ bootloader, you need some sort of firmware to see if you can perform a
+ firmware update with the bootloader. This program can be used for this
+ purpose. (2) To make firmware programmable by the bootloader, a few
+ adjustments to the firmware are required. The demo user program serves as an
+ example for how these adjustments can be implemented. Additional details on
+ this subject can be found in the port specifics documentation, which is
+ available at:
+ https://www.feaser.com/openblt/doku.php?id=manual:ports:armcm4_stm32f3.
+*/
+
+
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/startup_stm32f303xc.s b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/startup_stm32f303xc.s
new file mode 100644
index 00000000..2314b8b8
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/startup_stm32f303xc.s
@@ -0,0 +1,472 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f303xc.s
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief STM32F303xB/STM32F303xC devices vector table for Atollic
+ * TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address,
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT 2014 STMicroelectronics
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m4
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* Atollic update: set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex-M4. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMP_STAMP_IRQHandler
+ .word RTC_WKUP_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_TSC_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN_TX_IRQHandler
+ .word USB_LP_CAN_RX0_IRQHandler
+ .word CAN_RX1_IRQHandler
+ .word CAN_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTC_Alarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word TIM8_BRK_IRQHandler
+ .word TIM8_UP_IRQHandler
+ .word TIM8_TRG_COM_IRQHandler
+ .word TIM8_CC_IRQHandler
+ .word ADC3_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word ADC4_IRQHandler
+ .word 0
+ .word 0
+ .word COMP1_2_3_IRQHandler
+ .word COMP4_5_6_IRQHandler
+ .word COMP7_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word USB_HP_IRQHandler
+ .word USB_LP_IRQHandler
+ .word USBWakeUp_RMP_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word FPU_IRQHandler
+ .word 0x55AA11EE // Reserved for OpenBLT checksum
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_TSC_IRQHandler
+ .thumb_set EXTI2_TSC_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN_TX_IRQHandler
+ .thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN_RX0_IRQHandler
+ .thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
+
+ .weak CAN_RX1_IRQHandler
+ .thumb_set CAN_RX1_IRQHandler,Default_Handler
+
+ .weak CAN_SCE_IRQHandler
+ .thumb_set CAN_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_IRQHandler
+ .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_IRQHandler
+ .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_IRQHandler
+ .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak ADC3_IRQHandler
+ .thumb_set ADC3_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_IRQHandler
+ .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+ .weak ADC4_IRQHandler
+ .thumb_set ADC4_IRQHandler,Default_Handler
+
+ .weak COMP1_2_3_IRQHandler
+ .thumb_set COMP1_2_3_IRQHandler,Default_Handler
+
+ .weak COMP4_5_6_IRQHandler
+ .thumb_set COMP4_5_6_IRQHandler,Default_Handler
+
+ .weak COMP7_IRQHandler
+ .thumb_set COMP7_IRQHandler,Default_Handler
+
+ .weak USB_HP_IRQHandler
+ .thumb_set USB_HP_IRQHandler,Default_Handler
+
+ .weak USB_LP_IRQHandler
+ .thumb_set USB_LP_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_RMP_IRQHandler
+ .thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/stm32f30_flash.ld b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/stm32f30_flash.ld
new file mode 100644
index 00000000..c7604323
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/stm32f30_flash.ld
@@ -0,0 +1,198 @@
+/*
+******************************************************************************
+File: stm32f30_flash.ld
+Info: Generated by Atollic TrueSTUDIO(R) 9.0.0 2018-03-16
+
+Abstract: Linker script for STM32F303VC device
+ Set heap size, stack size, stack location, memory areas and
+ sections according to application requirements.
+
+The MIT License (MIT)
+Copyright (c) 2018 STMicroelectronics
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x2000a000; /* end of 40K RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x800; /* required amount of heap */
+_Min_Stack_Size = 0x800; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08004000, LENGTH = 256K-16K
+ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K
+ MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
+ CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ _siccmram = LOADADDR(.ccmram);
+
+ /* CCM-RAM section
+ *
+ * IMPORTANT NOTE!
+ * If initialized variables will be placed in this section,
+ * the startup code needs to be modified to copy the init-values.
+ */
+ .ccmram :
+ {
+ . = ALIGN(4);
+ _sccmram = .; /* create a global symbol at ccmram start */
+ *(.ccmram)
+ *(.ccmram*)
+
+ . = ALIGN(4);
+ _eccmram = .; /* create a global symbol at ccmram end */
+ } >CCMRAM AT> FLASH
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(4);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(4);
+ } >RAM
+
+ /* MEMORY_bank1 section, code must be located here explicitly */
+ /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
+ .memory_b1_text :
+ {
+ *(.mb1text) /* .mb1text sections (code) */
+ *(.mb1text*) /* .mb1text* sections (code) */
+ *(.mb1rodata) /* read-only data (constants) */
+ *(.mb1rodata*)
+ } >MEMORY_B1
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/timer.c b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/timer.c
new file mode 100644
index 00000000..db0a9f74
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/timer.c
@@ -0,0 +1,77 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Prog\timer.c
+* \brief Timer driver source file.
+* \ingroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "header.h" /* generic header */
+
+
+/************************************************************************************//**
+** \brief Initializes the timer.
+** \return none.
+**
+****************************************************************************************/
+void TimerInit(void)
+{
+ /* Configure the Systick interrupt time for 1 millisecond. */
+ HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+ /* Configure the Systick. */
+ HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
+ /* SysTick_IRQn interrupt configuration. */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+} /*** end of TimerInit ***/
+
+
+/************************************************************************************//**
+** \brief Obtains the counter value of the millisecond timer.
+** \return Current value of the millisecond timer.
+**
+****************************************************************************************/
+unsigned long TimerGet(void)
+{
+ /* Read and return the tick counter value. */
+ return HAL_GetTick();
+} /*** end of TimerGet ***/
+
+
+/************************************************************************************//**
+** \brief Interrupt service routine of the timer.
+** \return none.
+**
+****************************************************************************************/
+void SysTick_Handler(void)
+{
+ /* Increment the tick counter. */
+ HAL_IncTick();
+ /* Invoke the system tick handler. */
+ HAL_SYSTICK_IRQHandler();
+} /*** end of TimerISRHandler ***/
+
+
+/*********************************** end of timer.c ************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/timer.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/timer.h
new file mode 100644
index 00000000..f766d963
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Prog/timer.h
@@ -0,0 +1,38 @@
+/************************************************************************************//**
+* \file Demo\ARMCM4_STM32F3_Discovery_F303VC_TrueStudio\Prog\timer.h
+* \brief Timer driver header file.
+* \ingroup Prog_ARMCM4_STM32F3_Discovery_F303VC_TrueStudio
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+#ifndef TIMER_H
+#define TIMER_H
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+void TimerInit(void);
+unsigned long TimerGet(void);
+
+#endif /* TIMER_H */
+/*********************************** end of timer.h ************************************/
diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/demo.dox b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/demo.dox
new file mode 100644
index 00000000..bbe0de81
--- /dev/null
+++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/demo.dox
@@ -0,0 +1,9 @@
+/**
+\defgroup ARMCM4_STM32F3_Discovery_F303VC_TrueStudio Demo for STM32F3-Discovery/TrueStudio
+\ingroup Demos
+\brief Preconfigured programs for the STM32F3-Discovery board and the Atollic TrueStudio toolchain.
+\details For detailed getting started instructions, refer to:
+ https://www.feaser.com/openblt/doku.php?id=manual:demos:stm32f3_discovery_truestudio.
+*/
+
+
diff --git a/Target/Source/ARMCM4_STM32F3/usb.c b/Target/Source/ARMCM4_STM32F3/usb.c
new file mode 100644
index 00000000..e074aeec
--- /dev/null
+++ b/Target/Source/ARMCM4_STM32F3/usb.c
@@ -0,0 +1,491 @@
+/************************************************************************************//**
+* \file Source\ARMCM4_STM32F3\usb.c
+* \brief Bootloader USB communication interface source file.
+* \ingroup Target_ARMCM4_STM32F3
+* \internal
+*----------------------------------------------------------------------------------------
+* C O P Y R I G H T
+*----------------------------------------------------------------------------------------
+* Copyright (c) 2018 by Feaser http://www.feaser.com All rights reserved
+*
+*----------------------------------------------------------------------------------------
+* L I C E N S E
+*----------------------------------------------------------------------------------------
+* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as published by the Free
+* Software Foundation, either version 3 of the License, or (at your option) any later
+* version.
+*
+* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+* PURPOSE. See the GNU General Public License for more details.
+*
+* You have received a copy of the GNU General Public License along with OpenBLT. It
+* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
+*
+* \endinternal
+****************************************************************************************/
+
+/****************************************************************************************
+* Include files
+****************************************************************************************/
+#include "boot.h" /* bootloader generic header */
+#if (BOOT_COM_USB_ENABLE > 0)
+#include "usb.h" /* USB bootloader driver */
+#include "usbd_core.h" /* USB driver core */
+#include "usbd_desc.h" /* USB driver descriptor */
+#include "usbd_bulk.h" /* USB driver bulk device */
+
+
+/****************************************************************************************
+* Macro definitions
+****************************************************************************************/
+/** \brief Total number of fifo buffers. */
+#define FIFO_MAX_BUFFERS (2)
+/** \brief Invalid value for a fifo buffer handle. */
+#define FIFO_ERR_INVALID_HANDLE (255)
+/** \brief Number of bytes that fit in the fifo pipe. */
+#define FIFO_PIPE_SIZE (64)
+
+
+/****************************************************************************************
+* Type definitions
+****************************************************************************************/
+/** \brief Structure type for fifo control. */
+typedef struct t_fifo_ctrl
+{
+ blt_int8u *startptr; /**< pointer to start of buffer */
+ blt_int8u *endptr; /**< pointer to end of buffer */
+ blt_int8u *readptr; /**< pointer to next read location */
+ blt_int8u *writeptr; /**< pointer to next free location */
+ blt_int8u length; /**< number of buffer elements */
+ blt_int8u entries; /**< # of full buffer elements */
+ blt_int8u handle; /**< handle of the buffer */
+ struct t_fifo_ctrl *fifoctrlptr; /**< pointer to free buffer control */
+} tFifoCtrl;
+
+/** \brief Structure type for a fifo pipe. */
+typedef struct
+{
+ blt_int8u handle; /**< fifo handle */
+ blt_int8u data[FIFO_PIPE_SIZE]; /**< fifo data buffer */
+} tFifoPipe; /**< USB pipe fifo type */
+
+
+/****************************************************************************************
+* Function prototypes
+****************************************************************************************/
+static blt_bool UsbReceiveByte(blt_int8u *data);
+static blt_bool UsbTransmitByte(blt_int8u data);
+static void UsbFifoMgrInit(void);
+static blt_int8u UsbFifoMgrCreate(blt_int8u *buffer, blt_int8u length);
+static blt_bool UsbFifoMgrWrite(blt_int8u handle, blt_int8u data);
+static blt_bool UsbFifoMgrRead(blt_int8u handle, blt_int8u *data);
+static blt_int8u UsbFifoMgrScan(blt_int8u handle);
+
+
+/****************************************************************************************
+* Local data declarations
+****************************************************************************************/
+/** \brief Local variable that holds the fifo control structures. */
+static tFifoCtrl fifoCtrl[FIFO_MAX_BUFFERS];
+/** \brief Local pointer that points to the next free fifo control structure. */
+static tFifoCtrl *fifoCtrlFree;
+/** \brief Fifo pipe used for the bulk in endpoint. */
+static tFifoPipe fifoPipeBulkIN;
+/** \brief Fifo pipe used for the bulk out endpoint. */
+static tFifoPipe fifoPipeBulkOUT;
+/** \brief USB device handle. */
+static USBD_HandleTypeDef hUsbDeviceFS;
+
+
+/************************************************************************************//**
+** \brief Initializes the USB communication interface.
+** \return none.
+**
+****************************************************************************************/
+void UsbInit(void)
+{
+ /* initialize the FIFO manager */
+ UsbFifoMgrInit();
+ /* place 2 buffers under FIFO management */
+ fifoPipeBulkIN.handle = UsbFifoMgrCreate(fifoPipeBulkIN.data, FIFO_PIPE_SIZE);
+ fifoPipeBulkOUT.handle = UsbFifoMgrCreate(fifoPipeBulkOUT.data, FIFO_PIPE_SIZE);
+ /* validate fifo handles */
+ ASSERT_RT((fifoPipeBulkIN.handle != FIFO_ERR_INVALID_HANDLE) && \
+ (fifoPipeBulkOUT.handle != FIFO_ERR_INVALID_HANDLE));
+ /* initialize the USB device libary */
+ USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
+ /* register the bootloader's custom USB Bulk based class */
+ USBD_RegisterClass(&hUsbDeviceFS, &USBD_Bulk);
+ /* start the USB device */
+ USBD_Start(&hUsbDeviceFS);
+ /* perform low level connect of the device */
+ HAL_PCD_DevConnect((PCD_HandleTypeDef *)hUsbDeviceFS.pData);
+} /*** end of UsbInit ***/
+
+
+/************************************************************************************//**
+** \brief Releases the USB communication interface.
+** \return none.
+**
+****************************************************************************************/
+void UsbFree(void)
+{
+ /* perform low level disconnect of the device */
+ HAL_PCD_DevDisconnect((PCD_HandleTypeDef *)hUsbDeviceFS.pData);
+ /* uninitialize the device */
+ USBD_DeInit(&hUsbDeviceFS);
+} /*** end of UsbFree ***/
+
+
+/************************************************************************************//**
+** \brief Transmits a packet formatted for the communication interface.
+** \param data Pointer to byte array with data that it to be transmitted.
+** \param len Number of bytes that are to be transmitted.
+** \return none.
+**
+****************************************************************************************/
+void UsbTransmitPacket(blt_int8u *data, blt_int8u len)
+{
+ blt_int16u data_index;
+ blt_bool result;
+
+ /* verify validity of the len-paramenter */
+ ASSERT_RT(len <= BOOT_COM_USB_TX_MAX_DATA);
+
+ /* first transmit the length of the packet */
+ result = UsbTransmitByte(len);
+ ASSERT_RT(result == BLT_TRUE);
+
+ /* transmit all the packet bytes one-by-one */
+ for (data_index = 0; data_index < len; data_index++)
+ {
+ /* keep the watchdog happy */
+ CopService();
+ /* write byte */
+ result = UsbTransmitByte(data[data_index]);
+ ASSERT_RT(result == BLT_TRUE);
+ }
+} /*** end of UsbTransmitPacket ***/
+
+
+/************************************************************************************//**
+** \brief Receives a communication interface packet if one is present.
+** \param data Pointer to byte array where the data is to be stored.
+** \param len Pointer where the length of the packet is to be stored.
+** \return BLT_TRUE if a packet was received, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+blt_bool UsbReceivePacket(blt_int8u *data, blt_int8u *len)
+{
+ static blt_int8u xcpCtoReqPacket[BOOT_COM_USB_RX_MAX_DATA+1]; /* one extra for length */
+ static blt_int8u xcpCtoRxLength;
+ static blt_bool xcpCtoRxInProgress = BLT_FALSE;
+
+ /* poll USB interrupt flags to process USB related events */
+ HAL_PCD_IRQHandler((PCD_HandleTypeDef *)hUsbDeviceFS.pData);
+
+ /* start of cto packet received? */
+ if (xcpCtoRxInProgress == BLT_FALSE)
+ {
+ /* store the message length when received */
+ if (UsbReceiveByte(&xcpCtoReqPacket[0]) == BLT_TRUE)
+ {
+ if ( (xcpCtoReqPacket[0] > 0) &&
+ (xcpCtoReqPacket[0] <= BOOT_COM_USB_RX_MAX_DATA) )
+ {
+ /* indicate that a cto packet is being received */
+ xcpCtoRxInProgress = BLT_TRUE;
+ /* reset packet data count */
+ xcpCtoRxLength = 0;
+ }
+ }
+ }
+ else
+ {
+ /* store the next packet byte */
+ if (UsbReceiveByte(&xcpCtoReqPacket[xcpCtoRxLength+1]) == BLT_TRUE)
+ {
+ /* increment the packet data count */
+ xcpCtoRxLength++;
+
+ /* check to see if the entire packet was received */
+ if (xcpCtoRxLength == xcpCtoReqPacket[0])
+ {
+ /* copy the packet data */
+ CpuMemCopy((blt_int32u)data, (blt_int32u)&xcpCtoReqPacket[1], xcpCtoRxLength);
+ /* done with cto packet reception */
+ xcpCtoRxInProgress = BLT_FALSE;
+ /* set the packet length */
+ *len = xcpCtoRxLength;
+ /* packet reception complete */
+ return BLT_TRUE;
+ }
+ }
+ }
+ /* packet reception not yet complete */
+ return BLT_FALSE;
+} /*** end of UsbReceivePacket ***/
+
+
+/************************************************************************************//**
+** \brief Receives a communication interface byte if one is present.
+** \param data Pointer to byte where the data is to be stored.
+** \return BLT_TRUE if a byte was received, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+static blt_bool UsbReceiveByte(blt_int8u *data)
+{
+ blt_bool result;
+
+ /* obtain data from the fifo */
+ result = UsbFifoMgrRead(fifoPipeBulkOUT.handle, data);
+ return result;
+} /*** end of UsbReceiveByte ***/
+
+
+/************************************************************************************//**
+** \brief Transmits a communication interface byte.
+** \param data Value of byte that is to be transmitted.
+** \return BLT_TRUE if the byte was transmitted, BLT_FALSE otherwise.
+**
+****************************************************************************************/
+static blt_bool UsbTransmitByte(blt_int8u data)
+{
+ blt_bool result;
+
+ /* write data from to fifo */
+ result = UsbFifoMgrWrite(fifoPipeBulkIN.handle, data);
+ return result;
+} /*** end of UsbTransmitByte ***/
+
+
+/************************************************************************************//**
+** \brief Checks if there is still data left to transmit and if so submits it
+** for transmission with the USB endpoint.
+** \return none.
+**
+****************************************************************************************/
+void UsbTransmitPipeBulkIN(void)
+{
+ /* USB_Tx_Buffer is static for run-time optimalization */
+ static uint8_t USB_Tx_Buffer[BULK_DATA_MAX_PACKET_SIZE];
+ blt_int8u nr_of_bytes_for_tx_endpoint;
+ blt_int8u byte_counter;
+ blt_int8u byte_value;
+ blt_bool result;
+
+ /* read how many bytes should be transmitted */
+ nr_of_bytes_for_tx_endpoint = UsbFifoMgrScan(fifoPipeBulkIN.handle);
+ /* only continue if there is actually data left to transmit */
+ if (nr_of_bytes_for_tx_endpoint == 0)
+ {
+ return;
+ }
+ /* make sure to not transmit more than the USB endpoint can handle */
+ if (nr_of_bytes_for_tx_endpoint > BULK_DATA_MAX_PACKET_SIZE)
+ {
+ nr_of_bytes_for_tx_endpoint = BULK_DATA_MAX_PACKET_SIZE;
+ }
+ /* copy the transmit data to the transmit buffer */
+ for (byte_counter=0; byte_counter < nr_of_bytes_for_tx_endpoint; byte_counter++)
+ {
+ /* obtain data from the fifo */
+ result = UsbFifoMgrRead(fifoPipeBulkIN.handle, &byte_value);
+ ASSERT_RT(result == BLT_TRUE);
+ /* store it in the endpoint's RAM */
+ USB_Tx_Buffer[byte_counter] = byte_value;
+ }
+ /* copy data to endpoint's RAM and start the transmission */
+ USBD_LL_Transmit(&hUsbDeviceFS, BULK_IN_EP, &USB_Tx_Buffer[0],
+ nr_of_bytes_for_tx_endpoint);
+} /*** end of UsbTransmitPipeBulkIN ***/
+
+
+/************************************************************************************//**
+** \brief Stores data that was received on the Bulk OUT pipe in the fifo.
+** \return none.
+**
+****************************************************************************************/
+void UsbReceivePipeBulkOUT(blt_int8u epnum)
+{
+ blt_int16u USB_Rx_Cnt=0;
+ blt_int8u *usbRxBufferPtr;
+ blt_int16u byte_counter;
+ blt_bool result;
+
+ /* Get the received data buffer and the number of received bytes */
+ usbRxBufferPtr = USBD_Bulk_GetRxBufferPtr();
+ USB_Rx_Cnt = USBD_LL_GetRxDataSize(&hUsbDeviceFS, epnum);
+
+ /* USB data will be immediately processed, this allow next USB traffic being
+ * NAKed till the end of the USART Xfer
+ */
+ for (byte_counter=0; byte_counterhandle = i;
+ pbc1->fifoctrlptr = pbc2;
+ pbc1++;
+ pbc2++;
+ }
+ /* initialize handle for the last one and use null-pointer for the next free fifo */
+ pbc1->handle = i;
+ pbc1->fifoctrlptr = (tFifoCtrl *)0;
+ fifoCtrlFree = &fifoCtrl[0];
+} /*** end of UsbFifoMgrInit ***/
+
+
+/************************************************************************************//**
+** \brief Places a data storage array under fifo management control. A handle
+** for identifying the fifo in subsequent fifo management function
+** calls is returned, if successful.
+** \param buffer Pointer to the first element in the data storage fifo.
+** \param length Maximum number of data elements that can be stored in the fifo.
+** \return Fifo handle if successfull, or FIFO_ERR_INVALID_HANDLE.
+**
+****************************************************************************************/
+static blt_int8u UsbFifoMgrCreate(blt_int8u *buffer, blt_int8u length)
+{
+ tFifoCtrl *pbc;
+
+ /* first determine if these is still a free fifo control available */
+ if (fifoCtrlFree == (tFifoCtrl *)0)
+ {
+ return FIFO_ERR_INVALID_HANDLE;
+ }
+ /* store pointer to free fifo and update pointer to next free one */
+ pbc = fifoCtrlFree;
+ fifoCtrlFree = pbc->fifoctrlptr;
+
+ /* initialize the buffer control */
+ pbc->length = length;
+ pbc->readptr = buffer;
+ pbc->writeptr = buffer;
+ pbc->entries = 0;
+ pbc->startptr = buffer;
+ pbc->endptr = (blt_int8u *)(buffer + length - 1);
+
+ /* return the handle to the successfully created fifo control */
+ return pbc->handle;
+} /*** end of UsbFifoMgrCreate ***/
+
+
+/************************************************************************************//**
+** \brief Stores data in the fifo.
+** \param handle Identifies the fifo to write data to.
+** \param data Pointer to the data that is to be written to the fifo.
+** \return BLT_TRUE if the data was successfully stored in the fifo, BLT_FALSE
+** otherwise.
+**
+****************************************************************************************/
+static blt_bool UsbFifoMgrWrite(blt_int8u handle, blt_int8u data)
+{
+ /* check the validity of the handle parameter */
+ ASSERT_RT(handle < FIFO_MAX_BUFFERS);
+ /* check if fifo is full */
+ if (fifoCtrl[handle].entries == fifoCtrl[handle].length)
+ {
+ return BLT_FALSE;
+ }
+ /* copy data to fifo */
+ *fifoCtrl[handle].writeptr = data;
+ /* data written so update number of entries */
+ fifoCtrl[handle].entries++;
+ /* update write pointer */
+ fifoCtrl[handle].writeptr++;
+ /* check end of fifo */
+ if (fifoCtrl[handle].writeptr > fifoCtrl[handle].endptr)
+ {
+ /* set write pointer to start of the cyclic fifo */
+ fifoCtrl[handle].writeptr = fifoCtrl[handle].startptr;
+ }
+ /* still here so all is okay */
+ return BLT_TRUE;
+} /*** end of UsbFifoMgrWrite ***/
+
+
+/************************************************************************************//**
+** \brief Retrieves data from the fifo.
+** \param handle Identifies the fifo to read data from.
+** \param data Pointer to where the read data is to be stored.
+** \return BLT_TRUE if the data was successfully read from the fifo, BLT_FALSE
+** otherwise.
+**
+****************************************************************************************/
+static blt_bool UsbFifoMgrRead(blt_int8u handle, blt_int8u *data)
+{
+ /* check the validity of the handle parameter */
+ ASSERT_RT(handle < FIFO_MAX_BUFFERS);
+ /* check if fifo is empty */
+ if (fifoCtrl[handle].entries == 0)
+ {
+ return BLT_FALSE;
+ }
+ /* read the data */
+ *data = *fifoCtrl[handle].readptr;
+ /* data read so update number of entries */
+ fifoCtrl[handle].entries--;
+ /* update read pointer */
+ fifoCtrl[handle].readptr++;
+ /* check end of fifo */
+ if (fifoCtrl[handle].readptr > fifoCtrl[handle].endptr)
+ {
+ /* set read pointer to start of the cyclic fifo */
+ fifoCtrl[handle].readptr = fifoCtrl[handle].startptr;
+ }
+ /* still here so all is good */
+ return BLT_TRUE;
+} /*** end of UsbFifoMgrRead ***/
+
+
+/************************************************************************************//**
+** \brief Returns the number of data entries currently present in the fifo.
+** \param handle Identifies the fifo that is to be scanned.
+** \return Number of data entries in the fifo if successful, otherwise 0.
+**
+****************************************************************************************/
+static blt_int8u UsbFifoMgrScan(blt_int8u handle)
+{
+ /* check the validity of the handle parameter */
+ ASSERT_RT(handle < FIFO_MAX_BUFFERS);
+ /* read and return the number of data entries */
+ return fifoCtrl[handle].entries;
+} /*** end of UsbFifoMgrScan ***/
+#endif /* BOOT_COM_USB_ENABLE > 0 */
+
+
+/*********************************** end of usb.c **************************************/