+
+ Update historyV1.5.0 / 05-December-2015Main
+Changes
+- Add support of the STM32F070xB, STM32F070x6 and STM32F030xC devices.
- stm32f0xx_flash.c/.h: update for STM32F070xB, STM32F070x6 and STM32F030xC devices
V1.4.0 / 24-July-2014Main
+Changes
+- Add support of the STM32F091 devices.
- stm32f0xx_dma.c/.h: update for STM32F091 devices
- Add the support of the DMA2 channels.
- Add new function "void DMA_RemapConfig(DMA_TypeDef* DMAy, uint32_t DMAx_CHy_RemapRequest);"
- stm32f0xx_flash.c/.h: update for STM32F091 devices
- Add definition for new option bytes on the STM32F091 devices.
- stm32f0xx_gpio.c/.h: update for STM32F091 devices
- Update the GPIO_AF definition comments with the new supported alternate functions
- stm32f0xx_rcc.c/.h: update for STM32F091 devices
- Add USART3CLK_Frequency fields in the RCC_ClocksTypeDef structure.
+
- Add definition for USART3 clock sources
- Add USART4, USART5, USART6, USART7 and USART8 clock and reset configuration.
- Add DMA2 clock configuration.
- stm32f0xx_syscfg.c/.h: update for STM32F091 devices
- Add new function "void SYSCFG_IRDAEnvSelection(uint32_t SYSCFG_IRDAEnv);"
- Add new function "uint32_t SYSCFG_GetPendingIT(uint32_t ITSourceLine);"
- stm32f0xx_usart.c/.h: update for STM32F091 devices
- Add support of the USART3,USART4, USART5, USART6, USART7 and USART8.
- stm32f0xx_pwr.c
- Fix
+PWR_EnterSTANDBYMode() to not clear Wakeup flag (WUF), this flag need
+to be cleared at application level before to call this function
- PWR_EnterSleepMode():
+update usage of __WFE() in low power entry function. If there is a
+pending event, calling __WFE() instruction, the CortexM0 core will not
+enter to sleep mode. The solution is to make the call below: the first
+__WFE() is always ignored and clears the event if one was already
+pending, the second is always applied
__SEV()
__WFE()
__WFE()
V1.3.0 / 16-January-2014Main
+Changes
+- Add support of the STM32042 and STM32F072 devices.
- Update to support the new STM32F0xx family devices names.
- STM32F0XX_MD replaced by STM32F051
- STM32F0XX_LD replaced by STM32F031
- STM32F030x8 and STM32F030x6 replaced by STM32F030
- Add Clock Recovery System(CRS) driver.
- Add CAN driver.
- Update RCC driver to manage the High Speed Internal RC48MHz oscillator.
- stm32f0xx_adc.c/.h: update for STM32F042 and STM32F072 devices
- Add note to no more use the ADC_JitterOff definition as obsolete and maintained for legacy purpose. They are replaced by ADC_ClockMode definition.
- Add new ADC_ClockMode definition for proper ADC clock configuration.
- Update ADC_FLAG_ADSTP definition.
- Update ADC_FLAG_ADCAL definition.
- Add ADC_ClockModeConfig() function for proper ADC clock configuration.
- Add note to no more use the ADC_JitterCmd() function as obsolete.
- stm32f0xx_comp.c/.h: update for STM32F042 and STM32F072 devices
- Add define for the COMP_InvertingInput_DAC2.
- stm32f0xx_crc.c/.h: update for STM32F042 and STM32F072 devices
- Add definition for the CRC Polynomial Size.
- Add CRC_SetPolynomial(), CRC_CalcCRC16bits(), CRC_PolynomialSizeSelect(), CRC_CalcCRC16bits(), CRC_CalcCRC8bits() functions for the polynomial configuration management.
- stm32f0xx_dac.c/.h: update for STM32F042 and STM32F072 devices
- Add DAC_WaveGeneration and DAC_LFSRUnmask_TriangleAmplitude fields in the DAC_InitTypeDef structure.
- Add DAC_WaveGeneration definitions.
- Add DAC_lfsrunmask_triangleamplitude definitions.
- Add definition for DAC_Channel_2.
- Add DAC_DualSoftwareTriggerCmd(), DAC_WaveGenerationCmd(), DAC_SetChannel2Data(), DAC_SetDualChannelData() for wave generation and dual channel management.
- stm32f0xx_dbgmcu.c/.h: update for STM32F042 and STM32F072 devices
- Add define for DBGMCU_TIM7_STOP.
- Add define for DBGMCU_CAN1_STOP.
- stm32f0xx_dma.c/.h: update for STM32F042 and STM32F072 devices
- Add the support of the DMA channel 6 and DMA Channel 7
- stm32f0xx_exti.c/.h: update for STM32F042 and STM32F072 devices
- Add defines for EXTI Lines 18, 20, 26 and 31.
- stm32f0xx_flash.c/.h: update for STM32F042 and STM32F072 devices
- Add definition for option bytes on the STM32F072 devices.
- Update IS_FLASH_CLEAR_FLAG macro definition.
- Add definition of the BOOT0 and BOOT0_SW option bytes.
- Add FLASH_OB_BOOT0Config() and FLASH_OB_BOOT0SWConfig() function for the BOOT0 Option bytes configuration.
- stm32f0xx_gpio.c/.h: update for STM32F042 and STM32F072 devices
- Add the support of the PortE.
- Update the GPIO_AF definition comments with the new supported alternate functions
- stm32f0xx_pwr.c/.h: update for STM32F042 and STM32F072 devices
- Add definition for Wake up pins 3, 4, 5, 6, 7 and 8.
- Update PWR_EnterSTOPMode() function to support of the SLEEPONEXIT entry mode.
- stm32f0xx_rcc.c/.h: update for STM32F042 and STM32F072 devices
- Replace references to STM32F0XX_MD device definition by STM32F051.
- Add USART2CLK_Frequency and USBCLK_Frequency fields in the RCC_ClocksTypeDef structure.
+
- Add definition of HSE, HSI48 and HSI clocks as new PLL clock sources.
- Add definition of HSI48 clock as system clock source.
- Add definition for USB clock sources.
- Add definition for USART2 clock sources
- Add definition for HSI48 and PLL clock as MCO sources
- Add RCC_HSI48Cmd() and RCC_GetHSI48CalibrationValue() functions for the HSI48 clock source management.
- Add RCC_USBCLKConfig() function for USB clock management.
- Add note to no more use the RCC_ADCCLKConfig() as obsolete, however maintained for legacy purpose. Proper ADC clock configuration is managed by new function ADC_ClockModeConfig() available within the ADC driver.
- stm32f0xx_rtc.c/.h: update for STM32F042 and STM32F072 devices
- Add definition of the Tamper 3.
- Add definiton for the Wake up counter in the RTC output selection
- Add RTC_WakeUpClockConfig(), RTC_SetWakeUpCounter(), RTC_GetWakeUpCounter(), RTC_WakeUpCmd() functions for the wakeup counter configuration.
- stm32f0xx_syscfg.c/.h: update for STM32F042 and STM32F072 devices
- Add definition for EXTI_PortSourceGPIOE.
- Add DMA remap definition for TIM3, TIM2, TIM1, I2C1, USART3, USART2, SPI2.
- Add new DMA remap possibility definition for TIM17 and TIM16.
- Add definition for SYSCFG_I2CFastModePlus_I2C2.
- stm32f0xx_tim.c/.h: update for STM32F042 and STM32F072 devices
- stm32f0xx_usart.c/.h: update for STM32F042 and STM32F072 devices
- Add support of the USART3 and USART4.
V1.2.1 / 22-November-2013
+
+ Main
+Changes
+
+ - Update the support of STM32F030 devices by removing the references to STM32F030x8 and STM32F030x6 devices and replacing them in by STM32F030 in the SYSCFG and GPIO drivers
+
V1.2.0 / 01-Agust-2013
+
+ Main
+Changes
+
+ - Add support of STM32F030x8 and STM32F030x6 devices (STM32F030 devices are microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)
+
V1.1.1 / 31-July-2013
+
+
+
+ Main
+Changes
+
+
+
+ - stm32f0xx_tim.c
- TIM_OC2Init(): add configuration of OC2 output idle state for TIM15
+
+
+ V1.1.0 / 10-May-2013
+
+ Main
+Changes
+
+ - Add support of STM32F0xx Low-density devices (STM32F0XX_LD devices, STM32F050xx and STM32F060xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) and miscellaneous update
+ - stm32f0xx_rcc.c/.h: update for STM32F0XX_LD devices
- Add new function RCC_MCOConfig(uint8_t RCC_MCOSource,
+uint32_t RCC_MCOPrescaler)
+
- RCC_DeInit(): update to reset new bits added in RCC_CFGR register
- stm32f0xx_syscfg.c/.h: update for STM32F0XX_LD devices
- Add defines for "I2C fast mode plus" new AF mapping: SYSCFG_I2CFastModePlus_PA9, SYSCFG_I2CFastModePlus_PA10 and SYSCFG_I2CFastModePlus_I2C1
+
- stm32f0xx_gpio.h: update for STM32F0XX_LD devices
- GPIO_PinAFConfig(): in the function header add reference to I2C1's new AF4 remapping
+
- stm32f0xx_flash.h
- Swap the value of these defines OB_VDDA_ANALOG_ON and OB_VDDA_ANALOG_OFF
- stm32f0xx_misc.c
- NVIC_Init(): remove reference to NVIC_PriorityGroupConfig() function (not available)
+
- stm32f0xx_gpio.h
- Update GPIOSpeed_TypeDef members naming to be in line w/ the Reference Manual
+
- stm32f0xx_exti.c
+ - EXTI_GetITStatus() updated to remove test on IMR register to avoid corner case limitation
+V1.0.2 / 13-July-2012Main
+Changes
+- stm32f0xx_i2c.c/.h
- I2C_SoftwareResetCmd(): update function coding to be in line with I2C software reset procedure recommended in STM32F0xx lasted documentation. As consequence NewState parameter was removed.
- stm32f0xx_flash.c/.h
- Rename FLASH_ProgramOptionByteData() to FLASH_OB_ProgramData()
- Add some legacy defines for compatibility with STM32F10x Flash driver
- stm32f0xx_rtc.c
- RTC_DeInit(): remove unused variable “wutcounter”
- stm32f0xx_spi.c
- File header's comment: add details how to configure the FIFO threshold
V1.0.1 / 20-April-2012Main
+Changes
+- All drivers, function's header: update comments and Doxygen tags formatting
- stm32f0xx_pwr.c
- PWR_PVDLevelConfig()
+function: remove value of the voltage threshold corresponding to each
+PVD detection level, user should refer to the electrical
+characteristics of the STM32F0xx device datasheet to have the correct
+value
- stm32f0xx_usart.c/.h
- USART_Init() function: update baudrate computation to be in line with the formula described in the Reference Manual (RM0091)
- USART_AutoBaudRateNewRequest() function removed
- stm32f0xx_i2c.c
- I2C_GetITStatus() function: add test to check if the interrupt source is enabled or not
V1.0.0 / 23-March-2012Main
+Changes
+- First official release for STM32F0xx devices
- All source files: license disclaimer text update and add link to the License file on ST Internet
- stm32f0xx_comp.h
- Correct values of COMP_Mode parameter
- stm32f0xx_rcc.c/.h
- Add new reset flag V18PWRRSTF in the RCC CSR register
- Add new MCO clock sources (LSI and LSE) and change value of RCC_MCOSource_HSI14
- stm32f0xx_flash.c/.h
- Add new function FLASH_OB_SRAMParityConfig() to manage the SRAM parity enable option bit
- Flash and OB keys moved to stm32f0xx.h file
- stm32f0xx_tim.c/.h
- Add additional input for TIM14 clock (HSE divided by 32 and MCO)
- Miscellaneous enhancement
- stm32f0xx_adc.c/.h
- Miscellaneous update to be in line with bits naming in the Reference Manual (update done also in stm32f0xx.h file)
- stm32f0xx_i2c.c/.h
- Miscellaneous enhancement
+
+ V1.0.0RC1 / 27-January-2012
+ Main
+Changes
+
+
+
+
+
+
+ - Official version (V1.0.0) Release Candidate 1
+
+
+
+
+LicenseLicensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this package except in compliance with the License. You may obtain a copy of the License at:
Unless
+required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT
+WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See
+the License for the specific language governing permissions and
+limitations under the License.
+
+For
+ complete documentation on STM32
+ Microcontrollers visit www.st.com/STM32
+ |
+
+